summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/scsi/g_NCR5380.txt46
-rw-r--r--drivers/scsi/NCR5380.c77
-rw-r--r--drivers/scsi/NCR5380.h11
-rw-r--r--drivers/scsi/aacraid/linit.c2
-rw-r--r--drivers/scsi/g_NCR5380.c153
-rw-r--r--drivers/scsi/g_NCR5380.h2
-rw-r--r--drivers/scsi/ibmvscsi/ibmvscsi.c7
-rw-r--r--drivers/scsi/ibmvscsi/ibmvscsi.h1
-rw-r--r--drivers/scsi/ufs/ufs-qcom.c44
-rw-r--r--drivers/scsi/ufs/ufs-qcom.h1
-rw-r--r--drivers/scsi/ufs/ufs_quirks.h30
-rw-r--r--drivers/scsi/ufs/ufshcd.c55
-rw-r--r--drivers/scsi/ufs/ufshcd.h12
-rw-r--r--drivers/scsi/ufs/ufshci.h7
14 files changed, 283 insertions, 165 deletions
diff --git a/Documentation/scsi/g_NCR5380.txt b/Documentation/scsi/g_NCR5380.txt
index e2c187947e58..37b1967a00a9 100644
--- a/Documentation/scsi/g_NCR5380.txt
+++ b/Documentation/scsi/g_NCR5380.txt
@@ -6,17 +6,15 @@ NCR53c400 extensions (c) 1994,1995,1996 Kevin Lentin
This file documents the NCR53c400 extensions by Kevin Lentin and some
enhancements to the NCR5380 core.
-This driver supports both NCR5380 and NCR53c400 cards in port or memory
-mapped modes. Currently this driver can only support one of those mapping
-modes at a time but it does support both of these chips at the same time.
-The next release of this driver will support port & memory mapped cards at
-the same time. It should be able to handle multiple different cards in the
-same machine.
+This driver supports NCR5380 and NCR53c400 and compatible cards in port or
+memory mapped modes.
-The drivers/scsi/Makefile has an override in it for the most common
-NCR53c400 card, the Trantor T130B in its default configuration:
- Port: 0x350
- IRQ : 5
+Use of an interrupt is recommended, if supported by the board, as this will
+allow targets to disconnect and thereby improve SCSI bus utilization.
+
+If the irq parameter is 254 or is omitted entirely, the driver will probe
+for the correct IRQ line automatically. If the irq parameter is 0 or 255
+then no IRQ will be used.
The NCR53c400 does not support DMA but it does have Pseudo-DMA which is
supported by the driver.
@@ -47,22 +45,24 @@ These old-style parameters can support only one card:
dtc_3181e=1 to set up for a Domex Technology Corp 3181E board
hp_c2502=1 to set up for a Hewlett Packard C2502 board
-e.g.
-OLD: modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1
-NEW: modprobe g_NCR5380 irq=5 base=0x350 card=0
- for a port mapped NCR5380 board or
-
-OLD: modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
-NEW: modprobe g_NCR5380 irq=255 base=0xc8000 card=1
- for a memory mapped NCR53C400 board with interrupts disabled or
+E.g. Trantor T130B in its default configuration:
+modprobe g_NCR5380 irq=5 base=0x350 card=1
+or alternatively, using the old syntax,
+modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_53c400=1
-NEW: modprobe g_NCR5380 irq=0,7 base=0x240,0x300 card=3,4
- for two cards: DTC3181 (in non-PnP mode) at 0x240 with no IRQ
- and HP C2502 at 0x300 with IRQ 7
+E.g. a port mapped NCR5380 board, driver to probe for IRQ:
+modprobe g_NCR5380 base=0x350 card=0
+or alternatively,
+modprobe g_NCR5380 ncr_addr=0x350 ncr_5380=1
-(255 should be specified for no or DMA interrupt, 254 to autoprobe for an
- IRQ line if overridden on the command line.)
