summaryrefslogtreecommitdiff
path: root/include/drm/drm_modeset_helper_vtables.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/drm/drm_modeset_helper_vtables.h')
-rw-r--r--include/drm/drm_modeset_helper_vtables.h147
1 files changed, 77 insertions, 70 deletions
diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h
index 69c3974bf133..091c42205667 100644
--- a/include/drm/drm_modeset_helper_vtables.h
+++ b/include/drm/drm_modeset_helper_vtables.h
@@ -30,6 +30,7 @@
#define __DRM_MODESET_HELPER_VTABLES_H__
#include <drm/drm_crtc.h>
+#include <drm/drm_encoder.h>
/**
* DOC: overview
@@ -110,9 +111,9 @@ struct drm_crtc_helper_funcs {
* This callback is used to validate a mode. The parameter mode is the
* display mode that userspace requested, adjusted_mode is the mode the
* encoders need to be fed with. Note that this is the inverse semantics
- * of the meaning for the &drm_encoder and &drm_bridge
- * ->mode_fixup() functions. If the CRTC cannot support the requested
- * conversion from mode to adjusted_mode it should reject the modeset.
+ * of the meaning for the &drm_encoder and &drm_bridge_funcs.mode_fixup
+ * vfunc. If the CRTC cannot support the requested conversion from mode
+ * to adjusted_mode it should reject the modeset.
*
* This function is used by both legacy CRTC helpers and atomic helpers.
* With atomic helpers it is optional.
@@ -133,17 +134,18 @@ struct drm_crtc_helper_funcs {
*
* Also beware that neither core nor helpers filter modes before
* passing them to the driver: While the list of modes that is
- * advertised to userspace is filtered using the connector's
- * ->mode_valid() callback, neither the core nor the helpers do any
- * filtering on modes passed in from userspace when setting a mode. It
- * is therefore possible for userspace to pass in a mode that was
- * previously filtered out using ->mode_valid() or add a custom mode
- * that wasn't probed from EDID or similar to begin with. Even though
- * this is an advanced feature and rarely used nowadays, some users rely
- * on being able to specify modes manually so drivers must be prepared
- * to deal with it. Specifically this means that all drivers need not
- * only validate modes in ->mode_valid() but also in ->mode_fixup() to
- * make sure invalid modes passed in from userspace are rejected.
+ * advertised to userspace is filtered using the
+ * &drm_connector.mode_valid callback, neither the core nor the helpers
+ * do any filtering on modes passed in from userspace when setting a
+ * mode. It is therefore possible for userspace to pass in a mode that
+ * was previously filtered out using &drm_connector.mode_valid or add a
+ * custom mode that wasn't probed from EDID or similar to begin with.
+ * Even though this is an advanced feature and rarely used nowadays,
+ * some users rely on being able to specify modes manually so drivers
+ * must be prepared to deal with it. Specifically this means that all
+ * drivers need not only validate modes in &drm_connector.mode_valid but
+ * also in this or in the &drm_encoder_helper_funcs.mode_fixup callback
+ * to make sure invalid modes passed in from userspace are rejected.
*
* RETURNS:
*
@@ -204,7 +206,7 @@ struct drm_crtc_helper_funcs {
* optimized fast-path instead of a full mode set operation with all the
* resulting flickering. If it is not present
* drm_crtc_helper_set_config() will fall back to a full modeset, using
- * the ->mode_set() callback. Since it can't update other planes it's
+ * the @mode_set callback. Since it can't update other planes it's
* incompatible with atomic modeset support.
*
* This callback is only used by the CRTC helpers and deprecated.
@@ -237,8 +239,7 @@ struct drm_crtc_helper_funcs {
/**
* @load_lut:
*
- * Load a LUT prepared with the @gamma_set functions from
- * &drm_fb_helper_funcs.
+ * Load a LUT prepared with the &drm_fb_helper_funcs.gamma_set vfunc.
*
* This callback is optional and is only used by the fbdev emulation
* helpers.
