summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
authorwdenk <wdenk>2003-10-15 23:53:47 +0000
committerwdenk <wdenk>2003-10-15 23:53:47 +0000
commit42d1f0394bef0624fc9664714d54bb137931d6a6 (patch)
tree892a4130507484d25faf9a72e019cf88cfb3e3d9 /doc
parent2d5b561e2bfdee8552a99b2cf93016cce2a74895 (diff)
* Patches by Xianghua Xiao, 15 Oct 2003:
- Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
Diffstat (limited to 'doc')
-rw-r--r--doc/README.INCA-IP1
-rw-r--r--doc/README.mpc85xxads535
-rw-r--r--doc/README.nios2
3 files changed, 535 insertions, 3 deletions
diff --git a/doc/README.INCA-IP b/doc/README.INCA-IP
index 7421b6ed24..132915292e 100644
--- a/doc/README.INCA-IP
+++ b/doc/README.INCA-IP
@@ -41,7 +41,6 @@ to install a U-Boot image into flash.
go 0xb0000000
-
Ethernet autonegotiation needs some time to complete. Instead of
delaying the boot process in all cases, we just start the
autonegotiation process when U-Boot comes up and that is all. Most
diff --git a/doc/README.mpc85xxads b/doc/README.mpc85xxads
new file mode 100644
index 0000000000..3eb5d95744
--- /dev/null
+++ b/doc/README.mpc85xxads
@@ -0,0 +1,535 @@
+Motorola MPC8540ADS and MPC8560ADS board
+
+Xianghua Xiao(X.Xiao@motorola.com)
+Created 10/15/03
+-----------------------------------------
+
+1. SWITCH SETTINGS & JUMPERS
+1.1 First, make sure the board default setting is consistent with the document
+ shipped with your board. Then apply the following changes:
+ SW3[1-6]="all OFF" (boot from 32bit flash, no boot sequence is used)
+ SW10[2-6]="all OFF" (turn on CPM SCC for serial port,works for 8540/8560)
+ SW11[2]='OFF for dracom, ON for draco' (single switch to toggle draco.dracom mode)
+ SW4[7-8]="OFF OFF" (enable serial ports,I'm using the top serial connector)
+ SW22[1-4]="OFF OFF ON OFF"
+ SW5[1-10[="ON ON OFF OFF OFF OFF OFF OFF OFF OFF"
+ J1 = "Enable Prog" (Make sure your flash is programmable for development)
+ Ethernet PHY connectors(J47,J56) should be removed if you want to use the ethernet.
+1.2 If you want to test PCI functionality with a 33Mhz PCI card, you will have to change
+ the system clock from the default 66Mhz to 33Mhz by setting SW15[1]="OFF" and
+ SW17[8]="OFF". After that you may also need double your platform clock(SW6) because
+ the system clock is now only half of its original value.
+1.3 SW6 is a very important switch, it decides your platform clock and CPU clock based on
+ the on-board system clock(default 66MHz). Check the document along with your board
+ for details.
+
+2. MEMORY MAP TO WORK WITH LINUX KERNEL
+2.1. For the initial bringup, we adopted a consistent memory scheme between u-boot and
+ linux kernel, you can customize it based on your system requirements:
+ DDR: 0x00000000-0x1fffffff (max 512MB)
+ PCI: 0xe0000000-0xefffffff (256MB)
+ RIO: 0xf0000000-0xf7ffffff (128MB)
+ Local SDRAM: 0xf8000000-0xfbffffff (64MB)
+ Local CSx: 0xfc000000-0xfdefffff (31MB) BCSR,RTC,ATM config,etc.
