asan.c (create_cond_insert_point): Maintain profile.

	* asan.c (create_cond_insert_point): Maintain profile.
	* ipa-utils.c (ipa_merge_profiles): Be sure only IPA profiles are
	merged.
	* basic-block.h (struct basic_block_def): Remove frequency.
	(EDGE_FREQUENCY): Use to_frequency
	* bb-reorder.c (push_to_next_round_p): Use only IPA counts for global
	heuristics.
	(find_traces): Update to use to_frequency.
	(find_traces_1_round): Likewise; use only IPA counts.
	(bb_to_key): Likewise.
	(connect_traces): Use IPA counts only.
	(copy_bb_p): Update to use to_frequency.
	(fix_up_crossing_landing_pad): Likewise.
	(sanitize_hot_paths): Likewise.
	* bt-load.c (basic_block_freq): Likewise.
	* cfg.c (init_flow): Set count_max to uninitialized.
	(check_bb_profile): Remove frequencies; check counts.
	(dump_bb_info): Do not dump frequencies.
	(update_bb_profile_for_threading): Update counts only.
	(scale_bbs_frequencies_int): Likewise.
	(MAX_SAFE_MULTIPLIER): Remove.
	(scale_bbs_frequencies_gcov_type): Update counts only.
	(scale_bbs_frequencies_profile_count): Update counts only.
	(scale_bbs_frequencies): Update counts only.
	* cfg.h (struct control_flow_graph): Add count-max.
	(update_bb_profile_for_threading): Update prototype.
	* cfgbuild.c (find_bb_boundaries): Do not update frequencies.
	(find_many_sub_basic_blocks): Likewise.
	* cfgcleanup.c (try_forward_edges): Likewise.
	(try_crossjump_to_edge): Likewise.
	* cfgexpand.c (expand_gimple_cond): Likewise.
	(expand_gimple_tailcall): Likewise.
	(construct_init_block): Likewise.
	(construct_exit_block): Likewise.
	* cfghooks.c (verify_flow_info): Check consistency of counts.
	(dump_bb_for_graph): Do not dump frequencies.
	(split_block_1): Do not update frequencies.
	(split_edge): Do not update frequencies.
	(make_forwarder_block): Do not update frequencies.
	(duplicate_block): Do not update frequencies.
	(account_profile_record): Do not update frequencies.
	* cfgloop.c (find_subloop_latch_edge_by_profile): Use IPA counts
	for global heuristics.
	* cfgloopanal.c (average_num_loop_insns): Update to use to_frequency.
	(expected_loop_iterations_unbounded): Use counts only.
	* cfgloopmanip.c (scale_loop_profile): Simplify.
	(create_empty_loop_on_edge): Simplify
	(loopify): Simplify
	(duplicate_loop_to_header_edge): Simplify
	* cfgrtl.c (force_nonfallthru_and_redirect): Update profile.
	(update_br_prob_note): Take care of removing note when profile
	becomes undefined.
	(relink_block_chain): Do not dump frequency.
	(rtl_account_profile_record): Use to_frequency.
	* cgraph.c (symbol_table::create_edge): Convert count to ipa count.
	(cgraph_edge::redirect_call_stmt_to_calle): Conver tcount to ipa count.
	(cgraph_update_edges_for_call_stmt_node): Likewise.
	(cgraph_edge::verify_count_and_frequency): Update.
	(cgraph_node::verify_node): Temporarily disable frequency verification.
	* cgraphbuild.c (compute_call_stmt_bb_frequency): Use
	to_cgraph_frequency.
	(cgraph_edge::rebuild_edges): Convert to ipa counts.
	* cgraphunit.c (init_lowered_empty_function): Do not initialize
	frequencies.
	(cgraph_node::expand_thunk): Update profile.
	* except.c (dw2_build_landing_pads): Do not update frequency.
	* final.c (compute_alignments): Use to_frequency.
	(dump_basic_block_info): Do not dump frequency.
	* gimple-pretty-print.c (dump_profile): Do not dump frequency.
	(dump_gimple_bb_header): Do not dump frequency.
	* gimple-ssa-isolate-paths.c (isolate_path): Do not update frequency;
	do update count.
	* gimple-streamer-in.c (input_bb): Do not stream frequency.
	* gimple-streamer-out.c (output_bb): Do not stream frequency.
	* haifa-sched.c (sched_pressure_start_bb): Use to_freuqency.
	(init_before_recovery): Do not update frequency.
	(sched_create_recovery_edges): Do not update frequency.
	* hsa-gen.c (convert_switch_statements): Do not update frequency.
	* ipa-cp.c (ipcp_propagate_stage): Update search for max_count.
	(ipa_cp_c_finalize): Set max_count to uninitialized.
	* ipa-fnsummary.c (get_minimal_bb): Use counts.
	(param_change_prob): Use counts.
	* ipa-profile.c (ipa_profile_generate_summary): Do not summarize
	local profiles.
	* ipa-split.c (consider_split): Use to_frequency.
	(split_function): Use to_frequency.
	* ira-build.c (loop_compare_func): Likewise.
	(mark_loops_for_removal): Likewise.
	(mark_all_loops_for_removal): Likewise.
	* loop-doloop.c (doloop_modify): Do not update frequency.
	* loop-unroll.c (unroll_loop_runtime_iterations): Do not update
	frequency.
	* lto-streamer-in.c (input_function): Update count_max.
	* omp-expand.c (expand_omp_taskreg): Update count_max.
	* omp-simd-clone.c (simd_clone_adjust): Update profile.
	* predict.c (maybe_hot_frequency_p): Use to_frequency.
	(maybe_hot_count_p): Use ipa counts only.
	(maybe_hot_bb_p): Simplify.
	(maybe_hot_edge_p): Simplify.
	(probably_never_executed): Do not take frequency argument.
	(probably_never_executed_bb_p): Do not pass frequency.
	(probably_never_executed_edge_p): Likewise.
	(combine_predictions_for_bb): Check that profile is nonzero.
	(propagate_freq): Do not set frequency.
	(drop_profile): Simplify.
	(counts_to_freqs): Simplify.
