summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-01-14 09:51:25 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2018-01-14 09:51:25 -0800
commit40548c6b6c134275c750eb372dc2cf8ee1bbc3d4 (patch)
tree3bfc6943c3b43f1e345ddb7c88996e7b2f121fcd
parent2c1cfa49901839136e578ca516a7e230182da024 (diff)
parent99a9dc98ba52267ce5e062b52de88ea1f1b2a7d8 (diff)
Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 pti updates from Thomas Gleixner: "This contains: - a PTI bugfix to avoid setting reserved CR3 bits when PCID is disabled. This seems to cause issues on a virtual machine at least and is incorrect according to the AMD manual. - a PTI bugfix which disables the perf BTS facility if PTI is enabled. The BTS AUX buffer is not globally visible and causes the CPU to fault when the mapping disappears on switching CR3 to user space. A full fix which restores BTS on PTI is non trivial and will be worked on. - PTI bugfixes for EFI and trusted boot which make sure that the user space visible page table entries have the NX bit cleared - removal of dead code in the PTI pagetable setup functions - add PTI documentation - add a selftest for vsyscall to verify that the kernel actually implements what it advertises. - a sysfs interface to expose vulnerability and mitigation information so there is a coherent way for users to retrieve the status. - the initial spectre_v2 mitigations, aka retpoline: + The necessary ASM thunk and compiler support + The ASM variants of retpoline and the conversion of affected ASM code + Make LFENCE serializing on AMD so it can be used as speculation trap + The RSB fill after vmexit - initial objtool support for retpoline As I said in the status mail this is the most of the set of patches which should go into 4.15 except two straight forward patches still on hold: - the retpoline add on of LFENCE which waits for ACKs - the RSB fill after context switch Both should be ready to go early next week and with that we'll have covered the major holes of spectre_v2 and go back to normality" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) x86,perf: Disable intel_bts when PTI security/Kconfig: Correct the Documentation reference for PTI x86/pti: Fix !PCID and sanitize defines selftests/x86: Add test_vsyscall x86/retpoline: Fill return stack buffer on vmexit x86/retpoline/irq32: Convert assembler indirect jumps x86/retpoline/checksum32: Convert assembler indirect jumps x86/retpoline/xen: Convert Xen hypercall indirect jumps x86/retpoline/hyperv: Convert assembler indirect jumps x86/retpoline/ftrace: Convert ftrace assembler indirect jumps x86/retpoline/entry: Convert entry assembler indirect jumps x86/retpoline/crypto: Convert crypto assembler indirect jumps x86/spectre: Add boot time option to select Spectre v2 mitigation x86/retpoline: Add initial retpoline support objtool: Allow alternatives to be ignored objtool: Detect jumps to retpoline thunks x86/pti: Make unpoison of pgd for trusted boot work for real x86/alternatives: Fix optimize_nops() checking sysfs/cpu: Fix typos in vulnerability documentation x86/cpu/AMD: Use LFENCE_RDTSC in preference to MFENCE_RDTSC ...
-rw-r--r--Documentation/ABI/testing/sysfs-devices-system-cpu16
-rw-r--r--Documentation/admin-guide/kernel-parameters.txt49
-rw-r--r--Documentation/x86/pti.txt186
-rw-r--r--arch/x86/Kconfig14
-rw-r--r--arch/x86/Makefile10
-rw-r--r--arch/x86/crypto/aesni-intel_asm.S5
-rw-r--r--arch/x86/crypto/camellia-aesni-avx-asm_64.S3
-rw-r--r--arch/x86/crypto/camellia-aesni-avx2-asm_64.S3
-rw-r--r--arch/x86/crypto/crc32c-pcl-intel-asm_64.S3
-rw-r--r--arch/x86/entry/calling.h36
-rw-r--r--arch/x86/entry/entry_32.S5
-rw-r--r--arch/x86/entry/entry_64.S12
-rw-r--r--arch/x86/events/intel/bts.c18
-rw-r--r--arch/x86/include/asm/asm-prototypes.h25
-rw-r--r--arch/x86/include/asm/cpufeatures.h4
-rw-r--r--arch/x86/include/asm/mshyperv.h18
-rw-r--r--arch/x86/include/asm/msr-index.h3
-rw-r--r--arch/x86/include/asm/nospec-branch.h214
-rw-r--r--arch/x86/include/asm/processor-flags.h2
-rw-r--r--arch/x86/include/asm/tlbflush.h6
-rw-r--r--arch/x86/include/asm/xen/hypercall.h5
-rw-r--r--arch/x86/kernel/alternative.c7
-rw-r--r--arch/x86/kernel/cpu/amd.c28
-rw-r--r--arch/x86/kernel/cpu/bugs.c185
-rw-r--r--arch/x86/kernel/cpu/common.c3
-rw-r--r--arch/x86/kernel/ftrace_32.S6
-rw-r--r--arch/x86/kernel/ftrace_64.S8
-rw-r--r--arch/x86/kernel/irq_32.c9
-rw-r--r--arch/x86/kernel/tboot.c11
-rw-r--r--arch/x86/kvm/svm.c4
-rw-r--r--arch/x86/kvm/vmx.c4
-rw-r--r--arch/x86/lib/Makefile1
-rw-r--r--arch/x86/lib/checksum_32.S7
-rw-r--r--arch/x86/lib/retpoline.S48
-rw-r--r--arch/x86/mm/pti.c32
-rw-r--r--arch/x86/platform/efi/efi_64.c2
-rw-r--r--drivers/base/Kconfig3
-rw-r--r--drivers/base/cpu.c48
-rw-r--r--include/linux/cpu.h7
-rw-r--r--security/Kconfig2
-rw-r--r--tools/objtool/check.c69
-rw-r--r--tools/objtool/check.h2
-rw-r--r--tools/testing/selftests/x86/Makefile2
-rw-r--r--tools/testing/selftests/x86/test_vsyscall.c500
44 files changed, 1525 insertions, 100 deletions
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index d6d862db3b5d..bfd29bc8d37a 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -375,3 +375,19 @@ Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
Description: information about CPUs heterogeneity.
cpu_capacity: capacity of cpu#.
+
+What: /sys/devices/system/cpu/vulnerabilities
+ /sys/devices/system/cpu/vulnerabilities/meltdown
+ /sys/devices/system/cpu/vulnerabilities/spectre_v1
+ /sys/devices/system/cpu/vulnerabilities/spectre_v2
+Date: January 2018
+Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description: Information about CPU vulnerabilities
+
+ The files are named after the code names of CPU
+ vulnerabilities. The output of those files reflects the
+ state of the CPUs in the system. Possible output values:
+
+ "Not affected" CPU is not affected by the vulnerability
+ "Vulnerable" CPU is affected and no mitigation in effect
+ "Mitigation: $M" CPU is affected and mitigation $M is in effect
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index faccc582c0f9..46b26bfee27b 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2623,6 +2623,11 @@
nosmt [KNL,S390] Disable symmetric multithreading (SMT).
Equivalent to smt=1.
+ nospectre_v2 [X86] Disable all mitigations for the Spectre variant 2
+ (indirect branch prediction) vulnerability. System may
+ allow data leaks with this option, which is equivalent
+ to spectre_v2=off.
+
noxsave [BUGS=X86] Disables x86 extended register state save
and restore using xsave. The kernel will fallback to
enabling legacy floating-point and sse state.
@@ -2709,8 +2714,6 @@
steal time is computed, but won't influence scheduler
behaviour
- nopti [X86-64] Disable kernel page table isolation
-
nolapic [X86-32,APIC] Do not enable or use the local APIC.
nolapic_timer [X86-32,APIC] Do not use the local APIC timer.
@@ -3291,11 +3294,20 @@
pt. [PARIDE]
See Documentation/blockdev/paride.txt.
- pti= [X86_64]
- Control user/kernel address space isolation:
- on - enable
- off - disable
- auto - default setting
+ pti= [X86_64] Control Page Table Isolation of user and
+ kernel address spaces. Disabling this feature
+ removes hardening, but improves performance of
+ system calls and interrupts.
+
+ on - unconditionally enable
+ off - unconditionally disable
+ auto - kernel detects whether your CPU model is
+ vulnerable to issues that PTI mitigates
+
+ Not specifying this option is equivalent to pti=auto.
+
+ nopti [X86_64]
+ Equivalent to pti=off
pty.legacy_count=
[KNL] Number of legacy pty's. Overwrites compiled-in
@@ -3946,6 +3958,29 @@
sonypi.*= [HW] Sony Programmable I/O Control Device driver
See Documentation/laptops/sonypi.txt
+ spectre_v2= [X86] Control mitigation of Spectre variant 2
+ (indirect branch speculation) vulnerability.
+
+ on - unconditionally enable
+ off - unconditionally disable
+ auto - kernel detects whether your CPU model is
+ vulnerable
+
+ Selecting 'on' will, and 'auto' may, choose a
+ mitigation method at run time according to the
+ CPU, the available microcode, the setting of the
+ CONFIG_RETPOLINE configuration option, and the
+ compiler with which the kernel was built.
+
+ Specific mitigations can also be selected manually:
+
+ retpoline - replace indirect branches
+ retpoline,generic - google's original retpoline
+ retpoline,amd - AMD-specific minimal thunk
+
+ Not specifying this option is equivalent to
+ spectre_v2=auto.
+
spia_io_base= [HW,MTD]
spia_fio_base=
spia_pedr=
diff --git a/Documentation/x86/pti.txt b/Documentation/x86/pti.txt
new file mode 100644
index 000000000000..d11eff61fc9a
--- /dev/null
+++ b/Documentation/x86/pti.txt
@@ -0,0 +1,186 @@
+Overview
+========
+
+Page Table Isolation (pti, previously known as KAISER[1]) is a
+countermeasure against attacks on the shared user/kernel address
+space such as the "Meltdown" approach[2].
+
+To mitigate this class of attacks, we create an independent set of
+page tables for use only when running userspace applications. When
+the kernel is entered via syscalls, interrupts or exceptions, the
+page tables are switched to the full "kernel" copy. When the system
+switches back to user mode, the user copy is used again.
+
+The userspace page tables contain only a minimal amount of kernel
+data: only what is needed to enter/exit the kernel such as the
+entry/exit functions themselves and the interrupt descriptor table
+(IDT). There are a few strictly unnecessary things that get mapped
+such as the first C function when entering an interrupt (see
+comments in pti.c).
+
+This approach helps to ensure that side-channel attacks leveraging
+the paging structures do not function when PTI is enabled. It can be
+enabled by setting CONFIG_PAGE_TABLE_ISOLATION=y at compile time.
+Once enabled at compile-time, it can be disabled at boot with the
+'nopti' or 'pti=' kernel parameters (see kernel-parameters.txt).
+
+Page Table Management
+=====================
+
+When PTI is enabled, the kernel manages two sets of page tables.
+The first set is very similar to the single set which is present in
+kernels without PTI. This includes a complete mapping of userspace
+that the kernel can use for things like copy_to_user().
+
+Although _complete_, the user portion of the kernel page tables is
+crippled by setting the NX bit in the top level. This ensures
+that any missed kernel->user CR3 switch will immediately crash
+userspace upon executing its first instruction.
+
+The userspace page tables map only the kernel data needed to enter
+and exit the kernel. This data is entirely contained in the 'struct
+cpu_entry_area' structure which is placed in the fixmap which gives
+each CPU's copy of the area a compile-time-fixed virtual address.
+
+For new userspace mappings, the kernel makes the entries in its
+page tables like normal. The only difference is when the kernel
+makes entries in the top (PGD) level. In addition to setting the
+entry in the main kernel PGD, a copy of the entry is made in the
+userspace page tables' PGD.
+
+This sharing at the PGD level also inherently shares all the lower
+layers of the page tables. This leaves a single, shared set of
+userspace page tables to manage. One PTE to lock, one set of
+accessed bits, dirty bits, etc...
+
+Overhead
+========
+
+Protection against side-channel attacks is important. But,
+this protection comes at a cost:
+
+1. Increased Memory Use
+ a. Each process now needs an order-1 PGD instead of order-0.
+ (Consumes an additional 4k per process).
+ b. The 'cpu_entry_area' structure must be 2MB in size and 2MB
+ aligned so that it can be mapped by setting a single PMD
+ entry. This consumes nearly 2MB of RAM once the kernel
+ is decompressed, but no space in the kernel image itself.
