summaryrefslogtreecommitdiff
path: root/drivers/net/npe/include/IxAtmm.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/npe/include/IxAtmm.h')
-rw-r--r--drivers/net/npe/include/IxAtmm.h771
1 files changed, 0 insertions, 771 deletions
diff --git a/drivers/net/npe/include/IxAtmm.h b/drivers/net/npe/include/IxAtmm.h
deleted file mode 100644
index 805b8c9bd6..0000000000
--- a/drivers/net/npe/include/IxAtmm.h
+++ /dev/null
@@ -1,771 +0,0 @@
-/**
- * @file IxAtmm.h
- *
- * @date 3-DEC-2001
- *
- * @brief Header file for the IXP400 ATM Manager component (IxAtmm)
- *
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier: BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-
-/**
- * @defgroup IxAtmm IXP400 ATM Manager (IxAtmm) API
- *
- * @brief IXP400 ATM Manager component Public API
- *
- * @{
- */
-
-#ifndef IXATMM_H
-#define IXATMM_H
-
-/*
- * Put the user defined include files required
- */
-#include "IxAtmSch.h"
-#include "IxOsalTypes.h"
-
-/*
- * #defines and macros used in this file.
- */
-
-/**
- * @def IX_ATMM_RET_ALREADY_INITIALIZED
- *
- * @brief Component has already been initialized
- */
-#define IX_ATMM_RET_ALREADY_INITIALIZED 2
-
-/**
- * @def IX_ATMM_RET_INVALID_PORT
- *
- * @brief Specified port does not exist or is out of range */
-#define IX_ATMM_RET_INVALID_PORT 3
-
-/**
- * @def IX_ATMM_RET_INVALID_VC_DESCRIPTOR
- *
- * @brief The VC description does not adhere to ATM standards */
-#define IX_ATMM_RET_INVALID_VC_DESCRIPTOR 4
-
-/**
- * @def IX_ATMM_RET_VC_CONFLICT
- *
- * @brief The VPI/VCI values supplied are either reserved, or they
- * conflict with a previously registered VC on this port */
-#define IX_ATMM_RET_VC_CONFLICT 5
-
-/**
- * @def IX_ATMM_RET_PORT_CAPACITY_IS_FULL
- *
- * @brief The virtual connection cannot be established on the port
- * because the remaining port capacity is not sufficient to
- * support it */
-#define IX_ATMM_RET_PORT_CAPACITY_IS_FULL 6
-
-/**
- * @def IX_ATMM_RET_NO_SUCH_VC
- *
- * @brief No registered VC, as described by the supplied VCI/VPI or
- * VC identifier values, exists on this port */
-#define IX_ATMM_RET_NO_SUCH_VC 7
-
-/**
- * @def IX_ATMM_RET_INVALID_VC_ID
- *
- * @brief The specified VC identifier is out of range. */
-#define IX_ATMM_RET_INVALID_VC_ID 8
-
-/**
- * @def IX_ATMM_RET_INVALID_PARAM_PTR
- *
- * @brief A pointer parameter was NULL. */
-#define IX_ATMM_RET_INVALID_PARAM_PTR 9
-
-/**
- * @def IX_ATMM_UTOPIA_SPHY_ADDR
- *
- * @brief The phy address when in SPHY mode */
-#define IX_ATMM_UTOPIA_SPHY_ADDR 31
-
-/**
- * @def IX_ATMM_THREAD_PRI_HIGH
- *
- * @brief The value of high priority thread */
-#define IX_ATMM_THREAD_PRI_HIGH 90
-
-/*
- * Typedefs whose scope is limited to this file.
- */
-
-/** @brief Definition for use in the @ref IxAtmmVc structure.
