summaryrefslogtreecommitdiff
path: root/arch/arm/mach-tegra/tegra30/cpu.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-tegra/tegra30/cpu.c')
-rw-r--r--arch/arm/mach-tegra/tegra30/cpu.c183
1 files changed, 183 insertions, 0 deletions
diff --git a/arch/arm/mach-tegra/tegra30/cpu.c b/arch/arm/mach-tegra/tegra30/cpu.c
new file mode 100644
index 0000000000..c76e74c65f
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra30/cpu.c
@@ -0,0 +1,183 @@
+/*
+ * Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/flow.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/pmc.h>
+#include <asm/arch-tegra/tegra_i2c.h>
+#include "../cpu.h"
+
+/* Tegra30-specific CPU init code */
+void tegra_i2c_ll_write_addr(uint addr, uint config)
+{
+ struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE;
+
+ writel(addr, &reg->cmd_addr0);
+ writel(config, &reg->cnfg);
+}
+
+void tegra_i2c_ll_write_data(uint data, uint config)
+{
+ struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE;
+
+ writel(data, &reg->cmd_data1);
+ writel(config, &reg->cnfg);
+}
+
+#define TPS62366A_I2C_ADDR 0xC0
+#define TPS62366A_SET1_REG 0x01
+#define TPS62366A_SET1_DATA (0x4600 | TPS62366A_SET1_REG)
+
+#define TPS62361B_I2C_ADDR 0xC0
+#define TPS62361B_SET3_REG 0x03
+#define TPS62361B_SET3_DATA (0x4600 | TPS62361B_SET3_REG)
+
+#define TPS65911_I2C_ADDR 0x5A
+#define TPS65911_VDDCTRL_OP_REG 0x28
+#define TPS65911_VDDCTRL_SR_REG 0x27
+#define TPS65911_VDDCTRL_OP_DATA (0x2400 | TPS65911_VDDCTRL_OP_REG)
+#define TPS65911_VDDCTRL_SR_DATA (0x0100 | TPS65911_VDDCTRL_SR_REG)
+#define I2C_SEND_2_BYTES 0x0A02
+
+static void enable_cpu_power_rail(void)
+{
+ struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+ u32 reg;
+
+ debug("enable_cpu_power_rail entry\n");
+ reg = readl(&pmc->pmc_cntrl);
+ reg |= CPUPWRREQ_OE;
+ writel(reg, &pmc->pmc_cntrl);
+
+ /* Set VDD_CORE to 1.200V. */
+#ifdef CONFIG_TEGRA_VDD_CORE_TPS62366A_SET1
+ tegra_i2c_ll_write_addr(TPS62366A_I2C_ADDR, 2);
+ tegra_i2c_ll_write_data(TPS62366A_SET1_DATA, I2C_SEND_2_BYTES);
+#endif
+#ifdef CONFIG_TEGRA_VDD_CORE_TPS62361B_SET3
+ tegra_i2c_ll_write_addr(TPS62361B_I2C_ADDR, 2);
+ tegra_i2c_ll_write_data(TPS62361B_SET3_DATA, I2C_SEND_2_BYTES);
+#endif
+ udelay(1000);
+
+ /*
+ * Bring up CPU VDD via the TPS65911x PMIC on the DVC I2C bus.
+ * First set VDD to 1.0125V, then enable the VDD regulator.
+ */
+ tegra_i2c_ll_write_addr(TPS65911_I2C_ADDR, 2);
+ tegra_i2c_ll_write_data(TPS65911_VDDCTRL_OP_DATA, I2C_SEND_2_BYTES);
+ udelay(1000);
+ tegra_i2c_ll_write_data(TPS65911_VDDCTRL_SR_DATA, I2C_SEND_2_BYTES);
+ udelay(10 * 1000);
+}
+
+/**
+ * The T30 requires some special clock initialization, including setting up
+ * the dvc i2c, turning on mselect and selecting the G CPU cluster
+ */
+void t30_init_clocks(void)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
+ u32 val;
+
+ debug("t30_init_clocks entry\n");
+ /* Set active CPU cluster to G */
+ clrbits_le32(flow->cluster_control, 1 << 0);
+
+ writel(SUPER_SCLK_ENB_MASK, &clkrst->crc_super_sclk_div);
+
+ val = (0 << CLK_SYS_RATE_HCLK_DISABLE_SHIFT) |
+ (1 << CLK_SYS_RATE_AHB_RATE_SHIFT) |
+ (0 << CLK_SYS_RATE_PCLK_DISABLE_SHIFT) |
+ (0 << CLK_SYS_RATE_APB_RATE_SHIFT);
+ writel(val, &clkrst->crc_clk_sys_rate);
+
+ /* Put i2c, mselect in reset and enable clocks */
+ reset_set_enable(PERIPH_ID_DVC_I2C, 1);
+ clock_set_enable(PERIPH_ID_DVC_I2C, 1);
+ reset_set_enable(PERIPH_ID_MSELECT, 1);
+ clock_set_enable(PERIPH_ID_MSELECT, 1);
+
+ /* Switch MSELECT clock to PLLP (00) and use a divisor of 2 */
+ clock_ll_set_source_divisor(PERIPH_ID_MSELECT, 0, 2);
+
+ /*
+ * Our high-level clock routines are not available prior to
+ * relocation. We use the low-level functions which require a
+ * hard-coded divisor. Use CLK_M with divide by (n + 1 = 17)
+ */
+ clock_ll_set_source_divisor(PERIPH_ID_DVC_I2C, 3, 16);
+
+ /*
+ * Give clocks time to stabilize, then take i2c and mselect out of
+ * reset
+ */
+ udelay(1000);
+ reset_set_enable(PERIPH_ID_DVC_I2C, 0);
+ reset_set_enable(PERIPH_ID_MSELECT, 0);
+}
+
+static void set_cpu_running(int run)
+{
+ struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
+
+ debug("set_cpu_running entry, run = %d\n", run);
+ writel(run ? FLOW_MODE_NONE : FLOW_MODE_STOP, &flow->halt_cpu_events);
+}
+
+void start_cpu(u32 reset_vector)
+{
+ debug("start_cpu entry, reset_vector = %x\n", reset_vector);
+ t30_init_clocks();
+
+ /* Enable VDD_CPU */
+ enable_cpu_power_rail();
+
+ set_cpu_running(0);
+
+ /* Hold the CPUs in reset */
+ reset_A9_cpu(1);
+
+ /* Disable the CPU clock */
+ enable_cpu_clock(0);
+
+ /* Enable CoreSight */
+ clock_enable_coresight(1);
+
+ /*
+ * Set the entry point for CPU execution from reset,
+ * if it's a non-zero value.
+ */
+ if (reset_vector)
+ writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
+
+ /* Enable the CPU clock */
+ enable_cpu_clock(1);
+
+ /* If the CPU doesn't already have power, power it up */
+ powerup_cpu();
+
+ /* Take the CPU out of reset */
+ reset_A9_cpu(0);
+
+ set_cpu_running(1);
+}