+E.g. a memory mapped NCR53C400 board with no IRQ:
+modprobe g_NCR5380 irq=255 base=0xc8000 card=1
+or alternatively,
+modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
+E.g. two cards, DTC3181 (in non-PnP mode) at 0x240 with no IRQ
+and HP C2502 at 0x300 with IRQ 7:
+modprobe g_NCR5380 irq=0,7 base=0x240,0x300 card=3,4
Kevin Lentin
K.Lentin@cs.monash.edu.au
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index d849ffa378b1..4f5ca794bb71 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -97,9 +97,6 @@
* and macros and include this file in your driver.
*
* These macros control options :
- * AUTOPROBE_IRQ - if defined, the NCR5380_probe_irq() function will be
- * defined.
- *
* AUTOSENSE - if defined, REQUEST SENSE will be performed automatically
* for commands that return with a CHECK CONDITION status.
*
@@ -127,9 +124,7 @@
* NCR5380_dma_residual - residual byte count
*
* The generic driver is initialized by calling NCR5380_init(instance),
- * after setting the appropriate host specific fields and ID. If the
- * driver wishes to autoprobe for an IRQ line, the NCR5380_probe_irq(instance,
- * possible) function may be used.
+ * after setting the appropriate host specific fields and ID.
*/
#ifndef NCR5380_io_delay
@@ -351,76 +346,6 @@ static void NCR5380_print_phase(struct Scsi_Host *instance)
}
#endif
-
-static int probe_irq;
-
-/**
- * probe_intr - helper for IRQ autoprobe
- * @irq: interrupt number
- * @dev_id: unused
- * @regs: unused
- *
- * Set a flag to indicate the IRQ in question was received. This is
- * used by the IRQ probe code.
- */
-
-static irqreturn_t probe_intr(int irq, void *dev_id)
-{
- probe_irq = irq;
- return IRQ_HANDLED;
-}
-
-/**
- * NCR5380_probe_irq - find the IRQ of an NCR5380
- * @instance: NCR5380 controller
- * @possible: bitmask of ISA IRQ lines
- *
- * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ
- * and then looking to see what interrupt actually turned up.
- */
-
-static int __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance,
- int possible)
-{
- struct NCR5380_hostdata *hostdata = shost_priv(instance);
- unsigned long timeout;
- int trying_irqs, i, mask;
-
- for (trying_irqs = 0, i = 1, mask = 2; i < 16; ++i, mask <<= 1)
- if ((mask & possible) && (request_irq(i, &probe_intr, 0, "NCR-probe", NULL) == 0))
- trying_irqs |= mask;
-
- timeout = jiffies + msecs_to_jiffies(250);
- probe_irq = NO_IRQ;
-
- /*
- * A interrupt is triggered whenever BSY = false, SEL = true
- * and a bit set in the SELECT_ENABLE_REG is asserted on the
- * SCSI bus.
- *
- * Note that the bus is only driven when the phase control signals
- * (I/O, C/D, and MSG) match those in the TCR, so we must reset that
- * to zero.
