summaryrefslogtreecommitdiff
path: root/Documentation/ABI/testing
AgeCommit message (Collapse)Author
2016-08-06Merge tag 'pwm/for-4.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This set of changes improve some aspects of the atomic API as well as make use of this new API in the regulator framework to allow properly dealing with critical regulators controlled by a PWM. Aside from that there's a bunch of updates and cleanups for existing drivers, as well as the addition of new drivers for the Broadcom iProc, STMPE and ChromeOS EC controllers" * tag 'pwm/for-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits) regulator: pwm: Document pwm-dutycycle-unit and pwm-dutycycle-range regulator: pwm: Support extra continuous mode cases pwm: Add ChromeOS EC PWM driver dt-bindings: pwm: Add binding for ChromeOS EC PWM mfd: cros_ec: Add EC_PWM function definitions mfd: cros_ec: Add cros_ec_cmd_xfer_status() helper pwm: atmel: Use of_device_get_match_data() pwm: atmel: Fix checkpatch warnings pwm: atmel: Fix disabling of PWM channels dt-bindings: pwm: Add R-Car H3 device tree bindings pwm: rcar: Use ARCH_RENESAS pwm: tegra: Add support for Tegra186 dt-bindings: pwm: tegra: Add compatible string for Tegra186 pwm: tegra: Avoid overflow when calculating duty cycle pwm: tegra: Allow 100 % duty cycle pwm: tegra: Add support for reset control pwm: tegra: Rename mmio_base to regs pwm: tegra: Remove useless padding pwm: tegra: Drop NUM_PWM macro pwm: lpc32xx: Set PWM_PIN_LEVEL bit to default value ...
2016-07-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Unified UDP encapsulation offload methods for drivers, from Alexander Duyck. 2) Make DSA binding more sane, from Andrew Lunn. 3) Support QCA9888 chips in ath10k, from Anilkumar Kolli. 4) Several workqueue usage cleanups, from Bhaktipriya Shridhar. 5) Add XDP (eXpress Data Path), essentially running BPF programs on RX packets as soon as the device sees them, with the option to mirror the packet on TX via the same interface. From Brenden Blanco and others. 6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet. 7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli. 8) Simplify netlink conntrack entry layout, from Florian Westphal. 9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido Schimmel, Yotam Gigi, and Jiri Pirko. 10) Add SKB array infrastructure and convert tun and macvtap over to it. From Michael S Tsirkin and Jason Wang. 11) Support qdisc packet injection in pktgen, from John Fastabend. 12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy. 13) Add NV congestion control support to TCP, from Lawrence Brakmo. 14) Add GSO support to SCTP, from Marcelo Ricardo Leitner. 15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni. 16) Support MPLS over IPV4, from Simon Horman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits) xgene: Fix build warning with ACPI disabled. be2net: perform temperature query in adapter regardless of its interface state l2tp: Correctly return -EBADF from pppol2tp_getname. net/mlx5_core/health: Remove deprecated create_singlethread_workqueue net: ipmr/ip6mr: update lastuse on entry change macsec: ensure rx_sa is set when validation is disabled tipc: dump monitor attributes tipc: add a function to get the bearer name tipc: get monitor threshold for the cluster tipc: make cluster size threshold for monitoring configurable tipc: introduce constants for tipc address validation net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update() MAINTAINERS: xgene: Add driver and documentation path Documentation: dtb: xgene: Add MDIO node dtb: xgene: Add MDIO node drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset drivers: net: xgene: Use exported functions drivers: net: xgene: Enable MDIO driver drivers: net: xgene: Add backward compatibility drivers: net: phy: xgene: Add MDIO driver ...
2016-07-27Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Kexec support for arm64 - Kprobes support - Expose MIDR_EL1 and REVIDR_EL1 CPU identification registers to sysfs - Trapping of user space cache maintenance operations and emulation in the kernel (CPU errata workaround) - Clean-up of the early page tables creation (kernel linear mapping, EFI run-time maps) to avoid splitting larger blocks (e.g. pmds) into smaller ones (e.g. ptes) - VDSO support for CLOCK_MONOTONIC_RAW in clock_gettime() - ARCH_HAS_KCOV enabled for arm64 - Optimise IP checksum helpers - SWIOTLB optimisation to only allocate/initialise the buffer if the available RAM is beyond the 32-bit mask - Properly handle the "nosmp" command line argument - Fix for the initialisation of the CPU debug state during early boot - vdso-offsets.h build dependency workaround - Build fix when RANDOMIZE_BASE is enabled with MODULES off * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (64 commits) arm64: arm: Fix-up the removal of the arm64 regs_query_register_name() prototype arm64: Only select ARM64_MODULE_PLTS if MODULES=y arm64: mm: run pgtable_page_ctor() on non-swapper translation table pages arm64: mm: make create_mapping_late() non-allocating arm64: Honor nosmp kernel command line option arm64: Fix incorrect per-cpu usage for boot CPU arm64: kprobes: Add KASAN instrumentation around stack accesses arm64: kprobes: Cleanup jprobe_return arm64: kprobes: Fix overflow when saving stack arm64: kprobes: WARN if attempting to step with PSTATE.D=1 arm64: debug: remove unused local_dbg_{enable, disable} macros arm64: debug: remove redundant spsr manipulation arm64: debug: unmask PSTATE.D earlier arm64: localise Image objcopy flags arm64: ptrace: remove extra define for CPSR's E bit kprobes: Add arm64 case in kprobe example module arm64: Add kernel return probes support (kretprobes) arm64: Add trampoline code for kretprobes arm64: kprobes instruction simulation support arm64: Treat all entry code as non-kprobe-able ...
