/* * (C) Copyright 2012 * Atmel Semiconductor * Written-by: Bo Shen * * SPDX-License-Identifier: GPL-2.0+ */ #include #include #include #include #include #include #include "ehci.h" DECLARE_GLOBAL_DATA_PTR; #ifndef CONFIG_DM_USB int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr, struct ehci_hcor **hcor) { /* Enable UTMI PLL */ if (at91_upll_clk_enable()) return -1; /* Enable USB Host clock */ at91_periph_clk_enable(ATMEL_ID_UHPHS); *hccr = (struct ehci_hccr *)ATMEL_BASE_EHCI; *hcor = (struct ehci_hcor *)((uint32_t)*hccr + HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); return 0; } int ehci_hcd_stop(int index) { /* Disable USB Host Clock */ at91_periph_clk_disable(ATMEL_ID_UHPHS); /* Disable UTMI PLL */ if (at91_upll_clk_disable()) return -1; return 0; } #else struct ehci_atmel_priv { struct ehci_ctrl ehci; }; static int ehci_atmel_enable_clk(struct udevice *dev) { struct clk clk; int ret; ret = clk_get_by_index(dev, 0, &clk); if (ret) return ret; ret = clk_enable(&clk); if (ret) return ret; ret = clk_get_by_index(dev, 1, &clk); if (ret) return -EINVAL; ret = clk_enable(&clk); if (ret) return ret; clk_free(&clk); return 0; } static int ehci_atmel_probe(struct udevice *dev) { struct ehci_hccr *hccr; struct ehci_hcor *hcor; fdt_addr_t hcd_base; int ret; ret = ehci_atmel_enable_clk(dev); if (ret) { debug("Failed to enable USB Host clock\n"); return ret; } /* * Get the base address for EHCI controller from the device node */ hcd_base = devfdt_get_addr(dev); if (hcd_base == FDT_ADDR_T_NONE) { debug("Can't get the EHCI register base address\n"); return -ENXIO; } hccr = (struct ehci_hccr *)hcd_base; hcor = (struct ehci_hcor *) ((u32)hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase))); debug("echi-atmel: init hccr %x and hcor %x hc_length %d\n", (u32)hccr, (u32)hcor, (u32)HC_LENGTH(ehci_readl(&hccr->cr_capbase))); return ehci_register(dev, hccr, hcor, NULL, 0, USB_INIT_HOST); } static const struct udevice_id ehci_usb_ids[] = { { .compatible = "atmel,at91sam9g45-ehci", }, { } }; U_BOOT_DRIVER(ehci_atmel) = { .name = "ehci_atmel", .id = UCLASS_USB, .of_match = ehci_usb_ids, .probe = ehci_atmel_probe, .remove = ehci_deregister, .ops = &ehci_usb_ops, .platdata_auto_alloc_size = sizeof(struct usb_platdata), .priv_auto_alloc_size = sizeof(struct ehci_atmel_priv), .flags = DM_FLAG_ALLOC_PRIV_DMA, }; #endif