- * Indicates the direction of a VC */
-typedef enum
-{
- IX_ATMM_VC_DIRECTION_TX=0, /**< Atmm Vc direction transmit*/
- IX_ATMM_VC_DIRECTION_RX, /**< Atmm Vc direction receive*/
- IX_ATMM_VC_DIRECTION_INVALID /**< Atmm Vc direction invalid*/
-} IxAtmmVcDirection;
-
-/** @brief Definition for use with @ref IxAtmmVcChangeCallback
- * callback. Indicates that the event type represented by the
- * callback for this VC. */
-typedef enum
-{
- IX_ATMM_VC_CHANGE_EVENT_REGISTER=0, /**< Atmm Vc event register*/
- IX_ATMM_VC_CHANGE_EVENT_DEREGISTER, /**< Atmm Vc event de-register*/
- IX_ATMM_VC_CHANGE_EVENT_INVALID /**< Atmm Vc event invalid*/
-} IxAtmmVcChangeEvent;
-
-/** @brief Definitions for use with @ref ixAtmmUTOPIAInit interface to
- * indicate that UTOPIA loopback should be enabled or disabled
- * on initialisation. */
-typedef enum
-{
- IX_ATMM_UTOPIA_LOOPBACK_DISABLED=0, /**< Atmm Utopia loopback mode disabled*/
- IX_ATMM_UTOPIA_LOOPBACK_ENABLED, /**< Atmm Utopia loopback mode enabled*/
- IX_ATMM_UTOPIA_LOOPBACK_INVALID /**< Atmm Utopia loopback mode invalid*/
-} IxAtmmUtopiaLoopbackMode;
-
-/** @brief This structure describes the required attributes of a
- * virtual connection.
-*/
-typedef struct {
- unsigned vpi; /**< VPI value of this virtual connection */
- unsigned vci; /**< VCI value of this virtual connection. */
- IxAtmmVcDirection direction; /**< VC direction */
-
- /** Traffic descriptor of this virtual connection. This structure
- * is defined by the @ref IxAtmSch component. */
- IxAtmTrafficDescriptor trafficDesc;
-} IxAtmmVc;
-
-
-/** @brief Definitions for use with @ref ixAtmmUtopiaInit interface to
- * indicate that UTOPIA multi-phy/single-phy mode is used.
- */
-typedef enum
-{
- IX_ATMM_MPHY_MODE = 0, /**< Atmm phy mode mphy*/
- IX_ATMM_SPHY_MODE, /**< Atmm phy mode sphy*/
- IX_ATMM_PHY_MODE_INVALID /**< Atmm phy mode invalid*/
-} IxAtmmPhyMode;
-
-
-/** @brief Structure contains port-specific information required to
- * initialize IxAtmm, and specifically, the IXP400 UTOPIA
- * Level-2 device. */
-typedef struct {
- unsigned reserved_1:11; /**< [31:21] Should be zero */
- unsigned UtopiaTxPhyAddr:5; /**< [20:16] Address of the
- * transmit (Tx) PHY for this
- * port on the 5-bit UTOPIA
- * Level-2 address bus */
- unsigned reserved_2:11; /**< [15:5] Should be zero */
- unsigned UtopiaRxPhyAddr:5; /**< [4:0] Address of the receive
- * (Rx) PHY for this port on the
- * 5-bit UTOPIA Level-2
- * address bus */
-} IxAtmmPortCfg;
-
-/** @brief Callback type used with @ref ixAtmmVcChangeCallbackRegister interface
- * Defines a callback type which will be used to notify registered
- * users of registration/deregistration events on a particular port
- *
- * @param eventType @ref IxAtmmVcChangeEvent [in] - Event indicating
- * whether the VC supplied has been added or
- * removed
- *
- * @param port @ref IxAtmLogicalPort [in] - Specifies the port on which the event has
- * occurred
- *
- * @param vcChanged @ref IxAtmmVc* [in] - Pointer to a structure which gives
- * details of the VC which has been added
- * or removed on the port
- */
-typedef void (*IxAtmmVcChangeCallback) (IxAtmmVcChangeEvent eventType,
- IxAtmLogicalPort port,
- const IxAtmmVc* vcChanged);
-
-/*
- * Variable declarations global to this file only. Externs are followed by
- * static variables.
- */
-
-/*
- * Extern function prototypes
- */
-
-/*
- * Function declarations
- */
-
-
-/**
- * @ingroup IxAtmm
- *
- * @fn ixAtmmInit (void)
- *
- * @brief Interface to initialize the IxAtmm software component. Can
- * be called once only.
- *
- * Must be called before any other IxAtmm API is called.