+
+2. Runtime Cost
+ a. CR3 manipulation to switch between the page table copies
+ must be done at interrupt, syscall, and exception entry
+ and exit (it can be skipped when the kernel is interrupted,
+ though.) Moves to CR3 are on the order of a hundred
+ cycles, and are required at every entry and exit.
+ b. A "trampoline" must be used for SYSCALL entry. This
+ trampoline depends on a smaller set of resources than the
+ non-PTI SYSCALL entry code, so requires mapping fewer
+ things into the userspace page tables. The downside is
+ that stacks must be switched at entry time.
+ d. Global pages are disabled for all kernel structures not
+ mapped into both kernel and userspace page tables. This
+ feature of the MMU allows different processes to share TLB
+ entries mapping the kernel. Losing the feature means more
+ TLB misses after a context switch. The actual loss of
+ performance is very small, however, never exceeding 1%.
+ d. Process Context IDentifiers (PCID) is a CPU feature that
+ allows us to skip flushing the entire TLB when switching page
+ tables by setting a special bit in CR3 when the page tables
+ are changed. This makes switching the page tables (at context
+ switch, or kernel entry/exit) cheaper. But, on systems with
+ PCID support, the context switch code must flush both the user
+ and kernel entries out of the TLB. The user PCID TLB flush is
+ deferred until the exit to userspace, minimizing the cost.
+ See intel.com/sdm for the gory PCID/INVPCID details.
+ e. The userspace page tables must be populated for each new
+ process. Even without PTI, the shared kernel mappings
+ are created by copying top-level (PGD) entries into each
+ new process. But, with PTI, there are now *two* kernel
+ mappings: one in the kernel page tables that maps everything
+ and one for the entry/exit structures. At fork(), we need to
+ copy both.
+ f. In addition to the fork()-time copying, there must also
+ be an update to the userspace PGD any time a set_pgd() is done
+ on a PGD used to map userspace. This ensures that the kernel
+ and userspace copies always map the same userspace
+ memory.
+ g. On systems without PCID support, each CR3 write flushes
+ the entire TLB. That means that each syscall, interrupt
+ or exception flushes the TLB.
+ h. INVPCID is a TLB-flushing instruction which allows flushing
+ of TLB entries for non-current PCIDs. Some systems support
+ PCIDs, but do not support INVPCID. On these systems, addresses
+ can only be flushed from the TLB for the current PCID. When
+ flushing a kernel address, we need to flush all PCIDs, so a
+ single kernel address flush will require a TLB-flushing CR3
+ write upon the next use of every PCID.
+
+Possible Future Work
+====================
+1. We can be more careful about not actually writing to CR3
+ unless its value is actually changed.
+2. Allow PTI to be enabled/disabled at runtime in addition to the
+ boot-time switching.
+
+Testing
+========
+
+To test stability of PTI, the following test procedure is recommended,
+ideally doing all of these in parallel:
+
+1. Set CONFIG_DEBUG_ENTRY=y
+2. Run several copies of all of the tools/testing/selftests/x86/ tests
+ (excluding MPX and protection_keys) in a loop on multiple CPUs for
+ several minutes. These tests frequently uncover corner cases in the
+ kernel entry code. In general, old kernels might cause these tests
+ themselves to crash, but they should never crash the kernel.
+3. Run the 'perf' tool in a mode (top or record) that generates many
+ frequent performance monitoring non-maskable interrupts (see "NMI"
+ in /proc/interrupts). This exercises the NMI entry/exit code which
+ is known to trigger bugs in code paths that did not expect to be
+ interrupted, including nested NMIs. Using "-c" boosts the rate of
+ NMIs, and using two -c with separate counters encourages nested NMIs
+ and less deterministic behavior.
+
+ while true; do perf record -c 10000 -e instructions,cycles -a sleep 10; done
+
+4. Launch a KVM virtual machine.
+5. Run 32-bit binaries on systems supporting the SYSCALL instruction.
+ This has been a lightly-tested code path and needs extra scrutiny.
+
+Debugging
+=========
+
+Bugs in PTI cause a few different signatures of crashes
+that are worth noting here.
+
+ * Failures of the selftests/x86 code. Usually a bug in one of the
+ more obscure corners of entry_64.S
+ * Crashes in early boot, especially around CPU bringup. Bugs
+ in the trampoline code or mappings cause these.
+ * Crashes at the first interrupt. Caused by bugs in entry_64.S,
+ like screwing up a page table switch. Also caused by
+ incorrectly mapping the IRQ handler entry code.
+ * Crashes at the first NMI. The NMI code is separate from main
+ interrupt handlers and can have bugs that do not affect
+ normal interrupts. Also caused by incorrectly mapping NMI
+ code. NMIs that interrupt the entry code must be very
+ careful and can be the cause of crashes that show up when
+ running perf.
+ * Kernel crashes at the first exit to userspace. entry_64.S
+ bugs, or failing to map some of the exit code.
+ * Crashes at first interrupt that interrupts userspace. The paths
+ in entry_64.S that return to userspace are sometimes separate
+ from the ones that return to the kernel.
+ * Double faults: overflowing the kernel stack because of page
+ faults upon page faults. Caused by touching non-pti-mapped
+ data in the entry code, or forgetting to switch to kernel
+ CR3 before calling into C functions which are not pti-mapped.
+ * Userspace segfaults early in boot, sometimes manifesting
+ as mount(8) failing to mount the rootfs. These have
+ tended to be TLB invalidation issues. Usually invalidating
+ the wrong PCID, or otherwise missing an invalidation.
+
+1. https://gruss.cc/files/kaiser.pdf
+2. https://meltdownattack.com/meltdown.pdf
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index ff4e9cd99854..20da391b5f32 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -88,6 +88,7 @@ config X86
select GENERIC_CLOCKEVENTS_MIN_ADJUST
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
+ select GENERIC_CPU_VULNERABILITIES
select GENERIC_EARLY_IOREMAP
select GENERIC_FIND_FIRST_BIT
select GENERIC_IOMAP
@@ -428,6 +429,19 @@ config GOLDFISH
def_bool y
depends on X86_GOLDFISH
+config RETPOLINE
+ bool "Avoid speculative indirect branches in kernel"
+ default y
+ help
+ Compile kernel with the retpoline compiler options to guard against
+ kernel-to-user data leaks by avoiding speculative indirect
+ branches. Requires a compiler with -mindirect-branch=thunk-extern
+ support for full protection. The kernel may run slower.
+
+ Without compiler support, at least indirect branches in assembler
+ code are eliminated. Since this includes the syscall entry path,
+ it is not entirely pointless.
+
config INTEL_RDT
bool "Intel Resource Director Technology support"
default n
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 3e73bc255e4e..e98f8e2e3708 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -230,6 +230,16 @@ KBUILD_CFLAGS += -Wno-sign-compare
#
KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
+# Avoid indirect branches in kernel to deal with Spectre
+ifdef CONFIG_RETPOLINE
+ RETPOLINE_CFLAGS += $(call cc-option,-mindirect-branch=thunk-extern -mindirect-branch-register)
+ ifneq ($(RETPOLINE_CFLAGS),)
+ KBUILD_CFLAGS += $(RETPOLINE_CFLAGS) -DRETPOLINE
+ else
+ $(warning CONFIG_RETPOLINE=y, but not supported by the compiler. Toolchain update recommended.)
+ endif
+endif
+
archscripts: scripts_basic
$(Q)$(MAKE) $(build)=arch/x86/tools relocs
diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S
index 16627fec80b2..3d09e3aca18d 100644
--- a/arch/x86/crypto/aesni-intel_asm.S
+++ b/arch/x86/crypto/aesni-intel_asm.S
@@ -32,6 +32,7 @@
#include <linux/linkage.h>
#include <asm/inst.h>
#include <asm/frame.h>
+#include <asm/nospec-branch.h>
/*
* The following macros are used to move an (un)aligned 16 byte value to/from
@@ -2884,7 +2885,7 @@ ENTRY(aesni_xts_crypt8)
pxor INC, STATE4
movdqu IV, 0x30(OUTP)
- call *%r11
+ CALL_NOSPEC %r11
movdqu 0x00(OUTP), INC
pxor INC, STATE1
@@ -2929,7 +2930,7 @@ ENTRY(aesni_xts_crypt8)
_aesni_gf128mul_x_ble()
movups IV, (IVP)
- call *%r11
+ CALL_NOSPEC %r11
movdqu 0x40(OUTP), INC
pxor INC, STATE1
diff --git a/arch/x86/crypto/camellia-aesni-avx-asm_64.S b/arch/x86/crypto/camellia-aesni-avx-asm_64.S
index f7c495e2863c..a14af6eb09cb 100644
--- a/arch/x86/crypto/camellia-aesni-avx-asm_64.S
+++ b/arch/x86/crypto/camellia-aesni-avx-asm_64.S
@@ -17,6 +17,7 @@
#include <linux/linkage.h>
#include <asm/frame.h>
+#include <asm/nospec-branch.h>
#define CAMELLIA_TABLE_BYTE_LEN 272
@@ -1227,7 +1228,7 @@ camellia_xts_crypt_16way:
vpxor 14 * 16(%rax), %xmm15, %xmm14;
vpxor 15 * 16(%rax), %xmm15, %xmm15;
- call *%r9;
+ CALL_NOSPEC %r9;
addq $(16 * 16), %rsp;
diff --git a/arch/x86/crypto/camellia-aesni-avx2-asm_64.S b/arch/x86/crypto/camellia-aesni-avx2-asm_64.S
index eee5b3982cfd..b66bbfa62f50 100644
--- a/arch/x86/crypto/camellia-aesni-avx2-asm_64.S
+++ b/arch/x86/crypto/camellia-aesni-avx2-asm_64.S
@@ -12,6 +12,7 @@
#include <linux/linkage.h>
#include <asm/frame.h>
+#include <asm/nospec-branch.h>
#define CAMELLIA_TABLE_BYTE_LEN 272
@@ -1343,7 +1344,7 @@ camellia_xts_crypt_32way:
vpxor 14 * 32(%rax), %ymm15, %ymm14;
vpxor 15 * 32(%rax), %ymm15, %ymm15;
- call *%r9;
+ CALL_NOSPEC %r9;
addq $(16 * 32), %rsp;
diff --git a/arch/x86/crypto/crc32c-pcl-intel-asm_64.S b/arch/x86/crypto/crc32c-pcl-intel-asm_64.S
index 7a7de27c6f41..d9b734d0c8cc 100644
--- a/arch/x86/crypto/crc32c-pcl-intel-asm_64.S
+++ b/arch/x86/crypto/crc32c-pcl-intel-asm_64.S
@@ -45,6 +45,7 @@
#include <asm/inst.h>
#include <linux/linkage.h>
+#include <asm/nospec-branch.h>
## ISCSI CRC 32 Implementation with crc32 and pclmulqdq Instruction
@@ -172,7 +173,7 @@ continue_block:
movzxw (bufp, %rax, 2), len
lea crc_array(%rip), bufp
lea (bufp, len, 1), bufp
- jmp *bufp
+ JMP_NOSPEC bufp
################################################################
## 2a) PROCESS FULL BLOCKS:
diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h
index 45a63e00a6af..3f48f695d5e6 100644
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -198,8 +198,11 @@ For 32-bit we have the following conventions - kernel is built with
* PAGE_TABLE_ISOLATION PGDs are 8k. Flip bit 12 to switch between the two
* halves:
*/
-#define PTI_SWITCH_PGTABLES_MASK (1<<PAGE_SHIFT)
-#define PTI_SWITCH_MASK (PTI_SWITCH_PGTABLES_MASK|(1<<X86_CR3_PTI_SWITCH_BIT))
+#define PTI_USER_PGTABLE_BIT PAGE_SHIFT
+#define PTI_USER_PGTABLE_MASK (1 << PTI_USER_PGTABLE_BIT)
+#define PTI_USER_PCID_BIT X86_CR3_PTI_PCID_USER_BIT
+#define PTI_USER_PCID_MASK (1 << PTI_USER_PCID_BIT)
+#define PTI_USER_PGTABLE_AND_PCID_MASK (PTI_USER_PCID_MASK | PTI_USER_PGTABLE_MASK)
.macro SET_NOFLUSH_BIT reg:req
bts $X86_CR3_PCID_NOFLUSH_BIT, \reg
@@ -208,7 +211,7 @@ For 32-bit we have the following conventions - kernel is built with
.macro ADJUST_KERNEL_CR3 reg:req
ALTERNATIVE "", "SET_NOFLUSH_BIT \reg", X86_FEATURE_PCID
/* Clear PCID and "PAGE_TABLE_ISOLATION bit", point CR3 at kernel pagetables: */
- andq $(~PTI_SWITCH_MASK), \reg
+ andq $(~PTI_USER_PGTABLE_AND_PCID_MASK), \reg
.endm
.macro SWITCH_TO_KERNEL_CR3 scratch_reg:req
@@ -239,15 +242,19 @@ For 32-bit we have the following conventions - kernel is built with
/* Flush needed, clear the bit */
btr \scratch_reg, THIS_CPU_user_pcid_flush_mask
movq \scratch_reg2, \scratch_reg
- jmp .Lwrcr3_\@
+ jmp .Lwrcr3_pcid_\@
.Lnoflush_\@:
movq \scratch_reg2, \scratch_reg
SET_NOFLUSH_BIT \scratch_reg
+.Lwrcr3_pcid_\@:
+ /* Flip the ASID to the user version */
+ orq $(PTI_USER_PCID_MASK), \scratch_reg
+
.Lwrcr3_\@:
- /* Flip the PGD and ASID to the user version */
- orq $(PTI_SWITCH_MASK), \scratch_reg
+ /* Flip the PGD to the user version */
+ orq $(PTI_USER_PGTABLE_MASK), \scratch_reg
mov \scratch_reg, %cr3
.Lend_\@:
.endm
@@ -263,17 +270,12 @@ For 32-bit we have the following conventions - kernel is built with
movq %cr3, \scratch_reg
movq \scratch_reg, \save_reg
/*
- * Is the "switch mask" all zero? That means that both of
- * these are zero:
- *
- * 1. The user/kernel PCID bit, and
- * 2. The user/kernel "bit" that points CR3 to the
- * bottom half of the 8k PGD
- *
- * That indicates a kernel CR3 value, not a user CR3.
