summaryrefslogtreecommitdiff
path: root/include/configs/yosemite.h
diff options
context:
space:
mode:
authorWolfgang Denk <wd@pollux.(none)>2005-08-02 17:06:17 +0200
committerWolfgang Denk <wd@pollux.(none)>2005-08-02 17:06:17 +0200
commit095b8a3798f1c6cd618092899e783dc2ee0d23f5 (patch)
tree397887e662586728029560b27873451b4547c430 /include/configs/yosemite.h
parent797638f9ff2dc8e57f7bf57bfaa83d60e0784ea0 (diff)
Coding style cleanup
Diffstat (limited to 'include/configs/yosemite.h')
-rw-r--r--include/configs/yosemite.h68
1 files changed, 34 insertions, 34 deletions
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 5f88306419..18d6623280 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -28,11 +28,11 @@
/*-----------------------------------------------------------------------
* High Level Configuration Options
*----------------------------------------------------------------------*/
-#define CONFIG_YOSEMITE 1 /* Board is BAMBOO */
+#define CONFIG_YOSEMITE 1 /* Board is BAMBOO */
#define CONFIG_440_EP 1 /* Specific PPC440EP support */
#define CONFIG_4xx 1 /* ... PPC4xx family */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#undef CFG_DRAM_TEST /* disable - takes long time! */
#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
@@ -63,14 +63,14 @@
*----------------------------------------------------------------------*/
#define CFG_INIT_RAM_ADDR 0xf0000000 /* DCache */
#define CFG_INIT_RAM_END 0x2000
-#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
-#define CFG_KBYTES_SDRAM ( 128 * 1024) /* 128MB */
-#define CFG_SDRAM_BANKS (2)
+#define CFG_KBYTES_SDRAM ( 128 * 1024) /* 128MB */
+#define CFG_SDRAM_BANKS (2)
/*-----------------------------------------------------------------------
* Serial Port
*----------------------------------------------------------------------*/
@@ -92,7 +92,7 @@
*
*----------------------------------------------------------------------*/
#define CFG_NVRAM_SIZE (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */
-#define CONFIG_RTC_DS1556 1 /* DS1556 RTC */
+#define CONFIG_RTC_DS1556 1 /* DS1556 RTC */
/*-----------------------------------------------------------------------
* FLASH related
@@ -105,9 +105,9 @@
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 120000 /* Timeout for Flash Write (in ms) */
#else
-#define CFG_FLASH_CFI /* The flash is CFI compatible */
-#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
-#define CFG_FLASH_CFI_AMD_RESET 1 /* AMD RESET for STM 29W320DB! */
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+#define CFG_FLASH_CFI_AMD_RESET 1 /* AMD RESET for STM 29W320DB! */
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
@@ -121,7 +121,7 @@
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
-#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
+#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
/*-----------------------------------------------------------------------
* I2C
@@ -135,7 +135,7 @@
/*-----------------------------------------------------------------------
* Environment
*----------------------------------------------------------------------*/
-#undef CFG_ENV_IS_IN_NVRAM /*No NVRAM on board*/
+#undef CFG_ENV_IS_IN_NVRAM /*No NVRAM on board*/
#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */
#define CFG_ENV_IS_IN_EEPROM 1
@@ -158,7 +158,7 @@
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_NET_MULTI 1 /* required for netconsole */
+#define CONFIG_NET_MULTI 1 /* required for netconsole */
#define CONFIG_PHY1_ADDR 3
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
@@ -192,48 +192,48 @@
#ifdef CONFIG_440_EP
/* Need to define POST */
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
CFG_CMD_ECHO | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
- /* CFG_CMD_EXT2 |*/ \
+ /* CFG_CMD_EXT2 |*/ \
/* CFG_CMD_FAT |*/ \
CFG_CMD_I2C | \
/* CFG_CMD_IDE |*/ \
CFG_CMD_IRQ | \
- /* CFG_CMD_KGDB |*/ \
- CFG_CMD_MII | \
+ /* CFG_CMD_KGDB |*/ \
+ CFG_CMD_MII | \
CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
CFG_CMD_SDRAM | \
- CFG_CMD_FLASH | \
+ CFG_CMD_FLASH | \
/* CFG_CMD_SPI |*/ \
CFG_CMD_USB | \
0 ) & ~CFG_CMD_IMLS)
#else
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
CFG_CMD_ECHO | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
- /* CFG_CMD_EXT2 |*/ \
+ /* CFG_CMD_EXT2 |*/ \
/* CFG_CMD_FAT |*/ \
CFG_CMD_I2C | \
/* CFG_CMD_IDE |*/ \
CFG_CMD_IRQ | \
- /* CFG_CMD_KGDB |*/ \
- CFG_CMD_MII | \
+ /* CFG_CMD_KGDB |*/ \
+ CFG_CMD_MII | \
CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
CFG_CMD_SDRAM | \
- CFG_CMD_FLASH | \
+ CFG_CMD_FLASH | \
/* CFG_CMD_SPI |*/ \
0 ) & ~CFG_CMD_IMLS)
#endif
@@ -260,7 +260,7 @@
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-#define CONFIG_LYNXKDI 1 /* support kdi files */
+#define CONFIG_LYNXKDI 1 /* support kdi files */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
@@ -269,18 +269,18 @@
*-----------------------------------------------------------------------
*/
/* General PCI */
-#define CONFIG_PCI /* include pci support */
-#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
+#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
/* Board-specific PCI */
-#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
+#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT
#define CFG_PCI_MASTER_INIT
-#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
-#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
+#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
+#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
/*
* For booting Linux, the board info and command line data