summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-04-13 16:42:16 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2015-04-13 16:42:16 -0700
commita1480a166dd509f25f90e824411cb488fa9fff7e (patch)
treef90633d00164827e002e79b8d26c130c0db25f33 /drivers
parent45141eeafefdb8998d2ab1f87c2afe0457059b47 (diff)
parentc54c719b558e0eb3ba60b1390aeb47ed25ff4352 (diff)
Merge branch 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo: - Hannes's patchset implements support for better error reporting introduced by the new ATA command spec. - the deperecated pci_ dma API usages have been replaced by dma_ ones. - a bunch of hardware specific updates and some cleanups. * 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: remove deprecated use of pci api ahci: st: st_configure_oob must be called after IP is clocked. ahci: st: Update the ahci_st DT documentation ahci: st: Update the DT example for how to obtain the PHY. sata_dwc_460ex: indent an if statement libata: Add tracepoints libata-eh: Set 'information' field for autosense libata: Implement support for sense data reporting libata: Implement NCQ autosense libata: use status bit definitions in ata_dump_status() ide,ata: Rename ATA_IDX to ATA_SENSE libata: whitespace fixes in ata_to_sense_error() libata: whitespace cleanup in ata_get_cmd_descript() libata: use READ_LOG_DMA_EXT libata: remove ATA_FLAG_LOWTAG sata_dwc_460ex: re-use hsdev->dev instead of dwc_dev sata_dwc_460ex: move to generic DMA driver sata_dwc_460ex: join messages back sata: xgene: add ACPI support for APM X-Gene SATA ports ata: sata_mv: add proper definitions for LP_PHY_CTL register values
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ata/Makefile3
-rw-r--r--drivers/ata/acard-ahci.c10
-rw-r--r--drivers/ata/ahci.c10
-rw-r--r--drivers/ata/ahci_st.c6
-rw-r--r--drivers/ata/ahci_xgene.c10
-rw-r--r--drivers/ata/libata-core.c32
-rw-r--r--drivers/ata/libata-eh.c168
-rw-r--r--drivers/ata/libata-scsi.c116
-rw-r--r--drivers/ata/libata-sff.c4
-rw-r--r--drivers/ata/libata-trace.c151
-rw-r--r--drivers/ata/libata.h6
-rw-r--r--drivers/ata/pata_atp867x.c4
-rw-r--r--drivers/ata/pata_cs5520.c4
-rw-r--r--drivers/ata/pata_hpt3x3.c4
-rw-r--r--drivers/ata/pata_ninja32.c4
-rw-r--r--drivers/ata/pata_pdc2027x.c4
-rw-r--r--drivers/ata/pata_scc.c4
-rw-r--r--drivers/ata/pata_sil680.c4
-rw-r--r--drivers/ata/pdc_adma.c4
-rw-r--r--drivers/ata/sata_dwc_460ex.c848
-rw-r--r--drivers/ata/sata_inic162x.c4
-rw-r--r--drivers/ata/sata_mv.c30
-rw-r--r--drivers/ata/sata_nv.c12
-rw-r--r--drivers/ata/sata_promise.c4
-rw-r--r--drivers/ata/sata_qstor.c10
-rw-r--r--drivers/ata/sata_sil.c4
-rw-r--r--drivers/ata/sata_sil24.c12
-rw-r--r--drivers/ata/sata_svw.c4
-rw-r--r--drivers/ata/sata_sx4.c4
-rw-r--r--drivers/ata/sata_via.c4
-rw-r--r--drivers/ata/sata_vsc.c4
-rw-r--r--drivers/ide/ide-lib.c4
-rw-r--r--drivers/ide/ide-probe.c2
-rw-r--r--drivers/scsi/scsi_error.c31
34 files changed, 707 insertions, 818 deletions
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index ae41107afc1f..b67e995179a9 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -111,7 +111,8 @@ obj-$(CONFIG_ATA_GENERIC) += ata_generic.o
# Should be last libata driver
obj-$(CONFIG_PATA_LEGACY) += pata_legacy.o
-libata-y := libata-core.o libata-scsi.o libata-eh.o libata-transport.o
+libata-y := libata-core.o libata-scsi.o libata-eh.o \
+ libata-transport.o libata-trace.o
libata-$(CONFIG_ATA_SFF) += libata-sff.o
libata-$(CONFIG_SATA_PMP) += libata-pmp.o
libata-$(CONFIG_ATA_ACPI) += libata-acpi.o
diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c
index c962886d7e71..12489ce863c4 100644
--- a/drivers/ata/acard-ahci.c
+++ b/drivers/ata/acard-ahci.c
@@ -181,10 +181,10 @@ static int acard_ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
int rc;
if (using_dac &&
- !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
+ rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
if (rc) {
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev,
"64-bit DMA enable failed\n");
@@ -192,12 +192,12 @@ static int acard_ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
}
}
} else {
- rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
}
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev,
"32-bit consistent DMA enable failed\n");
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 33bb06e006c9..c7a92a743ed0 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -738,10 +738,10 @@ static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
return 0;
if (using_dac &&
- !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
+ rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
if (rc) {
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev,
"64-bit DMA enable failed\n");
@@ -749,12 +749,12 @@ static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
}
}
} else {
- rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
}
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev,
"32-bit consistent DMA enable failed\n");
diff --git a/drivers/ata/ahci_st.c b/drivers/ata/ahci_st.c
index bc971af262e7..ea0ff005b86c 100644
--- a/drivers/ata/ahci_st.c
+++ b/drivers/ata/ahci_st.c
@@ -68,8 +68,6 @@ static int st_ahci_deassert_resets(struct device *dev)
}
}
- st_ahci_configure_oob(drv_data->hpriv->mmio);
-
if (drv_data->sw_rst) {
err = reset_control_deassert(drv_data->sw_rst);
if (err) {
@@ -172,6 +170,8 @@ static int st_ahci_probe(struct platform_device *pdev)
if (err)
return err;
+ st_ahci_configure_oob(drv_data->hpriv->mmio);
+
err = ahci_platform_init_host(pdev, hpriv, &st_ahci_port_info,
&ahci_platform_sht);
if (err) {
@@ -222,6 +222,8 @@ static int st_ahci_resume(struct device *dev)
return err;
}
+ st_ahci_configure_oob(drv_data->hpriv->mmio);
+
return ahci_platform_resume_host(dev);
}
#endif
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index 2e8bb603e447..2b78510d94dd 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -22,6 +22,7 @@
* NOTE: PM support is not currently available.
*
*/
+#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/ahci_platform.h>
@@ -718,6 +719,14 @@ disable_resources:
return rc;
}
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id xgene_ahci_acpi_match[] = {
+ { "APMC0D0D", },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, xgene_ahci_acpi_match);
+#endif
+
static const struct of_device_id xgene_ahci_of_match[] = {
{.compatible = "apm,xgene-ahci"},
{},
@@ -730,6 +739,7 @@ static struct platform_driver xgene_ahci_driver = {
.driver = {
.name = DRV_NAME,
.of_match_table = xgene_ahci_of_match,
+ .acpi_match_table = ACPI_PTR(xgene_ahci_acpi_match),
},
};
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 23dac3babfe3..f6cb1f1b30b7 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -70,6 +70,9 @@
#include <linux/pm_runtime.h>
#include <linux/platform_device.h>
+#define CREATE_TRACE_POINTS
+#include <trace/events/libata.h>
+
#include "libata.h"
#include "libata-transport.h"
@@ -691,11 +694,11 @@ static int ata_rwcmd_protocol(struct ata_taskfile *tf, struct ata_device *dev)
* RETURNS:
* Block address read from @tf.
*/
-u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev)
+u64 ata_tf_read_block(const struct ata_taskfile *tf, struct ata_device *dev)
{
u64 block = 0;
- if (tf->flags & ATA_TFLAG_LBA) {
+ if (!dev || tf->flags & ATA_TFLAG_LBA) {
if (tf->flags & ATA_TFLAG_LBA48) {
block |= (u64)tf->hob_lbah << 40;
block |= (u64)tf->hob_lbam << 32;
@@ -2144,6 +2147,24 @@ static int ata_dev_config_ncq(struct ata_device *dev,
return 0;
}
+static void ata_dev_config_sense_reporting(struct ata_device *dev)
+{
+ unsigned int err_mask;
+
+ if (!ata_id_has_sense_reporting(dev->id))
+ return;
+
+ if (ata_id_sense_reporting_enabled(dev->id))
+ return;
+
+ err_mask = ata_dev_set_feature(dev, SETFEATURE_SENSE_DATA, 0x1);
+ if (err_mask) {
+ ata_dev_dbg(dev,
+ "failed to enable Sense Data Reporting, Emask 0x%x\n",
+ err_mask);
+ }
+}
+
/**
* ata_dev_configure - Configure the specified ATA/ATAPI device
* @dev: Target device to configure
@@ -2366,7 +2387,7 @@ int ata_dev_configure(struct ata_device *dev)
dev->devslp_timing[i] = sata_setting[j];
}
}
-
+ ata_dev_config_sense_reporting(dev);
dev->cdb_len = 16;
}
@@ -4897,6 +4918,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
*/
if (unlikely(ata_tag_internal(qc->tag))) {
fill_result_tf(qc);
+ trace_ata_qc_complete_internal(qc);
__ata_qc_complete(qc);
return;
}
@@ -4907,6 +4929,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
*/
if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) {
fill_result_tf(qc);
+ trace_ata_qc_complete_failed(qc);
ata_qc_schedule_eh(qc);
return;
}
@@ -4917,6 +4940,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
if (qc->flags & ATA_QCFLAG_RESULT_TF)
fill_result_tf(qc);
+ trace_ata_qc_complete_done(qc);
/* Some commands need post-processing after successful
* completion.
*/
@@ -5064,7 +5088,7 @@ void ata_qc_issue(struct ata_queued_cmd *qc)
}
ap->ops->qc_prep(qc);
-
+ trace_ata_qc_issue(qc);
qc->err_mask |= ap->ops->qc_issue(qc);
if (unlikely(qc->err_mask))
goto err;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index d2029a462e2c..07f41be38fbe 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -46,6 +46,7 @@
#include <linux/libata.h>
+#include <trace/events/libata.h>
#include "libata.h"
enum {
@@ -1510,13 +1511,18 @@ unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
DPRINTK("read log page - log 0x%x, page 0x%x\n", log, page);
ata_tf_init(dev, &tf);
- tf.command = ATA_CMD_READ_LOG_EXT;
+ if (dev->dma_mode && ata_id_has_read_log_dma_ext(dev->id)) {
+ tf.command = ATA_CMD_READ_LOG_DMA_EXT;
+ tf.protocol = ATA_PROT_DMA;
+ } else {
+ tf.command = ATA_CMD_READ_LOG_EXT;
+ tf.protocol = ATA_PROT_PIO;
+ }
tf.lbal = log;
tf.lbam = page;
tf.nsect = sectors;
tf.hob_nsect = sectors >> 8;
tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE;
- tf.protocol = ATA_PROT_PIO;
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE,
buf, sectors * ATA_SECT_SIZE, 0);
@@ -1575,6 +1581,8 @@ static int ata_eh_read_log_10h(struct ata_device *dev,
tf->hob_lbah = buf[10];
tf->nsect = buf[12];
tf->hob_nsect = buf[13];
+ if (ata_id_has_ncq_autosense(dev->id))
+ tf->auxiliary = buf[14] << 16 | buf[15] << 8 | buf[16];
return 0;
}
@@ -1611,6 +1619,70 @@ unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key)
}
/**
+ * ata_eh_request_sense - perform REQUEST_SENSE_DATA_EXT
+ * @dev: device to perform REQUEST_SENSE_SENSE_DATA_EXT to
+ * @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long)
+ * @dfl_sense_key: default sense key to use
+ *
+ * Perform REQUEST_SENSE_DATA_EXT after the device reported CHECK
+ * SENSE. This function is EH helper.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ *
+ * RETURNS:
+ * encoded sense data on success, 0 on failure or if sense data
+ * is not available.
+ */
+static u32 ata_eh_request_sense(struct ata_queued_cmd *qc,
+ struct scsi_cmnd *cmd)
+{
+ struct ata_device *dev = qc->dev;
+ struct ata_taskfile tf;
+ unsigned int err_mask;
+
+ if (!cmd)
+ return 0;
+
+ DPRINTK("ATA request sense\n");
+ ata_dev_warn(dev, "request sense\n");
+ if (!ata_id_sense_reporting_enabled(dev->id)) {
+ ata_dev_warn(qc->dev, "sense data reporting disabled\n");
+ return 0;
+ }
+ ata_tf_init(dev, &tf);
+
+ tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ tf.flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
+ tf.command = ATA_CMD_REQ_SENSE_DATA;
+ tf.protocol = ATA_PROT_NODATA;
+
+ err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
+ /*
+ * ACS-4 states:
+ * The device may set the SENSE DATA AVAILABLE bit to one in the
+ * STATUS field and clear the ERROR bit to zero in the STATUS field
+ * to indicate that the command returned completion without an error
+ * and the sense data described in table 306 is available.
