powerpc/T4240EMU: Add T4240EMU target

Add emulator support for T4240. Emulator has limited peripherals and
interfaces. Difference between emulator and T4240QDS includes:
	ECC for DDR is disabled due the procedure to load images
	No board FPGA (QIXIS)
	NOR flash has 32-bit port for higher loading speed
	IFC and I2C timing don't really matter, so set them fast
	No ethernet

Signed-off-by: York Sun <yorksun@freescale.com>

7 files changed, 274 insertions, 105 deletions

diff --git a/board/freescale/t4qds/Makefile b/board/freescale/t4qds/Makefile
index 85df066906..a2167b377b 100644
--- a/board/freescale/t4qds/Makefile
+++ b/board/freescale/t4qds/Makefile
@@ -8,7 +8,8 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS-y	+= $(BOARD).o
+COBJS-$(CONFIG_T4240QDS) += t4240qds.o
+COBJS-$(CONFIG_T4240EMU) += t4240emu.o
 COBJS-y	+= ddr.o
 COBJS-$(CONFIG_T4240QDS)+= eth.o
 COBJS-$(CONFIG_PCI)	+= pci.o
diff --git a/board/freescale/t4qds/ddr.c b/board/freescale/t4qds/ddr.c
index 058d62511f..26ac2a54d2 100644
--- a/board/freescale/t4qds/ddr.c
+++ b/board/freescale/t4qds/ddr.c
@@ -13,81 +13,10 @@
 #include <asm/fsl_ddr_sdram.h>
 #include <asm/fsl_ddr_dimm_params.h>
 #include <asm/fsl_law.h>
+#include "ddr.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
-struct board_specific_parameters {
-	u32 n_ranks;
-	u32 datarate_mhz_high;
-	u32 rank_gb;
-	u32 clk_adjust;
-	u32 wrlvl_start;
-	u32 wrlvl_ctl_2;
-	u32 wrlvl_ctl_3;
-	u32 cpo;
-	u32 write_data_delay;
-	u32 force_2T;
-};
-
-/*
- * This table contains all valid speeds we want to override with board
- * specific parameters. datarate_mhz_high values need to be in ascending order
- * for each n_ranks group.
- */
-static const struct board_specific_parameters udimm0[] = {
-	/*
-	 * memory controller 0
-	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
-	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
-	 */
-	{2,  1350, 4, 4,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
-	{2,  1350, 0, 5,     7, 0x0709090b, 0x0c0c0d09,   0xff,    2,  0},
-	{2,  1666, 4, 4,     8, 0x080a0a0d, 0x0d10100b,   0xff,    2,  0},
-	{2,  1666, 0, 5,     7, 0x080a0a0c, 0x0d0d0e0a,   0xff,    2,  0},
-	{2,  1900, 0, 4,     8, 0x090a0b0e, 0x0f11120c,   0xff,    2,  0},
-	{2,  2140, 0, 4,     8, 0x090a0b0e, 0x0f11120c,   0xff,    2,  0},
-	{1,  1350, 0, 5,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
-	{1,  1700, 0, 5,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
-	{1,  1900, 0, 4,     8, 0x080a0a0c, 0x0e0e0f0a,   0xff,    2,  0},
-	{1,  2140, 0, 4,     8, 0x090a0b0c, 0x0e0f100b,   0xff,    2,  0},
-	{}
-};
-
-/*
- * The three slots have slightly different timing. The center values are good
- * for all slots. We use identical speed tables for them. In future use, if
- * DIMMs require separated tables, make more entries as needed.
- */
-static const struct board_specific_parameters *udimms[] = {
-	udimm0,
-};
-
-static const struct board_specific_parameters rdimm0[] = {
-	/*
-	 * memory controller 0
-	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
-	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
-	 */
-	{4,  1350, 0, 5,     9, 0x08070605, 0x07080805,   0xff,    2,  0},
-	{4,  1666, 0, 5,     8, 0x08070605, 0x07080805,   0xff,    2,  0},
-	{4,  2140, 0, 5,     8, 0x08070605, 0x07081805,   0xff,    2,  0},
-	{2,  1350, 0, 5,     7, 0x0809090b, 0x0c0c0d09,   0xff,    2,  0},
-	{2,  1666, 0, 5,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
-	{2,  2140, 0, 5,     8, 0x090a0b0c, 0x0e0f100b,   0xff,    2,  0},
-	{1,  1350, 0, 5,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
-	{1,  1700, 0, 5,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
-	{1,  1900, 0, 4,     8, 0x080a0a0c, 0x0e0e0f0a,   0xff,    2,  0},
-	{1,  2140, 0, 4,     8, 0x090a0b0c, 0x0e0f100b,   0xff,    2,  0},
-	{}
-};
-
-/*
- * The three slots have slightly different timing. See comments above.
- */
-static const struct board_specific_parameters *rdimms[] = {
-	rdimm0,
-};
-
 void fsl_ddr_board_options(memctl_options_t *popts,
 				dimm_params_t *pdimm,
 				unsigned int ctrl_num)
diff --git a/board/freescale/t4qds/ddr.h b/board/freescale/t4qds/ddr.h
new file mode 100644
index 0000000000..cde0785934
--- /dev/null
+++ b/board/freescale/t4qds/ddr.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __DDR_H__
+#define __DDR_H__
+struct board_specific_parameters {
+	u32 n_ranks;
+	u32 datarate_mhz_high;
+	u32 rank_gb;
+	u32 clk_adjust;
+	u32 wrlvl_start;
+	u32 wrlvl_ctl_2;
+	u32 wrlvl_ctl_3;
+	u32 cpo;
+	u32 write_data_delay;
+	u32 force_2T;
+};
+
+/*
+ * These tables contain all valid speeds we want to override with board
+ * specific parameters. datarate_mhz_high values need to be in ascending order
+ * for each n_ranks group.
+ */
+
+#ifdef CONFIG_T4240QDS
+static const struct board_specific_parameters udimm0[] = {
+	/*
+	 * memory controller 0
+	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
+	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
+	 */
+	{2,  1350, 4, 4,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
