1 files changed, 0 insertions, 124 deletions
diff --git a/board/r5200/r5200.c b/board/r5200/r5200.c
deleted file mode 100644
index 69f3a765b6..0000000000
--- a/board/r5200/r5200.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/m5271.h>
-#include <asm/immap_5271.h>
-
-
-int checkboard (void) {
-	puts ("Board: R5200 Ethernet Module\n");
-	return 0;
-};
-
-long int initdram (int board_type) {
-	int i;
-
-	/*
-	 *  Set CS2 pin to be SD_CS0
-	 */
-	mbar_writeByte(MCF_GPIO_PAR_CS, mbar_readByte(MCF_GPIO_PAR_CS)
-			| MCF_GPIO_PAR_CS_PAR_CS2);
-
-	mbar_writeByte(MCF_GPIO_PAR_SDRAM, mbar_readByte(MCF_GPIO_PAR_SDRAM)
-			| MCF_GPIO_PAR_SDRAM_PAR_CSSDCS(0x01));
-
-	/*
-	 * Check to see if the SDRAM has already been initialized
-	 * by a run control tool
-	 */
-	if (!(mbar_readLong(MCF_SDRAMC_DACR0) & MCF_SDRAMC_DACRn_RE)) {
-		/*
-		 * Initialize DRAM Control Register: DCR
-		 */
-		mbar_writeShort(MCF_SDRAMC_DCR, MCF_SDRAMC_DCR_RTIM(0x01)
-				| MCF_SDRAMC_DCR_RC(0x30));
-
-		/*
-		 * Initialize DACR0
-		 */
-		mbar_writeLong(MCF_SDRAMC_DACR0,
-				MCF_SDRAMC_DACRn_BA(CFG_SDRAM_BASE>>18)
-				| MCF_SDRAMC_DACRn_CASL(0)
-				| MCF_SDRAMC_DACRn_CBM(3)
-				| MCF_SDRAMC_DACRn_PS(2));
-
-		/*
-		 * Initialize DMR0
-		 */
-		mbar_writeLong(MCF_SDRAMC_DMR0,
-				MCF_SDRAMC_DMRn_BAM_8M
-				| MCF_SDRAMC_DMRn_V);
-
-		/*
-		 * Set IP bit in DACR
-		 */
-		mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0)
-				| MCF_SDRAMC_DACRn_IP);
-
-		/*
-		 * Wait at least 20ns to allow banks to precharge
-		 */
-		for (i = 0; i < 5; i++)
-			asm(" nop");
-
-		/*
-		 * Write to this block to initiate precharge
-		 */
-		*(u16 *)(CFG_SDRAM_BASE) = 0x9696;
-
-		/*
-		 * Set RE bit in DACR
-		 */
-		mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0)
-				| MCF_SDRAMC_DACRn_RE);
-
-
-		/*
-		 * Wait for at least 8 auto refresh cycles to occur
-		 */
-		for (i = 0; i < 2000; i++)
-			asm(" nop");
-
-		/*
-		 * Finish the configuration by issuing the MRS.
-		 */
-		mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0)
-				| MCF_SDRAMC_DACRn_MRS);
-
-
-		/*
-		 * Write to the SDRAM Mode Register
-		 */
-		*(u16 *)(CFG_SDRAM_BASE + 0x1000) = 0x9696;
-	}
-
-	return CFG_SDRAM_SIZE * 1024 * 1024;
-};
-
-int testdram (void) {
-	/* TODO: XXX XXX XXX */
-	printf ("DRAM test not implemented!\n");
-
-	return (0);
-}