summaryrefslogtreecommitdiff
path: root/arch/x86/cpu
diff options
context:
space:
mode:
authorGraeme Russ <graeme.russ@gmail.com>2011-04-13 19:43:28 +1000
committerGraeme Russ <graeme.russ@gmail.com>2011-04-13 19:43:28 +1000
commitfea25720013f84427a0ba8833a38614fcaf488ba (patch)
tree59399e99054261e245a1f2f2dbb478adad1d49ab /arch/x86/cpu
parentdbf7115a326fa70ac3e4ca87497c7e21c6642b45 (diff)
x86: Rename i386 to x86
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Diffstat (limited to 'arch/x86/cpu')
-rw-r--r--arch/x86/cpu/Makefile50
-rw-r--r--arch/x86/cpu/config.mk32
-rw-r--r--arch/x86/cpu/cpu.c157
-rw-r--r--arch/x86/cpu/interrupts.c674
-rw-r--r--arch/x86/cpu/resetvec.S38
-rw-r--r--arch/x86/cpu/sc520/Makefile57
-rw-r--r--arch/x86/cpu/sc520/sc520.c77
-rw-r--r--arch/x86/cpu/sc520/sc520_car.S93
-rw-r--r--arch/x86/cpu/sc520/sc520_pci.c140
-rw-r--r--arch/x86/cpu/sc520/sc520_sdram.c532
-rw-r--r--arch/x86/cpu/sc520/sc520_ssi.c92
-rw-r--r--arch/x86/cpu/sc520/sc520_timer.c90
-rw-r--r--arch/x86/cpu/start.S132
-rw-r--r--arch/x86/cpu/start16.S113
-rw-r--r--arch/x86/cpu/u-boot.lds97
15 files changed, 2374 insertions, 0 deletions
diff --git a/arch/x86/cpu/Makefile b/arch/x86/cpu/Makefile
new file mode 100644
index 0000000000..ddde83c91d
--- /dev/null
+++ b/arch/x86/cpu/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2002
+# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(CPU).o
+
+START = start.o start16.o resetvec.o
+COBJS = interrupts.o cpu.o
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/x86/cpu/config.mk b/arch/x86/cpu/config.mk
new file mode 100644
index 0000000000..d1b528a437
--- /dev/null
+++ b/arch/x86/cpu/config.mk
@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2002
+# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+CROSS_COMPILE ?= i386-linux-
+
+PLATFORM_CPPFLAGS += -DCONFIG_X86 -D__I386__ -march=i386 -Werror
+
+# DO NOT MODIFY THE FOLLOWING UNLESS YOU REALLY KNOW WHAT YOU ARE DOING!
+LDPPFLAGS += -DRESET_SEG_START=0xffff0000
+LDPPFLAGS += -DRESET_SEG_SIZE=0x10000
+LDPPFLAGS += -DRESET_VEC_LOC=0xfff0
+LDPPFLAGS += -DSTART_16=0xf800
diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c
new file mode 100644
index 0000000000..0c5d7c3d53
--- /dev/null
+++ b/arch/x86/cpu/cpu.c
@@ -0,0 +1,157 @@
+/*
+ * (C) Copyright 2008-2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/processor-flags.h>
+#include <asm/interrupt.h>
+
+/*
+ * Constructor for a conventional segment GDT (or LDT) entry
+ * This is a macro so it can be used in initialisers
+ */
+#define GDT_ENTRY(flags, base, limit) \
+ ((((base) & 0xff000000ULL) << (56-24)) | \
+ (((flags) & 0x0000f0ffULL) << 40) | \
+ (((limit) & 0x000f0000ULL) << (48-16)) | \
+ (((base) & 0x00ffffffULL) << 16) | \
+ (((limit) & 0x0000ffffULL)))
+
+struct gdt_ptr {
+ u16 len;
+ u32 ptr;
+} __attribute__((packed));
+
+static void reload_gdt(void)
+{
+ /*
+ * There are machines which are known to not boot with the GDT
+ * being 8-byte unaligned. Intel recommends 16 byte alignment
+ */
+ static const u64 boot_gdt[] __attribute__((aligned(16))) = {
+ /* CS: code, read/execute, 4 GB, base 0 */
+ [GDT_ENTRY_32BIT_CS] = GDT_ENTRY(0xc09b, 0, 0xfffff),
+ /* DS: data, read/write, 4 GB, base 0 */
+ [GDT_ENTRY_32BIT_DS] = GDT_ENTRY(0xc093, 0, 0xfffff),
+ /* 16-bit CS: code, read/execute, 64 kB, base 0 */
+ [GDT_ENTRY_16BIT_CS] = GDT_ENTRY(0x109b, 0, 0x0ffff),
+ /* 16-bit DS: data, read/write, 64 kB, base 0 */
+ [GDT_ENTRY_16BIT_DS] = GDT_ENTRY(0x1093, 0, 0x0ffff),
+ };
+ static struct gdt_ptr gdt;
+
+ gdt.len = sizeof(boot_gdt)-1;
+ gdt.ptr = (u32)&boot_gdt;
+
+ asm volatile("lgdtl %0\n" \
+ "movl $((2+1)*8), %%ecx\n" \
+ "movl %%ecx, %%ds\n" \
+ "movl %%ecx, %%es\n" \
+ "movl %%ecx, %%fs\n" \
+ "movl %%ecx, %%gs\n" \
+ "movl %%ecx, %%ss" \
+ : : "m" (gdt) : "ecx");
+}
+
+int x86_cpu_init_f(void)
+{
+ const u32 em_rst = ~X86_CR0_EM;
+ const u32 mp_ne_set = X86_CR0_MP | X86_CR0_NE;
+
+ /* initialize FPU, reset EM, set MP and NE */
+ asm ("fninit\n" \
+ "movl %%cr0, %%eax\n" \
+ "andl %0, %%eax\n" \
+ "orl %1, %%eax\n" \
+ "movl %%eax, %%cr0\n" \
+ : : "i" (em_rst), "i" (mp_ne_set) : "eax");
+
+ return 0;
+}
+int cpu_init_f(void) __attribute__((weak, alias("x86_cpu_init_f")));
+
+int x86_cpu_init_r(void)
+{
+ const u32 nw_cd_rst = ~(X86_CR0_NW | X86_CR0_CD);
+
+ /* turn on the cache and disable write through */
+ asm("movl %%cr0, %%eax\n"
+ "andl %0, %%eax\n"
+ "movl %%eax, %%cr0\n"
+ "wbinvd\n" : : "i" (nw_cd_rst) : "eax");
+
+ reload_gdt();
+
+ /* Initialize core interrupt and exception functionality of CPU */
+ cpu_init_interrupts ();
+ return 0;
+}
+int cpu_init_r(void) __attribute__((weak, alias("x86_cpu_init_r")));
+
+int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ printf ("resetting ...\n");
+
+ /* wait 50 ms */
+ udelay(50000);
+ disable_interrupts();
+ reset_cpu(0);
+
+ /*NOTREACHED*/
+ return 0;
+}
+
+void flush_cache (unsigned long dummy1, unsigned long dummy2)
+{
+ asm("wbinvd\n");
+}
+
+void __attribute__ ((regparm(0))) generate_gpf(void);
+
+/* segment 0x70 is an arbitrary segment which does not exist */
+asm(".globl generate_gpf\n"
+ ".hidden generate_gpf\n"
+ ".type generate_gpf, @function\n"
+ "generate_gpf:\n"
+ "ljmp $0x70, $0x47114711\n");
+
+void __reset_cpu(ulong addr)
+{
+ printf("Resetting using x86 Triple Fault\n");
+ set_vector(13, generate_gpf); /* general protection fault handler */
+ set_vector(8, generate_gpf); /* double fault handler */
+ generate_gpf(); /* start the show */
+}
+void reset_cpu(ulong addr) __attribute__((weak, alias("__reset_cpu")));
diff --git a/arch/x86/cpu/interrupts.c b/arch/x86/cpu/interrupts.c
new file mode 100644
index 0000000000..62bcadc486
--- /dev/null
+++ b/arch/x86/cpu/interrupts.c
@@ -0,0 +1,674 @@
+/*
+ * (C) Copyright 2008-2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ *
+ * Portions of this file are derived from the Linux kernel source
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/interrupt.h>
+#include <asm/io.h>
+#include <asm/processor-flags.h>
+
+#define DECLARE_INTERRUPT(x) \
+ ".globl irq_"#x"\n" \
+ ".hidden irq_"#x"\n" \
+ ".type irq_"#x", @function\n" \
+ "irq_"#x":\n" \
+ "pushl $"#x"\n" \
+ "jmp irq_common_entry\n"
+
+/*
+ * Volatile isn't enough to prevent the compiler from reordering the
+ * read/write functions for the control registers and messing everything up.
