From f2105c61821b67bc1d572304d901518e88ee007b Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 14 Jun 2017 21:28:26 -0600 Subject: sata: Move drivers into new drivers/ata directory At present we have the SATA and PATA drivers mixed up in the drivers/block directory. It is better to split them out into their own place. Use drivers/ata which is what Linux does. Signed-off-by: Simon Glass Reviewed-by: Bin Meng --- drivers/ata/Kconfig | 62 ++ drivers/ata/Makefile | 22 + drivers/ata/ahci-uclass.c | 14 + drivers/ata/ahci.c | 1094 +++++++++++++++++++++++ drivers/ata/dwc_ahci.c | 101 +++ drivers/ata/dwc_ahsata.c | 1018 ++++++++++++++++++++++ drivers/ata/dwc_ahsata.h | 320 +++++++ drivers/ata/fsl_sata.c | 854 ++++++++++++++++++ drivers/ata/fsl_sata.h | 321 +++++++ drivers/ata/libata.c | 144 +++ drivers/ata/mvsata_ide.c | 199 +++++ drivers/ata/mxc_ata.c | 129 +++ drivers/ata/sata.c | 117 +++ drivers/ata/sata_ceva.c | 149 ++++ drivers/ata/sata_dwc.c | 2076 ++++++++++++++++++++++++++++++++++++++++++++ drivers/ata/sata_dwc.h | 465 ++++++++++ drivers/ata/sata_mv.c | 1051 ++++++++++++++++++++++ drivers/ata/sata_sandbox.c | 33 + drivers/ata/sata_sil.c | 715 +++++++++++++++ drivers/ata/sata_sil.h | 214 +++++ drivers/ata/sata_sil3114.c | 835 ++++++++++++++++++ drivers/ata/sata_sil3114.h | 134 +++ 22 files changed, 10067 insertions(+) create mode 100644 drivers/ata/Kconfig create mode 100644 drivers/ata/Makefile create mode 100644 drivers/ata/ahci-uclass.c create mode 100644 drivers/ata/ahci.c create mode 100644 drivers/ata/dwc_ahci.c create mode 100644 drivers/ata/dwc_ahsata.c create mode 100644 drivers/ata/dwc_ahsata.h create mode 100644 drivers/ata/fsl_sata.c create mode 100644 drivers/ata/fsl_sata.h create mode 100644 drivers/ata/libata.c create mode 100644 drivers/ata/mvsata_ide.c create mode 100644 drivers/ata/mxc_ata.c create mode 100644 drivers/ata/sata.c create mode 100644 drivers/ata/sata_ceva.c create mode 100644 drivers/ata/sata_dwc.c create mode 100644 drivers/ata/sata_dwc.h create mode 100644 drivers/ata/sata_mv.c create mode 100644 drivers/ata/sata_sandbox.c create mode 100644 drivers/ata/sata_sil.c create mode 100644 drivers/ata/sata_sil.h create mode 100644 drivers/ata/sata_sil3114.c create mode 100644 drivers/ata/sata_sil3114.h (limited to 'drivers/ata') diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig new file mode 100644 index 0000000000..6427f1b94a --- /dev/null +++ b/drivers/ata/Kconfig @@ -0,0 +1,62 @@ +config AHCI + bool "Support SATA controllers with driver model" + depends on DM + help + This enables a uclass for disk controllers in U-Boot. Various driver + types can use this, such as AHCI/SATA. It does not provide any standard + operations at present. The block device interface has not been converted + to driver model. + +config SATA + bool "Support SATA controllers" + help + This enables support for SATA (Serial Advanced Technology + Attachment), a serial bus standard for connecting to hard drives and + other storage devices. + + SATA replaces PATA (originally just ATA), which stands for Parallel AT + Attachment, where AT refers to an IBM AT (Advanced Technology) + computer released in 1984. + + See also CMD_SATA which provides command-line support. + +config SCSI + bool "Support SCSI controllers" + help + This enables support for SCSI (Small Computer System Interface), + a parallel interface widely used with storage peripherals