2016-07-26Merge tag 'acpi-4.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "The new feaures here are the support for ACPI overlays (allowing ACPI tables to be loaded at any time from EFI variables or via configfs) and the LPI (Low-Power Idle) support. Also notable is the ACPI-based NUMA support for ARM64. Apart from that we have two new drivers, for the DPTF (Dynamic Power and Thermal Framework) power participant device and for the Intel Broxton WhiskeyCove PMIC, some more PMIC-related changes, support for the Boot Error Record Table (BERT) in APEI and support for platform-initiated graceful shutdown. Plus two new pieces of documentation and usual assorted fixes and cleanups in quite a few places. Specifics: - Support for ACPI SSDT overlays allowing Secondary System Description Tables (SSDTs) to be loaded at any time from EFI variables or via configfs (Octavian Purdila, Mika Westerberg). - Support for the ACPI LPI (Low-Power Idle) feature introduced in ACPI 6.0 and allowing processor idle states to be represented in ACPI tables in a hierarchical way (with the help of Processor Container objects) and support for ACPI idle states management on ARM64, based on LPI (Sudeep Holla). - General improvements of ACPI support for NUMA and ARM64 support for ACPI-based NUMA (Hanjun Guo, David Daney, Robert Richter). - General improvements of the ACPI table upgrade mechanism and ARM64 support for that feature (Aleksey Makarov, Jon Masters). - Support for the Boot Error Record Table (BERT) in APEI and improvements of kernel messages printed by the error injection code (Huang Ying, Borislav Petkov). - New driver for the Intel Broxton WhiskeyCove PMIC operation region and support for the REGS operation region on Broxton, PMIC code cleanups (Bin Gao, Felipe Balbi, Paul Gortmaker). - New driver for the power participant device which is part of the Dynamic Power and Thermal Framework (DPTF) and DPTF-related code reorganization (Srinivas Pandruvada). - Support for the platform-initiated graceful shutdown feature introduced in ACPI 6.1 (Prashanth Prakash). - ACPI button driver update related to lid input events generated automatically on initialization and system resume that have been problematic for some time (Lv Zheng). - ACPI EC driver cleanups (Lv Zheng). - Documentation of the ACPICA release automation process and the in-kernel ACPI AML debugger (Lv Zheng). - New blacklist entry and two fixes for the ACPI backlight driver (Alex Hung, Arvind Yadav, Ralf Gerbig). - Cleanups of the ACPI pci_slot driver (Joe Perches, Paul Gortmaker). - ACPI CPPC code changes to make it more robust against possible defects in ACPI tables and new symbol definitions for PCC (Hoan Tran). - System reboot code modification to execute the ACPI _PTS (Prepare To Sleep) method in addition to _TTS (Ocean He). - ACPICA-related change to carry out lock ordering checks in ACPICA if ACPICA debug is enabled in the kernel (Lv Zheng). - Assorted minor fixes and cleanups (Andy Shevchenko, Baoquan He, Bhaktipriya Shridhar, Paul Gortmaker, Rafael Wysocki)" * tag 'acpi-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits) ACPI: enable ACPI_PROCESSOR_IDLE on ARM64 arm64: add support for ACPI Low Power Idle(LPI) drivers: firmware: psci: initialise idle states using ACPI LPI cpuidle: introduce CPU_PM_CPU_IDLE_ENTER macro for ARM{32, 64} arm64: cpuidle: drop __init section marker to arm_cpuidle_init ACPI / processor_idle: Add support for Low Power Idle(LPI) states ACPI / processor_idle: introduce ACPI_PROCESSOR_CSTATE ACPI / DPTF: move int340x_thermal.c to the DPTF folder ACPI / DPTF: Add DPTF power participant driver ACPI / lpat: make it explicitly non-modular ACPI / dock: make dock explicitly non-modular ACPI / PCI: make pci_slot explicitly non-modular ACPI / PMIC: remove modular references from non-modular code ACPICA: Linux: Enable ACPI_MUTEX_DEBUG for Linux kernel ACPI: Rename configfs.c to acpi_configfs.c to prevent link error ACPI / debugger: Add AML debugger documentation ACPI: Add documentation describing ACPICA release automation ACPI: add support for loading SSDTs via configfs ACPI: add support for configfs efi / ACPI: load SSTDs from EFI variables ...
2016-07-12arm64: cpuinfo: Expose MIDR_EL1 and REVIDR_EL1 to sysfsSteve Capper
It can be useful for JIT software to be aware of MIDR_EL1 and REVIDR_EL1 to ascertain the presence of any core errata that could affect code generation. This patch exposes these registers through sysfs: /sys/devices/system/cpu/cpu$ID/regs/identification/midr_el1 /sys/devices/system/cpu/cpu$ID/regs/identification/revidr_el1 where $ID is the cpu number. For big.LITTLE systems, one can have a mixture of cores (e.g. Cortex A53 and Cortex A57), thus all CPUs need to be enumerated. If the kernel does not have valid information to populate these entries with, an empty string is returned to userspace. Cc: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Steve Capper <steve.capper@linaro.org> [suzuki.poulose@arm.com: ABI documentation updates, hotplug notifiers, kobject changes] Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-07-08ACPI: add support for loading SSDTs via configfsOctavian Purdila
New tables can be loaded by creating directories under /config/table/ and writing the AML code into the aml table attribute. Various table attributes will be readable once the table is successfully loaded. Unloading tables is not supported at the moment, but it can be easily implemented once ACPI loading functions provide a table handle to be used for unloading. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08ACPI: add support for configfsOctavian Purdila
Register the ACPI subsystem with configfs. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-01Merge tag 'batadv-next-for-davem-20160701' of ↵David S. Miller
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature patchset includes the following changes: - two patches with minimal clean up work by Antonio Quartulli and Simon Wunderlich - eight patches of B.A.T.M.A.N. V, API and documentation clean up work, by Antonio Quartulli and Marek Lindner - Andrew Lunn fixed the skb priority adoption when forwarding fragmented packets (two patches) - Multicast optimization support is now enabled for bridges which comes with some protocol updates, by Linus Luessing ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30iio:core: timestamping clock selection supportGregor Boirie
Adds a new per-device sysfs attribute "current_timestamp_clock" to allow userspace to select a particular POSIX clock for buffered samples and events timestamping. Following clocks, as listed in clock_gettime(2), are supported: CLOCK_REALTIME, CLOCK_MONOTONIC, CLOCK_MONOTONIC_RAW, CLOCK_REALTIME_COARSE, CLOCK_MONOTONIC_COARSE, CLOCK_BOOTTIME and CLOCK_TAI. Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com> Acked-by: Sanchayan Maity <maitysanchayan@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-30batman-adv: update elp interval documentationMarek Lindner
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: document sysfs files in alphabetical orderMarek Lindner
Also update obsolete email address. Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-20Merge 4.7-rc4 into staging-nextGreg Kroah-Hartman
We want the fixes in here, and we can resolve a merge issue in drivers/iio/industrialio-trigger.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-18Merge tag 'usb-4.7-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a bunch (65) of USB fixes for 4.7-rc4. Sorry about the quantity, I've been slow in getting these out. The majority are the "normal" gadget, musb, and xhci fixes, that we all are used to. There are also a few other tiny fixes resolving a number of reported issues that showed up in 4.7-rc1. All of these have been in linux-next" * tag 'usb-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (65 commits) usbip: rate limit get_frame_number message usb: musb: sunxi: Remove bogus "Frees glue" comment usb: musb: sunxi: Fix NULL ptr deref when gadget is registered before musb usb: echi-hcd: Add ehci_setup check before echi_shutdown usb: host: ehci-msm: Conditionally call ehci suspend/resume MAINTAINERS: Add file patterns for usb device tree bindings usb: host: ehci-tegra: Avoid getting the same reset twice usb: host: ehci-tegra: Grab the correct UTMI pads reset USB: mos7720: delete parport USB: OHCI: Don't mark EDs as ED_OPER if scheduling fails phy: ti-pipe3: Program the DPLL even if it was already locked usb: musb: Stop bulk endpoint while queue is rotated usb: musb: Ensure rx reinit occurs for shared_fifo endpoints usb: musb: host: correct cppi dma channel for isoch transfer usb: musb: only restore devctl when session was set in backup usb: phy: Check initial state for twl6030 usb: musb: Use normal module_init for 2430 glue usb: musb: Remove pm_runtime_set_irq_safe usb: musb: Remove extra PM runtime calls from 2430 glue layer usb: musb: Return error value from musb_mailbox ...