+ * A memory clobber would solve the problem, but would prevent reordering of
+ * all loads stores around it, which can hurt performance. Solution is to
+ * use a variable and mimic reads and writes to it to enforce serialisation
+ */
+static unsigned long __force_order;
+
+static inline unsigned long read_cr0(void)
+{
+ unsigned long val;
+ asm volatile("mov %%cr0,%0\n\t" : "=r" (val), "=m" (__force_order));
+ return val;
+}
+
+static inline unsigned long read_cr2(void)
+{
+ unsigned long val;
+ asm volatile("mov %%cr2,%0\n\t" : "=r" (val), "=m" (__force_order));
+ return val;
+}
+
+static inline unsigned long read_cr3(void)
+{
+ unsigned long val;
+ asm volatile("mov %%cr3,%0\n\t" : "=r" (val), "=m" (__force_order));
+ return val;
+}
+
+static inline unsigned long read_cr4(void)
+{
+ unsigned long val;
+ asm volatile("mov %%cr4,%0\n\t" : "=r" (val), "=m" (__force_order));
+ return val;
+}
+
+static inline unsigned long get_debugreg(int regno)
+{
+ unsigned long val = 0; /* Damn you, gcc! */
+
+ switch (regno) {
+ case 0:
+ asm("mov %%db0, %0" :"=r" (val));
+ break;
+ case 1:
+ asm("mov %%db1, %0" :"=r" (val));
+ break;
+ case 2:
+ asm("mov %%db2, %0" :"=r" (val));
+ break;
+ case 3:
+ asm("mov %%db3, %0" :"=r" (val));
+ break;
+ case 6:
+ asm("mov %%db6, %0" :"=r" (val));
+ break;
+ case 7:
+ asm("mov %%db7, %0" :"=r" (val));
+ break;
+ default:
+ val = 0;
+ }
+ return val;
+}
+
+void dump_regs(struct irq_regs *regs)
+{
+ unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L;
+ unsigned long d0, d1, d2, d3, d6, d7;
+ unsigned long sp;
+
+ printf("EIP: %04x:[<%08lx>] EFLAGS: %08lx\n",
+ (u16)regs->xcs, regs->eip, regs->eflags);
+
+ printf("EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n",
+ regs->eax, regs->ebx, regs->ecx, regs->edx);
+ printf("ESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n",
+ regs->esi, regs->edi, regs->ebp, regs->esp);
+ printf(" DS: %04x ES: %04x FS: %04x GS: %04x SS: %04x\n",
+ (u16)regs->xds, (u16)regs->xes, (u16)regs->xfs, (u16)regs->xgs, (u16)regs->xss);
+
+ cr0 = read_cr0();
+ cr2 = read_cr2();
+ cr3 = read_cr3();
+ cr4 = read_cr4();
+
+ printf("CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n",
+ cr0, cr2, cr3, cr4);
+
+ d0 = get_debugreg(0);
+ d1 = get_debugreg(1);
+ d2 = get_debugreg(2);
+ d3 = get_debugreg(3);
+
+ printf("DR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n",
+ d0, d1, d2, d3);
+
+ d6 = get_debugreg(6);
+ d7 = get_debugreg(7);
+ printf("DR6: %08lx DR7: %08lx\n",
+ d6, d7);
+
+ printf("Stack:\n");
+ sp = regs->esp;
+
+ sp += 64;
+
+ while (sp > (regs->esp - 16)) {
+ if (sp == regs->esp)
+ printf("--->");
+ else
+ printf(" ");
+ printf("0x%8.8lx : 0x%8.8lx\n", sp, (ulong)readl(sp));
+ sp -= 4;
+ }
+}
+
+struct idt_entry {
+ u16 base_low;
+ u16 selector;
+ u8 res;
+ u8 access;
+ u16 base_high;
+} __attribute__ ((packed));
+
+struct desc_ptr {
+ unsigned short size;
+ unsigned long address;
+ unsigned short segment;
+} __attribute__((packed));
+
+struct idt_entry idt[256];
+
+struct desc_ptr idt_ptr;
+
+static inline void load_idt(const struct desc_ptr *dtr)
+{
+ asm volatile("cs lidt %0"::"m" (*dtr));
+}
+
+void set_vector(u8 intnum, void *routine)
+{
+ idt[intnum].base_high = (u16)((u32)(routine) >> 16);
+ idt[intnum].base_low = (u16)((u32)(routine) & 0xffff);
+}
+
+void irq_0(void);
+void irq_1(void);
+
+int cpu_init_interrupts(void)
+{
+ int i;
+
+ int irq_entry_size = irq_1 - irq_0;
+ void *irq_entry = (void *)irq_0;
+
+ /* Just in case... */
+ disable_interrupts();
+
+ /* Setup the IDT */
+ for (i=0;i<256;i++) {
+ idt[i].access = 0x8e;
+ idt[i].res = 0;
+ idt[i].selector = 0x10;
+ set_vector(i, irq_entry);
+ irq_entry += irq_entry_size;
+ }
+
+ idt_ptr.size = 256 * 8;
+ idt_ptr.address = (unsigned long) idt;
+ idt_ptr.segment = 0x18;
+
+ load_idt(&idt_ptr);
+
+ /* It is now safe to enable interrupts */
+ enable_interrupts();
+
+ return 0;
+}
+
+void __do_irq(int irq)
+{
+ printf("Unhandled IRQ : %d\n", irq);
+}
+void do_irq(int irq) __attribute__((weak, alias("__do_irq")));
+
+void enable_interrupts(void)
+{
+ asm("sti\n");
+}
+
+int disable_interrupts(void)
+{
+ long flags;
+
+ asm volatile ("pushfl ; popl %0 ; cli\n" : "=g" (flags) : );
+
+ return flags & X86_EFLAGS_IF; /* IE flags is bit 9 */
+}
+
+/* IRQ Low-Level Service Routine */
+void irq_llsr(struct irq_regs *regs)
+{
+ /*
+ * For detailed description of each exception, refer to:
+ * Intel® 64 and IA-32 Architectures Software Developer's Manual
+ * Volume 1: Basic Architecture
+ * Order Number: 253665-029US, November 2008
+ * Table 6-1. Exceptions and Interrupts
+ */
+ switch (regs->irq_id) {
+ case 0x00:
+ printf("Divide Error (Division by zero)\n");
+ dump_regs(regs);
+ while(1);
+ break;
+ case 0x01:
+ printf("Debug Interrupt (Single step)\n");
+ dump_regs(regs);
+ break;
+ case 0x02:
+ printf("NMI Interrupt\n");
+ dump_regs(regs);
+ break;
+ case 0x03:
+ printf("Breakpoint\n");
+ dump_regs(regs);
+ break;
+ case 0x04:
+ printf("Overflow\n");
+ dump_regs(regs);
+ while(1);
+ break;
+ case 0x05:
+ printf("BOUND Range Exceeded\n");
+ dump_regs(regs);
+ while(1);
+ break;
+ case 0x06:
+ printf("Invalid Opcode (UnDefined Opcode)\n");
+ dump_regs(regs);
+ while(1);
+ break;
+ case 0x07:
+ printf("Device Not Available (No Math Coprocessor)\n");
+ dump_regs(regs);
+ while(1);
+ break;
+ case 0x08:
+ printf("Double fault\n");
+ dump_regs(regs);
+ while(1);
+ break;
+ case 0x09:
+ printf("Co-processor segment overrun\n");
+ dump_regs(regs);
+ while(1);
+ break;
+ case 0x0a:
+ printf("Invalid TSS\n");
+ dump_regs(regs);
+ break;
+ case 0x0b:
+ printf("Segment Not Present\n");
+ dump_regs(regs);
+ while(1);
+ break;
+ case 0x0c:
+ printf("Stack Segment Fault\n");
+ dump_regs(regs);
+ while(1);
+ break;
+ case 0x0d:
+ printf("General Protection\n");
+ dump_regs(regs);
+ break;
+ case 0x0e:
+ printf("Page fault\n");
+ dump_regs(regs);
+ while(1);
+ break;
+ case 0x0f:
+ printf("Floating-Point Error (Math Fault)\n");
+ dump_regs(regs);
+ break;
+ case 0x10:
+ printf("Alignment check\n");
+ dump_regs(regs);
+ break;
+ case 0x11:
+ printf("Machine Check\n");
+ dump_regs(regs);
+ break;
+ case 0x12:
+ printf("SIMD Floating-Point Exception\n");
+ dump_regs(regs);
+ break;
+ case 0x13:
+ case 0x14:
+ case 0x15:
+ case 0x16:
+ case 0x17:
+ case 0x18:
+ case 0x19:
+ case 0x1a:
+ case 0x1b:
+ case 0x1c:
+ case 0x1d:
+ case 0x1e:
+ case 0x1f:
+ printf("Reserved Exception\n");
+ dump_regs(regs);
+ break;
+
+ default:
+ /* Hardware or User IRQ */
+ do_irq(regs->irq_id);
+ }
+}
+
+/*
+ * OK - This looks really horrible, but it serves a purpose - It helps create
+ * fully relocatable code.
+ * - The call to irq_llsr will be a relative jump
+ * - The IRQ entries will be guaranteed to be in order
+ * Interrupt entries are now very small (a push and a jump) but they are
+ * now slower (all registers pushed on stack which provides complete
+ * crash dumps in the low level handlers
+ *
+ * Interrupt Entry Point:
+ * - Interrupt has caused eflags, CS and EIP to be pushed
+ * - Interrupt Vector Handler has pushed orig_eax
+ * - pt_regs.esp needs to be adjusted by 40 bytes:
+ * 12 bytes pushed by CPU (EFLAGSF, CS, EIP)
+ * 4 bytes pushed by vector handler (irq_id)
+ * 24 bytes pushed before SP (SS, GS, FS, ES, DS, EAX)
+ * NOTE: Only longs are pushed on/popped off the stack!