such as + hard drives and optical drives. The SCSI standards define physical + interfaces as well as protocols for controlling devices and + tranferring data. + +config DM_SCSI + bool "Support SCSI controllers with driver model" + depends on BLK + help + This option enables the SCSI (Small Computer System Interface) uclass + which supports SCSI and SATA HDDs. For every device configuration + (IDs/LUNs) a block device is created with RAW read/write and + filesystem support. + +menu "SATA/SCSI device support" + +config SATA_CEVA + bool "Ceva Sata controller" + depends on AHCI + depends on DM_SCSI + help + This option enables Ceva Sata controller hard IP available on Xilinx + ZynqMP. Support up to 2 external devices. Complient with SATA 3.1 and + AHCI 1.3 specifications with hot-plug detect feature. + + +config DWC_AHCI + bool "Enable Synopsys DWC AHCI driver support" + select SCSI_AHCI + select PHY + depends on DM_SCSI + help + Enable this driver to support Sata devices through + Synopsys DWC AHCI module. + +endmenu diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile new file mode 100644 index 0000000000..c48184c4c3 --- /dev/null +++ b/drivers/ata/Makefile @@ -0,0 +1,22 @@ +# +# (C) Copyright 2000-2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_DWC_AHCI) += dwc_ahci.o +obj-$(CONFIG_AHCI) += ahci-uclass.o +obj-$(CONFIG_SCSI_AHCI) += ahci.o +obj-$(CONFIG_DWC_AHSATA) += dwc_ahsata.o +obj-$(CONFIG_FSL_SATA) += fsl_sata.o +obj-$(CONFIG_LIBATA) += libata.o +obj-$(CONFIG_MVSATA_IDE) += mvsata_ide.o +obj-$(CONFIG_MX51_PATA) += mxc_ata.o +obj-$(CONFIG_SATA) += sata.o +obj-$(CONFIG_SATA_CEVA) += sata_ceva.o +obj-$(CONFIG_SATA_DWC) += sata_dwc.o +obj-$(CONFIG_SATA_MV) += sata_mv.o +obj-$(CONFIG_SATA_SIL3114) += sata_sil3114.o +obj-$(CONFIG_SATA_SIL) += sata_sil.o +obj-$(CONFIG_SANDBOX) += sata_sandbox.o diff --git a/drivers/ata/ahci-uclass.c b/drivers/ata/ahci-uclass.c new file mode 100644 index 0000000000..7b8c32699f --- /dev/null +++ b/drivers/ata/ahci-uclass.c @@ -0,0 +1,14 @@ +/* + * Copyright (c) 2015 Google, Inc + * Written by Simon Glass + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +UCLASS_DRIVER(ahci) = { + .id = UCLASS_AHCI, + .name = "ahci", +}; diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c new file mode 100644 index 0000000000..f4744718a8 --- /dev/null +++ b/drivers/ata/ahci.c @@ -0,0 +1,1094 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. + * Author: Jason Jin + * Zhang Wei + * + * SPDX-License-Identifier: GPL-2.0+ + * + * with the reference on libata and ahci drvier in kernel + */ +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int ata_io_flush(u8 port); + +struct ahci_probe_ent *probe_ent = NULL; +u16 *ataid[AHCI_MAX_PORTS]; + +#define writel_with_flush(a,b) do { writel(a,b); readl(b); } while (0) + +/* + * Some controllers limit number of blocks they can read/write at once. + * Contemporary SSD devices work much faster if the read/write size is aligned + * to a power of 2. Let's set default to 128 and allowing to be overwritten if + * needed. + */ +#ifndef MAX_SATA_BLOCKS_READ_WRITE +#define MAX_SATA_BLOCKS_READ_WRITE 0x80 +#endif + +/* Maximum timeouts for each event */ +#define WAIT_MS_SPINUP 20000 +#define WAIT_MS_DATAIO 10000 +#define WAIT_MS_FLUSH 5000 +#define WAIT_MS_LINKUP 200 + +__weak void __iomem *ahci_port_base(void __iomem *base, u32 port) +{ + return base + 0x100 + (port * 