summaryrefslogtreecommitdiff
path: root/doc/README.nios
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-01-03 19:43:48 +0000
committerwdenk <wdenk>2004-01-03 19:43:48 +0000
commitc935d3bd8b1c7f681ad58e64bd0548e1b26a7d2f (patch)
tree2529369b185098e6d38627b7500d7450d9bab8f5 /doc/README.nios
parent3a473b2a6523db9cdf2b5aed22d9730b4ebc5693 (diff)
Patches by Stephan Linz, 11 Dec 2003:
- more documentation for NIOS port - new struct nios_pio_t, struct nios_spi_t - Reconfiguration for NIOS Development Kit DK1C20: o move board related code from board/dk1c20 to board/altera/dk1c20 o create a new common source path board/altera/common and move generic flash access stuff into it o change/expand configuration file DK1C20.h - Add support for NIOS Development Kit DK1S10 - Add status LED support for NIOS systems - Add dual 7-segment LED support for Altera NIOS DevKits
Diffstat (limited to 'doc/README.nios')
-rw-r--r--doc/README.nios98
1 files changed, 82 insertions, 16 deletions
diff --git a/doc/README.nios b/doc/README.nios
index aee0ecdc27..8765df7391 100644
--- a/doc/README.nios
+++ b/doc/README.nios
@@ -1,12 +1,27 @@
U-Boot for Nios-32
- Last Update: October 15, 2003
+ Last Update: November 30, 2003
====================================================================
This file contains information regarding U-Boot and the Altera
Nios CPU. For information regarding U-Boot and the Nios Development
-Kit, Cyclone Edition (DK-1C20), see doc/README.dk1c20.
+Kits see:
+
+ * Cyclone Edition (DK-1C20), see doc/README.dk1c20
+ * Stratix Edition (DK-1S10), see doc/README.dk1s10 (TODO)
+ * Stratix Edition (DK-1S40), see doc/README.dk1s40 (TODO)
+ * Stratix Edition (DK-20K200), see doc/README.dk20k200 (TODO)
+
+For informations regarding Nios Development Kit hardware overview
+and the NIOS CPU standard configuration of all known boards made by
+Altera see:
+
+ * Development Kit (DK) hardware overview, see doc/README.nios_DK
+ * NIOS CPU standard_32 at DK-1C20, see doc/README.dk1c20_std32
+ * NIOS CPU standard_32 at DK-1S10, see doc/README.dk1s10_std32
+ * NIOS CPU standard_32 at DK-1S40, see doc/README.dk1s40_std32
+ * NIOS CPU standard_32 at DK-20K200, see doc/README.dk20k200_std32
For those interested in contributing ... see HELP WANTED below.
@@ -50,16 +65,25 @@ structure definitions from the Nios SDK.
2.1 Nios-specific Options/Settings
-----------------------------------
All configuration options/settings that are specific to Nios begin
-with "CONFIG_NIOS_" or "CFG_NIOS_". The following is a list of
-currently defined Nios-specific options/parameters. If any options
-are related to Standard-32 Nios SDK excalibur.h definitions, the
-related definition follows the description).
+with "CONFIG_NIOS_", "CFG_NIOS_", or "CFG_NIOS_CPU_".
+
+The configuration follows a two-stage process. In the first stage
+the NIOS CPU core will defined like defined in Alteras SOPC Builder.
+At this point we use the "CFG_NIOS_CPU_" defines exclusively. For
+more informations about all the definitions you have to setup see
+into current board configurations and doc/README.nios_CFG_NIOS_CPU.
+In second stage we bring the NIOS CPU configuration in relation to
+U-Boot configuration options/settings. The following is a list of
+currently defined Nios-specific options/parameters used inside of
+U-Boot. If any options are related to Standard-32 Nios SDK
+excalibur.h definitions, the related definition follows the
+description).
CONFIG_NIOS -- defined for all Nios-32 boards.
CFG_NIOS_CONSOLE -- the base address of the console UART.
- (standard-32: na_uart1_base).
+ (standard-32: nasys_uart_0 resp. na_uart1_base).
CFG_NIOS_FIXEDBAUD -- defined if the console UART PTF fixed_baud
parameter is set to '1'.
@@ -71,10 +95,11 @@ CFG_NIOS_MULT_MSTEP -- use hardware assisted multiply using the
CFG_NIOS_TMRBASE -- the base address of the timer used to support
xxx_timer routines (e.g. set_timer(), get_timer(), etc.).