	(expensive_function_p): Use to_frequency.
	(propagate_unlikely_bbs_forward): Simplify.
	(determine_unlikely_bbs): Simplify.
	(estimate_bb_frequencies): Add hack to silence graphite issues.
	(compute_function_frequency): Use ipa counts.
	(pass_profile::execute): Update.
	(rebuild_frequencies): Use counts only.
	(force_edge_cold): Use counts only.
	* profile-count.c (profile_count::dump): Dump new count types.
	(profile_count::differs_from_p): Check compatiblity.
	(profile_count::to_frequency): New function.
	(profile_count::to_cgraph_frequency): New function.
	* profile-count.h (struct function): Declare.
	(enum profile_quality): Add profile_guessed_local and
	profile_guessed_global0.
	(class profile_proability): Decrease number of bits to 29;
	update from_reg_br_prob_note and to_reg_br_prob_note.
	(class profile_count: Update comment; decrease number of bits
	to 61. Check compatibility.
	(profile_count::compatible_p): New private member function.
	(profile_count::ipa_p): New member function.
	(profile_count::operator<): Handle global zero correctly.
	(profile_count::operator>): Handle global zero correctly.
	(profile_count::operator<=): Handle global zero correctly.
	(profile_count::operator>=): Handle global zero correctly.
	(profile_count::nonzero_p): New member function.
	(profile_count::force_nonzero): New member function.
	(profile_count::max): New member function.
	(profile_count::apply_scale): Handle IPA scalling.
	(profile_count::guessed_local): New member function.
	(profile_count::global0): New member function.
	(profile_count::ipa): New member function.
	(profile_count::to_frequency): Declare.
	(profile_count::to_cgraph_frequency): Declare.
	* profile.c (OVERLAP_BASE): Delete.
	(compute_frequency_overlap): Delete.
	(compute_branch_probabilities): Do not use compute_frequency_overlap.
	* regs.h (REG_FREQ_FROM_BB): Use to_frequency.
	* sched-ebb.c (rank): Use counts only.
	* shrink-wrap.c (handle_simple_exit): Use counts only.
	(try_shrink_wrapping): Use counts only.
	(place_prologue_for_one_component): Use counts only.
	* tracer.c (find_best_predecessor): Use to_frequency.
	(find_trace): Use to_frequency.
	(tail_duplicate): Use to_frequency.
	* trans-mem.c (expand_transaction): Do not update frequency.
	* tree-call-cdce.c: Do not update frequency. 
	* tree-cfg.c (gimple_find_sub_bbs): Likewise.
	(gimple_merge_blocks): Likewise.
	(gimple_split_edge): Likewise.
	(gimple_duplicate_sese_region): Likewise.
	(gimple_duplicate_sese_tail): Likewise.
	(move_sese_region_to_fn): Likewise.
	(gimple_account_profile_record): Likewise.
	(insert_cond_bb): Likewise.
	* tree-complex.c (expand_complex_div_wide): Likewise.
	* tree-eh.c (lower_resx): Update profile.
	* tree-inline.c (copy_bb): Simplify count scaling; do not scale
	frequencies.
	(initialize_cfun): Do not initialize frequencies
	(freqs_to_counts): Delete.
	(copy_cfg_body): Ignore count parameter.
	(copy_body): Update.
	(expand_call_inline): Update count_max.
	(optimize_inline_calls): Update count_max.
	(tree_function_versioning): Update count_max.
	* tree-ssa-coalesce.c (coalesce_cost_bb): Use to_frequency.
	* tree-ssa-ifcombine.c (update_profile_after_ifcombine): Do not update
	frequency.
	* tree-ssa-loop-im.c (execute_sm_if_changed): Use counts only.
	* tree-ssa-loop-ivcanon.c (unloop_loops): Do not update freuqency.
	(try_peel_loop): Likewise.
	* tree-ssa-loop-ivopts.c (get_scaled_computation_cost_at): Use
	to_frequency.
	* tree-ssa-loop-manip.c (niter_for_unrolled_loop): Pass -1.
	(tree_transform_and_unroll_loop): Do not use frequencies
	* tree-ssa-loop-niter.c (estimate_numbers_of_iterations):
	Use reliable prediction only.
	* tree-ssa-loop-unswitch.c (hoist_guard): Do not use frequencies.
	* tree-ssa-sink.c (select_best_block): Use to_frequency.
	* tree-ssa-tail-merge.c (replace_block_by): Temporarily disable
	probability scaling.
	* tree-ssa-threadupdate.c (create_block_for_threading): Do
	not update frequency
	(any_remaining_duplicated_blocks): Likewise.
	(update_profile): Likewise.
	(estimated_freqs_path): Delete.
	(freqs_to_counts_path): Delete.
	(clear_counts_path): Delete.
	(ssa_fix_duplicate_block_edges): Likewise.
	(duplicate_thread_path): Likewise.
	* tree-switch-conversion.c (gen_inbound_check): Use counts.
	* tree-tailcall.c (decrease_profile): Do not update frequency.
	(eliminate_tail_call): Likewise.
	* tree-vect-loop-manip.c (vect_do_peeling): Likewise.
	* tree-vect-loop.c (scale_profile_for_vect_loop): Likewise.
	(optimize_mask_stores): Likewise.
	* tree-vect-stmts.c (vectorizable_simd_clone_call): Likewise.
	* ubsan.c (ubsan_expand_null_ifn): Update profile.
	(ubsan_expand_ptr_ifn): Update profile.
	* value-prof.c (gimple_ic): Simplify.
	* value-prof.h (gimple_ic): Update prototype.
	* ipa-inline-transform.c (inline_transform): Fix scaling conditoins.
	* ipa-inline.c (compute_uninlined_call_time): Be sure that
	counts are nonzero.
	(want_inline_self_recursive_call_p): Likewise.
	(resolve_noninline_speculation): Only cummulate defined counts.
	(inline_small_functions): Use nonzero_p.
	(ipa_inline): Do not access freed node.

