summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/core/config.c10
-rw-r--r--drivers/usb/core/hub.c59
-rw-r--r--drivers/usb/dwc2/gadget.c2
-rw-r--r--drivers/usb/dwc2/params.c30
-rw-r--r--drivers/usb/dwc3/core.h10
-rw-r--r--drivers/usb/dwc3/dwc3-omap.c6
-rw-r--r--drivers/usb/dwc3/dwc3-pci.c17
-rw-r--r--drivers/usb/dwc3/ep0.c46
-rw-r--r--drivers/usb/dwc3/gadget.c24
-rw-r--r--drivers/usb/gadget/composite.c12
-rw-r--r--drivers/usb/gadget/function/f_fs.c14
-rw-r--r--drivers/usb/gadget/function/f_hid.c2
-rw-r--r--drivers/usb/gadget/legacy/inode.c18
-rw-r--r--drivers/usb/gadget/udc/core.c6
-rw-r--r--drivers/usb/gadget/udc/dummy_hcd.c6
-rw-r--r--drivers/usb/host/ohci-at91.c24
-rw-r--r--drivers/usb/host/xhci-mem.c46
-rw-r--r--drivers/usb/host/xhci-mtk.c4
-rw-r--r--drivers/usb/host/xhci-pci.c3
-rw-r--r--drivers/usb/host/xhci-ring.c251
-rw-r--r--drivers/usb/host/xhci.c4
-rw-r--r--drivers/usb/host/xhci.h5
-rw-r--r--drivers/usb/musb/blackfin.c1
-rw-r--r--drivers/usb/musb/musb_core.c2
-rw-r--r--drivers/usb/musb/musb_core.h7
-rw-r--r--drivers/usb/musb/musb_dsps.c12
-rw-r--r--drivers/usb/musb/musb_host.c10
-rw-r--r--drivers/usb/musb/musbhsdma.h2
-rw-r--r--drivers/usb/serial/cyberjack.c10
-rw-r--r--drivers/usb/serial/f81534.c8
-rw-r--r--drivers/usb/serial/garmin_gps.c1
-rw-r--r--drivers/usb/serial/io_edgeport.c5
-rw-r--r--drivers/usb/serial/io_ti.c22
-rw-r--r--drivers/usb/serial/iuu_phoenix.c11
-rw-r--r--drivers/usb/serial/keyspan_pda.c14
-rw-r--r--drivers/usb/serial/kobil_sct.c12
-rw-r--r--drivers/usb/serial/mos7720.c56
-rw-r--r--drivers/usb/serial/mos7840.c24
-rw-r--r--drivers/usb/serial/omninet.c13
-rw-r--r--drivers/usb/serial/oti6858.c16
-rw-r--r--drivers/usb/serial/pl2303.c8
-rw-r--r--drivers/usb/serial/quatech2.c4
-rw-r--r--drivers/usb/serial/spcp8x5.c14
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c7
-rw-r--r--drivers/usb/storage/unusual_devs.h7
45 files changed, 549 insertions, 316 deletions
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 0aa9e7d697a5..25dbd8c7aec7 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -239,6 +239,16 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
if (ifp->desc.bNumEndpoints >= num_ep)
goto skip_to_next_endpoint_or_interface_descriptor;
+ /* Check for duplicate endpoint addresses */
+ for (i = 0; i < ifp->desc.bNumEndpoints; ++i) {
+ if (ifp->endpoint[i].desc.bEndpointAddress ==
+ d->bEndpointAddress) {
+ dev_warn(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n",
+ cfgno, inum, asnum, d->bEndpointAddress);
+ goto skip_to_next_endpoint_or_interface_descriptor;
+ }
+ }
+
endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints];
++ifp->desc.bNumEndpoints;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 1fa5c0f29c64..a56c75e09786 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -103,8 +103,7 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
static void hub_release(struct kref *kref);
static int usb_reset_and_verify_device(struct usb_device *udev);
-static void hub_usb3_port_prepare_disable(struct usb_hub *hub,
- struct usb_port *port_dev);
+static int hub_port_disable(struct usb_hub *hub, int port1, int set_state);
static inline char *portspeed(struct usb_hub *hub, int portstatus)
{
@@ -903,34 +902,6 @@ static int hub_set_port_link_state(struct usb_hub *hub, int port1,
}
/*
- * USB-3 does not have a similar link state as USB-2 that will avoid negotiating
- * a connection with a plugged-in cable but will signal the host when the cable
- * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices
- */
-static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
-{
- struct usb_port *port_dev = hub->ports[port1 - 1];
- struct usb_device *hdev = hub->hdev;
- int ret = 0;
-
- if (!hub->error) {
- if (hub_is_superspeed(hub->hdev)) {
- hub_usb3_port_prepare_disable(hub, port_dev);
- ret = hub_set_port_link_state(hub, port_dev->portnum,
- USB_SS_PORT_LS_U3);
- } else {
- ret = usb_clear_port_feature(hdev, port1,
- USB_PORT_FEAT_ENABLE);
- }
- }
- if (port_dev->child && set_state)
- usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED);
- if (ret && ret != -ENODEV)
- dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret);
- return ret;
-}
-
-/*
* Disable a port and mark a logical connect-change event, so that some
* time later hub_wq will disconnect() any existing usb_device on the port
* and will re-enumerate if there actually is a device attached.
@@ -4162,6 +4133,34 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port,
#endif /* CONFIG_PM */
+/*
+ * USB-3 does not have a similar link state as USB-2 that will avoid negotiating
+ * a connection with a plugged-in cable but will signal the host when the cable
+ * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices
+ */
+static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
+{
+ struct usb_port *port_dev = hub->ports[port1 - 1];
+ struct usb_device *hdev = hub->hdev;
+ int ret = 0;
+
+ if (!hub->error) {
+ if (hub_is_superspeed(hub->hdev)) {
+ hub_usb3_port_prepare_disable(hub, port_dev);
+ ret = hub_set_port_link_state(hub, port_dev->portnum,
+ USB_SS_PORT_LS_U3);
+ } else {
+ ret = usb_clear_port_feature(hdev, port1,
+ USB_PORT_FEAT_ENABLE);
+ }
+ }
+ if (port_dev->child && set_state)
+ usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED);
+ if (ret && ret != -ENODEV)
+ dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret);
+ return ret;
+}
+
/* USB 2.0 spec, 7.1.7.3 / fig 7-29:
*
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index b95930f20d90..c55db4aa54d6 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3753,7 +3753,7 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
hs_ep->desc_list = dma_alloc_coherent(hsotg->dev,
MAX_DMA_DESC_NUM_GENERIC *
sizeof(struct dwc2_dma_desc),
- &hs_ep->desc_list_dma, GFP_KERNEL);
+ &hs_ep->desc_list_dma, GFP_ATOMIC);
if (!hs_ep->desc_list) {
ret = -ENOMEM;
goto error2;
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index a786256535b6..11fe68a4627b 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -247,8 +247,6 @@ MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
static void dwc2_get_device_property(struct dwc2_hsotg *hsotg,
char *property, u8 size, u64 *value)
{
- u8 val8;
- u16 val16;
u32 val32;
switch (size) {
@@ -256,17 +254,7 @@ static void dwc2_get_device_property(struct dwc2_hsotg *hsotg,
*value = device_property_read_bool(hsotg->dev, property);
break;
case 1:
- if (device_property_read_u8(hsotg->dev, property, &val8))
- return;
-
- *value = val8;
- break;
case 2:
- if (device_property_read_u16(hsotg->dev, property, &val16))
- return;
-
- *value = val16;
- break;
case 4:
if (device_property_read_u32(hsotg->dev, property, &val32))
return;
@@ -1100,13 +1088,13 @@ static void dwc2_set_gadget_dma(struct dwc2_hsotg *hsotg)
/* Buffer DMA */
dwc2_set_param_bool(hsotg, &p->g_dma,
false, "gadget-dma",
- true, false,
+ dma_capable, false,
dma_capable);
/* DMA Descriptor */
dwc2_set_param_bool(hsotg, &p->g_dma_desc, false,
"gadget-dma-desc",
- p->g_dma, false,
+ !!hw->dma_desc_enable, false,
!!hw->dma_desc_enable);
}
@@ -1130,8 +1118,14 @@ static void dwc2_set_parameters(struct dwc2_hsotg *hsotg,
dwc2_set_param_bool(hsotg, &p->host_dma,