+ *
+ * IOW the 'ATA_SENSE' bit might not be set even though valid
+ * sense data is available.
+ * So check for both.
+ */
+ if ((tf.command & ATA_SENSE) ||
+ tf.lbah != 0 || tf.lbam != 0 || tf.lbal != 0) {
+ ata_scsi_set_sense(cmd, tf.lbah, tf.lbam, tf.lbal);
+ qc->flags |= ATA_QCFLAG_SENSE_VALID;
+ ata_dev_warn(dev, "sense data %02x/%02x/%02x\n",
+ tf.lbah, tf.lbam, tf.lbal);
+ } else {
+ ata_dev_warn(dev, "request sense failed stat %02x emask %x\n",
+ tf.command, err_mask);
+ }
+ return err_mask;
+}
+
+/**
* atapi_eh_request_sense - perform ATAPI REQUEST_SENSE
* @dev: device to perform REQUEST_SENSE to
* @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long)
@@ -1772,6 +1844,19 @@ void ata_eh_analyze_ncq_error(struct ata_link *link)
memcpy(&qc->result_tf, &tf, sizeof(tf));
qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ;
+ if (qc->result_tf.auxiliary) {
+ char sense_key, asc, ascq;
+
+ sense_key = (qc->result_tf.auxiliary >> 16) & 0xff;
+ asc = (qc->result_tf.auxiliary >> 8) & 0xff;
+ ascq = qc->result_tf.auxiliary & 0xff;
+ ata_dev_dbg(dev, "NCQ Autosense %02x/%02x/%02x\n",
+ sense_key, asc, ascq);
+ ata_scsi_set_sense(qc->scsicmd, sense_key, asc, ascq);
+ ata_scsi_set_sense_information(qc->scsicmd, &qc->result_tf);
+ qc->flags |= ATA_QCFLAG_SENSE_VALID;
+ }
+
ehc->i.err_mask &= ~AC_ERR_DEV;
}
@@ -1801,6 +1886,27 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
return ATA_EH_RESET;
}
+ /*
+ * Sense data reporting does not work if the
+ * device fault bit is set.
+ */
+ if ((stat & ATA_SENSE) && !(stat & ATA_DF) &&
+ !(qc->flags & ATA_QCFLAG_SENSE_VALID)) {
+ if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) {
+ tmp = ata_eh_request_sense(qc, qc->scsicmd);
+ if (tmp)
+ qc->err_mask |= tmp;
+ else
+ ata_scsi_set_sense_information(qc->scsicmd, tf);
+ } else {
+ ata_dev_warn(qc->dev, "sense data available but port frozen\n");
+ }
+ }
+
+ /* Set by NCQ autosense or request sense above */
+ if (qc->flags & ATA_QCFLAG_SENSE_VALID)
+ return 0;
+
if (stat & (ATA_ERR | ATA_DF))
qc->err_mask |= AC_ERR_DEV;
else
@@ -2186,6 +2292,7 @@ static void ata_eh_link_autopsy(struct ata_link *link)
all_err_mask |= qc->err_mask;
if (qc->flags & ATA_QCFLAG_IO)
eflags |= ATA_EFLAG_IS_IO;
+ trace_ata_eh_link_autopsy_qc(qc);
}
/* enforce default EH actions */
@@ -2220,7 +2327,7 @@ static void ata_eh_link_autopsy(struct ata_link *link)
eflags |= ATA_EFLAG_DUBIOUS_XFER;
ehc->i.action |= ata_eh_speed_down(dev, eflags, all_err_mask);
}
-
+ trace_ata_eh_link_autopsy(dev, ehc->i.action, all_err_mask);
DPRINTK("EXIT\n");
}
@@ -2289,27 +2396,27 @@ const char *ata_get_cmd_descript(u8 command)
const char *text;
} cmd_descr[] = {
{ ATA_CMD_DEV_RESET, "DEVICE RESET" },
- { ATA_CMD_CHK_POWER, "CHECK POWER MODE" },
- { ATA_CMD_STANDBY, "STANDBY" },
- { ATA_CMD_IDLE, "IDLE" },
- { ATA_CMD_EDD, "EXECUTE DEVICE DIAGNOSTIC" },
- { ATA_CMD_DOWNLOAD_MICRO, "DOWNLOAD MICROCODE" },
+ { ATA_CMD_CHK_POWER, "CHECK POWER MODE" },
+ { ATA_CMD_STANDBY, "STANDBY" },
+ { ATA_CMD_IDLE, "IDLE" },
+ { ATA_CMD_EDD, "EXECUTE DEVICE DIAGNOSTIC" },
+ { ATA_CMD_DOWNLOAD_MICRO, "DOWNLOAD MICROCODE" },
{ ATA_CMD_DOWNLOAD_MICRO_DMA, "DOWNLOAD MICROCODE DMA" },
{ ATA_CMD_NOP, "NOP" },
- { ATA_CMD_FLUSH, "FLUSH CACHE" },
- { ATA_CMD_FLUSH_EXT, "FLUSH CACHE EXT" },
- { ATA_CMD_ID_ATA, "IDENTIFY DEVICE" },
- { ATA_CMD_ID_ATAPI, "IDENTIFY PACKET DEVICE" },
- { ATA_CMD_SERVICE, "SERVICE" },
- { ATA_CMD_READ, "READ DMA" },
- { ATA_CMD_READ_EXT, "READ DMA EXT" },
- { ATA_CMD_READ_QUEUED, "READ DMA QUEUED" },
- { ATA_CMD_READ_STREAM_EXT, "READ STREAM EXT" },
+ { ATA_CMD_FLUSH, "FLUSH CACHE" },
+ { ATA_CMD_FLUSH_EXT, "FLUSH CACHE EXT" },
+ { ATA_CMD_ID_ATA, "IDENTIFY DEVICE" },
+ { ATA_CMD_ID_ATAPI, "IDENTIFY PACKET DEVICE" },
+ { ATA_CMD_SERVICE, "SERVICE" },
+ { ATA_CMD_READ, "READ DMA" },
+ { ATA_CMD_READ_EXT, "READ DMA EXT" },
+ { ATA_CMD_READ_QUEUED, "READ DMA QUEUED" },
+ { ATA_CMD_READ_STREAM_EXT, "READ STREAM EXT" },
{ ATA_CMD_READ_STREAM_DMA_EXT, "READ STREAM DMA EXT" },
- { ATA_CMD_WRITE, "WRITE DMA" },
- { ATA_CMD_WRITE_EXT, "WRITE DMA EXT" },
- { ATA_CMD_WRITE_QUEUED, "WRITE DMA QUEUED EXT" },
- { ATA_CMD_WRITE_STREAM_EXT, "WRITE STREAM EXT" },
+ { ATA_CMD_WRITE, "WRITE DMA" },
+ { ATA_CMD_WRITE_EXT, "WRITE DMA EXT" },
+ { ATA_CMD_WRITE_QUEUED, "WRITE DMA QUEUED EXT" },
+ { ATA_CMD_WRITE_STREAM_EXT, "WRITE STREAM EXT" },
{ ATA_CMD_WRITE_STREAM_DMA_EXT, "WRITE STREAM DMA EXT" },
{ ATA_CMD_WRITE_FUA_EXT, "WRITE DMA FUA EXT" },
{ ATA_CMD_WRITE_QUEUED_FUA_EXT, "WRITE DMA QUEUED FUA EXT" },
@@ -2325,7 +2432,7 @@ const char *ata_get_cmd_descript(u8 command)
{ ATA_CMD_READ_MULTI_EXT, "READ MULTIPLE EXT" },
{ ATA_CMD_WRITE_MULTI, "WRITE MULTIPLE" },
{ ATA_CMD_WRITE_MULTI_EXT, "WRITE MULTIPLE EXT" },
- { ATA_CMD_WRITE_MULTI_FUA_EXT, "WRITE MULTIPLE FUA EXT" },
+ { ATA_CMD_WRITE_MULTI_FUA_EXT, "WRITE MULTIPLE FUA EXT" },
{ ATA_CMD_SET_FEATURES, "SET FEATURES" },
{ ATA_CMD_SET_MULTI, "SET MULTIPLE MODE" },
{ ATA_CMD_VERIFY, "READ VERIFY SECTOR(S)" },
@@ -2342,12 +2449,12 @@ const char *ata_get_cmd_descript(u8 command)
{ ATA_CMD_READ_LOG_EXT, "READ LOG EXT" },
{ ATA_CMD_WRITE_LOG_EXT, "WRITE LOG EXT" },
{ ATA_CMD_READ_LOG_DMA_EXT, "READ LOG DMA EXT" },
- { ATA_CMD_WRITE_LOG_DMA_EXT, "WRITE LOG DMA EXT" },
+ { ATA_CMD_WRITE_LOG_DMA_EXT, "WRITE LOG DMA EXT" },
{ ATA_CMD_TRUSTED_NONDATA, "TRUSTED NON-DATA" },
{ ATA_CMD_TRUSTED_RCV, "TRUSTED RECEIVE" },
- { ATA_CMD_TRUSTED_RCV_DMA, "TRUSTED RECEIVE DMA" },
+ { ATA_CMD_TRUSTED_RCV_DMA, "TRUSTED RECEIVE DMA" },
{ ATA_CMD_TRUSTED_SND, "TRUSTED SEND" },
- { ATA_CMD_TRUSTED_SND_DMA, "TRUSTED SEND DMA" },
+ { ATA_CMD_TRUSTED_SND_DMA, "TRUSTED SEND DMA" },
{ ATA_CMD_PMP_READ, "READ BUFFER" },
{ ATA_CMD_PMP_READ_DMA, "READ BUFFER DMA" },
{ ATA_CMD_PMP_WRITE, "WRITE BUFFER" },
@@ -2364,12 +2471,12 @@ const char *ata_get_cmd_descript(u8 command)
{ ATA_CMD_MEDIA_LOCK, "DOOR LOCK" },
{ ATA_CMD_MEDIA_UNLOCK, "DOOR UNLOCK" },
{ ATA_CMD_DSM, "DATA SET MANAGEMENT" },
- { ATA_CMD_CHK_MED_CRD_TYP, "CHECK MEDIA CARD TYPE" },
- { ATA_CMD_CFA_REQ_EXT_ERR, "CFA REQUEST EXTENDED ERROR" },
+ { ATA_CMD_CHK_MED_CRD_TYP, "CHECK MEDIA CARD TYPE" },
+ { ATA_CMD_CFA_REQ_EXT_ERR, "CFA REQUEST EXTENDED ERROR" },
{ ATA_CMD_CFA_WRITE_NE, "CFA WRITE SECTORS WITHOUT ERASE" },
{ ATA_CMD_CFA_TRANS_SECT, "CFA TRANSLATE SECTOR" },
{ ATA_CMD_CFA_ERASE, "CFA ERASE SECTORS" },
- { ATA_CMD_CFA_WRITE_MULT_NE, "CFA WRITE MULTIPLE WITHOUT ERASE" },
+ { ATA_CMD_CFA_WRITE_MULT_NE, "CFA WRITE MULTIPLE WITHOUT ERASE" },
{ ATA_CMD_REQ_SENSE_DATA, "REQUEST SENSE DATA EXT" },
{ ATA_CMD_SANITIZE_DEVICE, "SANITIZE DEVICE" },
{ ATA_CMD_READ_LONG, "READ LONG (with retries)" },
@@ -2543,14 +2650,15 @@ static void ata_eh_link_report(struct ata_link *link)
#ifdef CONFIG_ATA_VERBOSE_ERROR
if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ |
- ATA_ERR)) {
+ ATA_SENSE | ATA_ERR)) {
if (res->command & ATA_BUSY)
ata_dev_err(qc->dev, "status: { Busy }\n");
else
- ata_dev_err(qc->dev, "status: { %s%s%s%s}\n",
+ ata_dev_err(qc->dev, "status: { %s%s%s%s%s}\n",
res->command & ATA_DRDY ? "DRDY " : "",
res->command & ATA_DF ? "DF " : "",
res->command & ATA_DRQ ? "DRQ " : "",
+ res->command & ATA_SENSE ? "SENSE " : "",
res->command & ATA_ERR ? "ERR " : "");
}
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index b061ba2c31d8..3131adcc1f87 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -270,13 +270,28 @@ DEVICE_ATTR(unload_heads, S_IRUGO | S_IWUSR,
ata_scsi_park_show, ata_scsi_park_store);
EXPORT_SYMBOL_GPL(dev_attr_unload_heads);
-static void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
+void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
{
+ if (!cmd)
+ return;
+
cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
scsi_build_sense_buffer(0, cmd->sense_buffer, sk, asc, ascq);
}
+void ata_scsi_set_sense_information(struct scsi_cmnd *cmd,
+ const struct ata_taskfile *tf)
+{
+ u64 information;
+
+ if (!cmd)
+ return;
+
+ information = ata_tf_read_block(tf, NULL);
+ scsi_set_sense_information(cmd->sense_buffer, information);
+}
+
static ssize_t
ata_scsi_em_message_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
@@ -799,26 +814,27 @@ static void ata_dump_status(unsigned id, struct ata_taskfile *tf)
if (stat & ATA_BUSY) {
printk("Busy }\n"); /* Data is not valid in this case */
} else {
- if (stat & 0x40) printk("DriveReady ");
- if (stat & 0x20) printk("DeviceFault ");
- if (stat & 0x10) printk("SeekComplete ");
- if (stat & 0x08) printk("DataRequest ");
- if (stat & 0x04) printk("CorrectedError ");
- if (stat & 0x02) printk("Index ");
- if (stat & 0x01) printk("Error ");
+ if (stat & ATA_DRDY) printk("DriveReady ");
+ if (stat & ATA_DF) printk("DeviceFault ");
+ if (stat & ATA_DSC) printk("SeekComplete ");
+ if (stat & ATA_DRQ) printk("DataRequest ");
+ if (stat & ATA_CORR) printk("CorrectedError ");
+ if (stat & ATA_SENSE) printk("Sense ");
+ if (stat & ATA_ERR) printk("Error ");
printk("}\n");
if (err) {
printk(KERN_WARNING "ata%u: error=0x%02x { ", id, err);
- if (err & 0x04) printk("DriveStatusError ");
- if (err & 0x80) {
- if (err & 0x04) printk("BadCRC ");
+ if (err & ATA_ABORTED) printk("DriveStatusError ");
+ if (err & ATA_ICRC) {
+ if (err & ATA_ABORTED)
+ printk("BadCRC ");
else printk("Sector ");
}
- if (err & 0x40) printk("UncorrectableError ");
