summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
authorSimon Guinot <simon.guinot@sequanux.org>2013-01-08 15:36:18 +0100
committerJason Cooper <jason@lakedaemon.net>2013-01-10 01:25:56 +0000
commit4ea931e07d7708bdf42cff31e27dcc5d307ab6f7 (patch)
treebd1dfed5e732ea31bd2703cbdb595df0b9339de0 /arch/arm
parent5f79c651e81e7731e9f252ac420bd81e144199d6 (diff)
ARM: Kirkwood: fix ns2 gpios by converting to pinctrl
Note that the pinctrl conversion also fixes GPIO support for ns2 boards. Since commit f9e75922: "ARM: Kirkwood: Make use of mvebu pincltl and gpio", the mvbu_gpio driver is used for DT boards. As mvbu_gpio relies on the pinctrl driver, then a pinctrl definition must be given to allow the GPIO configuration. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/boot/dts/kirkwood-ns2-common.dtsi16
-rw-r--r--arch/arm/mach-kirkwood/board-ns2.c38
2 files changed, 16 insertions, 38 deletions
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
index 9bc6785ad228..77d21abfcdf7 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -1,4 +1,5 @@
/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
/ {
chosen {
@@ -6,6 +7,21 @@
};
ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+ pinctrl-0 = < &pmx_spi &pmx_twsi0 &pmx_uart0
+ &pmx_ns2_sata0 &pmx_ns2_sata1>;
+ pinctrl-names = "default";
+
+ pmx_ns2_sata0: pmx-ns2-sata0 {
+ marvell,pins = "mpp21";
+ marvell,function = "sata0";
+ };
+ pmx_ns2_sata1: pmx-ns2-sata1 {
+ marvell,pins = "mpp20";
+ marvell,function = "sata1";
+ };
+ };
+
serial@12000 {
clock-frequency = <166666667>;
status = "okay";
diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
index 8821720ab5a4..f4632a809f68 100644
--- a/arch/arm/mach-kirkwood/board-ns2.c
+++ b/arch/arm/mach-kirkwood/board-ns2.c
@@ -18,47 +18,11 @@
#include <linux/gpio.h>
#include <linux/of.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data ns2_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
-static unsigned int ns2_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP4_NF_IO6,
- MPP5_NF_IO7,
- MPP6_SYSRST_OUTn,
- MPP7_GPO, /* Fan speed (bit 1) */
- MPP8_TW0_SDA,
- MPP9_TW0_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP12_GPO, /* Red led */
- MPP14_GPIO, /* USB fuse */
- MPP16_GPIO, /* SATA 0 power */
- MPP17_GPIO, /* SATA 1 power */
- MPP18_NF_IO0,
- MPP19_NF_IO1,
- MPP20_SATA1_ACTn,
- MPP21_SATA0_ACTn,
- MPP22_GPIO, /* Fan speed (bit 0) */
- MPP23_GPIO, /* Fan power */
- MPP24_GPIO, /* USB mode select */
- MPP25_GPIO, /* Fan rotation fail */
- MPP26_GPIO, /* USB device vbus */
- MPP28_GPIO, /* USB enable host vbus */
- MPP29_GPIO, /* Blue led (slow register) */
- MPP30_GPIO, /* Blue led (command register) */
- MPP31_GPIO, /* Board power off */
- MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */
- MPP33_GPO, /* Fan speed (bit 2) */
- 0
-};
-
#define NS2_GPIO_POWER_OFF 31
static void ns2_power_off(void)
@@ -71,8 +35,6 @@ void __init ns2_init(void)
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_mpp_conf(ns2_mpp_config);
-
if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
of_machine_is_compatible("lacie,netspace_mini_v2"))
ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);