summaryrefslogtreecommitdiff
path: root/drivers/clk/samsung
diff options
context:
space:
mode:
authorSylwester Nawrocki <s.nawrocki@samsung.com>2016-09-09 10:09:05 +0200
committerSylwester Nawrocki <s.nawrocki@samsung.com>2016-09-09 17:35:13 +0200
commitbe95d2c7d918b2b7b973378a1e92bdc6559c21f9 (patch)
tree9888fb20a27881c24d85743b18b5787ddd2b763e /drivers/clk/samsung
parentc17a6163647a20d22fa03c00ba8714492b0311c6 (diff)
clk: samsung: Add support for EPLL on exynos5410
This patch adds code instantiating the EPLL, which is used as the audio subsystem's root clock. The requirement to specify the external root clock in clocks property is documented. Having the consumer 'clocks' property ensures proper initialization order by explicitly specifying dependencies in DT. It prevents situations when the SoC's clock controller driver has initialized, the external oscillator clock is not yet registered and setting clock frequencies through assigned-clock-rates property doesn't work properly due to unknown external oscillator frequency. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Diffstat (limited to 'drivers/clk/samsung')
-rw-r--r--drivers/clk/samsung/clk-exynos5410.c30
-rw-r--r--drivers/clk/samsung/clk-pll.c102
-rw-r--r--drivers/clk/samsung/clk-pll.h1
3 files changed, 131 insertions, 2 deletions
diff --git a/drivers/clk/samsung/clk-exynos5410.c b/drivers/clk/samsung/clk-exynos5410.c
index eefed92a59aa..fc471a49e8f4 100644
--- a/drivers/clk/samsung/clk-exynos5410.c
+++ b/drivers/clk/samsung/clk-exynos5410.c
@@ -14,6 +14,7 @@
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/clk.h>
#include "clk.h"
@@ -21,6 +22,8 @@
#define APLL_CON0 0x100
#define CPLL_LOCK 0x10020
#define CPLL_CON0 0x10120
+#define EPLL_LOCK 0x10040
+#define EPLL_CON0 0x10130
#define MPLL_LOCK 0x4000
#define MPLL_CON0 0x4100
#define BPLL_LOCK 0x20010
@@ -58,7 +61,7 @@
/* list of PLLs */
enum exynos5410_plls {
- apll, cpll, mpll,
+ apll, cpll, epll, mpll,
bpll, kpll,
nr_plls /* number of PLLs */
};
@@ -67,6 +70,7 @@ enum exynos5410_plls {
PNAME(apll_p) = { "fin_pll", "fout_apll", };
PNAME(bpll_p) = { "fin_pll", "fout_bpll", };
PNAME(cpll_p) = { "fin_pll", "fout_cpll" };
+PNAME(epll_p) = { "fin_pll", "fout_epll" };
PNAME(mpll_p) = { "fin_pll", "fout_mpll", };
PNAME(kpll_p) = { "fin_pll", "fout_kpll", };
@@ -95,6 +99,8 @@ static const struct samsung_mux_clock exynos5410_mux_clks[] __initconst = {
MUX(0, "sclk_bpll", bpll_p, SRC_CDREX, 0, 1),
MUX(0, "sclk_bpll_muxed", bpll_user_p, SRC_TOP2, 24, 1),
+ MUX(0, "sclk_epll", epll_p, SRC_TOP2, 12, 1),
+
MUX(0, "sclk_cpll", cpll_p, SRC_TOP2, 8, 1),
MUX(0, "sclk_mpll_bpll", mpll_bpll_p, SRC_TOP1, 20, 1),
@@ -219,11 +225,26 @@ static const struct samsung_gate_clock exynos5410_gate_clks[] __initconst = {
GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0),
};
-static const struct samsung_pll_clock exynos5410_plls[nr_plls] __initconst = {
+static const struct samsung_pll_rate_table exynos5410_pll2550x_24mhz_tbl[] __initconst = {
+ PLL_36XX_RATE(400000000U, 200, 3, 2, 0),
+ PLL_36XX_RATE(333000000U, 111, 2, 2, 0),
+ PLL_36XX_RATE(300000000U, 100, 2, 2, 0),
+ PLL_36XX_RATE(266000000U, 266, 3, 3, 0),
+ PLL_36XX_RATE(200000000U, 200, 3, 3, 0),
+ PLL_36XX_RATE(192000000U, 192, 3, 3, 0),
+ PLL_36XX_RATE(166000000U, 166, 3, 3, 0),
+ PLL_36XX_RATE(133000000U, 266, 3, 4, 0),
+ PLL_36XX_RATE(100000000U, 200, 3, 4, 0),
+ PLL_36XX_RATE(66000000U, 176, 2, 5, 0),
+};
+
+static struct samsung_pll_clock exynos5410_plls[nr_plls] __initdata = {
[apll] = PLL(pll_35xx, CLK_FOUT_APLL, "fout_apll", "fin_pll", APLL_LOCK,
APLL_CON0, NULL),
[cpll] = PLL(pll_35xx, CLK_FOUT_CPLL, "fout_cpll", "fin_pll", CPLL_LOCK,
CPLL_CON0, NULL),
+ [epll] = PLL(pll_2650x, CLK_FOUT_EPLL, "fout_epll", "fin_pll", EPLL_LOCK,
+ EPLL_CON0, NULL),
[mpll] = PLL(pll_35xx, CLK_FOUT_MPLL, "fout_mpll", "fin_pll", MPLL_LOCK,
MPLL_CON0, NULL),
[bpll] = PLL(pll_35xx, CLK_FOUT_BPLL, "fout_bpll", "fin_pll", BPLL_LOCK,
