ARM: omap4-sdp.dts: add display information

Add DT data for OMAP4 SDP board. The board has the following displays:

lcd0: a command mode DSI panel connected to OMAP DSI1 encoder
lcd1: a command mode DSI panel connected to OMAP DSI2 encoder
hdmi: OMAP HDMI output with TPD12S015 ESD/level shifter

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>

1 files changed, 113 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 9bbbbec1d63d..48983c8d56c2 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -19,6 +19,12 @@
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 
+	aliases {
+		display0 = &lcd0;
+		display1 = &lcd1;
+		display2 = &hdmi0;
+	};
+
 	vdd_eth: fixedregulator-vdd-eth {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_ETH";
@@ -153,6 +159,48 @@
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
+
+	tpd12s015: encoder@0 {
+		compatible = "ti,tpd12s015";
+
+		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
+			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
+			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "c";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
 };
 
 &omap4_pmx_core {
@@ -569,3 +617,68 @@
 	mode = <3>;
 	power = <50>;
 };
+
+&dss {
+	status = "ok";
+};
+
+&dsi1 {
+	status = "ok";
+	vdd-supply = <&vcxio>;
+
+	port {
+		dsi1_out_ep: endpoint {
+			remote-endpoint = <&lcd0_in>;
+			lanes = <0 1 2 3 4 5>;
+		};
+	};
+
+	lcd0: display {
+		compatible = "tpo,taal", "panel-dsi-cm";
+		label = "lcd0";
+
+		reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;	/* 102 */
+
+		port {
+			lcd0_in: endpoint {
+				remote-endpoint = <&dsi1_out_ep>;
+			};
+		};
+	};
+};
+
+&dsi2 {
+	status = "ok";
+	vdd-supply = <&vcxio>;
+
+	port {
+		dsi2_out_ep: endpoint {
+			remote-endpoint = <&lcd1_in>;
+			lanes = <0 1 2 3 4 5>;
+		};
+	};
+
+	lcd1: display {
+		compatible = "tpo,taal", "panel-dsi-cm";
+		label = "lcd1";
+
+		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;	/* 104 */
+
+		port {
+			lcd1_in: endpoint {
+				remote-endpoint = <&dsi2_out_ep>;
+			};
+		};
+	};
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&vdac>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};