+ */
+asm(".globl irq_common_entry\n" \
+ ".hidden irq_common_entry\n" \
+ ".type irq_common_entry, @function\n" \
+ "irq_common_entry:\n" \
+ "cld\n" \
+ "pushl %ss\n" \
+ "pushl %gs\n" \
+ "pushl %fs\n" \
+ "pushl %es\n" \
+ "pushl %ds\n" \
+ "pushl %eax\n" \
+ "movl %esp, %eax\n" \
+ "addl $40, %eax\n" \
+ "pushl %eax\n" \
+ "pushl %ebp\n" \
+ "pushl %edi\n" \
+ "pushl %esi\n" \
+ "pushl %edx\n" \
+ "pushl %ecx\n" \
+ "pushl %ebx\n" \
+ "mov %esp, %eax\n" \
+ "call irq_llsr\n" \
+ "popl %ebx\n" \
+ "popl %ecx\n" \
+ "popl %edx\n" \
+ "popl %esi\n" \
+ "popl %edi\n" \
+ "popl %ebp\n" \
+ "popl %eax\n" \
+ "popl %eax\n" \
+ "popl %ds\n" \
+ "popl %es\n" \
+ "popl %fs\n" \
+ "popl %gs\n" \
+ "popl %ss\n" \
+ "add $4, %esp\n" \
+ "iret\n" \
+ DECLARE_INTERRUPT(0) \
+ DECLARE_INTERRUPT(1) \
+ DECLARE_INTERRUPT(2) \
+ DECLARE_INTERRUPT(3) \
+ DECLARE_INTERRUPT(4) \
+ DECLARE_INTERRUPT(5) \
+ DECLARE_INTERRUPT(6) \
+ DECLARE_INTERRUPT(7) \
+ DECLARE_INTERRUPT(8) \
+ DECLARE_INTERRUPT(9) \
+ DECLARE_INTERRUPT(10) \
+ DECLARE_INTERRUPT(11) \
+ DECLARE_INTERRUPT(12) \
+ DECLARE_INTERRUPT(13) \
+ DECLARE_INTERRUPT(14) \
+ DECLARE_INTERRUPT(15) \
+ DECLARE_INTERRUPT(16) \
+ DECLARE_INTERRUPT(17) \
+ DECLARE_INTERRUPT(18) \
+ DECLARE_INTERRUPT(19) \
+ DECLARE_INTERRUPT(20) \
+ DECLARE_INTERRUPT(21) \
+ DECLARE_INTERRUPT(22) \
+ DECLARE_INTERRUPT(23) \
+ DECLARE_INTERRUPT(24) \
+ DECLARE_INTERRUPT(25) \
+ DECLARE_INTERRUPT(26) \
+ DECLARE_INTERRUPT(27) \
+ DECLARE_INTERRUPT(28) \
+ DECLARE_INTERRUPT(29) \
+ DECLARE_INTERRUPT(30) \
+ DECLARE_INTERRUPT(31) \
+ DECLARE_INTERRUPT(32) \
+ DECLARE_INTERRUPT(33) \
+ DECLARE_INTERRUPT(34) \
+ DECLARE_INTERRUPT(35) \
+ DECLARE_INTERRUPT(36) \
+ DECLARE_INTERRUPT(37) \
+ DECLARE_INTERRUPT(38) \
+ DECLARE_INTERRUPT(39) \
+ DECLARE_INTERRUPT(40) \
+ DECLARE_INTERRUPT(41) \
+ DECLARE_INTERRUPT(42) \
+ DECLARE_INTERRUPT(43) \
+ DECLARE_INTERRUPT(44) \
+ DECLARE_INTERRUPT(45) \
+ DECLARE_INTERRUPT(46) \
+ DECLARE_INTERRUPT(47) \
+ DECLARE_INTERRUPT(48) \
+ DECLARE_INTERRUPT(49) \
+ DECLARE_INTERRUPT(50) \
+ DECLARE_INTERRUPT(51) \
+ DECLARE_INTERRUPT(52) \
+ DECLARE_INTERRUPT(53) \
+ DECLARE_INTERRUPT(54) \
+ DECLARE_INTERRUPT(55) \
+ DECLARE_INTERRUPT(56) \
+ DECLARE_INTERRUPT(57) \
+ DECLARE_INTERRUPT(58) \
+ DECLARE_INTERRUPT(59) \
+ DECLARE_INTERRUPT(60) \
+ DECLARE_INTERRUPT(61) \
+ DECLARE_INTERRUPT(62) \
+ DECLARE_INTERRUPT(63) \
+ DECLARE_INTERRUPT(64) \
+ DECLARE_INTERRUPT(65) \
+ DECLARE_INTERRUPT(66) \
+ DECLARE_INTERRUPT(67) \
+ DECLARE_INTERRUPT(68) \
+ DECLARE_INTERRUPT(69) \
+ DECLARE_INTERRUPT(70) \
+ DECLARE_INTERRUPT(71) \
+ DECLARE_INTERRUPT(72) \
+ DECLARE_INTERRUPT(73) \
+ DECLARE_INTERRUPT(74) \
+ DECLARE_INTERRUPT(75) \
+ DECLARE_INTERRUPT(76) \
+ DECLARE_INTERRUPT(77) \
+ DECLARE_INTERRUPT(78) \
+ DECLARE_INTERRUPT(79) \
+ DECLARE_INTERRUPT(80) \
+ DECLARE_INTERRUPT(81) \
+ DECLARE_INTERRUPT(82) \
+ DECLARE_INTERRUPT(83) \
+ DECLARE_INTERRUPT(84) \
+ DECLARE_INTERRUPT(85) \
+ DECLARE_INTERRUPT(86) \
+ DECLARE_INTERRUPT(87) \
+ DECLARE_INTERRUPT(88) \
+ DECLARE_INTERRUPT(89) \
+ DECLARE_INTERRUPT(90) \
+ DECLARE_INTERRUPT(91) \
+ DECLARE_INTERRUPT(92) \
+ DECLARE_INTERRUPT(93) \
+ DECLARE_INTERRUPT(94) \
+ DECLARE_INTERRUPT(95) \
+ DECLARE_INTERRUPT(97) \
+ DECLARE_INTERRUPT(96) \
+ DECLARE_INTERRUPT(98) \
+ DECLARE_INTERRUPT(99) \
+ DECLARE_INTERRUPT(100) \
+ DECLARE_INTERRUPT(101) \
+ DECLARE_INTERRUPT(102) \
+ DECLARE_INTERRUPT(103) \
+ DECLARE_INTERRUPT(104) \
+ DECLARE_INTERRUPT(105) \
+ DECLARE_INTERRUPT(106) \
+ DECLARE_INTERRUPT(107) \
+ DECLARE_INTERRUPT(108) \
+ DECLARE_INTERRUPT(109) \
+ DECLARE_INTERRUPT(110) \
+ DECLARE_INTERRUPT(111) \
+ DECLARE_INTERRUPT(112) \
+ DECLARE_INTERRUPT(113) \
+ DECLARE_INTERRUPT(114) \
+ DECLARE_INTERRUPT(115) \
+ DECLARE_INTERRUPT(116) \
+ DECLARE_INTERRUPT(117) \
+ DECLARE_INTERRUPT(118) \
+ DECLARE_INTERRUPT(119) \
+ DECLARE_INTERRUPT(120) \
+ DECLARE_INTERRUPT(121) \
+ DECLARE_INTERRUPT(122) \
+ DECLARE_INTERRUPT(123) \
+ DECLARE_INTERRUPT(124) \
+ DECLARE_INTERRUPT(125) \
+ DECLARE_INTERRUPT(126) \
+ DECLARE_INTERRUPT(127) \
+ DECLARE_INTERRUPT(128) \
+ DECLARE_INTERRUPT(129) \
+ DECLARE_INTERRUPT(130) \
+ DECLARE_INTERRUPT(131) \
+ DECLARE_INTERRUPT(132) \
+ DECLARE_INTERRUPT(133) \
+ DECLARE_INTERRUPT(134) \
+ DECLARE_INTERRUPT(135) \
+ DECLARE_INTERRUPT(136) \
+ DECLARE_INTERRUPT(137) \
+ DECLARE_INTERRUPT(138) \
+ DECLARE_INTERRUPT(139) \
+ DECLARE_INTERRUPT(140) \
+ DECLARE_INTERRUPT(141) \
+ DECLARE_INTERRUPT(142) \
+ DECLARE_INTERRUPT(143) \
+ DECLARE_INTERRUPT(144) \
+ DECLARE_INTERRUPT(145) \
+ DECLARE_INTERRUPT(146) \
+ DECLARE_INTERRUPT(147) \
+ DECLARE_INTERRUPT(148) \
+ DECLARE_INTERRUPT(149) \
+ DECLARE_INTERRUPT(150) \
+ DECLARE_INTERRUPT(151) \
+ DECLARE_INTERRUPT(152) \
+ DECLARE_INTERRUPT(153) \
+ DECLARE_INTERRUPT(154) \
+ DECLARE_INTERRUPT(155) \
+ DECLARE_INTERRUPT(156) \
+ DECLARE_INTERRUPT(157) \
+ DECLARE_INTERRUPT(158) \
+ DECLARE_INTERRUPT(159) \
+ DECLARE_INTERRUPT(160) \
+ DECLARE_INTERRUPT(161) \
+ DECLARE_INTERRUPT(162) \
+ DECLARE_INTERRUPT(163) \
+ DECLARE_INTERRUPT(164) \
+ DECLARE_INTERRUPT(165) \
+ DECLARE_INTERRUPT(166) \
+ DECLARE_INTERRUPT(167) \
+ DECLARE_INTERRUPT(168) \
+ DECLARE_INTERRUPT(169) \
+ DECLARE_INTERRUPT(170) \
+ DECLARE_INTERRUPT(171) \
+ DECLARE_INTERRUPT(172) \
+ DECLARE_INTERRUPT(173) \
+ DECLARE_INTERRUPT(174) \
+ DECLARE_INTERRUPT(175) \
+ DECLARE_INTERRUPT(176) \
+ DECLARE_INTERRUPT(177) \
+ DECLARE_INTERRUPT(178) \
+ DECLARE_INTERRUPT(179) \
+ DECLARE_INTERRUPT(180) \
+ DECLARE_INTERRUPT(181) \
+ DECLARE_INTERRUPT(182) \
+ DECLARE_INTERRUPT(183) \
+ DECLARE_INTERRUPT(184) \
+ DECLARE_INTERRUPT(185) \
+ DECLARE_INTERRUPT(186) \
+ DECLARE_INTERRUPT(187) \
+ DECLARE_INTERRUPT(188) \
+ DECLARE_INTERRUPT(189) \
+ DECLARE_INTERRUPT(190) \
+ DECLARE_INTERRUPT(191) \
+ DECLARE_INTERRUPT(192) \
+ DECLARE_INTERRUPT(193) \
+ DECLARE_INTERRUPT(194) \
