summaryrefslogtreecommitdiff
path: root/include/opcode
AgeCommit message (Collapse)Author
2018-01-04RISC-V: Add 2 missing privileged registers.Jim Wilson
gas/ * testsuite/gas/riscv/priv-reg.s: Add missing stval and mtval. * testsuite/gas/riscv/priv-reg.d: Likewise. include/ * opcode/riscv-opc.h (CSR_SBADADDR): Rename to CSR_STVAL. Rename DECLARE_CSR entry. Add alias to map sbadaddr to CSR_STVAL. (CSR_MBADADDR): Rename to CSR_MTVAL. Rename DECLARE_CSR entry. Add alias to map mbadaddr to CSR_MTVAL.
2018-01-03Update year range in copyright notice of binutils filesAlan Modra
2017-12-28RISC-V: Add missing privileged spec registers.Jim Wilson
gas/ * testsuite/gas/riscv/priv-reg.d, testsuite/gas/riscv/priv-reg.s: New. include/ * opcode/riscv-opc.h (DECLARE_CSR): Add missing privileged registers. Sort to match privileged spec documentation order. (DECLARE_CSR_ALIAS): Add ubadaddr, and comments.
2017-12-19Correct disassembly of dot product instructions.Tamar Christina
Dot products deviate from the normal disassembly rules for lane indexed instruction. Their canonical representation is in the form of: v0.2s, v0.8b, v0.4b[0] instead of v0.2s, v0.8b, v0.b[0] to try to denote that these instructions select 4x 1 byte elements instead of a single 1 byte element. Previously we were disassembling them following the normal rules, this patch corrects the disassembly. gas/ PR gas/22559 * config/tc-aarch64.c (vectype_to_qualifier): Support AARCH64_OPND_QLF_S_4B. * gas/testsuite/gas/aarch64/dotproduct.d: Update disassembly. include/ PR gas/22559 * aarch64.h (aarch64_opnd_qualifier): Add AARCH64_OPND_QLF_S_4B. opcodes/ PR gas/22559 * aarch64-asm.c (aarch64_ins_reglane): Change AARCH64_OPND_QLF_S_B to AARCH64_OPND_QLF_S_4B * aarch64-dis.c (aarch64_ext_reglane): Change AARCH64_OPND_QLF_S_B to AARCH64_OPND_QLF_S_4B * aarch64-opc.c (aarch64_opnd_qualifiers): Add 4b variant. * aarch64-tbl.h (QL_V2DOT): Change S_B to S_4B.
2017-12-19Add support for V_4B so we can properly reject it.Tamar Christina
Previously parse_vector_type_for_operand was changed to allow the use of 4b register size for indexed lane instructions. However this had the unintended side effect of also allowing 4b for normal vector registers. Because this support was only partial the rest of the tool silently treated 4b as 8b and continued. This patch adds full support for 4b so it can be properly distinguished from 8b and the correct errors are generated. With this patch you still can't encode any instruction which actually requires v<num>.4b but such instructions don't exist so to prevent needing a workaround in get_vreg_qualifier_from_value this was just omitted. gas/ PR gas/22529 * config/tc-aarch64.c (vectype_to_qualifier): Support AARCH64_OPND_QLF_V_4B. * gas/testsuite/gas/aarch64/pr22529.s: New. * gas/testsuite/gas/aarch64/pr22529.d: New. * gas/testsuite/gas/aarch64/pr22529.l: New. include/ PR gas/22529 * opcode/aarch64.h (aarch64_opnd_qualifier): Add AARCH64_OPND_QLF_V_4B. opcodes/ PR gas/22529 * aarch64-opc.c (aarch64_opnd_qualifiers): Add 4b variant.
2017-12-01Use consistent types for holding instructions, instruction masks, etc.Peter Bergner
include/ * opcode/ppc.h (PPC_INT_FMT): Define. (struct powerpc_opcode) <opcode>: Update type. (struct powerpc_opcode) <mask>: Likewise. (struct powerpc_opcode) <bitm>: Likewise. (struct powerpc_opcode) <insert>: Likewise. (struct powerpc_opcode) <extract>: Likewise. (ppc_optional_operand_value): Likewise. gas/ * config/tc-ppc.c (last_insn): Update type. (insn_validate) <omask, mask>: Likewise. (ppc_setup_opcodes) <mask, right_bit>: Likewise. <PRINT_OPCODE_TABLE>: Update types and printf format specifiers. (ppc_insert_operand): Update return and argument types and remove unneeded type casts. <min, max, right, tmp>: Update type. (md_assemble): Remove unneeded type casts. <insn, val, tmp_insn>: Update type. opcodes/ * opcodes/ppc-dis.c (disassemble_init_powerpc): Fix white space. (operand_value_powerpc): Update return and argument type. <value, top>: Update type. (skip_optional_operands): Update argument type. (lookup_powerpc): Likewise. (lookup_vle): Likewise. <table_opcd, table_mask, insn2>: Update type. (lookup_spe2): Update argument type. <table_opcd, table_mask, insn2>: Update type. (print_insn_powerpc) <insn, value>: Update type. Use PPC_INT_FMT for printing instructions and operands. * opcodes/ppc-opc.c (insert_arx, extract_arx, insert_ary, extract_ary, insert_rx, extract_rx, insert_ry, extract_ry, insert_bat, extract_bat, insert_bba, extract_bba, insert_bdm, extract_bdm, insert_bdp, extract_bdp, valid_bo_pre_v2, valid_bo_post_v2, valid_bo, insert_bo, extract_bo, insert_boe, extract_boe, insert_dcmxs, extract_dcmxs, insert_dxd, extract_dxd, insert_dxdn, extract_dxdn, insert_fxm, extract_fxm, insert_li20, extract_li20, insert_ls, extract_ls, insert_esync, extract_esync, insert_mbe, extract_mbe, insert_mb6, extract_mb6, extract_nb, insert_nbi, insert_nsi, extract_nsi, insert_ral, extract_ral, insert_ram, extract_ram, insert_raq, extract_raq, insert_ras, extract_ras, insert_rbs, extract_rbs, insert_rbx, extract_rbx, insert_sci8, extract_sci8, insert_sci8n, extract_sci8n, insert_sd4h, extract_sd4h, insert_sd4w, extract_sd4w, insert_oimm, extract_oimm, insert_sh6, extract_sh6, insert_spr, extract_spr, insert_sprg, extract_sprg, insert_tbr, extract_tbr, insert_xt6, extract_xt6, insert_xtq6, extract_xtq6, insert_xa6, extract_xa6, insert_xb6, extract_xb6, insert_xb6s, extract_xb6s, insert_xc6, extract_xc6, insert_dm, extract_dm, insert_vlesi, extract_vlesi, insert_vlensi, extract_vlensi, insert_vleui, extract_vleui, insert_vleil, extract_vleil, insert_evuimm1_ex0, extract_evuimm1_ex0, insert_evuimm2_ex0, extract_evuimm2_ex0, insert_evuimm4_ex0, extract_evuimm4_ex0, insert_evuimm8_ex0, extract_evuimm8_ex0, insert_evuimm_lt8, extract_evuimm_lt8, insert_evuimm_lt16, extract_evuimm_lt16, insert_rD_rS_even, extract_rD_rS_even, insert_off_lsp, extract_off_lsp, insert_off_spe2, extract_off_spe2, insert_Ddd, extract_Ddd): Update types. (OP, OPTO, OPL, OPVUP, OPVUPRT, A, AFRALFRC_MASK, B, BD8, BD8IO, BD15, BD24, BBO, Y_MASK , AT1_MASK, AT2_MASK, BBOCB, C_LK, C, CTX, UCTX, DX, EVSEL, IA16, I16A, I16L, IM7, LI20, MME, MD, MDS, SC, SC_MASK, SCI8, SCI8BF, SD4, SE_IM5, SE_R, SE_RR, VX, VX_LSP, VX_RA_CONST, VX_RB_CONST, VX_SPE_CRFD, VX_SPE2_CLR, VX_SPE2_SPLATB, VX_SPE2_OCTET, VX_SPE2_DDHH, VX_SPE2_HH, VX_SPE2_EVMAR, VX_SPE2_EVMAR_MASK, VXA, VXR, VXASH, X, EX, XX2, XX3, XX3RC, XX4, Z, XWRA_MASK, XLRT_MASK, XRLARB_MASK, XLRAND_MASK, XRTLRA_MASK, XRTLRARB_MASK, XRTARARB_MASK, XRTBFRARB_MASK, XOPL, XOPL2, XRCL, XRT, XRTRA, XCMP_MASK, XCMPL_MASK, XTO, XTLB, XSYNC, XEH_MASK, XDSS, XFL, XISEL, XL, XLO, XLYLK, XLOCB, XMBAR, XO, XOPS, XS, XFXM, XSPR, XUC, XW, APU): Update types in casts.
2017-11-16Add new AArch64 FP16 FM{A|S} instructions.Tamar Christina
This patch separates the new FP16 instructions backported from Armv8.4-a to Armv8.2-a into a new flag order to distinguish them from the rest of the already existing optional FP16 instructions in Armv8.2-a. The new flag "+fp16fml" is available from Armv8.2-a and implies +fp16 and is mandatory on Armv8.4-a. gas/ * config/tc-aarch64.c (fp16fml): New. * doc/c-aarch64.texi (fp16fml): New. * testsuite/gas/aarch64/armv8_2-a-crypto-fp16.d (fp16): Make fp16fml. * testsuite/gas/aarch64/armv8_3-a-crypto-fp16.d (fp16): Make fp16fml. include/ * opcode/aarch64.h: (AARCH64_FEATURE_F16_FML): New. (AARCH64_ARCH_V8_4): Enable AARCH64_FEATURE_F16_FML by default. opcodes/ * aarch64-tbl.h (aarch64_feature_fp_16_v8_2): Require AARCH64_FEATURE_F16_FML and AARCH64_FEATURE_F16.
2017-11-15Separate the new FP16 instructions backported from Armv8.4-a to Armv8.2-a ↵Tamar Christina
into a new flag order to distinguish them from the rest of the already existing optional FP16 instructions in Armv8.2-a. The new flag "+fp16fml" is available from Armv8.2-a and implies +fp16 and is mandatory from Armv8.4-a. gas/ * config/tc-arm.c (arm_ext_fp16_fml, fp16fml): New. (do_neon_fmac_maybe_scalar_long): Use arm_ext_fp16_fml. * doc/c-arm.texi (fp16, fp16fml): New. * testsuite/gas/arm/armv8_2-a-fp16.d (fp16): Make fp16fml. * testsuite/gas/arm/armv8_3-a-fp16.d (fp16): Make fp16fml. * testsuite/gas/arm/armv8_2-a-fp16-illegal.d (fp16): Make fp16fml. * testsuite/gas/arm/armv8_2-a-fp16-thumb2.d (fp16): Make fp16fml. include/ * opcode/arm.h: (ARM_EXT2_FP16_FML): New. (ARM_AEXT2_V8_4A): Add ARM_EXT2_FP16_FML.
2017-11-09Enable the Dot Product extension by default for Armv8.4-a.Tamar Christina
include/ * opcode/aarch64.h (AARCH64_ARCH_V8_4): Enable DOTPROD. gas/testsuite * gas/aarch64/dotproduct_armv8_4.s: New. * gas/aarch64/dotproduct_armv8_4.d: New.