Unknown ChangeLog:

2017-11-02  Jan Hubicka  <hubicka@ucw.cz>

	* testsuite/gcc.dg/no-strict-overflow-3.c (foo): Update magic
	value to not clash with frequency.
	* testsuite/gcc.dg/strict-overflow-3.c (foo): Likewise.
	* testsuite/gcc.dg/tree-ssa/builtin-sprintf-2.c: Update template.
	* testsuite/gcc.dg/tree-ssa/dump-2.c: Update template.
	* testsuite/gcc.dg/tree-ssa/ifc-10.c: Update template.
	* testsuite/gcc.dg/tree-ssa/ifc-11.c: Update template.
	* testsuite/gcc.dg/tree-ssa/ifc-12.c: Update template.
	* testsuite/gcc.dg/tree-ssa/ifc-20040816-1.c: Update template.
	* testsuite/gcc.dg/tree-ssa/ifc-20040816-2.c: Update template.
	* testsuite/gcc.dg/tree-ssa/ifc-5.c: Update template.
	* testsuite/gcc.dg/tree-ssa/ifc-8.c: Update template.
	* testsuite/gcc.dg/tree-ssa/ifc-9.c: Update template.
	* testsuite/gcc.dg/tree-ssa/ifc-cd.c: Update template.
	* testsuite/gcc.dg/tree-ssa/ifc-pr56541.c: Update template.
	* testsuite/gcc.dg/tree-ssa/ifc-pr68583.c: Update template.
	* testsuite/gcc.dg/tree-ssa/ifc-pr69489-1.c: Update template.
	* testsuite/gcc.dg/tree-ssa/ifc-pr69489-2.c: Update template.
	* testsuite/gcc.target/i386/pr61403.c: Update template.