+ DECLARE_INTERRUPT(195) \
+ DECLARE_INTERRUPT(196) \
+ DECLARE_INTERRUPT(197) \
+ DECLARE_INTERRUPT(198) \
+ DECLARE_INTERRUPT(199) \
+ DECLARE_INTERRUPT(200) \
+ DECLARE_INTERRUPT(201) \
+ DECLARE_INTERRUPT(202) \
+ DECLARE_INTERRUPT(203) \
+ DECLARE_INTERRUPT(204) \
+ DECLARE_INTERRUPT(205) \
+ DECLARE_INTERRUPT(206) \
+ DECLARE_INTERRUPT(207) \
+ DECLARE_INTERRUPT(208) \
+ DECLARE_INTERRUPT(209) \
+ DECLARE_INTERRUPT(210) \
+ DECLARE_INTERRUPT(211) \
+ DECLARE_INTERRUPT(212) \
+ DECLARE_INTERRUPT(213) \
+ DECLARE_INTERRUPT(214) \
+ DECLARE_INTERRUPT(215) \
+ DECLARE_INTERRUPT(216) \
+ DECLARE_INTERRUPT(217) \
+ DECLARE_INTERRUPT(218) \
+ DECLARE_INTERRUPT(219) \
+ DECLARE_INTERRUPT(220) \
+ DECLARE_INTERRUPT(221) \
+ DECLARE_INTERRUPT(222) \
+ DECLARE_INTERRUPT(223) \
+ DECLARE_INTERRUPT(224) \
+ DECLARE_INTERRUPT(225) \
+ DECLARE_INTERRUPT(226) \
+ DECLARE_INTERRUPT(227) \
+ DECLARE_INTERRUPT(228) \
+ DECLARE_INTERRUPT(229) \
+ DECLARE_INTERRUPT(230) \
+ DECLARE_INTERRUPT(231) \
+ DECLARE_INTERRUPT(232) \
+ DECLARE_INTERRUPT(233) \
+ DECLARE_INTERRUPT(234) \
+ DECLARE_INTERRUPT(235) \
+ DECLARE_INTERRUPT(236) \
+ DECLARE_INTERRUPT(237) \
+ DECLARE_INTERRUPT(238) \
+ DECLARE_INTERRUPT(239) \
+ DECLARE_INTERRUPT(240) \
+ DECLARE_INTERRUPT(241) \
+ DECLARE_INTERRUPT(242) \
+ DECLARE_INTERRUPT(243) \
+ DECLARE_INTERRUPT(244) \
+ DECLARE_INTERRUPT(245) \
+ DECLARE_INTERRUPT(246) \
+ DECLARE_INTERRUPT(247) \
+ DECLARE_INTERRUPT(248) \
+ DECLARE_INTERRUPT(249) \
+ DECLARE_INTERRUPT(250) \
+ DECLARE_INTERRUPT(251) \
+ DECLARE_INTERRUPT(252) \
+ DECLARE_INTERRUPT(253) \
+ DECLARE_INTERRUPT(254) \
+ DECLARE_INTERRUPT(255));
diff --git a/arch/x86/cpu/resetvec.S b/arch/x86/cpu/resetvec.S
new file mode 100644
index 0000000000..c690d2516e
--- /dev/null
+++ b/arch/x86/cpu/resetvec.S
@@ -0,0 +1,38 @@
+/*
+ * U-boot - x86 Startup Code
+ *
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Reset vector, jumps to start16.S */
+
+.extern start16
+
+.section .resetvec, "ax"
+.code16
+reset_vector:
+ cli
+ cld
+ jmp start16
+
+ .org 0xf
+ nop
diff --git a/arch/x86/cpu/sc520/Makefile b/arch/x86/cpu/sc520/Makefile
new file mode 100644
index 0000000000..54260b6107
--- /dev/null
+++ b/arch/x86/cpu/sc520/Makefile
@@ -0,0 +1,57 @@
+#
+# (C) Copyright 2008
+# Graeme Russ, graeme.russ@gmail.com.
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2002
+# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB := $(obj)lib$(SOC).o
+
+COBJS-$(CONFIG_SYS_SC520) += sc520.o
+COBJS-$(CONFIG_PCI) += sc520_pci.o
+COBJS-$(CONFIG_SYS_SC520) += sc520_sdram.o
+COBJS-$(CONFIG_SYS_SC520_SSI) += sc520_ssi.o
+COBJS-$(CONFIG_SYS_SC520_TIMER) += sc520_timer.o
+
+SOBJS-$(CONFIG_SYS_SC520) += sc520_car.o
+
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+######################################################################### \ No newline at end of file
diff --git a/arch/x86/cpu/sc520/sc520.c b/arch/x86/cpu/sc520/sc520.c
new file mode 100644
index 0000000000..edc1a5c0f2
--- /dev/null
+++ b/arch/x86/cpu/sc520/sc520.c
@@ -0,0 +1,77 @@
+/*
+ * (C) Copyright 2008-2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor-flags.h>
+#include <asm/ic/sc520.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+sc520_mmcr_t *sc520_mmcr = (sc520_mmcr_t *)SC520_MMCR_BASE;
+
+int cpu_init_f(void)
+{
+ if (CONFIG_SYS_SC520_HIGH_SPEED) {
+ /* set it to 133 MHz and write back */
+ writeb(0x02, &sc520_mmcr->cpuctl);
+ gd->cpu_clk = 133000000;
+ } else {
+ /* set it to 100 MHz and write back */
+ writeb(0x01, &sc520_mmcr->cpuctl);
+ gd->cpu_clk = 100000000;
+ }
+
+ /* wait at least one millisecond */
+ asm("movl $0x2000, %%ecx\n"
+ "0: pushl %%ecx\n"
+ "popl %%ecx\n"
+ "loop 0b\n": : : "ecx");
+
+ return x86_cpu_init_f();
+}
+
+int cpu_init_r(void)
+{
+ /* Disable the PAR used for CAR */
+ writel(0x0000000, &sc520_mmcr->par[2]);
+
+ /* turn on the SDRAM write buffer */
+ writeb(0x11, &sc520_mmcr->dbctl);
+
+ return x86_cpu_init_r();
+}
+
+#ifdef CONFIG_SYS_SC520_RESET
+void reset_cpu(ulong addr)
+{
+ printf("Resetting using SC520 MMCR\n");
+ /* Write a '1' to the SYS_RST of the RESCFG MMCR */
+ writeb(0x01, &sc520_mmcr->rescfg);
+
+ /* NOTREACHED */
+}
+#endif
diff --git a/arch/x86/cpu/sc520/sc520_car.S b/arch/x86/cpu/sc520/sc520_car.S
new file mode 100644
index 0000000000..a33f94f491
--- /dev/null
+++ b/arch/x86/cpu/sc520/sc520_car.S
@@ -0,0 +1,93 @@
+/*
+ * (C) Copyright 2010-2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/processor-flags.h>
+#include <asm/ic/sc520.h>
+
+.section .text
+
+.globl car_init
+car_init:
+ /*
+ * How to enable Cache-As-RAM for the AMD Elan SC520:
+ * 1. Turn off the CPU Cache (may not be strictly required)
+ * 2. Set code execution PAR (usually the BOOTCS region) to be
+ * non-cachable
+ * 3. Create a Cachable PAR Region for an area of memory which is
+ * a) NOT where the code is being executed
+ * b) NOT SDRAM (Controller not initialised yet)
+ * c) WILL response to read requests
+ * The easiest way to do this is to create a second BOOTCS
+ * PAR mappnig with an address != the PAR in step 2
+ * 4. Issue a wbinvd to invalidate the CPU cache
+ * 5. Turn on the CPU Cache
+ * 6. Read 16kB from the cached PAR region setup in step 3
+ * 7. Turn off the CPU Cache (but DO NOT issue a wbinvd)
+ *
+ * The following code uses PAR2 as the cached PAR (PAR0 and PAR1
+ * are avoided as these are the only two PARs which can be used
+ * as PCI BUS Memory regions which the board might require)
+ *
+ * The configuration of PAR2 must be set in the board configuration
+ * file as CONFIG_SYS_SC520_CAR_PAR
+ */
+
+ /* Configure Cache-As-RAM PAR */
+ movl $CONFIG_SYS_SC520_CAR_PAR, %eax
+ movl $SC520_PAR2, %edi
+ movl %eax, (%edi)
+
+ /* Trash the cache then turn it on */
+ wbinvd
+ movl %cr0, %eax
+ andl $~(X86_CR0_NW | X86_CR0_CD), %eax
+ movl %eax, %cr0
+
+ /*
+ * The cache is now enabled and empty. Map a region of memory to
+ * it by reading that region.
