summaryrefslogtreecommitdiff
path: root/doc/README.nand
diff options
context:
space:
mode:
Diffstat (limited to 'doc/README.nand')
-rw-r--r--doc/README.nand21
1 files changed, 21 insertions, 0 deletions
diff --git a/doc/README.nand b/doc/README.nand
index c130189587..a1a511c533 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -108,6 +108,9 @@ Configuration Options:
CONFIG_CMD_NAND
Enables NAND support and commmands.
+ CONFIG_CMD_NAND_TORTURE
+ Enables the torture command (see description of this command below).
+
CONFIG_MTD_NAND_ECC_JFFS2
Define this if you want the Error Correction Code information in
the out-of-band data to be formatted to match the JFFS2 file system.
@@ -213,6 +216,24 @@ Miscellaneous and testing commands:
DANGEROUS!!! Factory set bad blocks will be lost. Use only
to remove artificial bad blocks created with the "markbad" command.
+ "torture offset"
+ Torture block to determine if it is still reliable.
+ Enabled by the CONFIG_CMD_NAND_TORTURE configuration option.
+ This command returns 0 if the block is still reliable, else 1.
+ If the block is detected as unreliable, it is up to the user to decide to
+ mark this block as bad.
+ The analyzed block is put through 3 erase / write cycles (or less if the block
+ is detected as unreliable earlier).
+ This command can be used in scripts, e.g. together with the markbad command to
+ automate retries and handling of possibly newly detected bad blocks if the
+ nand write command fails.
+ It can also be used manually by users having seen some NAND errors in logs to
+ search the root cause of these errors.
+ The underlying nand_torture() function is also useful for code willing to
+ automate actions following a nand->write() error. This would e.g. be required
+ in order to program or update safely firmware to NAND, especially for the UBI
+ part of such firmware.
+
NAND locking command (for chips with active LOCKPRE pin)