+	{2,  1350, 0, 5,     7, 0x0709090b, 0x0c0c0d09,   0xff,    2,  0},
+	{2,  1666, 4, 4,     8, 0x080a0a0d, 0x0d10100b,   0xff,    2,  0},
+	{2,  1666, 0, 5,     7, 0x080a0a0c, 0x0d0d0e0a,   0xff,    2,  0},
+	{2,  1900, 0, 4,     8, 0x090a0b0e, 0x0f11120c,   0xff,    2,  0},
+	{2,  2140, 0, 4,     8, 0x090a0b0e, 0x0f11120c,   0xff,    2,  0},
+	{1,  1350, 0, 5,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
+	{1,  1700, 0, 5,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
+	{1,  1900, 0, 4,     8, 0x080a0a0c, 0x0e0e0f0a,   0xff,    2,  0},
+	{1,  2140, 0, 4,     8, 0x090a0b0c, 0x0e0f100b,   0xff,    2,  0},
+	{}
+};
+
+static const struct board_specific_parameters rdimm0[] = {
+	/*
+	 * memory controller 0
+	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
+	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
+	 */
+	{4,  1350, 0, 5,     9, 0x08070605, 0x07080805,   0xff,    2,  0},
+	{4,  1666, 0, 5,     8, 0x08070605, 0x07080805,   0xff,    2,  0},
+	{4,  2140, 0, 5,     8, 0x08070605, 0x07081805,   0xff,    2,  0},
+	{2,  1350, 0, 5,     7, 0x0809090b, 0x0c0c0d09,   0xff,    2,  0},
+	{2,  1666, 0, 5,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
+	{2,  2140, 0, 5,     8, 0x090a0b0c, 0x0e0f100b,   0xff,    2,  0},
+	{1,  1350, 0, 5,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
+	{1,  1700, 0, 5,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
+	{1,  1900, 0, 4,     8, 0x080a0a0c, 0x0e0e0f0a,   0xff,    2,  0},
+	{1,  2140, 0, 4,     8, 0x090a0b0c, 0x0e0f100b,   0xff,    2,  0},
+	{}
+};
+
+#else	/* CONFIG_T4240EMU */
+static const struct board_specific_parameters udimm0[] = {
+	/*
+	 * memory controller 0
+	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
+	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
+	 */
+	{2,  2140, 0, 4,     8, 0x0, 0x0,   0xff,    2,  0},
+	{1,  2140, 0, 4,     8, 0x0, 0x0,   0xff,    2,  0},
+	{}
+};
+
+static const struct board_specific_parameters rdimm0[] = {
+	/*
+	 * memory controller 0
+	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
+	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
+	 */
+	{4,  2140, 0, 5,     8, 0x0, 0x0,   0xff,    2,  0},
+	{2,  2140, 0, 5,     8, 0x0, 0x0,   0xff,    2,  0},
+	{1,  2140, 0, 4,     8, 0x0, 0x0,   0xff,    2,  0},
+	{}
+};
+#endif	/* CONFIG_T4240EMU */
+
+/*
+ * The three slots have slightly different timing. The center values are good
+ * for all slots. We use identical speed tables for them. In future use, if
+ * DIMMs require separated tables, make more entries as needed.
+ */
+static const struct board_specific_parameters *udimms[] = {
+	udimm0,
+};
+
+/*
+ * The three slots have slightly different timing. See comments above.
+ */
+static const struct board_specific_parameters *rdimms[] = {
+	rdimm0,
+};
+
+
+#endif
diff --git a/board/freescale/t4qds/law.c b/board/freescale/t4qds/law.c
index 63549df2aa..367783bfe4 100644
--- a/board/freescale/t4qds/law.c
+++ b/board/freescale/t4qds/law.c
@@ -19,7 +19,9 @@ struct law_entry law_table[] = {
 #ifdef CONFIG_SYS_QMAN_MEM_PHYS
 	SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
 #endif
+#ifdef QIXIS_BASE_PHYS
 	SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
+#endif
 #ifdef CONFIG_SYS_DCSRBAR_PHYS
 	/* Limit DCSR to 32M to access NPC Trace Buffer */
 	SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
diff --git a/board/freescale/t4qds/t4240emu.c b/board/freescale/t4qds/t4240emu.c
new file mode 100644
index 0000000000..589a2ae357
--- /dev/null
+++ b/board/freescale/t4qds/t4240emu.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <netdev.h>
+#include <linux/compiler.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	struct cpu_type *cpu = gd->arch.cpu;
+
+	printf("Board: %sEMU\n", cpu->name);
+
+	return 0;
+}
+
+int board_early_init_r(void)
+{
+	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+	/*
+	 * Remap Boot flash + PROMJET region to caching-inhibited
+	 * so that flash can be erased properly.
+	 */
+
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
+
+	/* invalidate existing TLB entry for flash */
+	disable_tlb(flash_esel);
+
+	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+		MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, flash_esel, BOOKE_PAGESZ_256M, 1);
+
+	set_liodns();
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	setup_portals();
+#endif
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	return 0;
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	phys_addr_t base;
+	phys_size_t size;
+
+	ft_cpu_setup(blob, bd);
+
+	base = getenv_bootm_low();
+	size = getenv_bootm_size();
+
+	fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+	fdt_fixup_liodn(blob);
+	fdt_fixup_dr_usb(blob, bd);
+}
diff --git a/board/freescale/t4qds/t4qds.c b/board/freescale/t4qds/t4240qds.c
index fe2a9982a9..89e56a3124 100644
--- a/board/freescale/t4qds/t4qds.c
+++ b/board/freescale/t4qds/t4240qds.c
@@ -1,7 +1,23 @@
 /*
  * Copyright 2009-2012 Freescale Semiconductor, Inc.
  *
- * SPDX-License-Identifier:	GPL-2.0+
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
  */
 