- *
- * @param "none"
- *
- * @return @li IX_SUCCESS : IxAtmm has been successfully initialized.
- * Calls to other IxAtmm interfaces may now be performed.
- * @return @li IX_FAIL : IxAtmm has already been initialized.
- */
-PUBLIC IX_STATUS
-ixAtmmInit (void);
-
-/**
- * @ingroup IxAtmm
- *
- * @fn ixAtmmUtopiaInit (unsigned numPorts,
- IxAtmmPhyMode phyMode,
- IxAtmmPortCfg portCfgs[],
- IxAtmmUtopiaLoopbackMode loopbackMode)
- *
- * @brief Interface to initialize the UTOPIA Level-2 ATM coprocessor
- * for the specified number of physical ports. The function
- * must be called before the ixAtmmPortInitialize interface
- * can operate successfully.
- *
- * @param numPorts unsigned [in] - Indicates the total number of logical
- * ports that are active on the device. Up to 12 ports are
- * supported.
- *
- * @param phyMode @ref IxAtmmPhyMode [in] - Put the Utopia coprocessor in SPHY
- * or MPHY mode.
- *
- * @param portCfgs[] @ref IxAtmmPortCfg [in] - Pointer to an array of elements
- * detailing the UTOPIA specific port characteristics. The
- * length of the array must be equal to the number of ports
- * activated. ATM ports are referred to by the relevant
- * offset in this array in all subsequent IxAtmm interface
- * calls.
- *
- * @param loopbackMode @ref IxAtmmUtopiaLoopbackMode [in] - Value must be one of
- * @ref IX_ATMM_UTOPIA_LOOPBACK_ENABLED or @ref
- * IX_ATMM_UTOPIA_LOOPBACK_DISABLED indicating whether
- * loopback should be enabled on the device. Loopback can
- * only be supported on a single PHY, therefore the numPorts
- * parameter must be 1 if loopback is enabled.
- *
- * @return @li IX_SUCCESS : Indicates that the UTOPIA device has been
- * successfully initialized for the supplied ports.
- * @return @li IX_ATMM_RET_ALREADY_INITIALIZED : The UTOPIA device has
- * already been initialized.
- * @return @li IX_FAIL : The supplied parameters are invalid or have been
- * rejected by the UTOPIA-NPE device.
- *
- * @warning
- * This interface may only be called once.
- * Port identifiers are assumed to range from 0 to (numPorts - 1) in all
- * instances.
- * In all subsequent calls to interfaces supplied by IxAtmm, the specified
- * port value is expected to represent the offset in the portCfgs array
- * specified in this interface. i.e. The first port in this array will
- * subsequently be represented as port 0, the second port as port 1,
- * and so on.*/
-PUBLIC IX_STATUS
-ixAtmmUtopiaInit (unsigned numPorts,
- IxAtmmPhyMode phyMode,
- IxAtmmPortCfg portCfgs[],
- IxAtmmUtopiaLoopbackMode loopbackMode);
-
-
-/**
- * @ingroup IxAtmm
- *
- * @fn ixAtmmPortInitialize (IxAtmLogicalPort port,
- unsigned txPortRate,
- unsigned rxPortRate)
- *
- * @brief The interface is called following @ref ixAtmmUtopiaInit ()
- * and before calls to any other IxAtmm interface. It serves
- * to activate the registered ATM port with IxAtmm.
- *
- * The transmit and receive port rates are specified in bits per
- * second. This translates to ATM cells per second according to the
- * following formula: CellsPerSecond = portRate / (53*8) The
- * IXP400 device supports only 53 byte cells. The client shall make
- * sure that the off-chip physical layer device has already been
- * initialized.
- *
- * IxAtmm will configure IxAtmdAcc and IxAtmSch to enable scheduling
- * on the port.
- *
- * This interface must be called once for each active port in the
- * system. The first time the interface is invoked, it will configure
- * the mechanism by which the handling of transmit, transmit-done and
- * receive are driven with the IxAtmdAcc component.
- *
- * This function is reentrant.
- *
- * @note The minimum tx rate that will be accepted is 424 bit/s which equates
- * to 1 cell (53 bytes) per second.
- *
- * @param port @ref IxAtmLogicalPort [in] - Identifies the port which is to be
- * initialized.