+ * Test the user pagetable bit. If set, then the user page tables
+ * are active. If clear CR3 already has the kernel page table
+ * active.
*/
- testq $(PTI_SWITCH_MASK), \scratch_reg
- jz .Ldone_\@
+ bt $PTI_USER_PGTABLE_BIT, \scratch_reg
+ jnc .Ldone_\@
ADJUST_KERNEL_CR3 \scratch_reg
movq \scratch_reg, %cr3
@@ -290,7 +292,7 @@ For 32-bit we have the following conventions - kernel is built with
* KERNEL pages can always resume with NOFLUSH as we do
* explicit flushes.
*/
- bt $X86_CR3_PTI_SWITCH_BIT, \save_reg
+ bt $PTI_USER_PGTABLE_BIT, \save_reg
jnc .Lnoflush_\@
/*
diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index ace8f321a5a1..a1f28a54f23a 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -44,6 +44,7 @@
#include <asm/asm.h>
#include <asm/smap.h>
#include <asm/frame.h>
+#include <asm/nospec-branch.h>
.section .entry.text, "ax"
@@ -290,7 +291,7 @@ ENTRY(ret_from_fork)
/* kernel thread */
1: movl %edi, %eax
- call *%ebx
+ CALL_NOSPEC %ebx
/*
* A kernel thread is allowed to return here after successfully
* calling do_execve(). Exit to userspace to complete the execve()
@@ -919,7 +920,7 @@ common_exception:
movl %ecx, %es
TRACE_IRQS_OFF
movl %esp, %eax # pt_regs pointer
- call *%edi
+ CALL_NOSPEC %edi
jmp ret_from_exception
END(common_exception)
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index f048e384ff54..4f8e1d35a97c 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -37,6 +37,7 @@
#include <asm/pgtable_types.h>
#include <asm/export.h>
#include <asm/frame.h>
+#include <asm/nospec-branch.h>
#include <linux/err.h>
#include "calling.h"
@@ -191,7 +192,7 @@ ENTRY(entry_SYSCALL_64_trampoline)
*/
pushq %rdi
movq $entry_SYSCALL_64_stage2, %rdi
- jmp *%rdi
+ JMP_NOSPEC %rdi
END(entry_SYSCALL_64_trampoline)
.popsection
@@ -270,7 +271,12 @@ entry_SYSCALL_64_fastpath:
* It might end up jumping to the slow path. If it jumps, RAX
* and all argument registers are clobbered.
*/
+#ifdef CONFIG_RETPOLINE
+ movq sys_call_table(, %rax, 8), %rax
+ call __x86_indirect_thunk_rax
+#else
call *sys_call_table(, %rax, 8)
+#endif
.Lentry_SYSCALL_64_after_fastpath_call:
movq %rax, RAX(%rsp)
@@ -442,7 +448,7 @@ ENTRY(stub_ptregs_64)
jmp entry_SYSCALL64_slow_path
1:
- jmp *%rax /* Called from C */
+ JMP_NOSPEC %rax /* Called from C */
END(stub_ptregs_64)
.macro ptregs_stub func
@@ -521,7 +527,7 @@ ENTRY(ret_from_fork)
1:
/* kernel thread */
movq %r12, %rdi
- call *%rbx
+ CALL_NOSPEC %rbx
/*
* A kernel thread is allowed to return here after successfully
* calling do_execve(). Exit to userspace to complete the execve()
diff --git a/arch/x86/events/intel/bts.c b/arch/x86/events/intel/bts.c
index 141e07b06216..24ffa1e88cf9 100644
--- a/arch/x86/events/intel/bts.c
+++ b/arch/x86/events/intel/bts.c
@@ -582,6 +582,24 @@ static __init int bts_init(void)
if (!boot_cpu_has(X86_FEATURE_DTES64) || !x86_pmu.bts)
return -ENODEV;
+ if (boot_cpu_has(X86_FEATURE_PTI)) {
+ /*
+ * BTS hardware writes through a virtual memory map we must
+ * either use the kernel physical map, or the user mapping of
+ * the AUX buffer.
+ *
+ * However, since this driver supports per-CPU and per-task inherit
+ * we cannot use the user mapping since it will not be availble
+ * if we're not running the owning process.
+ *
+ * With PTI we can't use the kernal map either, because its not
+ * there when we run userspace.
+ *
+ * For now, disable this driver when using PTI.
+ */
+ return -ENODEV;
+ }
+
bts_pmu.capabilities = PERF_PMU_CAP_AUX_NO_SG | PERF_PMU_CAP_ITRACE |
PERF_PMU_CAP_EXCLUSIVE;
bts_pmu.task_ctx_nr = perf_sw_context;
diff --git a/arch/x86/include/asm/asm-prototypes.h b/arch/x86/include/asm/asm-prototypes.h
index ff700d81e91e..0927cdc4f946 100644
--- a/arch/x86/include/asm/asm-prototypes.h
+++ b/arch/x86/include/asm/asm-prototypes.h
@@ -11,7 +11,32 @@
#include <asm/pgtable.h>
#include <asm/special_insns.h>
#include <asm/preempt.h>
+#include <asm/asm.h>
#ifndef CONFIG_X86_CMPXCHG64
extern void cmpxchg8b_emu(void);
#endif
+
+#ifdef CONFIG_RETPOLINE
+#ifdef CONFIG_X86_32
+#define INDIRECT_THUNK(reg) extern asmlinkage void __x86_indirect_thunk_e ## reg(void);
+#else
+#define INDIRECT_THUNK(reg) extern asmlinkage void __x86_indirect_thunk_r ## reg(void);
+INDIRECT_THUNK(8)
+INDIRECT_THUNK(9)
+INDIRECT_THUNK(10)
+INDIRECT_THUNK(11)
+INDIRECT_THUNK(12)
+INDIRECT_THUNK(13)
+INDIRECT_THUNK(14)
+INDIRECT_THUNK(15)
+#endif
+INDIRECT_THUNK(ax)
+INDIRECT_THUNK(bx)
+INDIRECT_THUNK(cx)
+INDIRECT_THUNK(dx)
+INDIRECT_THUNK(si)
+INDIRECT_THUNK(di)
+INDIRECT_THUNK(bp)
+INDIRECT_THUNK(sp)
+#endif /* CONFIG_RETPOLINE */
diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h
index 21ac898df2d8..f275447862f4 100644
--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -203,6 +203,8 @@
#define X86_FEATURE_PROC_FEEDBACK ( 7*32+ 9) /* AMD ProcFeedbackInterface */
#define X86_FEATURE_SME ( 7*32+10) /* AMD Secure Memory Encryption */
#define X86_FEATURE_PTI ( 7*32+11) /* Kernel Page Table Isolation enabled */
+#define X86_FEATURE_RETPOLINE ( 7*32+12) /* Generic Retpoline mitigation for Spectre variant 2 */
+#define X86_FEATURE_RETPOLINE_AMD ( 7*32+13) /* AMD Retpoline mitigation for Spectre variant 2 */
#define X86_FEATURE_INTEL_PPIN ( 7*32+14) /* Intel Processor Inventory Number */
#define X86_FEATURE_INTEL_PT ( 7*32+15) /* Intel Processor Trace */
#define X86_FEATURE_AVX512_4VNNIW ( 7*32+16) /* AVX-512 Neural Network Instructions */
@@ -342,5 +344,7 @@
#define X86_BUG_MONITOR X86_BUG(12) /* IPI required to wake up remote CPU */
#define X86_BUG_AMD_E400 X86_BUG(13) /* CPU is among the affected by Erratum 400 */
#define X86_BUG_CPU_MELTDOWN X86_BUG(14) /* CPU is affected by meltdown attack and needs kernel page table isolation */
+#define X86_BUG_SPECTRE_V1 X86_BUG(15) /* CPU is affected by Spectre variant 1 attack with conditional branches */
+#define X86_BUG_SPECTRE_V2 X86_BUG(16) /* CPU is affected by Spectre variant 2 attack with indirect branches */
#endif /* _ASM_X86_CPUFEATURES_H */
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index 5400add2885b..8bf450b13d9f 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -7,6 +7,7 @@
#include <linux/nmi.h>
#include <asm/io.h>
#include <asm/hyperv.h>
+#include <asm/nospec-branch.h>
/*
* The below CPUID leaves are present if VersionAndFeatures.HypervisorPresent
@@ -186,10 +187,11 @@ static inline u64 hv_do_hypercall(u64 control, void *input, void *output)
return U64_MAX;
__asm__ __volatile__("mov %4, %%r8\n"
- "call *%5"
+ CALL_NOSPEC
: "=a" (hv_status), ASM_CALL_CONSTRAINT,
"+c" (control), "+d" (input_address)
- : "r" (output_address), "m" (hv_hypercall_pg)
+ : "r" (output_address),
+ THUNK_TARGET(hv_hypercall_pg)
: "cc", "memory", "r8", "r9", "r10", "r11");
#else
u32 input_address_hi = upper_32_bits(input_address);
@@ -200,13 +202,13 @@ static inline u64 hv_do_hypercall(u64 control, void *input, void *output)
if (!hv_hypercall_pg)
return U64_MAX;
- __asm__ __volatile__("call *%7"
+ __asm__ __volatile__(CALL_NOSPEC
: "=A" (hv_status),
"+c" (input_address_lo), ASM_CALL_CONSTRAINT
: "A" (control),
"b" (input_address_hi),
"D"(output_address_hi), "S"(output_address_lo),
- "m" (hv_hypercall_pg)
+ THUNK_TARGET(hv_hypercall_pg)
: "cc", "memory");
#endif /* !x86_64 */
return hv_status;
@@ -227,10 +229,10 @@ static inline u64 hv_do_fast_hypercall8(u16 code, u64 input1)
#ifdef CONFIG_X86_64
{
- __asm__ __volatile__("call *%4"
+ __asm__ __volatile__(CALL_NOSPEC
: "=a" (hv_status), ASM_CALL_CONSTRAINT,
"+c" (control), "+d" (input1)
- : "m" (hv_hypercall_pg)
+ : THUNK_TARGET(hv_hypercall_pg)
: "cc", "r8", "r9", "r10", "r11");
}
#else
@@ -238,13 +240,13 @@ static inline u64 hv_do_fast_hypercall8(u16 code, u64 input1)
u32 input1_hi = upper_32_bits(input1);
u32 input1_lo = lower_32_bits(input1);
- __asm__ __volatile__ ("call *%5"
+ __asm__ __volatile__ (CALL_NOSPEC
: "=A"(hv_status),
"+c"(input1_lo),
ASM_CALL_CONSTRAINT
: "A" (control),
"b" (input1_hi),
- "m" (hv_hypercall_pg)
+ THUNK_TARGET(hv_hypercall_pg)
: "cc", "edi", "esi");
}
#endif
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 34c4922bbc3f..e7b983a35506 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -355,6 +355,9 @@
#define FAM10H_MMIO_CONF_BASE_MASK 0xfffffffULL
#define FAM10H_MMIO_CONF_BASE_SHIFT 20
#define MSR_FAM10H_NODE_ID 0xc001100c
+#define MSR_F10H_DECFG 0xc0011029
+#define MSR_F10H_DECFG_LFENCE_SERIALIZE_BIT 1
+#define MSR_F10H_DECFG_LFENCE_SERIALIZE BIT_ULL(MSR_F10H_DECFG_LFENCE_SERIALIZE_BIT)
/* K8 MSRs */
#define MSR_K8_TOP_MEM1 0xc001001a
diff --git a/arch/x86/include/asm/nospec-branch.h b/arch/x86/include/asm/nospec-branch.h
new file mode 100644
index 000000000000..402a11c803c3
--- /dev/null
+++ b/arch/x86/include/asm/nospec-branch.h
@@ -0,0 +1,214 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __NOSPEC_BRANCH_H__
+#define __NOSPEC_BRANCH_H__
+
+#include <asm/alternative.h>
+#include <asm/alternative-asm.h>
+#include <asm/cpufeatures.h>
+
+/*
+ * Fill the CPU return stack buffer.