false, "host-dma",
- true, false,
+ dma_capable, false,
dma_capable);
+ dwc2_set_param_host_rx_fifo_size(hsotg,
+ params->host_rx_fifo_size);
+ dwc2_set_param_host_nperio_tx_fifo_size(hsotg,
+ params->host_nperio_tx_fifo_size);
+ dwc2_set_param_host_perio_tx_fifo_size(hsotg,
+ params->host_perio_tx_fifo_size);
}
dwc2_set_param_dma_desc_enable(hsotg, params->dma_desc_enable);
dwc2_set_param_dma_desc_fs_enable(hsotg, params->dma_desc_fs_enable);
@@ -1140,12 +1134,6 @@ static void dwc2_set_parameters(struct dwc2_hsotg *hsotg,
params->host_support_fs_ls_low_power);
dwc2_set_param_enable_dynamic_fifo(hsotg,
params->enable_dynamic_fifo);
- dwc2_set_param_host_rx_fifo_size(hsotg,
- params->host_rx_fifo_size);
- dwc2_set_param_host_nperio_tx_fifo_size(hsotg,
- params->host_nperio_tx_fifo_size);
- dwc2_set_param_host_perio_tx_fifo_size(hsotg,
- params->host_perio_tx_fifo_size);
dwc2_set_param_max_transfer_size(hsotg,
params->max_transfer_size);
dwc2_set_param_max_packet_count(hsotg,
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index de5a8570be04..14b760209680 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -45,9 +45,7 @@
#define DWC3_XHCI_RESOURCES_NUM 2
#define DWC3_SCRATCHBUF_SIZE 4096 /* each buffer is assumed to be 4KiB */
-#define DWC3_EVENT_SIZE 4 /* bytes */
-#define DWC3_EVENT_MAX_NUM 64 /* 2 events/endpoint */
-#define DWC3_EVENT_BUFFERS_SIZE (DWC3_EVENT_SIZE * DWC3_EVENT_MAX_NUM)
+#define DWC3_EVENT_BUFFERS_SIZE 4096
#define DWC3_EVENT_TYPE_MASK 0xfe
#define DWC3_EVENT_TYPE_DEV 0
@@ -311,9 +309,8 @@
#define DWC3_DCFG_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */
#define DWC3_DCFG_SUPERSPEED (4 << 0)
#define DWC3_DCFG_HIGHSPEED (0 << 0)
-#define DWC3_DCFG_FULLSPEED2 (1 << 0)
+#define DWC3_DCFG_FULLSPEED (1 << 0)
#define DWC3_DCFG_LOWSPEED (2 << 0)
-#define DWC3_DCFG_FULLSPEED1 (3 << 0)
#define DWC3_DCFG_NUMP_SHIFT 17
#define DWC3_DCFG_NUMP(n) (((n) >> DWC3_DCFG_NUMP_SHIFT) & 0x1f)
@@ -405,9 +402,8 @@
#define DWC3_DSTS_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */
#define DWC3_DSTS_SUPERSPEED (4 << 0)
#define DWC3_DSTS_HIGHSPEED (0 << 0)
-#define DWC3_DSTS_FULLSPEED2 (1 << 0)
+#define DWC3_DSTS_FULLSPEED (1 << 0)
#define DWC3_DSTS_LOWSPEED (2 << 0)
-#define DWC3_DSTS_FULLSPEED1 (3 << 0)
/* Device Generic Command Register */
#define DWC3_DGCMD_SET_LMP 0x01
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 29e80cc9b634..eb1b9cb3f9d1 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -19,6 +19,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/platform_data/dwc3-omap.h>
@@ -510,7 +511,7 @@ static int dwc3_omap_probe(struct platform_device *pdev)
/* check the DMA Status */
reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG);
-
+ irq_set_status_flags(omap->irq, IRQ_NOAUTOEN);
ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt,
dwc3_omap_interrupt_thread, IRQF_SHARED,
"dwc3-omap", omap);
@@ -531,7 +532,7 @@ static int dwc3_omap_probe(struct platform_device *pdev)
}
dwc3_omap_enable_irqs(omap);
-
+ enable_irq(omap->irq);
return 0;
err2:
@@ -552,6 +553,7 @@ static int dwc3_omap_remove(struct platform_device *pdev)
extcon_unregister_notifier(omap->edev, EXTCON_USB, &omap->vbus_nb);
extcon_unregister_notifier(omap->edev, EXTCON_USB_HOST, &omap->id_nb);
dwc3_omap_disable_irqs(omap);
+ disable_irq(omap->irq);
of_platform_depopulate(omap->dev);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 2b73339f286b..cce0a220b6b0 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -38,6 +38,7 @@
#define PCI_DEVICE_ID_INTEL_BXT_M 0x1aaa
#define PCI_DEVICE_ID_INTEL_APL 0x5aaa
#define PCI_DEVICE_ID_INTEL_KBP 0xa2b0
+#define PCI_DEVICE_ID_INTEL_GLK 0x31aa
#define PCI_INTEL_BXT_DSM_UUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511"
#define PCI_INTEL_BXT_FUNC_PMU_PWR 4
@@ -73,16 +74,6 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
{
struct platform_device *dwc3 = dwc->dwc3;
struct pci_dev *pdev = dwc->pci;
- int ret;
-
- struct property_entry sysdev_property[] = {
- PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
- { },
- };
-
- ret = platform_device_add_properties(dwc3, sysdev_property);
- if (ret)
- return ret;
if (pdev->vendor == PCI_VENDOR_ID_AMD &&
pdev->device == PCI_DEVICE_ID_AMD_NL_USB) {
@@ -105,6 +96,7 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
PROPERTY_ENTRY_BOOL("snps,disable_scramble_quirk"),
PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"),
PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
+ PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
{ },
};
@@ -115,7 +107,8 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
int ret;
struct property_entry properties[] = {
- PROPERTY_ENTRY_STRING("dr-mode", "peripheral"),
+ PROPERTY_ENTRY_STRING("dr_mode", "peripheral"),
+ PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
{ }
};
@@ -167,6 +160,7 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
PROPERTY_ENTRY_BOOL("snps,usb3_lpm_capable"),
PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
PROPERTY_ENTRY_BOOL("snps,dis_enblslpm_quirk"),
+ PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
{ },
};
@@ -274,6 +268,7 @@ static const struct pci_device_id dwc3_pci_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT_M), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBP), },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GLK), },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), },
{ } /* Terminating Entry */
};
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 4878d187c7d4..9bb1f8526f3e 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -39,18 +39,13 @@ static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep);
static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
struct dwc3_ep *dep, struct dwc3_request *req);
-static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
- u32 len, u32 type, bool chain)
+static void dwc3_ep0_prepare_one_trb(struct dwc3 *dwc, u8 epnum,
+ dma_addr_t buf_dma, u32 len, u32 type, bool chain)
{
- struct dwc3_gadget_ep_cmd_params params;
struct dwc3_trb *trb;
struct dwc3_ep *dep;
- int ret;
-
dep = dwc->eps[epnum];
- if (dep->flags & DWC3_EP_BUSY)
- return 0;
trb = &dwc->ep0_trb[dep->trb_enqueue];
@@ -71,15 +66,23 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
trb->ctrl |= (DWC3_TRB_CTRL_IOC
| DWC3_TRB_CTRL_LST);
- if (chain)
+ trace_dwc3_prepare_trb(dep, trb);
+}
+
+static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum)
+{
+ struct dwc3_gadget_ep_cmd_params params;
+ struct dwc3_ep *dep;
+ int ret;
+
+ dep = dwc->eps[epnum];
+ if (dep->flags & DWC3_EP_BUSY)
return 0;
memset(&params, 0, sizeof(params));
params.param0 = upper_32_bits(dwc->ep0_trb_addr);
params.param1 = lower_32_bits(dwc->ep0_trb_addr);
- trace_dwc3_prepare_trb(dep, trb);
-
ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_STARTTRANSFER, &params);
if (ret < 0)
return ret;
@@ -280,8 +283,9 @@ void dwc3_ep0_out_start(struct dwc3 *dwc)
complete(&dwc->ep0_in_setup);
- ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8,
+ dwc3_ep0_prepare_one_trb(dwc, 0, dwc->ctrl_req_addr, 8,
DWC3_TRBCTL_CONTROL_SETUP, false);
+ ret = dwc3_ep0_start_trans(dwc, 0);
WARN_ON(ret < 0);
}
