summaryrefslogtreecommitdiff
path: root/arch/arm/boot
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2013-11-15 14:55:30 +0100
committerLinus Walleij <linus.walleij@linaro.org>2013-11-26 21:01:56 +0100
commit17afa716e63453f5ac7e24370dae38d1e8c7cac2 (patch)
tree86f935f15b558a59b46d76c63a507393907f94dd /arch/arm/boot
parent1c850e4a8ff518eb7877772755a1237b85c2fac7 (diff)
ARM: ux500: move final HREFv60 LCD pins to device tree
Put two extra configs into the device tree to handle the default configuration of the display reset signals on the HREFv60plus, move this over from the board file to the device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm/boot')
-rw-r--r--arch/arm/boot/dts/ste-hrefv60plus.dtsi17
1 files changed, 17 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index ecd26848f24f..25b4848e9a6a 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -102,6 +102,23 @@
};
};
};
+ mcde {
+ lcd_hrefv60_mode: lcd_hrefv60 {
+ /*
+ * Display Interface 1 uses GPIO 65 for RST (reset).
+ * Display Interface 2 uses GPIO 66 for RST (reset).
+ * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset)
+ */
+ hrefv60_cfg1 {
+ ste,pins ="GPIO65_F1";
+ ste,config = <&gpio_out_hi>;
+ };
+ hrefv60_cfg2 {
+ ste,pins ="GPIO66_G3";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
};
};
};