+ *
+ * Each entry in the RSB, if used for a speculative 'ret', contains an
+ * infinite 'pause; jmp' loop to capture speculative execution.
+ *
+ * This is required in various cases for retpoline and IBRS-based
+ * mitigations for the Spectre variant 2 vulnerability. Sometimes to
+ * eliminate potentially bogus entries from the RSB, and sometimes
+ * purely to ensure that it doesn't get empty, which on some CPUs would
+ * allow predictions from other (unwanted!) sources to be used.
+ *
+ * We define a CPP macro such that it can be used from both .S files and
+ * inline assembly. It's possible to do a .macro and then include that
+ * from C via asm(".include <asm/nospec-branch.h>") but let's not go there.
+ */
+
+#define RSB_CLEAR_LOOPS 32 /* To forcibly overwrite all entries */
+#define RSB_FILL_LOOPS 16 /* To avoid underflow */
+
+/*
+ * Google experimented with loop-unrolling and this turned out to be
+ * the optimal version — two calls, each with their own speculation
+ * trap should their return address end up getting used, in a loop.
+ */
+#define __FILL_RETURN_BUFFER(reg, nr, sp) \
+ mov $(nr/2), reg; \
+771: \
+ call 772f; \
+773: /* speculation trap */ \
+ pause; \
+ jmp 773b; \
+772: \
+ call 774f; \
+775: /* speculation trap */ \
+ pause; \
+ jmp 775b; \
+774: \
+ dec reg; \
+ jnz 771b; \
+ add $(BITS_PER_LONG/8) * nr, sp;
+
+#ifdef __ASSEMBLY__
+
+/*
+ * This should be used immediately before a retpoline alternative. It tells
+ * objtool where the retpolines are so that it can make sense of the control
+ * flow by just reading the original instruction(s) and ignoring the
+ * alternatives.
+ */
+.macro ANNOTATE_NOSPEC_ALTERNATIVE
+ .Lannotate_\@:
+ .pushsection .discard.nospec
+ .long .Lannotate_\@ - .
+ .popsection
+.endm
+
+/*
+ * These are the bare retpoline primitives for indirect jmp and call.
+ * Do not use these directly; they only exist to make the ALTERNATIVE
+ * invocation below less ugly.
+ */
+.macro RETPOLINE_JMP reg:req
+ call .Ldo_rop_\@
+.Lspec_trap_\@:
+ pause
+ jmp .Lspec_trap_\@
+.Ldo_rop_\@:
+ mov \reg, (%_ASM_SP)
+ ret
+.endm
+
+/*
+ * This is a wrapper around RETPOLINE_JMP so the called function in reg
+ * returns to the instruction after the macro.
+ */
+.macro RETPOLINE_CALL reg:req
+ jmp .Ldo_call_\@
+.Ldo_retpoline_jmp_\@:
+ RETPOLINE_JMP \reg
+.Ldo_call_\@:
+ call .Ldo_retpoline_jmp_\@
+.endm
+
+/*
+ * JMP_NOSPEC and CALL_NOSPEC macros can be used instead of a simple
+ * indirect jmp/call which may be susceptible to the Spectre variant 2
+ * attack.
+ */
+.macro JMP_NOSPEC reg:req
+#ifdef CONFIG_RETPOLINE
+ ANNOTATE_NOSPEC_ALTERNATIVE
+ ALTERNATIVE_2 __stringify(jmp *\reg), \
+ __stringify(RETPOLINE_JMP \reg), X86_FEATURE_RETPOLINE, \
+ __stringify(lfence; jmp *\reg), X86_FEATURE_RETPOLINE_AMD
+#else
+ jmp *\reg
+#endif
+.endm
+
+.macro CALL_NOSPEC reg:req
+#ifdef CONFIG_RETPOLINE
+ ANNOTATE_NOSPEC_ALTERNATIVE
+ ALTERNATIVE_2 __stringify(call *\reg), \
+ __stringify(RETPOLINE_CALL \reg), X86_FEATURE_RETPOLINE,\
+ __stringify(lfence; call *\reg), X86_FEATURE_RETPOLINE_AMD
+#else
+ call *\reg
+#endif
+.endm
+
+ /*
+ * A simpler FILL_RETURN_BUFFER macro. Don't make people use the CPP
+ * monstrosity above, manually.
+ */
+.macro FILL_RETURN_BUFFER reg:req nr:req ftr:req
+#ifdef CONFIG_RETPOLINE
+ ANNOTATE_NOSPEC_ALTERNATIVE
+ ALTERNATIVE "jmp .Lskip_rsb_\@", \
+ __stringify(__FILL_RETURN_BUFFER(\reg,\nr,%_ASM_SP)) \
+ \ftr
+.Lskip_rsb_\@:
+#endif
+.endm
+
+#else /* __ASSEMBLY__ */
+
+#define ANNOTATE_NOSPEC_ALTERNATIVE \
+ "999:\n\t" \
+ ".pushsection .discard.nospec\n\t" \
+ ".long 999b - .\n\t" \
+ ".popsection\n\t"
+
+#if defined(CONFIG_X86_64) && defined(RETPOLINE)
+
+/*
+ * Since the inline asm uses the %V modifier which is only in newer GCC,
+ * the 64-bit one is dependent on RETPOLINE not CONFIG_RETPOLINE.
+ */
+# define CALL_NOSPEC \
+ ANNOTATE_NOSPEC_ALTERNATIVE \
+ ALTERNATIVE( \
+ "call *%[thunk_target]\n", \
+ "call __x86_indirect_thunk_%V[thunk_target]\n", \
+ X86_FEATURE_RETPOLINE)
+# define THUNK_TARGET(addr) [thunk_target] "r" (addr)
+
+#elif defined(CONFIG_X86_32) && defined(CONFIG_RETPOLINE)
+/*
+ * For i386 we use the original ret-equivalent retpoline, because
+ * otherwise we'll run out of registers. We don't care about CET
+ * here, anyway.
+ */
+# define CALL_NOSPEC ALTERNATIVE("call *%[thunk_target]\n", \
+ " jmp 904f;\n" \
+ " .align 16\n" \
+ "901: call 903f;\n" \
+ "902: pause;\n" \
+ " jmp 902b;\n" \
+ " .align 16\n" \
+ "903: addl $4, %%esp;\n" \
+ " pushl %[thunk_target];\n" \
+ " ret;\n" \
+ " .align 16\n" \
+ "904: call 901b;\n", \
+ X86_FEATURE_RETPOLINE)
+
+# define THUNK_TARGET(addr) [thunk_target] "rm" (addr)
+#else /* No retpoline for C / inline asm */
+# define CALL_NOSPEC "call *%[thunk_target]\n"
+# define THUNK_TARGET(addr) [thunk_target] "rm" (addr)
+#endif
+
+/* The Spectre V2 mitigation variants */
+enum spectre_v2_mitigation {
+ SPECTRE_V2_NONE,
+ SPECTRE_V2_RETPOLINE_MINIMAL,
+ SPECTRE_V2_RETPOLINE_MINIMAL_AMD,
+ SPECTRE_V2_RETPOLINE_GENERIC,
+ SPECTRE_V2_RETPOLINE_AMD,
+ SPECTRE_V2_IBRS,
+};
+
+/*
+ * On VMEXIT we must ensure that no RSB predictions learned in the guest
+ * can be followed in the host, by overwriting the RSB completely. Both
+ * retpoline and IBRS mitigations for Spectre v2 need this; only on future
+ * CPUs with IBRS_ATT *might* it be avoided.
+ */
+static inline void vmexit_fill_RSB(void)
+{
+#ifdef CONFIG_RETPOLINE
+ unsigned long loops = RSB_CLEAR_LOOPS / 2;
+
+ asm volatile (ANNOTATE_NOSPEC_ALTERNATIVE
+ ALTERNATIVE("jmp 910f",
+ __stringify(__FILL_RETURN_BUFFER(%0, RSB_CLEAR_LOOPS, %1)),
+ X86_FEATURE_RETPOLINE)
+ "910:"
+ : "=&r" (loops), ASM_CALL_CONSTRAINT
+ : "r" (loops) : "memory" );
+#endif
+}
+#endif /* __ASSEMBLY__ */
+#endif /* __NOSPEC_BRANCH_H__ */
diff --git a/arch/x86/include/asm/processor-flags.h b/arch/x86/include/asm/processor-flags.h
index 6a60fea90b9d..625a52a5594f 100644
--- a/arch/x86/include/asm/processor-flags.h
+++ b/arch/x86/include/asm/processor-flags.h
@@ -40,7 +40,7 @@
#define CR3_NOFLUSH BIT_ULL(63)
#ifdef CONFIG_PAGE_TABLE_ISOLATION
-# define X86_CR3_PTI_SWITCH_BIT 11
+# define X86_CR3_PTI_PCID_USER_BIT 11
#endif
#else
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
index 4a08dd2ab32a..d33e4a26dc7e 100644
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -81,13 +81,13 @@ static inline u16 kern_pcid(u16 asid)
* Make sure that the dynamic ASID space does not confict with the
* bit we are using to switch between user and kernel ASIDs.
*/
- BUILD_BUG_ON(TLB_NR_DYN_ASIDS >= (1 << X86_CR3_PTI_SWITCH_BIT));
+ BUILD_BUG_ON(TLB_NR_DYN_ASIDS >= (1 << X86_CR3_PTI_PCID_USER_BIT));
/*
* The ASID being passed in here should have respected the
* MAX_ASID_AVAILABLE and thus never have the switch bit set.
*/
- VM_WARN_ON_ONCE(asid & (1 << X86_CR3_PTI_SWITCH_BIT));
+ VM_WARN_ON_ONCE(asid & (1 << X86_CR3_PTI_PCID_USER_BIT));
#endif
/*
* The dynamically-assigned ASIDs that get passed in are small
@@ -112,7 +112,7 @@ static inline u16 user_pcid(u16 asid)
{
u16 ret = kern_pcid(asid);
#ifdef CONFIG_PAGE_TABLE_ISOLATION
- ret |= 1 << X86_CR3_PTI_SWITCH_BIT;
+ ret |= 1 << X86_CR3_PTI_PCID_USER_BIT;
#endif
return ret;
}
diff --git a/arch/x86/include/asm/xen/hypercall.h b/arch/x86/include/asm/xen/hypercall.h
index 7cb282e9e587..bfd882617613 100644
--- a/arch/x86/include/asm/xen/hypercall.h
+++ b/arch/x86/include/asm/xen/hypercall.h
@@ -44,6 +44,7 @@
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/smap.h>
+#include <asm/nospec-branch.h>
#include <xen/interface/xen.h>
#include <xen/interface/sched.h>
@@ -217,9 +218,9 @@ privcmd_call(unsigned call,
__HYPERCALL_5ARG(a1, a2, a3, a4, a5);
stac();
- asm volatile("call *%[call]"
+ asm volatile(CALL_NOSPEC
: __HYPERCALL_5PARAM
- : [call] "a" (&hypercall_page[call])
+ : [thunk_target] "a" (&hypercall_page[call])
: __HYPERCALL_CLOBBER5);
clac();
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index dbaf14d69ebd..4817d743c263 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -344,9 +344,12 @@ done:
static void __init_or_module noinline optimize_nops(struct alt_instr *a, u8 *instr)
{
unsigned long flags;
+ int i;
- if (instr[0] != 0x90)
- return;
+ for (i = 0; i < a->padlen; i++) {
+ if (instr[i] != 0x90)
+ return;
+ }
local_irq_save(flags);
add_nops(instr + (a->instrlen - a->padlen), a->padlen);
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index bcb75dc97d44..ea831c858195 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -829,8 +829,32 @@ static void init_amd(struct cpuinfo_x86 *c)
set_cpu_cap(c, X86_FEATURE_K8);
if (cpu_has(c, X86_FEATURE_XMM2)) {
- /* MFENCE stops RDTSC speculation */
- set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
+ unsigned long long val;
+ int ret;
+
+ /*
+ * A serializing LFENCE has less overhead than MFENCE, so
+ * use it for execution serialization. On families which
+ * don't have that MSR, LFENCE is already serializing.