2017-11-09Adds the new Fields and Operand types for the new instructions in Armv8.4-a.Tamar Christina
gas/ * config/tc-aarch64.c (process_omitted_operand): Add AARCH64_OPND_Va, AARCH64_OPND_SM3_IMM2 and AARCH64_OPND_IMM_2. (parse_operands): Add AARCH64_OPND_Va, AARCH64_OPND_SM3_IMM2, AARCH64_OPND_IMM_2, AARCH64_OPND_MASK and AARCH64_OPND_ADDR_OFFSET. include/ * opcode/aarch64.h: (aarch64_opnd): Add AARCH64_OPND_Va, AARCH64_OPND_MASK, AARCH64_OPND_IMM_2, AARCH64_OPND_ADDR_OFFSET and AARCH64_OPND_SM3_IMM2. (aarch64_insn_class): Add cryptosm3 and cryptosm4. (arch64_feature_set): Make uint64_t. opcodes/ * aarch64-asm.h (ins_addr_offset): New. * aarch64-asm.c (aarch64_ins_reglane): Add cryptosm3. (aarch64_ins_addr_offset): New. * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_addr_offset): New. * aarch64-dis.c (aarch64_ext_reglane): Add cryptosm3. (aarch64_ext_addr_offset): New. * aarch64-dis-2.c: Regenerate. * aarch64-opc.h (aarch64_field_kind): Add FLD_imm6_2, FLD_imm4_2 and FLD_SM3_imm2. * aarch64-opc.c (fields): Add FLD_imm6_2, FLD_imm4_2 and FLD_SM3_imm2. (operand_general_constraint_met_p): Add AARCH64_OPND_ADDR_OFFSET. (aarch64_print_operand): Add AARCH64_OPND_Va, AARCH64_OPND_SM3_IMM2, AARCH64_OPND_MASK, AARCH64_OPND_IMM_2 and AARCH64_OPND_ADDR_OFFSET. * aarch64-opc-2.c (Va, MASK, IMM_2, ADDR_OFFSET, SM3_IMM2): New. * aarch64-tbl.h (aarch64_opcode_table): Add Va, MASK, IMM_2, ADDR_OFFSET, SM3_IMM2.
2017-11-09Split the ARM Crypto ISA extensions for AES and SHA1+2 into their own ↵Tamar Christina
options (+aes and +sha2). The reason for the split is because with the introduction of Armv8.4-a the implementation of AES has explicitly been made independent of the implementation of the other crypto extensions. gas * config/tc-aarch64.c (aarch64_arch_option_table): Add armv8.4-a. (aarch64_features): Added SM4 and SHA3. include * opcode/aarch64.h: (AARCH64_FEATURE_V8_4, AARCH64_FEATURE_SM4): New. (AARCH64_ARCH_V8_4, AARCH64_FEATURE_SHA3): New. opcodes * aarch64-tbl.h (aarch64_feature_v8_4, aarch64_feature_crypto_v8_2): New. (aarch64_feature_sm4, aarch64_feature_sha3): New. (aarch64_feature_fp_16_v8_2): New. (ARMV8_4, SHA3, SM4, CRYPTO_V8_2, FP_F16_V8_2): New. (V8_4_INSN, CRYPTO_V8_2_INSN): New. (SHA3_INSN, SM4_INSN, FP16_V8_2_INSN): New.
2017-11-09Change the type of the aarch64_feature_set typedef to unsigned long long so ↵Nick Clifton
that it will work on 32-bit hosts. * opcode/aarch64.h (aarch64_feature_set): Change type to unsigned long long.
2017-11-08Split the AArch64 Crypto instructions for AES and SHA1+2 into their own ↵Nick Clifton
options (+aes and +sha2). The new options are: +aes: Enables the AES instructions of Armv8-a, enabled by default with +crypto. +sha2: Enables the SHA1 and SHA2 instructions of Armv8-a, enabled by default with +crypto. These options have been turned on by default when +crypto is used, as such no breakage is expected. The reason for the split is because with the introduction of Armv8.4-a the implementation of AES has explicitly been made independent of the implementation of the other crypto extensions. Backporting the split does not break any of the previous requirements and so is safe to do. gas * config/tc-aarch64.c (aarch64_features): Include AES and SHA2 in CRYPTO. Add SHA2 and AES. include * opcode/aarch64.h: (AARCH64_FEATURE_SHA2, AARCH64_FEATURE_AES): New. opcodes * aarch64-tbl.h (aarch64_feature_crypto): Add AES and SHA2. (aarch64_feature_sha2, aarch64_feature_aes): New. (SHA2, AES): New. (AES_INSN, SHA2_INSN): New. (pmull, pmull2, aese, aesd, aesmc, aesimc): Change to AES_INS. (sha1h, sha1su1, sha256su0, sha1c, sha1p, sha1m, sha1su0, sha256h, sha256h2, sha256su1): Change to SHA2_INS.
2017-11-08Adds command line support for Armv8.4-A, via the new command line option ↵Jiong Wang
-march=armv8.4-a. Add support for "+dotprod" ARM feature (required for ARMv8.4-A). Add assembler and disassembler support for new FP16 instructions introduced in Armv8.4-A gas * config/tc-arm.c (arm_extensions): (arm_archs): New entry for "armv8.4-a". Add FPU_ARCH_DOTPROD_NEON_VFP_ARMV8. (arm_ext_v8_2): New variable. (enum arm_reg_type): New enumeration REG_TYPE_NSD. (reg_expected_msgs): New entry for REG_TYPE_NSD. (parse_typed_reg_or_scalar): Handle REG_TYPE_NSD. (parse_scalar): Support REG_TYPE_VFS. (enum operand_parse_code): New enumerations OP_RNSD and OP_RNSD_RNSC. (parse_operands): Handle OP_RNSD and OP_RNSD_RNSC. (NEON_SHAPE_DEF): New entries for DHH and DHS. (neon_scalar_for_fmac_fp16_long): New function to generate Rm encoding for new FP16 instructions in ARMv8.2-A. (do_neon_fmac_maybe_scalar_long): New function to encode new FP16 instructions in ARMv8.2-A. (do_neon_vfmal): Wrapper function for vfmal. (do_neon_vfmsl): Wrapper function for vfmsl. (insns): New entries for vfmal and vfmsl. * doc/c-arm.texi (-march): Document "armv8.4-a". * testsuite/gas/arm/dotprod-mandatory.d: New test. * testsuite/gas/arm/armv8_2-a-fp16.s: New test source. * testsuite/gas/arm/armv8_2-a-fp16-illegal.s: New test source. * testsuite/gas/arm/armv8_2-a-fp16.d: New test. * testsuite/gas/arm/armv8_3-a-fp16.d: New test. * testsuite/gas/arm/armv8_4-a-fp16.d: New test. * testsuite/gas/arm/armv8_2-a-fp16-thumb2.d: New test. * testsuite/gas/arm/armv8_2-a-fp16-illegal.d: New test. * testsuite/gas/arm/armv8_2-a-fp16-illegal.l: New error file. opcodes * arm-dis.c (coprocessor_opcodes): New entries for ARMv8.2-A new FP16 instructions, including vfmal.f16 and vfmsl.f16. include * opcode/arm.h (ARM_AEXT2_V8_4A): Include Dot Product feature. (ARM_EXT2_V8_4A): New macro. (ARM_AEXT2_V8_4A): Likewise. (ARM_ARCH_V8_4A): Likewise.
2017-11-07RISC-V: Add satp as an alias for sptbrPalmer Dabbelt
The RISC-V privileged ISA changed the name of sptbr (Supervisor Page Table Base Register) to satp (Supervisor Address Translation and Protection) to reflect the fact it could be used for more than just paging. This patch adds an alias, as they're the same register. include/ChangeLog 2017-11-06 Palmer Dabbelt <palmer@dabbelt.com> * opcode/riscv-opc.h (sptbr): Rename to satp. (CSR_SPTBR): Rename to CSR_SATP. (sptbr): Alias to CSR_SATP. gas/ChangeLog 2017-11-06 Palmer Dabbelt <palmer@dabbelt.com> * testsuite/gas/riscv/satp.d: New test. testsuite/gas/riscv/satp.s: Likewise. testsuite/gas/riscv/riscv.exp: Likewise. config/tc-riscv.c (md_begin): Handle CSR aliases.
2017-11-07This patch similarly to the AArch64 one enables Dot Product support by ↵Tamar Christina
default for the Cortex-A55 and Cortex-A75 which have hardware support for these instructions. gas * config/tc-arm.c (arm_cpus): Change FPU_ARCH_CRYPTO_NEON_VFP_ARMV8 into FPU_ARCH_CRYPTO_NEON_VFP_ARMV8_DOTPROD. include * opcode/arm.h (FPU_ARCH_CRYPTO_NEON_VFP_ARMV8_DOTPROD): New macro.
2017-11-02aarch64: Remove AARCH64_FEATURE_F16 from AARCH64_ARCH_V8_2Siddhesh Poyarekar
The FP16 feature is optional in ARMv8.2, so it is wrong to add it to the default AARCH64_ARCH_V8_2 feature flags. This patch makes the behaviour consistent with that of gcc, which also does not assume FP16 for ARMv8.2. include/ * opcode/aarch64.h (AARCH64_ARCH_V8_2): Drop AARCH64_FEATURE_F16.
2017-10-25PR22348, conflicting global vars in crx and cr16Alan Modra
include/ PR 22348 * opcode/cr16.h (instruction): Delete. (cr16_words, cr16_allWords, cr16_currInsn): Delete. * opcode/crx.h (crx_cst4_map): Rename from cst4_map. (crx_cst4_maps): Rename from cst4_maps. (crx_no_op_insn): Rename from no_op_insn. (instruction): Delete. opcodes/ PR 22348 * cr16-dis.c (cr16_cinvs, instruction, cr16_currInsn): Make static. (cr16_words, cr16_allWords, processing_argument_number): Likewise. (imm4flag, size_changed): Likewise. * crx-dis.c (crx_cinvs, NUMCINVS, instruction, currInsn): Likewise. (words, allWords, processing_argument_number): Likewise. (cst4flag, size_changed): Likewise. * crx-opc.c (crx_cst4_map): Rename from cst4_map. (crx_cst4_maps): Rename from cst4_maps. (crx_no_op_insn): Rename from no_op_insn. gas/ PR 22348 * config/tc-crx.c (instruction, output_opcode): Make static. (relocatable, ins_parse, cur_arg_num): Likewise. (parse_insn): Adjust for renamed opcodes globals. (check_range): Likewise
2017-10-24RISC-V: Only relax to C.LUI when imm != 0 and rd != 0/2Andrew Waterman
This matches the ISA specification. This also adds two tests: one to make sure the assembler rejects invalid 'c.lui's, and one to make sure we only relax valid 'c.lui's. bfd/ChangeLog 2017-10-24 Andrew Waterman <andrew@sifive.com> * elfnn-riscv.c (_bfd_riscv_relax_lui): Don't relax to c.lui when rd is x0. include/ChangeLog 2017-10-24 Andrew Waterman <andrew@sifive.com> * opcode/riscv.h (VALID_RVC_LUI_IMM): c.lui can't load the immediate 0. gas/ChangeLog 2017-10-24 Andrew Waterman <andrew@sifive.com> * testsuite/gas/riscv/c-lui-fail.d: New testcase. gas/testsuite/gas/riscv/c-lui-fail.l: Likewise. gas/testsuite/gas/riscv/c-lui-fail.s: Likewise. gas/testsuite/gas/riscv/riscv.exp: Likewise. ld/ChangeLog 2017-10-24 Andrew Waterman <andrew@sifive.com> * ld/testsuite/ld-riscv-elf/c-lui.d: New testcase. ld/testsuite/ld-riscv-elf/c-lui.s: Likewise. ld/testsuite/ld-riscv-elf/ld-riscv-elf.exp: New test suite.
