summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--README74
-rw-r--r--arch/arm/lib/board.c7
-rw-r--r--arch/blackfin/lib/board.c7
-rw-r--r--arch/m68k/lib/board.c17
-rw-r--r--arch/nds32/lib/board.c10
-rw-r--r--arch/powerpc/cpu/mpc8xx/video.c4
-rw-r--r--arch/powerpc/lib/board.c12
-rw-r--r--common/board_f.c6
-rw-r--r--common/cmd_date.c9
-rw-r--r--common/cmd_dtt.c9
-rw-r--r--common/cmd_i2c.c121
-rw-r--r--common/env_eeprom.c14
-rw-r--r--common/stdio.c13
-rw-r--r--include/i2c.h9
14 files changed, 249 insertions, 63 deletions
diff --git a/README b/README
index bcfffc3695..2fe3f08f4b 100644
--- a/README
+++ b/README
@@ -1944,9 +1944,77 @@ CBFS (Coreboot Filesystem) support
on those systems that support this (optional)
feature, like the TQM8xxL modules.
-- I2C Support: CONFIG_HARD_I2C | CONFIG_SOFT_I2C
-
- These enable I2C serial bus commands. Defining either of
+- I2C Support: CONFIG_SYS_I2C
+
+ This enable the NEW i2c subsystem, and will allow you to use
+ i2c commands at the u-boot command line (as long as you set
+ CONFIG_CMD_I2C in CONFIG_COMMANDS) and communicate with i2c
+ based realtime clock chips or other i2c devices. See
+ common/cmd_i2c.c for a description of the command line
+ interface.
+
+ ported i2c driver to the new framework:
+
+ additional defines:
+
+ CONFIG_SYS_NUM_I2C_BUSES
+ Hold the number of i2c busses you want to use. If you
+ don't use/have i2c muxes on your i2c bus, this
+ is equal to CONFIG_SYS_NUM_I2C_ADAPTERS, and you can
+ omit this define.
+
+ CONFIG_SYS_I2C_DIRECT_BUS
+ define this, if you don't use i2c muxes on your hardware.
+ if CONFIG_SYS_I2C_MAX_HOPS is not defined or == 0 you can
+ omit this define.
+
+ CONFIG_SYS_I2C_MAX_HOPS
+ define how many muxes are maximal consecutively connected
+ on one i2c bus. If you not use i2c muxes, omit this
+ define.
+
+ CONFIG_SYS_I2C_BUSES
+ hold a list of busses you want to use, only used if
+ CONFIG_SYS_I2C_DIRECT_BUS is not defined, for example
+ a board with CONFIG_SYS_I2C_MAX_HOPS = 1 and
+ CONFIG_SYS_NUM_I2C_BUSES = 9:
+
+ CONFIG_SYS_I2C_BUSES {{0, {I2C_NULL_HOP}}, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 1}}}, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 2}}}, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 3}}}, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 4}}}, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 5}}}, \
+ {1, {I2C_NULL_HOP}}, \
+ {1, {{I2C_MUX_PCA9544, 0x72, 1}}}, \
+ {1, {{I2C_MUX_PCA9544, 0x72, 2}}}, \
+ }
+
+ which defines
+ bus 0 on adapter 0 without a mux
+ bus 1 on adapter 0 without a PCA9547 on address 0x70 port 1
+ bus 2 on adapter 0 without a PCA9547 on address 0x70 port 2
+ bus 3 on adapter 0 without a PCA9547 on address 0x70 port 3
+ bus 4 on adapter 0 without a PCA9547 on address 0x70 port 4
+ bus 5 on adapter 0 without a PCA9547 on address 0x70 port 5
+ bus 6 on adapter 1 without a mux
+ bus 7 on adapter 1 without a PCA9544 on address 0x72 port 1
+ bus 8 on adapter 1 without a PCA9544 on address 0x72 port 2
+
+ If you do not have i2c muxes on your board, omit this define.
+
+- Legacy I2C Support: CONFIG_HARD_I2C | CONFIG_SOFT_I2C
+
+ NOTE: It is intended to move drivers to CONFIG_SYS_I2C which
+ provides the following compelling advantages:
+
+ - more than one i2c adapter is usable
+ - approved multibus support
+ - better i2c mux support
+
+ ** Please consider updating your I2C driver now. **
+
+ These enable legacy I2C serial bus commands. Defining either of
(but not both of) CONFIG_HARD_I2C or CONFIG_SOFT_I2C will
include the appropriate I2C driver for the selected CPU.