+ * msr_set_bit() uses the safe accessors, too, even if the MSR
+ * is not present.
+ */
+ msr_set_bit(MSR_F10H_DECFG,
+ MSR_F10H_DECFG_LFENCE_SERIALIZE_BIT);
+
+ /*
+ * Verify that the MSR write was successful (could be running
+ * under a hypervisor) and only then assume that LFENCE is
+ * serializing.
+ */
+ ret = rdmsrl_safe(MSR_F10H_DECFG, &val);
+ if (!ret && (val & MSR_F10H_DECFG_LFENCE_SERIALIZE)) {
+ /* A serializing LFENCE stops RDTSC speculation */
+ set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
+ } else {
+ /* MFENCE stops RDTSC speculation */
+ set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
+ }
}
/*
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index ba0b2424c9b0..e4dc26185aa7 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -10,6 +10,10 @@
*/
#include <linux/init.h>
#include <linux/utsname.h>
+#include <linux/cpu.h>
+
+#include <asm/nospec-branch.h>
+#include <asm/cmdline.h>
#include <asm/bugs.h>
#include <asm/processor.h>
#include <asm/processor-flags.h>
@@ -20,6 +24,8 @@
#include <asm/pgtable.h>
#include <asm/set_memory.h>
+static void __init spectre_v2_select_mitigation(void);
+
void __init check_bugs(void)
{
identify_boot_cpu();
@@ -29,6 +35,9 @@ void __init check_bugs(void)
print_cpu_info(&boot_cpu_data);
}
+ /* Select the proper spectre mitigation before patching alternatives */
+ spectre_v2_select_mitigation();
+
#ifdef CONFIG_X86_32
/*
* Check whether we are able to run this kernel safely on SMP.
@@ -60,3 +69,179 @@ void __init check_bugs(void)
set_memory_4k((unsigned long)__va(0), 1);
#endif
}
+
+/* The kernel command line selection */
+enum spectre_v2_mitigation_cmd {
+ SPECTRE_V2_CMD_NONE,
+ SPECTRE_V2_CMD_AUTO,
+ SPECTRE_V2_CMD_FORCE,
+ SPECTRE_V2_CMD_RETPOLINE,
+ SPECTRE_V2_CMD_RETPOLINE_GENERIC,
+ SPECTRE_V2_CMD_RETPOLINE_AMD,
+};
+
+static const char *spectre_v2_strings[] = {
+ [SPECTRE_V2_NONE] = "Vulnerable",
+ [SPECTRE_V2_RETPOLINE_MINIMAL] = "Vulnerable: Minimal generic ASM retpoline",
+ [SPECTRE_V2_RETPOLINE_MINIMAL_AMD] = "Vulnerable: Minimal AMD ASM retpoline",
+ [SPECTRE_V2_RETPOLINE_GENERIC] = "Mitigation: Full generic retpoline",
+ [SPECTRE_V2_RETPOLINE_AMD] = "Mitigation: Full AMD retpoline",
+};
+
+#undef pr_fmt
+#define pr_fmt(fmt) "Spectre V2 mitigation: " fmt
+
+static enum spectre_v2_mitigation spectre_v2_enabled = SPECTRE_V2_NONE;
+
+static void __init spec2_print_if_insecure(const char *reason)
+{
+ if (boot_cpu_has_bug(X86_BUG_SPECTRE_V2))
+ pr_info("%s\n", reason);
+}
+
+static void __init spec2_print_if_secure(const char *reason)
+{
+ if (!boot_cpu_has_bug(X86_BUG_SPECTRE_V2))
+ pr_info("%s\n", reason);
+}
+
+static inline bool retp_compiler(void)
+{
+ return __is_defined(RETPOLINE);
+}
+
+static inline bool match_option(const char *arg, int arglen, const char *opt)
+{
+ int len = strlen(opt);
+
+ return len == arglen && !strncmp(arg, opt, len);
+}
+
+static enum spectre_v2_mitigation_cmd __init spectre_v2_parse_cmdline(void)
+{
+ char arg[20];
+ int ret;
+
+ ret = cmdline_find_option(boot_command_line, "spectre_v2", arg,
+ sizeof(arg));
+ if (ret > 0) {
+ if (match_option(arg, ret, "off")) {
+ goto disable;
+ } else if (match_option(arg, ret, "on")) {
+ spec2_print_if_secure("force enabled on command line.");
+ return SPECTRE_V2_CMD_FORCE;
+ } else if (match_option(arg, ret, "retpoline")) {
+ spec2_print_if_insecure("retpoline selected on command line.");
+ return SPECTRE_V2_CMD_RETPOLINE;
+ } else if (match_option(arg, ret, "retpoline,amd")) {
+ if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD) {
+ pr_err("retpoline,amd selected but CPU is not AMD. Switching to AUTO select\n");
+ return SPECTRE_V2_CMD_AUTO;
+ }
+ spec2_print_if_insecure("AMD retpoline selected on command line.");
+ return SPECTRE_V2_CMD_RETPOLINE_AMD;
+ } else if (match_option(arg, ret, "retpoline,generic")) {
+ spec2_print_if_insecure("generic retpoline selected on command line.");
+ return SPECTRE_V2_CMD_RETPOLINE_GENERIC;
+ } else if (match_option(arg, ret, "auto")) {
+ return SPECTRE_V2_CMD_AUTO;
+ }
+ }
+
+ if (!cmdline_find_option_bool(boot_command_line, "nospectre_v2"))
+ return SPECTRE_V2_CMD_AUTO;
+disable:
+ spec2_print_if_insecure("disabled on command line.");
+ return SPECTRE_V2_CMD_NONE;
+}
+
+static void __init spectre_v2_select_mitigation(void)
+{
+ enum spectre_v2_mitigation_cmd cmd = spectre_v2_parse_cmdline();
+ enum spectre_v2_mitigation mode = SPECTRE_V2_NONE;
+
+ /*
+ * If the CPU is not affected and the command line mode is NONE or AUTO
+ * then nothing to do.
+ */
+ if (!boot_cpu_has_bug(X86_BUG_SPECTRE_V2) &&
+ (cmd == SPECTRE_V2_CMD_NONE || cmd == SPECTRE_V2_CMD_AUTO))
+ return;
+
+ switch (cmd) {
+ case SPECTRE_V2_CMD_NONE:
+ return;
+
+ case SPECTRE_V2_CMD_FORCE:
+ /* FALLTRHU */
+ case SPECTRE_V2_CMD_AUTO:
+ goto retpoline_auto;
+
+ case SPECTRE_V2_CMD_RETPOLINE_AMD:
+ if (IS_ENABLED(CONFIG_RETPOLINE))
+ goto retpoline_amd;
+ break;
+ case SPECTRE_V2_CMD_RETPOLINE_GENERIC:
+ if (IS_ENABLED(CONFIG_RETPOLINE))
+ goto retpoline_generic;
+ break;
+ case SPECTRE_V2_CMD_RETPOLINE:
+ if (IS_ENABLED(CONFIG_RETPOLINE))
+ goto retpoline_auto;
+ break;
+ }
+ pr_err("kernel not compiled with retpoline; no mitigation available!");
+ return;
+
+retpoline_auto:
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
+ retpoline_amd:
+ if (!boot_cpu_has(X86_FEATURE_LFENCE_RDTSC)) {
+ pr_err("LFENCE not serializing. Switching to generic retpoline\n");
+ goto retpoline_generic;
+ }
+ mode = retp_compiler() ? SPECTRE_V2_RETPOLINE_AMD :
+ SPECTRE_V2_RETPOLINE_MINIMAL_AMD;
+ setup_force_cpu_cap(X86_FEATURE_RETPOLINE_AMD);
+ setup_force_cpu_cap(X86_FEATURE_RETPOLINE);
+ } else {
+ retpoline_generic:
+ mode = retp_compiler() ? SPECTRE_V2_RETPOLINE_GENERIC :
+ SPECTRE_V2_RETPOLINE_MINIMAL;
+ setup_force_cpu_cap(X86_FEATURE_RETPOLINE);
+ }
+
+ spectre_v2_enabled = mode;
+ pr_info("%s\n", spectre_v2_strings[mode]);
+}
+
+#undef pr_fmt
+
+#ifdef CONFIG_SYSFS
+ssize_t cpu_show_meltdown(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ if (!boot_cpu_has_bug(X86_BUG_CPU_MELTDOWN))
+ return sprintf(buf, "Not affected\n");
+ if (boot_cpu_has(X86_FEATURE_PTI))
+ return sprintf(buf, "Mitigation: PTI\n");
+ return sprintf(buf, "Vulnerable\n");
+}
+
+ssize_t cpu_show_spectre_v1(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ if (!boot_cpu_has_bug(X86_BUG_SPECTRE_V1))
+ return sprintf(buf, "Not affected\n");
+ return sprintf(buf, "Vulnerable\n");
+}
+
+ssize_t cpu_show_spectre_v2(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ if (!boot_cpu_has_bug(X86_BUG_SPECTRE_V2))
+ return sprintf(buf, "Not affected\n");
+
+ return sprintf(buf, "%s\n", spectre_v2_strings[spectre_v2_enabled]);
+}
+#endif
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 39d7ea865207..ef29ad001991 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -926,6 +926,9 @@ static void __init early_identify_cpu(struct cpuinfo_x86 *c)
if (c->x86_vendor != X86_VENDOR_AMD)
setup_force_cpu_bug(X86_BUG_CPU_MELTDOWN);
+ setup_force_cpu_bug(X86_BUG_SPECTRE_V1);
+ setup_force_cpu_bug(X86_BUG_SPECTRE_V2);
+
fpu__init_system(c);
#ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/ftrace_32.S b/arch/x86/kernel/ftrace_32.S
index b6c6468e10bc..4c8440de3355 100644
--- a/arch/x86/kernel/ftrace_32.S
+++ b/arch/x86/kernel/ftrace_32.S
@@ -8,6 +8,7 @@
#include <asm/segment.h>
#include <asm/export.h>
#include <asm/ftrace.h>
+#include <asm/nospec-branch.h>
#ifdef CC_USING_FENTRY
# define function_hook __fentry__
@@ -197,7 +198,8 @@ ftrace_stub:
movl 0x4(%ebp), %edx
subl $MCOUNT_INSN_SIZE, %eax
- call *ftrace_trace_function
+ movl ftrace_trace_function, %ecx
+ CALL_NOSPEC %ecx
popl %edx
popl %ecx
@@ -241,5 +243,5 @@ return_to_handler:
movl %eax, %ecx
popl %edx
popl %eax
- jmp *%ecx
+ JMP_NOSPEC %ecx
#endif
diff --git a/arch/x86/kernel/ftrace_64.S b/arch/x86/kernel/ftrace_64.S
index c832291d948a..7cb8ba08beb9 100644
--- a/arch/x86/kernel/ftrace_64.S
+++ b/arch/x86/kernel/ftrace_64.S
@@ -7,7 +7,7 @@
#include <asm/ptrace.h>
#include <asm/ftrace.h>
#include <asm/export.h>
-
+#include <asm/nospec-branch.h>
.code64
.section .entry.text, "ax"
@@ -286,8 +286,8 @@ trace:
* ip and parent ip are used and the list function is called when
* function tracing is enabled.