@@ -912,9 +916,9 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
dwc->ep0_next_event = DWC3_EP0_COMPLETE;
- ret = dwc3_ep0_start_trans(dwc, epnum,
- dwc->ctrl_req_addr, 0,
- DWC3_TRBCTL_CONTROL_DATA, false);
+ dwc3_ep0_prepare_one_trb(dwc, epnum, dwc->ctrl_req_addr,
+ 0, DWC3_TRBCTL_CONTROL_DATA, false);
+ ret = dwc3_ep0_start_trans(dwc, epnum);
WARN_ON(ret < 0);
}
}
@@ -993,9 +997,10 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
req->direction = !!dep->number;
if (req->request.length == 0) {
- ret = dwc3_ep0_start_trans(dwc, dep->number,
+ dwc3_ep0_prepare_one_trb(dwc, dep->number,
dwc->ctrl_req_addr, 0,
DWC3_TRBCTL_CONTROL_DATA, false);
+ ret = dwc3_ep0_start_trans(dwc, dep->number);
} else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
&& (dep->number == 0)) {
u32 transfer_size = 0;
@@ -1011,7 +1016,7 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
if (req->request.length > DWC3_EP0_BOUNCE_SIZE) {
transfer_size = ALIGN(req->request.length - maxpacket,
maxpacket);
- ret = dwc3_ep0_start_trans(dwc, dep->number,
+ dwc3_ep0_prepare_one_trb(dwc, dep->number,
req->request.dma,
transfer_size,
DWC3_TRBCTL_CONTROL_DATA,
@@ -1023,18 +1028,20 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
dwc->ep0_bounced = true;
- ret = dwc3_ep0_start_trans(dwc, dep->number,
+ dwc3_ep0_prepare_one_trb(dwc, dep->number,
dwc->ep0_bounce_addr, transfer_size,
DWC3_TRBCTL_CONTROL_DATA, false);
+ ret = dwc3_ep0_start_trans(dwc, dep->number);
} else {
ret = usb_gadget_map_request_by_dev(dwc->sysdev,
&req->request, dep->number);
if (ret)
return;
- ret = dwc3_ep0_start_trans(dwc, dep->number, req->request.dma,
+ dwc3_ep0_prepare_one_trb(dwc, dep->number, req->request.dma,
req->request.length, DWC3_TRBCTL_CONTROL_DATA,
false);
+ ret = dwc3_ep0_start_trans(dwc, dep->number);
}
WARN_ON(ret < 0);
@@ -1048,8 +1055,9 @@ static int dwc3_ep0_start_control_status(struct dwc3_ep *dep)
type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3
: DWC3_TRBCTL_CONTROL_STATUS2;
- return dwc3_ep0_start_trans(dwc, dep->number,
+ dwc3_ep0_prepare_one_trb(dwc, dep->number,
dwc->ctrl_req_addr, 0, type, false);
+ return dwc3_ep0_start_trans(dwc, dep->number);
}
static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index efddaf5d11d1..204c754cc647 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -180,11 +180,11 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
if (req->request.status == -EINPROGRESS)
req->request.status = status;
- if (dwc->ep0_bounced && dep->number == 0)
+ if (dwc->ep0_bounced && dep->number <= 1)
dwc->ep0_bounced = false;
- else
- usb_gadget_unmap_request_by_dev(dwc->sysdev,
- &req->request, req->direction);
+
+ usb_gadget_unmap_request_by_dev(dwc->sysdev,
+ &req->request, req->direction);
trace_dwc3_gadget_giveback(req);
@@ -1720,7 +1720,7 @@ static int __dwc3_gadget_start(struct dwc3 *dwc)
reg |= DWC3_DCFG_LOWSPEED;
break;
case USB_SPEED_FULL:
- reg |= DWC3_DCFG_FULLSPEED1;
+ reg |= DWC3_DCFG_FULLSPEED;
break;
case USB_SPEED_HIGH:
reg |= DWC3_DCFG_HIGHSPEED;
@@ -2232,9 +2232,14 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
dep = dwc->eps[epnum];
- if (!(dep->flags & DWC3_EP_ENABLED) &&
- !(dep->flags & DWC3_EP_END_TRANSFER_PENDING))
- return;
+ if (!(dep->flags & DWC3_EP_ENABLED)) {
+ if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING))
+ return;
+
+ /* Handle only EPCMDCMPLT when EP disabled */
+ if (event->endpoint_event != DWC3_DEPEVT_EPCMDCMPLT)
+ return;
+ }
if (epnum == 0 || epnum == 1) {
dwc3_ep0_interrupt(dwc, event);
@@ -2531,8 +2536,7 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
dwc->gadget.ep0->maxpacket = 64;
dwc->gadget.speed = USB_SPEED_HIGH;
break;
- case DWC3_DSTS_FULLSPEED2:
- case DWC3_DSTS_FULLSPEED1:
+ case DWC3_DSTS_FULLSPEED:
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
dwc->gadget.ep0->maxpacket = 64;
dwc->gadget.speed = USB_SPEED_FULL;
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 41ab61f9b6e0..002822d98fda 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1694,9 +1694,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
value = min(w_length, (u16) 1);
break;
- /* function drivers must handle get/set altsetting; if there's
- * no get() method, we know only altsetting zero works.
- */
+ /* function drivers must handle get/set altsetting */
case USB_REQ_SET_INTERFACE:
if (ctrl->bRequestType != USB_RECIP_INTERFACE)
goto unknown;
@@ -1705,7 +1703,13 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
f = cdev->config->interface[intf];
if (!f)
break;
- if (w_value && !f->set_alt)
+
+ /*
+ * If there's no get_alt() method, we know only altsetting zero
+ * works. There is no need to check if set_alt() is not NULL
+ * as we check this in usb_add_function().
+ */
+ if (w_value && !f->get_alt)
break;
value = f->set_alt(f, w_index, w_value);
if (value == USB_GADGET_DELAYED_STATUS) {
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index aab3fc1dbb94..5e746adc8a2d 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -2091,8 +2091,8 @@ static int __ffs_data_do_entity(enum ffs_entity_type type,
case FFS_STRING:
/*
- * Strings are indexed from 1 (0 is magic ;) reserved
- * for languages list or some such)
+ * Strings are indexed from 1 (0 is reserved
+ * for languages list)
*/
if (*valuep > helper->ffs->strings_count)
helper->ffs->strings_count = *valuep;
@@ -2252,7 +2252,7 @@ static int __ffs_data_do_os_desc(enum ffs_os_desc_type type,
if (len < sizeof(*d) ||
d->bFirstInterfaceNumber >= ffs->interfaces_count ||
- !d->Reserved1)
+ d->Reserved1)
return -EINVAL;
for (i = 0; i < ARRAY_SIZE(d->Reserved2); ++i)
if (d->Reserved2[i])
@@ -3666,6 +3666,7 @@ static void ffs_closed(struct ffs_data *ffs)
{
struct ffs_dev *ffs_obj;
struct f_fs_opts *opts;
+ struct config_item *ci;
ENTER();
ffs_dev_lock();
@@ -3689,8 +3690,11 @@ static void ffs_closed(struct ffs_data *ffs)
|| !atomic_read(&opts->func_inst.group.cg_item.ci_kref.refcount))
goto done;
- unregister_gadget_item(ffs_obj->opts->
- func_inst.group.cg_item.ci_parent->ci_parent);
+ ci = opts->func_inst.group.cg_item.ci_parent->ci_parent;
+ ffs_dev_unlock();
+
+ unregister_gadget_item(ci);
+ return;
done:
ffs_dev_unlock();
}
diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
index 3151d2a0fe59..5f8139b8e601 100644
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -593,7 +593,7 @@ static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
}
status = usb_ep_enable(hidg->out_ep);
if (status < 0) {
- ERROR(cdev, "Enable IN endpoint FAILED!\n");
+ ERROR(cdev, "Enable OUT endpoint FAILED!\n");
goto fail;
}
hidg->out_ep->driver_data = hidg;
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index e8f4102d19df..6bde4396927c 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -1126,7 +1126,7 @@ ep0_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
/* data and/or status stage for control request */
} else if (dev->state == STATE_DEV_SETUP) {
- /* IN DATA+STATUS caller makes len <= wLength */
+ len = min_t(size_t, len, dev->setup_wLength);
if (dev->setup_in) {
retval = setup_req (dev->gadget->ep0, dev->req, len);
if (retval == 0) {
@@ -1734,10 +1734,12 @@ static struct usb_gadget_driver gadgetfs_driver = {
* such as configuration notifications.