2017-10-12FT32: support for FT32B processor - part 1James Bowman
FT32B is a new FT32 family member. It has a code compression scheme, which requires the use of linker relaxations. The change is quite large, so submission is in several parts. Part 1 adds a 15-bit instruction field, and CPU-specific functions for the code compression that are used in binutils and GDB. bfd/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf32-ft32.c: Add HOWTO R_FT32_15. * reloc.c: Add BFD_RELOC_FT32_15. gas/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * config/tc-ft32.c (md_assemble): Replace FT32_FLD_K8 with K15. (md_apply_fix, tc_gen_reloc): Add BFD_RELOC_FT32_15. include/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * elf/ft32.h: Add R_FT32_15. * opcode/ft32.h: Replace FT32_FLD_K8 with K15. (ft32_shortcode, sc_compar, ft32_split_shortcode, ft32_merge_shortcode, ft32_merge_shortcode): New functions. opcodes/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * opcodes/ft32-dis.c (print_insn_ft32): Replace FT32_FLD_K8 with K15. * opcodes/ft32-opc.c (ft32_opc_info): Replace FT32_FLD_K8 with K15. Add jmpix pattern. sim/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * sim/ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
2017-09-11nds32: Rename __BIT() to N32_BIT().Kuan-Lin Chen
2017-08-24[PowerPC VLE] Add SPE2 and EFS2 instructions supportAlexander Fedotov
include/ * opcode/ppc.h: (spe2_opcodes, spe2_num_opcodes): New. (PPC_OPCODE_SPE2): New define. (PPC_OPCODE_EFS2): Likewise. (SPE2_XOP): Likewise. (SPE2_XOP_TO_SEG): Likewise. opcodes/ * ppc-dis.c (ppc_mopt): Add PPC_OPCODE_SPE2 and PPC_OPCODE_EFS2 flag to "e200z4" entry. New entries efs2 and spe2. Add PPC_OPCODE_SPE2 and PPC_OPCODE_EFS2 flag to "vle" entry. (SPE2_OPCD_SEGS): New macro. (spe2_opcd_indices): New. (disassemble_init_powerpc): Handle SPE2 opcodes. (lookup_spe2): New function. (print_insn_powerpc): call lookup_spe2. * ppc-opc.c (insert_evuimm1_ex0): New function. (extract_evuimm1_ex0): Likewise. (insert_evuimm_lt8): Likewise. (extract_evuimm_lt8): Likewise. (insert_off_spe2): Likewise. (extract_off_spe2): Likewise. (insert_Ddd): Likewise. (extract_Ddd): Likewise. (DD): New operand. (EVUIMM_LT8): Likewise. (EVUIMM_LT16): Adjust. (MMMM): New operand. (EVUIMM_1): Likewise. (EVUIMM_1_EX0): Likewise. (EVUIMM_2): Adjust. (NNN): New operand. (VX_OFF_SPE2): Likewise. (BBB): Likewise. (DDD): Likewise. (VX_MASK_DDD): New mask. (HH): New operand. (VX_RA_CONST): New macro. (VX_RA_CONST_MASK): Likewise. (VX_RB_CONST): Likewise. (VX_RB_CONST_MASK): Likewise. (VX_OFF_SPE2_MASK): Likewise. (VX_SPE_CRFD): Likewise. (VX_SPE_CRFD_MASK VX): Likewise. (VX_SPE2_CLR): Likewise. (VX_SPE2_CLR_MASK): Likewise. (VX_SPE2_SPLATB): Likewise. (VX_SPE2_SPLATB_MASK): Likewise. (VX_SPE2_OCTET): Likewise. (VX_SPE2_OCTET_MASK): Likewise. (VX_SPE2_DDHH): Likewise. (VX_SPE2_DDHH_MASK): Likewise. (VX_SPE2_HH): Likewise. (VX_SPE2_HH_MASK): Likewise. (VX_SPE2_EVMAR): Likewise. (VX_SPE2_EVMAR_MASK): Likewise. (PPCSPE2): Likewise. (PPCEFS2): Likewise. (vle_opcodes): Add EFS2 and some missing SPE opcodes. (powerpc_macros): Map old SPE instructions have new names with the same opcodes. Add SPE2 instructions which just are mapped to SPE2. (spe2_opcodes): Add SPE2 opcodes. gas/ * config/tc-ppc.c: (md_parse_option): Add mspe2 switch. (md_show_usage): Document -mspe2. (ppc_setup_opcodes): Handle spe2_opcodes. * doc/as.texinfo: Document -mspe2. * doc/c-ppc.texi: Likewise. * testsuite/gas/ppc/efs.d: New file. * testsuite/gas/ppc/efs.s: Likewise. * testsuite/gas/ppc/efs2.d: Likewise. * testsuite/gas/ppc/efs2.s: Likewise. * testsuite/gas/ppc/ppc.exp: Run new tests. * testsuite/gas/ppc/spe.d: New file. * testsuite/gas/ppc/spe.s: Likewise. * testsuite/gas/ppc/spe2-checks.d: Likewise. * testsuite/gas/ppc/spe2-checks.l: Likewise. * testsuite/gas/ppc/spe2-checks.s: Likewise. * testsuite/gas/ppc/spe2.d: Likewise. * testsuite/gas/ppc/spe2.s: Likewise. * testsuite/gas/ppc/spe_ambiguous.d: Likewise. * testsuite/gas/ppc/spe_ambiguous.s: Likewise.
2017-08-21[PowerPC VLE] Add LSP (Lightweight Signal Processing) instruction supportAlexander Fedotov
include/ * opcode/ppc.h (PPC_OPCODE_LSP): New define. opcodes/ * ppc-opc.c (insert_evuimm2_ex0): New function. (extract_evuimm2_ex0): Likewise. (insert_evuimm4_ex0): Likewise. (extract_evuimm4_ex0): Likewise. (insert_evuimm8_ex0): Likewise. (extract_evuimm8_ex0): Likewise. (insert_evuimm_lt16): Likewise. (extract_evuimm_lt16): Likewise. (insert_rD_rS_even): Likewise. (extract_rD_rS_even): Likewise. (insert_off_lsp): Likewise. (extract_off_lsp): Likewise. (RD_EVEN): New operand. (RS_EVEN): Likewise. (RSQ): Adjust. (EVUIMM_LT16): New operand. (HTM_SI): Adjust. (EVUIMM_2_EX0): New operand. (EVUIMM_4): Adjust. (EVUIMM_4_EX0): New operand. (EVUIMM_8): Adjust. (EVUIMM_8_EX0): New operand. (WS): Adjust. (VX_OFF): New operand. (VX_LSP): New macro. (VX_LSP_MASK): Likewise. (VX_LSP_OFF_MASK): Likewise. (PPC_OPCODE_LSP): Likewise. (vle_opcodes): Add LSP opcodes. * ppc-dis.c (ppc_mopt): Add PPC_OPCODE_LSP flag to "vle" entry. gas/ * testsuite/gas/ppc/lsp-checks.d, * testsuite/gas/ppc/lsp-checks.l, * testsuite/gas/ppc/lsp-checks.s: New test. * testsuite/gas/ppc/lsp.d, * testsuite/gas/ppc/lsp.s: New test. * testsuite/gas/ppc/ppc.exp: Run new tests.
2017-07-19[ARC] Add SJLI instruction.Claudiu Zissulescu
include/ 2017-07-19 Claudiu Zissulescu <claziss@synopsys.com> * opcode/arc.h (SJLI): Add. opcode/ 2017-07-19 Claudiu Zissulescu <claziss@synopsys.com> * arc-opc.c (extract_uimm12_20): New function. (UIMM12_20): New operand. (SIMM3_5_S): Adjust. * arc-tbl.h (sjli): Add new instruction.
2017-07-19[ARC] Add JLI support.John Eric Martin
The following relocation types were added to GCC/binutils: ARC_JLI_SECTOFF is a relocation type in Metaware that is now used by GCC as well to adjust the index of function calls to functions with attribute jli_call_always. bfd/ 2017-07-19 Claudiu Zissulescu <claziss@synopsys.com> John Eric Martin <John.Martin@emmicro-us.com> * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf32-arc.c (JLI): Define. * reloc.c: Add JLI relocations. gas/ 2017-07-19 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/jli-1.d: New file. * testsuite/gas/arc/jli-1.s: Likewise. * testsuite/gas/arc/taux.d: Update for jli_base. include/ 2017-07-19 Claudiu Zissulescu <claziss@synopsys.com> John Eric Martin <John.Martin@emmicro-us.com> * elf/arc-reloc.def: Add JLI relocs howto. * opcode/arc-func.h (replace_jli): New function. ld/ 2017-07-19 Claudiu Zissulescu <claziss@synopsys.com> John Eric Martin <John.Martin@emmicro-us.com> * emulparams/arcelf.sh (JLI_START_TABLE): Define. * scripttempl/elfarc.sc: Handle jlitab section. * scripttempl/elfarcv2.sc: Likewise. * testsuite/ld-arc/arc.exp: Add JLI test. * testsuite/ld-arc/jli-script.ld: New file. * testsuite/ld-arc/jli-simple.dd: Likewise. * testsuite/ld-arc/jli-simple.rd: Likewise. * testsuite/ld-arc/jli-simple.s: Likewise. * testsuite/ld/testsuite/ld-arc/jli-overflow.s: Likewise. * testsuite/ld/testsuite/ld-arc/jli-overflow.d: Likewise. * testsuite/ld/testsuite/ld-arc/jli-overflow.err: Likewise. opcode/ 2017-07-19 Claudiu Zissulescu <claziss@synopsys.com> John Eric Martin <John.Martin@emmicro-us.com> * arc-opc.c (UIMM10_6_S_JLIOFF): Define. (UIMM3_23): Adjust accordingly. * arc-regs.h: Add/correct jli_base register. * arc-tbl.h (jli_s): Likewise.
2017-07-18Fix spelling typos.Yuri Chornovian
2017-06-30Add support for a __gcc_isr pseudo isntruction to the AVR assembler.Georg-Johann Lay
PR gas/21683 include * opcode/avr.h (AVR_INSN): Add one for __gcc_isr. gas * doc/c-avr.texi (AVR Options) <-mgcc-isr>: Document it. (AVR Pseudo Instructions): New node. * config/tc-avr.h (md_pre_output_hook): Define to avr_pre_output_hook. (md_undefined_symbol): Define to avr_undefined_symbol. (avr_pre_output_hook, avr_undefined_symbol): New protos. * config/tc-avr.c (struc-symbol.h): Include it. (ISR_CHUNK_Done, ISR_CHUNK_Prologue, ISR_CHUNK_Epilogue): New enums. (avr_isr, avr_gccisr_opcode) (avr_no_sreg_hash, avr_no_sreg): New static variables. (avr_opt_s) <have_gccisr>: Add field. (avr_opt): Add initializer for have_gccisr. (enum options) <OPTION_HAVE_GCCISR>: Add enum. (md_longopts) <"mgcc-isr">: Add entry. (md_show_usage): Document -mgcc-isr. (md_parse_option) [OPTION_HAVE_GCCISR]: Handle it. (md_undefined_symbol): Remove. (avr_undefined_symbol, avr_pre_output_hook): New fuctions. (md_begin) <avr_no_sreg_hash, avr_gccisr_opcode>: Initialize them. (avr_operand) <pregno>: Add argument and set *pregno if function is called for a register constraint. [N]: Handle constraint. (avr_operands) <avr_operand>: Pass 5th parameter to calls. [avr_opt.have_gccisr]: Call avr_update_gccisr. Call avr_gccisr_operands instead of avr_operands. (avr_update_gccisr, avr_emit_insn, avr_patch_gccisr_frag) (avr_gccisr_operands, avr_check_gccisr_done): New static functions. * testsuite/gas/avr/gccisr-01.d: New test. * testsuite/gas/avr/gccisr-01.s: New test. * testsuite/gas/avr/gccisr-02.d: New test. * testsuite/gas/avr/gccisr-02.s: New test. * testsuite/gas/avr/gccisr-03.d: New test. * testsuite/gas/avr/gccisr-03.s: New test.
