diff options
Diffstat (limited to 'CHANGELOG')
| -rw-r--r-- | CHANGELOG | 464 |
1 files changed, 464 insertions, 0 deletions
@@ -1,3 +1,453 @@ +commit 885ec89b648a899a2f32393fd3ffd9f7234c4402 +Author: Wolfgang Denk <wd@denx.de> +Date: Sat May 5 18:05:02 2007 +0200 + + Add STX GP3 SSA board to MAKEALL script; update CHANGELOG. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 5499645b3fe17a548af9dfc479ca6e2455f179a2 +Author: Wolfgang Denk <wd@denx.de> +Date: Sat May 5 17:15:50 2007 +0200 + + Make "file" command happy with some config.mk files; update CHANGELOG + +commit e3b8c78bc2489c27ae020986ef0eaca684866cef +Author: Jeffrey Mann <mannj@embeddedplanet.com> +Date: Sat May 5 08:32:14 2007 +0200 + + ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz + + The AMCC Secquoia board has been changed in a new revision from using a + 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD + indicates the difference. This patch reads that bit and uses the correct + clock speed for the board. This code is backward compatable will all + prior boards. All prior boards will be read as 33.000. + + Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit f544ff6656fca263ed1ebe39899b6d95da67c8b8 +Author: Stefan Roese <sr@denx.de> +Date: Sat May 5 08:29:01 2007 +0200 + + ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting + + Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big + for the 4k NAND boot image so define bus_frequency to 133MHz here + which is save for the refresh counter setup. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit a79886590593ba1d667c840caa4940c61639f18f +Author: Thomas Knobloch <knobloch@siemens.com> +Date: Sat May 5 07:04:42 2007 +0200 + + NAND: Wrong calculation of page number in nand_block_bad() + + In case that there is no memory based bad block table available the + function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call + nand_block_bad() directly. When parameter 'getchip' is set to zero, + nand_block_bad() will not right shift the offset to calculate the + correct page number. + + Signed-off-by: Thomas Knobloch <knobloch@siemens.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6 +Author: Wolfgang Denk <wd@denx.de> +Date: Fri May 4 10:02:33 2007 +0200 + + Fix initrd length corruption in bootm command. + + When using FDT Images, the length of an inital ramdisk was + overwritten (bug introduced by commit 87a449c8, 22 Aug 2006). + + Patches by Timur Tabi & Johns Daniel. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a +Author: Wolfgang Denk <wd@denx.de> +Date: Thu May 3 16:34:41 2007 +0200 + + Update board configuration for STX GP3SSA board: + + Enable hush shell, environment in flash rather in EEPROM, + more user-friendly default environment, etc. + The simple EEPROM environment can be selected easily in the board + config file. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 2c6fb199dc5756fc72f49d1f4de105e089049d65 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Apr 24 14:37:49 2007 +0200 + + Cleanup STX GP3SSA code; fix build and compile problems. + +commit 35171dc04e028ecacc23ad916a66295472555dbf +Author: Dan Malek <dan@embeddedalley.com> +Date: Fri Jan 5 09:15:34 2007 +0100 + + Add support for STX GP3SSA (stxssa) Board + + Signed-off-by Dan Malek, <dan@embeddedalley.com> + +commit ffa621a0d12a1ccd81c936c567f8917a213787a8 +Author: Andy Fleming <afleming@freescale.com> +Date: Sat Feb 24 01:08:13 2007 -0600 + + Cleaned up some 85xx PCI bugs + + * Cleaned up the CDS PCI Config Tables and added NULL entries to + the end + * Fixed PCIe LAWBAR assignemt to use the cpu-relative address + * Fixed 85xx PCI code to assign powar region sizes based on the + config values (rather than hard-coding them) + * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 6743105988fc44d5b0d30388c790607835aae7a6 +Author: Andy Fleming <afleming@freescale.com> +Date: Mon Apr 23 02:54:25 2007 -0500 + + Add support for the 8568 MDS board + + This included some changes to common files: + * Add 8568 processor SVR to various places + * Add support for setting the qe bus-frequency value in the dts + * Add the 8568MDS target to the Makefile + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit af1c2b84bf27c8565baddc82d1abb93700d10e2e +Author: David Updegraff <dave@cray.com> +Date: Fri Apr 20 14:34:48 2007 -0500 + + Add support for treating unknown PHYs as generic PHYs. + + When bringing up u-boot on new boards, PHY support sometimes gets + neglected. Most PHYs don't really need any special support, + though. By adding a generic entry that always matches if nothing + else does, we can provide support for "unsupported" PHYs for the + tsec. + + The generic PHY driver supports most PHYs, including gigabit. + + Signed-off-by: David Updegraff <dave@cray.com> + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit a75af9bfd8fff0499efdbb90601cec5a2afef117 +Author: James Yang <James.Yang@freescale.com> +Date: Wed Feb 7 15:28:04 2007 -0600 + + Conditionalize 8641 Rev1.0 MCM workarounds + + Signed-off-by: James Yang <James.Yang@freescale.com> + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit c1ab82669d9525998c34e802a12cad662723f22a +Author: James Yang <James.Yang@freescale.com> +Date: Fri Mar 16 13:02:53 2007 -0500 + + Rewrote picos_to_clk() to avoid rounding errors. + Clarified that conversion is to DRAM clocks rather than platform clocks. + Made function static to spd_sdram.c. + + Signed-off-by: James Yang <James.Yang@freescale.com> + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 8b39501d28754e72726ce7fb02310e56dbdf116a +Author: Stefan Roese <sr@denx.de> +Date: Sun Apr 29 14:13:01 2007 +0200 + + ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Tue Apr 24 14:03:45 2007 +0200 + + ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content. + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d +Author: Andy Fleming <afleming@freescale.com> +Date: Mon Apr 23 02:37:47 2007 -0500 + + Reworked 85xx speed detection code + + Changed the code to read the registers and calculate the clock + rates, rather than using a "switch" statement. + + Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com> + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 81f481ca708ed6a56bf9c410e3191dbad581c565 +Author: Andy Fleming <afleming@freescale.com> +Date: Mon Apr 23 02:24:28 2007 -0500 + + Enable 8544 support + + * Add support to the Makefile + * Add 8544 configuration support to the tsec driver + * Add 8544 SVR numbers to processor.h + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe +Author: Andy Fleming <afleming@freescale.com> +Date: Fri Feb 23 17:12:25 2007 -0600 + + Support 1G size on 8548 + + e500v2 and newer cores support 1G page sizes. + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46 +Author: Andy Fleming <afleming@freescale.com> +Date: Fri Feb 23 17:11:16 2007 -0600 + + Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG + + The other pagesz constants use one letter to specify order of + magnitude. Also change the one reference to it in mpc8548cds/init.S + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 1f9a318cea14272edd10d63739e2d326c90f430e +Author: Andy Fleming <afleming@freescale.com> +Date: Fri Feb 23 16:28:46 2007 -0600 + + Only set ddrioovcr for 8548 rev1. + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2 +Author: Andy Fleming <afleming@freescale.com> +Date: Sat Feb 24 01:16:45 2007 -0600 + + Tweak DDR ECC error counter + + Enable single-bit error counter when memory was cleared by ddr controller. + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b +Author: Timur Tabi <timur@freescale.com> +Date: Mon Feb 12 13:34:55 2007 -0600 + + 85xx: write MAC address to mac-address and local-mac-address + + Some device trees have a mac-address property, some have local-mac-address, + and some have both. To support all of these device trees, ftp_cpu_setup() + should write the MAC address to mac-address and local-mac-address, if they + exist. + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4 +Author: Andy Fleming <afleming@freescale.com> +Date: Mon Apr 23 01:44:44 2007 -0500 + + Some 85xx cpu cleanups + + * Cleaned up the TSR[WIS] clearing + * Cleaned up DMA initialization + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + Signed-off-by: Jon Loeliger <jdl@freescale.com> + Acked-by: Andy Fleming <afleming@freescale.com> + +commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb +Author: Andy Fleming <afleming@freescale.com> +Date: Mon Apr 23 01:32:22 2007 -0500 + + Add cpu support for the 8544 + + Recognize new SVR values, and add a few register definitions + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + Signed-off-by: Jon Loeliger <jdl@freescale.com> + Acked-by: Andy Fleming <afleming@freescale.com> + +commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Apr 11 16:51:02 2007 -0500 + + Add MPC8544DS basic port board files. + + Add board port under new board/freescale directory + structure and reuse existing PIXIS FPGA support there. + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Apr 11 16:50:57 2007 -0500 + + Add MPC8544DS main configuration file. + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6 +Author: Sergei Shtylyov <sshtylyov@ru.mvista.com> +Date: Wed Dec 27 22:07:15 2006 +0300 + + Fix PCI I/O space mapping on Freescale MPC85x0ADS + + The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit + 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's + describing the local address window used for the PCI I/O space accesses -- fix + this and carry over the necessary changes into the MPC8560ADS code since the + PCI I/O space mapping was also broken for this board (by the earlier commit + 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how + the PCI I/O space must be mapped to all the MPC85xx board config. headers. + + Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> + + board/mpc8540ads/init.S | 4 ++-- + board/mpc8560ads/init.S | 4 ++-- + include/configs/MPC8540ADS.h | 5 ++--- + include/configs/MPC8541CDS.h | 2 +- + include/configs/MPC8548CDS.h | 2 +- + include/configs/MPC8560ADS.h | 