- (standard-32: na_lo_priority_timer2_base).
+ (standard-32: nasys_timer_1 resp. na_lo_priority_timer2_base).
CFG_NIOS_TMRIRQ -- the interrupt request (vector number) assigned to
- the timer. (standard-32: na_low_priority_timer2_irq).
+ the timer. (standard-32: nasys_timer_1_irq resp.
+ na_low_priority_timer2_irq).
CFG_NIOS_TMRMS -- the period of the timer in milliseconds.
@@ -105,20 +130,56 @@ is an alias for 'subi %rB,1' that is supported by the assembler
but does not appear in the programmer's manual.
-4. BRAIN DAMAGE
+4. BOOT PROCESS
+---------------
+
+4.1 Boot process over GERMS
+---------------------------
+When the NIOS CPU catch a reset signal it will begin to be running
+code from CFG_NIOS_CPU_RST_VECT. Normally at this place it will
+find the GERMS monitor. That's the case for the generic NIOS CPU
+configuration "standard_32". When the GERMS monitor starts running,
+it performs important system initializations and then looks for
+executable code in flash, using the following steps:
+
+ 1. Examining the two bytes at CFG_NIOS_CPU_FLASH_BASE + 0x04000C.
+ 2. Examining the button 0 on the PIO CFG_NIOS_CPU_BUTTON_PIO.
+ 3. If the button is not pressed and the two bytes contain 'N'
+ and 'i', the monitor executes a CALL to location
+ CFG_NIOS_CPU_FLASH_BASE + 0x040000.
+ 4. If the code is not executed in step 3 or the code returns,
+ then prints an 8-digit version number to STDOUT and waits for
+ user commands from STDIN.
+
+In normal case, for "standard_32", STDIN and STDOUT are the first
+serial port.
+
+4.2 Return to GERMS command line
+--------------------------------
+During the boot process, the GERMS monitor checks for the existence
+of application software in flash memory. If found, the processor
+immediately executes the code. To return program execution to the
+GERMS monitor (that is, avoid running code stored in flash memory):
+
+ 1. Hold down CFG_NIOS_CPU_BUTTON_PIO, button number 0.
+ 2. Press then release the CPU reset button.
+ 3. Release CFG_NIOS_CPU_BUTTON_PIO, button number 0.
+
+
+5. BRAIN DAMAGE
----------------
This section describes some of the unfortunate and avoidable aspects
of working with the Nios CPU ... and some things you can do to
reduce your pain.
-4.1 GERMS doesn't work with Hyperterminal
+5.1 GERMS doesn't work with Hyperterminal
------------------------------------------
GERMS doesn't do CR/LF mapping that is compatible with Hyperterminal
(or minicom) -- geez. Regardless of you opion of Hyperterminal, this
sad design decision is remedied by using U-Boot.
-4.2 cygwin Incompatibility
+5.2 cygwin Incompatibility
---------------------------
The version of cygwin distributed with the nios GNUPro toolchain is
out-of-date and incompatible with the latest cygwin distributions.
@@ -131,7 +192,7 @@ topic).
The solution ... well, you can wait for Altera ... or build as
set of tools for linux.
-4.3 No native gcc
+5.3 No native gcc
------------------
I'm not sure how this one slipped through the cracks ... but it is
a real pain. Basically, if you want to build anything for the native
@@ -140,9 +201,11 @@ and the old version of cygwin makes locating one challenging.
The solution ... same as above. Just download the gcc source from
Altera and build up a set of cross tools for your favorite linux
-distro.
+distro. Anybody who wants to use an already precompiled NIOS cross
+toolchain can it found in the CDK4NIOS project hosted by Source
+Forge at http://cdk4nios.sourceforge.net.
-4.4 Can't build default U-Boot
+5.4 Can't build default U-Boot
-------------------------------
By default, when you build U-Boot you will be building some native
tools along with the target elf, bin, and srec files. Without a
@@ -167,7 +230,7 @@ environment.o: environment.c ../tools/envcrc
BTW, thats a 'zero' ... not the letter 'O'.
-5. HELP WANTED
+6. HELP WANTED
---------------
There are plenty of areas where help is needed. Here's are some ideas
@@ -190,3 +253,6 @@ Regards,
--Scott
<smcnutt@psyent.com>
+
+--Stephan
+<linz@li-pro.net>