2016-06-10pwm: sysfs: Add PWM capture supportLee Jones
Allow a user to read PWM capture results from sysfs. To start a capture and read the result, simply read the file: $ cat $PWMCHIP/capture The output format is "<period> <duty cycle>". Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-06-09Merge tag 'iio-for-4.8a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First round of IIO new device support, features and cleanups for the 4.8 cycle. New device support * ads1015 - add ads1115 support * bma220 accelerometer - new driver - triggered buffer support. * bmc150 - add bmm150 support. * bmp280 - bme280 support with addition of humidity channel. * max5487 potentiometer - new driver * MMA7660FC accelerometer. - New driver * st-pressure - support for the lps22hb * loop trigger. - This one is *nasty* but we have real applications (parrot drones) where it is useful. The trigger basically spins as hard as it can firing off a new trigger each time all triggered devices come back to say they are done. It doesn't hang a machine even when doing it on a dummy driver. A lot nicer than having this implemented within lots of device drivers anyway. Core stuff * Add support to create IIO devices via configfs (similar to we did for triggers a while back) + docs. * New channel types - IIO_ELECTRICAL_CONDUCTIVITY * Couple of MAINTAINERS patches to list the device tree bindings. * Make trigger ops structure non optional (comment fix). It hasn't been for an awful long time, but that's not what the description said. New features * ak8975 - support adapters that are limited to byte data only by allowing the emulated block read i2c function that was recently introduced. * atlas-ph - support atlas-ec (electrical conductivity sensor) * bmi160 - add available frequency and scale attributes to make the driver more user friendly (and avoid having to read the datasheet to know what will work). * dummy - move creation to configfs interface. It's not real hardware so we are not that worried about the ABI breakage ;) * mma8452 - oversampling ration support * nau7802 - expose available gains to make life easier for userspace. * st-sensors - allow use of emulation for SMBus block reads as all the st parts support it. * ti-ads1015 - list datasheet names to allow their use by inkernel consumers. * Various module alias additions to help auto probing. Drop one redundant one as well. Cleanups * ad7266, ad7476, ad7887, ad7923, ad799x - use direct mode claim function rather than open coding it during sensor read (prevents switching on buffers mid read). * ad7793, ad7791 - use direct mode claim to prevent frequency changes when buffers running. * afe440x - These are ABI breaking but the driver requires custom userspace code to do anything useful anyway and that is still being written and under control of TI. Ultimately we may have other libraries to do pulse oximetry with these devices but we aren't aware of any yet. - kernel-doc format fixes - drop ifdef fun around of_match_ptr - it's not worth the mess to save a tiny amount of space. - drop some unnecessary register initializations. - drop the weird locked gain modes as they gain us nothing (can just set all gains separately). - remove handling of offset attributes seeing as no channels actually have them (oops) - Drop the LED3 input channel as it's an alias for ALED2. - *big one* remove channel names - an experiment that turned out to not make sense - see patch for details. - use regmap fields to clean up code. - tie the tia gain stages to appropriate channels in the ABI as that is what they really effect. Same with the LED currents. - cleanout some unused defines and fix a missnamed one. * atlas-ph - reorganise to allow support of other similar parts. * bmc150 - document supported chips in kconfig help. * jsa1212 - drop an unneeded i2c functionality check for functionality the driver doesn't use. * mxs-lradc - simply touch screen registration code. - remove the touch screen unregister as all devm based now. - disable only those channels that are masked in hardware stop (others are already dealt with elsewhere) * st-sensors - unexport st_sensors_get_buffer_element as nothing outside the st-sensors core driver uses it. - fix handling of failure to start up regulators. * tpl0102 - drop an i2c functionality test for features that aren't needed. * ti-am335x - use variable name rather than type in sizeof for clarity. - use SIMPLE_DEV_PM_OPS helper macro to tidy up a bit. Tools * Add install / uninstall to makefile. Someone cares, so presumably some people will find it useful! * generic_buffer - rename to iio_generic_buffer to line up with other tools. - handle cleanup when receiving signals - Add a --device-num option and a --trigger-num option rather than relying on naming which doesn't work if you have two of the same part.