2017-06-30MIPS: Fix XPA base and Virtualization ASE instruction handlingMaciej W. Rozycki
Correct a commit 7d64c587c15f ("Add support for the MIPS eXtended Physical Address (XPA) ASE.") bug, causing XPA base and Virtualization ASE instructions to be wrongly always enabled with the selection of the MIPS32r2 or higher ISA. For example this source assembles successfully as shown below: $ cat xpa.s mfhc0 $2, $1 $ as -32 -mips32 -o xpa.o xpa.s xpa.s: Assembler messages: xpa.s:1: Error: opcode not supported on this processor: mips32 (mips32) `mfhc0 $2,$1' $ as -32 -mips32r2 -o xpa.o xpa.s $ objdump -d xpa.o xpa.o: file format elf32-tradbigmips Disassembly of section .text: 00000000 <.text>: 0: 40420800 mfhc0 v0,c0_random ... $ To address this issue remove the I33 (INSN_ISA32R2) marking from all XPA instructions in the opcode table. Additionally, for XPA Virtualization ASE instructions implement an XPAVZ (ASE_XPA_VIRT) combination ASE flag and use it in place of IVIRT|XPA (ASE_VIRT|ASE_XPA). Now the same source is correctly rejected unless the `-mxpa' option is also used: $ as -32 -mips32r2 -o xpa.o xpa.s xpa.s: Assembler messages: xpa.s:1: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mfhc0 $2,$1' $ as -32 -mips32r2 -mxpa -o xpa.o xpa.s $ Add test cases for XPA base and XPA Virtualization ASE instructions. Parts of this change by Andrew Bennett. include/ * opcode/mips.h (ASE_XPA_VIRT): New macro. opcodes/ * mips-dis.c (mips_calculate_combination_ases): Handle the ASE_XPA_VIRT flag. (parse_mips_ase_option): New function. (parse_mips_dis_option): Factor out ASE option handling to the new function. Call `mips_calculate_combination_ases'. * mips-opc.c (XPAVZ): New macro. (mips_builtin_opcodes): Correct ISA and ASE flags for "mfhc0", "mfhgc0", "mthc0" and "mthgc0". gas/ * config/tc-mips.c (mips_set_ase): Handle the ASE_XPA_VIRT flag. * testsuite/gas/mips/xpa.d: Remove `xpa' from `-M' in `objdump' flags. Add `-mvirt' to `as' flags. * testsuite/gas/mips/xpa-err.d: New test. * testsuite/gas/mips/xpa-virt-err.d: New test. * testsuite/gas/mips/xpa-err.l: New stderr output. * testsuite/gas/mips/xpa-virt-err.l: New stderr output. * testsuite/gas/mips/xpa-err.s: New test source. * testsuite/gas/mips/xpa-virt-err.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. binutils/ * testsuite/binutils-all/mips/mips-xpa-virt-1.d: New test. * testsuite/binutils-all/mips/mips-xpa-virt-2.d: New test. * testsuite/binutils-all/mips/mips-xpa-virt-3.d: New test. * testsuite/binutils-all/mips/mips-xpa-virt-4.d: New test. * testsuite/binutils-all/mips/mips-xpa-virt.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2017-06-28[AArch64] Add dot product support for AArch64 to binutilsTamar Christina
gas/ * config/tc-aarch64.c (aarch64_reg_parse_32_64): Accept 4B. (aarch64_features): Added dotprod. * doc/c-aarch64.texi: Added dotprod. * testsuite/gas/aarch64/dotproduct.d: New. * testsuite/gas/aarch64/dotproduct.s: New. opcodes/ * aarch64-asm.c (aarch64_ins_reglane): Added 4B dotprod. * aarch64-dis.c (aarch64_ext_reglane): Likewise. * aarch64-tbl.h (QL_V3DOT, QL_V2DOT): New. (aarch64_feature_dotprod, DOT_INSN): New. (udot, sdot): New. * aarch64-dis-2.c: Regenerated. include/ * opcode/aarch64.h: (AARCH64_FEATURE_DOTPROD): New. (aarch64_insn_class): Added dotprod.
2017-06-28[ARM] Assembler and disassembler support Dot Product ExtensionJiong Wang
This patch add assembler and disassembler support for new Dot Product Extension. The support can be enabled through the new "+dotprod" extension. include/ * opcode/arm.h (FPU_NEON_EXT_DOTPROD): New macro. (FPU_ARCH_DOTPROD_NEON_VFP_ARMV8): New macro. gas/ * config/tc-arm.c (fpu_neon_ext_dotprod): New variable. (neon_scalar_for_mul): Improve comments. (do_neon_dotproduct): New function to encode Dot Product instructions. (do_neon_dotproduct_s): Wrapper function for signed Dot Product instructions. (do_neon_dotproduct_u): Wrapper function for unsigned Dot Product instructions. (insns): New entries for vsdot and vudot. (arm_extensions): New entry for "dotprod". * doc/c-arm.texi: Document new "dotprod" extension. * testsuite/gas/arm/dotprod.s: New test source. * testsuite/gas/arm/dotprod-illegal.s: New test source. * testsuite/gas/arm/dotprod.d: New test. * testsuite/gas/arm/dotprod-thumb2.d: New test. * testsuite/gas/arm/dotprod-illegal.d: New test. * testsuite/gas/arm/dotprod-legacy-arch.d: New test. * testsuite/gas/arm/dotprod-illegal.l: New error file. * testsuite/gas/arm/dotprod-legacy-arch.l: New error file. opcodes/ * arm-dis.c (coprocessor_opcodes): New entries for vsdot and vudot.
2017-06-28MIPS: Add Imagination interAptiv MR2 MIPS32r3 processor supportMaciej W. Rozycki
Add support for the Imagination interAptiv MR2 MIPS32r3 processor with the MIPS16e2 ASE as per documentation, including in particular: 1. Support for implementation-specific interAptiv MR2 COPYW and UCOPYW MIPS16e2 instructions[1], for assembly and disassembly, 2. Support for implementation-specific interAptiv MR2 SAVE and RESTORE regular MIPS instructions[2], for assembly and disassembly, 3. ELF binary file annotation for the interAptiv MR2 MIPS architecture extension. 4. Support for interAptiv MR2 architecture selection for assembly, in the form of the `-march=interaptiv-mr2' command-line option and its corresponding `arch=interaptiv-mr2' setting for the `.set' and `.module' pseudo-ops. 5. Support for interAptiv MR2 architecture selection for disassembly, in the form of the `mips:interaptiv-mr2' target architecture, for use e.g. with the `-m' command-line option for `objdump'. Parts of this change by Matthew Fortune and Andrew Bennett. References: [1] "MIPS32 interAptiv Multiprocessing System Software User's Manual", Imagination Technologies Ltd., Document Number: MD00904, Revision 02.01, June 15, 2016, Section 24.3 "MIPS16e2 Implementation Specific Instructions", pp. 878-883 [2] same, Chapter 25 "Implementation-specific Instructions", pp. 911-917 include/ * elf/mips.h (E_MIPS_MACH_IAMR2): New macro. (AFL_EXT_INTERAPTIV_MR2): Likewise. * opcode/mips.h: Document new operand codes defined. (INSN_INTERAPTIV_MR2): New macro. (INSN_CHIP_MASK): Adjust accordingly. (CPU_INTERAPTIV_MR2): New macro. (cpu_is_member) <CPU_INTERAPTIV_MR2>: New case. (MIPS16_ALL_ARGS): Rename to... (MIPS_SVRS_ALL_ARGS): ... this. (MIPS16_ALL_STATICS): Rename to... (MIPS_SVRS_ALL_STATICS): ... this. bfd/ * archures.c (bfd_mach_mips_interaptiv_mr2): New macro. * cpu-mips.c (I_interaptiv_mr2): New enum value. (arch_info_struct): Add "mips:interaptiv-mr2" entry. * elfxx-mips.c (_bfd_elf_mips_mach) <E_MIPS_MACH_IAMR2>: New case. (mips_set_isa_flags) <bfd_mach_mips_interaptiv_mr2>: Likewise. (bfd_mips_isa_ext) <bfd_mach_mips_interaptiv_mr2>: Likewise. (print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise. (mips_mach_extensions): Add `bfd_mach_mipsisa32r3' and `bfd_mach_mips_interaptiv_mr2' entries. * bfd-in2.h: Regenerate. opcodes/ * mips-formats.h (INT_BIAS): New macro. (INT_ADJ): Redefine in INT_BIAS terms. * mips-dis.c (mips_arch_choices): Add "interaptiv-mr2" entry. (mips_print_save_restore): New function. (print_insn_arg) <OP_SAVE_RESTORE_LIST>: Update comment. (validate_insn_args) <OP_SAVE_RESTORE_LIST>: Remove `abort' call. (print_insn_args): Handle OP_SAVE_RESTORE_LIST. (print_mips16_insn_arg): Call `mips_print_save_restore' for OP_SAVE_RESTORE_LIST handling, factored out from here. * mips-opc.c (decode_mips_operand) <'-'> <'m'>: New case. (RD_31, RD_SP, WR_SP, MOD_SP, IAMR2): New macros. (mips_builtin_opcodes): Add "restore" and "save" entries. * mips16-opc.c (decode_mips16_operand) <'n', 'o'>: New cases. (IAMR2): New macro. (mips16_opcodes): Add "copyw" and "ucopyw" entries. binutils/ * readelf.c (get_machine_flags) <E_MIPS_MACH_IAMR2>: New case. (print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise. * NEWS: Mention Imagination interAptiv MR2 processor support. gas/ * config/tc-mips.c (validate_mips_insn): Handle OP_SAVE_RESTORE_LIST specially. (mips_encode_save_restore, mips16_encode_save_restore): New functions. (match_save_restore_list_operand): Factor out SAVE/RESTORE operand insertion into the instruction word or halfword to these new functions. (mips_cpu_info_table): Add "interaptiv-mr2" entry. * doc/c-mips.texi (MIPS Options): Add `interaptiv-mr2' to the `-march=' argument list.