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index 09ab4ad736..5302a1369c 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -69,7 +69,8 @@ extern void dataflash_print_info(void);
#endif
#if defined(CONFIG_HARD_I2C) || \
- defined(CONFIG_SOFT_I2C)
+ defined(CONFIG_SOFT_I2C) || \
+ defined(CONFIG_SYS_I2C)
#include <i2c.h>
#endif
@@ -169,7 +170,11 @@ static int display_dram_config(void)
static int init_func_i2c(void)
{
puts("I2C: ");
+#ifdef CONFIG_SYS_I2C
+ i2c_init_all();
+#else
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
puts("ready\n");
return (0);
}
diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c
index f1d55470e8..10223bdb79 100644
--- a/arch/blackfin/lib/board.c
+++ b/arch/blackfin/lib/board.c
@@ -37,6 +37,10 @@
int post_flag;
#endif
+#if defined(CONFIG_SYS_I2C)
+#include <i2c.h>
+#endif
+
DECLARE_GLOBAL_DATA_PTR;
__attribute__((always_inline))
@@ -387,6 +391,9 @@ void board_init_r(gd_t * id, ulong dest_addr)
mmc_initialize(bd);
#endif
+#if defined(CONFIG_SYS_I2C)
+ i2c_reloc_fixup();
+#endif
/* relocate environment function pointers etc. */
env_relocate();
diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c
index efc9fccc1b..582f47b50e 100644
--- a/arch/m68k/lib/board.c
+++ b/arch/m68k/lib/board.c
@@ -56,7 +56,7 @@
#include <version.h>
#if defined(CONFIG_HARD_I2C) || \
- defined(CONFIG_SOFT_I2C)
+ defined(CONFIG_SOFT_I2C)
#include <i2c.h>
#endif
@@ -142,11 +142,16 @@ static int init_func_ram (void)
/***********************************************************************/
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) || \
+ defined(CONFIG_SYS_I2C)
static int init_func_i2c (void)
{
puts ("I2C: ");
+#ifdef CONFIG_SYS_I2C
+ i2c_init_all();
+#else
i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
puts ("ready\n");
return (0);
}
@@ -178,7 +183,8 @@ init_fnc_t *init_sequence[] = {
display_options,
checkcpu,
checkboard,
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) || \
+ defined(CONFIG_SYS_I2C)
init_func_i2c,
#endif
#if defined(CONFIG_HARD_SPI)
@@ -501,6 +507,11 @@ void board_init_r (gd_t *id, ulong dest_addr)
spi_init_r ();
#endif
+#if defined(CONFIG_SYS_I2C)
+ /* Adjust I2C subsystem pointers after relocation */
+ i2c_reloc_fixup();
+#endif
+
/* relocate environment function pointers etc. */
env_relocate ();
diff --git a/arch/nds32/lib/board.c b/arch/nds32/lib/board.c
index 1157d8c503..29fe12014b 100644
--- a/arch/nds32/lib/board.c
+++ b/arch/nds32/lib/board.c
@@ -40,6 +40,10 @@
DECLARE_GLOBAL_DATA_PTR;
+#if defined(CONFIG_SYS_I2C)
+#include <i2c.h>
+#endif
+
ulong monitor_flash_len;
/*
@@ -173,7 +177,7 @@ init_fnc_t *init_sequence[] = {
#if defined(CONFIG_DISPLAY_BOARDINFO)
checkboard, /* display board info */
#endif
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
init_func_i2c,
#endif
dram_init, /* configure available RAM banks */
@@ -347,6 +351,10 @@ void board_init_r(gd_t *id, ulong dest_addr)
mmc_initialize(gd->bd);
#endif
+#if defined(CONFIG_SYS_I2C_ADAPTERS)
+ i2c_reloc_fixup();
+#endif
+
/* initialize environment */
env_relocate();
diff --git a/arch/powerpc/cpu/mpc8xx/video.c b/arch/powerpc/cpu/mpc8xx/video.c
index 1bbf4ccc65..10e3e88b5e 100644
--- a/arch/powerpc/cpu/mpc8xx/video.c
+++ b/arch/powerpc/cpu/mpc8xx/video.c
@@ -809,7 +809,11 @@ static void video_encoder_init (void)
/* Initialize the I2C */
debug ("[VIDEO ENCODER] Initializing I2C bus...\n");
+#ifdef CONFIG_SYS_I2C
+ i2c_init_all();
+#else