- */
-
- NCR5380_write(TARGET_COMMAND_REG, 0);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_SEL);
-
- while (probe_irq == NO_IRQ && time_before(jiffies, timeout))
- schedule_timeout_uninterruptible(1);
-
- NCR5380_write(SELECT_ENABLE_REG, 0);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
- for (i = 1, mask = 2; i < 16; ++i, mask <<= 1)
- if (trying_irqs & mask)
- free_irq(i, NULL);
-
- return probe_irq;
-}
-
/**
* NCR58380_info - report driver and host information
* @instance: relevant scsi host instance
diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h
index 3c6ce5434449..51a3567a6fb2 100644
--- a/drivers/scsi/NCR5380.h
+++ b/drivers/scsi/NCR5380.h
@@ -199,16 +199,6 @@
#define PHASE_SR_TO_TCR(phase) ((phase) >> 2)
-/*
- * These are "special" values for the irq and dma_channel fields of the
- * Scsi_Host structure
- */
-
-#define DMA_NONE 255
-#define IRQ_AUTO 254
-#define DMA_AUTO 254
-#define PORT_AUTO 0xffff /* autoprobe io port for 53c400a */
-
#ifndef NO_IRQ
#define NO_IRQ 0
#endif
@@ -290,7 +280,6 @@ static void NCR5380_print(struct Scsi_Host *instance);
#define NCR5380_dprint_phase(flg, arg) do {} while (0)
#endif
-static int NCR5380_probe_irq(struct Scsi_Host *instance, int possible);
static int NCR5380_init(struct Scsi_Host *instance, int flags);
static int NCR5380_maybe_reset_bus(struct Scsi_Host *);
static void NCR5380_exit(struct Scsi_Host *instance);
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index e4f3e22fcbd9..3ecbf20ca29f 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -160,7 +160,6 @@ static const struct pci_device_id aac_pci_tbl[] = {
{ 0x9005, 0x028b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 62 }, /* Adaptec PMC Series 6 (Tupelo) */
{ 0x9005, 0x028c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 63 }, /* Adaptec PMC Series 7 (Denali) */
{ 0x9005, 0x028d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 64 }, /* Adaptec PMC Series 8 */
- { 0x9005, 0x028f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 65 }, /* Adaptec PMC Series 9 */
{ 0,}
};
MODULE_DEVICE_TABLE(pci, aac_pci_tbl);
@@ -239,7 +238,6 @@ static struct aac_driver_ident aac_drivers[] = {
{ aac_src_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 6 (Tupelo) */
{ aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 7 (Denali) */
{ aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 8 */
- { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC } /* Adaptec PMC Series 9 */
};
/**
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index de5147a8c959..6f9665d50d84 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -37,7 +37,7 @@
#define MAX_CARDS 8
/* old-style parameters for compatibility */
-static int ncr_irq;
+static int ncr_irq = -1;
static int ncr_addr;
static int ncr_5380;
static int ncr_53c400;
@@ -52,9 +52,9 @@ module_param(ncr_53c400a, int, 0);
module_param(dtc_3181e, int, 0);
module_param(hp_c2502, int, 0);
-static int irq[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
+static int irq[] = { -1, -1, -1, -1, -1, -1, -1, -1 };
module_param_array(irq, int, NULL, 0);
-MODULE_PARM_DESC(irq, "IRQ number(s)");
+MODULE_PARM_DESC(irq, "IRQ number(s) (0=none, 254=auto [default])");
static int base[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
module_param_array(base, int, NULL, 0);
@@ -67,6 +67,56 @@ MODULE_PARM_DESC(card, "card type (0=NCR5380, 1=NCR53C400, 2=NCR53C400A, 3=DTC31
MODULE_ALIAS("g_NCR5380_mmio");
MODULE_LICENSE("GPL");
+static void g_NCR5380_trigger_irq(struct Scsi_Host *instance)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ /*
+ * An interrupt is triggered whenever BSY = false, SEL = true
+ * and a bit set in the SELECT_ENABLE_REG is asserted on the
+ * SCSI bus.
+ *
+ * Note that the bus is only driven when the phase control signals
+ * (I/O, C/D, and MSG) match those in the TCR.
+ */
+ NCR5380_write(TARGET_COMMAND_REG,
+ PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG) & PHASE_MASK));
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
+ NCR5380_write(INITIATOR_COMMAND_REG,
+ ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_SEL);
+
+ msleep(1);
+
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ NCR5380_write(SELECT_ENABLE_REG, 0);
+ NCR5380_write(TARGET_COMMAND_REG, 0);
+}
+
+/**
+ * g_NCR5380_probe_irq - find the IRQ of a NCR5380 or equivalent
+ * @instance: SCSI host instance
+ *
+ * Autoprobe for the IRQ line used by the card by triggering an IRQ
+ * and then looking to see what interrupt actually turned up.
+ */
+
+static int g_NCR5380_probe_irq(struct Scsi_Host *instance)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ int irq_mask, irq;
+
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ irq_mask = probe_irq_on();
+ g_NCR5380_trigger_irq(instance);
+ irq = probe_irq_off(irq_mask);
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+
+ if (irq <= 0)
+ return NO_IRQ;
+ return irq;
+}
+
/*
* Configure I/O address of 53C400A or DTC436 by writing magic numbers
* to ports 0x779 and 0x379.
