* dummy-frame.c (dummy_frame): Replace regcache member with

	caller_state.
	(dummy_frame_push): Replace caller_regcache arg with caller_state.
	All callers updated.
	(remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
	(dummy_frame_pop): Rewrite.  Verify requested frame is in the
	dummy frame stack.  Restore program state.
	(cleanup_dummy_frames): Rewrite.
	(dummy_frame_sniffer): Update.  Make static.
	* dummy-frame.h (regcache,frame_info): Delete forward decls.
	(inferior_thread_state): New forward decl.
	(dummy_frame_push): Update prototype.
	* frame.c (frame_pop): dummy_frame_pop now does all the work for
	DUMMY_FRAMEs.
	* infcall.c (breakpoint_auto_delete_contents): Delete.
	(get_function_name,run_inferior_call): New fns.
	(call_function_by_hand): Simplify by moving some code to
	get_function_name, run_inferior_call.  Inferior function call wrapped
	in TRY_CATCH so there's less need for cleanups and all exits from
	proceed are handled similarily.  Detect program exit.
	Detect program stopping in a different thread.
	Make error messages more consistent.
	* inferior.h (inferior_thread_state): Declare (opaque type).
	(save_inferior_thread_state,restore_inferior_thread_state,
	make_cleanup_restore_inferior_thread_state,
	discard_inferior_thread_state, get_inferior_thread_state_regcache):
	Declare.
	(save_inferior_status): Update prototype.
	* infrun.c: (normal_stop): When stopped for the completion of an
	inferior function call, verify the expected stack frame kind.
	(inferior_thread_state): New struct.
	(save_inferior_thread_state,restore_inferior_thread_state,
	do_restore_inferior_thread_state_cleanup,
	make_cleanup_restore_inferior_thread_state,
	discard_inferior_thread_state,
	get_inferior_thread_state_regcache): New functions.
	(inferior_status): Move stop_signal, stop_pc, registers to
	inferior_thread_state.  Remove restore_stack_info.
	(save_inferior_status): Remove arg restore_stack_info.
	All callers updated.  Remove saving of state now saved by
	save_inferior_thread_state.
	(restore_inferior_status): Remove restoration of state now done by
	restore_inferior_thread_state.
	(discard_inferior_status): Remove freeing of registers, now done by
	discard_inferior_thread_state.

	* gdb.base/break.exp: Update expected gdb output.
	* gdb.base/sepdebug.exp: Ditto.
	* gdb.mi/mi-syn-frame.exp: Ditto.
	* gdb.mi/mi2-syn-frame.exp: Ditto.

	* gdb.base/call-signal-resume.exp: New file.
	* gdb.base/call-signals.c: New file.
	* gdb.base/unwindonsignal.exp: New file.
	* gdb.base/unwindonsignal.c: New file.
	* gdb.threads/interrupted-hand-call.exp: New file.
	* gdb.threads/interrupted-hand-call.c: New file.
	* gdb.threads/thread-unwindonsignal.exp: New file.

1 files changed, 159 insertions, 0 deletions

diff --git a/gdb/testsuite/gdb.base/call-signal-resume.exp b/gdb/testsuite/gdb.base/call-signal-resume.exp
new file mode 100644
index 0000000000..ed0903ee32
--- /dev/null
+++ b/gdb/testsuite/gdb.base/call-signal-resume.exp
@@ -0,0 +1,159 @@
+# Copyright 2008 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# Test inferior resumption after discarding a hand-called function.
+# There are two things to test.
+# 1) Inferior stops normally.  Upon resumption it should continue normally,
+#    regardless of whatever signal the hand-called function got.
+# 2) Inferior is stopped at a signal.  Upon resumption it should continue
+#    with that signal, regardless of whatever the hand-called function did.
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [target_info exists gdb,noinferiorio] {
+    verbose "Skipping call-signal-resume.exp because of no fileio capabilities."
+    continue
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "call-signals"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     untested call-signal-resume.exp
+     return -1
+}
+
+# Some targets can't do function calls, so don't even bother with this
+# test.
+if [target_info exists gdb,cannot_call_functions] {
+    setup_xfail "*-*-*" 2416
+    fail "This target can not call functions"
+    continue
+}
+
+proc get_dummy_frame_number { } {
+  global gdb_prompt
+
+  send_gdb "bt\n"
+  gdb_expect {
+    -re "#(\[0-9\]*) *<function called from gdb>.*$gdb_prompt $"
+      {
+	return $expect_out(1,string)
+      }
+    -re "$gdb_prompt $"
+      {
+	return ""
+      }
+    timeout
+      {
+	return ""
+      }
+  }
+  return ""
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+if { ![runto_main] } {
+    fail "Can't run to main"
+    return 0
+}
+
+gdb_test "break stop_one" "Breakpoint \[0-9\]* at .*"
+gdb_test "continue" "Continuing.*Breakpoint \[0-9\]*, stop_one.*" \
+    "continue to breakpoint at stop_one"
+
+# Call function (causing the program to get a signal), and see if gdb handles
+# it properly.
+gdb_test_multiple "call gen_signal ()" \
+	"inferior function call signaled" {
+    -re "\[\r\n\]*no signal\[\r\n\]+$gdb_prompt $" {
+	unsupported "inferior function call signaled"
+	return 0
+    }
+    -re "\[\r\n\]*The program being debugged was signaled.*\[\r\n\]+$gdb_prompt $" {
+	pass "inferior function call signaled"
+    }
+}
+
+set frame_number [get_dummy_frame_number]
+if { "$frame_number" == "" } {
+    fail "dummy stack frame number"
+    setup_xfail "*-*-*"
+} else {
+    pass "dummy stack frame number"
+}
+
+# Pop the dummy frame.
+gdb_test "frame $frame_number" ""
+gdb_test "set confirm off" ""
+gdb_test "return" ""
+
+# Resume execution, the program should continue without any signal.
+
+gdb_test "break stop_two" "Breakpoint \[0-9\]* at .*"
+gdb_test "continue" "Breakpoint \[0-9\]*, stop_two.*" \
+    "continue to breakpoint at stop_two"
+
+# Continue again, we should get a signal.
+
+gdb_test "continue" "Program received signal .*" \
+    "continue to receipt of signal"
+
+# Hand call another function that prematurely stops,
+# then manually pop the dummy stack frame.
+
+gdb_test "break null_hand_call" "Breakpoint \[0-9\]* at .*"
+gdb_test "call null_hand_call ()" "Breakpoint \[0-9\]*, null_hand_call.*" \
+    "null_hand_call"
+
+set frame_number [get_dummy_frame_number]
+if { "$frame_number" == "" } {
+    fail "dummy stack frame number"
+    setup_xfail "*-*-*"
+    # Need something.
+    set frame_number 0
+} else {
+    pass "dummy stack frame number"
+}
+
+# Pop the dummy frame.
+gdb_test "frame $frame_number" ""
+gdb_test "set confirm off" ""
+gdb_test "return" ""
+
+# Continue again, this time we should get to the signal handler.
+
+gdb_test "break handle_signal" "Breakpoint \[0-9\]* at .*"
+gdb_test "continue" "Breakpoint \[0-9\]*, handle_signal.*" \
+    "continue to breakpoint at handle_signal"
+
+# Continue one last time, the program should exit normally.
+
+gdb_test "continue" "Program exited normally." \
+    "continue to program exit"
+
+return 0