2017-06-24[ARM] Add support for ARMv8-R in assembler and readelfThomas Preud'homme
=== Context === This patch is part of a patch series to add support for ARMv8-R architecture. Its purpose is to add support for ARMv8-R in GAS: instructions, build attributes and readelf. === Patch description === Although some differences exist for system registers, from GAS point of view ARMv8-R supports the same instructions as ARMv8-A Aarch32 state and a subset of its extensions. This patch therefore introduce a new feature bit to distinguish the availability of the pan, ras and rdma extensions between ARMv8-A and ARMv8-R and allow crypto, fp and simd extensions to be used by ARMv8-R. Most of the changes are then in the testsuite to (i) rename source files and error output to be shared between ARMv8-A and ARMv8-R, (ii) rename files with expected output for ARMv8-A build attributes and (iii) add new files with expected output for ARMv8-R build attributes. 2017-06-24 Thomas Preud'homme <thomas.preudhomme@arm.com> binutils/ * readelf.c (arm_attr_tag_CPU_arch): Fill value for ARMv8-R. gas/ * NEWS: Mention support for ARMv8-R architecture. * config/tc-arm.c (arm_archs): Add entry for ARMv8-R. (arm_extensions): Restrict pan, ras and rdma extension to ARMv8-A and make crypto, fp and simd extensions available to ARMv8-R. (cpu_arch_ver): Add entry for ARMv8-R. (aeabi_set_public_attributes): Update gas_assert for Tag_DIV_use logic. * testsuite/gas/arm/armv8-a+fp.s: Rename into ... * testsuite/gas/arm/armv8-ar+fp.s: This. Remove .arch directive. * testsuite/gas/arm/armv8-a+fp.d: Specify source to assemble and architecture to assemble for. * testsuite/gas/arm/armv8-r+fp.d: New. * testsuite/gas/arm/armv8-a+simd.s: Rename into ... * testsuite/gas/arm/armv8-ar+simd.s: This. Remove .arch directive. * testsuite/gas/arm/armv8-a+simd.d: Specify source to assemble and architecture to assemble for. * testsuite/gas/arm/armv8-r+simd.d: New. * testsuite/gas/arm/armv8-a-bad.s: Rename into ... * testsuite/gas/arm/armv8-ar-bad.s: This. Remove .arch directive. * testsuite/gas/arm/armv8-a-bad.l: Rename into ... * testsuite/gas/arm/armv8-ar-bad.l: This. Decrement line number by 1. * testsuite/gas/arm/armv8-a-bad.d: Specify source to assemble, architecture to assemble for and adjust error output file. * testsuite/gas/arm/armv8-r-bad.d: New. * testsuite/gas/arm/armv8-a-barrier.s: Rename into ... * testsuite/gas/arm/armv8-ar-barrier.s: This. * testsuite/gas/arm/armv8-a-barrier-arm.d: Adjust source. * testsuite/gas/arm/armv8-a-barrier-thumb.d: Likewise. * testsuite/gas/arm/armv8-r-barrier-arm.d: New. * testsuite/gas/arm/armv8-r-barrier-thumb.d: New. * testsuite/gas/arm/armv8-a-it-bad.s: Rename into ... * testsuite/gas/arm/armv8-ar-it-bad.s: This. Remove .arch directive. * testsuite/gas/arm/armv8-a-it-bad.l: Rename into ... * testsuite/gas/arm/armv8-ar-it-bad.l: This. Decrement line number by 1. * testsuite/gas/arm/armv8-a-it-bad.d: Specify source to assemble, architecture to assemble for and adjust error output file. * testsuite/gas/arm/armv8-r-it-bad.d: New. * testsuite/gas/arm/armv8-a.s: Rename into ... * testsuite/gas/arm/armv8-ar.s: This. Remove .arch directive. * testsuite/gas/arm/armv8-a.d: Specify source to assemble and architecture to assemble for. * testsuite/gas/arm/armv8-r.d: New. * testsuite/gas/arm/attr-march-armv8-r+crypto.d: New. * testsuite/gas/arm/attr-march-armv8-r+fp.d: New. * testsuite/gas/arm/attr-march-armv8-r+simd.d: New. * testsuite/gas/arm/attr-march-armv8-r.d: New. * testsuite/gas/arm/crc32.s: Rename into ... * testsuite/gas/arm/crc32-armv8-ar.s: This. * testsuite/gas/arm/crc32.d: Rename into ... * testsuite/gas/arm/crc32-armv8-a.d: This. Specify source to assemble. * testsuite/gas/arm/crc32-armv8-r.d: New. * testsuite/gas/arm/crc32-bad.s: Rename into ... * testsuite/gas/arm/crc32-armv8-ar-bad.s: This. * testsuite/gas/arm/crc32-bad.d: Rename into ... * testsuite/gas/arm/crc32-armv8-a-bad.d: This. Specify source to assemble. * testsuite/gas/arm/crc32-armv8-r-bad.d: New. * testsuite/gas/arm/mask_1.s: Rename into ... * testsuite/gas/arm/mask_1-armv8-ar.s: This. * testsuite/gas/arm/mask_1.d: Rename into ... * testsuite/gas/arm/mask_1-armv8-a.d: This. Specify source to assemble. * testsuite/gas/arm/mask_1-armv8-r.d: new. include/ * elf/arm.h (TAG_CPU_ARCH_V8R): New macro. * opcode/arm.h (ARM_EXT2_V8A): New macro. (ARM_AEXT2_V8A): Rename into ... (ARM_AEXT2_V8AR): This. (ARM_AEXT2_V8A): New macro. (ARM_AEXT_V8R): New macro. (ARM_AEXT2_V8R): New macro. (ARM_ARCH_V8R): New macro.
2017-06-24[ARM] Remove ARMv6S-M special casingThomas Preud'homme
=== Context === This patch is part of a patch series to add support for ARMv8-R architecture. Its purpose is to remove special casing for ARMv6S-M autodetection. === Motivation === Currently, SWI and SVC mnemonics are enabled for ARMv4T and successor architectures with extra checks in the handler function (do_t_swi) to give an error message when ARMv6-M is targeted and some more special casing in aeabi_set_public_attributes. This was made to exclude these mnemonics for ARMv6-M unless the OS extension is in use. However this logic is superfluous: there is already code to check whether an instruction is available based on the feature bit it is part of and whether the targeted architecture has that feature bit. This patch aims at removing that unneeded complexity. === Patch description === The OS extension is already limited to the ARMv6-M architecture so all this patch does is redefined availability of the ARM_EXT_OS feature bit to not be present for ARM_ARCH_V6M. ARM_ARCH_V6SM does not need any change either because it already includes ARM_EXT_OS. The patch also make sure that the error message that was given by do_t_swi when SWI/SVC is unavailable is still the same by detecting the situation in md_assemble. 2017-06-24 Thomas Preud'homme <thomas.preudhomme@arm.com> gas/ * config/tc-arm.c (arm_ext_v6m): Delete. (arm_ext_v7m): Delete. (arm_ext_m): Remove ARM_EXT_OS from the set of feature defined M profile. (arm_arch_v6m_only): Delete. (do_t_swi): Remove special case for ARMv6S-M. (md_assemble): Display error message previously in do_t_swi when SVC is not available. (insns): Guard swi and svc by arm_ext_os for Thumb mode. (aeabi_set_public_attributes): Remove special case for ARMv6S-M. include/ * opcode/arm.h (ARM_AEXT_V4TxM): Add ARM_EXT_OS bit to the set. (ARM_AEXT_V4T): Likewise. (ARM_AEXT_V5TxM): Likewise. (ARM_AEXT_V5T): Likewise. (ARM_AEXT_V6M): Mask off ARM_EXT_OS bit.
2017-06-21[ARM] Rework Tag_CPU_arch build attribute value selectionThomas Preud'homme
=== Context === This patch is part of a patch series to add support for ARMv8-R architecture. Its purpose is to rework the Tag_CPU_arch build attribute value selection to (i) match architecture or CPU if specified by user without any need for hack and (ii) match an architecture with all the features used if in autodetection mode or return an error. === Motivation === Currently, Tag_CPU_arch build attribute value selection assumes that an architecture is always a superset of architectures released earlier. As such, the logic is to browse architectures in chronological order of release and selecting the Tag_CPU_arch value of the last one to contribute a feature used[1]/requested[2] not contributed by earlier architectures. [1] in case of autodetection mode [2] otherwise, ie. in case of -mcpu/-march or associated directives This logic fails the two objectives mentionned in the Context section. First, due to the assumption it does an architecture can be selected while not having all the features used/requested which fails the second objective. Second, not doing an exact match when an architecture or CPU is selected by the user means the wrong value is chosen when a later architecture provides a subset of the feature bits of an earlier architecture. This is the case for the implementation of ARMv8-R (see later patch). An added benefit of this patch is that it is possible to easily generate more consistent build attribute by setting the feature bits from the architecture matched in aeabi_set_public_attributes in autodetection mode. This is better done as a separate patch because lots of testcase' expected results must then be updated accordingly. === Patch description === The patch changes the main logic for Tag_CPU_arch and Tag_CPU_arch_profile values selection to: - look for an exact match in case an architecture or CPU was specified on the command line or in a directive - select the first released architecture that provides a superset of the feature used in the autodetection case - select the most featureful architecture in case of -march=all The array cpu_arch_ver is updated to include all architectures in order to make the first point work. Note that when looking for an exact match, the architecture with selected extension is tried first and then only the architecture. This is because some architectures are exactly equivalent to an earlier architecture with its extensions selected. ARMv6S-M (= ARMv6-M + OS extension) and ARMv6KZ (ARMv6K + security extension) are two such examples. Other adjustments are also necessary in aeabi_set_public_attributes to make this change work. 1) The logic to set Tag_ARM_ISA_use and Tag_THUMB_ISA_use must check the absence of feature bit used/requested to decide whether to give the default value for empty files (see EABI attribute defaults test). It was previously checking that arch == 0 which would only happen if no feature bit could be matched by any architecture, ie there is no feature bit to match. 2) A fallback to a superset match must exist when no_cpu_selected () returns true. This is because aeabi_set_public_attributes is called again after relaxation and at this point selected_cpu is set from the previous execution of that function. There is therefore no way to check whether the user specified an architecture or CPU. 3) Tag_CPU_arch lines are removed from expected output when the detected architecture should be pre-ARMv4, since 0 is the Tag_CPU_arch value for pre-ARMv4 architectures and default value for an absent entry is 0. 2017-06-21 Thomas Preud'homme <thomas.preudhomme@arm.com> gas/ * config/tc-arm.c (fpu_any): Defined from FPU_ANY. (cpu_arch_ver): Add all architectures and sort by release date. (have_ext_for_needed_feat_p): New. (get_aeabi_cpu_arch_from_fset): New. (aeabi_set_public_attributes): Call above function to determine Tag_CPU_arch and Tag_CPU_arch_profile values. Adapt Tag_ARM_ISA_use and Tag_THUMB_ISA_use selection logic to check absence of feature bit accordingly. * testsuite/gas/arm/attr-march-armv1.d: Fix expected Tag_CPU_arch build attribute value. * testsuite/gas/arm/attr-march-armv2.d: Likewise. * testsuite/gas/arm/attr-march-armv2a.d: Likewise. * testsuite/gas/arm/attr-march-armv2s.d: Likewise. * testsuite/gas/arm/attr-march-armv3.d: Likewise. * testsuite/gas/arm/attr-march-armv3m.d: Likewise. * testsuite/gas/arm/pr12198-2.d: Likewise. include/ * opcode/arm.h (FPU_ANY): New macro.
2017-05-30S/390: Improve error checking for optional operandsAndreas Krebbel
So far we only had an instruction flag which made an arbitrary number of operands optional. This limits error checking capabilities for instructions marked that way. With this patch the optparm flag only allows a single optional parameter and another one is added (optparm2) allowing 2 optional arguments. Hopefully we won't need more than that in the future. So far there will be only a single use of optparm2. gas/ChangeLog: 2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * config/tc-s390.c (md_gather_operands): Support new optparm2 instruction flag. include/ChangeLog: 2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * opcode/s390.h: Add new instruction flags optparm2. opcodes/ChangeLog: 2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * s390-dis.c (s390_print_insn_with_opcode): Support new optparm2 instruction flag. * s390-mkopc.c (main): Recognize the new instruction flag when parsing instruction list.
2017-05-30S/390: Remove optional operand flag.Andreas Krebbel
The per operand optional flag hasn't been used for quite some time. Cleanup some remains. include/ChangeLog: 2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * opcode/s390.h: Remove S390_OPERAND_OPTIONAL. gas/ChangeLog: 2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * config/tc-s390.c (md_gather_operands): Remove code dealing with S390_OPERAND_OPTIONAL.
2017-05-23[ARC] Update MAX_INSN_FLGS.claziss
It is required to parse instructions like ldb.x.a.di. include/ 2017-05-23 Claudiu Zissulescu <claziss@synopsys.com> * opcode/arc.h (MAX_INSN_FLGS): Update to 4.
2017-05-22x86: Add NOTRACK prefix supportH.J. Lu
For register indirect branches, NOTRACK prefix (0x3e), which is also the DS segment register prefix, can be used to ignore the CET indirect branch track. gas/ * config/tc-i386.c (REX_PREFIX): Changed to 7. (NOTRACK_PREFIX): New. (MAX_PREFIXES): Changed to 8. (_i386_insn): Add notrack_prefix. (PREFIX_GROUP): Add PREFIX_DS. (add_prefix): Return PREFIX_DS for DS_PREFIX_OPCODE. (md_assemble): Check if NOTRACK prefix is supported. (parse_insn): Set notrack_prefix and issue an error for other prefixes after NOTRACK prefix. * testsuite/gas/i386/i386.exp: Run tests for NOTRACK prefix. * testsuite/gas/i386/notrack-intel.d: New file. * testsuite/gas/i386/notrack.d: Likewise. * testsuite/gas/i386/notrack.s: Likewise. * testsuite/gas/i386/notrackbad.l: Likewise. * testsuite/gas/i386/notrackbad.s: Likewise. * testsuite/gas/i386/x86-64-notrack-intel.d: Likewise. * testsuite/gas/i386/x86-64-notrack.d: Likewise. * testsuite/gas/i386/x86-64-notrack.s: Likewise. * testsuite/gas/i386/x86-64-notrackbad.l: Likewise. * testsuite/gas/i386/x86-64-notrackbad.s: Likewise. include/ * include/opcode/i386.h (NOTRACK_PREFIX_OPCODE): New. opcodes/ * i386-dis.c (NOTRACK_Fixup): New. (NOTRACK): Likewise. (NOTRACK_PREFIX): Likewise. (last_active_prefix): Likewise. (reg_table): Use NOTRACK on indirect call and jmp. (ckprefix): Set last_active_prefix. (prefix_name): Return "notrack" for NOTRACK_PREFIX. * i386-gen.c (opcode_modifiers): Add NoTrackPrefixOk. * i386-opc.h (NoTrackPrefixOk): New. (i386_opcode_modifier): Add notrackprefixok. * i386-opc.tbl: Add NoTrackPrefixOk to indirect call and jmp. Add notrack. * i386-tbl.h: Regenerated.