@@ -81,14 +131,33 @@ static void magic_configure(int idx, u8 irq, u8 magic[])
outb(magic[3], 0x379);
outb(magic[4], 0x379);
- /* allowed IRQs for HP C2502 */
- if (irq != 2 && irq != 3 && irq != 4 && irq != 5 && irq != 7)
- irq = 0;
+ if (irq == 9)
+ irq = 2;
+
if (idx >= 0 && idx <= 7)
cfg = 0x80 | idx | (irq << 4);
outb(cfg, 0x379);
}
+static irqreturn_t legacy_empty_irq_handler(int irq, void *dev_id)
+{
+ return IRQ_HANDLED;
+}
+
+static int legacy_find_free_irq(int *irq_table)
+{
+ while (*irq_table != -1) {
+ if (!request_irq(*irq_table, legacy_empty_irq_handler,
+ IRQF_PROBE_SHARED, "Test IRQ",
+ (void *)irq_table)) {
+ free_irq(*irq_table, (void *) irq_table);
+ return *irq_table;
+ }
+ irq_table++;
+ }
+ return -1;
+}
+
static unsigned int ncr_53c400a_ports[] = {
0x280, 0x290, 0x300, 0x310, 0x330, 0x340, 0x348, 0x350, 0
};
@@ -101,6 +170,9 @@ static u8 ncr_53c400a_magic[] = { /* 53C400A & DTC436 */
static u8 hp_c2502_magic[] = { /* HP C2502 */
0x0f, 0x22, 0xf0, 0x20, 0x80
};
+static int hp_c2502_irqs[] = {
+ 9, 5, 7, 3, 4, -1
+};
static int generic_NCR5380_init_one(struct scsi_host_template *tpnt,
struct device *pdev, int base, int irq, int board)
@@ -248,6 +320,13 @@ static int generic_NCR5380_init_one(struct scsi_host_template *tpnt,
}
}
+ /* Check for vacant slot */
+ NCR5380_write(MODE_REG, 0);
+ if (NCR5380_read(MODE_REG) != 0) {
+ ret = -ENODEV;
+ goto out_unregister;
+ }
+
ret = NCR5380_init(instance, flags | FLAG_LATE_DMA_SETUP);
if (ret)
goto out_unregister;
@@ -262,31 +341,59 @@ static int generic_NCR5380_init_one(struct scsi_host_template *tpnt,
NCR5380_maybe_reset_bus(instance);
- if (irq != IRQ_AUTO)
- instance->irq = irq;
- else
- instance->irq = NCR5380_probe_irq(instance, 0xffff);
-
/* Compatibility with documented NCR5380 kernel parameters */
- if (instance->irq == 255)
- instance->irq = NO_IRQ;
+ if (irq == 255 || irq == 0)
+ irq = NO_IRQ;
+ else if (irq == -1)
+ irq = IRQ_AUTO;
+
+ if (board == BOARD_HP_C2502) {
+ int *irq_table = hp_c2502_irqs;
+ int board_irq = -1;
+
+ switch (irq) {
+ case NO_IRQ:
+ board_irq = 0;
+ break;
+ case IRQ_AUTO:
+ board_irq = legacy_find_free_irq(irq_table);
+ break;
+ default:
+ while (*irq_table != -1)
+ if (*irq_table++ == irq)
+ board_irq = irq;
+ }
+
+ if (board_irq <= 0) {
+ board_irq = 0;
+ irq = NO_IRQ;
+ }
+
+ magic_configure(port_idx, board_irq, magic);
+ }
+
+ if (irq == IRQ_AUTO) {
+ instance->irq = g_NCR5380_probe_irq(instance);
+ if (instance->irq == NO_IRQ)
+ shost_printk(KERN_INFO, instance, "no irq detected\n");
+ } else {
+ instance->irq = irq;
+ if (instance->irq == NO_IRQ)
+ shost_printk(KERN_INFO, instance, "no irq provided\n");
+ }
if (instance->irq != NO_IRQ) {
- /* set IRQ for HP C2502 */
- if (board == BOARD_HP_C2502)
- magic_configure(port_idx, instance->irq, magic);
if (request_irq(instance->irq, generic_NCR5380_intr,
0, "NCR5380", instance)) {
- printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
instance->irq = NO_IRQ;
+ shost_printk(KERN_INFO, instance,
+ "irq %d denied\n", instance->irq);
+ } else {
+ shost_printk(KERN_INFO, instance,
+ "irq %d acquired\n", instance->irq);
}
}
- if (instance->irq == NO_IRQ) {
- printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
- printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
- }
-
ret = scsi_add_host(instance, pdev);
if (ret)
goto out_free_irq;
@@ -597,7 +704,7 @@ static int __init generic_NCR5380_init(void)
int ret = 0;
/* compatibility with old-style parameters */
- if (irq[0] == 0 && base[0] == 0 && card[0] == -1) {
+ if (irq[0] == -1 && base[0] == 0 && card[0] == -1) {
irq[0] = ncr_irq;
base[0] = ncr_addr;
if (ncr_5380)
diff --git a/drivers/scsi/g_NCR5380.h b/drivers/scsi/g_NCR5380.h
index 3ce5b65ccb00..81b22d989648 100644
--- a/drivers/scsi/g_NCR5380.h
+++ b/drivers/scsi/g_NCR5380.h
@@ -51,4 +51,6 @@
#define BOARD_DTC3181E 3
#define BOARD_HP_C2502 4
+#define IRQ_AUTO 254
+
#endif /* GENERIC_NCR5380_H */
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index d9534ee6ef52..50cd01165e35 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -95,6 +95,7 @@ static int fast_fail = 1;
static int client_reserve = 1;
static char partition_name[97] = "UNKNOWN";
static unsigned int partition_number = -1;
+static LIST_HEAD(ibmvscsi_head);
static struct scsi_transport_template *ibmvscsi_transport_template;
@@ -232,6 +233,7 @@ static void ibmvscsi_task(void *data)
while ((crq = crq_queue_next_crq(&hostdata->queue)) != NULL) {
ibmvscsi_handle_crq(crq, hostdata);
crq->valid = VIOSRP_CRQ_FREE;
+ wmb();
}
vio_enable_interrupts(vdev);
@@ -240,6 +242,7 @@ static void ibmvscsi_task(void *data)
vio_disable_interrupts(vdev);
ibmvscsi_handle_crq(crq, hostdata);
crq->valid = VIOSRP_CRQ_FREE;
+ wmb();
} else {
done = 1;
}
@@ -992,7 +995,7 @@ static void handle_cmd_rsp(struct srp_event_struct *evt_struct)
if (unlikely(rsp->opcode != SRP_RSP)) {
if (printk_ratelimit())
dev_warn(evt_struct->hostdata->dev,
- "bad SRP RSP type %d\n", rsp->opcode);
+ "bad SRP RSP type %#02x\n", rsp->opcode);
}
if (cmnd) {
@@ -2270,6 +2273,7 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
}
dev_set_drvdata(&vdev->dev, hostdata);
+ list_add_tail(&hostdata->host_list, &ibmvscsi_head);
return 0;
add_srp_port_failed:
@@ -2291,6 +2295,7 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
static int ibmvscsi_remove(struct vio_dev *vdev)
{
struct ibmvscsi_host_data *hostdata = dev_get_drvdata(&vdev->dev);
+ list_del(&hostdata->host_list);
unmap_persist_bufs(hostdata);
release_event_pool(&hostdata->pool, hostdata);
ibmvscsi_release_crq_queue(&hostdata->queue, hostdata,
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.h b/drivers/scsi/ibmvscsi/ibmvscsi.h
index e0f6c3aeb4ee..3a7875575616 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.h
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.h
@@ -90,6 +90,7 @@ struct event_pool {
/* all driver data associated with a host adapter */
struct ibmvscsi_host_data {
+ struct list_head host_list;
atomic_t request_limit;
int client_migrated;
int reset_crq;
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index aa43bfea0d00..abe617372661 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -23,6 +23,7 @@
#include "unipro.h"
#include "ufs-qcom.h"
#include "ufshci.h"
+#include "ufs_quirks.h"
#define UFS_QCOM_DEFAULT_DBG_PRINT_EN \
(UFS_QCOM_DBG_PRINT_REGS_EN | UFS_QCOM_DBG_PRINT_TEST_BUS_EN)
@@ -1031,6 +1032,34 @@ out:
