mmc: tegra2: rename tegra2_mmc.* to tegra_mmc.*

In anticipation of Tegra3 support, continue removing/renaming
Tegra2-specific files. No functional changes (yet).
Updated copyrights to 2012.

Signed-off-by: Tom Warren <twarren@nvidia.com>

1 files changed, 570 insertions, 0 deletions

diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c
new file mode 100644
index 0000000000..29bf58359d
--- /dev/null
+++ b/drivers/mmc/tegra_mmc.c
@@ -0,0 +1,570 @@
+/*
+ * (C) Copyright 2009 SAMSUNG Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Jaehoon Chung <jh80.chung@samsung.com>
+ * Portions Copyright 2011-2012 NVIDIA Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <common.h>
+#include <mmc.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/clk_rst.h>
+#include <asm/arch/clock.h>
+#include "tegra_mmc.h"
+
+/* support 4 mmc hosts */
+struct mmc mmc_dev[4];
+struct mmc_host mmc_host[4];
+
+
+/**
+ * Get the host address and peripheral ID for a device. Devices are numbered
+ * from 0 to 3.
+ *
+ * @param host		Structure to fill in (base, reg, mmc_id)
+ * @param dev_index	Device index (0-3)
+ */
+static void tegra2_get_setup(struct mmc_host *host, int dev_index)
+{
+	debug("tegra2_get_base_mmc: dev_index = %d\n", dev_index);
+
+	switch (dev_index) {
+	case 1:
+		host->base = TEGRA2_SDMMC3_BASE;
+		host->mmc_id = PERIPH_ID_SDMMC3;
+		break;
+	case 2:
+		host->base = TEGRA2_SDMMC2_BASE;
+		host->mmc_id = PERIPH_ID_SDMMC2;
+		break;
+	case 3:
+		host->base = TEGRA2_SDMMC1_BASE;
+		host->mmc_id = PERIPH_ID_SDMMC1;
+		break;
+	case 0:
+	default:
+		host->base = TEGRA2_SDMMC4_BASE;
+		host->mmc_id = PERIPH_ID_SDMMC4;
+		break;
+	}
+
+	host->reg = (struct tegra2_mmc *)host->base;
+}
+
+static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data)
+{
+	unsigned char ctrl;
+
+	debug("data->dest: %08X, data->blocks: %u, data->blocksize: %u\n",
+	(u32)data->dest, data->blocks, data->blocksize);
+
+	writel((u32)data->dest, &host->reg->sysad);
+	/*
+	 * DMASEL[4:3]
+	 * 00 = Selects SDMA
+	 * 01 = Reserved
+	 * 10 = Selects 32-bit Address ADMA2
+	 * 11 = Selects 64-bit Address ADMA2
+	 */
+	ctrl = readb(&host->reg->hostctl);
+	ctrl &= ~TEGRA_MMC_HOSTCTL_DMASEL_MASK;
+	ctrl |= TEGRA_MMC_HOSTCTL_DMASEL_SDMA;
+	writeb(ctrl, &host->reg->hostctl);
+
+	/* We do not handle DMA boundaries, so set it to max (512 KiB) */
+	writew((7 << 12) | (data->blocksize & 0xFFF), &host->reg->blksize);
+	writew(data->blocks, &host->reg->blkcnt);
+}
+
+static void mmc_set_transfer_mode(struct mmc_host *host, struct mmc_data *data)
+{
+	unsigned short mode;
+	debug(" mmc_set_transfer_mode called\n");
+	/*
+	 * TRNMOD
+	 * MUL1SIN0[5]	: Multi/Single Block Select
+	 * RD1WT0[4]	: Data Transfer Direction Select
+	 *	1 = read
+	 *	0 = write
+	 * ENACMD12[2]	: Auto CMD12 Enable
+	 * ENBLKCNT[1]	: Block Count Enable
+	 * ENDMA[0]	: DMA Enable
+	 */
+	mode = (TEGRA_MMC_TRNMOD_DMA_ENABLE |
+		TEGRA_MMC_TRNMOD_BLOCK_COUNT_ENABLE);
+
+	if (data->blocks > 1)
+		mode |= TEGRA_MMC_TRNMOD_MULTI_BLOCK_SELECT;
