| Age | Commit message (Collapse) | Author |
|---|
|
When patching-in alternative sequences during bootup, we copy
the alt-seq instructions to one or more target locations.
This relocation requires a fixup of references to symbols,
if they are outside of the alt-seq.
The decision if a fixup is required is implemented in the function
branch_insn_requires_update(), which checks if the given address
is in kernel-text (e.g. functions).
This patch renames the function to address_needs_relocation_fixup()
and also supports symbols in kernel-data (e.g. global variables).
This allows adrp to address such symbols, which is required for
e.g. ARM64_MISMATCHED_CACHE_LINE_SIZE.
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
Enabling retpoline in KVM's HYP part leads to CPU stalls, because
we execute code, which might not have a valid stack pointer to
write to.
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
This patch enables GENERIC_CPU_VULNERABILITIES on arm64 and
sets the spectre v2 status depending on the retpoline mitigation level.
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
This reduces the impact of retpoline on non-affected processors.
By default the retpoline will consist of 6 nop instructions.
In case an affected processor is detected (by a MIDR match)
the nops will be replaced by the retpoline.
The processors, which are using this are Applied Micro's X-Gene1, X-Gene2,
X-Gene3, and Ampere Computing's eMAG1.
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
When using adr or adrp with an offset within the alt block,
we can allow the instruction and we must not do any offset fixup.
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
This adds support for getting and setting the offset
of an `adr` instruction.
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
Replace indirect branch instructions (br and blr) by
*_nospec variants, which prevent speculative execution
in case CONFIG_RETPOLINE is enabled.
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
Enable the use of -mindirect-branch=thunk-extern in newer GCC, and
provide the corresponding thunks. Provide assembler macros for invoking the
thunks in the same way that GCC does, from native and inline assembler.
The integration is inspired by the x86 retpoline support.
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
This patch moves the definition of RETPOLINE_CFLAGS*
into the arch specific Makefile to allow other architectures
to define their own retpoline CFLAGS.
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
* arm64: dts: apm: Add serial 1 to shadowcat.dts
* arm64: dts: Add apm-gryphon.dts
* drivers: xgene: Allow to run the ethernet controller in MAC-to-MAC mode.
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
|
|
The intention of the ILP32 branches is to enable ILP32 by default. This
default is to be revisited for upstream merging.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
|
|
This patch adds the config option for ILP32.
Signed-off-by: Andrew Pinski <Andrew.Pinski@caviumnetworks.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Reviewed-by: David Daney <ddaney@caviumnetworks.com>
|
|
ILP32 VDSO exports following symbols:
__kernel_rt_sigreturn;
__kernel_gettimeofday;
__kernel_clock_gettime;
__kernel_clock_getres.
What shared object to use, kernel selects depending on result of
is_ilp32_compat_task() in arch/arm64/kernel/vdso.c, so it substitutes
correct pages and spec.
Adjusted to move the data page before code pages in sync with
commit 601255ae3c98 ("arm64: vdso: move data page before code pages")
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Bamvor Jian Zhang <bamv2005@gmail.com>
|
|
ILP32 has context-related structures different from both aarch32 and
aarch64/lp64. In this patch compat_arch_ptrace() renamed to
compat_a32_ptrace(), and compat_arch_ptrace() only makes choice between
compat_a32_ptrace() and new compat_ilp32_ptrace() handler.
compat_ilp32_ptrace() calls generic compat_ptrace_request() for all
requests except PTRACE_GETSIGMASK and PTRACE_SETSIGMASK, which need
special handling.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Bamvor Jian Zhang <bamv2005@gmail.com>
Signed-off-by: Chengming Zhou <zhouchengming1@huawei.com>
|
|
ILP32 uses AARCH32 compat structures and syscall handlers for signals. But
ILP32 rt_sigframe and ucontext structures differ from both LP64 and AARCH32.