+ CCSRBAR: 0xfdf00000-0xfdffffff (1MB)
+ Flash: 0xfe000000-0xffffffff (max 32MB)
+2.2 We are submitting Linux kernel patches for MPC8540 and MPC8560. Hope you will be
+ able to download them from linuxppc-2.4 public source by the time you are reading
+ this. Please make sure the kernel's ppcboot.h is consistent with U-Boot's u-boot.h,
+ then you can use two default configuration files in the kernel source as a test:
+ arch/ppc/configs/mpc8540ads_defconfig
+ arch/ppc/configs/mpc8560ads_defconfig
+
+3. DEFINITIONS AND COMPILATION
+3.1 Explanation on NEW definitions in include/configs/MPC8540ADS.h and include/
+ configs/MPC8560ADS.h
+ CONFIG_BOOKE BOOKE(e.g. Motorola MPC85xx, IBM 440, etc)
+ CONFIG_E500 BOOKE e500 family(Motorola)
+ CONFIG_MPC85xx MPC8540,MPC8560 and their derivatives
+ CONFIG_MPC85xx_REV1 MPC85xx Rev 1 Chip, in general you will use a Rev2
+ chip from Nov.2003. If you still see this definition
+ while you have a Rev2(and newer) chip,undef this.
+ CONFIG_MPC8540 MPC8540 specific
+ CONFIG_MPC8560 MPC8560 specific
+ CONFIG_MPC8540ADS MPC8540ADS board specific
+ CONFIG_MPC8560ADS MPC8560ADS board specific
+ CONFIG_TSEC_ENET Use on-chip 10/100/1000 ethernet for networking
+ CONFIG_SPD_EEPROM Use SPD EEPROM for DDR auto configuration, you can also
+ manual config the DDR after undef this definition.
+ CONFIG_DDR_ECC only for ECC DDR module
+ CONFIG_DDR_DLL possible DLL fix needed for Rev1 chip for more stability.
+ you can disable this if you're having a newer chip.
+ CONFIG_RAM_AS_FLASH after define this, you can load U-Boot into localbus
+ SDRAM and treat localbus SDRAM as a flash. We use this
+ memory based U-Boot before flash is working while Metrowerks
+ and Windriver are still working on their flash/JTAG tools.
+ if you can program the flash directly, undef this.
+ Other than the above definitions, the rest in the config files are straightforward.
+
+
+3.2 Compilation
+ export CROSS_COMPILE=your-cross-compile-prefix(assuming you're using BASH shell)
+ cd u-boot
+ make distclean
+ make MPC8560ADS_config (or make MPC8540ADS_config)
+ make
+
+4. Note on the 10/100/1000 Ethernet controller:
+4.1 Sometimes after U-Boot is up, the 'tftp' won't work well with TSEC ethernet. If that
+ happens, you can try the following steps to make network work:
+ MPC8560ADS>tftp 1000000 pImage
+ (if it hangs, use Ctrl-C to quit)
+ MPC8560ADS>nm fdf24524
+ >0
+ >1
+ >. (to quit this memory operation)
+ MPC8560ADS>tftp 1000000 pImage
+
+5. Screen dump:
+5.1 MPC8540ADS board
+U-Boot 1.0.0-pre (Oct 15 2003 - 13:40:33)
+
+Motorola PowerPC ProcessorID=00000000 Rev. PVR=80200010
+Board: Motorola MPC8540ADS Board
+ CPU: 792 MHz
+ CCB: 264 MHz
+ DDR: 132 MHz
+ LBC: 66 MHz
+L1 D-cache 32KB, L1 I-cache 32KB enabled.
+I2C: ready
+DRAM: DDR module detected, total size:128MB.
+128 MB
+FLASH: 16 MB
+L2 cache enabled: 256KB
+*** Warning - bad CRC, using default environment
+
+In: serial
+Out: serial
+Err: serial
+Net: MOTOROLA ETHERNE
+Hit any key to stop autoboot: 0
+MPC8540ADS=> fli
+
+Bank # 1: Intel 28F640J3A (64 Mbit, 64 x 128K)
+ Size: 16 MB in 64 Sectors
+ Sector Start Addresses:
+ FF000000 FF040000 FF080000 FF0C0000 FF100000
+ FF140000 FF180000 FF1C0000 FF200000 FF240000
+ FF280000 FF2C0000 FF300000 FF340000 FF380000
+ FF3C0000 FF400000 FF440000 FF480000 FF4C0000
+ FF500000 FF540000 FF580000 FF5C0000 FF600000
+ FF640000 FF680000 FF6C0000 FF700000 FF740000
+ FF780000 FF7C0000 FF800000 FF840000 FF880000
+ FF8C0000 FF900000 FF940000 FF980000 FF9C0000
+ FFA00000 FFA40000 FFA80000 FFAC0000 FFB00000
+ FFB40000 FFB80000 FFBC0000 FFC00000 FFC40000
+ FFC80000 FFCC0000 FFD00000 FFD40000 FFD80000
+ FFDC0000 FFE00000 FFE40000 FFE80000 FFEC0000
+ FFF00000 FFF40000 FFF80000 (RO) FFFC0000 (RO)
+MPC8540ADS=> imi ff000000
+
+## Checking Image at ff000000 ...