- if (err & 0x10) printk("SectorIdNotFound ");
- if (err & 0x02) printk("TrackZeroNotFound ");
- if (err & 0x01) printk("AddrMarkNotFound ");
+ if (err & ATA_UNC) printk("UncorrectableError ");
+ if (err & ATA_IDNF) printk("SectorIdNotFound ");
+ if (err & ATA_TRK0NF) printk("TrackZeroNotFound ");
+ if (err & ATA_AMNF) printk("AddrMarkNotFound ");
printk("}\n");
}
}
@@ -849,40 +865,59 @@ static void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk,
/* Based on the 3ware driver translation table */
static const unsigned char sense_table[][4] = {
/* BBD|ECC|ID|MAR */
- {0xd1, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command
+ {0xd1, ABORTED_COMMAND, 0x00, 0x00},
+ // Device busy Aborted command
/* BBD|ECC|ID */
- {0xd0, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command
+ {0xd0, ABORTED_COMMAND, 0x00, 0x00},
+ // Device busy Aborted command
/* ECC|MC|MARK */
- {0x61, HARDWARE_ERROR, 0x00, 0x00}, // Device fault Hardware error
+ {0x61, HARDWARE_ERROR, 0x00, 0x00},
+ // Device fault Hardware error
/* ICRC|ABRT */ /* NB: ICRC & !ABRT is BBD */
- {0x84, ABORTED_COMMAND, 0x47, 0x00}, // Data CRC error SCSI parity error
+ {0x84, ABORTED_COMMAND, 0x47, 0x00},
+ // Data CRC error SCSI parity error
/* MC|ID|ABRT|TRK0|MARK */
- {0x37, NOT_READY, 0x04, 0x00}, // Unit offline Not ready
+ {0x37, NOT_READY, 0x04, 0x00},
+ // Unit offline Not ready
/* MCR|MARK */
- {0x09, NOT_READY, 0x04, 0x00}, // Unrecovered disk error Not ready
+ {0x09, NOT_READY, 0x04, 0x00},
+ // Unrecovered disk error Not ready
/* Bad address mark */
- {0x01, MEDIUM_ERROR, 0x13, 0x00}, // Address mark not found Address mark not found for data field
- /* TRK0 */
- {0x02, HARDWARE_ERROR, 0x00, 0x00}, // Track 0 not found Hardware error
+ {0x01, MEDIUM_ERROR, 0x13, 0x00},
+ // Address mark not found for data field
+ /* TRK0 - Track 0 not found */
+ {0x02, HARDWARE_ERROR, 0x00, 0x00},
+ // Hardware error
/* Abort: 0x04 is not translated here, see below */
/* Media change request */
- {0x08, NOT_READY, 0x04, 0x00}, // Media change request FIXME: faking offline
- /* SRV/IDNF */
- {0x10, ILLEGAL_REQUEST, 0x21, 0x00}, // ID not found Logical address out of range
- /* MC */
- {0x20, UNIT_ATTENTION, 0x28, 0x00}, // Media Changed Not ready to ready change, medium may have changed
- /* ECC */
- {0x40, MEDIUM_ERROR, 0x11, 0x04}, // Uncorrectable ECC error Unrecovered read error
+ {0x08, NOT_READY, 0x04, 0x00},
+ // FIXME: faking offline
+ /* SRV/IDNF - ID not found */
+ {0x10, ILLEGAL_REQUEST, 0x21, 0x00},
+ // Logical address out of range
+ /* MC - Media Changed */
+ {0x20, UNIT_ATTENTION, 0x28, 0x00},
+ // Not ready to ready change, medium may have changed
+ /* ECC - Uncorrectable ECC error */
+ {0x40, MEDIUM_ERROR, 0x11, 0x04},
+ // Unrecovered read error
/* BBD - block marked bad */
- {0x80, MEDIUM_ERROR, 0x11, 0x04}, // Block marked bad Medium error, unrecovered read error
+ {0x80, MEDIUM_ERROR, 0x11, 0x04},
+ // Block marked bad Medium error, unrecovered read error
{0xFF, 0xFF, 0xFF, 0xFF}, // END mark
};
static const unsigned char stat_table[][4] = {
/* Must be first because BUSY means no other bits valid */
- {0x80, ABORTED_COMMAND, 0x47, 0x00}, // Busy, fake parity for now
- {0x20, HARDWARE_ERROR, 0x44, 0x00}, // Device fault, internal target failure
- {0x08, ABORTED_COMMAND, 0x47, 0x00}, // Timed out in xfer, fake parity for now
- {0x04, RECOVERED_ERROR, 0x11, 0x00}, // Recovered ECC error Medium error, recovered
+ {0x80, ABORTED_COMMAND, 0x47, 0x00},
+ // Busy, fake parity for now
+ {0x40, ILLEGAL_REQUEST, 0x21, 0x04},
+ // Device ready, unaligned write command
+ {0x20, HARDWARE_ERROR, 0x44, 0x00},
+ // Device fault, internal target failure
+ {0x08, ABORTED_COMMAND, 0x47, 0x00},
+ // Timed out in xfer, fake parity for now
+ {0x04, RECOVERED_ERROR, 0x11, 0x00},
+ // Recovered ECC error Medium error, recovered
{0xFF, 0xFF, 0xFF, 0xFF}, // END mark
};
@@ -1757,7 +1792,9 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
((cdb[2] & 0x20) || need_sense)) {
ata_gen_passthru_sense(qc);
} else {
- if (!need_sense) {
+ if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
+ cmd->result = SAM_STAT_CHECK_CONDITION;
+ } else if (!need_sense) {
cmd->result = SAM_STAT_GOOD;
} else {
/* TODO: decide which descriptor format to use
@@ -4240,10 +4277,7 @@ int ata_sas_allocate_tag(struct ata_port *ap)
unsigned int i, tag;
for (i = 0, tag = ap->sas_last_tag + 1; i < max_queue; i++, tag++) {
- if (ap->flags & ATA_FLAG_LOWTAG)
- tag = 1;
- else
- tag = tag < max_queue ? tag : 0;
+ tag = tag < max_queue ? tag : 0;
/* the last tag is reserved for internal command. */
if (tag == ATA_TAG_INTERNAL)
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 2e86e3b85266..cdf6215a9a22 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -3220,11 +3220,11 @@ void ata_pci_bmdma_init(struct ata_host *host)
* ->sff_irq_clear method. Try to initialize bmdma_addr
* regardless of dma masks.
*/
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
if (rc)
ata_bmdma_nodma(host, "failed to set dma mask");
if (!rc) {
- rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
if (rc)
ata_bmdma_nodma(host,
"failed to set consistent dma mask");
diff --git a/drivers/ata/libata-trace.c b/drivers/ata/libata-trace.c
new file mode 100644
index 000000000000..fd30b8c10cf5
--- /dev/null
+++ b/drivers/ata/libata-trace.c
@@ -0,0 +1,151 @@
+/*
+ * libata-trace.c - trace functions for libata
+ *
+ * Copyright 2015 Hannes Reinecke
+ * Copyright 2015 SUSE Linux GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/trace_seq.h>
+#include <trace/events/libata.h>
+
+const char *
+libata_trace_parse_status(struct trace_seq *p, unsigned char status)
+{
+ const char *ret = trace_seq_buffer_ptr(p);
+
+ trace_seq_printf(p, "{ ");
+ if (status & ATA_BUSY)
+ trace_seq_printf(p, "BUSY ");
+ if (status & ATA_DRDY)
+ trace_seq_printf(p, "DRDY ");
+ if (status & ATA_DF)
+ trace_seq_printf(p, "DF ");
+ if (status & ATA_DSC)
+ trace_seq_printf(p, "DSC ");
+ if (status & ATA_DRQ)
+ trace_seq_printf(p, "DRQ ");
+ if (status & ATA_CORR)
+ trace_seq_printf(p, "CORR ");
+ if (status & ATA_SENSE)
+ trace_seq_printf(p, "SENSE ");
+ if (status & ATA_ERR)
+ trace_seq_printf(p, "ERR ");
+ trace_seq_putc(p, '}');
+ trace_seq_putc(p, 0);
+
+ return ret;
+}
+
+const char *
+libata_trace_parse_eh_action(struct trace_seq *p, unsigned int eh_action)
+{
+ const char *ret = trace_seq_buffer_ptr(p);
+
+ trace_seq_printf(p, "%x", eh_action);
+ if (eh_action) {
+ trace_seq_printf(p, "{ ");
+ if (eh_action & ATA_EH_REVALIDATE)
+ trace_seq_printf(p, "REVALIDATE ");
+ if (eh_action & (ATA_EH_SOFTRESET | ATA_EH_HARDRESET))
+ trace_seq_printf(p, "RESET ");
+ else if (eh_action & ATA_EH_SOFTRESET)
+ trace_seq_printf(p, "SOFTRESET ");
+ else if (eh_action & ATA_EH_HARDRESET)
+ trace_seq_printf(p, "HARDRESET ");
+ if (eh_action & ATA_EH_ENABLE_LINK)
+ trace_seq_printf(p, "ENABLE_LINK ");
+ if (eh_action & ATA_EH_PARK)
+ trace_seq_printf(p, "PARK ");
+ trace_seq_putc(p, '}');
+ }
+ trace_seq_putc(p, 0);
+
+ return ret;
+}
+
+const char *
+libata_trace_parse_eh_err_mask(struct trace_seq *p, unsigned int eh_err_mask)
+{
+ const char *ret = trace_seq_buffer_ptr(p);
+
+ trace_seq_printf(p, "%x", eh_err_mask);
+ if (eh_err_mask) {
+ trace_seq_printf(p, "{ ");
+ if (eh_err_mask & AC_ERR_DEV)
+ trace_seq_printf(p, "DEV ");
+ if (eh_err_mask & AC_ERR_HSM)
+ trace_seq_printf(p, "HSM ");
+ if (eh_err_mask & AC_ERR_TIMEOUT)
+ trace_seq_printf(p, "TIMEOUT ");
+ if (eh_err_mask & AC_ERR_MEDIA)
+ trace_seq_printf(p, "MEDIA ");
+ if (eh_err_mask & AC_ERR_ATA_BUS)
+ trace_seq_printf(p, "ATA_BUS ");
+ if (eh_err_mask & AC_ERR_HOST_BUS)
+ trace_seq_printf(p, "HOST_BUS ");
+ if (eh_err_mask & AC_ERR_SYSTEM)
+ trace_seq_printf(p, "SYSTEM ");
+ if (eh_err_mask & AC_ERR_INVALID)
+ trace_seq_printf(p, "INVALID ");
+ if (eh_err_mask & AC_ERR_OTHER)
+ trace_seq_printf(p, "OTHER ");
+ if (eh_err_mask & AC_ERR_NODEV_HINT)
+ trace_seq_printf(p, "NODEV_HINT ");
+ if (eh_err_mask & AC_ERR_NCQ)
+ trace_seq_printf(p, "NCQ ");
+ trace_seq_putc(p, '}');
+ }
+ trace_seq_putc(p, 0);
+
+ return ret;
+}
+
+const char *
+libata_trace_parse_qc_flags(struct trace_seq *p, unsigned int qc_flags)
+{
+ const char *ret = trace_seq_buffer_ptr(p);
+
+ trace_seq_printf(p, "%x", qc_flags);
+ if (qc_flags) {
+ trace_seq_printf(p, "{ ");
+ if (qc_flags & ATA_QCFLAG_ACTIVE)
+ trace_seq_printf(p, "ACTIVE ");
+ if (qc_flags & ATA_QCFLAG_DMAMAP)
+ trace_seq_printf(p, "DMAMAP ");
+ if (qc_flags & ATA_QCFLAG_IO)
+ trace_seq_printf(p, "IO ");
+ if (qc_flags & ATA_QCFLAG_RESULT_TF)
+ trace_seq_printf(p, "RESULT_TF ");
+ if (qc_flags & ATA_QCFLAG_CLEAR_EXCL)
+ trace_seq_printf(p, "CLEAR_EXCL ");
+ if (qc_flags & ATA_QCFLAG_QUIET)
+ trace_seq_printf(p, "QUIET ");
+ if (qc_flags & ATA_QCFLAG_RETRY)
+ trace_seq_printf(p, "RETRY ");
+ if (qc_flags & ATA_QCFLAG_FAILED)
+ trace_seq_printf(p, "FAILED ");
+ if (qc_flags & ATA_QCFLAG_SENSE_VALID)
+ trace_seq_printf(p, "SENSE_VALID ");
+ if (qc_flags & ATA_QCFLAG_EH_SCHEDULED)
+ trace_seq_printf(p, "EH_SCHEDULED ");
+ trace_seq_putc(p, '}');
+ }
+ trace_seq_putc(p, 0);
+
+ return ret;
+}
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index f840ca18a7c0..a998a175f9f1 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -67,7 +67,8 @@ extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag);
extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
u64 block, u32 n_block, unsigned int tf_flags,
unsigned int tag);
-extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev);
+extern u64 ata_tf_read_block(const struct ata_taskfile *tf,
+ struct ata_device *dev);
extern unsigned ata_exec_internal(struct ata_device *dev,
struct ata_taskfile *tf, const u8 *cdb,
int dma_dir, void *buf, unsigned int buflen,
@@ -137,6 +138,9 @@ extern int ata_scsi_add_hosts(struct ata_host *host,
struct scsi_host_template *sht);
extern void ata_scsi_scan_host(struct ata_port *ap, int sync);
extern int ata_scsi_offline_dev(struct ata_device *dev);
+extern void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq);
+extern void ata_scsi_set_sense_information(struct scsi_cmnd *cmd,
+ const struct ata_taskfile *tf);
extern void ata_scsi_media_change_notify(struct ata_device *dev);
extern void ata_scsi_hotplug(struct work_struct *work);
extern void ata_schedule_scsi_eh(struct Scsi_Host *shost);
diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c
index a705cfca90f7..3ea50dc5ea47 100644
--- a/drivers/ata/pata_atp867x.c
+++ b/drivers/ata/pata_atp867x.c
@@ -475,11 +475,11 @@ static int atp867x_ata_pci_sff_init_host(struct ata_host *host)
atp867x_fixup(host);
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
- rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
return rc;
}
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index d65cb9d2fa8c..4cb24070cc2d 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -164,11 +164,11 @@ static int cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
return -ENODEV;
}
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
printk(KERN_ERR DRV_NAME ": unable to configure DMA mask.\n");
return -ENODEV;
}
- if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ if (dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) {
printk(KERN_ERR DRV_NAME ": unable to configure consistent DMA mask.\n");
return -ENODEV;
}
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index d019cdd5bc9f..b2fc023783b1 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -221,10 +221,10 @@ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
if (rc)
return rc;
host->iomap = pcim_iomap_table(pdev);
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
- rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index efb272da8567..633aa2934a18 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -122,10 +122,10 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
return rc;
host->iomap = pcim_iomap_table(dev);
- rc = pci_set_dma_mask(dev, ATA_DMA_MASK);
+ rc = dma_set_mask(&dev->dev, ATA_DMA_MASK);
if (rc)
return rc;
- rc = pci_set_consistent_dma_mask(dev, ATA_DMA_MASK);
+ rc = dma_set_coherent_mask(&dev->dev, ATA_DMA_MASK);
if (rc)
return rc;
pci_set_master(dev);
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index dca8251b1aea..d9ef9e276225 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -730,11 +730,11 @@ static int pdc2027x_init_one(struct pci_dev *pdev,
return rc;
host->iomap = pcim_iomap_table(pdev);
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
- rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 7f4cb76ed9fa..5cd60d6388ec 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -1029,10 +1029,10 @@ static int scc_host_init(struct ata_host *host)
if (rc)
return rc;
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
- rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index f597edccedec..c14071be4f55 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -374,10 +374,10 @@ static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
host->iomap = pcim_iomap_table(pdev);
/* Setup DMA masks */
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
- rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
pci_set_master(pdev);
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index f10631beffa8..64d682c6ee57 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -593,12 +593,12 @@ static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
{
int rc;
- rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
}
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev, "32-bit consistent DMA enable failed\n");
return rc;
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index fdb0f2879ea7..902034991517 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -36,11 +36,16 @@
#include <linux/platform_device.h>
#include <linux/libata.h>
#include <linux/slab.h>
+
#include "libata.h"
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
+/* Supported DMA engine drivers */
+#include <linux/platform_data/dma-dw.h>
+#include <linux/dma/dw.h>
+
/* These two are defined in "libata.h" */
#undef DRV_NAME
#undef DRV_VERSION
@@ -60,153 +65,9 @@
#define NO_IRQ 0
#endif
-/* SATA DMA driver Globals */
-#define DMA_NUM_CHANS 1
-#define DMA_NUM_CHAN_REGS 8
-
-/* SATA DMA Register definitions */
#define AHB_DMA_BRST_DFLT 64 /* 16 data items burst length*/
-struct dmareg {
- u32 low; /* Low bits 0-31 */
- u32 high; /* High bits 32-63 */
-};
-
-/* DMA Per Channel registers */
-struct dma_chan_regs {
- struct dmareg sar; /* Source Address */
- struct dmareg dar; /* Destination address */
- struct dmareg llp; /* Linked List Pointer */
- struct dmareg ctl; /* Control */
- struct dmareg sstat; /* Source Status not implemented in core */
- struct dmareg dstat; /* Destination Status not implemented in core*/
- struct dmareg sstatar; /* Source Status Address not impl in core */
- struct dmareg dstatar; /* Destination Status Address not implemente */
- struct dmareg cfg; /* Config */
- struct dmareg sgr; /* Source Gather */
- struct dmareg dsr; /* Destination Scatter */
-};
-
-/* Generic Interrupt Registers */
-struct dma_interrupt_regs {
- struct dmareg tfr; /* Transfer Interrupt */
- struct dmareg block; /* Block Interrupt */
- struct dmareg srctran; /* Source Transfer Interrupt */
- struct dmareg dsttran; /* Dest Transfer Interrupt */
- struct dmareg error; /* Error */
-};
-
-struct ahb_dma_regs {
- struct dma_chan_regs chan_regs[DMA_NUM_CHAN_REGS];
- struct dma_interrupt_regs interrupt_raw; /* Raw Interrupt */
- struct dma_interrupt_regs interrupt_status; /* Interrupt Status */
- struct dma_interrupt_regs interrupt_mask; /* Interrupt Mask */
- struct dma_interrupt_regs interrupt_clear; /* Interrupt Clear */
- struct dmareg statusInt; /* Interrupt combined*/
- struct dmareg rq_srcreg; /* Src Trans Req */
- struct dmareg rq_dstreg; /* Dst Trans Req */
- struct dmareg rq_sgl_srcreg; /* Sngl Src Trans Req*/
- struct dmareg rq_sgl_dstreg; /* Sngl Dst Trans Req*/
- struct dmareg rq_lst_srcreg; /* Last Src Trans Req*/
- struct dmareg rq_lst_dstreg; /* Last Dst Trans Req*/
- struct dmareg dma_cfg; /* DMA Config */
- struct dmareg dma_chan_en; /* DMA Channel Enable*/
- struct dmareg dma_id; /* DMA ID */
- struct dmareg dma_test; /* DMA Test */
- struct dmareg res1; /* reserved */
- struct dmareg res2; /* reserved */
- /*
- * DMA Comp Params
- * Param 6 = dma_param[0], Param 5 = dma_param[1],
- * Param 4 = dma_param[2] ...
- */
- struct dmareg dma_params[6];
-};
-
-/* Data structure for linked list item */
-struct lli {
- u32 sar; /* Source Address */
- u32 dar; /* Destination address */
- u32 llp; /* Linked List Pointer */
- struct dmareg ctl; /* Control */
- struct dmareg dstat; /* Destination Status */
-};
-
-enum {
- SATA_DWC_DMAC_LLI_SZ = (sizeof(struct lli)),
- SATA_DWC_DMAC_LLI_NUM = 256,
- SATA_DWC_DMAC_LLI_TBL_SZ = (SATA_DWC_DMAC_LLI_SZ * \
- SATA_DWC_DMAC_LLI_NUM),
- SATA_DWC_DMAC_TWIDTH_BYTES = 4,
- SATA_DWC_DMAC_CTRL_TSIZE_MAX = (0x00000800 * \
- SATA_DWC_DMAC_TWIDTH_BYTES),
-};
-
-/* DMA Register Operation Bits */
-enum {
- DMA_EN = 0x00000001, /* Enable AHB DMA */
- DMA_CTL_LLP_SRCEN = 0x10000000, /* Blk chain enable Src */
- DMA_CTL_LLP_DSTEN = 0x08000000, /* Blk chain enable Dst */
-};
-
-#define DMA_CTL_BLK_TS(size) ((size) & 0x000000FFF) /* Blk Transfer size */
-#define DMA_CHANNEL(ch) (0x00000001 << (ch)) /* Select channel */
- /* Enable channel */
-#define DMA_ENABLE_CHAN(ch) ((0x00000001 << (ch)) | \
- ((0x000000001 << (ch)) << 8))
- /* Disable channel */
-#define DMA_DISABLE_CHAN(ch) (0x00000000 | ((0x000000001 << (ch)) << 8))
- /* Transfer Type & Flow Controller */
-#define DMA_CTL_TTFC(type) (((type) & 0x7) << 20)
-#define DMA_CTL_SMS(num) (((num) & 0x3) << 25) /* Src Master Select */
-#define DMA_CTL_DMS(num) (((num) & 0x3) << 23)/* Dst Master Select */
- /* Src Burst Transaction Length */
-#define DMA_CTL_SRC_MSIZE(size) (((size) & 0x7) << 14)
- /* Dst Burst Transaction Length */
-#define DMA_CTL_DST_MSIZE(size) (((size) & 0x7) << 11)
- /* Source Transfer Width */
-#define DMA_CTL_SRC_TRWID(size) (((size) & 0x7) << 4)
- /* Destination Transfer Width */
-#define DMA_CTL_DST_TRWID(size) (((size) & 0x7) << 1)
-
-/* Assign HW handshaking interface (x) to destination / source peripheral */
-#define DMA_CFG_HW_HS_DEST(int_num) (((int_num) & 0xF) << 11)
-#define DMA_CFG_HW_HS_SRC(int_num) (((int_num) & 0xF) << 7)
-#define DMA_CFG_HW_CH_PRIOR(int_num) (((int_num) & 0xF) << 5)
-#define DMA_LLP_LMS(addr, master) (((addr) & 0xfffffffc) | (master))
-
-/*
- * This define is used to set block chaining disabled in the control low
- * register. It is already in little endian format so it can be &'d dirctly.