0x80); +} + + +static void ahci_setup_port(struct ahci_ioports *port, void __iomem *base, + unsigned int port_idx) +{ + base = ahci_port_base(base, port_idx); + + port->cmd_addr = base; + port->scr_addr = base + PORT_SCR; +} + + +#define msleep(a) udelay(a * 1000) + +static void ahci_dcache_flush_range(unsigned long begin, unsigned long len) +{ + const unsigned long start = begin; + const unsigned long end = start + len; + + debug("%s: flush dcache: [%#lx, %#lx)\n", __func__, start, end); + flush_dcache_range(start, end); +} + +/* + * SATA controller DMAs to physical RAM. Ensure data from the + * controller is invalidated from dcache; next access comes from + * physical RAM. + */ +static void ahci_dcache_invalidate_range(unsigned long begin, unsigned long len) +{ + const unsigned long start = begin; + const unsigned long end = start + len; + + debug("%s: invalidate dcache: [%#lx, %#lx)\n", __func__, start, end); + invalidate_dcache_range(start, end); +} + +/* + * Ensure data for SATA controller is flushed out of dcache and + * written to physical memory. + */ +static void ahci_dcache_flush_sata_cmd(struct ahci_ioports *pp) +{ + ahci_dcache_flush_range((unsigned long)pp->cmd_slot, + AHCI_PORT_PRIV_DMA_SZ); +} + +static int waiting_for_cmd_completed(void __iomem *offset, + int timeout_msec, + u32 sign) +{ + int i; + u32 status; + + for (i = 0; ((status = readl(offset)) & sign) && i < timeout_msec; i++) + msleep(1); + + return (i < timeout_msec) ? 0 : -1; +} + +int __weak ahci_link_up(struct ahci_probe_ent *probe_ent, u8 port) +{ + u32 tmp; + int j = 0; + void __iomem *port_mmio = probe_ent->port[port].port_mmio; + + /* + * Bring up SATA link. + * SATA link bringup time is usually less than 1 ms; only very + * rarely has it taken between 1-2 ms. Never seen it above 2 ms. + */ + while (j < WAIT_MS_LINKUP) { + tmp = readl(port_mmio + PORT_SCR_STAT); + tmp &= PORT_SCR_STAT_DET_MASK; + if (tmp == PORT_SCR_STAT_DET_PHYRDY) + return 0; + udelay(1000); + j++; + } + return 1; +} + +#ifdef CONFIG_SUNXI_AHCI +/* The sunxi AHCI controller requires this undocumented setup */ +static void sunxi_dma_init(void __iomem *port_mmio) +{ + clrsetbits_le32(port_mmio + PORT_P0DMACR, 0x0000ff00, 0x00004400); +} +#endif + +int ahci_reset(void __iomem *base) +{ + int i = 1000; + u32 __iomem *host_ctl_reg = base + HOST_CTL; + u32 tmp = readl(host_ctl_reg); /* global controller reset */ + + if ((tmp & HOST_RESET) == 0) + writel_with_flush(tmp | HOST_RESET, host_ctl_reg); + + /* + * reset must complete within 1 second, or + * the hardware should be considered fried. + */ + do { + udelay(1000); + tmp = readl(host_ctl_reg); + i--; + } while ((i > 0) && (tmp & HOST_RESET)); + + if (i == 0) { + printf("controller reset failed (0x%x)\n", tmp); + return -1; + } + + return 0; +} + +static int ahci_host_init(struct ahci_probe_ent *probe_ent) +{ +#if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI) +# ifdef CONFIG_DM_PCI + struct udevice *dev = probe_ent->dev; + struct pci_child_platdata *pplat = dev_get_parent_platdata(dev); +# else + pci_dev_t pdev = probe_ent->dev; + unsigned short vendor; +# endif + u16 tmp16; +#endif + void __iomem *mmio = probe_ent->mmio_base; + u32 tmp, cap_save, cmd; + int i, j, ret; + void __iomem *port_mmio; + u32 port_map; + + debug("ahci_host_init: start\n"); + + cap_save = readl(mmio + HOST_CAP); + cap_save &= ((1 << 28) | (1 << 17)); + cap_save |= (1 << 