+ Image Name: Linux-2.4.21-rc5
+ Image Type: PowerPC Linux Kernel Image (gzip compressed)
+ Data Size: 800594 Bytes = 781.8 kB
+ Load Address: 00000000
+ Entry Point: 00000000
+ Verifying Checksum ... OK
+MPC8540ADS=> bdinfo
+memstart = 0x00000000
+memsize = 0x08000000
+flashstart = 0xFF000000
+flashsize = 0x01000000
+flashoffset = 0x00000000
+sramstart = 0x00000000
+sramsize = 0x00000000
+immr_base = 0xFDF00000
+bootflags = 0x40003F80
+intfreq = 792 MHz
+busfreq = 264 MHz
+ethaddr = 00:01:AF:07:9B:8A
+eth1addr = 00:01:AF:07:9B:8B
+eth2addr = 00:01:AF:07:9B:8C
+IP addr = 10.82.0.105
+baudrate = 115200 bps
+MPC8540ADS=> printenv
+bootargs=root=/dev/nfs rw nfsroot=163.12.64.52:/localhome/r6aads/linuxppc/target ip=10.82.0.105:163.12.64.52:10.82.1.254:255.255.254.0:mpc8540ads-003:eth0:off console=ttyS0,115200
+bootcmd=bootm 0xff300000 0xff700000
+bootdelay=3
+baudrate=115200
+loads_echo=1
+ethaddr=00:01:af:07:9b:8a
+eth1addr=00:01:af:07:9b:8b
+eth2addr=00:01:af:07:9b:8c
+ipaddr=10.82.0.105
+serverip=163.12.64.52
+rootpath=/home/r6aads/mpclinux/eldk-2.0.2/ppc_82xx
+gatewayip=10.82.1.254
+netmask=255.255.254.0
+hostname=MPC8560ADS_PILOT_003
+bootfile=pImage
+stdin=serial
+stdout=serial
+stderr=serial
+
+Environment size: 560/8188 bytes
+MPC8540ADS=> bootm ff000000
+## Booting image at ff000000 ...
+ Image Name: Linux-2.4.21-rc5
+ Image Type: PowerPC Linux Kernel Image (gzip compressed)
+ Data Size: 800594 Bytes = 781.8 kB
+ Load Address: 00000000
+ Entry Point: 00000000
+ Verifying Checksum ... OK
+ Uncompressing Kernel Image ... OK
+mpc85xx_init(): exit
+id mach(): done
+MMU:enter
+Memory CAM mapping: CAM0=64Mb, CAM1=64Mb, CAM2=0Mb residual: 0Mb
+MMU:hw init
+MMU:mapin
+MMU:mapin_ram done
+MMU:setio
+MMU:exit
+Linux version 2.4.21-rc5 (@etest) (gcc version 2.95.3 20010315 (release)) #1 Wed Oct 15 09:05:42 CDT 2003
+setup_arch: enter
+setup_arch: bootmem
+mpc85xx_setup_arch
+Host Bridge Vendor ID = 1057
+Host Bridge Device ID = 3
+Host Bridge header = 0
+arch: exit
+On node 0 totalpages: 32768
+zone(0): 32768 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/nfs rw nfsroot=163.12.64.52:/localhome/r6aads/linuxppc/target ip=10.82.0.105:163.12.64.52:10.82.1.254:255.255.254.0:mpc8540ads-003:eth0:off console=ttyS0,115200
+openpic: enter
+OpenPIC Version 1.2 (1 CPUs and 44 IRQ sources) at fdf40000
+openpic: timer
+openpic: external
+openpic: spurious
+openpic: exit
+time_init: decrementer frequency = 33.000000 MHz
+Calibrating delay loop... 226.09 BogoMIPS
+Memory: 127488k available (1344k kernel code, 448k data, 248k init, 0k highmem)
+Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
+Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
+Mount cache hash table entries: 512 (order: 0, 4096 bytes)
+Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
+Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