2017-05-19binutils: support for the SPARC M8 processorJose E. Marchesi
This patch adds support for the new SPARC M8 processor (implementing OSA 2017) to binutils. New instructions: - Dictionary Unpack + dictunpack - Partitioned Compare with shifted result + Signed variants: fpcmp{le,gt,eq,ne}{8,16,32}shl + Unsigned variants: fpcmpu{le,gt}{8,16,32}shl - Partitioned Dual-Equal compared, with shifted result + fpcmpde{8,16,32}shl - Partitioned Unsigned Range Compare, with shifted result + fpcmpur{8,16,32}shl - 64-bit shifts on Floating-Point registers + fps{ll,ra,rl}64x - Misaligned loads and stores + ldm{sh,uh,sw,uw,x,ux} + ldm{sh,uh,sw,uw,x,ux}a + ldmf{s,d} + ldmf{s,d}a + stm{h,w,x} + stm{h,w,x}a + stmf{s,d} + stmf{s,d}a - Oracle Numbers + on{add,sub,mul,div} - Reverse Bytes/Bits + revbitsb + revbytes{h,w,x} - Run-Length instructions + rle_burst + rle_length - New crypto instructions + sha3 - Instruction to read the new register %entropy + rd %entropy New Alternate Address Identifiers: - 0x24, #ASI_CORE_COMMIT_COUNT - 0x24, #ASI_CORE_SELECT_COUNT - 0x48, #ASI_ARF_ECC_REG - 0x53, #ASI_ITLB_PROBE - 0x58, #ASI_DSFAR - 0x5a, #ASI_DTLB_PROBE_PRIMARY - 0x5b, #ASI_DTLB_PROBE_REAL - 0x64, #ASI_CORE_SELECT_COMMIT_NHT The new assembler command-line options for selecting the M8 architecture are: -Av9m8 or -Asparc6 for 64-bit binaries. -Av8plusm8 for 32-bit (v8+) binaries. The corresponding disassembler command-line options are: -msparc:v9m8 for 64-bit binaries. -msparc:v8plusm8 for 32-bit (v8+) binaries. Tested for regressions in the following targets: sparc-aout sparc-linux sparc-vxworks sparc64-linux bfd/ChangeLog: 2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com> * archures.c (bfd_mach_sparc_v9m8): Define. (bfd_mach_sparc_v8plusm8): Likewise. (bfd_mach_sparc_v9_p): Adjust to M8. (bfd_mach_sparc_64bit_p): Likewise. * aoutx.h (machine_type): Handle bfd_mach_sparc_v9m8 and bfd_mach_sparc_v8plusm8. * bfd-in2.h: Regenerated. * cpu-sparc.c (arch_info_struct): Entries for sparc:v9m8 and sparc:v8plusm8. * elfxx-sparc.c (_bfd_sparc_elf_object_p): Handle bfd_mach_sparc_v8plusm8 and bfd_mach_sparc_v9m8 using the new hw capabilities ONADDSUB, ONMUL, ONDIV, DICTUNP, FPCPSHL, RLE and SHA3. * elf32-sparc.c (elf32_sparc_final_write_processing): Handle bfd_mach_sparc_v8plusm8. binutils/ChangeLog: 2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com> * NEWS: Mention the SPARC M8 support. gas/ChangeLog: 2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com> * config/tc-sparc.c (sparc_arch_table): Entries for `sparc6', `v9m8' and `v8plusm8'. (sparc_md_end): Handle SPARC_OPCODE_ARCH_M8. (get_hwcap_name): Support the M8 hardware capabilities. (sparc_ip): Handle new operand types. * doc/c-sparc.texi (Sparc-Opts): Document -Av9m8, -Av8plusm8 and -Asparc6, and the corresponding -xarch aliases. * testsuite/gas/sparc/sparc6.s: New file. * testsuite/gas/sparc/sparc6.d: Likewise. * testsuite/gas/sparc/sparc6-diag.s: Likewise. * testsuite/gas/sparc/sparc6-diag.l: Likewise. * testsuite/gas/sparc/fpcmpshl.s: Likewise. * testsuite/gas/sparc/fpcmpshl.d: Likewise. * testsuite/gas/sparc/fpcmpshl-diag.s: Likewise. * testsuite/gas/sparc/fpcmpshl-diag.l: Likewise. * testsuite/gas/sparc/ldm-stm.s: Likewise. * testsuite/gas/sparc/ldm-stm.d: Likewise. * testsuite/gas/sparc/ldm-stm-diag.s: Likewise. * testsuite/gas/sparc/ldm-stm-diag.l: Likewise. * testsuite/gas/sparc/ldmf-stmf.s: Likewise. * testsuite/gas/sparc/ldmf-stmf.d: Likewise. * testsuite/gas/sparc/ldmf-stmf-diag.s: Likewise. * testsuite/gas/sparc/ldmf-stmf-diag.l: Likewise. * testsuite/gas/sparc/on.s: Likewise. * testsuite/gas/sparc/on.d: Likewise. * testsuite/gas/sparc/on-diag.s: Likewise. * testsuite/gas/sparc/on-diag.l: Likewise. * testsuite/gas/sparc/rle.s: Likewise. * testsuite/gas/sparc/rle.d: Likewise. * testsuite/gas/sparc/sparc.exp (gas_64_check): Run new tests. * testsuite/gas/sparc/rdasr.s: Add test for RDENTROPY. * testsuite/gas/sparc/rdasr.d: Likewise. include/ChangeLog: 2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com> * elf/sparc.h (ELF_SPARC_HWCAP2_SPARC6): Define. (ELF_SPARC_HWCAP2_ONADDSUB): Likewise. (ELF_SPARC_HWCAP2_ONMUL): Likewise. (ELF_SPARC_HWCAP2_ONDIV): Likewise. (ELF_SPARC_HWCAP2_DICTUNP): Likewise. (ELF_SPARC_HWCAP2_FPCMPSHL): Likewise. (ELF_SPARC_HWCAP2_RLE): Likewise. (ELF_SPARC_HWCAP2_SHA3): Likewise. * opcode/sparc.h (sparc_opcode_arch_val): Add SPARC_OPCODE_ARCH_M8 and adjust SPARC_OPCODE_ARCH_MAX. (HWCAP2_SPARC6): Define. (HWCAP2_ONADDSUB): Likewise. (HWCAP2_ONMUL): Likewise. (HWCAP2_ONDIV): Likewise. (HWCAP2_DICTUNP): Likewise. (HWCAP2_FPCMPSHL): Likewise. (HWCAP2_RLE): Likewise. (HWCAP2_SHA3): Likewise. (OPM): Likewise. (OPMI): Likewise. (ONFCN): Likewise. (REVFCN): Likewise. (SIMM10): Likewise. opcodes/ChangeLog: 2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc-dis.c (MASK_V9): Include SPARC_OPCODE_ARCH_M8. (X_IMM2): Define. (compute_arch_mask): Handle bfd_mach_sparc_v8plusm8 and bfd_mach_sparc_v9m8. (print_insn_sparc): Handle new operand types. * sparc-opc.c (MASK_M8): Define. (v6): Add MASK_M8. (v6notlet): Likewise. (v7): Likewise. (v8): Likewise. (v9): Likewise. (v9a): Likewise. (v9b): Likewise. (v9c): Likewise. (v9d): Likewise. (v9e): Likewise. (v9v): Likewise. (v9m): Likewise. (v9andleon): Likewise. (m8): Define. (HWS_VM8): Define. (HWS2_VM8): Likewise. (sparc_opcode_archs): Add entry for "m8". (sparc_opcodes): Add OSA2017 and M8 instructions dictunpack, fpcmp{ule,ugt,eq,ne,de,ur}{8,16,32}shl, fpx{ll,ra,rl}64x, ldm{sh,uh,sw,uw,x,ux}, ldm{sh,uh,sw,uw,x,ux}a, ldmf{s,d}, ldmf{s,d}a, on{add,sub,mul,div}, rdentropy, revbitsb, revbytes{h,w,x}, rle_burst, rle_length, sha3, stm{h,w,x}, stm{h,w,x}a, stmf{s,d}, stmf{s,d}a. (asi_table): New M8 ASIs ASI_CORE_COMMIT_COUNT, ASI_CORE_SELECT_COUNT, ASI_ARF_ECC_REG, ASI_ITLB_PROBE, ASI_DSFAR, ASI_DTLB_PROBE_PRIMARY, ASI_DTLB_PROBE_REAL, ASI_CORE_SELECT_COMMIT_NHT.
2017-05-15MIPS16e2: Add MIPS16e2 ASE supportMaciej W. Rozycki
Add MIPS16e2 ASE support as per the architecture specification[1], including in particular: 1. A new ELF ASE flag to mark MIPS16e2 binaries. 2. MIPS16e2 instruction assembly support, including a relaxation update to use LUI rather than an LI/SLL instruction pair for loading the high part of 32-bit addresses. 3. MIPS16e2 instruction disassembly support, including updated rules for extended forms of instructions that are now subdecoded and therefore do not alias to the original MIPS16 ISA revision instructions even for encodings that are not valid in the MIPS16e2 instruction set. Add `-mmips16e2' and `-mno-mips16e2' GAS command-line options and their corresponding `mips16e2' and `no-mips16e2' settings for the `.set' and `.module' pseudo-ops. Control the availability of the MT ASE subset of the MIPS16e2 instruction set with a combination of these controls and the preexisting MT ASE controls. Parts of this change by Matthew Fortune and Andrew Bennett. References: [1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific Extension Technical Reference Manual", Imagination Technologies Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016 include/ * elf/mips.h (AFL_ASE_MIPS16E2): New macro. (AFL_ASE_MASK): Adjust accordingly. * opcode/mips.h: Document new operand codes defined. (mips_operand_type): Add OP_REG28 enum value. (INSN2_SHORT_ONLY): Update description. (ASE_MIPS16E2, ASE_MIPS16E2_MT): New macros. bfd/ * elfxx-mips.c (print_mips_ases): Handle MIPS16e2 ASE. opcodes/ * mips-dis.c (mips_arch_choices): Add ASE_MIPS16E2 and ASE_MIPS16E2_MT flags to the unnamed MIPS16 entry. (mips_convert_abiflags_ases): Handle the AFL_ASE_MIPS16E2 flag. (print_insn_arg) <OP_REG28>: Add handler. (validate_insn_args) <OP_REG28>: Handle. (print_mips16_insn_arg): Handle MIPS16 instructions that require 32-bit encoding and 9-bit immediates. (print_insn_mips16): Handle MIPS16 instructions that require 32-bit encoding and MFC0/MTC0 operand decoding. * mips16-opc.c (decode_mips16_operand) <'>', '9', 'G', 'N', 'O'> <'Q', 'T', 'b', 'c', 'd', 'r', 'u'>: Add handlers. (RD_C0, WR_C0, E2, E2MT): New macros. (mips16_opcodes): Add entries for MIPS16e2 instructions: GP-relative "addiu" and its "addu" spelling, "andi", "cache", "di", "ehb", "ei", "ext", "ins", GP-relative "lb", "lbu", "lh", "lhu", and "lw" instructions, "ll", "lui", "lwl", "lwr", "mfc0", "movn", "movtn", "movtz", "movz", "mtc0", "ori", "pause", "pref", "rdhwr", "sc", GP-relative "sb", "sh" and "sw" instructions, "swl", "swr", "sync" and its "sync_acquire", "sync_mb", "sync_release", "sync_rmb" and "sync_wmb" aliases, "xori", "dmt", "dvpe", "emt" and "evpe". Add split regular/extended entries for original MIPS16 ISA revision instructions whose extended forms are subdecoded in the MIPS16e2 ISA revision: "li", "sll" and "srl". binutils/ * readelf.c (print_mips_ases): Handle MIPS16e2 ASE. * NEWS: Mention MIPS16e2 ASE support. gas/ * config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `e2' flag. (RELAX_MIPS16_E2): New macro. (RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO) (RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT) (RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT) (RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED) (RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED) (RELAX_MIPS16_MARK_ALWAYS_EXTENDED) (RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED, RELAX_MIPS16_MACRO) (RELAX_MIPS16_MARK_MACRO, RELAX_MIPS16_CLEAR_MACRO): Shift bits. (mips16_immed_extend): New prototype. (options): Add OPTION_MIPS16E2 and OPTION_NO_MIPS16E2 enum values. (md_longopts): Add "mmips16e2" and "mno-mips16e2" options. (mips_ases): Add "mips16e2" entry. (mips_set_ase): Handle MIPS16e2 ASE. (insn_insert_operand): Explicitly handle immediates with MIPS16 instructions that require 32-bit encoding. (is_opcode_valid_16): Pass enabled ASE bitmask on to `opcode_is_member'. (validate_mips_insn): Explicitly handle immediates with MIPS16 instructions that require 32-bit encoding. (operand_reg_mask) <OP_REG28>: Add handler. (match_reg28_operand): New function. (match_operand) <OP_REG28>: Add handler. (append_insn): Pass ASE_MIPS16E2 setting to RELAX_MIPS16_ENCODE. (match_mips16_insn): Handle MIPS16 instructions that require 32-bit encoding and `V' and `u' operand codes. (mips16_ip): Allow any characters except from `.' in opcodes. (mips16_immed_extend): Handle 9-bit immediates. Do not shuffle immediates whose width is not one of these listed. (md_estimate_size_before_relax): Handle MIPS16e2 relaxation. (mips_relax_frag): Likewise. (md_convert_frag): Likewise. (mips_convert_ase_flags): Handle MIPS16e2 ASE. * doc/as.texinfo (Target MIPS options): Add `-mmips16e2' and `-mno-mips16e2' options. (-mmips16e2, -mno-mips16e2): New options. * doc/c-mips.texi (MIPS Options): Add `-mmips16e2' and `-mno-mips16e2' options. (MIPS ASE Instruction Generation Overrides): Add `.set mips16e2' and `.set nomips16e2'.