- * It is essentially: cpu_to_le32(~(DMA_CTL_LLP_SRCEN | DMA_CTL_LLP_DSTEN))
- */
enum {
- DMA_CTL_LLP_DISABLE_LE32 = 0xffffffe7,
- DMA_CTL_TTFC_P2M_DMAC = 0x00000002, /* Per to mem, DMAC cntr */
- DMA_CTL_TTFC_M2P_PER = 0x00000003, /* Mem to per, peripheral cntr */
- DMA_CTL_SINC_INC = 0x00000000, /* Source Address Increment */
- DMA_CTL_SINC_DEC = 0x00000200,
- DMA_CTL_SINC_NOCHANGE = 0x00000400,
- DMA_CTL_DINC_INC = 0x00000000, /* Destination Address Increment */
- DMA_CTL_DINC_DEC = 0x00000080,
- DMA_CTL_DINC_NOCHANGE = 0x00000100,
- DMA_CTL_INT_EN = 0x00000001, /* Interrupt Enable */
-
-/* Channel Configuration Register high bits */
- DMA_CFG_FCMOD_REQ = 0x00000001, /* Flow Control - request based */
- DMA_CFG_PROTCTL = (0x00000003 << 2),/* Protection Control */
-
-/* Channel Configuration Register low bits */
- DMA_CFG_RELD_DST = 0x80000000, /* Reload Dest / Src Addr */
- DMA_CFG_RELD_SRC = 0x40000000,
- DMA_CFG_HS_SELSRC = 0x00000800, /* Software handshake Src/ Dest */
- DMA_CFG_HS_SELDST = 0x00000400,
- DMA_CFG_FIFOEMPTY = (0x00000001 << 9), /* FIFO Empty bit */
-
-/* Channel Linked List Pointer Register */
- DMA_LLP_AHBMASTER1 = 0, /* List Master Select */
- DMA_LLP_AHBMASTER2 = 1,
-
SATA_DWC_MAX_PORTS = 1,
SATA_DWC_SCR_OFFSET = 0x24,
@@ -287,7 +148,7 @@ struct sata_dwc_device {
struct ata_host *host;
u8 __iomem *reg_base;
struct sata_dwc_regs *sata_dwc_regs; /* DW Synopsys SATA specific */
- int irq_dma;
+ struct dw_dma_chip *dma;
};
#define SATA_DWC_QCMD_MAX 32
@@ -295,10 +156,13 @@ struct sata_dwc_device {
struct sata_dwc_device_port {
struct sata_dwc_device *hsdev;
int cmd_issued[SATA_DWC_QCMD_MAX];
- struct lli *llit[SATA_DWC_QCMD_MAX]; /* DMA LLI table */
- dma_addr_t llit_dma[SATA_DWC_QCMD_MAX];
- u32 dma_chan[SATA_DWC_QCMD_MAX];
int dma_pending[SATA_DWC_QCMD_MAX];
+
+ /* DMA info */
+ struct dw_dma_slave *dws;
+ struct dma_chan *chan;
+ struct dma_async_tx_descriptor *desc[SATA_DWC_QCMD_MAX];
+ u32 dma_interrupt_count;
};
/*
@@ -330,14 +194,17 @@ struct sata_dwc_host_priv {
void __iomem *scr_addr_sstatus;
u32 sata_dwc_sactive_issued ;
u32 sata_dwc_sactive_queued ;
- u32 dma_interrupt_count;
- struct ahb_dma_regs *sata_dma_regs;
- struct device *dwc_dev;
- int dma_channel;
};
static struct sata_dwc_host_priv host_pvt;
+static struct dw_dma_slave sata_dwc_dma_dws = {
+ .src_id = 0,
+ .dst_id = 0,
+ .src_master = 0,
+ .dst_master = 1,
+};
+
/*
* Prototypes
*/
@@ -347,12 +214,6 @@ static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc,
static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status);
static void sata_dwc_port_stop(struct ata_port *ap);
static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag);
-static int dma_dwc_init(struct sata_dwc_device *hsdev, int irq);
-static void dma_dwc_exit(struct sata_dwc_device *hsdev);
-static int dma_dwc_xfer_setup(struct scatterlist *sg, int num_elems,
- struct lli *lli, dma_addr_t dma_lli,
- void __iomem *addr, int dir);
-static void dma_dwc_xfer_start(int dma_ch);
static const char *get_prot_descript(u8 protocol)
{
@@ -390,90 +251,23 @@ static const char *get_dma_dir_descript(int dma_dir)
}
}
-static void sata_dwc_tf_dump(struct ata_taskfile *tf)
+static void sata_dwc_tf_dump(struct ata_port *ap, struct ata_taskfile *tf)
{
- dev_vdbg(host_pvt.dwc_dev, "taskfile cmd: 0x%02x protocol: %s flags:"
- "0x%lx device: %x\n", tf->command,
- get_prot_descript(tf->protocol), tf->flags, tf->device);
- dev_vdbg(host_pvt.dwc_dev, "feature: 0x%02x nsect: 0x%x lbal: 0x%x "
- "lbam: 0x%x lbah: 0x%x\n", tf->feature, tf->nsect, tf->lbal,
- tf->lbam, tf->lbah);
- dev_vdbg(host_pvt.dwc_dev, "hob_feature: 0x%02x hob_nsect: 0x%x "
- "hob_lbal: 0x%x hob_lbam: 0x%x hob_lbah: 0x%x\n",
+ dev_vdbg(ap->dev,
+ "taskfile cmd: 0x%02x protocol: %s flags: 0x%lx device: %x\n",
+ tf->command, get_prot_descript(tf->protocol), tf->flags,
+ tf->device);
+ dev_vdbg(ap->dev,
+ "feature: 0x%02x nsect: 0x%x lbal: 0x%x lbam: 0x%x lbah: 0x%x\n",
+ tf->feature, tf->nsect, tf->lbal, tf->lbam, tf->lbah);
+ dev_vdbg(ap->dev,
+ "hob_feature: 0x%02x hob_nsect: 0x%x hob_lbal: 0x%x hob_lbam: 0x%x hob_lbah: 0x%x\n",
tf->hob_feature, tf->hob_nsect, tf->hob_lbal, tf->hob_lbam,
tf->hob_lbah);
}
-/*
- * Function: get_burst_length_encode
- * arguments: datalength: length in bytes of data
- * returns value to be programmed in register corresponding to data length
- * This value is effectively the log(base 2) of the length
- */
-static int get_burst_length_encode(int datalength)
-{
- int items = datalength >> 2; /* div by 4 to get lword count */
-
- if (items >= 64)
- return 5;
-
- if (items >= 32)
- return 4;
-
- if (items >= 16)
- return 3;
-
- if (items >= 8)
- return 2;
-
- if (items >= 4)
- return 1;
-
- return 0;
-}
-
-static void clear_chan_interrupts(int c)
+static void dma_dwc_xfer_done(void *hsdev_instance)
{
- out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.tfr.low),
- DMA_CHANNEL(c));
- out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.block.low),
- DMA_CHANNEL(c));
- out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.srctran.low),
- DMA_CHANNEL(c));
- out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.dsttran.low),
- DMA_CHANNEL(c));
- out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.error.low),
- DMA_CHANNEL(c));
-}
-
-/*
- * Function: dma_request_channel
- * arguments: None
- * returns channel number if available else -1
- * This function assigns the next available DMA channel from the list to the
- * requester
- */
-static int dma_request_channel(void)
-{
- /* Check if the channel is not currently in use */
- if (!(in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)) &
- DMA_CHANNEL(host_pvt.dma_channel)))
- return host_pvt.dma_channel;
- dev_err(host_pvt.dwc_dev, "%s Channel %d is currently in use\n",
- __func__, host_pvt.dma_channel);
- return -1;
-}
-
-/*
- * Function: dma_dwc_interrupt
- * arguments: irq, dev_id, pt_regs
- * returns channel number if available else -1
- * Interrupt Handler for DW AHB SATA DMA
- */
-static irqreturn_t dma_dwc_interrupt(int irq, void *hsdev_instance)
-{
- int chan;
- u32 tfr_reg, err_reg;
unsigned long flags;
struct sata_dwc_device *hsdev = hsdev_instance;
struct ata_host *host = (struct ata_host *)hsdev->host;
@@ -487,341 +281,65 @@ static irqreturn_t dma_dwc_interrupt(int irq, void *hsdev_instance)
hsdevp = HSDEVP_FROM_AP(ap);
tag = ap->link.active_tag;
- tfr_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.tfr\
- .low));
- err_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.error\
- .low));
-
- dev_dbg(ap->dev, "eot=0x%08x err=0x%08x pending=%d active port=%d\n",
- tfr_reg, err_reg, hsdevp->dma_pending[tag], port);
-
- chan = host_pvt.dma_channel;
- if (chan >= 0) {
- /* Check for end-of-transfer interrupt. */
- if (tfr_reg & DMA_CHANNEL(chan)) {
- /*
- * Each DMA command produces 2 interrupts. Only
- * complete the command after both interrupts have been
- * seen. (See sata_dwc_isr())
- */
- host_pvt.dma_interrupt_count++;
- sata_dwc_clear_dmacr(hsdevp, tag);
-
- if (hsdevp->dma_pending[tag] ==
- SATA_DWC_DMA_PENDING_NONE) {
- dev_err(ap->dev, "DMA not pending eot=0x%08x "
- "err=0x%08x tag=0x%02x pending=%d\n",
- tfr_reg, err_reg, tag,
- hsdevp->dma_pending[tag]);
- }
-
- if ((host_pvt.dma_interrupt_count % 2) == 0)
- sata_dwc_dma_xfer_complete(ap, 1);
-
- /* Clear the interrupt */
- out_le32(&(host_pvt.sata_dma_regs->interrupt_clear\
- .tfr.low),
- DMA_CHANNEL(chan));
- }
-
- /* Check for error interrupt. */
- if (err_reg & DMA_CHANNEL(chan)) {
- /* TODO Need error handler ! */
- dev_err(ap->dev, "error interrupt err_reg=0x%08x\n",
- err_reg);
-
- /* Clear the interrupt. */
- out_le32(&(host_pvt.sata_dma_regs->interrupt_clear\
- .error.low),
- DMA_CHANNEL(chan));
- }
- }
- spin_unlock_irqrestore(&host->lock, flags);
- return IRQ_HANDLED;
-}
-
-/*
- * Function: dma_request_interrupts
- * arguments: hsdev
- * returns status
- * This function registers ISR for a particular DMA channel interrupt
- */
-static int dma_request_interrupts(struct sata_dwc_device *hsdev, int irq)
-{
- int retval = 0;
- int chan = host_pvt.dma_channel;
-
- if (chan >= 0) {
- /* Unmask error interrupt */
- out_le32(&(host_pvt.sata_dma_regs)->interrupt_mask.error.low,
- DMA_ENABLE_CHAN(chan));
-
- /* Unmask end-of-transfer interrupt */
- out_le32(&(host_pvt.sata_dma_regs)->interrupt_mask.tfr.low,
- DMA_ENABLE_CHAN(chan));
- }
-
- retval = request_irq(irq, dma_dwc_interrupt, 0, "SATA DMA", hsdev);
- if (retval) {
- dev_err(host_pvt.dwc_dev, "%s: could not get IRQ %d\n",
- __func__, irq);
- return -ENODEV;
- }
-
- /* Mark this interrupt as requested */
- hsdev->irq_dma = irq;
- return 0;
-}
-
-/*
- * Function: map_sg_to_lli
- * The Synopsis driver has a comment proposing that better performance
- * is possible by only enabling interrupts on the last item in the linked list.
- * However, it seems that could be a problem if an error happened on one of the
- * first items. The transfer would halt, but no error interrupt would occur.
- * Currently this function sets interrupts enabled for each linked list item:
- * DMA_CTL_INT_EN.
- */
-static int map_sg_to_lli(struct scatterlist *sg, int num_elems,
- struct lli *lli, dma_addr_t dma_lli,
- void __iomem *dmadr_addr, int dir)
-{
- int i, idx = 0;
- int fis_len = 0;
- dma_addr_t next_llp;
- int bl;
- int sms_val, dms_val;
-
- sms_val = 0;
- dms_val = 1 + host_pvt.dma_channel;
- dev_dbg(host_pvt.dwc_dev,
- "%s: sg=%p nelem=%d lli=%p dma_lli=0x%pad dmadr=0x%p\n",
- __func__, sg, num_elems, lli, &dma_lli, dmadr_addr);
-
- bl = get_burst_length_encode(AHB_DMA_BRST_DFLT);
-
- for (i = 0; i < num_elems; i++, sg++) {
- u32 addr, offset;
- u32 sg_len, len;
-
- addr = (u32) sg_dma_address(sg);
- sg_len = sg_dma_len(sg);
-
- dev_dbg(host_pvt.dwc_dev, "%s: elem=%d sg_addr=0x%x sg_len"
- "=%d\n", __func__, i, addr, sg_len);
-
- while (sg_len) {
- if (idx >= SATA_DWC_DMAC_LLI_NUM) {
- /* The LLI table is not large enough. */
- dev_err(host_pvt.dwc_dev, "LLI table overrun "
- "(idx=%d)\n", idx);
- break;
- }
- len = (sg_len > SATA_DWC_DMAC_CTRL_TSIZE_MAX) ?
- SATA_DWC_DMAC_CTRL_TSIZE_MAX : sg_len;
-
- offset = addr & 0xffff;
- if ((offset + sg_len) > 0x10000)
- len = 0x10000 - offset;
-
- /*
- * Make sure a LLI block is not created that will span
- * 8K max FIS boundary. If the block spans such a FIS
- * boundary, there is a chance that a DMA burst will
- * cross that boundary -- this results in an error in
- * the host controller.
