Clean up gdb.gdb/selftest.exp

I recently see the test fails like this,

(gdb) PASS: gdb.gdb/selftest.exp: step over argv initialization
list^M
487       std::vector<struct cmdarg> cmdarg_vec;^M
(gdb) FAIL: gdb.gdb/selftest.exp: unknown source line (after step over argv initialization)

step^M
std::vector<cmdarg, std::allocator<cmdarg> >::vector (this=0x7fffffffdc10) at ../../binutils-gdb/gdb/main.c:487^M
487       std::vector<struct cmdarg> cmdarg_vec;^M
(gdb) FAIL: gdb.gdb/selftest.exp: step into xmalloc call

These fails are caused by using std::vector in commit
f60ee22ea1d62f7004511ec65a3ad76890032d88.  selttest.exp should match
the source code of GDB.  It is a maintenance pain, so this patch
removes do_steps_and_nexts.

gdb/testsuite:

2016-12-19  Yao Qi  <yao.qi@linaro.org>

	* gdb.gdb/selftest.exp (do_steps_and_nexts): Remove.
	(test_with_self): Don't call do_steps_and_nexts, and remove
	code about stepping into xmalloc.

1 files changed, 0 insertions, 293 deletions

diff --git a/gdb/testsuite/gdb.gdb/selftest.exp b/gdb/testsuite/gdb.gdb/selftest.exp
index 340137ac8b..2e9bc89c5d 100644
--- a/gdb/testsuite/gdb.gdb/selftest.exp
+++ b/gdb/testsuite/gdb.gdb/selftest.exp
@@ -17,250 +17,6 @@
 