27); /* Staggered Spin-up. Not needed. */ + + ret = ahci_reset(probe_ent->mmio_base); + if (ret) + return ret; + + writel_with_flush(HOST_AHCI_EN, mmio + HOST_CTL); + writel(cap_save, mmio + HOST_CAP); + writel_with_flush(0xf, mmio + HOST_PORTS_IMPL); + +#if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI) +# ifdef CONFIG_DM_PCI + if (pplat->vendor == PCI_VENDOR_ID_INTEL) { + u16 tmp16; + + dm_pci_read_config16(dev, 0x92, &tmp16); + dm_pci_write_config16(dev, 0x92, tmp16 | 0xf); + } +# else + pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor); + + if (vendor == PCI_VENDOR_ID_INTEL) { + u16 tmp16; + pci_read_config_word(pdev, 0x92, &tmp16); + tmp16 |= 0xf; + pci_write_config_word(pdev, 0x92, tmp16); + } +# endif +#endif + probe_ent->cap = readl(mmio + HOST_CAP); + probe_ent->port_map = readl(mmio + HOST_PORTS_IMPL); + port_map = probe_ent->port_map; + probe_ent->n_ports = (probe_ent->cap & 0x1f) + 1; + + debug("cap 0x%x port_map 0x%x n_ports %d\n", + probe_ent->cap, probe_ent->port_map, probe_ent->n_ports); + + if (probe_ent->n_ports > CONFIG_SYS_SCSI_MAX_SCSI_ID) + probe_ent->n_ports = CONFIG_SYS_SCSI_MAX_SCSI_ID; + + for (i = 0; i < probe_ent->n_ports; i++) { + if (!(port_map & (1 << i))) + continue; + probe_ent->port[i].port_mmio = ahci_port_base(mmio, i); + port_mmio = (u8 *) probe_ent->port[i].port_mmio; + ahci_setup_port(&probe_ent->port[i], mmio, i); + + /* make sure port is not active */ + tmp = readl(port_mmio + PORT_CMD); + if (tmp & (PORT_CMD_LIST_ON | PORT_CMD_FIS_ON | + PORT_CMD_FIS_RX | PORT_CMD_START)) { + debug("Port %d is active. Deactivating.\n", i); + tmp &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON | + PORT_CMD_FIS_RX | PORT_CMD_START); + writel_with_flush(tmp, port_mmio + PORT_CMD); + + /* spec says 500 msecs for each bit, so + * this is slightly incorrect. + */ + msleep(500); + } + +#ifdef CONFIG_SUNXI_AHCI + sunxi_dma_init(port_mmio); +#endif + + /* Add the spinup command to whatever mode bits may + * already be on in the command register. + */ + cmd = readl(port_mmio + PORT_CMD); + cmd |= PORT_CMD_SPIN_UP; + writel_with_flush(cmd, port_mmio + PORT_CMD); + + /* Bring up SATA link. */ + ret = ahci_link_up(probe_ent, i); + if (ret) { + printf("SATA link %d timeout.\n", i); + continue; + } else { + debug("SATA link ok.\n"); + } + + /* Clear error status */ + tmp = readl(port_mmio + PORT_SCR_ERR); + if (tmp) + writel(tmp, port_mmio + PORT_SCR_ERR); + + debug("Spinning up device on SATA port %d... ", i); + + j = 0; + while (j < WAIT_MS_SPINUP) { + tmp = readl(port_mmio + PORT_TFDATA); + if (!(tmp & (ATA_BUSY | ATA_DRQ))) + break; + udelay(1000); + tmp = readl(port_mmio + PORT_SCR_STAT); + tmp &= PORT_SCR_STAT_DET_MASK; + if (tmp == PORT_SCR_STAT_DET_PHYRDY) + break; + j++; + } + + tmp = readl(port_mmio + PORT_SCR_STAT) & PORT_SCR_STAT_DET_MASK; + if (tmp == PORT_SCR_STAT_DET_COMINIT) { + debug("SATA link %d down (COMINIT received), retrying...\n", i); + i--; + continue; + } + + printf("Target spinup took %d ms.\n", j); + if (j == WAIT_MS_SPINUP) + debug("timeout.\n"); + else + debug("ok.