diff options
| author | Alexandre Courbot <acourbot@nvidia.com> | 2015-07-09 16:33:01 +0900 |
|---|---|---|
| committer | Tom Warren <twarren@nvidia.com> | 2015-08-06 10:50:03 -0700 |
| commit | a38a3c4af4ed72a2ed6192203f8fe17ccdd2389f (patch) | |
| tree | 71a0a327f8ca6b0bf1798aa08ec3e26659d11157 /board/nvidia/jetson-tk1 | |
| parent | 871d78ed1b906a79d8a6dad96a9f83dea7b9170f (diff) | |
ARM: tegra: enable GPU DT node when appropriate
T124/210 requires some specific configuration (VPR setup) to
be performed by the bootloader before the GPU can be used.
For this reason, the GPU node in the device tree is disabled
by default. This patch enables the node if U-boot has performed
VPR configuration.
Boards enabled by this patch are T124's Jetson TK1 and Venice2
and T210's P2571.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Tom Warren <twarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Diffstat (limited to 'board/nvidia/jetson-tk1')
| -rw-r--r-- | board/nvidia/jetson-tk1/jetson-tk1.c | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/board/nvidia/jetson-tk1/jetson-tk1.c b/board/nvidia/jetson-tk1/jetson-tk1.c index 52425a8f6d..3c21767ce4 100644 --- a/board/nvidia/jetson-tk1/jetson-tk1.c +++ b/board/nvidia/jetson-tk1/jetson-tk1.c @@ -11,6 +11,7 @@ #include <asm/arch/gpio.h> #include <asm/arch/pinmux.h> +#include <asm/arch-tegra/gpu.h> #include "pinmux-config-jetson-tk1.h" @@ -79,3 +80,10 @@ int board_eth_init(bd_t *bis) return pci_eth_init(bis); } #endif /* PCI */ + +int ft_board_setup(void *blob, bd_t *bd) +{ + gpu_enable_node(blob, "/gpu@0,57000000"); + + return 0; +} |