2017-05-14Fix match and mask for 64-bit bb opcode.John David Anglin
2017-05-10[ARC] Object attributes.Claudiu Zissulescu
gas/ 2017-05-10 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/attr-arc600.d: New file. * testsuite/gas/arc/attr-arc600_mul32x16.d: Likewise. * testsuite/gas/arc/attr-arc600_norm.d: Likewise. * testsuite/gas/arc/attr-arc601.d: Likewise. * testsuite/gas/arc/attr-arc601_mul32x16.d: Likewise. * testsuite/gas/arc/attr-arc601_mul64.d: Likewise. * testsuite/gas/arc/attr-arc601_norm.d: Likewise. * testsuite/gas/arc/attr-arc700.d: Likewise. * testsuite/gas/arc/attr-arcem.d: Likewise. * testsuite/gas/arc/attr-archs.d: Likewise. * testsuite/gas/arc/attr-autodetect-1.d: Likewise. * testsuite/gas/arc/attr-autodetect-1.s: Likewise. * testsuite/gas/arc/attr-cpu-a601.d: Likewise. * testsuite/gas/arc/attr-cpu-a601.s: Likewise. * testsuite/gas/arc/attr-cpu-a700.d: Likewise. * testsuite/gas/arc/attr-cpu-a700.s: Likewise. * testsuite/gas/arc/attr-cpu-em.d: Likewise. * testsuite/gas/arc/attr-cpu-em.s: Likewise. * testsuite/gas/arc/attr-cpu-hs.d: Likewise. * testsuite/gas/arc/attr-cpu-hs.s: Likewise. * testsuite/gas/arc/attr-em.d: Likewise. * testsuite/gas/arc/attr-em4.d: Likewise. * testsuite/gas/arc/attr-em4_dmips.d: Likewise. * testsuite/gas/arc/attr-em4_fpuda.d: Likewise. * testsuite/gas/arc/attr-em4_fpus.d: Likewise. * testsuite/gas/arc/attr-hs.d: Likewise. * testsuite/gas/arc/attr-hs34.d: Likewise. * testsuite/gas/arc/attr-hs38.d: Likewise. * testsuite/gas/arc/attr-hs38_linux.d: Likewise. * testsuite/gas/arc/attr-mul64.d: Likewise. * testsuite/gas/arc/attr-name.d: Likewise. * testsuite/gas/arc/attr-name.s: Likewise. * testsuite/gas/arc/attr-nps400.d: Likewise. * testsuite/gas/arc/attr-override-mcpu.d: Likewise. * testsuite/gas/arc/attr-override-mcpu.s * testsuite/gas/arc/attr-quarkse_em.d: Likewise. * testsuite/gas/arc/blank.s: Likewise. * testsuite/gas/elf/section2.e-arc: Likewise. * testsuite/gas/arc/cpu-pseudop-1.d: Update test. * testsuite/gas/arc/cpu-pseudop-2.d: Likewise. * testsuite/gas/arc/nps400-0.d: Likewise. * testsuite/gas/elf/elf.exp: Set target_machine for ARC. * config/tc-arc.c (opcode/arc-attrs.h): Include. (ARC_GET_FLAG, ARC_SET_FLAG, streq): Define. (arc_attribute): Declare new function. (md_pseudo_table): Add arc_attribute. (cpu_types): Rename default cpu features. (selected_cpu): Set the default OSABI flag. (mpy_option): New variable. (pic_option): Likewise. (sda_option): Likewise. (tls_option): Likewise. (feature_type, feature_list): Remove. (arc_initial_eflag): Likewise. (attributes_set_explicitly): New variable. (arc_check_feature): Check also for the conflicting features. (arc_select_cpu): Refactor assignment of selected_cpu.eflags. (arc_option): Remove setting of private flags and architecture. (check_cpu_feature): Refactor feature names. (autodetect_attributes): New function. (assemble_tokens): Use above function. (md_parse_option): Refactor feature names. (arc_attribute): New function. (arc_set_attribute_int): Likewise. (arc_set_attribute_string): Likewise. (arc_stralloc): Likewise. (arc_set_public_attributes): Likewise. (arc_md_end): Likewise. (arc_copy_symbol_attributes): Likewise. (rc_convert_symbolic_attribute): Likewise. * config/tc-arc.h (md_end): Define. (CONVERT_SYMBOLIC_ATTRIBUTE): Likewise. (TC_COPY_SYMBOL_ATTRIBUTES): Likewise. * doc/c-arc.texi: Document ARC object attributes. binutils/ 2017-05-10 Claudiu Zissulescu <claziss@synopsys.com> * readelf.c (decode_ARC_machine_flags): Recognize OSABI v4. (get_arc_section_type_name): New function. (get_section_type_name): Use the above function. (display_arc_attribute): New function. (process_arc_specific): Likewise. (process_arch_specific): Handle ARC specific information. * testsuite/binutils-all/strip-3.d: Consider ARC.attributes section. include/ 2017-05-10 Claudiu Zissulescu <claziss@synopsys.com> * elf/arc.h (SHT_ARC_ATTRIBUTES): Define. (Tag_ARC_*): Define. (E_ARC_OSABI_V4): Define. (E_ARC_OSABI_CURRENT): Reassign it. (TAG_CPU_*): Define. * opcode/arc-attrs.h: New file. * opcode/arc.h (insn_subclass_t): Assign enum values. (insn_subclass_t): Update enum with QUARKSE1, QUARKSE2, and LL64. (ARC_EA, ARC_CD, ARC_LLOCK, ARC_ATOMIC, ARC_MPY, ARC_MULT) (ARC_NPS400, ARC_DPFP, ARC_SPFP, ARC_FPU, ARC_FPUDA, ARC_SWAP) (ARC_NORM, ARC_BSCAN, ARC_UIX, ARC_TSTAMP, ARC_VBFDW) (ARC_BARREL, ARC_DSPA, ARC_SHIFT, ARC_INTR, ARC_DIV, ARC_XMAC) (ARC_CRC): Delete. bfd/ 2017-05-10 Claudiu Zissulescu <claziss@synopsys.com> * elf32-arc.c (FEATURE_LIST_NAME): Define. (CONFLICT_LIST): Likewise. (opcode/arc-attrs.h): Include. (arc_elf_print_private_bfd_data): Print OSABI v4 flag. (arc_extract_features): New file. (arc_stralloc): Likewise. (arc_elf_merge_attributes): Likewise. (arc_elf_merge_private_bfd_data): Use object attributes. (bfd_arc_get_mach_from_attributes): New function. (arc_elf_object_p): Use object attributes. (arc_elf_final_write_processing): Likewise. (elf32_arc_obj_attrs_arg_type): New function. (elf32_arc_obj_attrs_handle_unknown): Likewise. (elf32_arc_section_from_shdr): Likewise. (elf_backend_obj_attrs_vendor): Define. (elf_backend_obj_attrs_section): Likewise. (elf_backend_obj_attrs_arg_type): Likewise. (elf_backend_obj_attrs_section_type): Likewise. (elf_backend_obj_attrs_handle_unknown): Likewise. (elf_backend_section_from_shdr): Likewise. ld/ 2017-05-10 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/ld-arc/attr-merge-0.d: New file. * testsuite/ld-arc/attr-merge-0.s: Likewise. * testsuite/ld-arc/attr-merge-0e.s: Likewise. * testsuite/ld-arc/attr-merge-1.d: Likewise. * testsuite/ld-arc/attr-merge-1.s: Likewise. * testsuite/ld-arc/attr-merge-1e.s: Likewise. * testsuite/ld-arc/attr-merge-2.d: Likewise. * testsuite/ld-arc/attr-merge-2.s: Likewise. * testsuite/ld-arc/attr-merge-3.d: Likewise. * testsuite/ld-arc/attr-merge-3.s: Likewise. * testsuite/ld-arc/attr-merge-3e.s: Likewise. * testsuite/ld-arc/attr-merge-4.s: Likewise. * testsuite/ld-arc/attr-merge-5.d: Likewise. * testsuite/ld-arc/attr-merge-5a.s: Likewise. * testsuite/ld-arc/attr-merge-5b.s: Likewise. * testsuite/ld-arc/attr-merge-conflict-isa.d: Likewise. * testsuite/ld-arc/attr-merge-err-isa.d: Likewise. * testsuite/ld-arc/attr-merge-incompatible-cpu.d: Likewise. * testsuite/ld-arc/got-01.d: Update test. * testsuite/ld-arc/attr-merge-err-quarkse.d: New file. * testsuite/ld-arc/attr-quarkse.s: Likewise. * testsuite/ld-arc/attr-quarkse2.s: Likewise. opcodes/ 2017-05-10 Claudiu Zissulescu <claziss@synopsys.com> * arc-dis.c (parse_option): Update quarkse_em option.. * arc-ext-tbl.h (dsp_fp_flt2i, dsp_fp_i2flt): Change subclass to QUARKSE1. (dsp_fp_div, dsp_fp_cmp): Change subclass to QUARKSE2.