*/
-static int is_valid_config (struct usb_config_descriptor *config)
+static int is_valid_config(struct usb_config_descriptor *config,
+ unsigned int total)
{
return config->bDescriptorType == USB_DT_CONFIG
&& config->bLength == USB_DT_CONFIG_SIZE
+ && total >= USB_DT_CONFIG_SIZE
&& config->bConfigurationValue != 0
&& (config->bmAttributes & USB_CONFIG_ATT_ONE) != 0
&& (config->bmAttributes & USB_CONFIG_ATT_WAKEUP) == 0;
@@ -1762,7 +1764,8 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
}
spin_unlock_irq(&dev->lock);
- if (len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4))
+ if ((len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4)) ||
+ (len > PAGE_SIZE * 4))
return -EINVAL;
/* we might need to change message format someday */
@@ -1786,7 +1789,8 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
/* full or low speed config */
dev->config = (void *) kbuf;
total = le16_to_cpu(dev->config->wTotalLength);
- if (!is_valid_config (dev->config) || total >= length)
+ if (!is_valid_config(dev->config, total) ||
+ total > length - USB_DT_DEVICE_SIZE)
goto fail;
kbuf += total;
length -= total;
@@ -1795,10 +1799,13 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
if (kbuf [1] == USB_DT_CONFIG) {
dev->hs_config = (void *) kbuf;
total = le16_to_cpu(dev->hs_config->wTotalLength);
- if (!is_valid_config (dev->hs_config) || total >= length)
+ if (!is_valid_config(dev->hs_config, total) ||
+ total > length - USB_DT_DEVICE_SIZE)
goto fail;
kbuf += total;
length -= total;
+ } else {
+ dev->hs_config = NULL;
}
/* could support multiple configs, using another encoding! */
@@ -1811,7 +1818,6 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
|| dev->dev->bDescriptorType != USB_DT_DEVICE
|| dev->dev->bNumConfigurations != 1)
goto fail;
- dev->dev->bNumConfigurations = 1;
dev->dev->bcdUSB = cpu_to_le16 (0x0200);
/* triggers gadgetfs_bind(); then we can enumerate. */
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 9483489080f6..0402177f93cd 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -1317,7 +1317,11 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
if (!ret)
break;
}
- if (!ret && !udc->driver)
+ if (ret)
+ ret = -ENODEV;
+ else if (udc->driver)
+ ret = -EBUSY;
+ else
goto found;
} else {
list_for_each_entry(udc, &udc_list, list) {
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index 02b14e91ae6c..c60abe3a68f9 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -330,7 +330,7 @@ static void nuke(struct dummy *dum, struct dummy_ep *ep)
/* caller must hold lock */
static void stop_activity(struct dummy *dum)
{
- struct dummy_ep *ep;
+ int i;
/* prevent any more requests */
dum->address = 0;
@@ -338,8 +338,8 @@ static void stop_activity(struct dummy *dum)
/* The timer is left running so that outstanding URBs can fail */
/* nuke any pending requests first, so driver i/o is quiesced */
- list_for_each_entry(ep, &dum->gadget.ep_list, ep.ep_list)
- nuke(dum, ep);
+ for (i = 0; i < DUMMY_ENDPOINTS; ++i)
+ nuke(dum, &dum->ep[i]);
/* driver now does any non-usb quiescing necessary */
}
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index be9e63836881..414e3c376dbb 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -43,7 +43,6 @@ struct at91_usbh_data {
struct gpio_desc *overcurrent_pin[AT91_MAX_USBH_PORTS];
u8 ports; /* number of ports on root hub */
u8 overcurrent_supported;
- u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS];
u8 overcurrent_status[AT91_MAX_USBH_PORTS];
u8 overcurrent_changed[AT91_MAX_USBH_PORTS];
};
@@ -266,8 +265,7 @@ static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int
if (!valid_port(port))
return;
- gpiod_set_value(pdata->vbus_pin[port],
- pdata->vbus_pin_active_low[port] ^ enable);
+ gpiod_set_value(pdata->vbus_pin[port], enable);
}
static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
@@ -275,8 +273,7 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
if (!valid_port(port))
return -EINVAL;
- return gpiod_get_value(pdata->vbus_pin[port]) ^
- pdata->vbus_pin_active_low[port];
+ return gpiod_get_value(pdata->vbus_pin[port]);
}
/*
@@ -533,18 +530,17 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
pdata->ports = ports;
at91_for_each_port(i) {
- pdata->vbus_pin[i] = devm_gpiod_get_optional(&pdev->dev,
- "atmel,vbus-gpio",
- GPIOD_IN);
+ if (i >= pdata->ports)
+ break;
+
+ pdata->vbus_pin[i] =
+ devm_gpiod_get_index_optional(&pdev->dev, "atmel,vbus",
+ i, GPIOD_OUT_HIGH);
if (IS_ERR(pdata->vbus_pin[i])) {
err = PTR_ERR(pdata->vbus_pin[i]);
dev_err(&pdev->dev, "unable to claim gpio \"vbus\": %d\n", err);
continue;
}
-
- pdata->vbus_pin_active_low[i] = gpiod_get_value(pdata->vbus_pin[i]);
-
- ohci_at91_usb_set_power(pdata, i, 1);
}
at91_for_each_port(i) {
@@ -552,8 +548,8 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
break;
pdata->overcurrent_pin[i] =
- devm_gpiod_get_optional(&pdev->dev,
- "atmel,oc-gpio", GPIOD_IN);
+ devm_gpiod_get_index_optional(&pdev->dev, "atmel,oc",
+ i, GPIOD_IN);
if (IS_ERR(pdata->overcurrent_pin[i])) {
err = PTR_ERR(pdata->overcurrent_pin[i]);
dev_err(&pdev->dev, "unable to claim gpio \"overcurrent\": %d\n", err);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 321de2e0161b..8414ed2a02de 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -979,6 +979,40 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
xhci->devs[slot_id] = NULL;
}
+/*
+ * Free a virt_device structure.
+ * If the virt_device added a tt_info (a hub) and has children pointing to
+ * that tt_info, then free the child first. Recursive.
+ * We can't rely on udev at this point to find child-parent relationships.
+ */
+void xhci_free_virt_devices_depth_first(struct xhci_hcd *xhci, int slot_id)
+{
+ struct xhci_virt_device *vdev;
+ struct list_head *tt_list_head;
+ struct xhci_tt_bw_info *tt_info, *next;
+ int i;
+
+ vdev = xhci->devs[slot_id];
+ if (!vdev)
+ return;
+
+ tt_list_head = &(xhci->rh_bw[vdev->real_port - 1].tts);
+ list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) {
+ /* is this a hub device that added a tt_info to the tts list */
+ if (tt_info->slot_id == slot_id) {
+ /* are any devices using this tt_info? */
+ for (i = 1; i < HCS_MAX_SLOTS(xhci->hcs_params1); i++) {
+ vdev = xhci->devs[i];
+ if (vdev && (vdev->tt_info == tt_info))
+ xhci_free_virt_devices_depth_first(
+ xhci, i);
+ }
+ }
+ }
+ /* we are now at a leaf device */
+ xhci_free_virt_device(xhci, slot_id);
+}
+
int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
struct usb_device *udev, gfp_t flags)
{
@@ -1795,7 +1829,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
int size;
int i, j, num_ports;
- del_timer_sync(&xhci->cmd_timer);
+ cancel_delayed_work_sync(&xhci->cmd_timer);
/* Free the Event Ring Segment Table and the actual Event Ring */
size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
@@ -1828,8 +1862,8 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
}
}
- for (i = 1; i < MAX_HC_SLOTS; ++i)
- xhci_free_virt_device(xhci, i);
+ for (i = HCS_MAX_SLOTS(xhci->hcs_params1); i > 0; i--)
+ xhci_free_virt_devices_depth_first(xhci, i);
dma_pool_destroy(xhci->segment_pool);
xhci->segment_pool = NULL;
@@ -2342,9 +2376,9 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
INIT_LIST_HEAD(&xhci->cmd_list);
- /* init command timeout timer */
- setup_timer(&xhci->cmd_timer, xhci_handle_command_timeout,
- (unsigned long)xhci);
+ /* init command timeout work */
+ INIT_DELAYED_WORK(&xhci->cmd_timer, xhci_handle_command_timeout);
+ init_completion(&xhci->cmd_ring_stop_completion);
page_size = readl(&xhci->op_regs->page_size);
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 1094ebd2838f..bac961cd24ad 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -579,8 +579,10 @@ static int xhci_mtk_probe(struct platform_device *pdev)
goto disable_ldos;
irq = platform_get_irq(pdev, 0);
- if (irq < 0)
+ if (irq < 0) {
+ ret = irq;
goto disable_clk;
+ }
/* Initialize dma_mask and coherent_dma_mask to 32-bits */
ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index e96ae80d107e..954abfd5014d 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -165,7 +165,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI ||
- pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI)) {
+ pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI ||
+ pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI)) {
xhci->quirks |= XHCI_PME_STUCK_QUIRK;
}
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index bdf6b13d9b67..25f522b09dd9 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -279,23 +279,76 @@ void xhci_ring_cmd_db(struct xhci_hcd *xhci)
readl(&xhci->dba->doorbell[0]);
}
-static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
+static bool xhci_mod_cmd_timer(struct xhci_hcd *xhci, unsigned long delay)
+{
+ return mod_delayed_work(system_wq, &xhci->cmd_timer, delay);
+}
+
+static struct xhci_command *xhci_next_queued_cmd(struct xhci_hcd *xhci)
+{
+ return list_first_entry_or_null(&xhci->cmd_list, struct xhci_command,
+ cmd_list);
+}
+
+/*
+ * Turn all commands on command ring with status set to "aborted" to no-op trbs.
+ * If there are other commands waiting then restart the ring and kick the timer.
+ * This must be called with command ring stopped and xhci->lock held.
+ */
+static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
+ struct xhci_command *cur_cmd)
+{
+ struct xhci_command *i_cmd;
+ u32 cycle_state;
+
+ /* Turn all aborted commands in list to no-ops, then restart */
+ list_for_each_entry(i_cmd, &xhci->cmd_list, cmd_list) {
+
+ if (i_cmd->status != COMP_CMD_ABORT)
+ continue;
+
+ i_cmd->status = COMP_CMD_STOP;
+
+ xhci_dbg(xhci, "Turn aborted command %p to no-op\n",
+ i_cmd->command_trb);
+ /* get cycle state from the original cmd trb */
+ cycle_state = le32_to_cpu(
+ i_cmd->command_trb->generic.field[3]) & TRB_CYCLE;
+ /* modify the command trb to no-op command */
+ i_cmd->command_trb->generic.field[0] = 0;
+ i_cmd->command_trb->generic.field[1] = 0;
+ i_cmd->command_trb->generic.field[2] = 0;
+ i_cmd->command_trb->generic.field[3] = cpu_to_le32(
+ TRB_TYPE(TRB_CMD_NOOP) | cycle_state);
+
+ /*
+ * caller waiting for completion is called when command
+ * completion event is received for these no-op commands
+ */
+ }
+
+ xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
+
+ /* ring command ring doorbell to restart the command ring */
+ if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) &&
+ !(xhci->xhc_state & XHCI_STATE_DYING)) {
+ xhci->current_cmd = cur_cmd;
+ xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
+ xhci_ring_cmd_db(xhci);
+ }
+}
+
+/* Must be called with xhci->lock held, releases and aquires lock back */
+static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
{
u64 temp_64;
int ret;
xhci_dbg(xhci, "Abort command ring\n");
- temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
- xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
+ reinit_completion(&xhci->cmd_ring_stop_completion);
- /*
- * Writing the CMD_RING_ABORT bit should cause a cmd completion event,
- * however on some host hw the CMD_RING_RUNNING bit is correctly cleared
- * but the completion event in never sent. Use the cmd timeout timer to
- * handle those cases. Use twice the time to cover the bit polling retry
- */
- mod_timer(&xhci->cmd_timer, jiffies + (2 * XHCI_CMD_DEFAULT_TIMEOUT));
+ temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
&xhci->op_regs->cmd_ring);
@@ -315,17 +368,30 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
udelay(1000);
ret = xhci_handshake(&xhci->op_regs->cmd_ring,
CMD_RING_RUNNING, 0, 3 * 1000 * 1000);
- if (ret == 0)
- return 0;
-
- xhci_err(xhci, "Stopped the command ring failed, "
- "maybe the host is dead\n");
- del_timer(&xhci->cmd_timer);
- xhci->xhc_state |= XHCI_STATE_DYING;
- xhci_halt(xhci);
- return -ESHUTDOWN;
+ if (ret < 0) {
+ xhci_err(xhci, "Stopped the command ring failed, "
+ "maybe the host is dead\n");
+ xhci->xhc_state |= XHCI_STATE_DYING;
+ xhci_halt(xhci);
+ return -ESHUTDOWN;
+ }
+ }
+ /*
+ * Writing the CMD_RING_ABORT bit should cause a cmd completion event,
+ * however on some host hw the CMD_RING_RUNNING bit is correctly cleared
+ * but the completion event in never sent. Wait 2 secs (arbitrary
+ * number) to handle those cases after negation of CMD_RING_RUNNING.