2016-06-07Merge tag 'iio-fixes-for-4.7a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First round of iio fixes for the 4.7 cycle. A slightly bumper set due to travel delaying the pull request and a fair few issues with the recent merge window patches. Patches all over the place. The st-sensors one is probably the most involved, but definitly solves the issues seen. Note there are some other issues around that handler (and the fact that a lot of boards tie a level interrupt chip to an edge interrupt only irq chip). These are not regressions however, so will turn up the slow route. * core - iio_trigger_attach_pollfunc had some really badly wrong error handling. Another nasty triggered whilst chasing down issues with the st sensors rework below. * ad5592r - fix an off by one error when allocating channels. * am2315 - a stray mutex unlock before we ever take the lock. * apds9960 - missing a parent in the driver model (which should be the i2c device). Result is it doesn't turn up under /sys/bus/i2c/devices which some userspace code uses for repeatable device identification. * as3935 - ABI usage bug which meant a processed value was reported as raw. Now reporting scale as well to ensure userspace has the info it needs. - Don't return processed value via the buffer - it doesn't conform to the ABI and will overflow in some cases. - Fix a wrongly sized buffer which would overflow trashing part of the stack. Also move it onto the heap as part of the fix. * bh1780 - a missing return after write in debugfs lead to an incorrect read and a null pointer dereference. - dereferencing the wrong pointer in suspend and resume leading to unpredictable results. - assign a static name to avoid accidentally ending up with no name if loaded via device tree. * bmi160 - output data rate for the accelerometer was incorrectly reported. Fix it. - writing the output data rate was also wrong due to reverse parameters. * bmp280 - error message for wrong chip ID gave the wrong expected value. * hdc100x - mask for writing the integration time was wrong allowin g us to get 'stuck' in a particular value with no way back. - temperature reported in celsius rather than millicelsius as per the ABI. - Get rid of some incorrect data shifting which lead to readings being rather incorrect. * max44000 - drop scale attribute for proximity as it is an unscaled value (depends on what is in range rather than anything knowable at the detector). * st-pressure - ABI compliance fixes - units were wrong. * st-sensors - We introduced some nasty issues with the recent switch over to a a somewhat threaded handler in that we broke using a software trigger with these devices. Now do it properly. It's a larger patch than ideal for a fix, but the logic is straight forward. - Make sure the trigger is initialized before requesting the interrupt. This matters now the interrupt can be shared. Before it was ugly and wrong but short of flakey hardware could not be triggered. - Hammer down the dataready pin at boot - otherwise with really unlucky timing things could get interestingly wedged requiring a hard power down of the chip.
2016-05-31Documentation: configfs-usb-gadget-uvc: fix kernel versionAlexandre Belloni
v3.20 doesn't exist, it is actually v4.0. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-05-29iio: electricalconductivity: add IIO_ELECTRICALCONDUCTIVITY typeMatt Ranostay
Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-22iio: proximity: as3935: correct IIO_CHAN_INFO_RAW outputMatt Ranostay
IIO_CHAN_INFO_RAW was returning processed data which was incorrect. This also adds the IIO_CHAN_INFO_SCALE value to convert to a processed value. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-20Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: - the rest of MM - KASAN updates - procfs updates - exit, fork updates - printk updates - lib/ updates - radix-tree testsuite updates - checkpatch updates - kprobes updates - a few other misc bits * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits) samples/kprobes: print out the symbol name for the hooks samples/kprobes: add a new module parameter kprobes: add the "tls" argument for j_do_fork init/main.c: simplify initcall_blacklisted() fs/efs/super.c: fix return value checkpatch: improve --git <commit-count> shortcut checkpatch: reduce number of `git log` calls with --git checkpatch: add support to check already applied git commits checkpatch: add --list-types to show message types to show or ignore checkpatch: advertise the --fix and --fix-inplace options more checkpatch: whine about ACCESS_ONCE checkpatch: add test for keywords not starting on tabstops checkpatch: improve CONSTANT_COMPARISON test for structure members checkpatch: add PREFER_IS_ENABLED test lib/GCD.c: use binary GCD algorithm instead of Euclidean radix-tree: free up the bottom bit of exceptional entries for reuse dax: move RADIX_DAX_ definitions to dax.c radix-tree: make radix_tree_descend() more useful radix-tree: introduce radix_tree_replace_clear_tags() radix-tree: tidy up __radix_tree_create() ...
2016-05-20Merge tag 'staging-4.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver updates from Greg KH: "Here's the big staging and iio driver update for 4.7-rc1. I think we almost broke even with this release, only adding a few more lines than we removed, which isn't bad overall given that there's a bunch of new iio drivers added. The Lustre developers seem to have woken up from their sleep and have been doing a great job in cleaning up the code and pruning unused or old cruft, the filesystem is almost readable :) Other than that, just a lot of basic coding style cleanups in the churn. All have been in linux-next for a while with no reported issues" * tag 'staging-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (938 commits) Staging: emxx_udc: emxx_udc: fixed coding style issue staging/gdm724x: fix "alignment should match open parenthesis" issues staging/gdm724x: Fix avoid CamelCase staging: unisys: rename misleading var ii with frag staging: unisys: visorhba: switch success handling to error handling staging: unisys: visorhba: main path needs to flow down the left margin staging: unisys: visorinput: handle_locking_key() simplifications staging: unisys: visorhba: fail gracefully for thread creation failures staging: unisys: visornic: comment restructuring and removing bad diction staging: unisys: fix format string %Lx to %llx for u64 staging: unisys: remove unused struct members staging: unisys: visorchannel: correct variable misspelling staging: unisys: visorhba: replace functionlike macro with function staging: dgnc: Need to check for NULL of ch staging: dgnc: remove redundant condition check staging: dgnc: fix 'line over 80 characters' staging: dgnc: clean up the dgnc_get_modem_info() staging: lustre: lnet: enable configuration per NI interface staging: lustre: o2iblnd: properly set ibr_why staging: lustre: o2iblnd: remove last of kiblnd_tunables_fini ...