+
+	if (data->flags & MMC_DATA_READ)
+		mode |= TEGRA_MMC_TRNMOD_DATA_XFER_DIR_SEL_READ;
+
+	if (data->flags & MMC_DATA_WRITE) {
+		if ((uintptr_t)data->src & (ARCH_DMA_MINALIGN - 1))
+			printf("Warning: unaligned write to %p may fail\n",
+			       data->src);
+		flush_dcache_range((ulong)data->src, (ulong)data->src +
+			data->blocks * data->blocksize);
+	}
+
+	writew(mode, &host->reg->trnmod);
+}
+
+static int mmc_wait_inhibit(struct mmc_host *host,
+			    struct mmc_cmd *cmd,
+			    struct mmc_data *data,
+			    unsigned int timeout)
+{
+	/*
+	 * PRNSTS
+	 * CMDINHDAT[1] : Command Inhibit (DAT)
+	 * CMDINHCMD[0] : Command Inhibit (CMD)
+	 */
+	unsigned int mask = TEGRA_MMC_PRNSTS_CMD_INHIBIT_CMD;
+
+	/*
+	 * We shouldn't wait for data inhibit for stop commands, even
+	 * though they might use busy signaling
+	 */
+	if ((data == NULL) && (cmd->resp_type & MMC_RSP_BUSY))
+		mask |= TEGRA_MMC_PRNSTS_CMD_INHIBIT_DAT;
+
+	while (readl(&host->reg->prnsts) & mask) {
+		if (timeout == 0) {
+			printf("%s: timeout error\n", __func__);
+			return -1;
+		}
+		timeout--;
+		udelay(1000);
+	}
+
+	return 0;
+}
+
+static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
+			struct mmc_data *data)
+{
+	struct mmc_host *host = (struct mmc_host *)mmc->priv;
+	int flags, i;
+	int result;
+	unsigned int mask = 0;
+	unsigned int retry = 0x100000;
+	debug(" mmc_send_cmd called\n");
+
+	result = mmc_wait_inhibit(host, cmd, data, 10 /* ms */);
+
+	if (result < 0)
+		return result;
+
+	if (data)
+		mmc_prepare_data(host, data);
+
+	debug("cmd->arg: %08x\n", cmd->cmdarg);
+	writel(cmd->cmdarg, &host->reg->argument);
+
+	if (data)
+		mmc_set_transfer_mode(host, data);
+
+	if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY))
+		return -1;
+
+	/*
+	 * CMDREG
+	 * CMDIDX[13:8]	: Command index
+	 * DATAPRNT[5]	: Data Present Select
+	 * ENCMDIDX[4]	: Command Index Check Enable
+	 * ENCMDCRC[3]	: Command CRC Check Enable
+	 * RSPTYP[1:0]
+	 *	00 = No Response
+	 *	01 = Length 136
+	 *	10 = Length 48
+	 *	11 = Length 48 Check busy after response
+	 */
+	if (!(cmd->resp_type & MMC_RSP_PRESENT))
+		flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_NO_RESPONSE;
+	else if (cmd->resp_type & MMC_RSP_136)
+		flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_136;
+	else if (cmd->resp_type & MMC_RSP_BUSY)
+		flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_48_BUSY;
+	else
+		flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_48;
+
+	if (cmd->resp_type & MMC_RSP_CRC)
+		flags |= TEGRA_MMC_TRNMOD_CMD_CRC_CHECK;
+	if (cmd->resp_type & MMC_RSP_OPCODE)
+		flags |= TEGRA_MMC_TRNMOD_CMD_INDEX_CHECK;
+	if (data)
+		flags |= TEGRA_MMC_TRNMOD_DATA_PRESENT_SELECT_DATA_TRANSFER;
+
+	debug("cmd: %d\n", cmd->cmdidx);
+
+	writew((cmd->cmdidx << 8) | flags, &host->reg->cmdreg);
+
+	for (i = 0; i < retry; i++) {
+		mask = readl(&host->reg->norintsts);
+		/* Command Complete */
+		if (mask & TEGRA_MMC_NORINTSTS_CMD_COMPLETE) {
+			if (!data)
+				writel(mask, &host->reg->norintsts);