i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
#ifdef CONFIG_FADS
/* Reset ADV7176 chip */
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index fc4c1d5812..0c2e008e00 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -99,7 +99,7 @@ extern void sc3_read_eeprom(void);
void doc_init(void);
#endif
#if defined(CONFIG_HARD_I2C) || \
- defined(CONFIG_SOFT_I2C)
+ defined(CONFIG_SOFT_I2C)
#include <i2c.h>
#endif
#include <spi.h>
@@ -214,11 +214,16 @@ static int init_func_ram(void)
/***********************************************************************/
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) || \
+ defined(CONFIG_SYS_I2C)
static int init_func_i2c(void)
{
puts("I2C: ");
+#ifdef CONFIG_SYS_I2C
+ i2c_init_all();
+#else
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
puts("ready\n");
return 0;
}
@@ -307,7 +312,8 @@ static init_fnc_t *init_sequence[] = {
misc_init_f,
#endif
INIT_FUNC_WATCHDOG_RESET
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) || \
+ defined(CONFIG_SYS_I2C)
init_func_i2c,
#endif
#if defined(CONFIG_HARD_SPI)
diff --git a/common/board_f.c b/common/board_f.c
index ab4242a77e..ca9a7603ed 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -261,7 +261,8 @@ void __dram_init_banksize(void)
void dram_init_banksize(void)
__attribute__((weak, alias("__dram_init_banksize")));
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) || \
+ defined(CONFIG_SYS_I2C)
static int init_func_i2c(void)
{
puts("I2C: ");
@@ -919,7 +920,8 @@ static init_fnc_t init_sequence_f[] = {
misc_init_f,
#endif
INIT_FUNC_WATCHDOG_RESET
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) || \
+ defined(CONFIG_SYS_I2C)
init_func_i2c,
#endif
#if defined(CONFIG_HARD_SPI)
diff --git a/common/cmd_date.c b/common/cmd_date.c
index 0ac032cf30..f7ae1da1e2 100644
--- a/common/cmd_date.c
+++ b/common/cmd_date.c
@@ -50,8 +50,13 @@ static int do_date(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
int old_bus;
/* switch to correct I2C bus */
+#ifdef CONFIG_SYS_I2C
+ old_bus = i2c_get_bus_num();
+ i2c_set_bus_num(CONFIG_SYS_RTC_BUS_NUM);
+#else
old_bus = I2C_GET_BUS();
I2C_SET_BUS(CONFIG_SYS_RTC_BUS_NUM);
+#endif
switch (argc) {
case 2: /* set date & time */
@@ -97,7 +102,11 @@ static int do_date(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
}
/* switch back to original I2C bus */
+#ifdef CONFIG_SYS_I2C
+ i2c_set_bus_num(old_bus);
+#else
I2C_SET_BUS(old_bus);
+#endif
return rcode;
}
diff --git a/common/cmd_dtt.c b/common/cmd_dtt.c
index edbd4a83ca..c3f8982a71 100644
--- a/common/cmd_dtt.c
+++ b/common/cmd_dtt.c
@@ -73,8 +73,13 @@ int dtt_i2c(void)
/* Force a compilation error, if there are more then 32 sensors */
BUILD_BUG_ON(sizeof(sensors) > 32);
/* switch to correct I2C bus */
+#ifdef CONFIG_SYS_I2C
+ old_bus = i2c_get_bus_num();
+ i2c_set_bus_num(CONFIG_SYS_DTT_BUS_NUM);
+#else
old_bus = I2C_GET_BUS();
I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM);
+#endif
_initialize_dtt();
@@ -86,8 +91,12 @@ int dtt_i2c(void)
printf("DTT%d: %i C\n", i + 1, dtt_get_temp(sensors[i]));
/* switch back to original I2C bus */
+#ifdef CONFIG_SYS_I2C
+ i2c_set_bus_num(old_bus);
+#else
I2C_SET_BUS(old_bus);
#endif
+#endif
return 0;
}
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index 4380794474..5614a6d066 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -1,4 +1,9 @@
/*
+ * (C) Copyright 2009
+ * Sergey Kubushyn, himself, ksi@koi8.net
+ *
+ * Changes for unified multibus/multiadapter I2C support.