- *
- * @param txPortRate unsigned [in] - Value specifies the
- * transmit port rate for this port in
- * bits/second. This value is used by the ATM Scheduler
- * component is evaluating VC access requests for the port.
- *
- * @param rxPortRate unsigned [in] - Value specifies the
- * receive port rate for this port in bits/second.
- *
- * @return @li IX_SUCCESS : The specificed ATM port has been successfully
- * initialized. IxAtmm is ready to accept VC registrations on
- * this port.
- *
- * @return @li IX_ATMM_RET_ALREADY_INITIALIZED : ixAtmmPortInitialize has
- * already been called successfully on this port. The current
- * call is rejected.
- *
- * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the
- * input is not valid. The request is rejected.
- *
- * @return @li IX_FAIL : IxAtmm could not initialize the port because the
- * inputs are not understood.
- *
- * @sa ixAtmmPortEnable, ixAtmmPortDisable
- *
- */
-PUBLIC IX_STATUS
-ixAtmmPortInitialize (IxAtmLogicalPort port,
- unsigned txPortRate,
- unsigned rxPortRate);
-
-/**
- * @ingroup IxAtmm
- *
- * @fn ixAtmmPortModify (IxAtmLogicalPort port,
- unsigned txPortRate,
- unsigned rxPortRate)
- *
- * @brief A client may call this interface to change the existing
- * port rate (expressed in bits/second) on an established ATM
- * port.
- *
- * @param port @ref IxAtmLogicalPort [in] - Identifies the port which is to be
- * initialized.
- *
- * @param txPortRate unsigned [in] - Value specifies the``
- * transmit port rate for this port in
- * bits/second. This value is used by the ATM Scheduler
- * component is evaluating VC access requests for the port.
- *
- * @param rxPortRate unsigned [in] - Value specifies the
- * receive port rate for this port in
- * bits/second.
- *
- * @return @li IX_SUCCESS : The indicated ATM port rates have been
- * successfully modified.
- *
- * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the
- * input is not valid. The request is rejected.
- *
- * @return @li IX_FAIL : IxAtmm could not update the port because the
- * inputs are not understood, or the interface was called before
- * the port was initialized. */
-PUBLIC IX_STATUS
-ixAtmmPortModify (IxAtmLogicalPort port,
- unsigned txPortRate,
- unsigned rxPortRate);
-
-/**
- * @ingroup IxAtmm
- *
- * @fn ixAtmmPortQuery (IxAtmLogicalPort port,
- unsigned *txPortRate,
- unsigned *rxPortRate);
-
- *
- * @brief The client may call this interface to request details on
- * currently registered transmit and receive rates for an ATM
- * port.
- *
- * @param port @ref IxAtmLogicalPort [in] - Value identifies the port from which the
- * rate details are requested.
- *
- * @param *txPortRate unsigned [out] - Pointer to a value
- * which will be filled with the value of the transmit port
- * rate specified in bits/second.
- *
- * @param *rxPortRate unsigned [out] - Pointer to a value
- * which will be filled with the value of the receive port
- * rate specified in bits/second.
- *
- * @return @li IX_SUCCESS : The information requested on the specified
- * port has been successfully supplied in the output.
- *
- * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the
- * input is not valid. The request is rejected.
- *
- * @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was
- * NULL.
- *
- * @return @li IX_FAIL : IxAtmm could not update the port because the
- * inputs are not understood, or the interface was called before
- * the port was initialized. */
-PUBLIC IX_STATUS
-ixAtmmPortQuery (IxAtmLogicalPort port,
- unsigned *txPortRate,
- unsigned *rxPortRate);
-
-/**
- * @ingroup IxAtmm
- *
- * @fn ixAtmmPortEnable(IxAtmLogicalPort port)
- *
- * @brief The client call this interface to enable transmit for an ATM
- * port. At initialisation, all the ports are disabled.
- *
- * @param port @ref IxAtmLogicalPort [in] - Value identifies the port
- *
- * @return @li IX_SUCCESS : Transmission over this port is started.