+POSIX conformance testing by UNIFIX
+PCI: Probing PCI hardware
+
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd
+Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
+pty: 256 Unix98 ptys configured
+Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
+ttyS00 at 0xfdf04500 (irq = 90) is a 16550A
+ttyS01 at 0xfdf04600 (irq = 0) is a 16550A
+eth0: Three Speed Ethernet Controller Version 0.2, 00:01:af:07:9b:8a:
+eth1: Three Speed Ethernet Controller Version 0.2, 00:01:af:07:9b:8b:
+RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize
+loop: loaded (max 8 devices)
+Intel(R) PRO/1000 Network Driver - version 5.0.43-k1
+Copyright (c) 1999-2003 Intel Corporation.
+PPP generic driver version 2.4.2
+PPP Deflate Compression module registered
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP, IGMP
+IP: routing cache hash table of 1024 buckets, 8Kbytes
+TCP: Hash tables configured (established 8192 bind 8192)
+IP-Config: Complete:
+ device=eth0, addr=10.82.0.105, mask=255.255.254.0, gw=10.82.1.254,
+ host=mpc8540ads-003, domain=, nis-domain=(none),
+ bootserver=163.12.64.52, rootserver=163.12.64.52, rootpath=
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+Looking up port of RPC 100003/2 on 163.12.64.52
+Looking up port of RPC 100005/1 on 163.12.64.52
+VFS: Mounted root (nfs filesystem).
+Freeing unused kernel memory: 248k init
+INIT: version 2.78 booting
+Activating swap...
+Checking all file systems...
+Parallelizing fsck version 1.22 (22-Jun-2001)
+Mounting local filesystems...
+nothing was mounted
+Cleaning: /etc/network/ifstate.
+Setting up IP spoofing protection: rp_filter.
+Disable TCP/IP Explicit Congestion Notification: done.
+Configuring network interfaces: done.
+Starting portmap daemon: portmap.
+Cleaning: /tmp /var/lock /var/run.
+INIT: Entering runlevel: 2
+Starting system log daemon: syslogd klogd.
+Starting internet superserver: inetd.
+
+mpc8540ads-003 login: root
+Last login: Thu Jan 1 00:00:07 1970 on console
+Linux mpc8540ads-003 2.4.21-rc5 #1 Wed Oct 15 09:05:42 CDT 2003 ppc unknown
+
+root@mpc8540ads-003:~# ls
+21142.o aa e100.o hello.o mii.o timer.o
+root@mpc8540ads-003:~# /sbin/ifconfig
+eth0 Link encap:Ethernet HWaddr 00:01:AF:07:9B:8A
+ inet addr:10.82.0.105 Bcast:10.82.1.255 Mask:255.255.254.0
+ UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
+ RX packets:4576 errors:0 dropped:0 overruns:0 frame:0
+ TX packets:2587 errors:0 dropped:0 overruns:0 carrier:0
+ collisions:0 txqueuelen:100
+ RX bytes:4457023 (4.2 Mb) TX bytes:437770 (427.5 Kb)
+ Base address:0x4000
+
+lo Link encap:Local Loopback
+ inet addr:127.0.0.1 Mask:255.0.0.0
+ UP LOOPBACK RUNNING MTU:16436 Metric:1
+ RX packets:4 errors:0 dropped:0 overruns:0 frame:0
+ TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
+ collisions:0 txqueuelen:0
+ RX bytes:296 (296.0 b) TX bytes:296 (296.0 b)
+