2016-05-20Merge tag 'char-misc-4.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here's the big char and misc driver update for 4.7-rc1. Lots of different tiny driver subsystems have updates here with new drivers and functionality. Details in the shortlog. All have been in linux-next with no reported issues for a while" * tag 'char-misc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (125 commits) mcb: Delete num_cells variable which is not required mcb: Fixed bar number assignment for the gdd mcb: Replace ioremap and request_region with the devm version mcb: Implement bus->dev.release callback mcb: export bus information via sysfs mcb: Correctly initialize the bus's device mei: bus: call mei_cl_read_start under device lock coresight: etb10: adjust read pointer only when needed coresight: configuring ETF in FIFO mode when acting as link coresight: tmc: implementing TMC-ETF AUX space API coresight: moving struct cs_buffers to header file coresight: tmc: keep track of memory width coresight: tmc: make sysFS and Perf mode mutually exclusive coresight: tmc: dump system memory content only when needed coresight: tmc: adding mode of operation for link/sinks coresight: tmc: getting rid of multiple read access coresight: tmc: allocating memory when needed coresight: tmc: making prepare/unprepare functions generic coresight: tmc: splitting driver in ETB/ETF and ETR components coresight: tmc: cleaning up header file ...
2016-05-20Merge tag 'usb-4.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big pull request for USB and PHY drivers for 4.7-rc1 Full details in the shortlog, but it's the normal major gadget driver updates, phy updates, new usbip code, as well as a bit of lots of other stuff. All have been in linux-next with no reported issues" * tag 'usb-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (164 commits) USB: serial: ti_usb_3410_5052: add MOXA UPORT 11x0 support USB: serial: fix minor-number allocation USB: serial: quatech2: fix use-after-free in probe error path USB: serial: mxuport: fix use-after-free in probe error path USB: serial: keyspan: fix debug and error messages USB: serial: keyspan: fix URB unlink USB: serial: keyspan: fix use-after-free in probe error path USB: serial: io_edgeport: fix memory leaks in probe error path USB: serial: io_edgeport: fix memory leaks in attach error path usb: Remove unnecessary space before operator ','. usb: Remove unnecessary space before open square bracket. USB: FHCI: avoid redundant condition usb: host: xhci-rcar: Avoid long wait in xhci_reset() usb/host/fotg210: remove dead code in create_sysfs_files usb: wusbcore: Do not initialise statics to 0. usb: wusbcore: Remove space before ',' and '(' . USB: serial: cp210x: clean up CRTSCTS flag code USB: serial: cp210x: get rid of magic numbers in CRTSCTS flag code USB: serial: cp210x: fix hardware flow-control disable USB: serial: option: add even more ZTE device ids ...
2016-05-20zram: introduce per-device debug_stat sysfs nodeSergey Senozhatsky
debug_stat sysfs is read-only and represents various debugging data that zram developers may need. This file is not meant to be used by anyone else: its content is not documented and will change any time w/o any notice. Therefore, the output of debug_stat file contains a version string. To avoid any confusion, we will increase the version number every time we modify the output. At the moment this file exports only one value -- the number of re-compressions, IOW, the number of times compression fast path has failed. This stat is temporary any will be useful in case if any per-cpu compression streams regressions will be reported. Link: http://lkml.kernel.org/r/20160513230834.GB26763@bbox Link: http://lkml.kernel.org/r/20160511134553.12655-1-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20Merge tag 'powerpc-4.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights: - Support for Power ISA 3.0 (Power9) Radix Tree MMU from Aneesh Kumar K.V - Live patching support for ppc64le (also merged via livepatching.git) Various cleanups & minor fixes from: - Aaro Koskinen, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Chris Smart, Daniel Axtens, Frederic Barrat, Gavin Shan, Ian Munsie, Lennart Sorensen, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Michael Ellerman, Oliver O'Halloran, Paul Gortmaker, Paul Mackerras, Rashmica Gupta, Russell Currey, Suraj Jitindar Singh, Thiago Jung Bauermann, Valentin Rothberg, Vipin K Parashar. General: - Update LMB associativity index during DLPAR add/remove from Nathan Fontenot - Fix branching to OOL handlers in relocatable kernel from Hari Bathini - Add support for userspace Power9 copy/paste from Chris Smart - Always use STRICT_MM_TYPECHECKS from Michael Ellerman - Add mask of possible MMU features from Michael Ellerman PCI: - Enable pass through of NVLink to guests from Alexey Kardashevskiy - Cleanups in preparation for powernv PCI hotplug from Gavin Shan - Don't report error in eeh_pe_reset_and_recover() from Gavin Shan - Restore initial state in eeh_pe_reset_and_recover() from Gavin Shan - Revert "powerpc/eeh: Fix crash in eeh_add_device_early() on Cell" from Guilherme G Piccoli - Remove the dependency on EEH struct in DDW mechanism from Guilherme G Piccoli selftests: - Test cp_abort during context switch from Chris Smart - Add several tests for transactional memory support from Rashmica Gupta perf: - Add support for sampling interrupt register state from Anju T - Add support for unwinding perf-stackdump from Chandan Kumar cxl: - Configure the PSL for two CAPI ports on POWER8NVL from Philippe Bergheaud - Allow initialization on timebase sync failures from Frederic Barrat - Increase timeout for detection of AFU mmio hang from Frederic Barrat - Handle num_of_processes larger than can fit in the SPA from Ian Munsie - Ensure PSL interrupt is configured for contexts with no AFU IRQs from Ian Munsie - Add kernel API to allow a context to operate with relocate disabled from Ian Munsie - Check periodically the coherent platform function's state from Christophe Lombard Freescale: - Updates from Scott: "Contains 86xx fixes, minor device tree fixes, an erratum workaround, and a kconfig dependency fix." * tag 'powerpc-4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (192 commits) powerpc/86xx: Fix PCI interrupt map definition powerpc/86xx: Move pci1 definition to the include file powerpc/fsl: Fix build of the dtb embedded kernel images powerpc/fsl: Fix rcpm compatible string powerpc/fsl: Remove FSL_SOC dependency from FSL_LBC powerpc/fsl-pci: Add a workaround for PCI 5 errata powerpc/fsl: Fix SPI compatible on t208xrdb and t1040rdb powerpc/powernv/npu: Add PE to PHB's list powerpc/powernv: Fix insufficient memory allocation powerpc/iommu: Remove the dependency on EEH struct in DDW mechanism Revert "powerpc/eeh: Fix crash in eeh_add_device_early() on Cell" powerpc/eeh: Drop unnecessary label in eeh_pe_change_owner() powerpc/eeh: Ignore handlers in eeh_pe_reset_and_recover() powerpc/eeh: Restore initial state in eeh_pe_reset_and_recover() powerpc/eeh: Don't report error in eeh_pe_reset_and_recover() Revert "powerpc/powernv: Exclude root bus in pnv_pci_reset_secondary_bus()" powerpc/powernv/npu: Enable NVLink pass through powerpc/powernv/npu: Rework TCE Kill handling powerpc/powernv/npu: Add set/unset window helpers powerpc/powernv/ioda2: Export debug helper pe_level_printk() ...
