summaryrefslogtreecommitdiff
path: root/board/esd/pmc440/pmc440.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/esd/pmc440/pmc440.c')
-rw-r--r--board/esd/pmc440/pmc440.c898
1 files changed, 898 insertions, 0 deletions
diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c
new file mode 100644
index 0000000000..edf3a140b5
--- /dev/null
+++ b/board/esd/pmc440/pmc440.c
@@ -0,0 +1,898 @@
+/*
+ * (C) Copyright 2007
+ * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com.
+ * Based on board/amcc/sequoia/sequoia.c
+ *
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <ppc440.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <command.h>
+#include <i2c.h>
+#ifdef CONFIG_RESET_PHY_R
+#include <miiphy.h>
+#endif
+#include <serial.h>
+#include "fpga.h"
+#include "pmc440.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+ulong flash_get_size(ulong base, int banknum);
+int pci_is_66mhz(void);
+int bootstrap_eeprom_read(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
+
+
+struct serial_device *default_serial_console(void)
+{
+ uchar buf[4];
+ ulong delay;
+ int i;
+ ulong val;
+
+ /*
+ * Use default console on P4 when strapping jumper
+ * is installed (bootstrap option != 'H').
+ */
+ mfsdr(SDR_PINSTP, val);
+ if (((val & 0xf0000000) >> 29) != 7)
+ return &serial1_device;
+
+ ulong scratchreg = in_be32((void*)GPIO0_ISR3L);
+ if (!(scratchreg & 0x80)) {
+ /* mark scratchreg valid */
+ scratchreg = (scratchreg & 0xffffff00) | 0x80;
+
+ i = bootstrap_eeprom_read(CFG_I2C_BOOT_EEPROM_ADDR, 0x10, buf, 4);
+ if ((i != -1) && (buf[0] == 0x19) && (buf[1] == 0x75)) {
+ scratchreg |= buf[2];
+
+ /* bringup delay for console */
+ for (delay=0; delay<(1000 * (ulong)buf[3]); delay++) {
+ udelay(1000);
+ }
+ } else
+ scratchreg |= 0x01;
+ out_be32((void*)GPIO0_ISR3L, scratchreg);
+ }
+
+ if (scratchreg & 0x01)
+ return &serial1_device;
+ else
+ return &serial0_device;
+}
+
+int board_early_init_f(void)
+{
+ u32 sdr0_cust0;
+ u32 sdr0_pfc1, sdr0_pfc2;
+ u32 reg;
+
+ /* general EBC configuration (disable EBC timeouts) */
+ mtdcr(ebccfga, xbcfg);
+ mtdcr(ebccfgd, 0xf8400000);
+
+ /*--------------------------------------------------------------------
+ * Setup the GPIO pins
+ * TODO: setup GPIOs via CFG_4xx_GPIO_TABLE in board's config file
+ *-------------------------------------------------------------------*/
+ out32(GPIO0_OR, 0x40000002);
+ out32(GPIO0_TCR, 0x4c90011f);
+ out32(GPIO0_OSRL, 0x28011400);
+ out32(GPIO0_OSRH, 0x55005000);
+ out32(GPIO0_TSRL, 0x08011400);
+ out32(GPIO0_TSRH, 0x55005000);
+ out32(GPIO0_ISR1L, 0x54000000);
+ out32(GPIO0_ISR1H, 0x00000000);
+ out32(GPIO0_ISR2L, 0x44000000);
+ out32(GPIO0_ISR2H, 0x00000100);
+ out32(GPIO0_ISR3L, 0x00000000);
+ out32(GPIO0_ISR3H, 0x00000000);
+
+ out32(GPIO1_OR, 0x80002408);
+ out32(GPIO1_TCR, 0xd6003c08);
+ out32(GPIO1_OSRL, 0x0a5a0000);
+ out32(GPIO1_OSRH, 0x00000000);
+ out32(GPIO1_TSRL, 0x00000000);
+ out32(GPIO1_TSRH, 0x00000000);
+ out32(GPIO1_ISR1L, 0x00005555);
+ out32(GPIO1_ISR1H, 0x40000000);
+ out32(GPIO1_ISR2L, 0x04010000);
+ out32(GPIO1_ISR2H, 0x00000000);
+ out32(GPIO1_ISR3L, 0x01400000);
+ out32(GPIO1_ISR3H, 0x00000000);
+
+ /* patch PLB:PCI divider for 66MHz PCI */
+ mfcpr(clk_spcid, reg);
+ if (pci_is_66mhz() && (reg != 0x02000000)) {
+ mtcpr(clk_spcid, 0x02000000); /* 133MHZ : 2 for 66MHz PCI */
+
+ mfcpr(clk_icfg, reg);
+ reg |= CPR0_ICFG_RLI_MASK;
+ mtcpr(clk_icfg, reg);
+
+ mtspr(dbcr0, 0x20000000); /* do chip reset */
+ }
+
+ /*--------------------------------------------------------------------
+ * Setup the interrupt controller polarities, triggers, etc.