+root@mpc8540ads-003:~# ping 163.12.64.52
+PING 163.12.64.52 (163.12.64.52): 56 data bytes
+64 bytes from 163.12.64.52: icmp_seq=0 ttl=63 time=0.2 ms
+64 bytes from 163.12.64.52: icmp_seq=1 ttl=63 time=0.1 ms
+64 bytes from 163.12.64.52: icmp_seq=2 ttl=63 time=0.1 ms
+
+--- 163.12.64.52 ping statistics ---
+3 packets transmitted, 3 packets received, 0% packet loss
+round-trip min/avg/max = 0.1/0.1/0.2 ms
+root@mpc8540ads-003:~#
+
+5.2 MPC8560ADS board
+U-Boot 1.0.0-pre (Oct 15 2003 - 13:42:04)
+
+Motorola PowerPC ProcessorID=00000000 Rev. PVR=80200010
+Board: Motorola MPC8560ADS Board
+ CPU: 792 MHz
+ CCB: 264 MHz
+ DDR: 132 MHz
+ LBC: 66 MHz
+ CPM: 264 Mhz
+L1 D-cache 32KB, L1 I-cache 32KB enabled.
+I2C: ready
+DRAM: DDR module detected, total size:128MB.
+128 MB
+FLASH: 16 MB
+L2 cache enabled: 256KB
+*** Warning - bad CRC, using default environment
+
+In: serial
+Out: serial
+Err: serial
+Net: MOTOROLA ETHERNE
+Hit any key to stop autoboot: 3
+MPC8560ADS=> bdinfo
+memstart = 0x00000000
+memsize = 0x08000000
+flashstart = 0xFF000000
+flashsize = 0x01000000
+flashoffset = 0x00000000
+sramstart = 0x00000000
+sramsize = 0x00000000
+immr_base = 0xFDF00000
+bootflags = 0x00000000
+vco = 528 MHz
+sccfreq = 132 MHz
+brgfreq = 132 MHz
+intfreq = 792 MHz
+cpmfreq = 264 MHz
+busfreq = 264 MHz
+ethaddr = 00:01:AF:07:9B:8A
+eth1addr = 00:01:AF:07:9B:8B
+eth2addr = 00:01:AF:07:9B:8C
+IP addr = 10.82.0.105
+baudrate = 115200 bps
+MPC8560ADS=> printenv
+bootargs=root=/dev/nfs rw nfsroot=163.12.64.52:/localhome/r6aads/linuxppc/target ip=10.82.0.105:163.12.64.52:10.82.1.254:255.255.254.0:mpc8560ads-003:eth0:off console=ttyS0,115200
+bootcmd=bootm 0xff400000 0xff700000
+bootdelay=3
+baudrate=115200
+loads_echo=1
+ethaddr=00:01:af:07:9b:8a
+eth1addr=00:01:af:07:9b:8b
+eth2addr=00:01:af:07:9b:8c
+ipaddr=10.82.0.105
+serverip=163.12.64.52
+rootpath=/home/r6aads/mpclinux/eldk-2.0.2/ppc_82xx
+gatewayip=10.82.1.254
+netmask=255.255.254.0
+hostname=MPC8560ADS_PILOT_003
+bootfile=pImage
+stdin=serial
+stdout=serial
+stderr=serial
+
+Environment size: 560/8188 bytes
+MPC8560ADS=> fli
+
+Bank # 1: Intel 28F640J3A (64 Mbit, 64 x 128K)
+ Size: 16 MB in 64 Sectors
+ Sector Start Addresses:
+ FF000000 FF040000 FF080000 FF0C0000 FF100000
+ FF140000 FF180000 FF1C0000 FF200000 FF240000
+ FF280000 FF2C0000 FF300000 FF340000 FF380000
+ FF3C0000 FF400000 FF440000 FF480000 FF4C0000
+ FF500000 FF540000 FF580000 FF5C0000 FF600000
+ FF640000 FF680000 FF6C0000 FF700000 FF740000
+ FF780000 FF7C0000 FF800000 FF840000 FF880000
+ FF8C0000 FF900000 FF940000 FF980000 FF9C0000
+ FFA00000 FFA40000 FFA80000 FFAC0000 FFB00000
+ FFB40000 FFB80000 FFBC0000 FFC00000 FFC40000
+ FFC80000 FFCC0000 FFD00000 FFD40000 FFD80000
+ FFDC0000 FFE00000 FFE40000 FFE80000 FFEC0000
+ FFF00000 FFF40000 FFF80000 (RO) FFFC0000 (RO)
+MPC8560ADS=> imi ff100000
+
+## Checking Image at ff100000 ...