2016-05-19Merge tag 'docs-for-linus' of git://git.lwn.net/linuxLinus Torvalds
Pull Documentation updates from Jon Corbet: "A bit busier this time around. The most interesting thing (IMO) this time around is some beginning infrastructural work to allow documents to be written using restructured text. Maybe someday, in a galaxy far far away, we'll be able to eliminate the DocBook dependency and have a much better integrated set of kernel docs. Someday. Beyond that, there's a new document on security hardening from Kees, the movement of some sample code over to samples/, a number of improvements to the serial docs from Geert, and the usual collection of corrections, typo fixes, etc" * tag 'docs-for-linus' of git://git.lwn.net/linux: (55 commits) doc: self-protection: provide initial details serial: doc: Use port->state instead of info serial: doc: Always refer to tty_port->mutex Documentation: vm: Spelling s/paltform/platform/g Documentation/memcg: update kmem limit doc as codes behavior docproc: print a comment about autogeneration for rst output docproc: add support for reStructuredText format via --rst option docproc: abstract terminating lines at first space docproc: abstract docproc directive detection docproc: reduce unnecessary indentation docproc: add variables for subcommand and filename kernel-doc: use rst C domain directives and references for types kernel-doc: produce RestructuredText output kernel-doc: rewrite usage description, remove duplicated comments Doc: correct the location of sysrq.c Documentation: fix common spelling mistakes samples: v4l: from Documentation to samples directory samples: connector: from Documentation to samples directory Documentation: xillybus: fix spelling mistake Documentation: x86: fix spelling mistakes ...
2016-05-19Merge tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "This time round the update brings in following changes: - new tegra driver for ADMA device - support for Xilinx AXI Direct Memory Access Engine and Xilinx AXI Central Direct Memory Access Engine and few updates to this driver - new cyclic capability to sun6i and few updates - slave-sg support in bcm2835 - updates to many drivers like designware, hsu, mv_xor, pxa, edma, qcom_hidma & bam" * tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (84 commits) dmaengine: ioatdma: disable relaxed ordering for ioatdma dmaengine: of_dma: approximate an average distribution dmaengine: core: Use IS_ENABLED() instead of checking for built-in or module dmaengine: edma: Re-evaluate errors when ccerr is triggered w/o error event dmaengine: qcom_hidma: add support for object hierarchy dmaengine: qcom_hidma: add debugfs hooks dmaengine: qcom_hidma: implement lower level hardware interface dmaengine: vdma: Add clock support Documentation: DT: vdma: Add clock support for dmas dmaengine: vdma: Add config structure to differentiate dmas MAINTAINERS: Update Tegra DMA maintainers dmaengine: tegra-adma: Add support for Tegra210 ADMA Documentation: DT: Add binding documentation for NVIDIA ADMA dmaengine: vdma: Add Support for Xilinx AXI Central Direct Memory Access Engine Documentation: DT: vdma: update binding doc for AXI CDMA dmaengine: vdma: Add Support for Xilinx AXI Direct Memory Access Engine Documentation: DT: vdma: update binding doc for AXI DMA dmaengine: vdma: Rename xilinx_vdma_ prefix to xilinx_dma dmaengine: slave means at least one of DMA_SLAVE, DMA_CYCLIC dmaengine: mv_xor: Allow selecting mv_xor for mvebu only compatible SoC ...
2016-05-18Merge branch 'stable/for-linus-4.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft Pull iscsi_ibft updates from Konrad Rzeszutek Wilk: "The pull has two features - both of them expand the SysFS entries: - 'prefix-len' - which is subnet_mask_prefix of the iBFT header. - 'acpi_header' dir with: 'iBFT', OEM-ID (whatever it extracts from the iBFT header) and OEM_TABLE_ID (also whatever it extracts from the iBFT header). This is to help NIC drivers to figure out during bootup how to deal with BIOS created iBFT tables (like by TianoCore UEFI implemenation)" * 'stable/for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft: ibft: Expose iBFT acpi header via sysfs iscsi_ibft: Add prefix-len attr and display netmask
2016-05-16ibft: Expose iBFT acpi header via sysfsDavid Bond
Some ethernet adapter vendors are supplying products which support optional (payed license) features. On some adapters this includes a hardware iscsi initiator. The same adapters in a normal (no extra licenses) mode of operation can be used as a software iscsi initiator. In addition, software iscsi boot initiators are becoming a standard part of many vendors uefi implementations. This is creating difficulties during early boot/install determining the proper configuration method for these adapters when they are used as a boot device. The attached patch creates sysfs entries to expose information from the acpi header of the ibft table. This information allows for a method to easily determining if an ibft table was created by a ethernet card's firmware or the system uefi/bios. In the case of a hardware initiator this information in combination with the pci vendor and device id can be used to ascertain any vendor specific behaviors that need to be accommodated. Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: David Bond <dbond@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2016-05-14dmaengine: qcom_hidma: add support for object hierarchySinan Kaya
In order to create a relationship model between the channels and the management object, we are adding support for object hierarchy to the drivers. This patch simplifies the userspace application development. We will not have to traverse different firmware paths based on device tree or ACPI based kernels. No matter what flavor of kernel is used, objects will be represented as platform devices. The new layout is as follows: hidmam_10: hidma-mgmt@0x5A000000 { compatible = "qcom,hidma-mgmt-1.0"; ... hidma_10: hidma@0x5a010000 { compatible = "qcom,hidma-1.0"; ... } } The hidma_mgmt_init detects each instance of the hidma-mgmt-1.0 objects in device tree and calls into the channel driver to create platform devices for each child of the management object. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-05-04Documentation: iio: Add IIO software devices docsDaniel Baluta
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-04iio: health/afe440x: Make gain settings a modifier for the stagesAndrew F. Davis
Currently the TIA gain settings are exported to userspace as sysfs entries that do not clearly represent their internal relation to the sampling stages. The gain settings are enabled on a per-stage basis, this can be seen in figure 24 of the current AFE4404 datasheet. These gain settings should therefore be tied to the channels that are read during these stages. Make this change here. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-04iio: health/afe440x: Remove channel namesAndrew F. Davis
These AFEs have 4 ADC mesuring stages (called LED2, ALED2, LED1, and ALED1 in the datasheet), we map these as channels, these stages can serve different purposes depending on the application. For instance the AFE4404 has an additional LED (LED3), this LED can be timed to be active during stage 2 (or anystage, but the datasheet describes this case and the name of the stage reflects this use). This ability is used further in upcoming parts that tie the front-end gain and the LED timings together. For these reasons we remove explicit naming the channels. Without channel names it is best that the index numbers are in order to match the stage number, reorder the channel numbers. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-04iio: health/afe440x: Always use separate gain valuesAndrew F. Davis