2017-04-11Reorder PPC_OPCODE_* and set PPC_OPCODE_TMR for e6500Alan Modra
PPC_OPCODE_* renumbered to fill the gaps left by previous patches, and reordered chronologically just because. I kept PPC_OPCODE_TMR because presumably it might be used in future APUinfo for e6500. include/ * opcode/ppc.h (PPC_OPCODE_*): Renumber and order chronologically. (PPC_OPCODE_SPE): Comment on this and other bits used for APUinfo. opcodes/ * ppc-dis.c (ppc_opts): Formatting. Set PPC_OPCODE_TMR for e6500. * ppc-opc.c (powerpc_opcodes <mftmr, mttmr>): Remove now unnecessary E6500.
2017-04-11Bye bye PPC_OPCODE_HTM and -mhtmAlan Modra
The -mhtm option is fairly useless too. include/ * opcode/ppc.h (PPC_OPCODE_HTM): Delete. gas/ * config/tc-ppc.c (md_show_usage): Delete mention of -mhtm. * testsuite/gas/ppc/htm.d: Pass -mpower8 and -Mpower8. opcodes/ * ppc-dis.c (ppc_opts): Remove PPC_OPCODE_HTM and "htm". * ppc-opc.c (PPCHTM): Define as PPC_OPCODE_POWER8.
2017-04-11Bye Bye PPC_OPCODE_VSX3Alan Modra
This bit is also useless as it can be replaced with PPC_OPCODE_POWER9. Defining the VSX2 and VSX3 selection based on cpu bits also lets the assembler/disassembler distinguish between the power7 VSX opcodes and the power8 ones. Note that this change means -mvsx now reverts back to just adding the power7 VSX insns. include/ * opcode/ppc.h (PPC_OPCODE_VSX3): Delete. opcodes/ * ppc-dis.c (ppc_opts): Remove PPC_OPCODE_VSX3. * ppc-opc.c (PPCVSX2): Define as PPC_OPCODE_POWER8. (PPCVSX3): Define as PPC_OPCODE_POWER9.
2017-04-11Bye bye PPC_OPCODE_ALTIVEC2Alan Modra
This bit is worse than useless. Using it prevents the assembler and disassembler distinguishing between opcodes added for power8 and those added for power9. include/ * opcode/ppc.h (PPC_OPCODE_ALTIVEC2): Delete. opcodes/ * ppc-dis.c (ppc_opts): Remove PPC_OPCODE_ALTIVEC2. * ppc-opc.c (PPCVEC2): Define as PPC_OPCODE_POWER8|PPC_OPCODE_E6500. (PPCVEC3): Define as PPC_OPCODE_POWER9.
2017-03-31RISC-V: Add physical memory protection CSRsAndrew Waterman
2017-03-27 Andrew Waterman <andrew@sifive.com> * opcode/riscv-opc.h (CSR_PMPCFG0): New define. (CSR_PMPCFG1): Likewise. (CSR_PMPCFG2): Likewise. (CSR_PMPCFG3): Likewise. (CSR_PMPADDR0): Likewise. (CSR_PMPADDR1): Likewise. (CSR_PMPADDR2): Likewise. (CSR_PMPADDR3): Likewise. (CSR_PMPADDR4): Likewise. (CSR_PMPADDR5): Likewise. (CSR_PMPADDR6): Likewise. (CSR_PMPADDR7): Likewise. (CSR_PMPADDR8): Likewise. (CSR_PMPADDR9): Likewise. (CSR_PMPADDR10): Likewise. (CSR_PMPADDR11): Likewise. (CSR_PMPADDR12): Likewise. (CSR_PMPADDR13): Likewise. (CSR_PMPADDR14): Likewise. (CSR_PMPADDR15): Likewise. (pmpcfg0): Declare register. (pmpcfg1): Likewise. (pmpcfg2): Likewise. (pmpcfg3): Likewise. (pmpaddr0): Likewise. (pmpaddr1): Likewise. (pmpaddr2): Likewise. (pmpaddr3): Likewise. (pmpaddr4): Likewise. (pmpaddr5): Likewise. (pmpaddr6): Likewise. (pmpaddr7): Likewise. (pmpaddr8): Likewise. (pmpaddr9): Likewise. (pmpaddr10): Likewise. (pmpaddr11): Likewise. (pmpaddr12): Likewise. (pmpaddr13): Likewise. (pmpaddr14): Likewise. (pmpaddr15): Likewise.
2017-03-30Add support for the WebAssembly file format and the wasm32 ELF conversion to ↵Pip Cet
gas and the binutils. binutils * readelf.c: Add support for wasm32 ELF format WebAssembly files. (guess_is_rela): Likewise. (dump_relocations): Likewise. (is_32bit_abs_reloc): Likewise. (is_none_reloc_): Likewise. * NEWS: Mention the new support. * testsuite/lib/binutils-common.exp (is_elf_format): Mark wasm32 as ELF target. (supports_gnu_unique): Mark wasm32 as supporting STB_GNU_UNIQUE. * testsuite/binutils-all/nm.exp: Mark wasm32 as requiring .size annotations. * testsuite/binutils-all/wasm32: New directory. * testsuite/binutils-all/wasm32/create-wasm.d: New file. * testsuite/binutils-all/wasm32/create-wasm.s: Likewise. * testsuite/binutils-all/wasm32/custom-section.d: Likewise. * testsuite/binutils-all/wasm32/custom-section.s: Likewise. * testsuite/binutils-all/wasm32/invalid-wasm-1.d: Likewise. * testsuite/binutils-all/wasm32/invalid-wasm-1.s: Likewise. * testsuite/binutils-all/wasm32/long-sections.d: Likewise. * testsuite/binutils-all/wasm32/long-sections.s: Likewise. * testsuite/binutils-all/wasm32/parse-wasm.d: Likewise. * testsuite/binutils-all/wasm32/parse-wasm.s: Likewise. * testsuite/binutils-all/wasm32/parse-wasm-2.d: Likewise. * testsuite/binutils-all/wasm32/parse-wasm-2.s: Likewise. * testsuite/binutils-all/wasm32/prepared-section.d: Likewise. * testsuite/binutils-all/wasm32/prepared-section.s: Likewise. * testsuite/binutils-all/wasm32/wasm32.exp: New file, run tests. gas * config/tc-wasm32.h: New file: Add WebAssembly assembler target. * config/tc-wasm32.c: New file: Add WebAssembly assembler target. * Makefile.am: Add WebAssembly assembler target. * configure.tgt: Add WebAssembly assembler target. * doc/c-wasm32.texi: New file: Start documenting WebAssembly assembler. * doc/all.texi: Define WASM32. * doc/as.texinfo: Add WebAssembly entries. * NEWS: Mention the new support. * Makefile.in: Regenerate. * po/gas.pot: Regenerate. * po/POTFILES.in: Regenerate. * testsuite/gas/wasm32: New directory. * testsuite/gas/wasm32/allinsn.d: New file. * testsuite/gas/wasm32/allinsn.s: New file. * testsuite/gas/wasm32/illegal.l: New file. * testsuite/gas/wasm32/illegal.s: New file. * testsuite/gas/wasm32/illegal-2.l: New file. * testsuite/gas/wasm32/illegal-2.s: New file. * testsuite/gas/wasm32/illegal-3.l: New file. * testsuite/gas/wasm32/illegal-3.s: New file. * testsuite/gas/wasm32/illegal-4.l: New file. * testsuite/gas/wasm32/illegal-4.s: New file. * testsuite/gas/wasm32/illegal-5.l: New file. * testsuite/gas/wasm32/illegal-5.s: New file. * testsuite/gas/wasm32/illegal-6.l: New file. * testsuite/gas/wasm32/illegal-6.s: New file. * testsuite/gas/wasm32/illegal-7.l: New file. * testsuite/gas/wasm32/illegal-7.s: New file. * testsuite/gas/wasm32/illegal-8.l: New file. * testsuite/gas/wasm32/illegal-8.s: New file. * testsuite/gas/wasm32/illegal-9.l: New file. * testsuite/gas/wasm32/illegal-9.s: New file. * testsuite/gas/wasm32/illegal-10.l: New file. * testsuite/gas/wasm32/illegal-10.s: New file. * testsuite/gas/wasm32/illegal-11.l: New file. * testsuite/gas/wasm32/illegal-11.s: New file. * testsuite/gas/wasm32/illegal-12.l: New file. * testsuite/gas/wasm32/illegal-12.s: New file. * testsuite/gas/wasm32/illegal-13.l: New file. * testsuite/gas/wasm32/illegal-13.s: New file. * testsuite/gas/wasm32/illegal-14.l: New file. * testsuite/gas/wasm32/illegal-14.s: New file. * testsuite/gas/wasm32/illegal-15.l: New file. * testsuite/gas/wasm32/illegal-15.s: New file. * testsuite/gas/wasm32/illegal-16.l: New file. * testsuite/gas/wasm32/illegal-16.s: New file. * testsuite/gas/wasm32/illegal-17.l: New file. * testsuite/gas/wasm32/illegal-17.s: New file. * testsuite/gas/wasm32/illegal-18.l: New file. * testsuite/gas/wasm32/illegal-18.s: New file. * testsuite/gas/wasm32/illegal-19.l: New file. * testsuite/gas/wasm32/illegal-19.s: New file. * testsuite/gas/wasm32/illegal-20.l: New file. * testsuite/gas/wasm32/illegal-20.s: New file. * testsuite/gas/wasm32/illegal-21.l: New file. * testsuite/gas/wasm32/illegal-21.s: New file. * testsuite/gas/wasm32/illegal-22.l: New file. * testsuite/gas/wasm32/illegal-22.s: New file. * testsuite/gas/wasm32/illegal-24.l: New file. * testsuite/gas/wasm32/illegal-24.s: New file. * testsuite/gas/wasm32/illegal-25.l: New file. * testsuite/gas/wasm32/illegal-25.s: New file. * testsuite/gas/wasm32/reloc.d: New file. * testsuite/gas/wasm32/reloc.s: New file. * testsuite/gas/wasm32/wasm32.exp: New tests for WebAssembly architecture. opcodes * configure.ac: Add (empty) bfd_wasm32_arch target. * configure: Regenerate * po/opcodes.pot: Regenerate. include * opcode/wasm.h: New file to support wasm32 architecture. * elf/wasm32.h: Add R_WASM32_32 relocation. bfd * elf32-wasm32.c: Add relocation code, two relocs. * reloc.c: Add wasm32 relocations. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. * bfd/po/bfd.pot: Regenerate.
2017-03-29PowerPC -Mraw disassemblyAlan Modra
This adds -Mraw for PowerPC objdump, a disassembler option to display the underlying machine instruction rather than aliases. For example, "rlwinm" always rather than "rotlwi" when the instruction is performing a simple rotate. binutils/ * doc/binutils.texi (objdump): Document PowerPC -M options. gas/ * config/tc-ppc.c (md_parse_option): Reject -mraw. include/ * opcode/ppc.h (PPC_OPCODE_RAW): Define. (PPC_OPCODE_*): Make them all unsigned long long constants. opcodes/ * ppc-dis.c (ppc_opts): Set PPC_OPCODE_PPC for "any" flags. Add "raw" option. (lookup_powerpc): Don't special case -1 dialect. Handle PPC_OPCODE_RAW. (print_insn_powerpc): Mask out PPC_OPCODE_ANY on first lookup_powerpc call, pass it on second.
2017-03-27Implement ARC NPS-400 Ultra Ip and Miscellaneous instructions.Rinat Zelig
opcodes * arc-nps400-tbl.h: Add Ultra Ip and Miscellaneous instructions format. * arc-opc.c: Add defines. e.g. F_NJ, F_NM , F_NO_T, F_NPS_SR, F_NPS_M, F_NPS_CORE, F_NPS_ALL. (insert_nps_misc_imm_offset): New function. (extract_nps_misc imm_offset): New function. (arc_num_flag_operands): Add F_NJ, F_NM, F_NO_T. (arc_flag_special_cases): Add F_NJ, F_NM, F_NO_T. include * opcode/arc.h (insn_class_t): Add ULTRAIP and MISC class. gas * testsuite/gas/arc/nps400-12.s: New file. * testsuite/gas/arc/nps400-12.d: New file.
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-05 13:43:58 +0000