+ */
+ movl $CONFIG_SYS_CAR_ADDR, %esi
+ movl $CONFIG_SYS_CAR_SIZE, %ecx
+ shrl $2, %ecx /* we are reading longs */
+ cld
+ rep lodsl
+
+ /* Turn off the cache, but don't trash it */
+ movl %cr0, %eax
+ orl $(X86_CR0_NW | X86_CR0_CD), %eax
+ movl %eax, %cr0
+
+ /* Clear the CAR region */
+ xorl %eax, %eax
+ movl $CONFIG_SYS_CAR_ADDR, %edi
+ movl $CONFIG_SYS_CAR_SIZE, %ecx
+ shrl $2, %ecx /* we are writing longs */
+ rep stosl
+
+ /*
+ * Done - We should now have CONFIG_SYS_CAR_SIZE bytes of
+ * Cache-As-RAM
+ */
+ jmp car_init_ret
diff --git a/arch/x86/cpu/sc520/sc520_pci.c b/arch/x86/cpu/sc520/sc520_pci.c
new file mode 100644
index 0000000000..8cd7ffecdb
--- /dev/null
+++ b/arch/x86/cpu/sc520/sc520_pci.c
@@ -0,0 +1,140 @@
+/*
+ * (C) Copyright 2008-2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/io.h>
+#include <asm/pci.h>
+#include <asm/ic/pci.h>
+#include <asm/ic/sc520.h>
+
+static struct {
+ u8 priority;
+ u16 level_reg;
+ u8 level_bit;
+} sc520_irq[] = {
+ { SC520_IRQ0, 0, 0x01 },
+ { SC520_IRQ1, 0, 0x02 },
+ { SC520_IRQ2, 1, 0x02 },
+ { SC520_IRQ3, 0, 0x08 },
+ { SC520_IRQ4, 0, 0x10 },
+ { SC520_IRQ5, 0, 0x20 },
+ { SC520_IRQ6, 0, 0x40 },
+ { SC520_IRQ7, 0, 0x80 },
+
+ { SC520_IRQ8, 1, 0x01 },
+ { SC520_IRQ9, 1, 0x02 },
+ { SC520_IRQ10, 1, 0x04 },
+ { SC520_IRQ11, 1, 0x08 },
+ { SC520_IRQ12, 1, 0x10 },
+ { SC520_IRQ13, 1, 0x20 },
+ { SC520_IRQ14, 1, 0x40 },
+ { SC520_IRQ15, 1, 0x80 }
+};
+
+/* The interrupt used for PCI INTA-INTD */
+int sc520_pci_ints[15] = {
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1
+};
+
+/* utility function to configure a pci interrupt */
+int pci_sc520_set_irq(int pci_pin, int irq)
+{
+ int i;
+ u8 tmpb;
+ u16 tmpw;
+
+ debug("set_irq(): map INT%c to IRQ%d\n", pci_pin + 'A', irq);
+
+ if (irq < 0 || irq > 15) {
+ return -1; /* illegal irq */
+ }
+
+ if (pci_pin < 0 || pci_pin > 15) {
+ return -1; /* illegal pci int pin */
+ }
+
+ /* first disable any non-pci interrupt source that use
+ * this level */
+
+ /* PCI interrupt mapping (A through D)*/
+ for (i=0; i<=3 ;i++) {
+ if (readb(&sc520_mmcr->pci_int_map[i]) == sc520_irq[irq].priority)
+ writeb(SC520_IRQ_DISABLED, &sc520_mmcr->pci_int_map[i]);
+ }
+
+ /* GP IRQ interrupt mapping */
+ for (i=0; i<=10 ;i++) {
+ if (readb(&sc520_mmcr->gp_int_map[i]) == sc520_irq[irq].priority)
+ writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_int_map[i]);
+ }
+
+ /* Set the trigger to level */
+ tmpb = readb(&sc520_mmcr->pic_mode[sc520_irq[irq].level_reg]);
+ tmpb |= sc520_irq[irq].level_bit;
+ writeb(tmpb, &sc520_mmcr->pic_mode[sc520_irq[irq].level_reg]);
+
+
+ if (pci_pin < 4) {
+ /* PCI INTA-INTD */
+ /* route the interrupt */
+ writeb(sc520_irq[irq].priority, &sc520_mmcr->pci_int_map[pci_pin]);
+ } else {
+ /* GPIRQ0-GPIRQ10 used for additional PCI INTS */
+ writeb(sc520_irq[irq].priority, &sc520_mmcr->gp_int_map[pci_pin - 4]);
+
+ /* also set the polarity in this case */
+ tmpw = readw(&sc520_mmcr->intpinpol);
+ tmpw |= (1 << (pci_pin-4));
+ writew(tmpw, &sc520_mmcr->intpinpol);
+ }
+
+ /* register the pin */
+ sc520_pci_ints[pci_pin] = irq;
+
+
+ return 0; /* OK */
+}
+
+void pci_sc520_init(struct pci_controller *hose)
+{
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+ hose->region_count = pci_set_regions(hose);
+
+ pci_setup_type1(hose,
+ SC520_REG_ADDR,
+ SC520_REG_DATA);
+
+ pci_register_hose(hose);
+
+ hose->last_busno = pci_hose_scan(hose);
+
+ /* enable target memory acceses on host brige */
+ pci_write_config_word(0, PCI_COMMAND,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+}
diff --git a/arch/x86/cpu/sc520/sc520_sdram.c b/arch/x86/cpu/sc520/sc520_sdram.c
new file mode 100644
index 0000000000..f3623f53f2
--- /dev/null
+++ b/arch/x86/cpu/sc520/sc520_sdram.c
@@ -0,0 +1,532 @@
+/*
+ * (C) Copyright 2010,2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor-flags.h>
+#include <asm/ic/sc520.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct sc520_sdram_info {
+ u8 banks;
+ u8 columns;
+ u8 rows;
+ u8 size;
+};
+
+static void sc520_sizemem(void);
+static void sc520_set_dram_timing(void);
+static void sc520_set_dram_refresh_rate(void);
+static void sc520_enable_dram_refresh(void);
+static void sc520_enable_sdram(void);
+#if CONFIG_SYS_SDRAM_ECC_ENABLE
+static void sc520_enable_ecc(void)
+#endif
+
+int dram_init_f(void)
+{
+ sc520_sizemem();
+ sc520_set_dram_timing();
+ sc520_set_dram_refresh_rate();
+ sc520_enable_dram_refresh();
+ sc520_enable_sdram();
+#if CONFIG_SYS_SDRAM_ECC_ENABLE
+ sc520_enable_ecc();
+#endif
+
+ return 0;
+}
+
+static inline void sc520_dummy_write(void)
+{
+ writew(0x0000, CACHELINESZ);
+}
+static inline void sc520_issue_sdram_op_mode_select(u8 command)
+{
+ writeb(command, &sc520_mmcr->drcctl);
+ sc520_dummy_write();
+}
+
+static inline int check_long(u32 test_long)
+{
+ u8 i;
+ u8 tmp_byte = (u8)(test_long & 0x000000ff);
+
+ for (i = 1; i < 4; i++) {
+ if ((u8)((test_long >> (i * 8)) & 0x000000ff) != tmp_byte)
+ return -1;
+ }
+
+ return 0;
+}
+
+static inline int write_and_test(u32 data, u32 address)
+{
+ writel(data, address);
+ if (readl(address) == data)
+ return 0; /* Good */
+ else
+ return -1; /* Bad */
+}
+
+static void sc520_enable_sdram(void)
+{
+ u32 par_config;
+
+ /* Enable Writes, Caching and Code Execution to SDRAM */
+ par_config = readl(&sc520_mmcr->par[3]);
+ par_config &= ~(SC520_PAR_EXEC_DIS |
+ SC520_PAR_CACHE_DIS |
+ SC520_PAR_WRITE_DIS);
+ writel(par_config, &sc520_mmcr->par[3]);
+
+ par_config = readl(&sc520_mmcr->par[4]);
+ par_config &= ~(SC520_PAR_EXEC_DIS |
+ SC520_PAR_CACHE_DIS |
+ SC520_PAR_WRITE_DIS);
+ writel(par_config, &sc520_mmcr->par[4]);
+}
+
+static void sc520_set_dram_timing(void)
+{
+ u8 drctmctl = 0x00;
+
+#if defined CONFIG_SYS_SDRAM_DRCTMCTL
+ /* just have your hardware designer _GIVE_ you what you need here! */
+ drctmctl = CONFIG_SYS_SDRAM_DRCTMCTL;
+#else
+ switch (CONFIG_SYS_SDRAM_RAS_CAS_DELAY) {
+ case 2:
+ break;
+ case 3:
+ drctmctl |= 0x01;
+ break;
+ case 4:
+ default:
+ drctmctl |= 0x02;
+ break;
+ }
+
+ switch (CONFIG_SYS_SDRAM_PRECHARGE_DELAY) {
+ case 2:
+ break;
+ case 3:
+ drctmctl |= 0x04;
+ break;
+ case 4:
+ default:
+ drctmctl |= 0x08;
+ break;
+
+ case 6:
+ drctmctl |= 0x0c;
+ break;
+ }
+
+ switch (CONFIG_SYS_SDRAM_CAS_LATENCY) {
+ case 2:
+ break;
+ case 3:
+ default:
+ drctmctl |= 0x10;
+ break;
+ }
+#endif
