diff options
Diffstat (limited to 'README')
| -rw-r--r-- | README | 80 |
1 files changed, 69 insertions, 11 deletions
@@ -383,6 +383,31 @@ The following options need to be configured: symbol should be set to the TLB1 entry to be used for this purpose. + CONFIG_SYS_FSL_ERRATUM_A004510 + + Enables a workaround for erratum A004510. If set, + then CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV and + CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY must be set. + + CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV + CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 (optional) + + Defines one or two SoC revisions (low 8 bits of SVR) + for which the A004510 workaround should be applied. + + The rest of SVR is either not relevant to the decision + of whether the erratum is present (e.g. p2040 versus + p2041) or is implied by the build target, which controls + whether CONFIG_SYS_FSL_ERRATUM_A004510 is set. + + See Freescale App Note 4493 for more information about + this erratum. + + CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY + + This is the value to write into CCSR offset 0x18600 + according to the A004510 workaround. + - Generic CPU options: CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN @@ -907,7 +932,8 @@ The following options need to be configured: If this variable is defined, an environment variable named "ver" is created by U-Boot showing the U-Boot version as printed by the "version" command. - This variable is readonly. + Any change to this variable will be reverted at the + next reset. - Real-Time Clock: @@ -950,13 +976,20 @@ The following options need to be configured: commands like bootm or iminfo. This option is automatically enabled when you select CONFIG_CMD_DATE . -- Partition Support: - CONFIG_MAC_PARTITION and/or CONFIG_DOS_PARTITION - and/or CONFIG_ISO_PARTITION and/or CONFIG_EFI_PARTITION +- Partition Labels (disklabels) Supported: + Zero or more of the following: + CONFIG_MAC_PARTITION Apple's MacOS partition table. + CONFIG_DOS_PARTITION MS Dos partition table, traditional on the + Intel architecture, USB sticks, etc. + CONFIG_ISO_PARTITION ISO partition table, used on CDROM etc. + CONFIG_EFI_PARTITION GPT partition table, common when EFI is the + bootloader. Note 2TB partition limit; see + disk/part_efi.c + CONFIG_MTD_PARTITIONS Memory Technology Device partition table. If IDE or SCSI support is enabled (CONFIG_CMD_IDE or CONFIG_CMD_SCSI) you must configure support for at - least one partition type as well. + least one non-MTD partition type as well. - IDE Reset method: CONFIG_IDE_RESET_ROUTINE - this is defined in several @@ -1450,6 +1483,12 @@ The following options need to be configured: can be displayed via the splashscreen support or the bmp command. +- Do compresssing for memory range: + CONFIG_CMD_ZIP + + If this option is set, it would use zlib deflate method + to compress the specified memory at its best effort. + - Compression support: CONFIG_BZIP2 @@ -2564,6 +2603,15 @@ FIT uImage format: CONFIG_SYS_SPL_MALLOC_SIZE The size of the malloc pool used in SPL. + CONFIG_SPL_FRAMEWORK + Enable the SPL framework under common/. This framework + supports MMC, NAND and YMODEM loading of U-Boot and NAND + NAND loading of the Linux Kernel. + + CONFIG_SPL_DISPLAY_PRINT + For ARM, enable an optional function to print more information + about the running system. + CONFIG_SPL_LIBCOMMON_SUPPORT Support for common/libcommon.o in SPL binary @@ -2627,6 +2675,9 @@ FIT uImage format: CONFIG_SPL_SPI_SUPPORT Support for drivers/spi/libspi.o in SPL binary + CONFIG_SPL_RAM_DEVICE + Support for running image already present in ram, in SPL binary + CONFIG_SPL_LIBGENERIC_SUPPORT Support for lib/libgeneric.o in SPL binary @@ -3092,12 +3143,12 @@ to save the current settings. These two #defines specify the address and size of the environment area within the remote memory space. The local device can get the environment from remote memory - space by SRIO or other links. + space by SRIO or PCIE links. BE CAREFUL! For some special cases, the local device can not use "saveenv" command. For example, the local device will get the -environment stored in a remote NOR flash by SRIO link, but it can -not erase, write this NOR flash by SRIO interface. +environment stored in a remote NOR flash by SRIO or PCIE link, +but it can not erase, write this NOR flash by SRIO or PCIE interface. - CONFIG_ENV_IS_IN_NAND: @@ -3377,6 +3428,13 @@ Low Level (hardware related) configuration options: Disable PCI-Express on systems where it is supported but not required. +- CONFIG_PCI_ENUM_ONLY + Only scan through and get the devices on the busses. + Don't do any setup work, presumably because someone or + something has already done it, and we don't need to do it + a second time. Useful for platforms that are pre-booted + by coreboot or similar. + - CONFIG_SYS_SRIO: Chip has SRIO or not @@ -3538,9 +3596,9 @@ within that device. - CONFIG_SYS_QE_FMAN_FW_IN_REMOTE Specifies that QE/FMAN firmware is located in the remote (master) memory space. CONFIG_SYS_FMAN_FW_ADDR is a virtual address which - can be mapped from slave TLB->slave LAW->slave SRIO outbound window - ->master inbound window->master LAW->the ucode address in master's - NOR flash. + can be mapped from slave TLB->slave LAW->slave SRIO or PCIE outbound + window->master inbound window->master LAW->the ucode address in + master's memory space. Building the Software: ====================== |