From-SVN: r254379

1 files changed, 7 insertions, 30 deletions

diff --git a/gcc/cfghooks.c b/gcc/cfghooks.c
index 320036bc757..4a224243e32 100644
--- a/gcc/cfghooks.c
+++ b/gcc/cfghooks.c
@@ -146,10 +146,12 @@ verify_flow_info (void)
 	  error ("verify_flow_info: Wrong count of block %i", bb->index);
 	  err = 1;
 	}
-      if (bb->frequency < 0)
+      /* FIXME: Graphite and SLJL and target code still tends to produce
+	 edges with no probablity.  */
+      if (profile_status_for_fn (cfun) >= PROFILE_GUESSED
+          && !bb->count.initialized_p () && !flag_graphite && 0)
 	{
-	  error ("verify_flow_info: Wrong frequency of block %i %i",
-		 bb->index, bb->frequency);
+	  error ("verify_flow_info: Missing count of block %i", bb->index);
 	  err = 1;
 	}
 
@@ -164,7 +166,7 @@ verify_flow_info (void)
 	  /* FIXME: Graphite and SLJL and target code still tends to produce
 	     edges with no probablity.  */
 	  if (profile_status_for_fn (cfun) >= PROFILE_GUESSED
-	      && !e->probability.initialized_p () && 0)
+	      && !e->probability.initialized_p () && !flag_graphite && 0)
 	    {
 	      error ("Uninitialized probability of edge %i->%i", e->src->index,
 		     e->dest->index);
@@ -315,7 +317,6 @@ dump_bb_for_graph (pretty_printer *pp, basic_block bb)
   /* TODO: Add pretty printer for counter.  */
   if (bb->count.initialized_p ())
     pp_printf (pp, "COUNT:" "%" PRId64, bb->count.to_gcov_type ());
-  pp_printf (pp, " FREQ:%i |", bb->frequency);
   pp_write_text_to_stream (pp);
   if (!(dump_flags & TDF_SLIM))
     cfg_hooks->dump_bb_for_graph (pp, bb);
@@ -513,7 +514,6 @@ split_block_1 (basic_block bb, void *i)
     return NULL;
 
   new_bb->count = bb->count;
-  new_bb->frequency = bb->frequency;
   new_bb->discriminator = bb->discriminator;
 
   if (dom_info_available_p (CDI_DOMINATORS))
@@ -626,7 +626,6 @@ split_edge (edge e)
 {
   basic_block ret;
   profile_count count = e->count ();
-  int freq = EDGE_FREQUENCY (e);
   edge f;
   bool irr = (e->flags & EDGE_IRREDUCIBLE_LOOP) != 0;
   struct loop *loop;
@@ -640,7 +639,6 @@ split_edge (edge e)
 
   ret = cfg_hooks->split_edge (e);
   ret->count = count;
-  ret->frequency = freq;
   single_succ_edge (ret)->probability = profile_probability::always ();
 
   if (irr)
@@ -869,7 +867,6 @@ make_forwarder_block (basic_block bb, bool (*redirect_edge_p) (edge),
   fallthru = split_block_after_labels (bb);
   dummy = fallthru->src;
   dummy->count = profile_count::zero ();
-  dummy->frequency = 0;
   bb = fallthru->dest;
 
   /* Redirect back edges we want to keep.  */
@@ -879,10 +876,6 @@ make_forwarder_block (basic_block bb, bool (*redirect_edge_p) (edge),
 
       if (redirect_edge_p (e))
 	{
-	  dummy->frequency += EDGE_FREQUENCY (e);
-	  if (dummy->frequency > BB_FREQ_MAX)
-	    dummy->frequency = BB_FREQ_MAX;
-
 	  dummy->count += e->count ();
 	  ei_next (&ei);
 	  continue;
@@ -1101,19 +1094,10 @@ duplicate_block (basic_block bb, edge e, basic_block after)
       new_bb->count = new_count;
       bb->count -= new_count;
 
-      new_bb->frequency = EDGE_FREQUENCY (e);
-      bb->frequency -= EDGE_FREQUENCY (e);
-
       redirect_edge_and_branch_force (e, new_bb);
-
-      if (bb->frequency < 0)
-	bb->frequency = 0;
     }
   else
-    {
-      new_bb->count = bb->count;
-      new_bb->frequency = bb->frequency;
-    }
+    new_bb->count = bb->count;
 
   set_bb_original (new_bb, bb);
   set_bb_copy (bb, new_bb);
@@ -1463,13 +1447,6 @@ account_profile_record (struct profile_record *record, int after_pass)
       if (bb != ENTRY_BLOCK_PTR_FOR_FN (cfun)
 	  && profile_status_for_fn (cfun) != PROFILE_ABSENT)
 	{
-	  int sum = 0;
-	  FOR_EACH_EDGE (e, ei, bb->preds)
-	    sum += EDGE_FREQUENCY (e);
-	  if (abs (sum - bb->frequency) > 100
-	      || (MAX (sum, bb->frequency) > 10
-		  && abs ((sum - bb->frequency) * 100 / (MAX (sum, bb->frequency) + 1)) > 10))
-	    record->num_mismatched_freq_in[after_pass]++;
 	  profile_count lsum = profile_count::zero ();
 	  FOR_EACH_EDGE (e, ei, bb->preds)
 	    lsum += e->count ();