+ *
* (C) Copyright 2001
* Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com.
*
@@ -85,6 +90,8 @@
#include <asm/byteorder.h>
#include <linux/compiler.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* Display values from last command.
* Memory modify remembered values are different from display memory.
*/
@@ -103,7 +110,8 @@ static uint i2c_mm_last_alen;
* pairs. The following macros take care of this */
#if defined(CONFIG_SYS_I2C_NOPROBES)
-#if defined(CONFIG_I2C_MULTI_BUS)
+#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MUX) || \
+ defined(CONFIG_I2C_MULTI_BUS)
static struct
{
uchar bus;
@@ -119,7 +127,7 @@ static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES;
#define COMPARE_BUS(b,i) ((b) == 0) /* Make compiler happy */
#define COMPARE_ADDR(a,i) (i2c_no_probes[(i)] == (a))
#define NO_PROBE_ADDR(i) i2c_no_probes[(i)]
-#endif /* CONFIG_MULTI_BUS */
+#endif /* defined(CONFIG_SYS_I2C) */
#define NUM_ELEMENTS_NOPROBE (sizeof(i2c_no_probes)/sizeof(i2c_no_probes[0]))
#endif
@@ -127,9 +135,6 @@ static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES;
#if defined(CONFIG_I2C_MUX)
static I2C_MUX_DEVICE *i2c_mux_devices = NULL;
static int i2c_mux_busid = CONFIG_SYS_MAX_I2C_BUS;
-
-DECLARE_GLOBAL_DATA_PTR;
-
#endif
#define DISP_LINE_LEN 16
@@ -144,7 +149,6 @@ DECLARE_GLOBAL_DATA_PTR;
__weak
void i2c_init_board(void)
{
- return;
}
/* TODO: Implement architecture-specific get/set functions */
@@ -161,6 +165,11 @@ void i2c_init_board(void)
*
* Returns I2C bus speed in Hz.
*/
+#if !defined(CONFIG_SYS_I2C)
+/*
+ * TODO: Implement architecture-specific get/set functions
+ * Should go away, if we switched completely to new multibus support
+ */
__weak
unsigned int i2c_get_bus_speed(void)
{
@@ -188,6 +197,7 @@ int i2c_set_bus_speed(unsigned int speed)
return 0;
}
+#endif
/**
* get_alen() - Small parser helper function to get address length
@@ -700,7 +710,7 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
int found = 0;
#if defined(CONFIG_SYS_I2C_NOPROBES)
int k, skip;
- uchar bus = GET_BUS_NUM;
+ unsigned int bus = GET_BUS_NUM;
#endif /* NOPROBES */
if (argc == 2)
@@ -1373,9 +1383,8 @@ int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
}
#endif /* CONFIG_I2C_EDID */
-#if defined(CONFIG_I2C_MUX)
/**
- * do_i2c_add_bus() - Handle the "i2c bus" command-line command
+ * do_i2c_show_bus() - Handle the "i2c bus" command-line command
* @cmdtp: Command data struct pointer
* @flag: Command flag
* @argc: Command-line argument count
@@ -1383,35 +1392,55 @@ int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
*
* Returns zero always.