\n"); + + tmp = readl(port_mmio + PORT_SCR_ERR); + debug("PORT_SCR_ERR 0x%x\n", tmp); + writel(tmp, port_mmio + PORT_SCR_ERR); + + /* ack any pending irq events for this port */ + tmp = readl(port_mmio + PORT_IRQ_STAT); + debug("PORT_IRQ_STAT 0x%x\n", tmp); + if (tmp) + writel(tmp, port_mmio + PORT_IRQ_STAT); + + writel(1 << i, mmio + HOST_IRQ_STAT); + + /* register linkup ports */ + tmp = readl(port_mmio + PORT_SCR_STAT); + debug("SATA port %d status: 0x%x\n", i, tmp); + if ((tmp & PORT_SCR_STAT_DET_MASK) == PORT_SCR_STAT_DET_PHYRDY) + probe_ent->link_port_map |= (0x01 << i); + } + + tmp = readl(mmio + HOST_CTL); + debug("HOST_CTL 0x%x\n", tmp); + writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL); + tmp = readl(mmio + HOST_CTL); + debug("HOST_CTL 0x%x\n", tmp); +#if !defined(CONFIG_DM_SCSI) +#ifndef CONFIG_SCSI_AHCI_PLAT +# ifdef CONFIG_DM_PCI + dm_pci_read_config16(dev, PCI_COMMAND, &tmp16); + tmp |= PCI_COMMAND_MASTER; + dm_pci_write_config16(dev, PCI_COMMAND, tmp16); +# else + pci_read_config_word(pdev, PCI_COMMAND, &tmp16); + tmp |= PCI_COMMAND_MASTER; + pci_write_config_word(pdev, PCI_COMMAND, tmp16); +# endif +#endif +#endif + return 0; +} + + +static void ahci_print_info(struct ahci_probe_ent *probe_ent) +{ +#if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI) +# if defined(CONFIG_DM_PCI) + struct udevice *dev = probe_ent->dev; +# else + pci_dev_t pdev = probe_ent->dev; +# endif + u16 cc; +#endif + void __iomem *mmio = probe_ent->mmio_base; + u32 vers, cap, cap2, impl, speed; + const char *speed_s; + const char *scc_s; + + vers = readl(mmio + HOST_VERSION); + cap = probe_ent->cap; + cap2 = readl(mmio + HOST_CAP2); + impl = probe_ent->port_map; + + speed = (cap >> 20) & 0xf; + if (speed == 1) + speed_s = "1.5"; + else if (speed == 2) + speed_s = "3"; + else if (speed == 3) + speed_s = "6"; + else + speed_s = "?"; + +#if defined(CONFIG_SCSI_AHCI_PLAT) || defined(CONFIG_DM_SCSI) + scc_s = "SATA"; +#else +# ifdef CONFIG_DM_PCI + dm_pci_read_config16(dev, 0x0a, &cc); +# else + pci_read_config_word(pdev, 0x0a, &cc); +# endif + if (cc == 0x0101) + scc_s = "IDE"; + else if (cc == 0x0106) + scc_s = "SATA"; + else if (cc == 0x0104) + scc_s = "RAID"; + else + scc_s = "unknown"; +#endif + printf("AHCI %02x%02x.%02x%02x " + "%u slots %u ports %s Gbps 0x%x impl %s mode\n", + (vers >> 24) & 0xff, + (vers >> 16) & 0xff, + (vers >> 8) & 0xff, + vers & 0xff, + ((cap >> 8) & 0x1f) + 1, (cap & 0x1f) + 1, speed_s, impl, scc_s); + + printf("flags: " + "%s%s%s%s%s%s%s" + "%s%s%s%s%s%s%s" + "%s%s%s%s%s%s\n", + cap & (1 << 31) ? "64bit " : "", + cap & (1 << 30) ? "ncq " : "", + cap & (1 << 28) ? "ilck " : "", + cap & (1 << 27) ? "stag " : "", + cap & (1 << 26) ? "pm " : "", + cap & (1 << 25) ? "led " : "", + cap & (1 << 24) ? "clo " : "", + cap & (1 << 19) ? "nz " : "", + cap & (1 << 18) ? "only " : "", + cap & (1 << 17) ? "pmp " : "", + cap & (1 << 16) ? "fbss " : "", + cap & (1 << 15) ? "pio " : "", + cap & (1 << 14) ? "slum " : "", + cap & (1 << 13) ? "part " : "", + cap & (1 << 7) ? "ccc " : "", + cap & (1 << 6) ? "ems " : "", + cap & (1 << 5) ? "sxs " : "", + cap2 & (1 << 2) ? "apst " : "", + cap2 & (1 << 1) ? "nvmp " : "", + cap2 & (1 << 0) ? "boh " : ""); +} + +#ifndef CONFIG_SCSI_AHCI_PLAT +# if defined(CONFIG_DM_PCI) || defined(CONFIG_DM_SCSI) +static int ahci_init_one(struct udevice *dev) +# else +static int ahci_init_one(pci_dev_t dev) +# endif +{ +#if !defined(CONFIG_DM_SCSI) + u16 vendor; +#endif + int rc; + + probe_ent = malloc(sizeof(struct ahci_probe_ent)); + if (!probe_ent) { + printf("%s: No memory for probe_ent\n", __func__); + return -ENOMEM; + } + + memset(probe_ent, 0, sizeof(struct ahci_probe_ent)); + probe_ent->dev = dev; + + probe_ent->host_flags = ATA_FLAG_SATA + | ATA_FLAG_NO_LEGACY + | ATA_FLAG_MMIO + | ATA_FLAG_PIO_DMA + | ATA_FLAG_NO_ATAPI; + probe_ent->pio_mask = 0x1f; + probe_ent->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */ + +#if !defined(CONFIG_DM_SCSI) +#ifdef CONFIG_DM_PCI + probe_ent->mmio_base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_5, + PCI_REGION_MEM); + + /* Take from kernel: + * JMicron-specific fixup: + * make sure we're in AHCI mode + */ + dm_pci_read_config16(dev, PCI_VENDOR_ID, &vendor); + if (vendor == 0x197b) + dm_pci_write_config8(dev, 0x41, 0xa1); +#else + probe_ent->mmio_base = pci_map_bar(dev, PCI_BASE_ADDRESS_5, + PCI_REGION_MEM); + + /* Take from kernel: + * JMicron-specific fixup: + * make sure we're in AHCI mode + */ + pci_read_config_word(dev, PCI_VENDOR_ID, &vendor); + if (vendor == 0x197b) + pci_write_config_byte(dev, 0x41, 0xa1); +#endif +#else + struct scsi_platdata *plat = dev_get_platdata(dev); + probe_ent->mmio_base = (void *)plat->base; +#endif + + debug("ahci mmio_base=0x%p\n", probe_ent->mmio_base); + /* initialize adapter */ + rc = ahci_host_init(probe_ent); + if (rc) + goto err_out; + + ahci_print_info(probe_ent); + + return 0; + + err_out: + return rc; +} +#endif + +#define MAX_DATA_BYTE_COUNT (4*1024*1024) + +static int ahci_fill_sg(u8 port, unsigned char *buf, int buf_len) +{ + struct ahci_ioports *pp = &(probe_ent->port[port]); + struct ahci_sg *ahci_sg = pp->cmd_tbl_sg; + u32 sg_count; + int i; + + sg_count = ((buf_len - 1) / MAX_DATA_BYTE_COUNT) + 1; + if (sg_count > AHCI_MAX_SG) { + printf("Error:Too much sg!\n"); + return -1; + } + + for (i = 0; i < sg_count; i++) { + ahci_sg->addr = + cpu_to_le32((unsigned long) buf + i * MAX_DATA_BYTE_COUNT); + ahci_sg->addr_hi = 0; + ahci_sg->flags_size = cpu_to_le32(0x3fffff & + (buf_len < MAX_DATA_BYTE_COUNT + ? (buf_len - 1) + : (MAX_DATA_BYTE_COUNT - 1))); + ahci_sg++; + buf_len -= MAX_DATA_BYTE_COUNT; + } + + return sg_count; +} + + +static void ahci_fill_cmd_slot(struct ahci_ioports *pp, u32 opts) +{ + pp->cmd_slot->opts = cpu_to_le32(opts); + pp->cmd_slot->status = 0; + pp->cmd_slot->tbl_addr = cpu_to_le32((u32)pp->cmd_tbl & 0xffffffff); +#ifdef CONFIG_PHYS_64BIT + pp->cmd_slot->tbl_addr_hi = + cpu_to_le32((u32)(((pp->cmd_tbl) >> 16) >> 16)); +#endif +} + +static int wait_spinup(void __iomem *port_mmio) +{ + ulong start; + u32 tf_data; + + start = get_timer(0); + do { + tf_data = readl(port_mmio + PORT_TFDATA); + if (!(tf_data & ATA_BUSY)) + return 0; + } while (get_timer(start) < WAIT_MS_SPINUP); + + return -ETIMEDOUT; +} + +static int ahci_port_start(u8 port) +{ + struct ahci_ioports *pp = &(probe_ent->port[port]); + void __iomem *port_mmio = pp->port_mmio; + u32 port_status; + void __iomem *mem; + + debug("Enter start port: %d\n", port); + port_status = readl(port_mmio + PORT_SCR_STAT); + debug("Port %d status: %x\n", port, port_status); + if ((port_status & 0xf) != 0x03) { + printf("No Link on this port!\n"); + return -1; + } + + mem = malloc(AHCI_PORT_PRIV_DMA_SZ + 2048); + if (!mem) { + free(pp); + printf("%s: No mem for table!