@@ -256,10 +257,11 @@ struct drm_crtc_helper_funcs {
*
* This callback should be used to disable the CRTC. With the atomic
* drivers it is called after all encoders connected to this CRTC have
- * been shut off already using their own ->disable hook. If that
- * sequence is too simple drivers can just add their own hooks and call
- * it from this CRTC callback here by looping over all encoders
- * connected to it using for_each_encoder_on_crtc().
+ * been shut off already using their own
+ * &drm_encoder_helper_funcs.disable hook. If that sequence is too
+ * simple drivers can just add their own hooks and call it from this
+ * CRTC callback here by looping over all encoders connected to it using
+ * for_each_encoder_on_crtc().
*
* This hook is used both by legacy CRTC helpers and atomic helpers.
* Atomic drivers don't need to implement it if there's no need to
@@ -288,10 +290,10 @@ struct drm_crtc_helper_funcs {
*
* This callback should be used to enable the CRTC. With the atomic
* drivers it is called before all encoders connected to this CRTC are
- * enabled through the encoder's own ->enable hook. If that sequence is
- * too simple drivers can just add their own hooks and call it from this
- * CRTC callback here by looping over all encoders connected to it using
- * for_each_encoder_on_crtc().
+ * enabled through the encoder's own &drm_encoder_helper_funcs.enable
+ * hook. If that sequence is too simple drivers can just add their own
+ * hooks and call it from this CRTC callback here by looping over all
+ * encoders connected to it using for_each_encoder_on_crtc().
*
* This hook is used only by atomic helpers, for symmetry with @disable.
* Atomic drivers don't need to implement it if there's no need to
@@ -315,16 +317,16 @@ struct drm_crtc_helper_funcs {
* beforehand. This is calling order used by the default helper
* implementation in drm_atomic_helper_check().
*
- * When using drm_atomic_helper_check_planes() CRTCs' ->atomic_check()
- * hooks are called after the ones for planes, which allows drivers to
- * assign shared resources requested by planes in the CRTC callback
- * here. For more complicated dependencies the driver can call the provided
- * check helpers multiple times until the computed state has a final
- * configuration and everything has been checked.
+ * When using drm_atomic_helper_check_planes() this hook is called
+ * after the &drm_plane_helper_funcs.atomc_check hook for planes, which
+ * allows drivers to assign shared resources requested by planes in this
+ * callback here. For more complicated dependencies the driver can call
+ * the provided check helpers multiple times until the computed state
+ * has a final configuration and everything has been checked.
*
* This function is also allowed to inspect any other object's state and
* can add more state objects to the atomic commit if needed. Care must
- * be taken though to ensure that state check&compute functions for
+ * be taken though to ensure that state check and compute functions for
* these added states are all called, and derived state in other objects
* all updated. Again the recommendation is to just call check helpers
* until a maximal configuration is reached.
@@ -399,10 +401,11 @@ struct drm_crtc_helper_funcs {
*
* This callback should be used to disable the CRTC. With the atomic
* drivers it is called after all encoders connected to this CRTC have
- * been shut off already using their own ->disable hook. If that
- * sequence is too simple drivers can just add their own hooks and call
- * it from this CRTC callback here by looping over all encoders
- * connected to it using for_each_encoder_on_crtc().
+ * been shut off already using their own
+ * &drm_encoder_helper_funcs.disable hook. If that sequence is too
+ * simple drivers can just add their own hooks and call it from this
+ * CRTC callback here by looping over all encoders connected to it using
+ * for_each_encoder_on_crtc().
*
* This hook is used only by atomic helpers. Atomic drivers don't
* need to implement it if there's no need to disable anything at the
@@ -482,16 +485,18 @@ struct drm_encoder_helper_funcs {
* Also beware that neither core nor helpers filter modes before
* passing them to the driver: While the list of modes that is
* advertised to userspace is filtered using the connector's
- * ->mode_valid() callback, neither the core nor the helpers do any
- * filtering on modes passed in from userspace when setting a mode. It
- * is therefore possible for userspace to pass in a mode that was
- * previously filtered out using ->mode_valid() or add a custom mode
- * that wasn't probed from EDID or similar to begin with. Even though
- * this is an advanced feature and rarely used nowadays, some users rely
- * on being able to specify modes manually so drivers must be prepared
- * to deal with it. Specifically this means that all drivers need not
- * only validate modes in ->mode_valid() but also in ->mode_fixup() to
- * make sure invalid modes passed in from userspace are rejected.