- *
- * @return @li IX_FAIL : The port parameter is not valid, or the
- * port is already enabled
- *
- * @note - When a port is disabled, Rx and Tx VC Connect requests will fail
- *
- * @note - This function uses system resources and should not be used
- * inside an interrupt context.
- *
- * @sa ixAtmmPortDisable */
-PUBLIC IX_STATUS
-ixAtmmPortEnable(IxAtmLogicalPort port);
-
-/**
- * @ingroup IxAtmm
- *
- * @fn ixAtmmPortDisable(IxAtmLogicalPort port)
- *
- * @brief The client call this interface to disable transmit for an ATM
- * port. At initialisation, all the ports are disabled.
- *
- * @param port @ref IxAtmLogicalPort [in] - Value identifies the port
- *
- * @return @li IX_SUCCESS : Transmission over this port is stopped.
- *
- * @return @li IX_FAIL : The port parameter is not valid, or the
- * port is already disabled
- *
- * @note - When a port is disabled, Rx and Tx VC Connect requests will fail
- *
- * @note - This function call does not stop RX traffic. It is supposed
- * that this function is invoked when a serious problem
- * is detected (e.g. physical layer broken). Then, the RX traffic
- * is not passing.
- *
- * @note - This function is blocking until the hw acknowledge that the
- * transmission is stopped.
- *
- * @note - This function uses system resources and should not be used
- * inside an interrupt context.
- *
- * @sa ixAtmmPortEnable */
-PUBLIC IX_STATUS
-ixAtmmPortDisable(IxAtmLogicalPort port);
-
-/**
- * @ingroup IxAtmm
- *
- * @fn ixAtmmVcRegister (IxAtmLogicalPort port,
- IxAtmmVc *vcToAdd,
- IxAtmSchedulerVcId *vcId)
- *
- * @brief This interface is used to register an ATM Virtual
- * Connection on the specified ATM port.
- *
- * Each call to this interface registers a unidirectional virtual
- * connection with the parameters specified. If a bi-directional VC
- * is needed, the function should be called twice (once for each
- * direction, Tx & Rx) where the VPI and VCI and port parameters in
- * each call are identical.
- *
- * With the addition of each new VC to a port, a series of
- * callback functions are invoked by the IxAtmm component to notify
- * possible external components of the change. The callback functions
- * are registered using the @ref ixAtmmVcChangeCallbackRegister interface.
- *
- * The IxAtmSch component is notified of the registration of transmit
- * VCs.
- *
- * @param port @ref IxAtmLogicalPort [in] - Identifies port on which the specified VC is
- * to be registered.
- *
- * @param *vcToAdd @ref IxAtmmVc [in] - Pointer to an @ref IxAtmmVc structure
- * containing a description of the VC to be registered. The
- * client shall fill the vpi, vci and direction and relevant
- * trafficDesc members of this structure before calling this
- * function.
- *
- * @param *vcId @ref IxAtmSchedulerVcId [out] - Pointer to an integer value which is filled
- * with the per-port unique identifier value for this VC.
- * This identifier will be required when a request is
- * made to deregister or change this VC. VC identifiers
- * for transmit VCs will have a value between 0-43,
- * i.e. 32 data Tx VCs + 12 OAM Tx Port VCs.
- * Receive VCs will have a value between 44-66,
- * i.e. 32 data Rx VCs + 1 OAM Rx VC.
- *
- * @return @li IX_SUCCESS : The VC has been successfully registered on
- * this port. The VC is ready for a client to configure IxAtmdAcc
- * for receive and transmit operations on the VC.
- * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the
- * input is not valid or has not been initialized. The request
- * is rejected.
- * @return @li IX_ATMM_RET_INVALID_VC_DESCRIPTOR : The descriptor
- * pointed to by vcToAdd is invalid. The registration request
- * is rejected.
- * @return @li IX_ATMM_RET_VC_CONFLICT : The VC requested conflicts with
- * reserved VPI and/or VCI values or with another VC already activated
- * on this port.
- * @return @li IX_ATMM_RET_PORT_CAPACITY_IS_FULL : The VC cannot be
- * registered in the port becuase the port capacity is
- * insufficient to support the requested ATM traffic contract.
- * The registration request is rejected.
- * @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was
- * NULL.
