1 files changed, 317 insertions, 0 deletions
diff --git a/board/bf527-ezkit/video.c b/board/bf527-ezkit/video.c
new file mode 100644
index 0000000000..2df6717308
--- /dev/null
+++ b/board/bf527-ezkit/video.c
@@ -0,0 +1,317 @@
+/*
+ * video.c - run splash screen on lcd
+ *
+ * Copyright (c) 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <stdarg.h>
+#include <common.h>
+#include <config.h>
+#include <malloc.h>
+#include <asm/blackfin.h>
+#include <asm/mach-common/bits/dma.h>
+#include <i2c.h>
+#include <linux/types.h>
+#include <devices.h>
+
+int gunzip(void *, int, unsigned char *, unsigned long *);
+
+#define DMA_SIZE16	2
+
+#include <asm/mach-common/bits/ppi.h>
+#include <asm/mach-common/bits/timer.h>
+
+#include <asm/bfin_logo_230x230.h>
+
+#define LCD_X_RES		320	/* Horizontal Resolution */
+#define LCD_Y_RES		240	/* Vertical Resolution */
+#define LCD_BPP			24	/* Bit Per Pixel */
+#define LCD_PIXEL_SIZE		(LCD_BPP / 8)
+
+#define	DMA_BUS_SIZE		16
+#define	LCD_CLK         	(12*1000*1000)	/* 12MHz */
+
+#define CLOCKS_PER_PIX		3
+
+/* HS and VS timing parameters (all in number of PPI clk ticks) */
+#define H_ACTPIX	(LCD_X_RES * CLOCKS_PER_PIX)	/* active horizontal pixel */
+#define H_PERIOD	(408 * CLOCKS_PER_PIX)		/* HS period */
+#define H_PULSE		90				/* HS pulse width */
+#define H_START		204				/* first valid pixel */
+
+#define U_LINE		1				/* Blanking Lines */
+
+#define	V_LINES		(LCD_Y_RES + U_LINE)		/* total vertical lines */
+#define V_PULSE		(3 * H_PERIOD)			/* VS pulse width (1-5 H_PERIODs) */
+#define V_PERIOD	(H_PERIOD * V_LINES)		/* VS period */
+
+#define ACTIVE_VIDEO_MEM_OFFSET	(U_LINE * H_ACTPIX)
+
+#define PPI_TX_MODE		0x2
+#define PPI_XFER_TYPE_11	0xC
+#define PPI_PORT_CFG_01		0x10
+#define PPI_PACK_EN		0x80
+#define PPI_POLS_1		0x8000
+
+/* enable and disable PPI functions */
+void EnablePPI(void)
+{
+	*pPPI_CONTROL |= PORT_EN;
+}
+
+void DisablePPI(void)
+{
+	*pPPI_CONTROL &= ~PORT_EN;
+}
+
+void Init_Ports(void)
+{
+	*pPORTF_MUX &= ~PORT_x_MUX_0_MASK;
+	*pPORTF_MUX |= PORT_x_MUX_0_FUNC_1;
+	*pPORTF_FER |= PF0 | PF1 | PF2 | PF3 | PF4 | PF5 | PF6 | PF7;
+
+	*pPORTG_MUX &= ~PORT_x_MUX_1_MASK;
+	*pPORTG_MUX |= PORT_x_MUX_1_FUNC_1;
+	*pPORTG_FER |= PG5;
+}
+
+void Init_PPI(void)
+{
+
+	*pPPI_DELAY = H_START;
+	*pPPI_COUNT = (H_ACTPIX-1);
+	*pPPI_FRAME = 0;
+
+	/* PPI control, to be replaced with definitions */
+	*pPPI_CONTROL = PPI_TX_MODE		|	/* output mode , PORT_DIR */
+			PPI_XFER_TYPE_11	|	/* sync mode XFR_TYPE */