From software point of view ILP32 is typical 32-bit compat ABI, and from
hardware point of view, it's just like LP64.
struct rt_sigframe defined in this patch in
arch/arm64/kernel/signal_ilp32.c redefines one in
arch/arm64/kernel/signal.c. And functions located in
arch/arm64/include/signal_common.h pick up new structure to generate the
code suitable for ILP32.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
|
|
ILP32 needs to mix 32bit struct siginfo and 64bit sigframe for its signal
handlers. Move the existing compat code for copying siginfo to user space
and manipulating signal masks into signal32_common.c so it can be used to
deliver aarch32 and ilp32 signals.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
|
|
Following patches of the series introduce ILP32-specific structures and
handlers for signal subsystem. In this patch, functions and structures
that common for LP64 and ILP32 are moved to
arch/arm64/include/asm/signal_common.h to let ILP32 code reuse them. Some
functions work with struct rt_sigframe which differs for ILP32. Therefore,
to let ILP32 generate correct code, body of that functions are moved to
arch/arm64/include/asm/signal_common.h. Others just declared in new header.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
|
|
Add a separate syscall-table for ILP32, which dispatches either to native
LP64 system call implementation or to compat-syscalls, as appropriate.
Signed-off-by: Andrew Pinski <Andrew.Pinski@caviumnetworks.com>
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Bamvor Jian Zhang <bamv2005@gmail.com>
|
|
According to userspace/kernel ABI, userspace off_t is passed in register
pair just like in aarch32. In this patch corresponding aarch32 handlers
are shared to ilp32 code.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
|
|
Like binfmt_elf32.c for AARCH32, binfmt_ilp32.c is needed to handle
ILP32 binaries.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Bamvor Jian Zhang <bamv2005@gmail.com>
|
|
ILP32 patch series introduces new type of binaries which is also compat.
So rename existung aarch32 compat_elf_hwcap's helps to avoid confusing.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
|
|
As we support more than one compat formats, it looks more reasonable
to not use fs/compat_binfmt.c. Custom binfmt_elf32.c allows to move aarch32
specific definitions there and make code more maintainable and readable.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
|
|
ILP32 tasks are needed to be distinguished from LP64 and AARCH32.
This patch adds helper functions is_ilp32_compat_{task,thread} and
thread flag TIF_32BIT_AARCH64 to address it. This is a preparation
for following patches in ILP32 patchset.
For consistency, SET_PERSONALITY is changed here accordingly.
Signed-off-by: Andrew Pinski <Andrew.Pinski@caviumnetworks.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Reviewed-by: David Daney <ddaney@caviumnetworks.com>
|
|
Based on patch of Andrew Pinski.
This patch introduces is_a32_compat_task and is_a32_thread so it is
easier to say this is a a32 specific thread or a generic compat
thread/task. Corresponding functions are located in <asm/is_compat.h>
to avoid mess in headers.
Some files include both <linux/compat.h> and <asm/compat.h>,
and this is wrong because <linux/compat.h> has <asm/compat.h> already
included. It was fixed too.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Andrew Pinski <Andrew.Pinski@caviumnetworks.com>
Signed-off-by: Bamvor Jian Zhang <bamv2005@gmail.com>
|
|
Define __BITS_PER_LONG depending on the ABI used (i.e. check whether
__ILP32__ or __LP64__ is defined). This is necessary for glibc to
determine the appropriate type definitions for the system call interface.
Signed-off-by: Andrew Pinski <apinski@cavium.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Reviewed-by: David Daney <ddaney@caviumnetworks.com>
|
|
The ILP32 for ARM64 patch series introduces another 'compat' mode for
arm64. So to avoid confusing, aarch32-only functions renamed in according
to it.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
|
|
In this patchset ILP32 ABI support is added. Additionally to AARCH32,
which is binary-compatible with ARM, ILP32 is (mostly) ABI-compatible.
From now, AARCH32_EL0 (former COMPAT) config option means the support of
AARCH32 userspace, and ARM64_ILP32 - support of ILP32 ABI (see following
patches), and COMPAT indicates that one of them or both is enabled.