*/
- call *ftrace_trace_function
-
+ movq ftrace_trace_function, %r8
+ CALL_NOSPEC %r8
restore_mcount_regs
jmp fgraph_trace
@@ -329,5 +329,5 @@ GLOBAL(return_to_handler)
movq 8(%rsp), %rdx
movq (%rsp), %rax
addq $24, %rsp
- jmp *%rdi
+ JMP_NOSPEC %rdi
#endif
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index a83b3346a0e1..c1bdbd3d3232 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -20,6 +20,7 @@
#include <linux/mm.h>
#include <asm/apic.h>
+#include <asm/nospec-branch.h>
#ifdef CONFIG_DEBUG_STACKOVERFLOW
@@ -55,11 +56,11 @@ DEFINE_PER_CPU(struct irq_stack *, softirq_stack);
static void call_on_stack(void *func, void *stack)
{
asm volatile("xchgl %%ebx,%%esp \n"
- "call *%%edi \n"
+ CALL_NOSPEC
"movl %%ebx,%%esp \n"
: "=b" (stack)
: "0" (stack),
- "D"(func)
+ [thunk_target] "D"(func)
: "memory", "cc", "edx", "ecx", "eax");
}
@@ -95,11 +96,11 @@ static inline int execute_on_irq_stack(int overflow, struct irq_desc *desc)
call_on_stack(print_stack_overflow, isp);
asm volatile("xchgl %%ebx,%%esp \n"
- "call *%%edi \n"
+ CALL_NOSPEC
"movl %%ebx,%%esp \n"
: "=a" (arg1), "=b" (isp)
: "0" (desc), "1" (isp),
- "D" (desc->handle_irq)
+ [thunk_target] "D" (desc->handle_irq)
: "memory", "cc", "ecx");
return 1;
}
diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c
index a4eb27918ceb..a2486f444073 100644
--- a/arch/x86/kernel/tboot.c
+++ b/arch/x86/kernel/tboot.c
@@ -138,6 +138,17 @@ static int map_tboot_page(unsigned long vaddr, unsigned long pfn,
return -1;
set_pte_at(&tboot_mm, vaddr, pte, pfn_pte(pfn, prot));
pte_unmap(pte);
+
+ /*
+ * PTI poisons low addresses in the kernel page tables in the
+ * name of making them unusable for userspace. To execute
+ * code at such a low address, the poison must be cleared.
+ *
+ * Note: 'pgd' actually gets set in p4d_alloc() _or_
+ * pud_alloc() depending on 4/5-level paging.
+ */
+ pgd->pgd &= ~_PAGE_NX;
+
return 0;
}
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 3158dac87f82..f40d0da1f1d3 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -45,6 +45,7 @@
#include <asm/debugreg.h>
#include <asm/kvm_para.h>
#include <asm/irq_remapping.h>
+#include <asm/nospec-branch.h>
#include <asm/virtext.h>
#include "trace.h"
@@ -5027,6 +5028,9 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
#endif
);
+ /* Eliminate branch target predictions from guest mode */
+ vmexit_fill_RSB();
+
#ifdef CONFIG_X86_64
wrmsrl(MSR_GS_BASE, svm->host.gs_base);
#else
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 3f89f6783aa5..c829d89e2e63 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -50,6 +50,7 @@
#include <asm/apic.h>
#include <asm/irq_remapping.h>
#include <asm/mmu_context.h>
+#include <asm/nospec-branch.h>
#include "trace.h"
#include "pmu.h"
@@ -9490,6 +9491,9 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
#endif
);
+ /* Eliminate branch target predictions from guest mode */
+ vmexit_fill_RSB();
+
/* MSR_IA32_DEBUGCTLMSR is zeroed on vmexit. Restore it if needed */
if (debugctlmsr)
update_debugctlmsr(debugctlmsr);
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 7b181b61170e..f23934bbaf4e 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -26,6 +26,7 @@ lib-y += memcpy_$(BITS).o
lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem.o
lib-$(CONFIG_INSTRUCTION_DECODER) += insn.o inat.o insn-eval.o
lib-$(CONFIG_RANDOMIZE_BASE) += kaslr.o
+lib-$(CONFIG_RETPOLINE) += retpoline.o
obj-y += msr.o msr-reg.o msr-reg-export.o hweight.o
diff --git a/arch/x86/lib/checksum_32.S b/arch/x86/lib/checksum_32.S
index 4d34bb548b41..46e71a74e612 100644
--- a/arch/x86/lib/checksum_32.S
+++ b/arch/x86/lib/checksum_32.S
@@ -29,7 +29,8 @@
#include <asm/errno.h>
#include <asm/asm.h>
#include <asm/export.h>
-
+#include <asm/nospec-branch.h>
+
/*
* computes a partial checksum, e.g. for TCP/UDP fragments
*/
@@ -156,7 +157,7 @@ ENTRY(csum_partial)
negl %ebx
lea 45f(%ebx,%ebx,2), %ebx
testl %esi, %esi
- jmp *%ebx
+ JMP_NOSPEC %ebx
# Handle 2-byte-aligned regions
20: addw (%esi), %ax
@@ -439,7 +440,7 @@ ENTRY(csum_partial_copy_generic)
andl $-32,%edx
lea 3f(%ebx,%ebx), %ebx
testl %esi, %esi
- jmp *%ebx
+ JMP_NOSPEC %ebx
1: addl $64,%esi
addl $64,%edi
SRC(movb -32(%edx),%bl) ; SRC(movb (%edx),%bl)
diff --git a/arch/x86/lib/retpoline.S b/arch/x86/lib/retpoline.S
new file mode 100644
index 000000000000..cb45c6cb465f
--- /dev/null
+++ b/arch/x86/lib/retpoline.S
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#include <linux/stringify.h>
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+#include <asm/cpufeatures.h>
+#include <asm/alternative-asm.h>
+#include <asm/export.h>
+#include <asm/nospec-branch.h>
+
+.macro THUNK reg
+ .section .text.__x86.indirect_thunk.\reg
+
+ENTRY(__x86_indirect_thunk_\reg)
+ CFI_STARTPROC
+ JMP_NOSPEC %\reg
+ CFI_ENDPROC
+ENDPROC(__x86_indirect_thunk_\reg)
+.endm
+
+/*
+ * Despite being an assembler file we can't just use .irp here
+ * because __KSYM_DEPS__ only uses the C preprocessor and would
+ * only see one instance of "__x86_indirect_thunk_\reg" rather
+ * than one per register with the correct names. So we do it
+ * the simple and nasty way...
+ */
+#define EXPORT_THUNK(reg) EXPORT_SYMBOL(__x86_indirect_thunk_ ## reg)
+#define GENERATE_THUNK(reg) THUNK reg ; EXPORT_THUNK(reg)
+
+GENERATE_THUNK(_ASM_AX)
+GENERATE_THUNK(_ASM_BX)
+GENERATE_THUNK(_ASM_CX)
+GENERATE_THUNK(_ASM_DX)
+GENERATE_THUNK(_ASM_SI)
+GENERATE_THUNK(_ASM_DI)
+GENERATE_THUNK(_ASM_BP)
+GENERATE_THUNK(_ASM_SP)
+#ifdef CONFIG_64BIT
+GENERATE_THUNK(r8)
+GENERATE_THUNK(r9)
+GENERATE_THUNK(r10)
+GENERATE_THUNK(r11)
+GENERATE_THUNK(r12)
+GENERATE_THUNK(r13)
+GENERATE_THUNK(r14)
+GENERATE_THUNK(r15)
+#endif
diff --git a/arch/x86/mm/pti.c b/arch/x86/mm/pti.c
index 43d4a4a29037..ce38f165489b 100644
--- a/arch/x86/mm/pti.c
+++ b/arch/x86/mm/pti.c
@@ -149,7 +149,7 @@ pgd_t __pti_set_user_pgd(pgd_t *pgdp, pgd_t pgd)
*
* Returns a pointer to a P4D on success, or NULL on failure.
*/
-static p4d_t *pti_user_pagetable_walk_p4d(unsigned long address)
+static __init p4d_t *pti_user_pagetable_walk_p4d(unsigned long address)
{
pgd_t *pgd = kernel_to_user_pgdp(pgd_offset_k(address));
gfp_t gfp = (GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO);
@@ -164,12 +164,7 @@ static p4d_t *pti_user_pagetable_walk_p4d(unsigned long address)
if (!new_p4d_page)
return NULL;
- if (pgd_none(*pgd)) {
- set_pgd(pgd, __pgd(_KERNPG_TABLE | __pa(new_p4d_page)));
- new_p4d_page = 0;
- }
- if (new_p4d_page)
- free_page(new_p4d_page);
+ set_pgd(pgd, __pgd(_KERNPG_TABLE | __pa(new_p4d_page)));
}
BUILD_BUG_ON(pgd_large(*pgd) != 0);
@@ -182,7 +177,7 @@ static p4d_t *pti_user_pagetable_walk_p4d(unsigned long address)
*
* Returns a pointer to a PMD on success, or NULL on failure.
*/
-static pmd_t *pti_user_pagetable_walk_pmd(unsigned long address)
+static __init pmd_t *pti_user_pagetable_walk_pmd(unsigned long address)
{
gfp_t gfp = (GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO);
p4d_t *p4d = pti_user_pagetable_walk_p4d(address);
@@ -194,12 +189,7 @@ static pmd_t *pti_user_pagetable_walk_pmd(unsigned long address)
if (!new_pud_page)
return NULL;
- if (p4d_none(*p4d)) {
- set_p4d(p4d, __p4d(_KERNPG_TABLE | __pa(new_pud_page)));
- new_pud_page = 0;
- }
- if (new_pud_page)
- free_page(new_pud_page);
+ set_p4d(p4d, __p4d(_KERNPG_TABLE | __pa(new_pud_page)));
}
pud = pud_offset(p4d, address);
@@ -213,12 +203,7 @@ static pmd_t *pti_user_pagetable_walk_pmd(unsigned long address)
if (!new_pmd_page)
return NULL;
- if (pud_none(*pud)) {
- set_pud(pud, __pud(_KERNPG_TABLE | __pa(new_pmd_page)));
- new_pmd_page = 0;
- }
- if (new_pmd_page)
- free_page(new_pmd_page);
+ set_pud(pud, __pud(_KERNPG_TABLE | __pa(new_pmd_page)));
}
return pmd_offset(pud, address);
@@ -251,12 +236,7 @@ static __init pte_t *pti_user_pagetable_walk_pte(unsigned long address)
if (!new_pte_page)
return NULL;
- if (pmd_none(*pmd)) {
- set_pmd(pmd, __pmd(_KERNPG_TABLE | __pa(new_pte_page)));
- new_pte_page = 0;
- }
- if (new_pte_page)
- free_page(new_pte_page);
+ set_pmd(pmd, __pmd(_KERNPG_TABLE | __pa(new_pte_page)));
}
pte = pte_offset_kernel(pmd, address);
diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c
index d87ac96e37ed..2dd15e967c3f 100644
--- a/arch/x86/platform/efi/efi_64.c
+++ b/arch/x86/platform/efi/efi_64.c
@@ -135,7 +135,9 @@ pgd_t * __init efi_call_phys_prolog(void)
pud[j] = *pud_offset(p4d_k, vaddr);
}
}
+ pgd_offset_k(pgd * PGDIR_SIZE)->pgd &= ~_PAGE_NX;
}
+
out:
__flush_tlb_all();
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index bdc87907d6a1..2415ad9f6dd4 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -236,6 +236,9 @@ config GENERIC_CPU_DEVICES
config GENERIC_CPU_AUTOPROBE
bool
+config GENERIC_CPU_VULNERABILITIES
+ bool
+
config SOC_BUS
bool
select GLOB
diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c
index 58a9b608d821..d99038487a0d 100644
--- a/drivers/base/cpu.c
+++ b/drivers/base/cpu.c
@@ -511,10 +511,58 @@ static void __init cpu_dev_register_generic(void)
#endif
}
+#ifdef CONFIG_GENERIC_CPU_VULNERABILITIES
+
+ssize_t __weak cpu_show_meltdown(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "Not affected\n");
+}
+
+ssize_t __weak cpu_show_spectre_v1(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "Not affected\n");
+}
+
+ssize_t __weak cpu_show_spectre_v2(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "Not affected\n");
+}
+
+static DEVICE_ATTR(meltdown, 0444, cpu_show_meltdown, NULL);
+static DEVICE_ATTR(spectre_v1, 0444, cpu_show_spectre_v1, NULL);
+static DEVICE_ATTR(spectre_v2, 0444, cpu_show_spectre_v2, NULL);
+
+static struct attribute *cpu_root_vulnerabilities_attrs[] = {
+ &dev_attr_meltdown.attr,
+ &dev_attr_spectre_v1.attr,
+ &dev_attr_spectre_v2.attr,
+ NULL
+};
+
+static const struct attribute_group cpu_root_vulnerabilities_group = {
+ .name = "vulnerabilities",
+ .attrs = cpu_root_vulnerabilities_attrs,
+};
+
+static void __init cpu_register_vulnerabilities(void)
+{
+ if (sysfs_create_group(&cpu_subsys.dev_root->kobj,
+ &cpu_root_vulnerabilities_group))
+ pr_err("Unable to register CPU vulnerabilities\n");
+}
+
+#else
+static inline void cpu_register_vulnerabilities(void) { }
+#endif
+
void __init cpu_dev_init(void)
{
if (subsys_system_register(&cpu_subsys, cpu_root_attr_groups))
panic("Failed to register CPU subsystem");
cpu_dev_register_generic();
+ cpu_register_vulnerabilities();
}
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index a04ef7c15c6a..7b01bc11c692 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -47,6 +47,13 @@ extern void cpu_remove_dev_attr(struct device_attribute *attr);
extern int cpu_add_dev_attr_group(struct attribute_group *attrs);
extern void cpu_remove_dev_attr_group(struct attribute_group *attrs);
+extern ssize_t cpu_show_meltdown(struct device *dev,
+ struct device_attribute *attr, char *buf);
+extern ssize_t cpu_show_spectre_v1(struct device *dev,
+ struct device_attribute *attr, char *buf);
+extern ssize_t cpu_show_spectre_v2(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
extern __printf(4, 5)
struct device *cpu_device_create(struct device *parent, void *drvdata,
const struct attribute_group **groups,
diff --git a/security/Kconfig b/security/Kconfig
index 3d4debd0257e..b0cb9a5f9448 100644
--- a/security/Kconfig
+++ b/security/Kconfig
@@ -63,7 +63,7 @@ config PAGE_TABLE_ISOLATION
ensuring that the majority of kernel addresses are not mapped
into userspace.