+ * &drm_connector_helper_funcs.mode_valid callback, neither the core nor
+ * the helpers do any filtering on modes passed in from userspace when
+ * setting a mode. It is therefore possible for userspace to pass in a
+ * mode that was previously filtered out using
+ * &drm_connector_helper_funcs.mode_valid or add a custom mode that
+ * wasn't probed from EDID or similar to begin with. Even though this
+ * is an advanced feature and rarely used nowadays, some users rely on
+ * being able to specify modes manually so drivers must be prepared to
+ * deal with it. Specifically this means that all drivers need not only
+ * validate modes in &drm_connector.mode_valid but also in this or in
+ * the &drm_crtc_helper_funcs.mode_fixup callback to make sure
+ * invalid modes passed in from userspace are rejected.
*
* RETURNS:
*
@@ -543,7 +548,7 @@ struct drm_encoder_helper_funcs {
* use this hook, because the helper library calls it only once and not
* every time the display pipeline is suspend using either DPMS or the
* new "ACTIVE" property. Such drivers should instead move all their
- * encoder setup into the ->enable() callback.
+ * encoder setup into the @enable callback.
*
* This callback is used both by the legacy CRTC helpers and the atomic
* modeset helpers. It is optional in the atomic helpers.
@@ -569,7 +574,7 @@ struct drm_encoder_helper_funcs {
* use this hook, because the helper library calls it only once and not
* every time the display pipeline is suspended using either DPMS or the
* new "ACTIVE" property. Such drivers should instead move all their
- * encoder setup into the ->enable() callback.
+ * encoder setup into the @enable callback.
*
* This callback is used by the atomic modeset helpers in place of the
* @mode_set callback, if set by the driver. It is optional and should
@@ -620,10 +625,10 @@ struct drm_encoder_helper_funcs {
*
* This callback should be used to disable the encoder. With the atomic
* drivers it is called before this encoder's CRTC has been shut off
- * using the CRTC's own ->disable hook. If that sequence is too simple
- * drivers can just add their own driver private encoder hooks and call
- * them from CRTC's callback by looping over all encoders connected to
- * it using for_each_encoder_on_crtc().
+ * using their own &drm_crtc_helper_funcs.disable hook. If that
+ * sequence is too simple drivers can just add their own driver private
+ * encoder hooks and call them from CRTC's callback by looping over all
+ * encoders connected to it using for_each_encoder_on_crtc().
*
* This hook is used both by legacy CRTC helpers and atomic helpers.
* Atomic drivers don't need to implement it if there's no need to
@@ -650,10 +655,10 @@ struct drm_encoder_helper_funcs {
*
* This callback should be used to enable the encoder. With the atomic
* drivers it is called after this encoder's CRTC has been enabled using
- * the CRTC's own ->enable hook. If that sequence is too simple drivers
- * can just add their own driver private encoder hooks and call them
- * from CRTC's callback by looping over all encoders connected to it
- * using for_each_encoder_on_crtc().
+ * their own &drm_crtc_helper_funcs.enable hook. If that sequence is
+ * too simple drivers can just add their own driver private encoder
+ * hooks and call them from CRTC's callback by looping over all encoders
+ * connected to it using for_each_encoder_on_crtc().
*
* This hook is used only by atomic helpers, for symmetry with @disable.
* Atomic drivers don't need to implement it if there's no need to
@@ -715,7 +720,7 @@ struct drm_connector_helper_funcs {
* @get_modes:
*
* This function should fill in all modes currently valid for the sink
- * into the connector->probed_modes list. It should also update the
+ * into the &drm_connector.probed_modes list. It should also update the
* EDID property by calling drm_mode_connector_update_edid_property().
*
* The usual way to implement this is to cache the EDID retrieved in the
@@ -724,8 +729,9 @@ struct drm_connector_helper_funcs {
* them by calling drm_add_edid_modes(). But connectors that driver a
* fixed panel can also manually add specific modes using
* drm_mode_probed_add(). Drivers which manually add modes should also
- * make sure that the @display_info, @width_mm and @height_mm fields of the
- * struct &drm_connector are filled in.
+ * make sure that the &drm_connector.display_info,
+ * &drm_connector.width_mm and &drm_connector.height_mm fields are
+ * filled in.
*
* Virtual drivers that just want some standard VESA mode with a given
* resolution can call drm_add_modes_noedid(), and mark the preferred
@@ -734,7 +740,7 @@ struct drm_connector_helper_funcs {
* Finally drivers that support audio probably want to update the ELD
* data, too, using drm_edid_to_eld().
*
- * This function is only called after the ->detect() hook has indicated
+ * This function is only called after the @detect hook has indicated
* that a sink is connected and when the EDID isn't overridden through
* sysfs or the kernel commandline.
*
@@ -767,8 +773,8 @@ struct drm_connector_helper_funcs {
*
* RETURNS:
*
- * Either MODE_OK or one of the failure reasons in enum
- * &drm_mode_status.
+ * Either &drm_mode_status.MODE_OK or one of the failure reasons in &enum
+ * drm_mode_status.
*/
enum drm_mode_status (*mode_valid)(struct drm_connector *connector,
struct drm_display_mode *mode);
@@ -874,7 +880,7 @@ struct drm_plane_helper_funcs {
* RETURNS:
*
* 0 on success or one of the following negative error codes allowed by
- * the atomic_commit hook in &drm_mode_config_funcs. When using helpers
+ * the &drm_mode_config_funcs.atomic_commit vfunc. When using helpers
* this callback is the only one which can fail an atomic commit,
* everything else must complete successfully.
*/
@@ -897,7 +903,7 @@ struct drm_plane_helper_funcs {
*
* Drivers should check plane specific constraints in this hook.
*
- * When using drm_atomic_helper_check_planes() plane's ->atomic_check()
+ * When using drm_atomic_helper_check_planes() plane's @atomic_check
* hooks are called before the ones for CRTCs, which allows drivers to
* request shared resources that the CRTC controls here. For more
* complicated dependencies the driver can call the provided check helpers
@@ -906,7 +912,7 @@ struct drm_plane_helper_funcs {
*
* This function is also allowed to inspect any other object's state and
* can add more state objects to the atomic commit if needed. Care must
- * be taken though to ensure that state check&compute functions for
+ * be taken though to ensure that state check and compute functions for
* these added states are all called, and derived state in other objects
* all updated. Again the recommendation is to just call check helpers
* until a maximal configuration is reached.
@@ -935,8 +941,8 @@ struct drm_plane_helper_funcs {
* @atomic_update:
*
* Drivers should use this function to update the plane state. This
- * hook is called in-between the ->atomic_begin() and
- * ->atomic_flush() of &drm_crtc_helper_funcs.
+ * hook is called in-between the &drm_crtc_helper_funcs.atomic_begin and
+ * drm_crtc_helper_funcs.atomic_flush callbacks.
*
* Note that the power state of the display pipe when this function is
* called depends upon the exact helpers and calling sequence the driver
@@ -952,14 +958,15 @@ struct drm_plane_helper_funcs {
* @atomic_disable:
*
* Drivers should use this function to unconditionally disable a plane.
- * This hook is called in-between the ->atomic_begin() and
- * ->atomic_flush() of &drm_crtc_helper_funcs. It is an alternative to
+ * This hook is called in-between the
+ * &drm_crtc_helper_funcs.atomic_begin and
+ * drm_crtc_helper_funcs.atomic_flush callbacks. It is an alternative to
* @atomic_update, which will be called for disabling planes, too, if
* the @atomic_disable hook isn't implemented.
*
* This hook is also useful to disable planes in preparation of a modeset,
* by calling drm_atomic_helper_disable_planes_on_crtc() from the
- * ->disable() hook in &drm_crtc_helper_funcs.
+ * &drm_crtc_helper_funcs.disable hook.
*
* Note that the power state of the display pipe when this function is
* called depends upon the exact helpers and calling sequence the driver