Where needed, CONFIG_COMPAT is changed over to use CONFIG_AARCH32_EL0
instead.
Reviewed-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Andrew Pinski <Andrew.Pinski@caviumnetworks.com>
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Bamvor Jian Zhang <bamv2005@gmail.com>
|
|
Based on Andrew Pinski's patch-series.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
|
|
Thread bits may be accessed from low-level code, so isolating is a measure
to avoid circular dependencies in header files.
The exact reason for circular dependency is WARN_ON() macro added in patch
edd63a27 "set_restore_sigmask() is never called without SIGPENDING (and
never should be)"
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
|
|
The newer prlimit64 syscall provides all the functionality provided by
the getrlimit and setrlimit syscalls and adds the pid of target process,
so future architectures won't need to include getrlimit and setrlimit.
Therefore drop getrlimit and setrlimit syscalls from the generic syscall
list unless __ARCH_WANT_SET_GET_RLIMIT is defined by the architecture's
unistd.h prior to including asm-generic/unistd.h, and adjust all
architectures using the generic syscall list to define it so that no
in-tree architectures are affected.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: linux-c6x-dev@linux-c6x.org
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: linux-hexagon@vger.kernel.org
Cc: linux-metag@vger.kernel.org
Cc: Jonas Bonn <jonas@southpole.se>
Cc: linux@lists.openrisc.net
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: nios2-dev@lists.rocketboards.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: uclinux-h8-devel@lists.sourceforge.jp
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Salter <msalter@redhat.com> [c6x]
Acked-by: James Hogan <james.hogan@imgtec.com> [metag]
Acked-by: Ley Foon Tan <lftan@altera.com> [nios2]
Acked-by: Stafford Horne <shorne@gmail.com> [openrisc]
Acked-by: Will Deacon <will.deacon@arm.com> [arm64]
Acked-by: Vineet Gupta <vgupta@synopsys.com> #arch/arc bits
|
|
All new 32-bit architectures should have 64-bit userspace off_t type, but
existing architectures has 32-bit ones.
To enforce the rule, new config option is added to arch/Kconfig that defaults
ARCH_32BIT_OFF_T to be disabled for new 32-bit architectures. All existing
32-bit architectures enable it explicitly.
New option affects force_o_largefile() behaviour. Namely, if userspace
off_t is 64-bits long, we have no reason to reject user to open big files.
Note that even if architectures has only 64-bit off_t in the kernel
(arc, c6x, h8300, hexagon, metag, nios2, openrisc, tile32 and unicore32),
a libc may use 32-bit off_t, and therefore want to limit the file size
to 4GB unless specified differently in the open flags.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
|
|
The only difference between native and compat openat and open_by_handle_at
is that non-compat version forces O_LARGEFILE, and it should be the
default behaviour for all architectures, as we are going to drop the
support of 32-bit userspace off_t.
The exception is tile32 that continues with compat version of syscalls.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Chris Metcalf <cmetcalf@ezchip.com> [for tile]
|
|
compat_ptrace_request() lacks handlers for PTRACE_{G,S}ETSIGMASK,
instead using those in ptrace_request(). The compat variant should
read a compat_sigset_t from userspace instead of ptrace_request()s
sigset_t.
While compat_sigset_t is the same size as sigset_t, it is defined as
2xu32, instead of a single u64. On a big-endian CPU this means that
compat_sigset_t is passed to user-space using middle-endianness,
where the least-significant u32 is written most significant byte
first.
If ptrace_request()s code is used userspace will read the most
significant u32 where it expected the least significant.
Instead of duplicating ptrace_request()s code as a special case in
the arch code, handle it here.
Fixes: 29000caecbe87 ("ptrace: add ability to get/set signal-blocked mask")
CC: Andrey Vagin <avagin@openvz.org>
Reported-by: Zhou Chengming <zhouchengming1@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Yury:
Replace sigset_{to,from}_compat() with new {get,put}_compat_sigset()
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
|
|
ILP32 uses the same struct sigcontext as the native ABI (i.e.,
LP64), but a different layout for the rest of the signal frame (since
siginfo_t and ucontext_t are both ABI-dependent).