*/
-static int do_i2c_add_bus(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+#if defined(CONFIG_SYS_I2C)
+int do_i2c_show_bus(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- int ret=0;
+ int i;
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+ int j;
+#endif
if (argc == 1) {
/* show all busses */
- I2C_MUX *mux;
- I2C_MUX_DEVICE *device = i2c_mux_devices;
-
- printf ("Busses reached over muxes:\n");
- while (device != NULL) {
- printf ("Bus ID: %x\n", device->busid);
- printf (" reached over Mux(es):\n");
- mux = device->mux;
- while (mux != NULL) {
- printf (" %s@%x ch: %x\n", mux->name, mux->chip, mux->channel);
- mux = mux->next;
+ for (i = 0; i < CONFIG_SYS_NUM_I2C_BUSES; i++) {
+ printf("Bus %d:\t%s", i, I2C_ADAP_NR(i)->name);
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+ for (j = 0; j < CONFIG_SYS_I2C_MAX_HOPS; j++) {
+ if (i2c_bus[i].next_hop[j].chip == 0)
+ break;
+ printf("->%s@0x%2x:%d",
+ i2c_bus[i].next_hop[j].mux.name,
+ i2c_bus[i].next_hop[j].chip,
+ i2c_bus[i].next_hop[j].channel);
}
- device = device->next;
+#endif
+ printf("\n");
}
} else {
- (void)i2c_mux_ident_muxstring ((uchar *)argv[1]);
- ret = 0;
+ /* show specific bus */
+ i = simple_strtoul(argv[1], NULL, 10);
+ if (i >= CONFIG_SYS_NUM_I2C_BUSES) {
+ printf("Invalid bus %d\n", i);
+ return -1;
+ }
+ printf("Bus %d:\t%s", i, I2C_ADAP_NR(i)->name);
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+ for (j = 0; j < CONFIG_SYS_I2C_MAX_HOPS; j++) {
+ if (i2c_bus[i].next_hop[j].chip == 0)
+ break;
+ printf("->%s@0x%2x:%d",
+ i2c_bus[i].next_hop[j].mux.name,
+ i2c_bus[i].next_hop[j].chip,
+ i2c_bus[i].next_hop[j].channel);
+ }
+#endif
+ printf("\n");
}
- return ret;
+
+ return 0;
}
-#endif /* CONFIG_I2C_MUX */
+#endif
-#if defined(CONFIG_I2C_MULTI_BUS)
/**
* do_i2c_bus_num() - Handle the "i2c dev" command-line command
* @cmdtp: Command data struct pointer
@@ -1422,23 +1451,29 @@ static int do_i2c_add_bus(cmd_tbl_t * cmdtp, int flag, int argc, char * const ar
* Returns zero on success, CMD_RET_USAGE in case of misuse and negative
* on error.
*/
-static int do_i2c_bus_num(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS)
+int do_i2c_bus_num(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- int bus_idx, ret=0;
+ int ret = 0;
+ unsigned int bus_no;
if (argc == 1)
/* querying current setting */
printf("Current bus is %d\n", i2c_get_bus_num());
else {
- bus_idx = simple_strtoul(argv[1], NULL, 10);
- printf("Setting bus to %d\n", bus_idx);
- ret = i2c_set_bus_num(bus_idx);
+ bus_no = simple_strtoul(argv[1], NULL, 10);
+ if (bus_no >= CONFIG_SYS_NUM_I2C_BUSES) {
+ printf("Invalid bus %d\n", bus_no);
+ return -1;
+ }
+ printf("Setting bus to %d\n", bus_no);
+ ret = i2c_set_bus_num(bus_no);
if (ret)
printf("Failure changing bus number (%d)\n", ret);
}
return ret;
}
-#endif /* CONFIG_I2C_MULTI_BUS */
+#endif /* defined(CONFIG_SYS_I2C) */
/**
* do_i2c_bus_speed() - Handle the "i2c speed" command-line command
@@ -1508,16 +1543,21 @@ static int do_i2c_nm(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
*/
static int do_i2c_reset(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
+#if defined(CONFIG_SYS_I2C)
+ i2c_init(I2C_ADAP->speed, I2C_ADAP->slaveaddr);
+#else
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
return 0;
}
static cmd_tbl_t cmd_i2c_sub[] = {
-#if defined(CONFIG_I2C_MUX)
- U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_add_bus, "", ""),
+#if defined(CONFIG_SYS_I2C)
+ U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_show_bus, "", ""),
#endif /* CONFIG_I2C_MUX */
U_BOOT_CMD_MKENT(crc32, 3, 1, do_i2c_crc, "", ""),
-#if defined(CONFIG_I2C_MULTI_BUS)
