diff options
Diffstat (limited to 'include/linux/can/netlink.h')
| -rw-r--r-- | include/linux/can/netlink.h | 122 |
1 files changed, 0 insertions, 122 deletions
diff --git a/include/linux/can/netlink.h b/include/linux/can/netlink.h deleted file mode 100644 index 14966ddb7df1..000000000000 --- a/include/linux/can/netlink.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - * linux/can/netlink.h - * - * Definitions for the CAN netlink interface - * - * Copyright (c) 2009 Wolfgang Grandegger <wg@grandegger.com> - * - */ - -#ifndef CAN_NETLINK_H -#define CAN_NETLINK_H - -#include <linux/types.h> - -/* - * CAN bit-timing parameters - * - * For further information, please read chapter "8 BIT TIMING - * REQUIREMENTS" of the "Bosch CAN Specification version 2.0" - * at http://www.semiconductors.bosch.de/pdf/can2spec.pdf. - */ -struct can_bittiming { - __u32 bitrate; /* Bit-rate in bits/second */ - __u32 sample_point; /* Sample point in one-tenth of a percent */ - __u32 tq; /* Time quanta (TQ) in nanoseconds */ - __u32 prop_seg; /* Propagation segment in TQs */ - __u32 phase_seg1; /* Phase buffer segment 1 in TQs */ - __u32 phase_seg2; /* Phase buffer segment 2 in TQs */ - __u32 sjw; /* Synchronisation jump width in TQs */ - __u32 brp; /* Bit-rate prescaler */ -}; - -/* - * CAN harware-dependent bit-timing constant - * - * Used for calculating and checking bit-timing parameters - */ -struct can_bittiming_const { - char name[16]; /* Name of the CAN controller hardware */ - __u32 tseg1_min; /* Time segement 1 = prop_seg + phase_seg1 */ - __u32 tseg1_max; - __u32 tseg2_min; /* Time segement 2 = phase_seg2 */ - __u32 tseg2_max; - __u32 sjw_max; /* Synchronisation jump width */ - __u32 brp_min; /* Bit-rate prescaler */ - __u32 brp_max; - __u32 brp_inc; -}; - -/* - * CAN clock parameters - */ -struct can_clock { - __u32 freq; /* CAN system clock frequency in Hz */ -}; - -/* - * CAN operational and error states - */ -enum can_state { - CAN_STATE_ERROR_ACTIVE = 0, /* RX/TX error count < 96 */ - CAN_STATE_ERROR_WARNING, /* RX/TX error count < 128 */ - CAN_STATE_ERROR_PASSIVE, /* RX/TX error count < 256 */ - CAN_STATE_BUS_OFF, /* RX/TX error count >= 256 */ - CAN_STATE_STOPPED, /* Device is stopped */ - CAN_STATE_SLEEPING, /* Device is sleeping */ - CAN_STATE_MAX -}; - -/* - * CAN bus error counters - */ -struct can_berr_counter { - __u16 txerr; - __u16 rxerr; -}; - -/* - * CAN controller mode - */ -struct can_ctrlmode { - __u32 mask; - __u32 flags; -}; - -#define CAN_CTRLMODE_LOOPBACK 0x01 /* Loopback mode */ -#define CAN_CTRLMODE_LISTENONLY 0x02 /* Listen-only mode */ -#define CAN_CTRLMODE_3_SAMPLES 0x04 /* Triple sampling mode */ -#define CAN_CTRLMODE_ONE_SHOT 0x08 /* One-Shot mode */ -#define CAN_CTRLMODE_BERR_REPORTING 0x10 /* Bus-error reporting */ - -/* - * CAN device statistics - */ -struct can_device_stats { - __u32 bus_error; /* Bus errors */ - __u32 error_warning; /* Changes to error warning state */ - __u32 error_passive; /* Changes to error passive state */ - __u32 bus_off; /* Changes to bus off state */ - __u32 arbitration_lost; /* Arbitration lost errors */ - __u32 restarts; /* CAN controller re-starts */ -}; - -/* - * CAN netlink interface - */ -enum { - IFLA_CAN_UNSPEC, - IFLA_CAN_BITTIMING, - IFLA_CAN_BITTIMING_CONST, - IFLA_CAN_CLOCK, - IFLA_CAN_STATE, - IFLA_CAN_CTRLMODE, - IFLA_CAN_RESTART_MS, - IFLA_CAN_RESTART, - IFLA_CAN_BERR_COUNTER, - __IFLA_CAN_MAX -}; - -#define IFLA_CAN_MAX (__IFLA_CAN_MAX - 1) - -#endif /* CAN_NETLINK_H */ |