+ writeb(drctmctl, &sc520_mmcr->drctmctl);
+
+ /* Issue load mode register command */
+ sc520_issue_sdram_op_mode_select(0x03);
+}
+
+static void sc520_set_dram_refresh_rate(void)
+{
+ u8 drctl;
+
+ drctl = readb(&sc520_mmcr->drcctl);
+ drctl &= 0xcf;
+
+ switch (CONFIG_SYS_SDRAM_REFRESH_RATE) {
+ case 78:
+ break;
+ case 156:
+ default:
+ drctl |= 0x10;
+ break;
+ case 312:
+ drctl |= 0x20;
+ break;
+ case 624:
+ drctl |= 0x30;
+ break;
+ }
+
+ writeb(drctl, &sc520_mmcr->drcctl);
+}
+
+static void sc520_enable_dram_refresh(void)
+{
+ u8 drctl;
+
+ drctl = readb(&sc520_mmcr->drcctl);
+ drctl &= 0x30; /* keep refresh rate */
+ drctl |= 0x08; /* enable refresh, normal mode */
+
+ writeb(drctl, &sc520_mmcr->drcctl);
+}
+
+static void sc520_get_bank_info(int bank, struct sc520_sdram_info *bank_info)
+{
+ u32 col_data;
+ u32 row_data;
+
+ u32 drcbendadr;
+ u16 drccfg;
+
+ u8 banks = 0x00;
+ u8 columns = 0x00;
+ u8 rows = 0x00;
+
+ bank_info->banks = 0x00;
+ bank_info->columns = 0x00;
+ bank_info->rows = 0x00;
+ bank_info->size = 0x00;
+
+ if ((bank < 0) || (bank > 3)) {
+ printf("Bad Bank ID\n");
+ return;
+ }
+
+ /* Save configuration */
+ drcbendadr = readl(&sc520_mmcr->drcbendadr);
+ drccfg = readw(&sc520_mmcr->drccfg);
+
+ /* Setup SDRAM Bank to largest possible size */
+ writew(0x000b << (bank * 4), &sc520_mmcr->drccfg);
+
+ /* Set ending address for this bank */
+ writel(0x000000ff << (bank * 8), &sc520_mmcr->drcbendadr);
+
+ /* write col 11 wrap adr */
+ if (write_and_test(COL11_DATA, COL11_ADR) != 0)
+ goto restore_and_exit;
+
+ /* write col 10 wrap adr */
+ if (write_and_test(COL10_DATA, COL10_ADR) != 0)
+ goto restore_and_exit;
+
+ /* write col 9 wrap adr */
+ if (write_and_test(COL09_DATA, COL09_ADR) != 0)
+ goto restore_and_exit;
+
+ /* write col 8 wrap adr */
+ if (write_and_test(COL08_DATA, COL08_ADR) != 0)
+ goto restore_and_exit;
+
+ col_data = readl(COL11_ADR);
+
+ /* All four bytes in the read long must be the same */
+ if (check_long(col_data) < 0)
+ goto restore_and_exit;
+
+ if ((col_data >= COL08_DATA) && (col_data <= COL11_DATA))
+ columns = (u8)(col_data & 0x000000ff);
+ else
+ goto restore_and_exit;
+
+ /* write row 14 wrap adr */
+ if (write_and_test(ROW14_DATA, ROW14_ADR) != 0)
+ goto restore_and_exit;
+
+ /* write row 13 wrap adr */
+ if (write_and_test(ROW13_DATA, ROW13_ADR) != 0)
+ goto restore_and_exit;
+
+ /* write row 12 wrap adr */
+ if (write_and_test(ROW12_DATA, ROW12_ADR) != 0)
+ goto restore_and_exit;
+
+ /* write row 11 wrap adr */
+ if (write_and_test(ROW11_DATA, ROW11_ADR) != 0)
+ goto restore_and_exit;
+
+ if (write_and_test(ROW10_DATA, ROW10_ADR) != 0)
+ goto restore_and_exit;
+
+ /*
+ * read data @ row 12 wrap adr to determine number of banks,
+ * and read data @ row 14 wrap adr to determine number of rows.
+ * if data @ row 12 wrap adr is not AA, 11 or 12 we have bad RAM.
+ * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4
+ * if data @ row 12 wrap == 11 or 12, we have 4 banks,
+ */
+ row_data = readl(ROW12_ADR);
+
+ /* All four bytes in the read long must be the same */
+ if (check_long(row_data) != 0)
+ goto restore_and_exit;
+
+ switch (row_data) {
+ case ROW10_DATA:
+ banks = 2;
+ break;
+
+ case ROW11_DATA:
+ case ROW12_DATA:
+ banks = 4;
+ break;
+
+ default:
+ goto restore_and_exit;
+ }
+
+ row_data = readl(ROW14_ADR);
+
+ /* All four bytes in the read long must be the same */
+ if (check_long(row_data) != 0)
+ goto restore_and_exit;
+
+ switch (row_data) {
+ case ROW11_DATA:
+ case ROW12_DATA:
+ case ROW13_DATA:
+ case ROW14_DATA:
+ rows = (u8)(row_data & 0x000000ff);
+ break;
+
+ default:
+ goto restore_and_exit;
+ }
+
+ bank_info->banks = banks;
+ bank_info->columns = columns;
+ bank_info->rows = rows;
+
+ if ((bank_info->banks != 0) &&
+ (bank_info->columns != 0) &&
+ (bank_info->rows != 0)) {
+ bank_info->size = bank_info->rows;
+ bank_info->size >>= (11 - bank_info->columns);
+ bank_info->size++;
+ }
+
+restore_and_exit:
+ /* Restore configuration */
+ writel(drcbendadr, &sc520_mmcr->drcbendadr);
+ writew(drccfg, &sc520_mmcr->drccfg);
+}
+
+static void sc520_setup_sizemem(void)
+{
+ u8 i;
+
+ /* Disable write buffer */
+ writeb(0x00, &sc520_mmcr->dbctl);
+
+ /* Disable ECC */
+ writeb(0x00, &sc520_mmcr->eccctl);
+
+ /* Set slowest SDRAM timing */
+ writeb(0x1e, &sc520_mmcr->drctmctl);
+
+ /* Issue a NOP to all SDRAM banks */
+ sc520_issue_sdram_op_mode_select(0x01);
+
+ /* Delay for 100 microseconds */
+ udelay(100);
+
+ /* Issue 'All Banks Precharge' command */
+ sc520_issue_sdram_op_mode_select(0x02);
+
+ /* Issue 2 'Auto Refresh Enable' command */
+ sc520_issue_sdram_op_mode_select(0x04);
+ sc520_dummy_write();
+
+ /* Issue 'Load Mode Register' command */
+ sc520_issue_sdram_op_mode_select(0x03);
+
+ /* Issue 8 more 'Auto Refresh Enable' commands */
+ sc520_issue_sdram_op_mode_select(0x04);
+ for (i = 0; i < 7; i++)
+ sc520_dummy_write();
+
+ /* Set control register to 'Normal Mode' */
+ writeb(0x00, &sc520_mmcr->drcctl);
+}
+
+static void sc520_sizemem(void)
+{
+ struct sc520_sdram_info sdram_info[4];
+ u8 bank_config = 0x00;
+ u8 end_addr = 0x00;
+ u16 drccfg = 0x0000;
+ u32 drcbendadr = 0x00000000;
+ u8 i;
+
+ /* Use PARs to disable caching of maximum allowable 256MB SDRAM */
+ writel(SC520_SDRAM1_PAR | SC520_PAR_CACHE_DIS, &sc520_mmcr->par[3]);
+ writel(SC520_SDRAM2_PAR | SC520_PAR_CACHE_DIS, &sc520_mmcr->par[4]);
+
+ sc520_setup_sizemem();
+
+ gd->ram_size = 0;
+
+ /* Size each SDRAM bank */
+ for (i = 0; i <= 3; i++) {
+ sc520_get_bank_info(i, &sdram_info[i]);
+
+ if (sdram_info[i].banks != 0) {
+ /* Update Configuration register */
+ bank_config = sdram_info[i].columns - 8;
+
+ if (sdram_info[i].banks == 4)
+ bank_config |= 0x08;
+
+ drccfg |= bank_config << (i * 4);
+
+ /* Update End Address register */
+ end_addr += sdram_info[i].size;
+ drcbendadr |= (end_addr | 0x80) << (i * 8);
+
+ gd->ram_size += sdram_info[i].size << 22;
+ }
+
+ /* Issue 'All Banks Precharge' command */
+ sc520_issue_sdram_op_mode_select(0x02);
+
+ /* Set control register to 'Normal Mode' */
+ writeb(0x00, &sc520_mmcr->drcctl);
+ }
+
+ writel(drcbendadr, &sc520_mmcr->drcbendadr);
+ writew(drccfg, &sc520_mmcr->drccfg);
+
+ /* Clear PARs preventing caching of SDRAM */
+ writel(0x00000000, &sc520_mmcr->par[3]);
+ writel(0x00000000, &sc520_mmcr->par[4]);
+}
+
+#if CONFIG_SYS_SDRAM_ECC_ENABLE
+static void sc520_enable_ecc(void)