Since the purpose of parse_user_sigframe() is really to parse sigcontext
and not the whole signal frame, the function does not need to depend
on the layout of rt_sigframe -- the only purpose of the rt_sigframe
pointer is for use as a base to measure the signal frame size.
So, this patch renames the function to make it clear that only the
sigcontext is really being parsed, and makes the sigframe base pointer
generic. A macro is defined to provide a suitable duck-typed interface
that can be used with both sigframe definitions.
Suggested-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
|
|
|
|
[ Upstream commit 82d632b85eb89f97051530f556cb49ee1c04bde7 ]
Fix the following warning in MIPS allmodconfig by adding a
MODULE_LICENSE() at the end of rtc-goldfish.c, based on the file header
comment which says GNU General Public License version 2:
WARNING: modpost: missing MODULE_LICENSE() in drivers/rtc/rtc-goldfish.o
Fixes: f22d9cdcb5eb ("rtc: goldfish: Add RTC driver for Android emulator")
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: linux-rtc@vger.kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bcdd559268039d8340d38fa58668393596e29fdc ]
The probe function is not allowed to fail after registering the RTC because
the following may happen:
CPU0: CPU1:
sys_load_module()
do_init_module()
do_one_initcall()
cmos_do_probe()
rtc_device_register()
__register_chrdev()
cdev->owner = struct module*
open("/dev/rtc0")
rtc_device_unregister()
module_put()
free_module()
module_free(mod->module_core)
/* struct module *module is now
freed */
chrdev_open()
spin_lock(cdev_lock)
cdev_get()
try_module_get()
module_is_live()
/* dereferences already
freed struct module* */
Switch to devm_rtc_allocate_device/rtc_register_device to register the rtc
as late as possible.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 347876ad47b9923ce26e686173bbf46581802ffa ]
The shifting of buf[5] by 24 bits to the left will be promoted to
a 32 bit signed int and then sign-extended to an unsigned long. If
the top bit of buf[5] is set then all then all the upper bits sec
end up as also being set because of the sign-extension. Fix this by
casting buf[5] to an unsigned long before the shift.
Detected by CoverityScan, CID#1465292 ("Unintended sign extension")
Fixes: 0e1492330cd2 ("rtc: add rtc-tx4939 driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 10d0c768cc6d581523d673b9d1b54213f8a5eb24 ]
The IRQ is requested before the struct rtc is allocated and registered, but
this struct is used in the IRQ handler, leading to:
Unable to handle kernel NULL pointer dereference at virtual address 0000017c
pgd = a38a2f9b
[0000017c] *pgd=00000000
Internal error: Oops: 5 [#1] ARM
Modules linked in:
CPU: 0 PID: 613 Comm: irq/48-m41t80 Not tainted 4.16.0-rc1+ #42
Hardware name: Atmel SAMA5
PC is at mutex_lock+0x14/0x38
LR is at m41t80_handle_irq+0x1c/0x9c
pc : [<c06e864c>] lr : [<c04b70f0>] psr: 20000013
sp : dec73f30 ip : 00000000 fp : dec56d98
r10: df437cf0 r9 : c0a03008 r8 : c0145ffc
r7 : df5c4300 r6 : dec568d0 r5 : df593000 r4 : 0000017c
r3 : df592800 r2 : 60000013 r1 : df593000 r0 : 0000017c
Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c53c7d Table: 20004059 DAC: 00000051
Process irq/48-m41t80 (pid: 613, stack limit = 0xb52d091e)
Stack: (0xdec73f30 to 0xdec74000)
3f20: dec56840 df5c4300 00000001 df5c4300
3f40: c0145ffc c0146018 dec56840 ffffe000 00000001 c0146290 dec567c0 00000000
3f60: c0146084 ed7c9a62 c014615c dec56d80 dec567c0 00000000 dec72000 dec56840