 #include <common.h>
@@ -47,7 +63,7 @@ int checkboard(void)
 
 	printf("Board: %sQDS, ", cpu->name);
 	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ",
-		QIXIS_READ(id), QIXIS_READ(arch));
+	       QIXIS_READ(id), QIXIS_READ(arch));
 
 	sw = QIXIS_READ(brdcfg[0]);
 	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
@@ -62,8 +78,8 @@ int checkboard(void)
 		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
 
 	printf("FPGA: v%d (%s), build %d",
-		(int)QIXIS_READ(scver), qixis_read_tag(buf),
-		(int)qixis_read_minor());
+	       (int)QIXIS_READ(scver), qixis_read_tag(buf),
+	       (int)qixis_read_minor());
 	/* the timestamp string contains "\n" at the end */
 	printf(" on %s", qixis_read_time(buf));
 
@@ -78,7 +94,7 @@ int checkboard(void)
 	puts("SERDES Reference Clocks: ");
 	sw = QIXIS_READ(brdcfg[2]);
 	for (i = 0; i < MAX_SERDES; i++) {
-		static const char *freq[] = {
+		static const char * const freq[] = {
 			"100", "125", "156.25", "161.1328125"};
 		unsigned int clock = (sw >> (6 - 2 * i)) & 3;
 
@@ -416,7 +432,7 @@ int config_backside_crossbar_mux(void)
 		break;
 	default:
 		printf("WARNING: unsupported for SerDes3 Protocol %d\n",
-				srds_prtcl_s3);
+		       srds_prtcl_s3);
 		return -1;
 	}
 
@@ -456,7 +472,7 @@ int config_backside_crossbar_mux(void)
 		break;
 	default:
 		printf("WARNING: unsupported for SerDes4 Protocol %d\n",
-				srds_prtcl_s4);
+		       srds_prtcl_s4);
 		return -1;
 	}
 
@@ -481,8 +497,8 @@ int board_early_init_r(void)
 	disable_tlb(flash_esel);
 