+
+ /* A nominal memory test: just a byte at each address line */
+ movl %eax, %ecx
+ shrl $0x1, %ecx
+ movl $0x1, %edi
+memtest0:
+ movb $0xa5, (%edi)
+ cmpb $0xa5, (%edi)
+ jne out
+ shrl $0x1, %ecx
+ andl %ecx, %ecx
+ jz set_ecc
+ shll $0x1, %edi
+ jmp memtest0
+
+set_ecc:
+ /* clear all ram with a memset */
+ movl %eax, %ecx
+ xorl %esi, %esi
+ xorl %edi, %edi
+ xorl %eax, %eax
+ shrl $0x2, %ecx
+ cld
+ rep stosl
+
+ /* enable read, write buffers */
+ movb $0x11, %al
+ movl $DBCTL, %edi
+ movb %al, (%edi)
+
+ /* enable NMI mapping for ECC */
+ movl $ECCINT, %edi
+ movb $0x10, %al
+ movb %al, (%edi)
+
+ /* Turn on ECC */
+ movl $ECCCTL, %edi
+ movb $0x05, %al
+ movb %al,(%edi)
+
+out:
+ jmp init_ecc_ret
+}
+#endif
+
+int dram_init(void)
+{
+ ulong dram_ctrl;
+ ulong dram_present = 0x00000000;
+
+ /*
+ * We read-back the configuration of the dram
+ * controller that the assembly code wrote
+ */
+ dram_ctrl = readl(&sc520_mmcr->drcbendadr);
+
+ gd->bd->bi_dram[0].start = 0;
+ if (dram_ctrl & 0x80) {
+ /* bank 0 enabled */
+ gd->bd->bi_dram[1].start = (dram_ctrl & 0x7f) << 22;
+ dram_present = gd->bd->bi_dram[1].start;
+ gd->bd->bi_dram[0].size = gd->bd->bi_dram[1].start;
+ } else {
+ gd->bd->bi_dram[0].size = 0;
+ gd->bd->bi_dram[1].start = gd->bd->bi_dram[0].start;
+ }
+
+ if (dram_ctrl & 0x8000) {
+ /* bank 1 enabled */
+ gd->bd->bi_dram[2].start = (dram_ctrl & 0x7f00) << 14;
+ dram_present = gd->bd->bi_dram[2].start;
+ gd->bd->bi_dram[1].size = gd->bd->bi_dram[2].start -
+ gd->bd->bi_dram[1].start;
+ } else {
+ gd->bd->bi_dram[1].size = 0;
+ gd->bd->bi_dram[2].start = gd->bd->bi_dram[1].start;
+ }
+
+ if (dram_ctrl & 0x800000) {
+ /* bank 2 enabled */
+ gd->bd->bi_dram[3].start = (dram_ctrl & 0x7f0000) << 6;
+ dram_present = gd->bd->bi_dram[3].start;
+ gd->bd->bi_dram[2].size = gd->bd->bi_dram[3].start -
+ gd->bd->bi_dram[2].start;
+ } else {
+ gd->bd->bi_dram[2].size = 0;
+ gd->bd->bi_dram[3].start = gd->bd->bi_dram[2].start;
+ }
+
+ if (dram_ctrl & 0x80000000) {
+ /* bank 3 enabled */
+ dram_present = (dram_ctrl & 0x7f000000) >> 2;
+ gd->bd->bi_dram[3].size = dram_present -
+ gd->bd->bi_dram[3].start;
+ } else {
+ gd->bd->bi_dram[3].size = 0;
+ }
+
+ gd->ram_size = dram_present;
+
+ return 0;
+}
diff --git a/arch/x86/cpu/sc520/sc520_ssi.c b/arch/x86/cpu/sc520/sc520_ssi.c
new file mode 100644
index 0000000000..ac58d25970
--- /dev/null
+++ b/arch/x86/cpu/sc520/sc520_ssi.c
@@ -0,0 +1,92 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/ic/ssi.h>
+#include <asm/ic/sc520.h>
+
+int ssi_set_interface(int freq, int lsb_first, int inv_clock, int inv_phase)
+{
+ u8 temp=0;
+
+ if (freq >= 8192) {
+ temp |= CTL_CLK_SEL_4;
+ } else if (freq >= 4096) {
+ temp |= CTL_CLK_SEL_8;
+ } else if (freq >= 2048) {
+ temp |= CTL_CLK_SEL_16;
+ } else if (freq >= 1024) {
+ temp |= CTL_CLK_SEL_32;
+ } else if (freq >= 512) {
+ temp |= CTL_CLK_SEL_64;
+ } else if (freq >= 256) {
+ temp |= CTL_CLK_SEL_128;
+ } else if (freq >= 128) {
+ temp |= CTL_CLK_SEL_256;
+ } else {
+ temp |= CTL_CLK_SEL_512;
+ }
+
+ if (!lsb_first) {
+ temp |= MSBF_ENB;
+ }
+
+ if (inv_clock) {
+ temp |= CLK_INV_ENB;
+ }
+
+ if (inv_phase) {
+ temp |= PHS_INV_ENB;
+ }
+
+ writeb(temp, &sc520_mmcr->ssictl);
+
+ return 0;
+}
+
+u8 ssi_txrx_byte(u8 data)
+{
+ writeb(data, &sc520_mmcr->ssixmit);
+ while (readb(&sc520_mmcr->ssista) & SSISTA_BSY);
+ writeb(SSICMD_CMD_SEL_XMITRCV, &sc520_mmcr->ssicmd);
+ while (readb(&sc520_mmcr->ssista) & SSISTA_BSY);
+
+ return readb(&sc520_mmcr->ssircv);
+}
+
+void ssi_tx_byte(u8 data)
+{
+ writeb(data, &sc520_mmcr->ssixmit);
+ while (readb(&sc520_mmcr->ssista) & SSISTA_BSY);
+ writeb(SSICMD_CMD_SEL_XMIT, &sc520_mmcr->ssicmd);
+}
+
+u8 ssi_rx_byte(void)
+{
+ while (readb(&sc520_mmcr->ssista) & SSISTA_BSY);
+ writeb(SSICMD_CMD_SEL_RCV, &sc520_mmcr->ssicmd);
+ while (readb(&sc520_mmcr->ssista) & SSISTA_BSY);
+
+ return readb(&sc520_mmcr->ssircv);
+}
diff --git a/arch/x86/cpu/sc520/sc520_timer.c b/arch/x86/cpu/sc520/sc520_timer.c
new file mode 100644
index 0000000000..1bcfe67c94
--- /dev/null
+++ b/arch/x86/cpu/sc520/sc520_timer.c
@@ -0,0 +1,90 @@
+/*
+ * (C) Copyright 2008-2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/interrupt.h>
+#include <asm/ic/sc520.h>
+
+void sc520_timer_isr(void)
+{
+ /* Ack the GP Timer Interrupt */
+ writeb(0x02, &sc520_mmcr->gptmrsta);
+}
+
+int timer_init(void)
+{
+ /* Register the SC520 specific timer interrupt handler */
+ register_timer_isr (sc520_timer_isr);
+
+ /* Install interrupt handler for GP Timer 1 */
+ irq_install_handler (0, timer_isr, NULL);
+
+ /* Map GP Timer 1 to Master PIC IR0 */
+ writeb(0x01, &sc520_mmcr->gp_tmr_int_map[1]);
+
+ /* Disable GP Timers 1 & 2 - Allow configuration writes */
+ writew(0x4000, &sc520_mmcr->gptmr1ctl);
+ writew(0x4000, &sc520_mmcr->gptmr2ctl);
+
+ /* Reset GP Timers 1 & 2 */
+ writew(0x0000, &sc520_mmcr->gptmr1cnt);
+ writew(0x0000, &sc520_mmcr->gptmr2cnt);
+
+ /* Setup GP Timer 2 as a 100kHz (10us) prescaler */
+ writew(83, &sc520_mmcr->gptmr2maxcmpa);
+ writew(0xc001, &sc520_mmcr->gptmr2ctl);
+
+ /* Setup GP Timer 1 as a 1000 Hz (1ms) interrupt generator */
+ writew(100, &sc520_mmcr->gptmr1maxcmpa);
+ writew(0xe009, &sc520_mmcr->gptmr1ctl);
+
+ unmask_irq (0);
+
+ /* Clear the GP Timer 1 status register to get the show rolling*/
+ writeb(0x02, &sc520_mmcr->gptmrsta);
+
+ return 0;
+}
+
+/* Allow boards to override udelay implementation */
+void __udelay(unsigned long usec)
+ __attribute__((weak, alias("sc520_udelay")));
+
+void sc520_udelay(unsigned long usec)
+{
+ int m = 0;
+ long u;
+ long temp;
+
+ temp = readw(&sc520_mmcr->swtmrmilli);
+ temp = readw(&sc520_mmcr->swtmrmicro);
+
+ do {
+ m += readw(&sc520_mmcr->swtmrmilli);
+ u = readw(&sc520_mmcr->swtmrmicro) + (m * 1000);
+ } while (u < usec);
+}
diff --git a/arch/x86/cpu/start.S b/arch/x86/cpu/start.S
new file mode 100644
index 0000000000..7ccc076fec
--- /dev/null
+++ b/arch/x86/cpu/start.S
@@ -0,0 +1,132 @@
+/*
+ * U-boot - x86 Startup Code
+ *
+ * (C) Copyright 2008-2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/global_data.h>
+#include <asm/processor-flags.h>
+
+.section .text
+.code32
+.globl _start
+.type _start, @function
+.globl _x86boot_start
+_x86boot_start:
+ /*
+ * This is the fail safe 32-bit bootstrap entry point. The
+ * following code is not executed from a cold-reset (actually, a