- *
- * @warning IxAtmm has no capability of signaling or negotiating a virtual
- * connection. Negotiation of the admission of the VC to the network
- * is beyond the scope of this function. This is assumed to be
- * performed by the calling client, if appropriate,
- * before or after this function is called.
- */
-PUBLIC IX_STATUS
-ixAtmmVcRegister (IxAtmLogicalPort port,
- IxAtmmVc *vcToAdd,
- IxAtmSchedulerVcId *vcId);
-
-/**
- * @ingroup IxAtmm
- *
- * @fn ixAtmmVcDeregister (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId)
- *
- * @brief Function called by a client to deregister a VC from the
- * system.
- *
- * With the removal of each new VC from a port, a series of
- * registered callback functions are invoked by the IxAtmm component
- * to notify possible external components of the change. The callback
- * functions are registered using the @ref ixAtmmVcChangeCallbackRegister.
- *
- * The IxAtmSch component is notified of the removal of transmit VCs.
- *
- * @param port @ref IxAtmLogicalPort [in] - Identifies port on which the VC to be
- * removed is currently registered.
- *
- * @param vcId @ref IxAtmSchedulerVcId [in] - VC identifier value of the VC to
- * be deregistered. This value was supplied to the client when
- the VC was originally registered. This value can also be
- queried from the IxAtmm component through the @ref ixAtmmVcQuery
- * interface.
- *
- * @return @li IX_SUCCESS : The specified VC has been successfully
- * removed from this port.
- * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the
- * input is not valid or has not been initialized. The request
- * is rejected.
- * @return @li IX_FAIL : There is no registered VC associated with the
- * supplied identifier registered on this port. */
-PUBLIC IX_STATUS
-ixAtmmVcDeregister (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId);
-
-/**
- * @ingroup IxAtmm
- *
- * @fn ixAtmmVcQuery (IxAtmLogicalPort port,
- unsigned vpi,
- unsigned vci,
- IxAtmmVcDirection direction,
- IxAtmSchedulerVcId *vcId,
- IxAtmmVc *vcDesc)
- *
- * @brief This interface supplies information about an active VC on a
- * particular port when supplied with the VPI, VCI and
- * direction of that VC.
- *
- * @param port @ref IxAtmLogicalPort [in] - Identifies port on which the VC to be
- * queried is currently registered.
- *
- * @param vpi unsigned [in] - ATM VPI value of the requested VC.
- *
- * @param vci unsigned [in] - ATM VCI value of the requested VC.
- *
- * @param direction @ref IxAtmmVcDirection [in] - One of @ref
- * IX_ATMM_VC_DIRECTION_TX or @ref IX_ATMM_VC_DIRECTION_RX
- * indicating the direction (Tx or Rx) of the requested VC.
- *
- * @param *vcId @ref IxAtmSchedulerVcId [out] - Pointer to an integer value which will be
- * filled with the VC identifier value for the requested
- * VC (as returned by @ref ixAtmmVcRegister), if it
- * exists on this port.
- *
- * @param *vcDesc @ref IxAtmmVc [out] - Pointer to an @ref IxAtmmVc structure
- * which will be filled with the specific details of the
- * requested VC, if it exists on this port.
- *
- * @return @li IX_SUCCESS : The specified VC has been found on this port
- * and the requested details have been returned.
- * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the
- * input is not valid or has not been initialized. The request
- * is rejected.
- * @return @li IX_ATMM_RET_NO_SUCH_VC : No VC exists on the specified
- * port which matches the search criteria (VPI, VCI, direction)
- * given. No data is returned.
- * @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was
- * NULL.
- *
- */
-PUBLIC IX_STATUS
-ixAtmmVcQuery (IxAtmLogicalPort port,
- unsigned vpi,
- unsigned vci,
- IxAtmmVcDirection direction,
- IxAtmSchedulerVcId *vcId,
- IxAtmmVc *vcDesc);
-
-
-/**
- * @ingroup IxAtmm
- *
- * @fn ixAtmmVcIdQuery (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId, IxAtmmVc *vcDesc)
- *
- * @brief This interface supplies information about an active VC on a
- * particular port when supplied with a vcId for that VC.
- *
- * @param port @ref IxAtmLogicalPort [in] - Identifies port on which the VC to be
- * queried is currently registered.