@@ -247,6 +268,11 @@ static const struct samsung_cmu_info cmu __initconst = {
/* register exynos5410 clocks */
static void __init exynos5410_clk_init(struct device_node *np)
{
+ struct clk *xxti = of_clk_get(np, 0);
+
+ if (!IS_ERR(xxti) && clk_get_rate(xxti) == 24 * MHZ)
+ exynos5410_plls[epll].rate_table = exynos5410_pll2550x_24mhz_tbl;
+
samsung_cmu_register_one(np, &cmu);
pr_debug("Exynos5410: clock setup completed.\n");
diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
index b5ab055957d2..9617825daabb 100644
--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
@@ -1018,6 +1018,102 @@ static const struct clk_ops samsung_pll2550xx_clk_min_ops = {
};
/*
+ * PLL2650x Clock Type
+ */
+
+/* Maximum lock time can be 3000 * PDIV cycles */
+#define PLL2650X_LOCK_FACTOR 3000
+
+#define PLL2650X_M_MASK 0x1ff
+#define PLL2650X_P_MASK 0x3f
+#define PLL2650X_S_MASK 0x7
+#define PLL2650X_K_MASK 0xffff
+#define PLL2650X_LOCK_STAT_MASK 0x1
+#define PLL2650X_M_SHIFT 16
+#define PLL2650X_P_SHIFT 8
+#define PLL2650X_S_SHIFT 0
+#define PLL2650X_K_SHIFT 0
+#define PLL2650X_LOCK_STAT_SHIFT 29
+#define PLL2650X_PLL_ENABLE_SHIFT 31
+
+static unsigned long samsung_pll2650x_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ u64 fout = parent_rate;
+ u32 mdiv, pdiv, sdiv, pll_con0, pll_con1;
+ s16 kdiv;
+
+ pll_con0 = readl_relaxed(pll->con_reg);
+ mdiv = (pll_con0 >> PLL2650X_M_SHIFT) & PLL2650X_M_MASK;
+ pdiv = (pll_con0 >> PLL2650X_P_SHIFT) & PLL2650X_P_MASK;
+ sdiv = (pll_con0 >> PLL2650X_S_SHIFT) & PLL2650X_S_MASK;
+
+ pll_con1 = readl_relaxed(pll->con_reg + 4);
+ kdiv = (s16)((pll_con1 >> PLL2650X_K_SHIFT) & PLL2650X_K_MASK);
+
+ fout *= (mdiv << 16) + kdiv;
+ do_div(fout, (pdiv << sdiv));
+ fout >>= 16;
+
+ return (unsigned long)fout;
+}
+
+static int samsung_pll2650x_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ const struct samsung_pll_rate_table *rate;
+ u32 con0, con1;
+
+ /* Get required rate settings from table */
+ rate = samsung_get_pll_settings(pll, drate);
+ if (!rate) {
+ pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
+ drate, clk_hw_get_name(hw));
+ return -EINVAL;
+ }
+
+ con0 = readl_relaxed(pll->con_reg);
+ con1 = readl_relaxed(pll->con_reg + 4);
+
+ /* Set PLL lock time. */
+ writel_relaxed(rate->pdiv * PLL2650X_LOCK_FACTOR, pll->lock_reg);
+
+ /* Change PLL PMS values */
+ con0 &= ~((PLL2650X_M_MASK << PLL2650X_M_SHIFT) |
+ (PLL2650X_P_MASK << PLL2650X_P_SHIFT) |
+ (PLL2650X_S_MASK << PLL2650X_S_SHIFT));
+ con0 |= (rate->mdiv << PLL2650X_M_SHIFT) |
+ (rate->pdiv << PLL2650X_P_SHIFT) |
+ (rate->sdiv << PLL2650X_S_SHIFT);
+ con0 |= (1 << PLL2650X_PLL_ENABLE_SHIFT);
+ writel_relaxed(con0, pll->con_reg);
+
+ con1 &= ~(PLL2650X_K_MASK << PLL2650X_K_SHIFT);
+ con1 |= ((rate->kdiv & PLL2650X_K_MASK) << PLL2650X_K_SHIFT);
+ writel_relaxed(con1, pll->con_reg + 4);
+
+ do {
+ cpu_relax();
+ con0 = readl_relaxed(pll->con_reg);
+ } while (!(con0 & (PLL2650X_LOCK_STAT_MASK
+ << PLL2650X_LOCK_STAT_SHIFT)));
+
+ return 0;
+}
+
+static const struct clk_ops samsung_pll2650x_clk_ops = {
+ .recalc_rate = samsung_pll2650x_recalc_rate,
+ .round_rate = samsung_pll_round_rate,
+ .set_rate = samsung_pll2650x_set_rate,
+};
+
+static const struct clk_ops samsung_pll2650x_clk_min_ops = {
+ .recalc_rate = samsung_pll2650x_recalc_rate,
+};
+
+/*
* PLL2650XX Clock Type
*/
@@ -1227,6 +1323,12 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
else
init.ops = &samsung_pll2550xx_clk_ops;
break;
+ case pll_2650x:
+ if (!pll->rate_table)
+ init.ops = &samsung_pll2650x_clk_min_ops;
+ else
+ init.ops = &samsung_pll2650x_clk_ops;
+ break;
case pll_2650xx:
if (!pll->rate_table)
init.ops = &samsung_pll2650xx_clk_min_ops;
diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h
index df4ad8a51050..a1ca0233cb4b 100644
--- a/drivers/clk/samsung/clk-pll.h
+++ b/drivers/clk/samsung/clk-pll.h
@@ -33,6 +33,7 @@ enum samsung_pll_type {
pll_s3c2440_mpll,
pll_2550x,
pll_2550xx,
+ pll_2650x,
pll_2650xx,
pll_1450x,
pll_1451x,