+ * lot of it is, but from real-mode after cold reset. It is
+ * repeated here to put the board into a state as close to cold
+ * reset as necessary)
+ */
+ cli
+ cld
+
+ /* Turn of cache (this might require a 486-class CPU) */
+ movl %cr0, %eax
+ orl $(X86_CR0_NW | X86_CR0_CD), %eax
+ movl %eax, %cr0
+ wbinvd
+
+ /* Tell 32-bit code it is being entered from an in-RAM copy */
+ movw $GD_FLG_WARM_BOOT, %bx
+_start:
+ /* This is the 32-bit cold-reset entry point */
+
+ /* Load the segement registes to match the gdt loaded in start16.S */
+ movl $0x18, %eax
+ movw %ax, %fs
+ movw %ax, %ds
+ movw %ax, %gs
+ movw %ax, %es
+ movw %ax, %ss
+
+ /* Clear the interupt vectors */
+ lidt blank_idt_ptr
+
+ /* Early platform init (setup gpio, etc ) */
+ jmp early_board_init
+.globl early_board_init_ret
+early_board_init_ret:
+
+ /* Initialise Cache-As-RAM */
+ jmp car_init
+.globl car_init_ret
+car_init_ret:
+ /*
+ * We now have CONFIG_SYS_CAR_SIZE bytes of Cache-As-RAM (or SRAM,
+ * or fully initialised SDRAM - we really don't care which)
+ * starting at CONFIG_SYS_CAR_ADDR to be used as a temporary stack
+ */
+ movl $CONFIG_SYS_INIT_SP_ADDR, %esp
+
+ /* Set parameter to board_init_f() to boot flags */
+ xorl %eax, %eax
+ movw %bx, %ax
+
+ /* Enter, U-boot! */
+ call board_init_f
+
+ /* indicate (lack of) progress */
+ movw $0x85, %ax
+ jmp die
+
+.globl relocate_code
+.type relocate_code, @function
+relocate_code:
+ /*
+ * SDRAM has been initialised, U-Boot code has been copied into
+ * RAM, BSS has been cleared and relocation adjustments have been
+ * made. It is now time to jump into the in-RAM copy of U-Boot
+ *
+ * %eax = Address of top of stack
+ * %edx = Address of Global Data
+ * %ecx = Base address of in-RAM copy of U-Boot
+ */
+
+ /* Setup stack in RAM */
+ movl %eax, %esp
+
+ /* Setup call address of in-RAM copy of board_init_r() */
+ movl $board_init_r, %ebp
+ addl (GD_RELOC_OFF * 4)(%edx), %ebp
+
+ /* Setup parameters to board_init_r() */
+ movl %edx, %eax
+ movl %ecx, %edx
+
+ /* Jump to in-RAM copy of board_init_r() */
+ call *%ebp
+
+die: hlt
+ jmp die
+ hlt
+
+blank_idt_ptr:
+ .word 0 /* limit */
+ .long 0 /* base */
diff --git a/arch/x86/cpu/start16.S b/arch/x86/cpu/start16.S
new file mode 100644
index 0000000000..f1b9d0a0c9
--- /dev/null
+++ b/arch/x86/cpu/start16.S
@@ -0,0 +1,113 @@
+/*
+ * U-boot - x86 Startup Code
+ *
+ * (C) Copyright 2008-2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * (C) Copyright 2002,2003
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/global_data.h>
+#include <asm/processor-flags.h>
+
+#define BOOT_SEG 0xffff0000 /* linear segment of boot code */
+#define a32 .byte 0x67;
+#define o32 .byte 0x66;
+
+.section .start16, "ax"
+.code16
+.globl start16
+start16:
+ /* Set the Cold Boot / Hard Reset flag */
+ movl $GD_FLG_COLD_BOOT, %ebx
+
+ /*
+ * First we let the BSP do some early initialization
+ * this code have to map the flash to its final position
+ */
+ jmp board_init16
+.globl board_init16_ret
+board_init16_ret:
+
+ /* Turn of cache (this might require a 486-class CPU) */
+ movl %cr0, %eax
+ orl $(X86_CR0_NW & X86_CR0_CD), %eax
+ movl %eax, %cr0
+ wbinvd
+
+ /* load the temporary Global Descriptor Table */
+o32 cs lidt idt_ptr
+o32 cs lgdt gdt_ptr
+
+ /* Now, we enter protected mode */
+ movl %cr0, %eax
+ orl $X86_CR0_PE, %eax
+ movl %eax, %cr0
+
+ /* Flush the prefetch queue */
+ jmp ff
+ff:
+ /* Finally jump to the 32bit initialization code */
+ movw $code32start, %ax
+ movw %ax, %bp
+o32 cs ljmp *(%bp)
+
+ /* 48-bit far pointer */
+code32start:
+ .long _start /* offset */
+ .word 0x10 /* segment */
+
+idt_ptr:
+ .word 0 /* limit */
+ .long 0 /* base */
+
+/*
+ * The following Global Descriptor Table is just enough to get us into
+ * 'Flat Protected Mode' - It will be discarded as soon as the final
+ * GDT is setup in a safe location in RAM
+ */
+gdt_ptr:
+ .word 0x20 /* limit (32 bytes = 4 GDT entries) */
+ .long BOOT_SEG + gdt /* base */
+
+ /* The GDT table ...
+ *
+ * Selector Type
+ * 0x00 NULL
+ * 0x08 Unused
+ * 0x10 32bit code
+ * 0x18 32bit data/stack
+ */
+
+gdt:
+ .word 0, 0, 0, 0 /* NULL */
+ .word 0, 0, 0, 0 /* unused */
+
+ .word 0xFFFF /* 4Gb - (0x100000*0x1000 = 4Gb) */
+ .word 0 /* base address = 0 */
+ .word 0x9B00 /* code read/exec */
+ .word 0x00CF /* granularity = 4096, 386 (+5th nibble of limit) */
+
+ .word 0xFFFF /* 4Gb - (0x100000*0x1000 = 4Gb) */
+ .word 0x0 /* base address = 0 */
+ .word 0x9300 /* data read/write */
+ .word 0x00CF /* granularity = 4096, 386 (+5th nibble of limit) */
diff --git a/arch/x86/cpu/u-boot.lds b/arch/x86/cpu/u-boot.lds
new file mode 100644
index 0000000000..55974228b5
--- /dev/null
+++ b/arch/x86/cpu/u-boot.lds
@@ -0,0 +1,97 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
+OUTPUT_ARCH(i386)
+ENTRY(_start)
+
+SECTIONS
+{
+ . = CONFIG_SYS_TEXT_BASE; /* Location of bootcode in flash */
+ __text_start = .;
+ .text : { *(.text*); }
+
+ . = ALIGN(4);
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ . = ALIGN(4);
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(4);
+ .data : { *(.data*) }
+
+ . = ALIGN(4);
+ .dynsym : { *(.dynsym*) }
+
+ . = ALIGN(4);
+ .hash : { *(.hash*) }
+
+ . = ALIGN(4);
+ .got : { *(.got*) }
+
+ . = ALIGN(4);
+ __data_end = .;
+
+ . = ALIGN(4);
+ __bss_start = ABSOLUTE(.);
+ .bss (NOLOAD) : { *(.bss) }
+ . = ALIGN(4);
+ __bss_end = ABSOLUTE(.);
+
+ . = ALIGN(4);
+ __rel_dyn_start = .;
+ .rel.dyn : { *(.rel.dyn) }
+ __rel_dyn_end = .;
+
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
+
+ /* 16bit realmode trampoline code */
+ .realmode REALMODE_BASE : AT ( LOADADDR(.rel.dyn) + SIZEOF(.rel.dyn) ) { KEEP(*(.realmode)) }
+
+ __realmode_start = LOADADDR(.realmode);
+ __realmode_size = SIZEOF(.realmode);
+
+ /* 16bit BIOS emulation code (just enough to boot Linux) */
+ .bios 0 : AT ( LOADADDR(.realmode) + SIZEOF(.realmode) ) { KEEP(*(.bios)) }
+
+ __bios_start = LOADADDR(.bios);
+ __bios_size = SIZEOF(.bios);
+
+ /*
+ * The following expressions place the 16-bit Real-Mode code and
+ * Reset Vector at the end of the Flash ROM
+ */
+ . = START_16;
+ .start16 : AT (CONFIG_SYS_TEXT_BASE + (CONFIG_SYS_MONITOR_LEN - RESET_SEG_SIZE + START_16)) { KEEP(*(.start16)); }
+
+ . = RESET_VEC_LOC;
+ .resetvec : AT (CONFIG_SYS_TEXT_BASE + (CONFIG_SYS_MONITOR_LEN - RESET_SEG_SIZE + RESET_VEC_LOC)) { KEEP(*(.resetvec)); }
+}