Locking the two gain stages to the same setting adds no value for us, so initialize them as unlocked and remove the sysfs for unlocking them. This also allows us to greatly simplify showing and setting the gain registers. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-03mcb: export bus information via sysfsJohannes Thumshirn
Export information about the bus stored in the FPGA's header to userspace via sysfs, instead of hiding it in pr_debug()s from everyone. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Andreas Werner <andreas.werner@men.de> Tested-by: Andreas Werner <andreas.werner@men.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03coresight: tmc: adding sysFS management entriesMathieu Poirier
Adding management registers that convey implementation specific characteristics. Those are useful for trace configuration and collection along with general trouble shooting. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03coresight: stm: adding driver for CoreSight STM componentPratik Patel
This driver adds support for the STM CoreSight IP block, allowing any system compoment (HW or SW) to log and aggregate messages via a single entity. The CoreSight STM exposes an application defined number of channels called stimulus port. Configuration is done using entries in sysfs and channels made available to userspace via configfs. Signed-off-by: Pratik Patel <pratikp@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Michael Williams <michael.williams@arm.com> Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03stm class: Support devices that override software assigned mastersAlexander Shishkin
Some STM devices adjust software assigned master numbers depending on the trace source and its runtime state and whatnot. This patch adds a sysfs attribute to inform the trace-side software that master numbers assigned to software sources will not match those in the STP stream, so that, for example, master/channel allocation policy can be adjusted accordingly. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01coresight: etb10: splitting sysFS "status" entryMathieu Poirier
The sysFS "status" entry conveys a wealth of information about the status of the HW but goes agains the sysFS rule of one topic per file. This patch rectify the situation by adding read-only entries for each of the field formaly displayed by "status". The ABI documentation is kept up to date. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01coresight: etm4x: adding config and traceid registersMathieu Poirier
Adding new sysFS management interface to query the configuration and the traceid registers. Both are required to convey information to the perf cmd line tools when using ETMv4 tracers as PMU. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-28Documentation: ABI: Add doc for usbip-vudc attributesKrzysztof Opasiak
As vudc provides some new attributes using sysfs infrastructure, add a suitable documentation file for those attributes. Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-28Documentation: fix common spelling mistakesKees Cook
This fixes several spelling mistakes in the Documentation/ tree, which are caught by checkpatch.pl's spell checking. Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-04-26Merge tag 'iio-for-4.7b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing Jonathan writes: 2nd set of new device support, features and cleanup for IIO in the 4.7 cycle. Bit of a bumper set for new drivers but plenty of other stuff here as well! New device support * ad5592R ADC/DAC - new driver supporting ad5592r and ad5593r combined ADC/DAC and gpio chips. * Aosong am2315 relative humidity - new driver with triggered buffer support in follow up patch. * bmi160 imu - new driver * bmp280 - bmp180 support - note there is support in the misc/bmp085 driver. Intent is to remove that driver long term. * invensense mpu6050 - cleanup leading to explicit support of mpu9150 with a good few cleanups along the way. * Hope RF hp03 pressure and temperature sensor. - new driver * maxim DS1803 potentiometer - new driver * maxim max44000 light and proximity sensor - new driver built in a series of steps to support pretty much everything. * ROHM BH1780 light sensor - new driver. There is an existing driver in misc that this is pretty much intended to replace. The discussion on whether to support the non standard interface of that driver is some way is continuing. * st-gyro - lsm9ds0-gyro. The accel/magn side of this will take a while longer as extensions to the st library are needed for cases where two types of sensor share a single i2c address. * ti-adc081c - support the adc101c and adc121c * Vishay VEML6070 UV sensor - new driver. New features * core - devm_ APIs for channel_get and channel_get_all. The first user of these is the generic ADC based thermal driver. As it is going through the thermal tree these will be picked up as a patch to that next cycle as that is how the author preferred to do it. - mounting matrix support. This new core support allows devices to provide to userspace (typically from the device tree) allowing compensation for how the sensor is mounted on the device. First examples are on UAVs but it has a more mundane use on typical phone where the chip may be on the front or the back of the circuit board and soldered at any angle. Includes support for this ABI in ak8975 (which has an older interface, now deprecated) and mpu6050. * tools - add a -a option to enable all available channels in generic_buffer sample. Makes it somewhat easier to use. * adis library and drivers - support manual self test flag clearing. This has technically been broken for a very long time - result is an offset on readings as the applied field is on all the time. * ak8975 - triggered buffer support * bmc150 - spi support (including splitting the driver into core and i2c parts) * bmp280 - oversampling support. * dht11 - improved logging - useful to debug timing issues on this quirky device. * st-sensors - read each channel invidivually as not all support the optimization of reading in bulk. This is technically a fix, but will need to be backported if desired. - support open drain and shared interrupts. * ti-adc081c - triggered buffer support. Cleanups * inkern - white space fix. * ad7606 - use the iio_device_claim_direct_mode call rather than open coding equiv. * ad799x - white space fix. * ad9523 - unsigned -> unsigned int * apds9660 - brace location tidying up. - silence an uninitialized variable warning. * ak8975 - else and brace on same line fix. * at91_adc - white space fixes. * bmc150 - use regmap stored copy of the device pointer rather than having an additional copy. * bmg160 - use regmap stored copy of the device pointer rather than having an additional copy. * hid-sensors - white space fixes. * mcp3422 - white space fix. * mma7455 - use regmap to retrieve the device struct rather than carrying another copy in the private data. * ms_sensors - white space fix. * mxs-lradc - move current bindings out of staging - some will be shortly deprecated but the reality is that we have device trees out there using them so they will need to be supported for some time. They accidentally got left behind when the driver graduated from staging. - white space cleanup. - set INPUT_PROP_DIRECT. - move ts config into a better function. - move the STMP reset out of the ADC init. * vf610_adc - case label indenting fix.