+ *-------------------------------------------------------------------*/
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+ mtdcr(uic0er, 0x00000000); /* disable all */
+ mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
+ mtdcr(uic0pr, 0xfffff7ef);
+ mtdcr(uic0tr, 0x00000000);
+ mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(uic1er, 0x00000000); /* disable all */
+ mtdcr(uic1cr, 0x00000000); /* all non-critical */
+ mtdcr(uic1pr, 0xffffc7f5);
+ mtdcr(uic1tr, 0x00000000);
+ mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic2sr, 0xffffffff); /* clear all */
+ mtdcr(uic2er, 0x00000000); /* disable all */
+ mtdcr(uic2cr, 0x00000000); /* all non-critical */
+ mtdcr(uic2pr, 0x27ffffff);
+ mtdcr(uic2tr, 0x00000000);
+ mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(uic2sr, 0xffffffff); /* clear all */
+
+ /* select Ethernet pins */
+ mfsdr(SDR0_PFC1, sdr0_pfc1);
+ sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | SDR0_PFC1_SELECT_CONFIG_4;
+ mfsdr(SDR0_PFC2, sdr0_pfc2);
+ sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | SDR0_PFC2_SELECT_CONFIG_4;
+
+ /* enable 2nd IIC */
+ sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL;
+
+ mtsdr(SDR0_PFC2, sdr0_pfc2);
+ mtsdr(SDR0_PFC1, sdr0_pfc1);
+
+ /* setup NAND FLASH */
+ mfsdr(SDR0_CUST0, sdr0_cust0);
+ sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL |
+ SDR0_CUST0_NDFC_ENABLE |
+ SDR0_CUST0_NDFC_BW_8_BIT |
+ SDR0_CUST0_NDFC_ARE_MASK |
+ (0x80000000 >> (28 + CFG_NAND_CS));
+ mtsdr(SDR0_CUST0, sdr0_cust0);
+
+ return 0;
+}
+
+/*---------------------------------------------------------------------------+
+ | misc_init_r.
+ +---------------------------------------------------------------------------*/
+int misc_init_r(void)
+{
+ uint pbcr;
+ int size_val = 0;
+ u32 reg;
+ unsigned long usb2d0cr = 0;
+ unsigned long usb2phy0cr, usb2h0cr = 0;
+ unsigned long sdr0_pfc1;
+ char *act = getenv("usbact");
+
+ /*
+ * FLASH stuff...
+ */
+
+ /* Re-do sizing to get full correct info */
+
+ /* adjust flash start and offset */
+ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
+ gd->bd->bi_flashoffset = 0;
+
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+ mtdcr(ebccfga, pb2cr);
+#else
+ mtdcr(ebccfga, pb0cr);
+#endif
+ pbcr = mfdcr(ebccfgd);
+ switch (gd->bd->bi_flashsize) {
+ case 1 << 20:
+ size_val = 0;
+ break;
+ case 2 << 20:
+ size_val = 1;
+ break;
+ case 4 << 20:
+ size_val = 2;
+ break;
+ case 8 << 20:
+ size_val = 3;
+ break;
+ case 16 << 20:
+ size_val = 4;
+ break;
+ case 32 << 20:
+ size_val = 5;
+ break;
+ case 64 << 20:
+ size_val = 6;
+ break;
+ case 128 << 20:
+ size_val = 7;
+ break;
+ }
+ pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+ mtdcr(ebccfga, pb2cr);
+#else
+ mtdcr(ebccfga, pb0cr);
+#endif
+ mtdcr(ebccfgd, pbcr);
+
+ /*
+ * Re-check to get correct base address
+ */
+ flash_get_size(gd->bd->bi_flashstart, 0);
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ -CFG_MONITOR_LEN,
+ 0xffffffff,
+ &flash_info[0]);
+
+ /* Env protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+#endif
+
+ /*
+ * USB suff...