- */
- if (fis_len + len > 8192) {
- dev_dbg(host_pvt.dwc_dev, "SPLITTING: fis_len="
- "%d(0x%x) len=%d(0x%x)\n", fis_len,
- fis_len, len, len);
- len = 8192 - fis_len;
- fis_len = 0;
- } else {
- fis_len += len;
- }
- if (fis_len == 8192)
- fis_len = 0;
-
- /*
- * Set DMA addresses and lower half of control register
- * based on direction.
- */
- if (dir == DMA_FROM_DEVICE) {
- lli[idx].dar = cpu_to_le32(addr);
- lli[idx].sar = cpu_to_le32((u32)dmadr_addr);
-
- lli[idx].ctl.low = cpu_to_le32(
- DMA_CTL_TTFC(DMA_CTL_TTFC_P2M_DMAC) |
- DMA_CTL_SMS(sms_val) |
- DMA_CTL_DMS(dms_val) |
- DMA_CTL_SRC_MSIZE(bl) |
- DMA_CTL_DST_MSIZE(bl) |
- DMA_CTL_SINC_NOCHANGE |
- DMA_CTL_SRC_TRWID(2) |
- DMA_CTL_DST_TRWID(2) |
- DMA_CTL_INT_EN |
- DMA_CTL_LLP_SRCEN |
- DMA_CTL_LLP_DSTEN);
- } else { /* DMA_TO_DEVICE */
- lli[idx].sar = cpu_to_le32(addr);
- lli[idx].dar = cpu_to_le32((u32)dmadr_addr);
-
- lli[idx].ctl.low = cpu_to_le32(
- DMA_CTL_TTFC(DMA_CTL_TTFC_M2P_PER) |
- DMA_CTL_SMS(dms_val) |
- DMA_CTL_DMS(sms_val) |
- DMA_CTL_SRC_MSIZE(bl) |
- DMA_CTL_DST_MSIZE(bl) |
- DMA_CTL_DINC_NOCHANGE |
- DMA_CTL_SRC_TRWID(2) |
- DMA_CTL_DST_TRWID(2) |
- DMA_CTL_INT_EN |
- DMA_CTL_LLP_SRCEN |
- DMA_CTL_LLP_DSTEN);
- }
-
- dev_dbg(host_pvt.dwc_dev, "%s setting ctl.high len: "
- "0x%08x val: 0x%08x\n", __func__,
- len, DMA_CTL_BLK_TS(len / 4));
-
- /* Program the LLI CTL high register */
- lli[idx].ctl.high = cpu_to_le32(DMA_CTL_BLK_TS\
- (len / 4));
-
- /* Program the next pointer. The next pointer must be
- * the physical address, not the virtual address.
- */
- next_llp = (dma_lli + ((idx + 1) * sizeof(struct \
- lli)));
-
- /* The last 2 bits encode the list master select. */
- next_llp = DMA_LLP_LMS(next_llp, DMA_LLP_AHBMASTER2);
-
- lli[idx].llp = cpu_to_le32(next_llp);
- idx++;
- sg_len -= len;
- addr += len;
- }
- }
-
/*
- * The last next ptr has to be zero and the last control low register
- * has to have LLP_SRC_EN and LLP_DST_EN (linked list pointer source
- * and destination enable) set back to 0 (disabled.) This is what tells
- * the core that this is the last item in the linked list.
+ * Each DMA command produces 2 interrupts. Only
+ * complete the command after both interrupts have been
+ * seen. (See sata_dwc_isr())
*/
- if (idx) {
- lli[idx-1].llp = 0x00000000;
- lli[idx-1].ctl.low &= DMA_CTL_LLP_DISABLE_LE32;
+ hsdevp->dma_interrupt_count++;
+ sata_dwc_clear_dmacr(hsdevp, tag);
- /* Flush cache to memory */
- dma_cache_sync(NULL, lli, (sizeof(struct lli) * idx),
- DMA_BIDIRECTIONAL);
+ if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_NONE) {
+ dev_err(ap->dev, "DMA not pending tag=0x%02x pending=%d\n",
+ tag, hsdevp->dma_pending[tag]);
}
- return idx;
-}
+ if ((hsdevp->dma_interrupt_count % 2) == 0)
+ sata_dwc_dma_xfer_complete(ap, 1);
-/*
- * Function: dma_dwc_xfer_start
- * arguments: Channel number
- * Return : None
- * Enables the DMA channel
- */
-static void dma_dwc_xfer_start(int dma_ch)
-{
- /* Enable the DMA channel */
- out_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low),
- in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)) |
- DMA_ENABLE_CHAN(dma_ch));
+ spin_unlock_irqrestore(&host->lock, flags);
}
-static int dma_dwc_xfer_setup(struct scatterlist *sg, int num_elems,
- struct lli *lli, dma_addr_t dma_lli,
- void __iomem *addr, int dir)
+static struct dma_async_tx_descriptor *dma_dwc_xfer_setup(struct ata_queued_cmd *qc)
{
- int dma_ch;
- int num_lli;
- /* Acquire DMA channel */
- dma_ch = dma_request_channel();
- if (dma_ch == -1) {
- dev_err(host_pvt.dwc_dev, "%s: dma channel unavailable\n",
- __func__);
- return -EAGAIN;
+ struct ata_port *ap = qc->ap;
+ struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+ struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+ dma_addr_t addr = (dma_addr_t)&hsdev->sata_dwc_regs->dmadr;
+ struct dma_slave_config sconf;
+ struct dma_async_tx_descriptor *desc;
+
+ if (qc->dma_dir == DMA_DEV_TO_MEM) {
+ sconf.src_addr = addr;
+ sconf.device_fc = true;
+ } else { /* DMA_MEM_TO_DEV */
+ sconf.dst_addr = addr;
+ sconf.device_fc = false;
}
- /* Convert SG list to linked list of items (LLIs) for AHB DMA */
- num_lli = map_sg_to_lli(sg, num_elems, lli, dma_lli, addr, dir);
-
- dev_dbg(host_pvt.dwc_dev, "%s sg: 0x%p, count: %d lli: %p dma_lli:"
- " 0x%0xlx addr: %p lli count: %d\n", __func__, sg, num_elems,
- lli, (u32)dma_lli, addr, num_lli);
-
- clear_chan_interrupts(dma_ch);
+ sconf.direction = qc->dma_dir;
+ sconf.src_maxburst = AHB_DMA_BRST_DFLT;
+ sconf.dst_maxburst = AHB_DMA_BRST_DFLT;
+ sconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ sconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- /* Program the CFG register. */
- out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].cfg.high),
- DMA_CFG_HW_HS_SRC(dma_ch) | DMA_CFG_HW_HS_DEST(dma_ch) |
- DMA_CFG_PROTCTL | DMA_CFG_FCMOD_REQ);
- out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].cfg.low),
- DMA_CFG_HW_CH_PRIOR(dma_ch));
+ dmaengine_slave_config(hsdevp->chan, &sconf);
- /* Program the address of the linked list */
- out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].llp.low),
- DMA_LLP_LMS(dma_lli, DMA_LLP_AHBMASTER2));
-
- /* Program the CTL register with src enable / dst enable */
- out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].ctl.low),
- DMA_CTL_LLP_SRCEN | DMA_CTL_LLP_DSTEN);
- return dma_ch;
-}
-
-/*
- * Function: dma_dwc_exit
- * arguments: None
- * returns status
- * This function exits the SATA DMA driver
- */
-static void dma_dwc_exit(struct sata_dwc_device *hsdev)
-{
- dev_dbg(host_pvt.dwc_dev, "%s:\n", __func__);
- if (host_pvt.sata_dma_regs) {
- iounmap((void __iomem *)host_pvt.sata_dma_regs);
- host_pvt.sata_dma_regs = NULL;
- }
-
- if (hsdev->irq_dma) {
- free_irq(hsdev->irq_dma, hsdev);
- hsdev->irq_dma = 0;
- }
-}
-
-/*
- * Function: dma_dwc_init
- * arguments: hsdev
- * returns status
- * This function initializes the SATA DMA driver
- */
-static int dma_dwc_init(struct sata_dwc_device *hsdev, int irq)
-{
- int err;
+ /* Convert SG list to linked list of items (LLIs) for AHB DMA */
+ desc = dmaengine_prep_slave_sg(hsdevp->chan, qc->sg, qc->n_elem,
+ qc->dma_dir,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- err = dma_request_interrupts(hsdev, irq);
- if (err) {
- dev_err(host_pvt.dwc_dev, "%s: dma_request_interrupts returns"
- " %d\n", __func__, err);
- return err;
- }
+ if (!desc)
+ return NULL;
- /* Enabe DMA */
- out_le32(&(host_pvt.sata_dma_regs->dma_cfg.low), DMA_EN);
+ desc->callback = dma_dwc_xfer_done;
+ desc->callback_param = hsdev;
- dev_notice(host_pvt.dwc_dev, "DMA initialized\n");
- dev_dbg(host_pvt.dwc_dev, "SATA DMA registers=0x%p\n", host_pvt.\
- sata_dma_regs);
+ dev_dbg(hsdev->dev, "%s sg: 0x%p, count: %d addr: %pad\n",
+ __func__, qc->sg, qc->n_elem, &addr);
- return 0;
+ return desc;
}
static int sata_dwc_scr_read(struct ata_link *link, unsigned int scr, u32 *val)
@@ -891,21 +409,18 @@ static void sata_dwc_error_intr(struct ata_port *ap,
struct ata_queued_cmd *qc;
u32 serror;
u8 status, tag;
- u32 err_reg;
ata_ehi_clear_desc(ehi);
serror = core_scr_read(SCR_ERROR);
status = ap->ops->sff_check_status(ap);
- err_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.error.\
- low));
tag = ap->link.active_tag;
- dev_err(ap->dev, "%s SCR_ERROR=0x%08x intpr=0x%08x status=0x%08x "
- "dma_intp=%d pending=%d issued=%d dma_err_status=0x%08x\n",
- __func__, serror, intpr, status, host_pvt.dma_interrupt_count,
- hsdevp->dma_pending[tag], hsdevp->cmd_issued[tag], err_reg);
+ dev_err(ap->dev,
+ "%s SCR_ERROR=0x%08x intpr=0x%08x status=0x%08x dma_intp=%d pending=%d issued=%d",
+ __func__, serror, intpr, status, hsdevp->dma_interrupt_count,
+ hsdevp->dma_pending[tag], hsdevp->cmd_issued[tag]);
/* Clear error register and interrupt bit */
clear_serror();
@@ -1003,8 +518,9 @@ static irqreturn_t sata_dwc_isr(int irq, void *dev_instance)
/* DEV interrupt w/ no active qc? */
if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
- dev_err(ap->dev, "%s interrupt with no active qc "
- "qc=%p\n", __func__, qc);
+ dev_err(ap->dev,
+ "%s interrupt with no active qc qc=%p\n",
+ __func__, qc);
ap->ops->sff_check_status(ap);
handled = 1;
goto DONE;
@@ -1031,16 +547,16 @@ DRVSTILLBUSY:
* operation done interrupt. The command should be
* completed only after both interrupts are seen.