- See Documentation/x86/pagetable-isolation.txt for more details.
+ See Documentation/x86/pti.txt for more details.
config SECURITY_INFINIBAND
bool "Infiniband Security Hooks"
diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index 9b341584eb1b..f40d46e24bcc 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -428,6 +428,40 @@ static void add_ignores(struct objtool_file *file)
}
/*
+ * FIXME: For now, just ignore any alternatives which add retpolines. This is
+ * a temporary hack, as it doesn't allow ORC to unwind from inside a retpoline.
+ * But it at least allows objtool to understand the control flow *around* the
+ * retpoline.
+ */
+static int add_nospec_ignores(struct objtool_file *file)
+{
+ struct section *sec;
+ struct rela *rela;
+ struct instruction *insn;
+
+ sec = find_section_by_name(file->elf, ".rela.discard.nospec");
+ if (!sec)
+ return 0;
+
+ list_for_each_entry(rela, &sec->rela_list, list) {
+ if (rela->sym->type != STT_SECTION) {
+ WARN("unexpected relocation symbol type in %s", sec->name);
+ return -1;
+ }
+
+ insn = find_insn(file, rela->sym->sec, rela->addend);
+ if (!insn) {
+ WARN("bad .discard.nospec entry");
+ return -1;
+ }
+
+ insn->ignore_alts = true;
+ }
+
+ return 0;
+}
+
+/*
* Find the destination instructions for all jumps.
*/
static int add_jump_destinations(struct objtool_file *file)
@@ -456,6 +490,13 @@ static int add_jump_destinations(struct objtool_file *file)
} else if (rela->sym->sec->idx) {
dest_sec = rela->sym->sec;
dest_off = rela->sym->sym.st_value + rela->addend + 4;
+ } else if (strstr(rela->sym->name, "_indirect_thunk_")) {
+ /*
+ * Retpoline jumps are really dynamic jumps in
+ * disguise, so convert them accordingly.
+ */
+ insn->type = INSN_JUMP_DYNAMIC;
+ continue;
} else {
/* sibling call */
insn->jump_dest = 0;
@@ -502,11 +543,18 @@ static int add_call_destinations(struct objtool_file *file)
dest_off = insn->offset + insn->len + insn->immediate;
insn->call_dest = find_symbol_by_offset(insn->sec,
dest_off);
+ /*
+ * FIXME: Thanks to retpolines, it's now considered
+ * normal for a function to call within itself. So
+ * disable this warning for now.
+ */
+#if 0
if (!insn->call_dest) {
WARN_FUNC("can't find call dest symbol at offset 0x%lx",
insn->sec, insn->offset, dest_off);
return -1;
}
+#endif
} else if (rela->sym->type == STT_SECTION) {
insn->call_dest = find_symbol_by_offset(rela->sym->sec,
rela->addend+4);
@@ -671,12 +719,6 @@ static int add_special_section_alts(struct objtool_file *file)
return ret;
list_for_each_entry_safe(special_alt, tmp, &special_alts, list) {
- alt = malloc(sizeof(*alt));
- if (!alt) {
- WARN("malloc failed");
- ret = -1;
- goto out;
- }
orig_insn = find_insn(file, special_alt->orig_sec,
special_alt->orig_off);
@@ -687,6 +729,10 @@ static int add_special_section_alts(struct objtool_file *file)
goto out;
}
+ /* Ignore retpoline alternatives. */
+ if (orig_insn->ignore_alts)
+ continue;
+
new_insn = NULL;
if (!special_alt->group || special_alt->new_len) {
new_insn = find_insn(file, special_alt->new_sec,
@@ -712,6 +758,13 @@ static int add_special_section_alts(struct objtool_file *file)
goto out;
}
+ alt = malloc(sizeof(*alt));
+ if (!alt) {
+ WARN("malloc failed");
+ ret = -1;
+ goto out;
+ }
+
alt->insn = new_insn;
list_add_tail(&alt->list, &orig_insn->alts);
@@ -1028,6 +1081,10 @@ static int decode_sections(struct objtool_file *file)
add_ignores(file);
+ ret = add_nospec_ignores(file);
+ if (ret)
+ return ret;
+
ret = add_jump_destinations(file);
if (ret)
return ret;
diff --git a/tools/objtool/check.h b/tools/objtool/check.h
index 47d9ea70a83d..dbadb304a410 100644
--- a/tools/objtool/check.h
+++ b/tools/objtool/check.h
@@ -44,7 +44,7 @@ struct instruction {
unsigned int len;
unsigned char type;
unsigned long immediate;
- bool alt_group, visited, dead_end, ignore, hint, save, restore;
+ bool alt_group, visited, dead_end, ignore, hint, save, restore, ignore_alts;
struct symbol *call_dest;
struct instruction *jump_dest;
struct list_head alts;
diff --git a/tools/testing/selftests/x86/Makefile b/tools/testing/selftests/x86/Makefile
index 939a337128db..5d4f10ac2af2 100644
--- a/tools/testing/selftests/x86/Makefile
+++ b/tools/testing/selftests/x86/Makefile
@@ -7,7 +7,7 @@ include ../lib.mk
TARGETS_C_BOTHBITS := single_step_syscall sysret_ss_attrs syscall_nt ptrace_syscall test_mremap_vdso \
check_initial_reg_state sigreturn ldt_gdt iopl mpx-mini-test ioperm \
- protection_keys test_vdso
+ protection_keys test_vdso test_vsyscall
TARGETS_C_32BIT_ONLY := entry_from_vm86 syscall_arg_fault test_syscall_vdso unwind_vdso \
test_FCMOV test_FCOMI test_FISTTP \
vdso_restorer
diff --git a/tools/testing/selftests/x86/test_vsyscall.c b/tools/testing/selftests/x86/test_vsyscall.c
new file mode 100644
index 000000000000..7a744fa7b786
--- /dev/null
+++ b/tools/testing/selftests/x86/test_vsyscall.c
@@ -0,0 +1,500 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#define _GNU_SOURCE
+
+#include <stdio.h>
+#include <sys/time.h>
+#include <time.h>
+#include <stdlib.h>
+#include <sys/syscall.h>
+#include <unistd.h>
+#include <dlfcn.h>
+#include <string.h>
+#include <inttypes.h>
+#include <signal.h>
+#include <sys/ucontext.h>
+#include <errno.h>
+#include <err.h>
+#include <sched.h>
+#include <stdbool.h>
+#include <setjmp.h>
+
+#ifdef __x86_64__
+# define VSYS(x) (x)
+#else
+# define VSYS(x) 0
+#endif
+
+#ifndef SYS_getcpu
+# ifdef __x86_64__
+# define SYS_getcpu 309
+# else
+# define SYS_getcpu 318
+# endif
+#endif
+
+static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *),
+ int flags)
+{
+ struct sigaction sa;
+ memset(&sa, 0, sizeof(sa));
+ sa.sa_sigaction = handler;
+ sa.sa_flags = SA_SIGINFO | flags;
+ sigemptyset(&sa.sa_mask);
+ if (sigaction(sig, &sa, 0))
+ err(1, "sigaction");
+}
+
+/* vsyscalls and vDSO */
+bool should_read_vsyscall = false;
+
+typedef long (*gtod_t)(struct timeval *tv, struct timezone *tz);
+gtod_t vgtod = (gtod_t)VSYS(0xffffffffff600000);
+gtod_t vdso_gtod;
+
+typedef int (*vgettime_t)(clockid_t, struct timespec *);
+vgettime_t vdso_gettime;
+
+typedef long (*time_func_t)(time_t *t);
+time_func_t vtime = (time_func_t)VSYS(0xffffffffff600400);
+time_func_t vdso_time;
+
+typedef long (*getcpu_t)(unsigned *, unsigned *, void *);
+getcpu_t vgetcpu = (getcpu_t)VSYS(0xffffffffff600800);
+getcpu_t vdso_getcpu;
+
+static void init_vdso(void)
+{
+ void *vdso = dlopen("linux-vdso.so.1", RTLD_LAZY | RTLD_LOCAL | RTLD_NOLOAD);
+ if (!vdso)
+ vdso = dlopen("linux-gate.so.1", RTLD_LAZY | RTLD_LOCAL | RTLD_NOLOAD);
+ if (!vdso) {
+ printf("[WARN]\tfailed to find vDSO\n");
+ return;
+ }
+
+ vdso_gtod = (gtod_t)dlsym(vdso, "__vdso_gettimeofday");
+ if (!vdso_gtod)
+ printf("[WARN]\tfailed to find gettimeofday in vDSO\n");
+
+ vdso_gettime = (vgettime_t)dlsym(vdso, "__vdso_clock_gettime");
+ if (!vdso_gettime)
+ printf("[WARN]\tfailed to find clock_gettime in vDSO\n");
+
+ vdso_time = (time_func_t)dlsym(vdso, "__vdso_time");
+ if (!vdso_time)
+ printf("[WARN]\tfailed to find time in vDSO\n");
+
+ vdso_getcpu = (getcpu_t)dlsym(vdso, "__vdso_getcpu");
+ if (!vdso_getcpu) {
+ /* getcpu() was never wired up in the 32-bit vDSO. */
+ printf("[%s]\tfailed to find getcpu in vDSO\n",
+ sizeof(long) == 8 ? "WARN" : "NOTE");
+ }
+}
+
+static int init_vsys(void)
+{
+#ifdef __x86_64__
+ int nerrs = 0;
+ FILE *maps;
+ char line[128];
+ bool found = false;
+
+ maps = fopen("/proc/self/maps", "r");
+ if (!maps) {
+ printf("[WARN]\tCould not open /proc/self/maps -- assuming vsyscall is r-x\n");
+ should_read_vsyscall = true;
+ return 0;
+ }
+
+ while (fgets(line, sizeof(line), maps)) {
+ char r, x;
+ void *start, *end;
+ char name[128];
+ if (sscanf(line, "%p-%p %c-%cp %*x %*x:%*x %*u %s",
+ &start, &end, &r, &x, name) != 5)
+ continue;
+
+ if (strcmp(name, "[vsyscall]"))
+ continue;
+
+ printf("\tvsyscall map: %s", line);
+
+ if (start != (void *)0xffffffffff600000 ||
+ end != (void *)0xffffffffff601000) {
+ printf("[FAIL]\taddress range is nonsense\n");
+ nerrs++;
+ }
+
+ printf("\tvsyscall permissions are %c-%c\n", r, x);
+ should_read_vsyscall = (r == 'r');
+ if (x != 'x') {
+ vgtod = NULL;
+ vtime = NULL;
+ vgetcpu = NULL;
+ }
+
+ found = true;
+ break;
+ }
+
+ fclose(maps);
+
+ if (!found) {
+ printf("\tno vsyscall map in /proc/self/maps\n");
+ should_read_vsyscall = false;