+			break;
+		}
+	}
+
+	if (i == retry) {
+		printf("%s: waiting for status update\n", __func__);
+		writel(mask, &host->reg->norintsts);
+		return TIMEOUT;
+	}
+
+	if (mask & TEGRA_MMC_NORINTSTS_CMD_TIMEOUT) {
+		/* Timeout Error */
+		debug("timeout: %08x cmd %d\n", mask, cmd->cmdidx);
+		writel(mask, &host->reg->norintsts);
+		return TIMEOUT;
+	} else if (mask & TEGRA_MMC_NORINTSTS_ERR_INTERRUPT) {
+		/* Error Interrupt */
+		debug("error: %08x cmd %d\n", mask, cmd->cmdidx);
+		writel(mask, &host->reg->norintsts);
+		return -1;
+	}
+
+	if (cmd->resp_type & MMC_RSP_PRESENT) {
+		if (cmd->resp_type & MMC_RSP_136) {
+			/* CRC is stripped so we need to do some shifting. */
+			for (i = 0; i < 4; i++) {
+				unsigned int offset =
+					(unsigned int)(&host->reg->rspreg3 - i);
+				cmd->response[i] = readl(offset) << 8;
+
+				if (i != 3) {
+					cmd->response[i] |=
+						readb(offset - 1);
+				}
+				debug("cmd->resp[%d]: %08x\n",
+						i, cmd->response[i]);
+			}
+		} else if (cmd->resp_type & MMC_RSP_BUSY) {
+			for (i = 0; i < retry; i++) {
+				/* PRNTDATA[23:20] : DAT[3:0] Line Signal */
+				if (readl(&host->reg->prnsts)
+					& (1 << 20))	/* DAT[0] */
+					break;
+			}
+
+			if (i == retry) {
+				printf("%s: card is still busy\n", __func__);
+				writel(mask, &host->reg->norintsts);
+				return TIMEOUT;
+			}
+
+			cmd->response[0] = readl(&host->reg->rspreg0);
+			debug("cmd->resp[0]: %08x\n", cmd->response[0]);
+		} else {
+			cmd->response[0] = readl(&host->reg->rspreg0);
+			debug("cmd->resp[0]: %08x\n", cmd->response[0]);
+		}
+	}
+
+	if (data) {
+		unsigned long	start = get_timer(0);
+
+		while (1) {
+			mask = readl(&host->reg->norintsts);
+
+			if (mask & TEGRA_MMC_NORINTSTS_ERR_INTERRUPT) {
+				/* Error Interrupt */
+				writel(mask, &host->reg->norintsts);
+				printf("%s: error during transfer: 0x%08x\n",
+						__func__, mask);
+				return -1;
+			} else if (mask & TEGRA_MMC_NORINTSTS_DMA_INTERRUPT) {
+				/*
+				 * DMA Interrupt, restart the transfer where
+				 * it was interrupted.
+				 */
+				unsigned int address = readl(&host->reg->sysad);
+
+				debug("DMA end\n");
+				writel(TEGRA_MMC_NORINTSTS_DMA_INTERRUPT,
+				       &host->reg->norintsts);
+				writel(address, &host->reg->sysad);
+			} else if (mask & TEGRA_MMC_NORINTSTS_XFER_COMPLETE) {
+				/* Transfer Complete */
+				debug("r/w is done\n");
+				break;
+			} else if (get_timer(start) > 2000UL) {
+				writel(mask, &host->reg->norintsts);
+				printf("%s: MMC Timeout\n"
+				       "    Interrupt status        0x%08x\n"
+				       "    Interrupt status enable 0x%08x\n"
+				       "    Interrupt signal enable 0x%08x\n"
+				       "    Present status          0x%08x\n",
+				       __func__, mask,
+				       readl(&host->reg->norintstsen),
+				       readl(&host->reg->norintsigen),
+				       readl(&host->reg->prnsts));
+				return -1;
+			}
+		}
+		writel(mask, &host->reg->norintsts);
+		if (data->flags & MMC_DATA_READ) {
+			if ((uintptr_t)data->dest & (ARCH_DMA_MINALIGN - 1))
+				printf("Warning: unaligned read from %p "
+					"may fail\n", data->dest);
+			invalidate_dcache_range((ulong)data->dest,
+				(ulong)data->dest +
+					data->blocks * data->blocksize);
+		}
+	}
+
+	udelay(1000);
+	return 0;
+}
+
+static void mmc_change_clock(struct mmc_host *host, uint clock)
+{
+	int div;
+	unsigned short clk;
+	unsigned long timeout;
+
+	debug(" mmc_change_clock called\n");
+
+	/*
+	 * Change Tegra2 SDMMCx clock divisor here. Source is 216MHz,
+	 * PLLP_OUT0
+	 */
+	if (clock == 0)
+		goto out;
+	clock_adjust_periph_pll_div(host->mmc_id, CLOCK_ID_PERIPH, clock,
+				    &div);
+	debug("div = %d\n", div);
+
+	writew(0, &host->reg->clkcon);
+
+	/*
+	 * CLKCON
+	 * SELFREQ[15:8]	: base clock divided by value
+	 * ENSDCLK[2]		: SD Clock Enable
+	 * STBLINTCLK[1]	: Internal Clock Stable
+	 * ENINTCLK[0]		: Internal Clock Enable
+	 */
+	div >>= 1;
+	clk = ((div << TEGRA_MMC_CLKCON_SDCLK_FREQ_SEL_SHIFT) |
+	       TEGRA_MMC_CLKCON_INTERNAL_CLOCK_ENABLE);
+	writew(clk, &host->reg->clkcon);
+
+	/* Wait max 10 ms */
+	timeout = 10;
+	while (!(readw(&host->reg->clkcon) &
+		 TEGRA_MMC_CLKCON_INTERNAL_CLOCK_STABLE)) {
+		if (timeout == 0) {
+			printf("%s: timeout error\n", __func__);
+			return;
+		}
+		timeout--;
+		udelay(1000);
+	}
+
+	clk |= TEGRA_MMC_CLKCON_SD_CLOCK_ENABLE;
+	writew(clk, &host->reg->clkcon);
+
+	debug("mmc_change_clock: clkcon = %08X\n", clk);
+
+out:
+	host->clock = clock;
+}
+
+static void mmc_set_ios(struct mmc *mmc)
+{
+	struct mmc_host *host = mmc->priv;
+	unsigned char ctrl;
+	debug(" mmc_set_ios called\n");
+
+	debug("bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock);
+
+	/* Change clock first */
+	mmc_change_clock(host, mmc->clock);
+
+	ctrl = readb(&host->reg->hostctl);
+
+	/*
+	 * WIDE8[5]
+	 * 0 = Depend on WIDE4
+	 * 1 = 8-bit mode
+	 * WIDE4[1]
+	 * 1 = 4-bit mode
+	 * 0 = 1-bit mode
+	 */
+	if (mmc->bus_width == 8)
+		ctrl |= (1 << 5);
+	else if (mmc->bus_width == 4)
+		ctrl |= (1 << 1);
+	else
+		ctrl &= ~(1 << 1);
+
+	writeb(ctrl, &host->reg->hostctl);
+	debug("mmc_set_ios: hostctl = %08X\n", ctrl);
+}
+
+static void mmc_reset(struct mmc_host *host)
+{
+	unsigned int timeout;
+	debug(" mmc_reset called\n");
+
+	/*
+	 * RSTALL[0] : Software reset for all
+	 * 1 = reset
+	 * 0 = work
+	 */
+	writeb(TEGRA_MMC_SWRST_SW_RESET_FOR_ALL, &host->reg->swrst);
+
+	host->clock = 0;
+
+	/* Wait max 100 ms */
+	timeout = 100;
+
+	/* hw clears the bit when it's done */
+	while (readb(&host->reg->swrst) & TEGRA_MMC_SWRST_SW_RESET_FOR_ALL) {
+		if (timeout == 0) {
+			printf("%s: timeout error\n", __func__);
+			return;
+		}
+		timeout--;
+		udelay(1000);
+	}
+}
+
+static int mmc_core_init(struct mmc *mmc)
+{
+	struct mmc_host *host = (struct mmc_host *)mmc->priv;
+	unsigned int mask;
+	debug(" mmc_core_init called\n");
+
+	mmc_reset(host);
+
+	host->version = readw(&host->reg->hcver);
+	debug("host version = %x\n", host->version);
+
+	/* mask all */