 load_lib selftest-support.exp
 
-# Not all of the lines of code near the start of main are executed for
-# every machine.  Also, optimization may reorder some of the lines.
-# So all we do is try to step or next over everything until we get
-# to a line that we know is always executed.
-
-proc do_steps_and_nexts {} {
-    global gdb_prompt
-    global srcdir
- 
-    gdb_reinitialize_dir $srcdir/..
-
-    set unlikely_line 0
-    for {set count 0} {$count < 32} {incr count} {
-	# NOTE: carlton/2002-12-11: The "initial brace" and
-	# "current_directory initialization" possibilities happen to
-	# me with GCC 3.1 on i686-pc-linux-gnu when I compile with
-	# optimization.
-	gdb_test_multiple "list" "list" {
-	    -re ".*context = \\(struct captured_main_args \\*\\) data.*$gdb_prompt $" {
-		set description "step over context initialization"
-		set command "step"
-	    }
-	    -re ".*argc = context->argc.*$gdb_prompt $" {
-		set description "step over argc initialization"
-		set command "step"
-	    }
-	    -re ".*argv = context->argv.*$gdb_prompt $" {
-		set description "step over argv initialization"
-		set command "step"
-	    }
-	    -re ".*quiet = 0.*$gdb_prompt $" {
-		set description "step over quiet initialization"
-		set command "step"
-	    }
-	    -re ".*batch = 0.*$gdb_prompt $" {
-		set description "step over batch initialization"
-		set command "step"
-	    }
-	    -re ".*symarg = NULL.*$gdb_prompt $" {
-		set description "step over symarg initialization"
-		set command "step"
-	    }
-	    -re ".*execarg = NULL.*$gdb_prompt $" {
-		set description "step over execarg initialization"
-		set command "step"
-	    }
-	    -re ".*pidarg = NULL.*$gdb_prompt $" {
-		set description "step over pidarg initialization"
-		set command "step"
-	    }
-	    -re ".*corearg = NULL.*$gdb_prompt $" {
-		set description "step over corearg initialization"
-		set command "step"
-	    }
-	    -re ".*pid_or_core_arg = NULL.*$gdb_prompt $" {
-		set description "step over pid_or_core_arg initialization"
-		set command "step"
-	    }
-	    -re ".*cdarg = NULL.*$gdb_prompt $" {
-		set description "step over cdarg initialization"
-		set command "step"
-	    }
-	    -re ".*ttyarg = NULL.*$gdb_prompt $" {
-		set description "step over ttyarg initialization"
-		set command "step"
-	    }
-	    -re ".*cmdarg_vec = NULL.*$gdb_prompt $" {
-		set description "step over cmdarg_vec initialization"
-		set command "step"
-	    }
-	    -re ".*pre_stat_chain = make_command_stats_cleanup.*$gdb_prompt $" {
-		set description "next over make_command_stats_cleanup and everything it calls"
-		set command "next"
-	    }
-	    -re ".*START_PROGRESS.*$gdb_prompt $" {
-		# Note: ezannoni/2004/02/17: This check should be
-		# removed, since as of today that source line is not
-		# in gdb anymore.
-		set description "next over START_PROGRESS and everything it calls"
-		set command "next"
-	    }
-	    -re ".*mac_init.*$gdb_prompt $" {
-		set description "next over mac_init and everything it calls"
-		set command "next"
-	    }
-	    -re ".*init_malloc.*$gdb_prompt $" {
-		# gdb 6.2.X is the last gdb which called init_malloc
-		set description "next over init_malloc and everything it calls"
-		set command "next"
-	    }
-	    -re ".*lim_at_start.*$gdb_prompt $" {
-		set description "next over lim_at_start initialization"
-		set command "next"
-	    }
-	    -re ".*TRY.*$gdb_prompt $" {
-		set description "next over TRY"
-		set command "next"
-	    }
-	    -re ".*captured_main \\(args\\);.*$gdb_prompt $" {
-		set description "step into captured_main (args)"
-		set command "step"
-	    }
-	    -re ".*count . 0x3.*$gdb_prompt $" {
-		set description "next over conditional stack alignment code 1"
-		set command "next"
-	    }
-	    -re ".*if .i != 0.*$gdb_prompt $" {
-		set description "next over conditional stack alignment code 2"
-		set command "next"
-	    }
-	    -re ".*alloca .i - 4.*$gdb_prompt $" {
-		set description "next over conditional stack alignment alloca"
-		set command "next"
-	    }
-	    -re ".*dirsize = 1.*$gdb_prompt $" {
-		set description "next over dirsize initialization"
-		set command "next"
-	    }
-	    -re ".*dirarg = .* xmalloc.*$gdb_prompt $" {
-		return
-	    }
-	    -re ".*setlocale .LC_MESSAGES,.*$gdb_prompt $" {
-		set description "next over setlocale LC_MESSAGES"
-		set command "next"
-	    }
-	    -re ".*setlocale .LC_CTYPE,.*$gdb_prompt $" {
-		set description "next over setlocale LC_CTYPE"
-		set command "next"
-	    }
-	    -re ".*bindtextdomain .PACKAGE, LOCALEDIR.;.*$gdb_prompt $" {
-		set description "next over bindtextdomain"
-		set command "next"
-	    }
-	    -re ".*textdomain .PACKAGE.;.*$gdb_prompt $" {
-		set description "next over textdomain PACKAGE"
-		set command "next"
-	    }
-	    -re ".*bfd_init ..;.*$gdb_prompt $" {
-		set description "next over bfd_init"
-		set command "next"
-	    }
-	    -re ".*notice_open_fds ..;.*$gdb_prompt $" {
-		set description "next over notice_open_fds"
-		set command "next"
-	    }
-	    -re ".*save_original_signals_state ..;.*$gdb_prompt $" {
-		set description "next over save_original_signals_state"
-		set command "next"
-	    }
-	    -re ".*VEC_cleanup .cmdarg_s.*$gdb_prompt $" {
-		set description "next over cmdarg_s VEC_cleanup"
-		set command "next"
-	    }
-	    -re "\[0-9\]+\[\t \]+\{\r\n$gdb_prompt $" {
-		set description "step over initial brace"
-		set command "step"
-	    }
-	    -re ".*current_directory = gdb_dirbuf.*$gdb_prompt $" {
-		set description "step over current_directory initialization"
-		set command "step"
-	    }
-	    -re ".*gdb_sysroot = .*$gdb_prompt $" {
-		# NOTE: carlton/2003-01-15: More optimization reordering,
-		# observed on GCC 3.1.
-		set description "step over gdb_sysroot initialization"
-		set command "step"
-	    }
-	    -re ".*ndir = 0.*$gdb_prompt $" {
-		set description "step over ndir initialization"
-		set command "step"
-	    }
-	    -re ".*instream = stdin.*$gdb_prompt $" {
-		set description "step over instream initialization"
-		set command "step"
-	    }
-	    -re ".*getcwd .gdb_dirbuf, sizeof .gdb_dirbuf.*$gdb_prompt $" {
-		set description "next over getcwd"
-		set command "next"
-	    }
-	    -re ".*gdb_program_name = xstrdup.*$gdb_prompt $" {
-                set description "next over xstrdup"
-                set command "next"
-            } 
-            -re ".*quit_flag = 0.*$gdb_prompt $" {
-		set description "step over quit_flag initialization"
-		set command "step"
-	    }
-	    -re ".*gdb_stdout = stdio_fileopen .stdout.;.*$gdb_prompt $" {
-		set description "step over gdb_stdout initialization"
-		set command "step"
-	    }
-	    -re ".*gdb_stderr = stdio_fileopen .stderr.;.*$gdb_prompt $" {
-		set description "step over gdb_stderr initialization"
-		set command "step"
-	    }
-	    -re "ui = current_ui.*$gdb_prompt $" {
-		set description "step over top_level initialization"
-		set command "step"
-	    }
-	    -re ".*main.c.*No such file or directory.*$gdb_prompt $" {
-		setup_xfail "rs6000-*-aix3*"
-		fail "must be able to list source lines"
-		return
-	    }
-	    -re ".*interpreter_p = xstrdup.*$gdb_prompt $" {
-		if { $unlikely_line == 0 } {
-		    # This is a GCC optimization bug; a constant has been
-		    # associated with the wrong line number.
-		    setup_xfail "*-*-*" gcc/26475
-		    fail "$description (unlikely line from gcc)"
-		    set unlikely_line 1
-		}
-		set description "next over xstrdup"
-		set command "next"
-	    }
-	    -re ".*$gdb_prompt $" {
-		# If $description hasn't been set yet, it's likely the file
-		# has been edited but gdb hasn't been recompiled.
-		if [info exists description] {
-		    fail "unknown source line (after $description)"
-		} else {
-		    fail "unknown source line"
-		}
-		return
-	    }
-	    default {
-		fail "unknown source line near main"
-		return
-	    }
-	}
-	gdb_test_multiple "$command" "$description" {
-	    -re ".*No such file or directory.\r\n$gdb_prompt $" {
-		fail "$description (no source available)"
-	    }
-	    -re ".*A file or directory .* does not exist..\r\n$gdb_prompt $" {
-		fail "$description (no source available)"
-	    }
-	    -re ".*$gdb_prompt $" {
-		pass "$description"
-	    }
-	}
-    }
-}
-
 proc test_with_self { } {
     global gdb_prompt
     global decimal
@@ -299,55 +55,6 @@ proc test_with_self { } {
 	}
     }
 
-    do_steps_and_nexts
-
-    gdb_test "print \"foo\"" ".\[0-9\]+ = \"foo\"" "print a string"
-
-    # do_steps_and_nexts left us ready to execute an xmalloc call,
-    # so give that a try.
-    # If we don't actually enter the xmalloc call when we give a
-    # step command that seems like a genuine bug.  It seems to happen
-    # on most RISC processors.
-    # NOTE drow/2003-06-22: However, if we step back to the preceding two
-    # lines, just keep stepping until we enter.
-    set stepped_back 0
-    setup_xfail "alpha-*-*" "mips-*-*"
-    set description "step into xmalloc call"
-    gdb_test_multiple "step" "$description" {
-	-re "ncmd = 0;.*$gdb_prompt $" {
-	    set stepped_back 1
-	    send_gdb "step\n"
-	    exp_continue
-	}
-        -re ".*cmdarg = .* xmalloc.*$gdb_prompt $" {
-	    set stepped_back 1
-	    send_gdb "step\n"
-	    exp_continue
-        }
-	-re "dirsize = 1;.*$gdb_prompt $" {
-	    set stepped_back 1
-	    send_gdb "step\n"
-	    exp_continue
-	}
-	-re ".*dirarg = .* xmalloc.*$gdb_prompt $" {
-	    if { $stepped_back == 1 } {
-		send_gdb "step\n"
-		exp_continue
-	    } else {
-		fail "$description"
-	    }
-	}
-	-re "xmalloc.*size=.*at.*utils.c.*$gdb_prompt $" {
-	    pass "$description"
-	}
-	-re ".*No such file or directory.\r\n$gdb_prompt $" {
-	    pass "$description (no source available)"
-	}
-	-re "A file or directory .* does not exist..\r\n$gdb_prompt $" {
-	    pass "$description (no source available)"
-	}
-    }
-
     # start the "xgdb" process
     if [target_info exists gdb,noinferiorio] {
 	# With no way to interact with the inferior GDB, all we can do