3f80: c014615c c012ffc0 dec72000 dec567c0 c012fe80 00000000 00000000 00000000
3fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000
3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 29282726 2d2c2b2a
[<c06e864c>] (mutex_lock) from [<c04b70f0>] (m41t80_handle_irq+0x1c/0x9c)
[<c04b70f0>] (m41t80_handle_irq) from [<c0146018>] (irq_thread_fn+0x1c/0x54)
[<c0146018>] (irq_thread_fn) from [<c0146290>] (irq_thread+0x134/0x1c0)
[<c0146290>] (irq_thread) from [<c012ffc0>] (kthread+0x140/0x148)
[<c012ffc0>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
Exception stack(0xdec73fb0 to 0xdec73ff8)
3fa0: 00000000 00000000 00000000 00000000
3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
Code: e3c33d7f e3c3303f f5d0f000 e593300c (e1901f9f)
---[ end trace 22b027302eb7c604 ]---
genirq: exiting task "irq/48-m41t80" (613) is an active IRQ thread (irq 48)
Also, there is another possible race condition. The probe function is not
allowed to fail after the RTC is registered because the following may
happen:
CPU0: CPU1:
sys_load_module()
do_init_module()
do_one_initcall()
cmos_do_probe()
rtc_device_register()
__register_chrdev()
cdev->owner = struct module*
open("/dev/rtc0")
rtc_device_unregister()
module_put()
free_module()
module_free(mod->module_core)
/* struct module *module is now
freed */
chrdev_open()
spin_lock(cdev_lock)
cdev_get()
try_module_get()
module_is_live()
/* dereferences already
freed struct module* */
Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
before requesting the IRQ and register it as late as possible.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 201fac95e799c3d0304ec724d555e1251b9f6e84 ]
The probe function is not allowed to fail after registering the RTC because
the following may happen:
CPU0: CPU1:
sys_load_module()
do_init_module()
do_one_initcall()
cmos_do_probe()
rtc_device_register()
__register_chrdev()
cdev->owner = struct module*
open("/dev/rtc0")
rtc_device_unregister()
module_put()
free_module()
module_free(mod->module_core)
/* struct module *module is now
freed */
chrdev_open()
spin_lock(cdev_lock)
cdev_get()
try_module_get()
module_is_live()
/* dereferences already
freed struct module* */
Switch to devm_rtc_allocate_device/rtc_register_device to register the rtc
as late as possible.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b3a5ac42ab18b7d1a8f2f072ca0ee76a3b754a43 ]
On 32bit platforms, time_t is still a signed 32bit long. If it is
overflowed, userspace and the kernel cant agree on the current system time.
This causes multiple issues, in particular with systemd:
https://github.com/systemd/systemd/issues/1143
A good workaround is to simply avoid using hctosys which is something I
greatly encourage as the time is better set by userspace.
However, many distribution enable it and use systemd which is rendering the
system unusable in case the RTC holds a date after 2038 (and more so after
2106). Many drivers have workaround for this case and they should be
eliminated so there is only one place left to fix when userspace is able to
cope with dates after the 31bit overflow.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1485991c024603b2fb4ae77beb7a0d741128a48e ]
commit 179a502f8c46 ("rtc: snvs: add Freescale rtc-snvs driver") introduces
the SNVS RTC driver with a function snvs_rtc_enable().
snvs_rtc_enable() can return an error on the enable path however this
driver does not currently trap that failure on the probe() path and
consequently if enabling the RTC fails we encounter a later error spinning
forever in rtc_write_sync_lp().