+ */
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ ret = wait_for_completion_timeout(&xhci->cmd_ring_stop_completion,
+ msecs_to_jiffies(2000));
+ spin_lock_irqsave(&xhci->lock, flags);
+ if (!ret) {
+ xhci_dbg(xhci, "No stop event for abort, ring start fail?\n");
+ xhci_cleanup_command_queue(xhci);
+ } else {
+ xhci_handle_stopped_cmd_ring(xhci, xhci_next_queued_cmd(xhci));
}
-
return 0;
}
@@ -1207,101 +1273,62 @@ void xhci_cleanup_command_queue(struct xhci_hcd *xhci)
xhci_complete_del_and_free_cmd(cur_cmd, COMP_CMD_ABORT);
}
-/*
- * Turn all commands on command ring with status set to "aborted" to no-op trbs.
- * If there are other commands waiting then restart the ring and kick the timer.
- * This must be called with command ring stopped and xhci->lock held.
- */
-static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
- struct xhci_command *cur_cmd)
-{
- struct xhci_command *i_cmd, *tmp_cmd;
- u32 cycle_state;
-
- /* Turn all aborted commands in list to no-ops, then restart */
- list_for_each_entry_safe(i_cmd, tmp_cmd, &xhci->cmd_list,
- cmd_list) {
-
- if (i_cmd->status != COMP_CMD_ABORT)
- continue;
-
- i_cmd->status = COMP_CMD_STOP;
-
- xhci_dbg(xhci, "Turn aborted command %p to no-op\n",
- i_cmd->command_trb);
- /* get cycle state from the original cmd trb */
- cycle_state = le32_to_cpu(
- i_cmd->command_trb->generic.field[3]) & TRB_CYCLE;
- /* modify the command trb to no-op command */
- i_cmd->command_trb->generic.field[0] = 0;
- i_cmd->command_trb->generic.field[1] = 0;
- i_cmd->command_trb->generic.field[2] = 0;
- i_cmd->command_trb->generic.field[3] = cpu_to_le32(
- TRB_TYPE(TRB_CMD_NOOP) | cycle_state);
-
- /*
- * caller waiting for completion is called when command
- * completion event is received for these no-op commands
- */
- }
-
- xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
-
- /* ring command ring doorbell to restart the command ring */
- if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) &&
- !(xhci->xhc_state & XHCI_STATE_DYING)) {
- xhci->current_cmd = cur_cmd;
- mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
- xhci_ring_cmd_db(xhci);
- }
- return;
-}
-
-
-void xhci_handle_command_timeout(unsigned long data)
+void xhci_handle_command_timeout(struct work_struct *work)
{
struct xhci_hcd *xhci;
int ret;
unsigned long flags;
u64 hw_ring_state;
- bool second_timeout = false;
- xhci = (struct xhci_hcd *) data;
- /* mark this command to be cancelled */
+ xhci = container_of(to_delayed_work(work), struct xhci_hcd, cmd_timer);
+
spin_lock_irqsave(&xhci->lock, flags);
- if (xhci->current_cmd) {
- if (xhci->current_cmd->status == COMP_CMD_ABORT)
- second_timeout = true;
- xhci->current_cmd->status = COMP_CMD_ABORT;
+
+ /*
+ * If timeout work is pending, or current_cmd is NULL, it means we
+ * raced with command completion. Command is handled so just return.
+ */
+ if (!xhci->current_cmd || delayed_work_pending(&xhci->cmd_timer)) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return;
}
+ /* mark this command to be cancelled */
+ xhci->current_cmd->status = COMP_CMD_ABORT;
/* Make sure command ring is running before aborting it */
hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) &&
(hw_ring_state & CMD_RING_RUNNING)) {
- spin_unlock_irqrestore(&xhci->lock, flags);
+ /* Prevent new doorbell, and start command abort */
+ xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
xhci_dbg(xhci, "Command timeout\n");
- ret = xhci_abort_cmd_ring(xhci);
+ ret = xhci_abort_cmd_ring(xhci, flags);
if (unlikely(ret == -ESHUTDOWN)) {
xhci_err(xhci, "Abort command ring failed\n");
xhci_cleanup_command_queue(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
usb_hc_died(xhci_to_hcd(xhci)->primary_hcd);
xhci_dbg(xhci, "xHCI host controller is dead.\n");
+
+ return;
}
- return;
+
+ goto time_out_completed;
}
- /* command ring failed to restart, or host removed. Bail out */
- if (second_timeout || xhci->xhc_state & XHCI_STATE_REMOVING) {
- spin_unlock_irqrestore(&xhci->lock, flags);
- xhci_dbg(xhci, "command timed out twice, ring start fail?\n");
+ /* host removed. Bail out */
+ if (xhci->xhc_state & XHCI_STATE_REMOVING) {
+ xhci_dbg(xhci, "host removed, ring start fail?\n");
xhci_cleanup_command_queue(xhci);
- return;
+
+ goto time_out_completed;
}
/* command timeout on stopped ring, ring can't be aborted */
xhci_dbg(xhci, "Command timeout on stopped ring\n");
xhci_handle_stopped_cmd_ring(xhci, xhci->current_cmd);
+
+time_out_completed:
spin_unlock_irqrestore(&xhci->lock, flags);
return;
}
@@ -1333,7 +1360,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
cmd = list_entry(xhci->cmd_list.next, struct xhci_command, cmd_list);
- del_timer(&xhci->cmd_timer);
+ cancel_delayed_work(&xhci->cmd_timer);
trace_xhci_cmd_completion(cmd_trb, (struct xhci_generic_trb *) event);
@@ -1341,7 +1368,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
/* If CMD ring stopped we own the trbs between enqueue and dequeue */
if (cmd_comp_code == COMP_CMD_STOP) {
- xhci_handle_stopped_cmd_ring(xhci, cmd);
+ complete_all(&xhci->cmd_ring_stop_completion);
return;
}
@@ -1359,8 +1386,11 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
*/
if (cmd_comp_code == COMP_CMD_ABORT) {
xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
- if (cmd->status == COMP_CMD_ABORT)
+ if (cmd->status == COMP_CMD_ABORT) {
+ if (xhci->current_cmd == cmd)
+ xhci->current_cmd = NULL;
goto event_handled;
+ }
}
cmd_type = TRB_FIELD_TO_TYPE(le32_to_cpu(cmd_trb->generic.field[3]));
@@ -1421,7 +1451,9 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
if (cmd->cmd_list.next != &xhci->cmd_list) {
xhci->current_cmd = list_entry(cmd->cmd_list.next,
struct xhci_command, cmd_list);
- mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
+ xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
+ } else if (xhci->current_cmd == cmd) {
+ xhci->current_cmd = NULL;
}
event_handled:
@@ -1939,8 +1971,9 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
struct xhci_ep_ctx *ep_ctx;
u32 trb_comp_code;
u32 remaining, requested;
- bool on_data_stage;
+ u32 trb_type;
+ trb_type = TRB_FIELD_TO_TYPE(le32_to_cpu(ep_trb->generic.field[3]));
slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
xdev = xhci->devs[slot_id];
ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
@@ -1950,14 +1983,11 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
requested = td->urb->transfer_buffer_length;
remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
- /* not setup (dequeue), or status stage means we are at data stage */
- on_data_stage = (ep_trb != ep_ring->dequeue && ep_trb != td->last_trb);
-
switch (trb_comp_code) {
case COMP_SUCCESS:
- if (ep_trb != td->last_trb) {
+ if (trb_type != TRB_STATUS) {
xhci_warn(xhci, "WARN: Success on ctrl %s TRB without IOC set?\n",
- on_data_stage ? "data" : "setup");
+ (trb_type == TRB_DATA) ? "data" : "setup");
*status = -ESHUTDOWN;
break;
}
@@ -1967,15 +1997,25 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
*status = 0;
break;
case COMP_STOP_SHORT:
- if (on_data_stage)
+ if (trb_type == TRB_DATA || trb_type == TRB_NORMAL)
td->urb->actual_length = remaining;
else
xhci_warn(xhci, "WARN: Stopped Short Packet on ctrl setup or status TRB\n");
goto finish_td;
case COMP_STOP:
- if (on_data_stage)
+ switch (trb_type) {
+ case TRB_SETUP:
+ td->urb->actual_length = 0;
+ goto finish_td;
+ case TRB_DATA:
+ case TRB_NORMAL:
td->urb->actual_length = requested - remaining;
- goto finish_td;
+ goto finish_td;
+ default:
+ xhci_warn(xhci, "WARN: unexpected TRB Type %d\n",
+ trb_type);
+ goto finish_td;
+ }
case COMP_STOP_INVAL:
goto finish_td;
default:
@@ -1987,7 +2027,7 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
/* else fall through */
case COMP_STALL:
/* Did we transfer part of the data (middle) phase? */
- if (on_data_stage)
+ if (trb_type == TRB_DATA || trb_type == TRB_NORMAL)
td->urb->actual_length = requested - remaining;
else if (!td->urb_length_set)
td->urb->actual_length = 0;
@@ -1995,14 +2035,15 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
}
/* stopped at setup stage, no data transferred */
- if (ep_trb == ep_ring->dequeue)
+ if (trb_type == TRB_SETUP)
goto finish_td;
/*
* if on data stage then update the actual_length of the URB and flag it
* as set, so it won't be overwritten in the event for the last TRB.
