summaryrefslogtreecommitdiff
path: root/common/cmd_mem.c
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2009-05-24 17:06:54 +0200
committerWolfgang Denk <wd@denx.de>2009-06-12 20:47:16 +0200
commita89c33db96a1e55319a286dd4c3c05ca64ac6bfd (patch)
tree512938dbd159b7262aad30e4304cfc05c350226c /common/cmd_mem.c
parent94796d8544d4248028141bad11c6a74b840e9d6e (diff)
General help message cleanup
Many of the help messages were not really helpful; for example, many commands that take no arguments would not print a correct synopsis line, but "No additional help available." which is not exactly wrong, but not helpful either. Commit ``Make "usage" messages more helpful.'' changed this partially. But it also became clear that lots of "Usage" and "Help" messages (fields "usage" and "help" in struct cmd_tbl_s respective) were actually redundant. This patch cleans this up - for example: Before: => help dtt dtt - Digital Thermometer and Thermostat Usage: dtt - Read temperature from digital thermometer and thermostat. After: => help dtt dtt - Read temperature from Digital Thermometer and Thermostat Usage: dtt Signed-off-by: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'common/cmd_mem.c')
-rw-r--r--common/cmd_mem.c37
1 files changed, 17 insertions, 20 deletions
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index 2d4fc2a419..cdf8c798dd 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -1172,39 +1172,39 @@ int do_unzip ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
md, 3, 1, do_mem_md,
"memory display",
- "[.b, .w, .l] address [# of objects]\n - memory display\n"
+ "[.b, .w, .l] address [# of objects]"
);
U_BOOT_CMD(
mm, 2, 1, do_mem_mm,
- "memory modify (auto-incrementing)",
- "[.b, .w, .l] address\n" " - memory modify, auto increment address\n"
+ "memory modify (auto-incrementing address)",
+ "[.b, .w, .l] address"
);
U_BOOT_CMD(
nm, 2, 1, do_mem_nm,
"memory modify (constant address)",
- "[.b, .w, .l] address\n - memory modify, read and keep address\n"
+ "[.b, .w, .l] address"
);
U_BOOT_CMD(
mw, 4, 1, do_mem_mw,
"memory write (fill)",
- "[.b, .w, .l] address value [count]\n - write memory\n"
+ "[.b, .w, .l] address value [count]"
);
U_BOOT_CMD(
cp, 4, 1, do_mem_cp,
"memory copy",
- "[.b, .w, .l] source target count\n - copy memory\n"
+ "[.b, .w, .l] source target count"
);
U_BOOT_CMD(
cmp, 4, 1, do_mem_cmp,
"memory compare",
- "[.b, .w, .l] addr1 addr2 count\n - compare memory\n"
+ "[.b, .w, .l] addr1 addr2 count"
);
#ifndef CONFIG_CRC32_VERIFY
@@ -1212,7 +1212,7 @@ U_BOOT_CMD(
U_BOOT_CMD(
crc32, 4, 1, do_mem_crc,
"checksum calculation",
- "address count [addr]\n - compute CRC32 checksum [save at addr]\n"
+ "address count [addr]\n - compute CRC32 checksum [save at addr]"
);
#else /* CONFIG_CRC32_VERIFY */
@@ -1221,7 +1221,7 @@ U_BOOT_CMD(
crc32, 5, 1, do_mem_crc,
"checksum calculation",
"address count [addr]\n - compute CRC32 checksum [save at addr]\n"
- "-v address count crc\n - verify crc of memory area\n"
+ "-v address count crc\n - verify crc of memory area"
);
#endif /* CONFIG_CRC32_VERIFY */
@@ -1230,43 +1230,40 @@ U_BOOT_CMD(
base, 2, 1, do_mem_base,
"print or set address offset",
"\n - print address offset for memory commands\n"
- "base off\n - set address offset for memory commands to 'off'\n"
+ "base off\n - set address offset for memory commands to 'off'"
);
U_BOOT_CMD(
loop, 3, 1, do_mem_loop,
"infinite loop on address range",
- "[.b, .w, .l] address number_of_objects\n"
- " - loop on a set of addresses\n"
+ "[.b, .w, .l] address number_of_objects"
);
#ifdef CONFIG_LOOPW
U_BOOT_CMD(
loopw, 4, 1, do_mem_loopw,
"infinite write loop on address range",
- "[.b, .w, .l] address number_of_objects data_to_write\n"
- " - loop on a set of addresses\n"
+ "[.b, .w, .l] address number_of_objects data_to_write"
);
#endif /* CONFIG_LOOPW */
U_BOOT_CMD(
mtest, 5, 1, do_mem_mtest,
- "simple RAM test",
- "[start [end [pattern [iterations]]]]\n"
- " - simple RAM read/write test\n"
+ "simple RAM read/write test",
+ "[start [end [pattern [iterations]]]]"
);
#ifdef CONFIG_MX_CYCLIC
U_BOOT_CMD(
mdc, 4, 1, do_mem_mdc,
"memory display cyclic",
- "[.b, .w, .l] address count delay(ms)\n - memory display cyclic\n"
+ "[.b, .w, .l] address count delay(ms)"
);
U_BOOT_CMD(
mwc, 4, 1, do_mem_mwc,
"memory write cyclic",
- "[.b, .w, .l] address value delay(ms)\n - memory write cyclic\n"
+ "[.b, .w, .l] address value delay(ms)"
);
#endif /* CONFIG_MX_CYCLIC */
@@ -1274,6 +1271,6 @@ U_BOOT_CMD(
U_BOOT_CMD(
unzip, 4, 1, do_unzip,
"unzip a memory region",
- "srcaddr dstaddr [dstsize]\n"
+ "srcaddr dstaddr [dstsize]"
);
#endif /* CONFIG_CMD_UNZIP */