- *
- * @param vcId @ref IxAtmSchedulerVcId [in] - Value returned by @ref ixAtmmVcRegister which
- * uniquely identifies the requested VC on this port.
- *
- * @param *vcDesc @ref IxAtmmVc [out] - Pointer to an @ref IxAtmmVc structure
- * which will be filled with the specific details of the
- * requested VC, if it exists on this port.
- *
- * @return @li IX_SUCCESS : The specified VC has been found on this port
- * and the requested details have been returned.
- * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the
- * input is not valid or has not been initialized. The request
- * is rejected.
- * @return @li IX_ATMM_RET_NO_SUCH_VC : No VC exists on the specified
- * port which matches the supplied identifier. No data is
- * returned.
- * @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was
- * NULL.
- */
-PUBLIC IX_STATUS
-ixAtmmVcIdQuery (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId, IxAtmmVc *vcDesc);
-
-/**
- * @ingroup IxAtmm
- *
- * @fn ixAtmmVcChangeCallbackRegister (IxAtmmVcChangeCallback callback)
- *
- * @brief This interface is invoked to supply a function to IxAtmm
- * which will be called to notify the client if a new VC is
- * registered with IxAtmm or an existing VC is removed.
- *
- * The callback, when invoked, will run within the context of the call
- * to @ref ixAtmmVcRegister or @ref ixAtmmVcDeregister which caused
- * the change of state.
- *
- * A maximum of 32 calbacks may be registered in with IxAtmm.
- *
- * @param callback @ref IxAtmmVcChangeCallback [in] - Callback which complies
- * with the @ref IxAtmmVcChangeCallback definition. This
- * function will be invoked by IxAtmm with the appropiate
- * parameters for the relevant VC when any VC has been
- * registered or deregistered with IxAtmm.
- *
- * @return @li IX_SUCCESS : The specified callback has been registered
- * successfully with IxAtmm and will be invoked when appropriate.
- * @return @li IX_FAIL : Either the supplied callback is invalid, or
- * IxAtmm has already registered 32 and connot accommodate
- * any further registrations of this type. The request is
- * rejected.
- *
- * @warning The client must not call either the @ref
- * ixAtmmVcRegister or @ref ixAtmmVcDeregister interfaces
- * from within the supplied callback function. */
-PUBLIC IX_STATUS ixAtmmVcChangeCallbackRegister (IxAtmmVcChangeCallback callback);
-
-
-/**
- * @ingroup IxAtmm
- *
- * @fn ixAtmmVcChangeCallbackDeregister (IxAtmmVcChangeCallback callback)
- *
- * @brief This interface is invoked to deregister a previously supplied
- * callback function.
- *
- * @param callback @ref IxAtmmVcChangeCallback [in] - Callback which complies
- * with the @ref IxAtmmVcChangeCallback definition. This
- * function will removed from the table of callbacks.
- *
- * @return @li IX_SUCCESS : The specified callback has been deregistered
- * successfully from IxAtmm.
- * @return @li IX_FAIL : Either the supplied callback is invalid, or
- * is not currently registered with IxAtmm.
- */
-PUBLIC IX_STATUS
-ixAtmmVcChangeCallbackDeregister (IxAtmmVcChangeCallback callback);
-
-/**
- * @ingroup IxAtmm
- *
- * @fn ixAtmmUtopiaStatusShow (void)
- *
- * @brief Display utopia status counters
- *
- * @param "none"
- *
- * @return @li IX_SUCCESS : Show function was successful
- * @return @li IX_FAIL : Internal failure
- */
-PUBLIC IX_STATUS
-ixAtmmUtopiaStatusShow (void);
-
-/**
- * @ingroup IxAtmm
- *
- * @fn ixAtmmUtopiaCfgShow (void)
- *
- * @brief Display utopia information(config registers and status registers)
- *
- * @param "none"
- *
- * @return @li IX_SUCCESS : Show function was successful
- * @return @li IX_FAIL : Internal failure
- */
-PUBLIC IX_STATUS
-ixAtmmUtopiaCfgShow (void);
-
-#endif
-/* IXATMM_H */
-
-/** @} */