*/
- if (on_data_stage) {
+ if (trb_type == TRB_DATA ||
+ trb_type == TRB_NORMAL) {
td->urb_length_set = true;
td->urb->actual_length = requested - remaining;
xhci_dbg(xhci, "Waiting for status stage event\n");
@@ -3790,9 +3831,9 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
/* if there are no other commands queued we start the timeout timer */
if (xhci->cmd_list.next == &cmd->cmd_list &&
- !timer_pending(&xhci->cmd_timer)) {
+ !delayed_work_pending(&xhci->cmd_timer)) {
xhci->current_cmd = cmd;
- mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
+ xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
}
queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3,
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 1cd56417cbec..0c8deb9ed42d 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3787,8 +3787,10 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
mutex_lock(&xhci->mutex);
- if (xhci->xhc_state) /* dying, removing or halted */
+ if (xhci->xhc_state) { /* dying, removing or halted */
+ ret = -ESHUTDOWN;
goto out;
+ }
if (!udev->slot_id) {
xhci_dbg_trace(xhci, trace_xhci_dbg_address,
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 8ccc11a974b8..2d7b6374b58d 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1568,7 +1568,8 @@ struct xhci_hcd {
#define CMD_RING_STATE_STOPPED (1 << 2)
struct list_head cmd_list;
unsigned int cmd_ring_reserved_trbs;
- struct timer_list cmd_timer;
+ struct delayed_work cmd_timer;
+ struct completion cmd_ring_stop_completion;
struct xhci_command *current_cmd;
struct xhci_ring *event_ring;
struct xhci_erst erst;
@@ -1934,7 +1935,7 @@ void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
struct xhci_dequeue_state *deq_state);
void xhci_stop_endpoint_command_watchdog(unsigned long arg);
-void xhci_handle_command_timeout(unsigned long data);
+void xhci_handle_command_timeout(struct work_struct *work);
void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
unsigned int ep_index, unsigned int stream_id);
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 310238c6b5cd..896798071817 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -469,6 +469,7 @@ static const struct musb_platform_ops bfin_ops = {
.init = bfin_musb_init,
.exit = bfin_musb_exit,
+ .fifo_offset = bfin_fifo_offset,
.readb = bfin_readb,
.writeb = bfin_writeb,
.readw = bfin_readw,
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 9e226468a13e..fca288bbc800 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2050,6 +2050,7 @@ struct musb_pending_work {
struct list_head node;
};
+#ifdef CONFIG_PM
/*
* Called from musb_runtime_resume(), musb_resume(), and
* musb_queue_resume_work(). Callers must take musb->lock.
@@ -2077,6 +2078,7 @@ static int musb_run_resume_work(struct musb *musb)
return error;
}
+#endif
/*
* Called to run work if device is active or else queue the work to happen
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index a611e2f67bdc..ade902ea1221 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -216,6 +216,7 @@ struct musb_platform_ops {
void (*pre_root_reset_end)(struct musb *musb);
void (*post_root_reset_end)(struct musb *musb);
int (*phy_callback)(enum musb_vbus_id_status status);
+ void (*clear_ep_rxintr)(struct musb *musb, int epnum);
};
/*
@@ -626,6 +627,12 @@ static inline void musb_platform_post_root_reset_end(struct musb *musb)
musb->ops->post_root_reset_end(musb);
}
+static inline void musb_platform_clear_ep_rxintr(struct musb *musb, int epnum)
+{
+ if (musb->ops->clear_ep_rxintr)
+ musb->ops->clear_ep_rxintr(musb, epnum);
+}
+
/*
* gets the "dr_mode" property from DT and converts it into musb_mode
* if the property is not found or not recognized returns MUSB_OTG
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index feae1561b9ab..9f125e179acd 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -267,6 +267,17 @@ static void otg_timer(unsigned long _musb)
pm_runtime_put_autosuspend(dev);
}
+void dsps_musb_clear_ep_rxintr(struct musb *musb, int epnum)
+{
+ u32 epintr;
+ struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent);
+ const struct dsps_musb_wrapper *wrp = glue->wrp;
+
+ /* musb->lock might already been held */
+ epintr = (1 << epnum) << wrp->rxep_shift;
+ musb_writel(musb->ctrl_base, wrp->epintr_status, epintr);
+}
+
static irqreturn_t dsps_interrupt(int irq, void *hci)
{
struct musb *musb = hci;
@@ -622,6 +633,7 @@ static struct musb_platform_ops dsps_ops = {
.set_mode = dsps_musb_set_mode,
.recover = dsps_musb_recover,
+ .clear_ep_rxintr = dsps_musb_clear_ep_rxintr,
};
static u64 musb_dmamask = DMA_BIT_MASK(32);
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index f6cdbad00dac..ac3a4952abb4 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2374,12 +2374,11 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh)
int is_in = usb_pipein(urb->pipe);
int status = 0;
u16 csr;
+ struct dma_channel *dma = NULL;
musb_ep_select(regs, hw_end);
if (is_dma_capable()) {
- struct dma_channel *dma;
-
dma = is_in ? ep->rx_channel : ep->tx_channel;
if (dma) {
status = ep->musb->dma_controller->channel_abort(dma);
@@ -2395,10 +2394,9 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh)
/* giveback saves bulk toggle */
csr = musb_h_flush_rxfifo(ep, 0);
- /* REVISIT we still get an irq; should likely clear the
- * endpoint's irq status here to avoid bogus irqs.
- * clearing that status is platform-specific...