+ */
+ if ((act == NULL || strcmp(act, "hostdev") == 0) &&
+ !(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)){
+ /* SDR Setting */
+ mfsdr(SDR0_PFC1, sdr0_pfc1);
+ mfsdr(SDR0_USB2D0CR, usb2d0cr);
+ mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+ mfsdr(SDR0_USB2H0CR, usb2h0cr);
+
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
+
+ /* An 8-bit/60MHz interface is the only possible alternative
+ when connecting the Device to the PHY */
+ usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
+ usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/
+
+ usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
+ sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
+
+ mtsdr(SDR0_PFC1, sdr0_pfc1);
+ mtsdr(SDR0_USB2D0CR, usb2d0cr);
+ mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+ mtsdr(SDR0_USB2H0CR, usb2h0cr);
+
+ /*clear resets*/
+ udelay(1000);
+ mtsdr(SDR0_SRST1, 0x00000000);
+ udelay(1000);
+ mtsdr(SDR0_SRST0, 0x00000000);
+
+ printf("USB: Host\n");
+
+ } else if ((strcmp(act, "dev") == 0) || (in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)) {
+ /*-------------------PATCH-------------------------------*/
+ mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
+ mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+
+ udelay (1000);
+ mtsdr(SDR0_SRST1, 0x672c6000);
+
+ udelay (1000);
+ mtsdr(SDR0_SRST0, 0x00000080);
+
+ udelay (1000);
+ mtsdr(SDR0_SRST1, 0x60206000);
+
+ *(unsigned int *)(0xe0000350) = 0x00000001;
+
+ udelay (1000);
+ mtsdr(SDR0_SRST1, 0x60306000);
+ /*-------------------PATCH-------------------------------*/
+
+ /* SDR Setting */
+ mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+ mfsdr(SDR0_USB2H0CR, usb2h0cr);
+ mfsdr(SDR0_USB2D0CR, usb2d0cr);
+ mfsdr(SDR0_PFC1, sdr0_pfc1);
+
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; /*1*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV; /*0*/
+
+ usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
+ usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ; /*0*/
+
+ usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
+
+ sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
+ sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL; /*1*/
+
+ mtsdr(SDR0_USB2H0CR, usb2h0cr);
+ mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+ mtsdr(SDR0_USB2D0CR, usb2d0cr);
+ mtsdr(SDR0_PFC1, sdr0_pfc1);
+
+ /*clear resets*/
+ udelay(1000);
+ mtsdr(SDR0_SRST1, 0x00000000);
+ udelay(1000);
+ mtsdr(SDR0_SRST0, 0x00000000);
+
+ printf("USB: Device\n");
+ }
+
+ /*
+ * Clear PLB4A0_ACR[WRP]
+ * This fix will make the MAL burst disabling patch for the Linux
+ * EMAC driver obsolete.
+ */
+ reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP;
+ mtdcr(plb4_acr, reg);
+
+#ifdef CONFIG_FPGA
+ pmc440_init_fpga();
+#endif
+
+ /* turn off POST LED */
+ out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_POST_N);
+ /* turn on RUN LED */
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~GPIO0_LED_RUN_N);
+ return 0;
+}
+
+int is_monarch(void)
+{
+ if (in_be32((void*)GPIO1_IR) & GPIO1_NONMONARCH)
+ return 0;
+
+ return 1;
+}
+
+int pci_is_66mhz(void)
+{
+ if (in_be32((void*)GPIO1_IR) & GPIO1_M66EN)
+ return 1;
+ return 0;
+}
+
+int board_revision(void)
+{
+ return (int)((in_be32((void*)GPIO1_IR) & GPIO1_HWID_MASK) >> 4);
+}
+
+int checkboard(void)
+{
+ puts("Board: esd GmbH - PMC440");
+
+ gd->board_type = board_revision();
+ printf(", Rev 1.%ld, ", gd->board_type);
+
+ if (!is_monarch()) {
+ puts("non-");
+ }
+
+ printf("monarch, PCI=%s MHz\n", pci_is_66mhz() ? "66" : "33");
+ return (0);
+}
+
+
+#if defined(CONFIG_PCI) && defined(CONFIG_PCI_PNP)
+/*
+ * Assign interrupts to PCI devices. Some OSs rely on this.