+ vgtod = NULL;
+ vtime = NULL;
+ vgetcpu = NULL;
+ }
+
+ return nerrs;
+#else
+ return 0;
+#endif
+}
+
+/* syscalls */
+static inline long sys_gtod(struct timeval *tv, struct timezone *tz)
+{
+ return syscall(SYS_gettimeofday, tv, tz);
+}
+
+static inline int sys_clock_gettime(clockid_t id, struct timespec *ts)
+{
+ return syscall(SYS_clock_gettime, id, ts);
+}
+
+static inline long sys_time(time_t *t)
+{
+ return syscall(SYS_time, t);
+}
+
+static inline long sys_getcpu(unsigned * cpu, unsigned * node,
+ void* cache)
+{
+ return syscall(SYS_getcpu, cpu, node, cache);
+}
+
+static jmp_buf jmpbuf;
+
+static void sigsegv(int sig, siginfo_t *info, void *ctx_void)
+{
+ siglongjmp(jmpbuf, 1);
+}
+
+static double tv_diff(const struct timeval *a, const struct timeval *b)
+{
+ return (double)(a->tv_sec - b->tv_sec) +
+ (double)((int)a->tv_usec - (int)b->tv_usec) * 1e-6;
+}
+
+static int check_gtod(const struct timeval *tv_sys1,
+ const struct timeval *tv_sys2,
+ const struct timezone *tz_sys,
+ const char *which,
+ const struct timeval *tv_other,
+ const struct timezone *tz_other)
+{
+ int nerrs = 0;
+ double d1, d2;
+
+ if (tz_other && (tz_sys->tz_minuteswest != tz_other->tz_minuteswest || tz_sys->tz_dsttime != tz_other->tz_dsttime)) {
+ printf("[FAIL] %s tz mismatch\n", which);
+ nerrs++;
+ }
+
+ d1 = tv_diff(tv_other, tv_sys1);
+ d2 = tv_diff(tv_sys2, tv_other);
+ printf("\t%s time offsets: %lf %lf\n", which, d1, d2);
+
+ if (d1 < 0 || d2 < 0) {
+ printf("[FAIL]\t%s time was inconsistent with the syscall\n", which);
+ nerrs++;
+ } else {
+ printf("[OK]\t%s gettimeofday()'s timeval was okay\n", which);
+ }
+
+ return nerrs;
+}
+
+static int test_gtod(void)
+{
+ struct timeval tv_sys1, tv_sys2, tv_vdso, tv_vsys;
+ struct timezone tz_sys, tz_vdso, tz_vsys;
+ long ret_vdso = -1;
+ long ret_vsys = -1;
+ int nerrs = 0;
+
+ printf("[RUN]\ttest gettimeofday()\n");
+
+ if (sys_gtod(&tv_sys1, &tz_sys) != 0)
+ err(1, "syscall gettimeofday");
+ if (vdso_gtod)
+ ret_vdso = vdso_gtod(&tv_vdso, &tz_vdso);
+ if (vgtod)
+ ret_vsys = vgtod(&tv_vsys, &tz_vsys);
+ if (sys_gtod(&tv_sys2, &tz_sys) != 0)
+ err(1, "syscall gettimeofday");
+
+ if (vdso_gtod) {
+ if (ret_vdso == 0) {
+ nerrs += check_gtod(&tv_sys1, &tv_sys2, &tz_sys, "vDSO", &tv_vdso, &tz_vdso);
+ } else {
+ printf("[FAIL]\tvDSO gettimeofday() failed: %ld\n", ret_vdso);
+ nerrs++;
+ }
+ }
+
+ if (vgtod) {
+ if (ret_vsys == 0) {
+ nerrs += check_gtod(&tv_sys1, &tv_sys2, &tz_sys, "vsyscall", &tv_vsys, &tz_vsys);
+ } else {
+ printf("[FAIL]\tvsys gettimeofday() failed: %ld\n", ret_vsys);
+ nerrs++;
+ }
+ }
+
+ return nerrs;
+}
+
+static int test_time(void) {
+ int nerrs = 0;
+
+ printf("[RUN]\ttest time()\n");
+ long t_sys1, t_sys2, t_vdso = 0, t_vsys = 0;
+ long t2_sys1 = -1, t2_sys2 = -1, t2_vdso = -1, t2_vsys = -1;
+ t_sys1 = sys_time(&t2_sys1);
+ if (vdso_time)
+ t_vdso = vdso_time(&t2_vdso);
+ if (vtime)
+ t_vsys = vtime(&t2_vsys);
+ t_sys2 = sys_time(&t2_sys2);
+ if (t_sys1 < 0 || t_sys1 != t2_sys1 || t_sys2 < 0 || t_sys2 != t2_sys2) {
+ printf("[FAIL]\tsyscall failed (ret1:%ld output1:%ld ret2:%ld output2:%ld)\n", t_sys1, t2_sys1, t_sys2, t2_sys2);
+ nerrs++;
+ return nerrs;
+ }
+
+ if (vdso_time) {
+ if (t_vdso < 0 || t_vdso != t2_vdso) {
+ printf("[FAIL]\tvDSO failed (ret:%ld output:%ld)\n", t_vdso, t2_vdso);
+ nerrs++;
+ } else if (t_vdso < t_sys1 || t_vdso > t_sys2) {
+ printf("[FAIL]\tvDSO returned the wrong time (%ld %ld %ld)\n", t_sys1, t_vdso, t_sys2);
+ nerrs++;
+ } else {
+ printf("[OK]\tvDSO time() is okay\n");
+ }
+ }
+
+ if (vtime) {
+ if (t_vsys < 0 || t_vsys != t2_vsys) {
+ printf("[FAIL]\tvsyscall failed (ret:%ld output:%ld)\n", t_vsys, t2_vsys);
+ nerrs++;
+ } else if (t_vsys < t_sys1 || t_vsys > t_sys2) {
+ printf("[FAIL]\tvsyscall returned the wrong time (%ld %ld %ld)\n", t_sys1, t_vsys, t_sys2);
+ nerrs++;
+ } else {
+ printf("[OK]\tvsyscall time() is okay\n");
+ }
+ }
+
+ return nerrs;
+}
+
+static int test_getcpu(int cpu)
+{
+ int nerrs = 0;
+ long ret_sys, ret_vdso = -1, ret_vsys = -1;
+
+ printf("[RUN]\tgetcpu() on CPU %d\n", cpu);
+
+ cpu_set_t cpuset;
+ CPU_ZERO(&cpuset);
+ CPU_SET(cpu, &cpuset);
+ if (sched_setaffinity(0, sizeof(cpuset), &cpuset) != 0) {
+ printf("[SKIP]\tfailed to force CPU %d\n", cpu);
+ return nerrs;
+ }
+
+ unsigned cpu_sys, cpu_vdso, cpu_vsys, node_sys, node_vdso, node_vsys;
+ unsigned node = 0;
+ bool have_node = false;
+ ret_sys = sys_getcpu(&cpu_sys, &node_sys, 0);
+ if (vdso_getcpu)
+ ret_vdso = vdso_getcpu(&cpu_vdso, &node_vdso, 0);
+ if (vgetcpu)
+ ret_vsys = vgetcpu(&cpu_vsys, &node_vsys, 0);
+
+ if (ret_sys == 0) {
+ if (cpu_sys != cpu) {
+ printf("[FAIL]\tsyscall reported CPU %hu but should be %d\n", cpu_sys, cpu);
+ nerrs++;
+ }
+
+ have_node = true;
+ node = node_sys;
+ }
+
+ if (vdso_getcpu) {
+ if (ret_vdso) {
+ printf("[FAIL]\tvDSO getcpu() failed\n");
+ nerrs++;
+ } else {
+ if (!have_node) {
+ have_node = true;
+ node = node_vdso;
+ }
+
+ if (cpu_vdso != cpu) {
+ printf("[FAIL]\tvDSO reported CPU %hu but should be %d\n", cpu_vdso, cpu);
+ nerrs++;
+ } else {
+ printf("[OK]\tvDSO reported correct CPU\n");
+ }
+
+ if (node_vdso != node) {
+ printf("[FAIL]\tvDSO reported node %hu but should be %hu\n", node_vdso, node);
+ nerrs++;
+ } else {
+ printf("[OK]\tvDSO reported correct node\n");
+ }
+ }
+ }
+
+ if (vgetcpu) {
+ if (ret_vsys) {
+ printf("[FAIL]\tvsyscall getcpu() failed\n");
+ nerrs++;
+ } else {
+ if (!have_node) {
+ have_node = true;
+ node = node_vsys;
+ }
+
+ if (cpu_vsys != cpu) {
+ printf("[FAIL]\tvsyscall reported CPU %hu but should be %d\n", cpu_vsys, cpu);
+ nerrs++;
+ } else {
+ printf("[OK]\tvsyscall reported correct CPU\n");
+ }
+
+ if (node_vsys != node) {
+ printf("[FAIL]\tvsyscall reported node %hu but should be %hu\n", node_vsys, node);
+ nerrs++;
+ } else {
+ printf("[OK]\tvsyscall reported correct node\n");
+ }
+ }
+ }
+
+ return nerrs;
+}
+
+static int test_vsys_r(void)
+{
+#ifdef __x86_64__
+ printf("[RUN]\tChecking read access to the vsyscall page\n");
+ bool can_read;
+ if (sigsetjmp(jmpbuf, 1) == 0) {
+ *(volatile int *)0xffffffffff600000;
+ can_read = true;
+ } else {
+ can_read = false;
+ }
+
+ if (can_read && !should_read_vsyscall) {
+ printf("[FAIL]\tWe have read access, but we shouldn't\n");
+ return 1;
+ } else if (!can_read && should_read_vsyscall) {
+ printf("[FAIL]\tWe don't have read access, but we should\n");
+ return 1;
+ } else {
+ printf("[OK]\tgot expected result\n");
+ }
+#endif
+
+ return 0;
+}
+
+
+#ifdef __x86_64__
+#define X86_EFLAGS_TF (1UL << 8)
+static volatile sig_atomic_t num_vsyscall_traps;
+
+static unsigned long get_eflags(void)
+{
+ unsigned long eflags;
+ asm volatile ("pushfq\n\tpopq %0" : "=rm" (eflags));
+ return eflags;
+}
+
+static void set_eflags(unsigned long eflags)
+{
+ asm volatile ("pushq %0\n\tpopfq" : : "rm" (eflags) : "flags");
+}
+
+static void sigtrap(int sig, siginfo_t *info, void *ctx_void)
+{
+ ucontext_t *ctx = (ucontext_t *)ctx_void;
+ unsigned long ip = ctx->uc_mcontext.gregs[REG_RIP];
+
+ if (((ip ^ 0xffffffffff600000UL) & ~0xfffUL) == 0)
+ num_vsyscall_traps++;
+}
+
+static int test_native_vsyscall(void)
+{
+ time_t tmp;
+ bool is_native;
+
+ if (!vtime)
+ return 0;
+
+ printf("[RUN]\tchecking for native vsyscall\n");
+ sethandler(SIGTRAP, sigtrap, 0);
+ set_eflags(get_eflags() | X86_EFLAGS_TF);
+ vtime(&tmp);
+ set_eflags(get_eflags() & ~X86_EFLAGS_TF);
+
+ /*
+ * If vsyscalls are emulated, we expect a single trap in the
+ * vsyscall page -- the call instruction will trap with RIP
+ * pointing to the entry point before emulation takes over.
+ * In native mode, we expect two traps, since whatever code
+ * the vsyscall page contains will be more than just a ret
+ * instruction.
+ */
+ is_native = (num_vsyscall_traps > 1);
+
+ printf("\tvsyscalls are %s (%d instructions in vsyscall page)\n",
+ (is_native ? "native" : "emulated"),
+ (int)num_vsyscall_traps);
+
+ return 0;
+}
+#endif
+
+int main(int argc, char **argv)
+{
+ int nerrs = 0;
+
+ init_vdso();
+ nerrs += init_vsys();
+
+ nerrs += test_gtod();
+ nerrs += test_time();
+ nerrs += test_getcpu(0);
+ nerrs += test_getcpu(1);
+
+ sethandler(SIGSEGV, sigsegv, 0);
+ nerrs += test_vsys_r();
+
+#ifdef __x86_64__
+ nerrs += test_native_vsyscall();
+#endif
+
+ return nerrs ? 1 : 0;
+}