- */
+ /* clear the endpoint's irq status here to avoid bogus irqs */
+ if (is_dma_capable() && dma)
+ musb_platform_clear_ep_rxintr(musb, ep->epnum);
} else if (ep->epnum) {
musb_h_tx_flush_fifo(ep);
csr = musb_readw(epio, MUSB_TXCSR);
diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h
index f7b13fd25257..a3dcbd55e436 100644
--- a/drivers/usb/musb/musbhsdma.h
+++ b/drivers/usb/musb/musbhsdma.h
@@ -157,5 +157,5 @@ struct musb_dma_controller {
void __iomem *base;
u8 channel_count;
u8 used_channels;
- u8 irq;
+ int irq;
};
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 5f17a3b9916d..80260b08398b 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -50,6 +50,7 @@
#define CYBERJACK_PRODUCT_ID 0x0100
/* Function prototypes */
+static int cyberjack_attach(struct usb_serial *serial);
static int cyberjack_port_probe(struct usb_serial_port *port);
static int cyberjack_port_remove(struct usb_serial_port *port);
static int cyberjack_open(struct tty_struct *tty,
@@ -77,6 +78,7 @@ static struct usb_serial_driver cyberjack_device = {
.description = "Reiner SCT Cyberjack USB card reader",
.id_table = id_table,
.num_ports = 1,
+ .attach = cyberjack_attach,
.port_probe = cyberjack_port_probe,
.port_remove = cyberjack_port_remove,
.open = cyberjack_open,
@@ -100,6 +102,14 @@ struct cyberjack_private {
short wrsent; /* Data already sent */
};
+static int cyberjack_attach(struct usb_serial *serial)
+{
+ if (serial->num_bulk_out < serial->num_ports)
+ return -ENODEV;
+
+ return 0;
+}
+
static int cyberjack_port_probe(struct usb_serial_port *port)
{
struct cyberjack_private *priv;
diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c
index 8282a6a18fee..22f23a429a95 100644
--- a/drivers/usb/serial/f81534.c
+++ b/drivers/usb/serial/f81534.c
@@ -1237,6 +1237,7 @@ static int f81534_attach(struct usb_serial *serial)
static int f81534_port_probe(struct usb_serial_port *port)
{
struct f81534_port_private *port_priv;
+ int ret;
port_priv = devm_kzalloc(&port->dev, sizeof(*port_priv), GFP_KERNEL);
if (!port_priv)
@@ -1246,10 +1247,11 @@ static int f81534_port_probe(struct usb_serial_port *port)
mutex_init(&port_priv->mcr_mutex);
/* Assign logic-to-phy mapping */
- port_priv->phy_num = f81534_logic_to_phy_port(port->serial, port);
- if (port_priv->phy_num < 0 || port_priv->phy_num >= F81534_NUM_PORT)
- return -ENODEV;
+ ret = f81534_logic_to_phy_port(port->serial, port);
+ if (ret < 0)
+ return ret;
+ port_priv->phy_num = ret;
usb_set_serial_port_data(port, port_priv);
dev_dbg(&port->dev, "%s: port_number: %d, phy_num: %d\n", __func__,
port->port_number, port_priv->phy_num);
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 97cabf803c2f..b2f2e87aed94 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1043,6 +1043,7 @@ static int garmin_write_bulk(struct usb_serial_port *port,
"%s - usb_submit_urb(write bulk) failed with status = %d\n",
__func__, status);
count = status;
+ kfree(buffer);
}
/* we are done with this urb, so let the host driver
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index dcc0c58aaad5..d50e5773483f 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2751,6 +2751,11 @@ static int edge_startup(struct usb_serial *serial)
EDGE_COMPATIBILITY_MASK1,
EDGE_COMPATIBILITY_MASK2 };
+ if (serial->num_bulk_in < 1 || serial->num_interrupt_in < 1) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
dev = serial->dev;
/* create our private serial structure */
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index c339163698eb..9a0db2965fbb 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1499,8 +1499,7 @@ static int do_boot_mode(struct edgeport_serial *serial,
dev_dbg(dev, "%s - Download successful -- Device rebooting...\n", __func__);
- /* return an error on purpose */
- return -ENODEV;
+ return 1;
}
stayinbootmode:
@@ -1508,7 +1507,7 @@ stayinbootmode:
dev_dbg(dev, "%s - STAYING IN BOOT MODE\n", __func__);
serial->product_info.TiMode = TI_MODE_BOOT;
- return 0;
+ return 1;
}
static int ti_do_config(struct edgeport_port *port, int feature, int on)
@@ -2546,6 +2545,13 @@ static int edge_startup(struct usb_serial *serial)
int status;
u16 product_id;
+ /* Make sure we have the required endpoints when in download mode. */
+ if (serial->interface->cur_altsetting->desc.bNumEndpoints > 1) {
+ if (serial->num_bulk_in < serial->num_ports ||
+ serial->num_bulk_out < serial->num_ports)
+ return -ENODEV;
+ }
+
/* create our private serial structure */
edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
if (!edge_serial)
@@ -2553,14 +2559,18 @@ static int edge_startup(struct usb_serial *serial)
mutex_init(&edge_serial->es_lock);
edge_serial->serial = serial;
+ INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work);
usb_set_serial_data(serial, edge_serial);
status = download_fw(edge_serial);
- if (status) {
+ if (status < 0) {
kfree(edge_serial);
return status;
}
+ if (status > 0)
+ return 1; /* bind but do not register any ports */
+
product_id = le16_to_cpu(
edge_serial->serial->dev->descriptor.idProduct);
@@ -2572,7 +2582,6 @@ static int edge_startup(struct usb_serial *serial)
}
}
- INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work);
edge_heartbeat_schedule(edge_serial);
return 0;
@@ -2580,6 +2589,9 @@ static int edge_startup(struct usb_serial *serial)
static void edge_disconnect(struct usb_serial *serial)
{
+ struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
+
+ cancel_delayed_work_sync(&edge_serial->heartbeat_work);
}
static void edge_release(struct usb_serial *serial)
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 344b4eea4bd5..d57fb5199218 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -68,6 +68,16 @@ struct iuu_private {
u32 clk;
};
+static int iuu_attach(struct usb_serial *serial)
+{
+ unsigned char num_ports = serial->num_ports;
+
+ if (serial->num_bulk_in < num_ports || serial->num_bulk_out < num_ports)
+ return -ENODEV;
+
+ return 0;
+}
+
static int iuu_port_probe(struct usb_serial_port *port)
{
struct iuu_private *priv;
@@ -1196,6 +1206,7 @@ static struct usb_serial_driver iuu_device = {
.tiocmset = iuu_tiocmset,
.set_termios = iuu_set_termios,
.init_termios = iuu_init_termios,
+ .attach = iuu_attach,
.port_probe = iuu_port_probe,
.port_remove = iuu_port_remove,
};
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index e49ad0c63ad8..83523fcf6fb9 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -699,6 +699,19 @@ MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw");
MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw");
#endif
+static int keyspan_pda_attach(struct usb_serial *serial)
+{
+ unsigned char num_ports = serial->num_ports;
+
+ if (serial->num_bulk_out < num_ports ||
+ serial->num_interrupt_in < num_ports) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static int keyspan_pda_port_probe(struct usb_serial_port *port)
{
@@ -776,6 +789,7 @@ static struct usb_serial_driver keyspan_pda_device = {
.break_ctl = keyspan_pda_break_ctl,
.tiocmget = keyspan_pda_tiocmget,
.tiocmset = keyspan_pda_tiocmset,
+ .attach = keyspan_pda_attach,
.port_probe = keyspan_pda_port_probe,
.port_remove = keyspan_pda_port_remove,
};
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 2363654cafc9..813035f51fe7 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -51,6 +51,7 @@
/* Function prototypes */
+static int kobil_attach(struct usb_serial *serial);
static int kobil_port_probe(struct usb_serial_port *probe);
static int kobil_port_remove(struct usb_serial_port *probe);
static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port);
@@ -86,6 +87,7 @@ static struct usb_serial_driver kobil_device = {
.description = "KOBIL USB smart card terminal",
.id_table = id_table,
.num_ports = 1,
+ .attach = kobil_attach,
.port_probe = kobil_port_probe,
.port_remove = kobil_port_remove,
.ioctl = kobil_ioctl,
@@ -113,6 +115,16 @@ struct kobil_private {
};
+static int kobil_attach(struct usb_serial *serial)
+{
+ if (serial->num_interrupt_out < serial->num_ports) {
+ dev_err(&serial->interface->dev, "missing interrupt-out endpoint\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static int kobil_port_probe(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index d52caa03679c..91bc170b408a 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -65,8 +65,6 @@ struct moschip_port {
struct urb *write_urb_pool[NUM_URBS];
};
-static struct usb_serial_driver moschip7720_2port_driver;
-
#define USB_VENDOR_ID_MOSCHIP 0x9710
#define MOSCHIP_DEVICE_ID_7720 0x7720
#define MOSCHIP_DEVICE_ID_7715 0x7715
@@ -970,25 +968,6 @@ static void mos7720_bulk_out_data_callback(struct urb *urb)
tty_port_tty_wakeup(&mos7720_port->port->port);
}
-/*
- * mos77xx_probe
- * this function installs the appropriate read interrupt endpoint callback
- * depending on whether the device is a 7720 or 7715, thus avoiding costly
- * run-time checks in the high-frequency callback routine itself.
- */
-static int mos77xx_probe(struct usb_serial *serial,
- const struct usb_device_id *id)
-{
- if (id->idProduct == MOSCHIP_DEVICE_ID_7715)
- moschip7720_2port_driver.read_int_callback =
- mos7715_interrupt_callback;
- else
- moschip7720_2port_driver.read_int_callback =
- mos7720_interrupt_callback;
-
- return 0;
-}
-
static int mos77xx_calc_num_ports(struct usb_serial *serial)
{
u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
@@ -1917,6 +1896,11 @@ static int mos7720_startup(struct usb_serial *serial)
u16 product;
int ret_val;
+ if (serial->num_bulk_in < 2 || serial->num_bulk_out < 2) {
+ dev_err(&serial->interface->dev, "missing bulk endpoints\n");
+ return -ENODEV;
+ }
+
product = le16_to_cpu(serial->dev->descriptor.idProduct);
dev = serial->dev;
@@ -1941,19 +1925,18 @@ static int mos7720_startup(struct usb_serial *serial)
tmp->interrupt_in_endpointAddress;
serial->port[1]->interrupt_in_urb = NULL;
serial->port[1]->interrupt_in_buffer = NULL;
+
+ if (serial->port[0]->interrupt_in_urb) {
+ struct urb *urb = serial->port[0]->interrupt_in_urb;
+
+ urb->complete = mos7715_interrupt_callback;
+ }
}
/* setting configuration feature to one */
usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
(__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000);
- /* start the interrupt urb */
- ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
- if (ret_val)
- dev_err(&dev->dev,
- "%s - Error %d submitting control urb\n",
- __func__, ret_val);
-
#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
if (product == MOSCHIP_DEVICE_ID_7715) {
ret_val = mos7715_parport_init(serial);
@@ -1961,6 +1944,13 @@ static int mos7720_startup(struct usb_serial *serial)
return ret_val;
}
#endif
+ /* start the interrupt urb */
+ ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
+ if (ret_val) {
+ dev_err(&dev->dev, "failed to submit interrupt urb: %d\n",
+ ret_val);
+ }
+
/* LSR For Port 1 */
read_mos_reg(serial, 0, MOS7720_LSR, &data);
dev_dbg(&dev->dev, "LSR:%x\n", data);
@@ -1970,6 +1960,8 @@ static int mos7720_startup(struct usb_serial *serial)
static void mos7720_release(struct usb_serial *serial)
{
+ usb_kill_urb(serial->port[0]->interrupt_in_urb);
+
#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
/* close the parallel port */
@@ -2019,11 +2011,6 @@ static int mos7720_port_probe(struct usb_serial_port *port)
if (!mos7720_port)
return -ENOMEM;
- /* Initialize all port interrupt end point to port 0 int endpoint.