+ Image Name: Linux-2.4.21-rc5
+ Image Type: PowerPC Linux Kernel Image (gzip compressed)
+ Data Size: 755361 Bytes = 737.7 kB
+ Load Address: 00000000
+ Entry Point: 00000000
+ Verifying Checksum ... OK
+MPC8560ADS=> tftp 1000000 pImage.dracom.public
+TFTP from server 163.12.64.52; our IP address is 10.82.0.105; sending through gateway 10.82.1.254
+Filename 'pImage.dracom.public'.
+Load address: 0x1000000
+Loading: *#################################################################
+ #################################################################
+ ##################
+done
+Bytes transferred = 755425 (b86e1 hex)
+MPC8560ADS=> bootm ff100000
+## Booting image at ff100000 ...
+ Image Name: Linux-2.4.21-rc5
+ Image Type: PowerPC Linux Kernel Image (gzip compressed)
+ Data Size: 755361 Bytes = 737.7 kB
+ Load Address: 00000000
+ Entry Point: 00000000
+ Verifying Checksum ... OK
+ Uncompressing Kernel Image ... OK
+mpc85xx_init(): exit
+id mach(): done
+MMU:enter
+Memory CAM mapping: CAM0=64Mb, CAM1=64Mb, CAM2=0Mb residual: 0Mb
+MMU:hw init
+MMU:mapin
+MMU:mapin_ram done
+MMU:setio
+MMU:exit
+Linux version 2.4.21-rc5 (@etest) (gcc version 2.95.3 20010315 (release)) #2 Wed Oct 15 09:13:46 CDT 2003
+setup_arch: enter
+setup_arch: bootmem
+mpc85xx_setup_arch
+Host Bridge Vendor ID = 1057
+Host Bridge Device ID = 3
+Host Bridge header = 0
+arch: exit
+On node 0 totalpages: 32768
+zone(0): 32768 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/nfs rw nfsroot=163.12.64.52:/localhome/r6aads/linuxppc/target ip=10.82.0.105:163.12.64.52:10.82.1.254:255.255.254.0:mpc8560ads-003:eth0:off console=ttyS0,115200
+openpic: enter
+OpenPIC Version 1.2 (1 CPUs and 44 IRQ sources) at fdf40000
+openpic: timer
+openpic: external
+openpic: spurious
+openpic: exit
+time_init: decrementer frequency = 33.000000 MHz
+Calibrating delay loop... 226.09 BogoMIPS
+Memory: 127624k available (1276k kernel code, 384k data, 236k init, 0k highmem)
+Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
+Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
+Mount cache hash table entries: 512 (order: 0, 4096 bytes)
+Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
+Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
+POSIX conformance testing by UNIFIX
+PCI: Probing PCI hardware
+
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd
+Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
+CPM UART driver version 0.01
+ttyS0 on SCC1 at 0x8000, BRG1
+UART interrupt installed(40)
+pty: 256 Unix98 ptys configured
+eth0: Three Speed Ethernet Controller Version 0.2, 00:01:af:07:9b:8a:
+eth1: Three Speed Ethernet Controller Version 0.2, 00:01:af:07:9b:8b:
+RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize
+loop: loaded (max 8 devices)
+Intel(R) PRO/1000 Network Driver - version 5.0.43-k1
+Copyright (c) 1999-2003 Intel Corporation.