2016-04-23iio:imu:mpu6050: enhance mounting matrix supportGregor Boirie
Add a new rotation matrix sysfs attribute compliant with IIO core mounting matrix API. Matrix is retrieved from "in_anglvel_mount_matrix" and "in_accel_mount_matrix" sysfs attributes. It is declared into mpu6050 DTS entry as a "mount-matrix" property. Old interface is kept for backward userspace compatibility and may be retrieved from legacy platform_data mechanism only. Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-23iio:core: mounting matrix supportGregor Boirie
Expose a rotation matrix to indicate userspace the chip placement with respect to the overall hardware system. This is needed to adjust coordinates sampled from a sensor chip when its position deviates from the main hardware system. Final coordinates computation is delegated to userspace since: * computation may involve floating point arithmetics ; * it allows an application to combine adjustments with arbitrary transformations. This 3 dimentional space rotation matrix is expressed as 3x3 array of strings to support floating point numbers. It may be retrieved from a "[<dir>_][<type>_]mount_matrix" sysfs attribute file. It is declared into a device / driver specific DTS property or platform data. Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-22cxl: Allow initialization on timebase sync failuresFrederic Barrat
Failure to synchronize the PSL timebase currently prevents the initialization of the cxl card, thus rendering the card useless. This is too extreme for a feature which is rarely used, if at all. No hardware AFUs or software is currently using PSL timebase. This patch still tries to synchronize the PSL timebase when the card is initialized, but ignores the error if it can't. Instead, it reports a status via /sys. Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-11Merge 4.6-rc3 into staging-nextGreg Kroah-Hartman
This resolves a lot of merge issues with PAGE_CACHE_* changes, and an iio driver merge issue. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-07i2c: mux: demux-pinctrl: Update docs to new sysfs-attributesWolfram Sang
Update the docs according to the recent code changes, too. Fixes: c0c508a418f9da ("i2c: mux: demux-pinctrl: Clean up sysfs attributes") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-04-04Merge tag 'iio-for-4.7a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First round of IIO new device support, features and cleanups for the 4.7 cycle. New core support * UV light modifier (for intensity) * UV light index channel type. New device support * hp206c barometer and altimeter - new driver. * mcp4131 potentiometer - new driver supporting lots of parts from Microchip. * mma8452 - FXLS8471Q support - NXP LPC18XX SOC ADC - new driver. - NXP LPC18XX SOC DAC - new driver. - rockchip_saradc - support rk3399 * st accel - h3lis331dl support Staging driver removals * adis16204 - obsolete part making it hard to get parts to test the driver in order to clean it up. * adis16220 - obsolete part making it hard to get the parts test the driver in order to clean it up. Features * core - convenience functions to claim / release direct access to the device. Makes more consistent handling of this corner easier. Used in ad7192 driver. * ak8975 - power regulator support. * at91-sama5d2 - differential channel support. * mma8452 - runtime pm support - drop device specific autosleep and use the runtime pm one instead. * ms5611 - DT bindings - oversampling ratio support Cleanups and minor fixes * MAINTAINERS - Peter got married - hence name change! * Documentation - Fix a typo in in_proximity_raw description. - Add some missing docs for iio_buffer_access_funcs. * Tools - update iio_event_monitor names to match new stuff. - make generic_buffer look for triggers ending in -trigger as we let these in for a number of drivers a long time back and now it is a fairly common option. Drivers * staging wide - convert bare unsigned usage to unsigned int to comply with coding style. * non staging wide: - since boiler plate gpio handling of interrupts has been moved into the ACPI core we don't need to include gpio/consumer.h in a load of drivers so drop it. * ad7606 - fix an endian casting sparse warning. * ak8975 - fix a possible unitialized warning from gcc. - drop and unused field left over from earlier cleanups - fix a missing regulator_disable on exit. * at91-sama5d2 - typo and indentation - missing IOMEM dependency. - cleanup mode register usage by avoidling erasing whole thing when changing the sampling frequency. * bmc150 - use the core demux and available_scan_masks to simplify buffer handling - optimize the transfers in the trigger handler now we have a magic function to emulate bulk reads (under circumstances met here). This matters with some rather dumb i2c adapters in particular. - use a single regmap_conf for all bus types as they were all the same. * bmg160 - use the core demux and available_scan_masks to simplify the buffer handling - optimize the transfers in the trigger handler now we have a magic funciton to emulate bulk rads (under circumstances met here). - drop gpio interrupt probing from the driver (ACPI) as now handled by the ACPI core. * ina2xx-adc - update the CALIB register when RShunt changes. - fix scale for VShunt - in reality this error canceled out when used. * isl29028 - use regmap to retrieve the struct device instead of carrying a second copy of it around. * kxcjk-1013 - use core demux - optimize i2c transfers in the trigger handler. * mcp4531 - refactor to use a pointer to access model parameters instead of indexing into the array each time. * mma8452 - style fixes - avoid swtiching to active whenever the config changes - add missin i2c_device_id for mma8451 * mpu6050 - fix possible NULL dereference. - fix the name / chip_id used when ACPI used (otherwise reports as NULL). * ms5611 - fix a missing regulator_disable that left the regulator on during removal. * mxc4005 - drop gpio interrupt handling for ACPI case from driver as the core now handles this case. * st-sensors - note that there are only ever a maximum of 3 axis on current st-sensors so just allocate a fixed sized buffer big enough for that. * tpl0102 - change the i2c_check_functionality condition to bring it inline with other IIO users as EOPNOTSUPP. * tsl2563 - replace deprecated flush_scheduled_work
2016-04-03iio: Add channel for UV indexPeter Meerwald-Stadler
UV index indicating strength of sunburn-producing ultraviolet (UV) radiation Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>