+ */
+void pmc440_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+{
+ unsigned char int_line[] = {IRQ_PCIC, IRQ_PCID, IRQ_PCIA, IRQ_PCIB};
+
+ pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE,
+ int_line[PCI_DEV(dev) & 0x03]);
+}
+#endif
+
+/*************************************************************************
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int pci_pre_init(struct pci_controller *hose)
+{
+ unsigned long addr;
+
+ /*-------------------------------------------------------------------------+
+ | Set priority for all PLB3 devices to 0.
+ | Set PLB3 arbiter to fair mode.
+ +-------------------------------------------------------------------------*/
+ mfsdr(sdr_amp1, addr);
+ mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(plb3_acr);
+ mtdcr(plb3_acr, addr | 0x80000000);
+
+ /*-------------------------------------------------------------------------+
+ | Set priority for all PLB4 devices to 0.
+ +-------------------------------------------------------------------------*/
+ mfsdr(sdr_amp0, addr);
+ mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
+ mtdcr(plb4_acr, addr);
+
+ /*-------------------------------------------------------------------------+
+ | Set Nebula PLB4 arbiter to fair mode.
+ +-------------------------------------------------------------------------*/
+ /* Segment0 */
+ addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
+ addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
+ addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
+ addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
+ mtdcr(plb0_acr, addr);
+
+ /* Segment1 */
+ addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
+ addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
+ addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
+ addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
+ mtdcr(plb1_acr, addr);
+
+#ifdef CONFIG_PCI_PNP
+ hose->fixup_irq = pmc440_pci_fixup_irq;
+#endif
+
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) */
+
+/*************************************************************************
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller *hose)
+{
+ /*--------------------------------------------------------------------------+
+ * Set up Direct MMIO registers
+ *--------------------------------------------------------------------------*/
+ /*--------------------------------------------------------------------------+
+ | PowerPC440EPX PCI Master configuration.
+ | Map one 1Gig range of PLB/processor addresses to PCI memory space.
+ | PLB address 0x80000000-0xBFFFFFFF ==> PCI address 0x80000000-0xBFFFFFFF
+ | Use byte reversed out routines to handle endianess.
+ | Make this region non-prefetchable.
+ +--------------------------------------------------------------------------*/
+ out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
+ out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
+ out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_PMM0MA, 0xc0000001); /* 1G + No prefetching, and enable region */
+
+ if (!is_monarch()) {
+ /* BAR1: top 64MB of RAM */
+ out32r(PCIX0_PTM1MS, 0xfc000001); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM1LA, 0x0c000000); /* Local Addr. Reg */
+ } else {
+ /* BAR1: complete 256MB RAM (TODO: make dynamic) */
+ out32r(PCIX0_PTM1MS, 0xf0000001); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM1LA, 0x00000000); /* Local Addr. Reg */
+ }
+
+ /* BAR2: 16 MB FPGA registers */
+ out32r(PCIX0_PTM2MS, 0xff000001); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM2LA, 0xef000000); /* Local Addr. Reg */
+
+ if (is_monarch()) {
+ /* BAR2: map FPGA registers behind system memory at 1GB */
+ pci_write_config_dword(0, PCI_BASE_ADDRESS_2, 0x40000008);
+ }
+
+ /*--------------------------------------------------------------------------+
+ * Set up Configuration registers
+ *--------------------------------------------------------------------------*/
+
+ /* Program the board's vendor id */
+ pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
+ CFG_PCI_SUBSYS_VENDORID);
+
+#if 0 /* disabled for PMC405 backward compatibility */
+ /* Configure command register as bus master */
+ pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
+#endif
+
+ /* 240nS PCI clock */
+ pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+
+ /* No error reporting */
+ pci_write_config_word(0, PCI_ERREN, 0);
+
+ pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
+
+ if (!is_monarch()) {
+ /* Program the board's subsystem id/classcode */
+ pci_write_config_word(0, PCI_SUBSYSTEM_ID,
+ CFG_PCI_SUBSYS_ID_NONMONARCH);
+ pci_write_config_word(0, PCI_CLASS_SUB_CODE,
+ CFG_PCI_CLASSCODE_NONMONARCH);
+
+ /* PCI configuration done: release ERREADY */
+ out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_PPC_EREADY);
+ out_be32((void*)GPIO1_TCR, in_be32((void*)GPIO1_TCR) | GPIO1_PPC_EREADY);
+ } else {
+ /* Program the board's subsystem id/classcode */
+ pci_write_config_word(0, PCI_SUBSYSTEM_ID,
+ CFG_PCI_SUBSYS_ID_MONARCH);
+ pci_write_config_word(0, PCI_CLASS_SUB_CODE,
+ CFG_PCI_CLASSCODE_MONARCH);
+ }
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ * pci_master_init
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+void pci_master_init(struct pci_controller *hose)
+{
+ unsigned short temp_short;
+
+ /*--------------------------------------------------------------------------+
+ | Write the PowerPC440 EP PCI Configuration regs.
+ | Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+ | Enable PowerPC440 EP to act as a PCI memory target (PTM).
+ +--------------------------------------------------------------------------*/
+ if (is_monarch()) {
+ pci_read_config_word(0, PCI_COMMAND, &temp_short);
+ pci_write_config_word(0, PCI_COMMAND,
+ temp_short | PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY);
+ }
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+
+
+static void wait_for_pci_ready(void)
+{
+ int i;
+ char *s = getenv("pcidelay");
+ if (s) {
+ int ms = simple_strtoul(s, NULL, 10);
+ printf("PCI: Waiting for %d ms\n", ms);
+ for (i=0; i<ms; i++)
+ udelay(1000);
+ }
+
+ if (!(in_be32((void*)GPIO1_IR) & GPIO1_PPC_EREADY)) {
+ printf("PCI: Waiting for EREADY (CTRL-C to skip) ... ");
+ while (1) {
+ if (ctrlc()) {
+ puts("abort\n");
+ break;
+ }
+ if (in_be32((void*)GPIO1_IR) & GPIO1_PPC_EREADY) {
+ printf("done\n");
+ break;
+ }
+ }
+ }
+}
+
+
+/*************************************************************************
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+ char *s = getenv("pciscan");
+ if (s == NULL)
+ if (is_monarch()) {
+ wait_for_pci_ready();
+ return 1;
+ } else
+ return 0;
+ else if (!strcmp(s, "yes"))
+ return 1;
+
+ return 0;
+}
+#endif /* defined(CONFIG_PCI) */
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+ return 0; /* No hotkeys supported */
+}
+#endif /* CONFIG_POST */
+
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+ if (miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x1f, 0x0001) == 0) {
+ miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11, 0x0010);
+ miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11, 0x0df0);
+ miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x10, 0x0e10);
+ miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x1f, 0x0000);
+ }
+
+ if (miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x1f, 0x0001) == 0) {
+ miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x11, 0x0010);
+ miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x11, 0x0df0);
+ miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x10, 0x0e10);
+ miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x1f, 0x0000);
+ }
+}
+#endif
+
+#if defined(CFG_EEPROM_WREN)
+/* Input: <dev_addr> I2C address of EEPROM device to enable.
+ * <state> -1: deliver current state
+ * 0: disable write
+ * 1: enable write
+ * Returns: -1: wrong device address
+ * 0: dis-/en- able done
+ * 0/1: current state if <state> was -1.
+ */
+int eeprom_write_enable(unsigned dev_addr, int state)
+{
+ if ((CFG_I2C_EEPROM_ADDR != dev_addr) && (CFG_I2C_BOOT_EEPROM_ADDR != dev_addr)) {
+ return -1;
+ } else {
+ switch (state) {
+ case 1:
+ /* Enable write access, clear bit GPIO_SINT2. */
+ out32(GPIO0_OR, in32(GPIO0_OR) & ~GPIO0_EP_EEP);
+ state = 0;
+ break;
+ case 0:
+ /* Disable write access, set bit GPIO_SINT2. */
+ out32(GPIO0_OR, in32(GPIO0_OR) | GPIO0_EP_EEP);
+ state = 0;
+ break;
+ default:
+ /* Read current status back. */
+ state = (0 == (in32(GPIO0_OR) & GPIO0_EP_EEP));
+ break;
+ }
+ }
+ return state;
+}
+#endif /* #if defined(CFG_EEPROM_WREN) */
+
+
+#define CFG_BOOT_EEPROM_PAGE_WRITE_BITS 3
+int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
+{
+ unsigned end = offset + cnt;
+ unsigned blk_off;
+ int rcode = 0;
+
+#if defined(CFG_EEPROM_WREN)
+ eeprom_write_enable(dev_addr, 1);
+#endif
+ /* Write data until done or would cross a write page boundary.