+PPP generic driver version 2.4.2
+PPP Deflate Compression module registered
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP, IGMP
+IP: routing cache hash table of 1024 buckets, 8Kbytes
+TCP: Hash tables configured (established 8192 bind 8192)
+IP-Config: Complete:
+ device=eth0, addr=10.82.0.105, mask=255.255.254.0, gw=10.82.1.254,
+ host=mpc8560ads-003, domain=, nis-domain=(none),
+ bootserver=163.12.64.52, rootserver=163.12.64.52, rootpath=
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+Looking up port of RPC 100003/2 on 163.12.64.52
+Looking up port of RPC 100005/1 on 163.12.64.52
+VFS: Mounted root (nfs filesystem).
+Freeing unused kernel memory: 236k init
+INIT: version 2.78 booting
+Activating swap...
+Checking all file systems...
+Parallelizing fsck version 1.22 (22-Jun-2001)
+Mounting local filesystems...
+nothing was mounted
+Cleaning: /etc/network/ifstate.
+Setting up IP spoofing protection: FAILED
+Configuring network interfaces: done.
+Starting portmap daemon: portmap.
+Cleaning: /tmp /var/lock /var/run.
+INIT: Entering runlevel: 2
+Starting system log daemon: syslogd klogd.
+Starting internet superserver: inetd.
+
+mpc8560ads-003 login: root
+Last login: Thu Jan 1 00:00:05 1970 on console
+Linux mpc8560ads-003 2.4.21-rc5 #2 Wed Oct 15 09:13:46 CDT 2003 ppc unknown
+
+root@mpc8560ads-003:~# ls
+21142.o aa e100.o hello.o mii.o timer.o
+root@mpc8560ads-003:~# cd /
+root@mpc8560ads-003:/# ls
+bin boot dev etc home lib mnt opt proc root sbin tmp usr var
+root@mpc8560ads-003:/# /sbin/ifconfig
+eth0 Link encap:Ethernet HWaddr 00:01:AF:07:9B:8A
+ inet addr:10.82.0.105 Bcast:10.82.1.255 Mask:255.255.254.0
+ UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
+ RX packets:4608 errors:0 dropped:0 overruns:0 frame:0
+ TX packets:2610 errors:0 dropped:0 overruns:0 carrier:0
+ collisions:0 txqueuelen:100
+ RX bytes:4465943 (4.2 Mb) TX bytes:440944 (430.6 Kb)
+ Base address:0x4000
+
+lo Link encap:Local Loopback
+ inet addr:127.0.0.1 Mask:255.0.0.0
+ UP LOOPBACK RUNNING MTU:16436 Metric:1
+ RX packets:4 errors:0 dropped:0 overruns:0 frame:0
+ TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
+ collisions:0 txqueuelen:0
+ RX bytes:296 (296.0 b) TX bytes:296 (296.0 b)
+
+root@mpc8560ads-003:/# ping 163.12.64.52
+PING 163.12.64.52 (163.12.64.52): 56 data bytes
+64 bytes from 163.12.64.52: icmp_seq=0 ttl=63 time=0.1 ms
+64 bytes from 163.12.64.52: icmp_seq=1 ttl=63 time=0.1 ms
+64 bytes from 163.12.64.52: icmp_seq=2 ttl=63 time=0.1 ms
+
+--- 163.12.64.52 ping statistics ---
+3 packets transmitted, 3 packets received, 0% packet loss
+round-trip min/avg/max = 0.1/0.1/0.1 ms
+root@mpc8560ads-003:/#
diff --git a/doc/README.nios b/doc/README.nios
index 2cee723347..d7e87d5751 100644
--- a/doc/README.nios
+++ b/doc/README.nios
@@ -44,7 +44,6 @@ The Nios port also does not use the long-winded peripheral
structure definitions from the Nios SDK.
-
2. CONFIGURATION OPTIONS/SETTINGS
----------------------------------
@@ -189,7 +188,6 @@ for those interested in contributing:
MSTEP and MUL instructions (e.g. CFG_NIOS_MULT_HW and CFG_NIOS_MULT_MSTEP).
-
Regards,
--Scott