+			PPI_PORT_CFG_01		|	/* two frame sync PORT_CFG */
+			PPI_PACK_EN		|	/* packing enabled PACK_EN */
+			PPI_POLS_1;			/* faling edge syncs POLS */
+}
+
+void Init_DMA(void *dst)
+{
+	*pDMA0_START_ADDR = dst;
+
+	/* X count */
+	*pDMA0_X_COUNT = H_ACTPIX / 2;
+	*pDMA0_X_MODIFY = DMA_BUS_SIZE / 8;
+
+	/* Y count */
+	*pDMA0_Y_COUNT = V_LINES;
+	*pDMA0_Y_MODIFY = DMA_BUS_SIZE / 8;
+
+	/* DMA Config */
+	*pDMA0_CONFIG =
+		WDSIZE_16	|	/* 16 bit DMA */
+		DMA2D 		|	/* 2D DMA */
+		FLOW_AUTO;		/* autobuffer mode */
+}
+
+
+void EnableDMA(void)
+{
+	*pDMA0_CONFIG |= DMAEN;
+}
+
+void DisableDMA(void)
+{
+	*pDMA0_CONFIG &= ~DMAEN;
+}
+
+
+/* Init TIMER0 as Frame Sync 1 generator */
+void InitTIMER0(void)
+{
+	*pTIMER_DISABLE |= TIMDIS0;			/* disable Timer */
+	SSYNC();
+	*pTIMER_STATUS  |= TIMIL0 | TOVF_ERR0 | TRUN0;	/* clear status */
+	SSYNC();
+
+	*pTIMER0_PERIOD  = H_PERIOD;
+	SSYNC();
+	*pTIMER0_WIDTH   = H_PULSE;
+	SSYNC();
+
+	*pTIMER0_CONFIG  = PWM_OUT |
+				PERIOD_CNT   |
+				TIN_SEL      |
+				CLK_SEL      |
+				EMU_RUN;
+	SSYNC();
+}
+
+void EnableTIMER0(void)
+{
+	*pTIMER_ENABLE  |= TIMEN0;
+	SSYNC();
+}
+
+void DisableTIMER0(void)
+{
+	*pTIMER_DISABLE  |= TIMDIS0;
+	SSYNC();
+}
+
+
+void InitTIMER1(void)
+{
+	*pTIMER_DISABLE |= TIMDIS1;			/* disable Timer */
+	SSYNC();
+	*pTIMER_STATUS  |= TIMIL1 | TOVF_ERR1 | TRUN1;	/* clear status */
+	SSYNC();
+
+
+	*pTIMER1_PERIOD  = V_PERIOD;
+	SSYNC();
+	*pTIMER1_WIDTH   = V_PULSE;
+	SSYNC();
+
+	*pTIMER1_CONFIG  = PWM_OUT |
+				PERIOD_CNT   |
+				TIN_SEL      |
+				CLK_SEL      |
+				EMU_RUN;
+	SSYNC();
+}
+
+void EnableTIMER1(void)
+{
+	*pTIMER_ENABLE  |= TIMEN1;
+	SSYNC();
+}
+
+void DisableTIMER1(void)
+{
+	*pTIMER_DISABLE  |= TIMDIS1;
+	SSYNC();
+}
+
+int video_init(void *dst)
+{
+
+	Init_Ports();
+	Init_DMA(dst);
+	EnableDMA();
+	InitTIMER0();
+	InitTIMER1();
+	Init_PPI();
+	EnablePPI();
+
+	/* Frame sync 2 (VS) needs to start at least one PPI clk earlier */
+	EnableTIMER1();
+	/* Add Some Delay ... */
+	SSYNC();
+	SSYNC();
+	SSYNC();
+	SSYNC();
+
+	/* now start frame sync 1 */
+	EnableTIMER0();
+
+	return 0;
+}
+
+static void dma_bitblit(void *dst, fastimage_t *logo, int x, int y)
+{
+	if (dcache_status())
+		blackfin_dcache_flush_range(logo->data, logo->data + logo->size);
+
+	bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
+
+	/* Setup destination start address */
+	bfin_write_MDMA_D0_START_ADDR(dst + ((x & -2) * LCD_PIXEL_SIZE)
+					+ (y * LCD_X_RES * LCD_PIXEL_SIZE));
+	/* Setup destination xcount */
