Merge branch 'pci/host-layerscape' into next

* pci/host-layerscape:
  PCI: layerscape: Add ls_pcie_msi_host_init()
  PCI: layerscape: Add support for LS1043a and LS2080a
  PCI: layerscape: Remove unused fields from struct ls_pcie
  PCI: layerscape: Update ls_add_pcie_port()
  PCI: layerscape: Factor out SCFG related function
  PCI: layerscape: Ignore PCIe controllers in Endpoint mode
  PCI: layerscape: Remove ls_pcie_establish_link()

1 files changed, 12 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index 6286f049bf18..e3767857d30d 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -1,10 +1,20 @@
 Freescale Layerscape PCIe controller
 
-This PCIe host controller is based on the Synopsis Designware PCIe IP
+This PCIe host controller is based on the Synopsys DesignWare PCIe IP
 and thus inherits all the common properties defined in designware-pcie.txt.
 
+This controller derives its clocks from the Reset Configuration Word (RCW)
+which is used to describe the PLL settings at the time of chip-reset.
+
+Also as per the available Reference Manuals, there is no specific 'version'
+register available in the Freescale PCIe controller register set,
+which can allow determining the underlying DesignWare PCIe controller version
+information.
+
 Required properties:
-- compatible: should contain the platform identifier such as "fsl,ls1021a-pcie"
+- compatible: should contain the platform identifier such as:
+        "fsl,ls1021a-pcie", "snps,dw-pcie"
+        "fsl,ls2080a-pcie", "snps,dw-pcie"
 - reg: base addresses and lengths of the PCIe controller
 - interrupts: A list of interrupt outputs of the controller. Must contain an
   entry for each entry in the interrupt-names property.