 	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, flash_esel, BOOKE_PAGESZ_256M, 1);
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, flash_esel, BOOKE_PAGESZ_256M, 1);
 
 	set_liodns();
 #ifdef CONFIG_SYS_DPAA_QBMAN
@@ -620,9 +636,8 @@ int misc_init_r(void)
 		u32 pllcr0 = srds_regs->bank[i].pllcr0;
 		u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
 		if (expected != actual[i]) {
-			printf("Warning: SERDES%u expects reference clock"
-			       " %sMHz, but actual is %sMHz\n", i + 1,
-			       serdes_clock_to_string(expected),
+			printf("Warning: SERDES%u expects reference clock %sMHz, but actual is %sMHz\n",
+			       i + 1, serdes_clock_to_string(expected),
 			       serdes_clock_to_string(actual[i]));
 		}
 	}
@@ -781,42 +796,44 @@ void qixis_dump_switch(void)
 	}
 
 	sw[0] = dutcfg[0];
-	sw[1] = (dutcfg[1] << 0x07)		| \
-		((dutcfg[12] & 0xC0) >> 1)	| \
-		((dutcfg[11] & 0xE0) >> 3)	| \
-		((dutcfg[6] & 0x80) >> 6)	| \
+	sw[1] = (dutcfg[1] << 0x07)		|
+		((dutcfg[12] & 0xC0) >> 1)	|
+		((dutcfg[11] & 0xE0) >> 3)	|
+		((dutcfg[6] & 0x80) >> 6)	|
 		((dutcfg[1] & 0x80) >> 7);
-	sw[2] = ((brdcfg[1] & 0x0f) << 4)	| \
-		((brdcfg[1] & 0x30) >> 2)	| \
-		((brdcfg[1] & 0x40) >> 5)	| \
+	sw[2] = ((brdcfg[1] & 0x0f) << 4)	|
+		((brdcfg[1] & 0x30) >> 2)	|
+		((brdcfg[1] & 0x40) >> 5)	|
 		((brdcfg[1] & 0x80) >> 7);
 	sw[3] = brdcfg[2];
-	sw[4] = ((dutcfg[2] & 0x01) << 7)	| \
-		((dutcfg[2] & 0x06) << 4)	| \
-		((~QIXIS_READ(present)) & 0x10)	| \
-		((brdcfg[3] & 0x80) >> 4)	| \
-		((brdcfg[3] & 0x01) << 2)	| \
-		((brdcfg[6] == 0x62) ? 3 :	\
-		((brdcfg[6] == 0x5a) ? 2 :	\
+	sw[4] = ((dutcfg[2] & 0x01) << 7)	|
+		((dutcfg[2] & 0x06) << 4)	|
+		((~QIXIS_READ(present)) & 0x10)	|
+		((brdcfg[3] & 0x80) >> 4)	|
+		((brdcfg[3] & 0x01) << 2)	|
+		((brdcfg[6] == 0x62) ? 3 :
+		((brdcfg[6] == 0x5a) ? 2 :
 		((brdcfg[6] == 0x5e) ? 1 : 0)));
-	sw[5] = ((brdcfg[0] & 0x0f) << 4)	| \
-		((QIXIS_READ(rst_ctl) & 0x30) >> 2) | \
+	sw[5] = ((brdcfg[0] & 0x0f) << 4)	|
+		((QIXIS_READ(rst_ctl) & 0x30) >> 2) |
 		((brdcfg[0] & 0x40) >> 5);
 	sw[6] = (brdcfg[11] & 0x20)		|
 		((brdcfg[5] & 0x02) << 3);
-	sw[7] = (((~QIXIS_READ(rst_ctl)) & 0x40) << 1) | \
+	sw[7] = (((~QIXIS_READ(rst_ctl)) & 0x40) << 1) |
 		((brdcfg[5] & 0x10) << 2);
-	sw[8] = ((brdcfg[12] & 0x08) << 4)	| \
+	sw[8] = ((brdcfg[12] & 0x08) << 4)	|
 		((brdcfg[12] & 0x03) << 5);
 
 	puts("DIP switch (reverse-engineering)\n");
 	for (i = 0; i < 9; i++) {
 		printf("SW%d         = 0b%s (0x%02x)\n",
-			i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]);
+		       i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]);
 	}
 }
 
-static int do_vdd_adjust(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_vdd_adjust(cmd_tbl_t *cmdtp,
+			 int flag, int argc,
+			 char * const argv[])
 {
 	ulong override;
 
diff --git a/board/freescale/t4qds/tlb.c b/board/freescale/t4qds/tlb.c
index b27356a5f7..b701e75209 100644
--- a/board/freescale/t4qds/tlb.c
+++ b/board/freescale/t4qds/tlb.c
@@ -120,9 +120,11 @@ struct fsl_e_tlb_entry tlb_table[] = {
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 			0, 16, BOOKE_PAGESZ_64K, 1),
 #endif
+#ifdef QIXIS_BASE_PHYS
 	SET_TLB_ENTRY(1, QIXIS_BASE, QIXIS_BASE_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 17, BOOKE_PAGESZ_4K, 1),
+#endif
 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 	/*
 	 * SRIO_PCIE_BOOT-SLAVE. 1M space from 0xffe00000 for