*/
- host_pvt.dma_interrupt_count++;
+ hsdevp->dma_interrupt_count++;
if (hsdevp->dma_pending[tag] == \
SATA_DWC_DMA_PENDING_NONE) {
- dev_err(ap->dev, "%s: DMA not pending "
- "intpr=0x%08x status=0x%08x pending"
- "=%d\n", __func__, intpr, status,
+ dev_err(ap->dev,
+ "%s: DMA not pending intpr=0x%08x status=0x%08x pending=%d\n",
+ __func__, intpr, status,
hsdevp->dma_pending[tag]);
}
- if ((host_pvt.dma_interrupt_count % 2) == 0)
+ if ((hsdevp->dma_interrupt_count % 2) == 0)
sata_dwc_dma_xfer_complete(ap, 1);
} else if (ata_is_pio(qc->tf.protocol)) {
ata_sff_hsm_move(ap, qc, status, 0);
@@ -1068,17 +584,17 @@ DRVSTILLBUSY:
if (sactive != 0 || (host_pvt.sata_dwc_sactive_issued) > 1 || \
tag_mask > 1) {
- dev_dbg(ap->dev, "%s NCQ:sactive=0x%08x sactive_issued=0x%08x"
- "tag_mask=0x%08x\n", __func__, sactive,
- host_pvt.sata_dwc_sactive_issued, tag_mask);
+ dev_dbg(ap->dev,
+ "%s NCQ:sactive=0x%08x sactive_issued=0x%08x tag_mask=0x%08x\n",
+ __func__, sactive, host_pvt.sata_dwc_sactive_issued,
+ tag_mask);
}
if ((tag_mask | (host_pvt.sata_dwc_sactive_issued)) != \
(host_pvt.sata_dwc_sactive_issued)) {
- dev_warn(ap->dev, "Bad tag mask? sactive=0x%08x "
- "(host_pvt.sata_dwc_sactive_issued)=0x%08x tag_mask"
- "=0x%08x\n", sactive, host_pvt.sata_dwc_sactive_issued,
- tag_mask);
+ dev_warn(ap->dev,
+ "Bad tag mask? sactive=0x%08x (host_pvt.sata_dwc_sactive_issued)=0x%08x tag_mask=0x%08x\n",
+ sactive, host_pvt.sata_dwc_sactive_issued, tag_mask);
}
/* read just to clear ... not bad if currently still busy */
@@ -1114,12 +630,12 @@ DRVSTILLBUSY:
dev_dbg(ap->dev, "%s NCQ command, protocol: %s\n", __func__,
get_prot_descript(qc->tf.protocol));
if (ata_is_dma(qc->tf.protocol)) {
- host_pvt.dma_interrupt_count++;
+ hsdevp->dma_interrupt_count++;
if (hsdevp->dma_pending[tag] == \
SATA_DWC_DMA_PENDING_NONE)
dev_warn(ap->dev, "%s: DMA not pending?\n",
__func__);
- if ((host_pvt.dma_interrupt_count % 2) == 0)
+ if ((hsdevp->dma_interrupt_count % 2) == 0)
sata_dwc_dma_xfer_complete(ap, 1);
} else {
if (unlikely(sata_dwc_qc_complete(ap, qc, 1)))
@@ -1142,8 +658,9 @@ STILLBUSY:
*/
sactive2 = core_scr_read(SCR_ACTIVE);
if (sactive2 != sactive) {
- dev_dbg(ap->dev, "More completed - sactive=0x%x sactive2"
- "=0x%x\n", sactive, sactive2);
+ dev_dbg(ap->dev,
+ "More completed - sactive=0x%x sactive2=0x%x\n",
+ sactive, sactive2);
}
handled = 1;
@@ -1169,11 +686,10 @@ static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag)
* This should not happen, it indicates the driver is out of
* sync. If it does happen, clear dmacr anyway.
*/
- dev_err(host_pvt.dwc_dev, "%s DMA protocol RX and"
- "TX DMA not pending tag=0x%02x pending=%d"
- " dmacr: 0x%08x\n", __func__, tag,
- hsdevp->dma_pending[tag],
- in_le32(&(hsdev->sata_dwc_regs->dmacr)));
+ dev_err(hsdev->dev,
+ "%s DMA protocol RX and TX DMA not pending tag=0x%02x pending=%d dmacr: 0x%08x\n",
+ __func__, tag, hsdevp->dma_pending[tag],
+ in_le32(&hsdev->sata_dwc_regs->dmacr));
out_le32(&(hsdev->sata_dwc_regs->dmacr),
SATA_DWC_DMACR_TXRXCH_CLEAR);
}
@@ -1195,8 +711,9 @@ static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status)
#ifdef DEBUG_NCQ
if (tag > 0) {
- dev_info(ap->dev, "%s tag=%u cmd=0x%02x dma dir=%s proto=%s "
- "dmacr=0x%08x\n", __func__, qc->tag, qc->tf.command,
+ dev_info(ap->dev,
+ "%s tag=%u cmd=0x%02x dma dir=%s proto=%s dmacr=0x%08x\n",
+ __func__, qc->tag, qc->tf.command,
get_dma_dir_descript(qc->dma_dir),
get_prot_descript(qc->tf.protocol),
in_le32(&(hsdev->sata_dwc_regs->dmacr)));
@@ -1205,8 +722,9 @@ static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status)
if (ata_is_dma(qc->tf.protocol)) {
if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_NONE) {
- dev_err(ap->dev, "%s DMA protocol RX and TX DMA not "
- "pending dmacr: 0x%08x\n", __func__,
+ dev_err(ap->dev,
+ "%s DMA protocol RX and TX DMA not pending dmacr: 0x%08x\n",
+ __func__,
in_le32(&(hsdev->sata_dwc_regs->dmacr)));
}
@@ -1232,9 +750,9 @@ static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc,
dev_err(ap->dev, "TX DMA PENDING\n");
else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX)
dev_err(ap->dev, "RX DMA PENDING\n");
- dev_dbg(ap->dev, "QC complete cmd=0x%02x status=0x%02x ata%u:"
- " protocol=%d\n", qc->tf.command, status, ap->print_id,
- qc->tf.protocol);
+ dev_dbg(ap->dev,
+ "QC complete cmd=0x%02x status=0x%02x ata%u: protocol=%d\n",
+ qc->tf.command, status, ap->print_id, qc->tf.protocol);
/* clear active bit */
mask = (~(qcmd_tag_to_mask(tag)));
@@ -1260,11 +778,23 @@ static void sata_dwc_enable_interrupts(struct sata_dwc_device *hsdev)
*/
out_le32(&hsdev->sata_dwc_regs->errmr, SATA_DWC_SERROR_ERR_BITS);
- dev_dbg(host_pvt.dwc_dev, "%s: INTMR = 0x%08x, ERRMR = 0x%08x\n",
+ dev_dbg(hsdev->dev, "%s: INTMR = 0x%08x, ERRMR = 0x%08x\n",
__func__, in_le32(&hsdev->sata_dwc_regs->intmr),
in_le32(&hsdev->sata_dwc_regs->errmr));
}
+static bool sata_dwc_dma_filter(struct dma_chan *chan, void *param)
+{
+ struct sata_dwc_device_port *hsdevp = param;
+ struct dw_dma_slave *dws = hsdevp->dws;
+
+ if (dws->dma_dev != chan->device->dev)
+ return false;
+
+ chan->private = dws;
+ return true;
+}
+
static void sata_dwc_setup_port(struct ata_ioports *port, unsigned long base)
{
port->cmd_addr = (void __iomem *)base + 0x00;
@@ -1299,6 +829,7 @@ static int sata_dwc_port_start(struct ata_port *ap)
struct sata_dwc_device *hsdev;
struct sata_dwc_device_port *hsdevp = NULL;
struct device *pdev;
+ dma_cap_mask_t mask;
int i;
hsdev = HSDEV_FROM_AP(ap);
@@ -1322,29 +853,27 @@ static int sata_dwc_port_start(struct ata_port *ap)
}
hsdevp->hsdev = hsdev;
+ hsdevp->dws = &sata_dwc_dma_dws;
+ hsdevp->dws->dma_dev = hsdev->dev;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ /* Acquire DMA channel */
+ hsdevp->chan = dma_request_channel(mask, sata_dwc_dma_filter, hsdevp);
+ if (!hsdevp->chan) {
+ dev_err(hsdev->dev, "%s: dma channel unavailable\n",
+ __func__);
+ err = -EAGAIN;
+ goto CLEANUP_ALLOC;
+ }
+
for (i = 0; i < SATA_DWC_QCMD_MAX; i++)
hsdevp->cmd_issued[i] = SATA_DWC_CMD_ISSUED_NOT;
ap->bmdma_prd = NULL; /* set these so libata doesn't use them */
ap->bmdma_prd_dma = 0;
- /*
- * DMA - Assign scatter gather LLI table. We can't use the libata
- * version since it's PRD is IDE PCI specific.
- */
- for (i = 0; i < SATA_DWC_QCMD_MAX; i++) {
- hsdevp->llit[i] = dma_alloc_coherent(pdev,
- SATA_DWC_DMAC_LLI_TBL_SZ,
- &(hsdevp->llit_dma[i]),
- GFP_ATOMIC);
- if (!hsdevp->llit[i]) {
- dev_err(ap->dev, "%s: dma_alloc_coherent failed\n",
- __func__);
- err = -ENOMEM;
- goto CLEANUP_ALLOC;
- }
- }
-
if (ap->port_no == 0) {
dev_dbg(ap->dev, "%s: clearing TXCHEN, RXCHEN in DMAC\n",
__func__);
@@ -1373,22 +902,14 @@ CLEANUP:
static void sata_dwc_port_stop(struct ata_port *ap)
{
- int i;
- struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
dev_dbg(ap->dev, "%s: ap->id = %d\n", __func__, ap->print_id);
- if (hsdevp && hsdev) {
- /* deallocate LLI table */
- for (i = 0; i < SATA_DWC_QCMD_MAX; i++) {
- dma_free_coherent(ap->host->dev,
- SATA_DWC_DMAC_LLI_TBL_SZ,
- hsdevp->llit[i], hsdevp->llit_dma[i]);
- }
+ dmaengine_terminate_all(hsdevp->chan);
+ dma_release_channel(hsdevp->chan);
- kfree(hsdevp);
- }
+ kfree(hsdevp);
ap->private_data = NULL;
}
@@ -1444,12 +965,12 @@ static void sata_dwc_bmdma_setup(struct ata_queued_cmd *qc)
static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag)
{
int start_dma;
- u32 reg, dma_chan;
+ u32 reg;
struct sata_dwc_device *hsdev = HSDEV_FROM_QC(qc);
struct ata_port *ap = qc->ap;
struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+ struct dma_async_tx_descriptor *desc = hsdevp->desc[tag];
int dir = qc->dma_dir;
- dma_chan = hsdevp->dma_chan[tag];
if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_NOT) {
start_dma = 1;
@@ -1458,16 +979,17 @@ static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag)
else
hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_RX;
} else {
- dev_err(ap->dev, "%s: Command not pending cmd_issued=%d "
- "(tag=%d) DMA NOT started\n", __func__,
- hsdevp->cmd_issued[tag], tag);
+ dev_err(ap->dev,
+ "%s: Command not pending cmd_issued=%d (tag=%d) DMA NOT started\n",
+ __func__, hsdevp->cmd_issued[tag], tag);
start_dma = 0;
}
- dev_dbg(ap->dev, "%s qc=%p tag: %x cmd: 0x%02x dma_dir: %s "
- "start_dma? %x\n", __func__, qc, tag, qc->tf.command,
+ dev_dbg(ap->dev,
+ "%s qc=%p tag: %x cmd: 0x%02x dma_dir: %s start_dma? %x\n",
+ __func__, qc, tag, qc->tf.command,
get_dma_dir_descript(qc->dma_dir), start_dma);
- sata_dwc_tf_dump(&(qc->tf));
+ sata_dwc_tf_dump(ap, &qc->tf);
if (start_dma) {
reg = core_scr_read(SCR_ERROR);
@@ -1484,7 +1006,8 @@ static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag)
SATA_DWC_DMACR_RXCHEN);
/* Enable AHB DMA transfer on the specified channel */
- dma_dwc_xfer_start(dma_chan);
+ dmaengine_submit(desc);
+ dma_async_issue_pending(hsdevp->chan);
}
}
@@ -1510,26 +1033,21 @@ static void sata_dwc_bmdma_start(struct ata_queued_cmd *qc)
*/
static void sata_dwc_qc_prep_by_tag(struct ata_queued_cmd *qc, u8 tag)
{
- struct scatterlist *sg = qc->sg;
+ struct dma_async_tx_descriptor *desc;
struct ata_port *ap = qc->ap;
- int dma_chan;
- struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
dev_dbg(ap->dev, "%s: port=%d dma dir=%s n_elem=%d\n",
__func__, ap->port_no, get_dma_dir_descript(qc->dma_dir),
qc->n_elem);
- dma_chan = dma_dwc_xfer_setup(sg, qc->n_elem, hsdevp->llit[tag],
- hsdevp->llit_dma[tag],
- (void __iomem *)&hsdev->sata_dwc_regs->dmadr,
- qc->dma_dir);
- if (dma_chan < 0) {
- dev_err(ap->dev, "%s: dma_dwc_xfer_setup returns err %d\n",
- __func__, dma_chan);
+ desc = dma_dwc_xfer_setup(qc);
+ if (!desc) {
+ dev_err(ap->dev, "%s: dma_dwc_xfer_setup returns NULL\n",
+ __func__);
return;
}
- hsdevp->dma_chan[tag] = dma_chan;
+ hsdevp->desc[tag] = desc;
}
static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc)
@@ -1540,8 +1058,8 @@ static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc)
#ifdef DEBUG_NCQ
if (qc->tag > 0 || ap->link.sactive > 1)
- dev_info(ap->dev, "%s ap id=%d cmd(0x%02x)=%s qc tag=%d "
- "prot=%s ap active_tag=0x%08x ap sactive=0x%08x\n",
+ dev_info(ap->dev,
+ "%s ap id=%d cmd(0x%02x)=%s qc tag=%d prot=%s ap active_tag=0x%08x ap sactive=0x%08x\n",
__func__, ap->print_id, qc->tf.command,
ata_get_cmd_descript(qc->tf.command),
qc->tag, get_prot_descript(qc->tf.protocol),
@@ -1557,9 +1075,9 @@ static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc)
sactive |= (0x00000001 << tag);
core_scr_write(SCR_ACTIVE, sactive);
- dev_dbg(qc->ap->dev, "%s: tag=%d ap->link.sactive = 0x%08x "
- "sactive=0x%08x\n", __func__, tag, qc->ap->link.sactive,
- sactive);
+ dev_dbg(qc->ap->dev,
+ "%s: tag=%d ap->link.sactive = 0x%08x sactive=0x%08x\n",
+ __func__, tag, qc->ap->link.sactive, sactive);
ap->ops->sff_tf_load(ap, &qc->tf);
sata_dwc_exec_command_by_tag(ap, &qc->tf, qc->tag,
@@ -1673,7 +1191,6 @@ static int sata_dwc_probe(struct platform_device *ofdev)
struct ata_port_info pi = sata_dwc_port_info[0];
const struct ata_port_info *ppi[] = { &pi, NULL };
struct device_node *np = ofdev->dev.of_node;
- u32 dma_chan;
/* Allocate DWC SATA device */
host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_DWC_MAX_PORTS);
@@ -1683,18 +1200,11 @@ static int sata_dwc_probe(struct platform_device *ofdev)
host->private_data = hsdev;
- if (of_property_read_u32(np, "dma-channel", &dma_chan)) {
- dev_warn(&ofdev->dev, "no dma-channel property set."