+ * We must write the address again when changing pages
+ * because the address counter only increments within a page.
+ */
+
+ while (offset < end) {
+ unsigned alen, len;
+ unsigned maxlen;
+ uchar addr[2];
+
+ blk_off = offset & 0xFF; /* block offset */
+
+ addr[0] = offset >> 8; /* block number */
+ addr[1] = blk_off; /* block offset */
+ alen = 2;
+ addr[0] |= dev_addr; /* insert device address */
+
+ len = end - offset;
+
+#define BOOT_EEPROM_PAGE_SIZE (1 << CFG_BOOT_EEPROM_PAGE_WRITE_BITS)
+#define BOOT_EEPROM_PAGE_OFFSET(x) ((x) & (BOOT_EEPROM_PAGE_SIZE - 1))
+
+ maxlen = BOOT_EEPROM_PAGE_SIZE - BOOT_EEPROM_PAGE_OFFSET(blk_off);
+ if (maxlen > I2C_RXTX_LEN)
+ maxlen = I2C_RXTX_LEN;
+
+ if (len > maxlen)
+ len = maxlen;
+
+ if (i2c_write (addr[0], offset, alen-1, buffer, len) != 0)
+ rcode = 1;
+
+ buffer += len;
+ offset += len;
+
+#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
+ udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#endif
+ }
+#if defined(CFG_EEPROM_WREN)
+ eeprom_write_enable(dev_addr, 0);
+#endif
+ return rcode;
+}
+
+
+int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
+{
+ unsigned end = offset + cnt;
+ unsigned blk_off;
+ int rcode = 0;
+
+ /* Read data until done or would cross a page boundary.
+ * We must write the address again when changing pages
+ * because the next page may be in a different device.
+ */
+ while (offset < end) {
+ unsigned alen, len;
+ unsigned maxlen;
+ uchar addr[2];
+
+ blk_off = offset & 0xFF; /* block offset */
+
+ addr[0] = offset >> 8; /* block number */
+ addr[1] = blk_off; /* block offset */
+ alen = 2;
+
+ addr[0] |= dev_addr; /* insert device address */
+
+ len = end - offset;
+
+ maxlen = 0x100 - blk_off;
+ if (maxlen > I2C_RXTX_LEN)
+ maxlen = I2C_RXTX_LEN;
+ if (len > maxlen)
+ len = maxlen;
+
+ if (i2c_read (addr[0], offset, alen-1, buffer, len) != 0)
+ rcode = 1;
+ buffer += len;
+ offset += len;
+ }
+
+ return rcode;
+}
+
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_BOARD_INIT)
+int usb_board_init(void)
+{
+ char *act = getenv("usbact");
+ int i;
+
+ if ((act == NULL || strcmp(act, "hostdev") == 0) &&
+ !(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT))
+ /* enable power on USB socket */
+ out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_USB_PWR_N);
+
+ for (i=0; i<1000; i++)
+ udelay(1000);
+
+ return 0;
+}
+
+int usb_board_stop(void)
+{
+ /* disable power on USB socket */
+ out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_USB_PWR_N);
+ return 0;
+}
+
+int usb_board_init_fail(void)
+{
+ usb_board_stop();
+ return 0;
+}
+#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_BOARD_INIT) */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ u32 val[4];
+ int rc;
+
+ ft_cpu_setup(blob, bd);
+
+ /* Fixup NOR mapping */
+ val[0] = 0; /* chip select number */
+ val[1] = 0; /* always 0 */
+ val[2] = gd->bd->bi_flashstart;
+ val[3] = gd->bd->bi_flashsize;
+ rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+ val, sizeof(val), 1);
+ if (rc)
+ printf("Unable to update property NOR mapping, err=%s\n",
+ fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */