hwmon: do not init sensors on startup

The U-Boot Design Principles[1] clearly say:

  Initialize devices only when they are needed within U-Boot, i.e. don't
  initialize the Ethernet interface(s) unless U-Boot performs a download
  over Ethernet; don't initialize any IDE or USB devices unless U-Boot
  actually tries to load files from these, etc. (and don't forget to
  shut down these devices after using them - otherwise nasty things may
  happen when you try to boot your OS).

So, do not initialize and read the sensors on startup.

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Holger Brunck <holger.brunck@keymile.com>

1 files changed, 1 insertions, 1 deletions

diff --git a/drivers/hwmon/adt7460.c b/drivers/hwmon/adt7460.c
index caef70aff5..b7e36fe461 100644
--- a/drivers/hwmon/adt7460.c
+++ b/drivers/hwmon/adt7460.c
@@ -50,7 +50,7 @@ int dtt_write(int sensor, int reg, int val)
 	return 0;
 }
 
-int dtt_init(void)
+int dtt_init_one(int sensor)
 {
 	printf("ADT7460 at I2C address 0x%2x\n", ADT7460_ADDRESS);