- " Use channel 0\n");
- dma_chan = 0;
- }
- host_pvt.dma_channel = dma_chan;
-
/* Ioremap SATA registers */
base = of_iomap(np, 0);
if (!base) {
- dev_err(&ofdev->dev, "ioremap failed for SATA register"
- " address\n");
+ dev_err(&ofdev->dev,
+ "ioremap failed for SATA register address\n");
return -ENODEV;
}
hsdev->reg_base = base;
@@ -1716,27 +1226,29 @@ static int sata_dwc_probe(struct platform_device *ofdev)
idr, ver[0], ver[1], ver[2]);
/* Get SATA DMA interrupt number */
- irq = irq_of_parse_and_map(np, 1);
- if (irq == NO_IRQ) {
+ hsdev->dma->irq = irq_of_parse_and_map(np, 1);
+ if (hsdev->dma->irq == NO_IRQ) {
dev_err(&ofdev->dev, "no SATA DMA irq\n");
err = -ENODEV;
goto error_iomap;
}
/* Get physical SATA DMA register base address */
- host_pvt.sata_dma_regs = (void *)of_iomap(np, 1);
- if (!(host_pvt.sata_dma_regs)) {
- dev_err(&ofdev->dev, "ioremap failed for AHBDMA register"
- " address\n");
+ hsdev->dma->regs = of_iomap(np, 1);
+ if (!hsdev->dma->regs) {
+ dev_err(&ofdev->dev,
+ "ioremap failed for AHBDMA register address\n");
err = -ENODEV;
goto error_iomap;
}
/* Save dev for later use in dev_xxx() routines */
- host_pvt.dwc_dev = &ofdev->dev;
+ hsdev->dev = &ofdev->dev;
+
+ hsdev->dma->dev = &ofdev->dev;
/* Initialize AHB DMAC */
- err = dma_dwc_init(hsdev, irq);
+ err = dw_dma_probe(hsdev->dma, NULL);
if (err)
goto error_dma_iomap;
@@ -1765,9 +1277,9 @@ static int sata_dwc_probe(struct platform_device *ofdev)
error_out:
/* Free SATA DMA resources */
- dma_dwc_exit(hsdev);
+ dw_dma_remove(hsdev->dma);
error_dma_iomap:
- iounmap((void __iomem *)host_pvt.sata_dma_regs);
+ iounmap(hsdev->dma->regs);
error_iomap:
iounmap(base);
return err;
@@ -1782,9 +1294,9 @@ static int sata_dwc_remove(struct platform_device *ofdev)
ata_host_detach(host);
/* Free SATA DMA resources */
- dma_dwc_exit(hsdev);
+ dw_dma_remove(hsdev->dma);
- iounmap((void __iomem *)host_pvt.sata_dma_regs);
+ iounmap(hsdev->dma->regs);
iounmap(hsdev->reg_base);
dev_dbg(&ofdev->dev, "done\n");
return 0;
@@ -1809,5 +1321,5 @@ module_platform_driver(sata_dwc_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Mark Miesfeld <mmiesfeld@amcc.com>");
-MODULE_DESCRIPTION("DesignWare Cores SATA controller low lever driver");
+MODULE_DESCRIPTION("DesignWare Cores SATA controller low level driver");
MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 069827826b20..e81a8217f1ff 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -856,13 +856,13 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
}
/* Set dma_mask. This devices doesn't support 64bit addressing. */
- rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
}
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev, "32-bit consistent DMA enable failed\n");
return rc;
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index f8c33e3772b8..bd74ee555278 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -306,6 +306,11 @@ enum {
MV5_PHY_CTL = 0x0C,
SATA_IFCFG = 0x050,
LP_PHY_CTL = 0x058,
+ LP_PHY_CTL_PIN_PU_PLL = (1 << 0),
+ LP_PHY_CTL_PIN_PU_RX = (1 << 1),
+ LP_PHY_CTL_PIN_PU_TX = (1 << 2),
+ LP_PHY_CTL_GEN_TX_3G = (1 << 5),
+ LP_PHY_CTL_GEN_RX_3G = (1 << 9),
MV_M2_PREAMP_MASK = 0x7e0,
@@ -1391,10 +1396,17 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)
/*
* Set PHY speed according to SControl speed.
*/
- if ((val & 0xf0) == 0x10)
- writelfl(0x7, lp_phy_addr);
- else
- writelfl(0x227, lp_phy_addr);
+ u32 lp_phy_val =
+ LP_PHY_CTL_PIN_PU_PLL |
+ LP_PHY_CTL_PIN_PU_RX |
+ LP_PHY_CTL_PIN_PU_TX;
+
+ if ((val & 0xf0) != 0x10)
+ lp_phy_val |=
+ LP_PHY_CTL_GEN_TX_3G |
+ LP_PHY_CTL_GEN_RX_3G;
+
+ writelfl(lp_phy_val, lp_phy_addr);
}
}
writelfl(val, addr);
@@ -4308,10 +4320,10 @@ static int pci_go_64(struct pci_dev *pdev)
{
int rc;
- if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
+ rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
if (rc) {
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev,
"64-bit DMA enable failed\n");
@@ -4319,12 +4331,12 @@ static int pci_go_64(struct pci_dev *pdev)
}
}
} else {
- rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
}
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev,
"32-bit consistent DMA enable failed\n");
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 1db6f5ce5e89..7ece85f43020 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -756,10 +756,10 @@ static int nv_adma_slave_config(struct scsi_device *sdev)
blk_queue_bounce_limit(sdev1->request_queue,
ATA_DMA_MASK);
- pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ dma_set_mask(&pdev->dev, ATA_DMA_MASK);
} else {
/** This shouldn't fail as it was set to this value before */
- pci_set_dma_mask(pdev, pp->adma_dma_mask);
+ dma_set_mask(&pdev->dev, pp->adma_dma_mask);
if (sdev0)
blk_queue_bounce_limit(sdev0->request_queue,
pp->adma_dma_mask);
@@ -1133,10 +1133,10 @@ static int nv_adma_port_start(struct ata_port *ap)
/* Ensure DMA mask is set to 32-bit before allocating legacy PRD and
pad buffers */
- rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc)
return rc;
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc)
return rc;
@@ -1161,8 +1161,8 @@ static int nv_adma_port_start(struct ata_port *ap)
These are allowed to fail since we store the value that ends up
being used to set as the bounce limit in slave_config later if
needed. */
- pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
- pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
+ dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
pp->adma_dma_mask = *dev->dma_mask;
mem = dmam_alloc_coherent(dev, NV_ADMA_PORT_PRIV_DMA_SZ,
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 3638887476f6..0fa211e2831c 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -1246,10 +1246,10 @@ static int pdc_ata_init_one(struct pci_dev *pdev,
/* initialize adapter */
pdc_host_init(host);
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
- rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 9a6bd4cd29a0..af987a4f33d1 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -557,10 +557,10 @@ static int qs_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
int rc, have_64bit_bus = (bus_info & QS_HPHY_64BIT);
if (have_64bit_bus &&
- !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
+ rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
if (rc) {
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev,
"64-bit DMA enable failed\n");
@@ -568,12 +568,12 @@ static int qs_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
}
}
} else {
- rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
}
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev,
"32-bit consistent DMA enable failed\n");
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 40b76b2d18c6..dea6edcbf145 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -770,10 +770,10 @@ static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
return rc;
host->iomap = pcim_iomap_table(pdev);
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
- rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index ba2667fa0528..4b1995e2d044 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -246,7 +246,7 @@ enum {
/* host flags */
SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA |
ATA_FLAG_NCQ | ATA_FLAG_ACPI_SATA |
- ATA_FLAG_AN | ATA_FLAG_PMP | ATA_FLAG_LOWTAG,
+ ATA_FLAG_AN | ATA_FLAG_PMP,
SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */
IRQ_STAT_4PORTS = 0xf,
@@ -1312,10 +1312,10 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
host->iomap = iomap;
/* configure and activate the device */
- if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
+ rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
if (rc) {
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev,
"64-bit DMA enable failed\n");
@@ -1323,12 +1323,12 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
}
}
} else {
- rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
}
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev,
"32-bit consistent DMA enable failed\n");
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index c630fa812624..ff8307b30ff0 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -496,10 +496,10 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en
ata_port_pbar_desc(ap, 5, offset, "port");
}
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
- rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 39b5de60a1f9..3a18a8a719b4 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -1476,10 +1476,10 @@ static int pdc_sata_init_one(struct pci_dev *pdev,
}
/* configure and activate */
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
- rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 47bf89464cef..17d31fc009ab 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -502,10 +502,10 @@ static int vt6421_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
for (i = 0; i < host->n_ports; i++)
vt6421_init_addrs(host->ports[i]);
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
- rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
if (rc)
return rc;
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 29e847aac34b..183eb52085df 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -387,10 +387,10 @@ static int vsc_sata_init_one(struct pci_dev *pdev,
/*
* Use 32 bit DMA mask, because 64 bit address support is poor.
*/
- rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc)
return rc;
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (rc)
return rc;
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index d9c9829c8b20..e1180fa46196 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -148,8 +148,8 @@ u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat)
printk(KERN_CONT "DataRequest ");
if (stat & ATA_CORR)
printk(KERN_CONT "CorrectedError ");
- if (stat & ATA_IDX)
- printk(KERN_CONT "Index ");
+ if (stat & ATA_SENSE)
+ printk(KERN_CONT "Sense ");
if (stat & ATA_ERR)
printk(KERN_CONT "Error ");
}
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index a3d3b1733c49..0b63facd1d87 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -273,7 +273,7 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id, int irq_ctx)
(hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) {
a = tp_ops->read_altstatus(hwif);
s = tp_ops->read_status(hwif);
- if ((a ^ s) & ~ATA_IDX)
+ if ((a ^ s) & ~ATA_SENSE)
/* ancient Seagate drives, broken interfaces */
printk(KERN_INFO "%s: probing with STATUS(0x%02x) "
"instead of ALTSTATUS(0x%02x)\n",
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 4cdaffca17fc..c95a4e943fc6 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -26,6 +26,7 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
+#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
@@ -2586,3 +2587,33 @@ void scsi_build_sense_buffer(int desc, u8 *buf, u8 key, u8 asc, u8 ascq)
}
}
EXPORT_SYMBOL(scsi_build_sense_buffer);
+
+/**
+ * scsi_set_sense_information - set the information field in a
+ * formatted sense data buffer
+ * @buf: Where to build sense data
+ * @info: 64-bit information value to be set
+ *
+ **/
+void scsi_set_sense_information(u8 *buf, u64 info)
+{
+ if ((buf[0] & 0x7f) == 0x72) {
+ u8 *ucp, len;
+
+ len = buf[7];
+ ucp = (char *)scsi_sense_desc_find(buf, len + 8, 0);
+ if (!ucp) {
+ buf[7] = len + 0xa;
+ ucp = buf + 8 + len;
+ }
+ ucp[0] = 0;
+ ucp[1] = 0xa;
+ ucp[2] = 0x80; /* Valid bit */
+ ucp[3] = 0;
+ put_unaligned_be64(info, &ucp[4]);
+ } else if ((buf[0] & 0x7f) == 0x70) {
+ buf[0] |= 0x80;
+ put_unaligned_be64(info, &buf[3]);
+ }
+}
+EXPORT_SYMBOL(scsi_set_sense_information);