+	bfin_write_MDMA_D0_X_COUNT(logo->width * LCD_PIXEL_SIZE / DMA_SIZE16);
+	/* Setup destination xmodify */
+	bfin_write_MDMA_D0_X_MODIFY(DMA_SIZE16);
+
+	/* Setup destination ycount */
+	bfin_write_MDMA_D0_Y_COUNT(logo->height);
+	/* Setup destination ymodify */
+	bfin_write_MDMA_D0_Y_MODIFY((LCD_X_RES - logo->width) * LCD_PIXEL_SIZE + DMA_SIZE16);
+
+
+	/* Setup Source start address */
+	bfin_write_MDMA_S0_START_ADDR(logo->data);
+	/* Setup Source xcount */
+	bfin_write_MDMA_S0_X_COUNT(logo->width * LCD_PIXEL_SIZE / DMA_SIZE16);
+	/* Setup Source xmodify */
+	bfin_write_MDMA_S0_X_MODIFY(DMA_SIZE16);
+
+	/* Setup Source ycount */
+	bfin_write_MDMA_S0_Y_COUNT(logo->height);
+	/* Setup Source ymodify */
+	bfin_write_MDMA_S0_Y_MODIFY(DMA_SIZE16);
+
+
+	/* Enable source DMA */
+	bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16 | DMA2D);
+	SSYNC();
+	bfin_write_MDMA_D0_CONFIG(WNR | DMAEN  | WDSIZE_16 | DMA2D);
+
+	while (bfin_read_MDMA_D0_IRQ_STATUS() & DMA_RUN);
+
+	bfin_write_MDMA_S0_IRQ_STATUS(bfin_read_MDMA_S0_IRQ_STATUS() | DMA_DONE | DMA_ERR);
+	bfin_write_MDMA_D0_IRQ_STATUS(bfin_read_MDMA_D0_IRQ_STATUS() | DMA_DONE | DMA_ERR);
+
+}
+
+void video_putc(const char c)
+{
+}
+
+void video_puts(const char *s)
+{
+}
+
+int drv_video_init(void)
+{
+	int error, devices = 1;
+	device_t videodev;
+
+	u8 *dst;
+	u32 fbmem_size = LCD_X_RES * LCD_Y_RES * LCD_PIXEL_SIZE + ACTIVE_VIDEO_MEM_OFFSET;
+
+	dst = malloc(fbmem_size);
+
+	if (dst == NULL) {
+		printf("Failed to alloc FB memory\n");
+		return -1;
+	}
+
+#ifdef EASYLOGO_ENABLE_GZIP
+	unsigned char *data = EASYLOGO_DECOMP_BUFFER;
+	unsigned long src_len = EASYLOGO_ENABLE_GZIP;
+	if (gunzip(data, bfin_logo.size, bfin_logo.data, &src_len)) {
+		puts("Failed to decompress logo\n");
+		free(dst);
+		return -1;
+	}
+	bfin_logo.data = data;
+#endif
+
+	memset(dst + ACTIVE_VIDEO_MEM_OFFSET, bfin_logo.data[0], fbmem_size - ACTIVE_VIDEO_MEM_OFFSET);
+
+	dma_bitblit(dst + ACTIVE_VIDEO_MEM_OFFSET, &bfin_logo,
+			(LCD_X_RES - bfin_logo.width) / 2,
+			(LCD_Y_RES - bfin_logo.height) / 2);
+
+	video_init(dst);		/* Video initialization */
+
+	memset(&videodev, 0, sizeof(videodev));
+
+	strcpy(videodev.name, "video");
+	videodev.ext = DEV_EXT_VIDEO;	/* Video extensions */
+	videodev.flags = DEV_FLAGS_SYSTEM;	/* No Output */
+	videodev.putc = video_putc;	/* 'putc' function */
+	videodev.puts = video_puts;	/* 'puts' function */
+
+	error = device_register(&videodev);
+
+	return (error == 0) ? devices : error;
+}