Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Arnd Bergmann:
 "These are all the updates to device tree files for 32-bit platforms,
  plus a couple of related 64-bit updates:

  New SoC support:
   - Allwinner A83T
   - Axis Artpec-6 SoC
   - Mediatek MT7623 SoC
   - TI Keystone K2G SoC
   - ST Microelectronics stm32f469

  New board or machine support:
   - ARM Juno R2
   - Buffalo Linkstation LS-QVL and LS-GL
   - Cubietruck plus
   - D-Link DIR-885L
   - DT support for ARM RealView PB1176 and PB11MPCore
   - Google Nexus 7
   - Homlet v2
   - Itead Ibox
   - Lamobo R1
   - LG Optimus Black
   - Logicpd dm3730
   - Raspberry Pi Model A

  Other changes include
   - Lots of updates for Qualcomm APQ8064, MSM8974 and others
   - Improved support for Nokia N900 and other OMAP machines
   - Common clk support for lpc32xx
   - HDLCD display on ARM
   - Improved stm32f429 support
   - Improved Renesas device support, r8a779x and others
   - Lots of Rockchip updates
   - Samsung cleanups
   - ADC support for Atmel SAMA5D2
   - BCM2835 (Raspberry Pi) improvements
   - Broadcom Northstar Plus enhancements
   - OMAP GPMC rework
   - Several improvements for Atmel SAMA5D2 / Xplained
   - Global change to remove inofficial "arm,amba-bus" compatible
     string"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (350 commits)
  ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus"
  ARM: dts: artpec: dual-license on artpec6.dtsi
  ARM: dts: ux500: add synaptics RMI4 for Ux500 TVK DT
  arm64: dts: juno/vexpress: fix node name unit-address presence warnings
  arm64: dts: foundation-v8: add SBSA Generic Watchdog device node
  ARM: dts: at91: sama5d2 Xplained: add leds node
  ARM: dts: at91: sama5d2 Xplained: add user push button
  ARM: dts: at91: sama5d2 Xplained: set pin muxing for usb gadget and usb host
  ARM: dts: stm32f429: Enable Ethernet on Eval board
  ARM: dts: omap3-sniper: TWL4030 keypad support
  Revert "ARM: dts: DRA7: Add dt nodes for PWMSS"
  ARM: dts: dm814x: dra62x: Disable wait pin monitoring for NAND
  ARM: dts: dm814x: dra62x: Fix NAND device nodes
  ARM: dts: stm32f429: Add Ethernet support
  ARM: dts: stm32f429: Add system config bank node
  ARM: dts: at91: sama5d2: add nand0 and nfc0 nodes
  ARM: dts: at91: sama5d2: add dma properties to UART nodes
  ARM: dts: at91: sama5d2 Xplained: Correct the macb irq pinctrl node
  ARM: dts: exynos: Don't overheat the Odroid XU3-Lite on high load
  ARM: dts: exynos: Add cooling levels for Exynos5422/5800 CPUs
  ...

1 files changed, 18 insertions, 18 deletions

diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index 466b01eb1038..fd75e5e9550f 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -44,8 +44,8 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Marvell Armada 385 GP";
-	compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380";
+	model = "Marvell Armada 388 DB-88F6820-GP";
+	compatible = "marvell,a388-gp", "marvell,armada388", "marvell,armada380";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -240,13 +240,13 @@
 
 			/* CON5 */
 			usb3@f0000 {
-				vcc-supply = <&reg_usb2_1_vbus>;
+				usb-phy = <&usb2_1_phy>;
 				status = "okay";
 			};
 
 			/* CON7 */
 			usb3@f8000 {
-				vcc-supply = <&reg_usb3_vbus>;
+				usb-phy = <&usb3_phy>;
 				status = "okay";
 			};
 		};
@@ -288,13 +288,22 @@
 		};
 	};
 
+	usb2_1_phy: usb2_1_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb2_1_vbus>;
+	};
+
+	usb3_phy: usb3_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb3_vbus>;
+	};
+
 	reg_usb3_vbus: usb3-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb3-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		enable-active-high;
-		regulator-always-on;
 		gpio = <&expander1 15 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -314,7 +323,6 @@
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		enable-active-high;
-		regulator-always-on;
 		gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -324,7 +332,7 @@
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
 		enable-active-high;
-		regulator-always-on;
+		regulator-boot-on;
 		gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -333,7 +341,6 @@
 		regulator-name = "v5.0-sata0";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata0>;
 	};
 
@@ -342,7 +349,6 @@
 		regulator-name = "v12.0-sata0";
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata0>;
 	};
 
@@ -352,7 +358,7 @@
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
 		enable-active-high;
-		regulator-always-on;
+		regulator-boot-on;
 		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -361,7 +367,6 @@
 		regulator-name = "v5.0-sata1";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata1>;
 	};
 
@@ -370,7 +375,6 @@
 		regulator-name = "v12.0-sata1";
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata1>;
 	};
 
@@ -378,7 +382,7 @@
 		compatible = "regulator-fixed";
 		regulator-name = "pwr_en_sata2";
 		enable-active-high;
-		regulator-always-on;
+		regulator-boot-on;
 		gpio = <&expander0 11 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -387,7 +391,6 @@
 		regulator-name = "v5.0-sata2";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata2>;
 	};
 
@@ -396,7 +399,6 @@
 		regulator-name = "v12.0-sata2";
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata2>;
 	};
 
@@ -404,7 +406,7 @@
 		compatible = "regulator-fixed";
 		regulator-name = "pwr_en_sata3";
 		enable-active-high;
-		regulator-always-on;
+		regulator-boot-on;
 		gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -413,7 +415,6 @@
 		regulator-name = "v5.0-sata3";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata3>;
 	};
 
@@ -422,7 +423,6 @@
 		regulator-name = "v12.0-sata3";
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata3>;
 	};
 };