+#if defined(CONFIG_SYS_I2C) || \
+ defined(CONFIG_I2C_MULTI_BUS)
U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""),
#endif /* CONFIG_I2C_MULTI_BUS */
#if defined(CONFIG_I2C_EDID)
@@ -1576,11 +1616,12 @@ static int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
/***************************************************/
#ifdef CONFIG_SYS_LONGHELP
static char i2c_help_text[] =
-#if defined(CONFIG_I2C_MUX)
- "bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes\ni2c "
+#if defined(CONFIG_SYS_I2C)
+ "bus [muxtype:muxaddr:muxchannel] - show I2C bus info\n"
#endif /* CONFIG_I2C_MUX */
"crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
-#if defined(CONFIG_I2C_MULTI_BUS)
+#if defined(CONFIG_SYS_I2C) || \
+ defined(CONFIG_I2C_MULTI_BUS)
"i2c dev [dev] - show or set current I2C bus\n"
#endif /* CONFIG_I2C_MULTI_BUS */
#if defined(CONFIG_I2C_EDID)
diff --git a/common/env_eeprom.c b/common/env_eeprom.c
index 45c935b6df..fbd459ac20 100644
--- a/common/env_eeprom.c
+++ b/common/env_eeprom.c
@@ -49,6 +49,10 @@ static int eeprom_bus_read(unsigned dev_addr, unsigned offset,
#if defined(CONFIG_I2C_ENV_EEPROM_BUS)
int old_bus = i2c_get_bus_num();
+#if defined(CONFIG_SYS_I2C)
+ if (old_bus != CONFIG_I2C_ENV_EEPROM_BUS)
+ i2c_set_bus_num(CONFIG_I2C_ENV_EEPROM_BUS);
+#else
if (gd->flags & GD_FLG_RELOC) {
if (env_eeprom_bus == -1) {
I2C_MUX_DEVICE *dev = NULL;
@@ -68,11 +72,16 @@ static int eeprom_bus_read(unsigned dev_addr, unsigned offset,
(uchar *)CONFIG_I2C_ENV_EEPROM_BUS);
}
#endif
+#endif
rcode = eeprom_read(dev_addr, offset, buffer, cnt);
#if defined(CONFIG_I2C_ENV_EEPROM_BUS)
+#if defined(CONFIG_SYS_I2C)
+ if (old_bus != CONFIG_I2C_ENV_EEPROM_BUS)
+#else
if (old_bus != env_eeprom_bus)
+#endif
i2c_set_bus_num(old_bus);
#endif
return rcode;
@@ -85,8 +94,13 @@ static int eeprom_bus_write(unsigned dev_addr, unsigned offset,
#if defined(CONFIG_I2C_ENV_EEPROM_BUS)
int old_bus = i2c_get_bus_num();
+#if defined(CONFIG_SYS_I2C)
+ if (old_bus != CONFIG_I2C_ENV_EEPROM_BUS)
+ i2c_set_bus_num(CONFIG_I2C_ENV_EEPROM_BUS);
+#else
rcode = i2c_mux_ident_muxstring_f((uchar *)CONFIG_I2C_ENV_EEPROM_BUS);
#endif
+#endif
rcode = eeprom_write(dev_addr, offset, buffer, cnt);
#if defined(CONFIG_I2C_ENV_EEPROM_BUS)
i2c_set_bus_num(old_bus);
diff --git a/common/stdio.c b/common/stdio.c
index 5d5117c0ed..2011880549 100644
--- a/common/stdio.c
+++ b/common/stdio.c
@@ -1,4 +1,8 @@
/*
+ * Copyright (C) 2009 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Changes for multibus/multiadapter I2C support.
+ *
* (C) Copyright 2000
* Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
*
@@ -30,7 +34,8 @@
#ifdef CONFIG_LOGBUFFER
#include <logbuff.h>
#endif
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) || \
+ defined(CONFIG_SYS_I2C_ADAPTERS)
#include <i2c.h>
#endif
@@ -210,9 +215,15 @@ int stdio_init (void)
#ifdef CONFIG_ARM_DCC
drv_arm_dcc_init ();
#endif
+#ifdef CONFIG_SYS_I2C
+#ifdef CONFIG_SYS_I2C_ADAPTERS
+ i2c_init_all();
+#endif
+#else
#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
+#endif
#ifdef CONFIG_LCD
drv_lcd_init ();
#endif
diff --git a/include/i2c.h b/include/i2c.h
index 457fd7d560..3e09af9141 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -220,15 +220,6 @@ int i2c_mux_ident_muxstring_f (uchar *buf);
#ifdef CONFIG_SYS_I2C
/*
- * Initialization, must be called once on start up, may be called
- * repeatedly to change the speed and slave addresses.
- */
-void i2c_init(unsigned int speed, int slaveaddr);
-#ifdef CONFIG_SYS_I2C_INIT_BOARD
-void i2c_init_board(void);
-#endif
-
-/*
* i2c_get_bus_num:
*
* Returns index of currently active I2C bus. Zero-based.