return ret;
}
+static int ufs_qcom_quirk_host_pa_saveconfigtime(struct ufs_hba *hba)
+{
+ int err;
+ u32 pa_vs_config_reg1;
+
+ err = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1),
+ &pa_vs_config_reg1);
+ if (err)
+ goto out;
+
+ /* Allow extension of MSB bits of PA_SaveConfigTime attribute */
+ err = ufshcd_dme_set(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1),
+ (pa_vs_config_reg1 | (1 << 12)));
+
+out:
+ return err;
+}
+
+static int ufs_qcom_apply_dev_quirks(struct ufs_hba *hba)
+{
+ int err = 0;
+
+ if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME)
+ err = ufs_qcom_quirk_host_pa_saveconfigtime(hba);
+
+ return err;
+}
+
static u32 ufs_qcom_get_ufs_hci_version(struct ufs_hba *hba)
{
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
@@ -1194,7 +1223,16 @@ static int ufs_qcom_init(struct ufs_hba *hba)
*/
host->generic_phy = devm_phy_get(dev, "ufsphy");
- if (IS_ERR(host->generic_phy)) {
+ if (host->generic_phy == ERR_PTR(-EPROBE_DEFER)) {
+ /*
+ * UFS driver might be probed before the phy driver does.
+ * In that case we would like to return EPROBE_DEFER code.
+ */
+ err = -EPROBE_DEFER;
+ dev_warn(dev, "%s: required phy device. hasn't probed yet. err = %d\n",
+ __func__, err);
+ goto out_variant_clear;
+ } else if (IS_ERR(host->generic_phy)) {
err = PTR_ERR(host->generic_phy);
dev_err(dev, "%s: PHY get failed %d\n", __func__, err);
goto out_variant_clear;
@@ -1432,7 +1470,8 @@ static void ufs_qcom_print_hw_debug_reg_all(struct ufs_hba *hba,
reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_PRDT_RAM);
print_fn(hba, reg, 64, "UFS_UFS_DBG_RD_PRDT_RAM ", priv);
- ufshcd_writel(hba, (reg & ~UFS_BIT(17)), REG_UFS_CFG1);
+ /* clear bit 17 - UTP_DBG_RAMS_EN */
+ ufshcd_rmwl(hba, UFS_BIT(17), 0, REG_UFS_CFG1);
reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_UAWM);
print_fn(hba, reg, 4, "UFS_DBG_RD_REG_UAWM ", priv);
@@ -1609,6 +1648,7 @@ static struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
.hce_enable_notify = ufs_qcom_hce_enable_notify,
.link_startup_notify = ufs_qcom_link_startup_notify,
.pwr_change_notify = ufs_qcom_pwr_change_notify,
+ .apply_dev_quirks = ufs_qcom_apply_dev_quirks,
.suspend = ufs_qcom_suspend,
.resume = ufs_qcom_resume,
.dbg_register_dump = ufs_qcom_dump_dbg_regs,
diff --git a/drivers/scsi/ufs/ufs-qcom.h b/drivers/scsi/ufs/ufs-qcom.h
index a19307a57ce2..fe517cd7dac3 100644
--- a/drivers/scsi/ufs/ufs-qcom.h
+++ b/drivers/scsi/ufs/ufs-qcom.h
@@ -142,6 +142,7 @@ enum ufs_qcom_phy_init_type {
UFS_QCOM_DBG_PRINT_TEST_BUS_EN)
/* QUniPro Vendor specific attributes */
+#define PA_VS_CONFIG_REG1 0x9000
#define DME_VS_CORE_CLK_CTRL 0xD002
/* bit and mask definitions for DME_VS_CORE_CLK_CTRL attribute */
#define DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT BIT(8)
diff --git a/drivers/scsi/ufs/ufs_quirks.h b/drivers/scsi/ufs/ufs_quirks.h
index f7983058f3f7..08b799d4efcc 100644
--- a/drivers/scsi/ufs/ufs_quirks.h
+++ b/drivers/scsi/ufs/ufs_quirks.h
@@ -134,29 +134,17 @@ struct ufs_dev_fix {
*/
#define UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE (1 << 7)
+/*
+ * The max. value PA_SaveConfigTime is 250 (10us) but this is not enough for
+ * some vendors.
+ * Gear switch from PWM to HS may fail even with this max. PA_SaveConfigTime.
+ * Gear switch can be issued by host controller as an error recovery and any
+ * software delay will not help on this case so we need to increase
+ * PA_SaveConfigTime to >32us as per vendor recommendation.
+ */
+#define UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME (1 << 8)
struct ufs_hba;
void ufs_advertise_fixup_device(struct ufs_hba *hba);
-static struct ufs_dev_fix ufs_fixups[] = {
- /* UFS cards deviations table */
- UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
- UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
- UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ),
- UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
- UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS),
- UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
- UFS_DEVICE_NO_FASTAUTO),
- UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
- UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE),
- UFS_FIX(UFS_VENDOR_TOSHIBA, UFS_ANY_MODEL,
- UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
- UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9C8KBADG",
- UFS_DEVICE_QUIRK_PA_TACTIVATE),
- UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9D8KBADG",
- UFS_DEVICE_QUIRK_PA_TACTIVATE),
- UFS_FIX(UFS_VENDOR_SKHYNIX, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ),
-
- END_FIX
-};
#endif /* UFS_QUIRKS_H_ */
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index ef8548c3a423..a2c2817fc566 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -185,6 +185,30 @@ ufs_get_pm_lvl_to_link_pwr_state(enum ufs_pm_level lvl)
return ufs_pm_lvl_states[lvl].link_state;
}
+static struct ufs_dev_fix ufs_fixups[] = {
+ /* UFS cards deviations table */
+ UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
+ UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
+ UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ),
+ UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
+ UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS),
+ UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
+ UFS_DEVICE_NO_FASTAUTO),
+ UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
+ UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE),
+ UFS_FIX(UFS_VENDOR_TOSHIBA, UFS_ANY_MODEL,
+ UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
+ UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9C8KBADG",
+ UFS_DEVICE_QUIRK_PA_TACTIVATE),
+ UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9D8KBADG",
+ UFS_DEVICE_QUIRK_PA_TACTIVATE),
+ UFS_FIX(UFS_VENDOR_SKHYNIX, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ),
+ UFS_FIX(UFS_VENDOR_SKHYNIX, UFS_ANY_MODEL,
+ UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME),
+
+ END_FIX
+};
+
static void ufshcd_tmc_handler(struct ufs_hba *hba);
static void ufshcd_async_scan(void *data, async_cookie_t cookie);
static int ufshcd_reset_and_restore(struct ufs_hba *hba);
@@ -288,10 +312,24 @@ int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask,
*/
static inline u32 ufshcd_get_intr_mask(struct ufs_hba *hba)
{
- if (hba->ufs_version == UFSHCI_VERSION_10)
- return INTERRUPT_MASK_ALL_VER_10;
- else
- return INTERRUPT_MASK_ALL_VER_11;