- * Our device has only one interrupt endpoint common to all ports.
- */
- port->interrupt_in_endpointAddress =
- port->serial->port[0]->interrupt_in_endpointAddress;
mos7720_port->port = port;
usb_set_serial_port_data(port, mos7720_port);
@@ -2053,7 +2040,6 @@ static struct usb_serial_driver moschip7720_2port_driver = {
.close = mos7720_close,
.throttle = mos7720_throttle,
.unthrottle = mos7720_unthrottle,
- .probe = mos77xx_probe,
.attach = mos7720_startup,
.release = mos7720_release,
.port_probe = mos7720_port_probe,
@@ -2067,7 +2053,7 @@ static struct usb_serial_driver moschip7720_2port_driver = {
.chars_in_buffer = mos7720_chars_in_buffer,
.break_ctl = mos7720_break,
.read_bulk_callback = mos7720_bulk_in_callback,
- .read_int_callback = NULL /* dynamically assigned in probe() */
+ .read_int_callback = mos7720_interrupt_callback,
};
static struct usb_serial_driver * const serial_drivers[] = {
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 9a220b8e810f..ea27fb23967a 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -214,7 +214,6 @@ MODULE_DEVICE_TABLE(usb, id_table);
struct moschip_port {
int port_num; /*Actual port number in the device(1,2,etc) */
- struct urb *write_urb; /* write URB for this port */
struct urb *read_urb; /* read URB for this port */
__u8 shadowLCR; /* last LCR value received */
__u8 shadowMCR; /* last MCR value received */
@@ -1037,9 +1036,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
serial,
serial->port[0]->interrupt_in_urb->interval);
- /* start interrupt read for mos7840 *
- * will continue as long as mos7840 is connected */
-
+ /* start interrupt read for mos7840 */
response =
usb_submit_urb(serial->port[0]->interrupt_in_urb,
GFP_KERNEL);
@@ -1186,7 +1183,6 @@ static void mos7840_close(struct usb_serial_port *port)
}
}
- usb_kill_urb(mos7840_port->write_urb);
usb_kill_urb(mos7840_port->read_urb);
mos7840_port->read_urb_busy = false;
@@ -1199,12 +1195,6 @@ static void mos7840_close(struct usb_serial_port *port)
}
}
- if (mos7840_port->write_urb) {
- /* if this urb had a transfer buffer already (old tx) free it */
- kfree(mos7840_port->write_urb->transfer_buffer);
- usb_free_urb(mos7840_port->write_urb);
- }
-
Data = 0x0;
mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
@@ -2113,6 +2103,17 @@ static int mos7840_calc_num_ports(struct usb_serial *serial)
return mos7840_num_ports;
}
+static int mos7840_attach(struct usb_serial *serial)
+{
+ if (serial->num_bulk_in < serial->num_ports ||
+ serial->num_bulk_out < serial->num_ports) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static int mos7840_port_probe(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
@@ -2388,6 +2389,7 @@ static struct usb_serial_driver moschip7840_4port_device = {
.tiocmset = mos7840_tiocmset,
.tiocmiwait = usb_serial_generic_tiocmiwait,
.get_icount = usb_serial_generic_get_icount,
+ .attach = mos7840_attach,
.port_probe = mos7840_port_probe,
.port_remove = mos7840_port_remove,
.read_bulk_callback = mos7840_bulk_in_callback,
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index f6c6900bccf0..a180b17d2432 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -38,6 +38,7 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static int omninet_write_room(struct tty_struct *tty);
static void omninet_disconnect(struct usb_serial *serial);
+static int omninet_attach(struct usb_serial *serial);
static int omninet_port_probe(struct usb_serial_port *port);
static int omninet_port_remove(struct usb_serial_port *port);
@@ -56,6 +57,7 @@ static struct usb_serial_driver zyxel_omninet_device = {
.description = "ZyXEL - omni.net lcd plus usb",
.id_table = id_table,
.num_ports = 1,
+ .attach = omninet_attach,
.port_probe = omninet_port_probe,
.port_remove = omninet_port_remove,
.open = omninet_open,
@@ -104,6 +106,17 @@ struct omninet_data {
__u8 od_outseq; /* Sequence number for bulk_out URBs */
};
+static int omninet_attach(struct usb_serial *serial)
+{
+ /* The second bulk-out endpoint is used for writing. */
+ if (serial->num_bulk_out < 2) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static int omninet_port_probe(struct usb_serial_port *port)
{
struct omninet_data *od;
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index a4b88bc038b6..b8bf52bf7a94 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -134,6 +134,7 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty);
static int oti6858_tiocmget(struct tty_struct *tty);
static int oti6858_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
+static int oti6858_attach(struct usb_serial *serial);
static int oti6858_port_probe(struct usb_serial_port *port);
static int oti6858_port_remove(struct usb_serial_port *port);
@@ -158,6 +159,7 @@ static struct usb_serial_driver oti6858_device = {
.write_bulk_callback = oti6858_write_bulk_callback,
.write_room = oti6858_write_room,
.chars_in_buffer = oti6858_chars_in_buffer,
+ .attach = oti6858_attach,
.port_probe = oti6858_port_probe,
.port_remove = oti6858_port_remove,
};
@@ -324,6 +326,20 @@ static void send_data(struct work_struct *work)
usb_serial_port_softint(port);
}
+static int oti6858_attach(struct usb_serial *serial)
+{
+ unsigned char num_ports = serial->num_ports;
+
+ if (serial->num_bulk_in < num_ports ||
+ serial->num_bulk_out < num_ports ||
+ serial->num_interrupt_in < num_ports) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static int oti6858_port_probe(struct usb_serial_port *port)
{
struct oti6858_private *priv;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index ae682e4eeaef..46fca6b75846 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -220,9 +220,17 @@ static int pl2303_probe(struct usb_serial *serial,
static int pl2303_startup(struct usb_serial *serial)
{
struct pl2303_serial_private *spriv;
+ unsigned char num_ports = serial->num_ports;
enum pl2303_type type = TYPE_01;
unsigned char *buf;
+ if (serial->num_bulk_in < num_ports ||
+ serial->num_bulk_out < num_ports ||
+ serial->num_interrupt_in < num_ports) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
if (!spriv)
return -ENOMEM;
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 659cb8606bd9..5709cc93b083 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -408,16 +408,12 @@ static void qt2_close(struct usb_serial_port *port)
{
struct usb_serial *serial;
struct qt2_port_private *port_priv;
- unsigned long flags;
int i;
serial = port->serial;
port_priv = usb_get_serial_port_data(port);
- spin_lock_irqsave(&port_priv->urb_lock, flags);
usb_kill_urb(port_priv->write_urb);
- port_priv->urb_in_use = false;
- spin_unlock_irqrestore(&port_priv->urb_lock, flags);
/* flush the port transmit buffer */
i = usb_control_msg(serial->dev,
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index ef0dbf0703c5..475e6c31b266 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -154,6 +154,19 @@ static int spcp8x5_probe(struct usb_serial *serial,
return 0;
}
+static int spcp8x5_attach(struct usb_serial *serial)
+{
+ unsigned char num_ports = serial->num_ports;
+
+ if (serial->num_bulk_in < num_ports ||
+ serial->num_bulk_out < num_ports) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static int spcp8x5_port_probe(struct usb_serial_port *port)
{
const struct usb_device_id *id = usb_get_serial_data(port->serial);
@@ -477,6 +490,7 @@ static struct usb_serial_driver spcp8x5_device = {
.tiocmget = spcp8x5_tiocmget,
.tiocmset = spcp8x5_tiocmset,
.probe = spcp8x5_probe,
+ .attach = spcp8x5_attach,
.port_probe = spcp8x5_port_probe,
.port_remove = spcp8x5_port_remove,
};
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 8db9d071d940..64b85b8dedf3 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -579,6 +579,13 @@ static int ti_startup(struct usb_serial *serial)
goto free_tdev;
}
+ if (serial->num_bulk_in < serial->num_ports ||
+ serial->num_bulk_out < serial->num_ports) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ status = -ENODEV;
+ goto free_tdev;
+ }
+
return 0;
free_tdev:
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index af3c7eecff91..16cc18369111 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2109,6 +2109,13 @@ UNUSUAL_DEV( 0x152d, 0x2566, 0x0114, 0x0114,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BROKEN_FUA ),
+/* Reported-by George Cherian <george.cherian@cavium.com> */
+UNUSUAL_DEV(0x152d, 0x9561, 0x0000, 0x9999,
+ "JMicron",
+ "JMS56x",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_REPORT_OPCODES),
+
/*
* Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI)
* and Mac USB Dock USB-SCSI */