+	writel(0xffffffff, &host->reg->norintstsen);
+	writel(0xffffffff, &host->reg->norintsigen);
+
+	writeb(0xe, &host->reg->timeoutcon);	/* TMCLK * 2^27 */
+	/*
+	 * NORMAL Interrupt Status Enable Register init
+	 * [5] ENSTABUFRDRDY : Buffer Read Ready Status Enable
+	 * [4] ENSTABUFWTRDY : Buffer write Ready Status Enable
+	 * [3] ENSTADMAINT   : DMA boundary interrupt
+	 * [1] ENSTASTANSCMPLT : Transfre Complete Status Enable
+	 * [0] ENSTACMDCMPLT : Command Complete Status Enable
+	*/
+	mask = readl(&host->reg->norintstsen);
+	mask &= ~(0xffff);
+	mask |= (TEGRA_MMC_NORINTSTSEN_CMD_COMPLETE |
+		 TEGRA_MMC_NORINTSTSEN_XFER_COMPLETE |
+		 TEGRA_MMC_NORINTSTSEN_DMA_INTERRUPT |
+		 TEGRA_MMC_NORINTSTSEN_BUFFER_WRITE_READY |
+		 TEGRA_MMC_NORINTSTSEN_BUFFER_READ_READY);
+	writel(mask, &host->reg->norintstsen);
+
+	/*
+	 * NORMAL Interrupt Signal Enable Register init
+	 * [1] ENSTACMDCMPLT : Transfer Complete Signal Enable
+	 */
+	mask = readl(&host->reg->norintsigen);
+	mask &= ~(0xffff);
+	mask |= TEGRA_MMC_NORINTSIGEN_XFER_COMPLETE;
+	writel(mask, &host->reg->norintsigen);
+
+	return 0;
+}
+
+int tegra2_mmc_getcd(struct mmc *mmc)
+{
+	struct mmc_host *host = (struct mmc_host *)mmc->priv;
+
+	debug("tegra2_mmc_getcd called\n");
+
+	if (host->cd_gpio >= 0)
+		return !gpio_get_value(host->cd_gpio);
+
+	return 1;
+}
+
+int tegra2_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio)
+{
+	struct mmc_host *host;
+	char gpusage[12]; /* "SD/MMCn PWR" or "SD/MMCn CD" */
+	struct mmc *mmc;
+
+	debug(" tegra2_mmc_init: index %d, bus width %d "
+		"pwr_gpio %d cd_gpio %d\n",
+		dev_index, bus_width, pwr_gpio, cd_gpio);
+
+	host = &mmc_host[dev_index];
+
+	host->clock = 0;
+	host->pwr_gpio = pwr_gpio;
+	host->cd_gpio = cd_gpio;
+	tegra2_get_setup(host, dev_index);
+
+	clock_start_periph_pll(host->mmc_id, CLOCK_ID_PERIPH, 20000000);
+
+	if (host->pwr_gpio >= 0) {
+		sprintf(gpusage, "SD/MMC%d PWR", dev_index);
+		gpio_request(host->pwr_gpio, gpusage);
+		gpio_direction_output(host->pwr_gpio, 1);
+	}
+
+	if (host->cd_gpio >= 0) {
+		sprintf(gpusage, "SD/MMC%d CD", dev_index);
+		gpio_request(host->cd_gpio, gpusage);
+		gpio_direction_input(host->cd_gpio);
+	}
+
+	mmc = &mmc_dev[dev_index];
+
+	sprintf(mmc->name, "Tegra2 SD/MMC");
+	mmc->priv = host;
+	mmc->send_cmd = mmc_send_cmd;
+	mmc->set_ios = mmc_set_ios;
+	mmc->init = mmc_core_init;
+	mmc->getcd = tegra2_mmc_getcd;
+
+	mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
+	if (bus_width == 8)
+		mmc->host_caps = MMC_MODE_8BIT;
+	else
+		mmc->host_caps = MMC_MODE_4BIT;
+	mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC;
+
+	/*
+	 * min freq is for card identification, and is the highest
+	 *  low-speed SDIO card frequency (actually 400KHz)
+	 * max freq is highest HS eMMC clock as per the SD/MMC spec
+	 *  (actually 52MHz)
+	 * Both of these are the closest equivalents w/216MHz source
+	 *  clock and Tegra2 SDMMC divisors.
+	 */
+	mmc->f_min = 375000;
+	mmc->f_max = 48000000;
+
+	mmc_register(mmc);
+
+	return 0;
+}