\n", __func__); + return -ENOMEM; + } + + /* Aligned to 2048-bytes */ + mem = memalign(2048, AHCI_PORT_PRIV_DMA_SZ); + memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ); + + /* + * First item in chunk of DMA memory: 32-slot command table, + * 32 bytes each in size + */ + pp->cmd_slot = + (struct ahci_cmd_hdr *)(uintptr_t)virt_to_phys((void *)mem); + debug("cmd_slot = %p\n", pp->cmd_slot); + mem += (AHCI_CMD_SLOT_SZ + 224); + + /* + * Second item: Received-FIS area + */ + pp->rx_fis = virt_to_phys((void *)mem); + mem += AHCI_RX_FIS_SZ; + + /* + * Third item: data area for storing a single command + * and its scatter-gather table + */ + pp->cmd_tbl = virt_to_phys((void *)mem); + debug("cmd_tbl_dma = %lx\n", pp->cmd_tbl); + + mem += AHCI_CMD_TBL_HDR; + pp->cmd_tbl_sg = + (struct ahci_sg *)(uintptr_t)virt_to_phys((void *)mem); + + writel_with_flush((unsigned long)pp->cmd_slot, + port_mmio + PORT_LST_ADDR); + + writel_with_flush(pp->rx_fis, port_mmio + PORT_FIS_ADDR); + +#ifdef CONFIG_SUNXI_AHCI + sunxi_dma_init(port_mmio); +#endif + + writel_with_flush(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX | + PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP | + PORT_CMD_START, port_mmio + PORT_CMD); + + debug("Exit start port %d\n", port); + + /* + * Make sure interface is not busy based on error and status + * information from task file data register before proceeding + */ + return wait_spinup(port_mmio); +} + + +static int ahci_device_data_io(u8 port, u8 *fis, int fis_len, u8 *buf, + int buf_len, u8 is_write) +{ + + struct ahci_ioports *pp = &(probe_ent->port[port]); + void __iomem *port_mmio = pp->port_mmio; + u32 opts; + u32 port_status; + int sg_count; + + debug("Enter %s: for port %d\n", __func__, port); + + if (port > probe_ent->n_ports) { + printf("Invalid port number %d\n", port); + return -1; + } + + port_status = readl(port_mmio + PORT_SCR_STAT); + if ((port_status & 0xf) != 0x03) { + debug("No Link on port %d!\n", port); + return -1; + } + + memcpy((unsigned char *)pp->cmd_tbl, fis, fis_len); + + sg_count = ahci_fill_sg(port, buf, buf_len); + opts = (fis_len >> 2) | (sg_count << 16) | (is_write << 6); + ahci_fill_cmd_slot(pp, opts); + + ahci_dcache_flush_sata_cmd(pp); + ahci_dcache_flush_range((unsigned long)buf, (unsigned long)buf_len); + + writel_with_flush(1, port_mmio + PORT_CMD_ISSUE); + + if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, + WAIT_MS_DATAIO, 0x1)) { + printf("timeout exit!\n"); + return -1; + } + + ahci_dcache_invalidate_range((unsigned long)buf, + (unsigned long)buf_len); + debug("%s: %d byte transferred.\n", __func__, pp->cmd_slot->status); + + return 0; +} + + +static char *ata_id_strcpy(u16 *target, u16 *src, int len) +{ + int i; + for (i = 0; i < len / 2; i++) + target[i] = swab16(src[i]); + return (char *)target; +} + +/* + * SCSI INQUIRY command operation. + */ +static int ata_scsiop_inquiry(ccb *pccb) +{ + static const u8 hdr[] = { + 0, + 0, + 0x5, /* claim SPC-3 version compatibility */ + 2, + 95 - 4, + }; + u8 fis[20]; + u16 *idbuf; + ALLOC_CACHE_ALIGN_BUFFER(u16, tmpid, ATA_ID_WORDS); + u8 port; + + /* Clean ccb data buffer */ + memset(pccb->pdata, 0, pccb->datalen); + + memcpy(pccb->pdata, hdr, sizeof(hdr)); + + if (pccb->datalen <= 35) + return 0; + + memset(fis, 0, sizeof(fis)); + /* Construct the FIS */ + fis[0] = 0x27; /* Host to device FIS. */ + fis[1] = 1 << 7; /* Command FIS. */ + fis[2] = ATA_CMD_ID_ATA; /* Command byte. */ + + /* Read id from sata */ + port = pccb->target; + + if (ahci_device_data_io(port, (u8 *) &fis, sizeof(fis), (u8 *)tmpid, + ATA_ID_WORDS * 2, 0)) { + debug("scsi_ahci: SCSI inquiry command failure.