8 ++++---- + 6 files changed, 12 insertions(+), 13 deletions(-) + +commit 96629cbabdb727d4a5e62542deefc01d498db6dc +Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> +Date: Tue Dec 5 16:42:30 2006 +0800 + + u-boot: Fix e500 v2 core reset bug + + The following patch fixes the e500 v2 core reset bug. + For e500 v2 core, a new reset control register is added to reset the + processor. + + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + +commit 63247a5acd58032e6cf33f525bc3923b467bac88 +Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> +Date: Wed Dec 20 11:01:00 2006 +0800 + + u-boot: v2: Remove the fixed TLB and LAW entrynubmer + + Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW + entry number to control the loop. This can reduce the potential risk + for the 85xx processor increasing its TLB adn LAW entry number. + + Signed-off-by: Swarthout Edward <swarthout@freescale.com> + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + +commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf +Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> +Date: Mon Dec 18 17:01:04 2006 +0800 + + u-boot: Fix the 85xxcds tsec bug + + Fix the 85xxcds tsec bug. + When enable PCI, tsec.o should be added to u-boot.lds to make tsec work. + + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + +commit 7337b237ffc4aaf1b9467024fe472a880d852598 +Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> +Date: Fri Dec 15 14:43:31 2006 +0800 + + u-boot: Fix CPU2 errata on MPC8548CDS board + + This patch apply workaround of CPU2 errata on MPC8548CDS board. + + Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com> + +commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09 +Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com> +Date: Mon Dec 18 16:25:15 2006 +0800 + + u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default + + This patch disables MPC8548CDS 2T_TIMING for DDR by default. + + Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com> + +commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7 +Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> +Date: Thu Dec 14 14:14:55 2006 +0800 + + u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board + + Enable PCI function and add PEX & rapidio memory map on MPC8548CDS + board. + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + +commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522 +Author: Stefan Roese <sr@denx.de> +Date: Mon Apr 23 12:00:22 2007 +0200 + + Remove BOARDLIBS usage completely + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d +Author: Ed Swarthout <Ed.Swarthout@freescale.com> +Date: Wed Feb 28 05:37:29 2007 -0600 + + mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines. + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + +commit 79cb47391eebef85acadb3f6961ef6c55cace6ac +Author: Zhang Wei <wei.zhang@freescale.com> +Date: Fri Jan 19 10:42:37 2007 +0800 + + Enable LAWs for MPC8641 PCI-Ex2. + + Signed-off-by: Zhang Wei <wei.zhang@freescale.com> + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit bd7851ce1e1f140665b520026abf1042968b1102 +Author: Jon Loeliger <jdl@freescale.com> +Date: Fri Apr 20 14:12:26 2007 -0500 + + mpc86xx; Write MAC address to mac-address and local-mac-address + + Some device trees have a mac-address property, some have local-mac-address, + and some have both. To support all of these device trees, ftp_cpu_setup() + should write the MAC address to mac-address and local-mac-address, if they + exist. + + Signed-off-by: Timur Tabi <timur@freescale.com> + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 7dbdf28b8bd855a8530dc3292e4982575a197060 +Author: Jon Loeliger <jdl@freescale.com> +Date: Fri Apr 20 14:11:38 2007 -0500 + + mpc86xx: protect memcpy to bad address if a mac-address is missing from dt + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 14da5f7675bbb427c469e3f45006e027b6e21db9 +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Apr 20 17:43:28 2007 +0200 + + Cleanup compiler warnings, update CHANGELOG + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit 6923565db12af34fd5e02d354ee65a8c78ac460f Author: Detlev Zundel <dzu@denx.de> Date: Fri Apr 20 12:01:47 2007 +0200 @@ -30,6 +480,20 @@ Date: Thu Apr 19 23:14:39 2007 -0400 Also moved the libfdt.a requirement into the main Makefile. That is The U-Boot Way. +commit d21686263574e95cb3e9e9b0496f968b1b897fdb +Author: Stefan Roese <sr@denx.de> +Date: Thu Apr 19 09:53:52 2007 +0200 + + ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai + + Previous versions used full wait states for the chip select #1 which + is connected to the Xilinix SystemACE controller on the AMCC Katmai + evaluation board. This leads to really slow access and therefore low + performance. This patch now sets up the chip select a lot faster + resulting in much better read/write performance of the Linux driver. + + Signed-off-by: Stefan Roese <sr@denx.de> + commit 37837828d89084879bee2f2b8c7c68d4695940df Author: Wolfgang Denk <wd@denx.de> Date: Wed Apr 18 17:49:29 2007 +0200 |