+ u32 intr_mask = 0;
+
+ switch (hba->ufs_version) {
+ case UFSHCI_VERSION_10:
+ intr_mask = INTERRUPT_MASK_ALL_VER_10;
+ break;
+ /* allow fall through */
+ case UFSHCI_VERSION_11:
+ case UFSHCI_VERSION_20:
+ intr_mask = INTERRUPT_MASK_ALL_VER_11;
+ break;
+ /* allow fall through */
+ case UFSHCI_VERSION_21:
+ default:
+ intr_mask = INTERRUPT_MASK_ALL_VER_21;
+ }
+
+ return intr_mask;
}
/**
@@ -5199,6 +5237,8 @@ static void ufshcd_tune_unipro_params(struct ufs_hba *hba)
if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE)
ufshcd_quirk_tune_host_pa_tactivate(hba);
+
+ ufshcd_vops_apply_dev_quirks(hba);
}
/**
@@ -6667,6 +6707,13 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
/* Get UFS version supported by the controller */
hba->ufs_version = ufshcd_get_ufs_version(hba);
+ if ((hba->ufs_version != UFSHCI_VERSION_10) &&
+ (hba->ufs_version != UFSHCI_VERSION_11) &&
+ (hba->ufs_version != UFSHCI_VERSION_20) &&
+ (hba->ufs_version != UFSHCI_VERSION_21))
+ dev_err(hba->dev, "invalid UFS version 0x%x\n",
+ hba->ufs_version);
+
/* Get Interrupt bit mask per version */
hba->intr_mask = ufshcd_get_intr_mask(hba);
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 7d9ff22acfea..08cd26ed2382 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -266,7 +266,7 @@ struct ufs_pwr_mode_info {
* @setup_task_mgmt: called before any task management request is issued
* to set some things
* @hibern8_notify: called around hibern8 enter/exit
- * to configure some things
+ * @apply_dev_quirks: called to apply device specific quirks
* @suspend: called during host controller PM callback
* @resume: called during host controller PM callback
* @dbg_register_dump: used to dump controller debug information
@@ -293,7 +293,8 @@ struct ufs_hba_variant_ops {
void (*setup_xfer_req)(struct ufs_hba *, int, bool);
void (*setup_task_mgmt)(struct ufs_hba *, int, u8);
void (*hibern8_notify)(struct ufs_hba *, enum uic_cmd_dme,
- enum ufs_notify_change_status);
+ enum ufs_notify_change_status);
+ int (*apply_dev_quirks)(struct ufs_hba *);
int (*suspend)(struct ufs_hba *, enum ufs_pm_op);
int (*resume)(struct ufs_hba *, enum ufs_pm_op);
void (*dbg_register_dump)(struct ufs_hba *hba);
@@ -839,6 +840,13 @@ static inline void ufshcd_vops_hibern8_notify(struct ufs_hba *hba,
return hba->vops->hibern8_notify(hba, cmd, status);
}
+static inline int ufshcd_vops_apply_dev_quirks(struct ufs_hba *hba)
+{
+ if (hba->vops && hba->vops->apply_dev_quirks)
+ return hba->vops->apply_dev_quirks(hba);
+ return 0;
+}
+
static inline int ufshcd_vops_suspend(struct ufs_hba *hba, enum ufs_pm_op op)
{
if (hba->vops && hba->vops->suspend)
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
index 5d978867be57..8c5190e2e1c9 100644
--- a/drivers/scsi/ufs/ufshci.h
+++ b/drivers/scsi/ufs/ufshci.h
@@ -72,6 +72,10 @@ enum {
REG_UIC_COMMAND_ARG_1 = 0x94,
REG_UIC_COMMAND_ARG_2 = 0x98,
REG_UIC_COMMAND_ARG_3 = 0x9C,
+ REG_UFS_CCAP = 0x100,
+ REG_UFS_CRYPTOCAP = 0x104,
+
+ UFSHCI_CRYPTO_REG_SPACE_SIZE = 0x400,
};
/* Controller capability masks */
@@ -275,6 +279,9 @@ enum {
/* Interrupt disable mask for UFSHCI v1.1 */
INTERRUPT_MASK_ALL_VER_11 = 0x31FFF,
+
+ /* Interrupt disable mask for UFSHCI v2.1 */
+ INTERRUPT_MASK_ALL_VER_21 = 0x71FFF,
};
/*