[ 36.093481] [<c010d630>] (__irq_svc) from [<c0c2e9ec>] (_raw_spin_unlock_irqrestore+0x34/0x44)
[ 36.102122] [<c0c2e9ec>] (_raw_spin_unlock_irqrestore) from [<c072e32c>] (regmap_read+0x4c/0x5c)
[ 36.110938] [<c072e32c>] (regmap_read) from [<c085d0f4>] (rtc_write_sync_lp+0x6c/0x98)
[ 36.118881] [<c085d0f4>] (rtc_write_sync_lp) from [<c085d160>] (snvs_rtc_alarm_irq_enable+0x40/0x4c)
[ 36.128041] [<c085d160>] (snvs_rtc_alarm_irq_enable) from [<c08567b4>] (rtc_timer_do_work+0xd8/0x1a8)
[ 36.137291] [<c08567b4>] (rtc_timer_do_work) from [<c01441b8>] (process_one_work+0x28c/0x76c)
[ 36.145840] [<c01441b8>] (process_one_work) from [<c01446cc>] (worker_thread+0x34/0x58c)
[ 36.153961] [<c01446cc>] (worker_thread) from [<c014aee4>] (kthread+0x138/0x150)
[ 36.161388] [<c014aee4>] (kthread) from [<c0107e14>] (ret_from_fork+0x14/0x20)
[ 36.168635] rcu_sched kthread starved for 2602 jiffies! g496 c495 f0x2 RCU_GP_WAIT_FQS(3) ->state=0x0 ->cpu=0
[ 36.178564] rcu_sched R running task 0 8 2 0x00000000
[ 36.185664] [<c0c288b0>] (__schedule) from [<c0c29134>] (schedule+0x3c/0xa0)
[ 36.192739] [<c0c29134>] (schedule) from [<c0c2db80>] (schedule_timeout+0x78/0x4e0)
[ 36.200422] [<c0c2db80>] (schedule_timeout) from [<c01a7ab0>] (rcu_gp_kthread+0x648/0x1864)
[ 36.208800] [<c01a7ab0>] (rcu_gp_kthread) from [<c014aee4>] (kthread+0x138/0x150)
[ 36.216309] [<c014aee4>] (kthread) from [<c0107e14>] (ret_from_fork+0x14/0x20)
This patch fixes by parsing the result of rtc_write_sync_lp() and
propagating both in the probe and elsewhere. If the RTC doesn't start we
don't proceed loading the driver and don't get into this loop mess later
on.
Fixes: 179a502f8c46 ("rtc: snvs: add Freescale rtc-snvs driver")
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0e254963b6ba4d63ac911e79537fea38dd03dc50 ]
Most register accesses in the altera driver honor port->regshift by
using altera_uart_writel(). There are a few accesses however that were
missed when the driver was converted to use port->regshift and some
others were added later in commit 4d9d7d896d77 ("serial: altera_uart:
add earlycon support").
Fixes: 2780ad42f5fe ("tty: serial: altera_uart: Use port->regshift to store bus shift")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2e9fe539108320820016f78ca7704a7342788380 ]
Currently, data in RX FIFO is read based on UART_LSR register state even
if RDI and RLSI interrupts are disabled in UART_IER register.
This is because when IRQ handler is called due to TX FIFO empty event,
RX FIFO is serviced based on UART_LSR register status instead of
UART_IIR status. This defeats the purpose of disabling UART RX
FIFO interrupts during throttling(see, omap_8250_throttle()) as IRQ
handler continues to drain UART RX FIFO resulting in overflow of buffer
at tty layer.
Fix this by making sure that driver drains UART RX FIFO only when
UART_IIR_RDI is set along with UART_LSR_BI or UART_LSR_DR bits.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f9f5786987e81d166c60833edcb7d1836aa16944 ]
The arc_uart_ports[] array is indexed using a value derived from the
"serialN" alias in DT, which may lead to an out-of-bounds access.
Fix this by adding a range check.
Note that the array size is defined by a Kconfig symbol
(CONFIG_SERIAL_ARC_NR_PORTS), so this can even be triggered using a
legitimate DTB.
Fixes: ea28fd56fcde69af ("serial/arc-uart: switch to devicetree based probing")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