\n"); + return -EIO; + } + + if (!ataid[port]) { + ataid[port] = malloc(ATA_ID_WORDS * 2); + if (!ataid[port]) { + printf("%s: No memory for ataid[port]\n", __func__); + return -ENOMEM; + } + } + + idbuf = ataid[port]; + + memcpy(idbuf, tmpid, ATA_ID_WORDS * 2); + ata_swap_buf_le16(idbuf, ATA_ID_WORDS); + + memcpy(&pccb->pdata[8], "ATA ", 8); + ata_id_strcpy((u16 *)&pccb->pdata[16], &idbuf[ATA_ID_PROD], 16); + ata_id_strcpy((u16 *)&pccb->pdata[32], &idbuf[ATA_ID_FW_REV], 4); + +#ifdef DEBUG + ata_dump_id(idbuf); +#endif + return 0; +} + + +/* + * SCSI READ10/WRITE10 command operation. + */ +static int ata_scsiop_read_write(ccb *pccb, u8 is_write) +{ + lbaint_t lba = 0; + u16 blocks = 0; + u8 fis[20]; + u8 *user_buffer = pccb->pdata; + u32 user_buffer_size = pccb->datalen; + + /* Retrieve the base LBA number from the ccb structure. */ + if (pccb->cmd[0] == SCSI_READ16) { + memcpy(&lba, pccb->cmd + 2, 8); + lba = be64_to_cpu(lba); + } else { + u32 temp; + memcpy(&temp, pccb->cmd + 2, 4); + lba = be32_to_cpu(temp); + } + + /* + * Retrieve the base LBA number and the block count from + * the ccb structure. + * + * For 10-byte and 16-byte SCSI R/W commands, transfer + * length 0 means transfer 0 block of data. + * However, for ATA R/W commands, sector count 0 means + * 256 or 65536 sectors, not 0 sectors as in SCSI. + * + * WARNING: one or two older ATA drives treat 0 as 0... + */ + if (pccb->cmd[0] == SCSI_READ16) + blocks = (((u16)pccb->cmd[13]) << 8) | ((u16) pccb->cmd[14]); + else + blocks = (((u16)pccb->cmd[7]) << 8) | ((u16) pccb->cmd[8]); + + debug("scsi_ahci: %s %u blocks starting from lba 0x" LBAFU "\n", + is_write ? "write" : "read", blocks, lba); + + /* Preset the FIS */ + memset(fis, 0, sizeof(fis)); + fis[0] = 0x27; /* Host to device FIS. */ + fis[1] = 1 << 7; /* Command FIS. */ + /* Command byte (read/write). */ + fis[2] = is_write ? ATA_CMD_WRITE_EXT : ATA_CMD_READ_EXT; + + while (blocks) { + u16 now_blocks; /* number of blocks per iteration */ + u32 transfer_size; /* number of bytes per iteration */ + + now_blocks = min((u16)MAX_SATA_BLOCKS_READ_WRITE, blocks); + + transfer_size = ATA_SECT_SIZE * now_blocks; + if (transfer_size > user_buffer_size) { + printf("scsi_ahci: Error: buffer too small.\n"); + return -EIO; + } + + /* + * LBA48 SATA command but only use 32bit address range within + * that (unless we've enabled 64bit LBA support). The next + * smaller command range (28bit) is too small. + */ + fis[4] = (lba >> 0) & 0xff; + fis[5] = (lba >> 8) & 0xff; + fis[6] = (lba >> 16) & 0xff; + fis[7] = 1 << 6; /* device reg: set LBA mode */ + fis[8] = ((lba >> 24) & 0xff); +#ifdef CONFIG_SYS_64BIT_LBA + if (pccb->cmd[0] == SCSI_READ16) { + fis[9] = ((lba >> 32) & 0xff); + fis[10] = ((lba >> 40) & 0xff); + } +#endif + + fis[3] = 0xe0; /* features */ + + /* Block (sector) count */ + fis[12] = (now_blocks >> 0) & 0xff; + fis[13] = (now_blocks >> 8) & 0xff; + + /* Read/Write from ahci */ + if (ahci_device_data_io(pccb->target, (u8 *) &fis, sizeof(fis), + user_buffer, transfer_size, + is_write)) { + debug("scsi_ahci: SCSI %s10 command failure.\n", + is_write ? "WRITE" : "READ"); + return -EIO; + } + + /* If this transaction is a write, do a following flush. + * Writes in u-boot are so rare, and the logic to know when is + * the last write and do a flush only there is sufficiently + * difficult. Just do a flush after every write. This incurs, + * usually, one extra flush when the rare writes do happen. + */ + if (is_write) { + if (-EIO == ata_io_flush(pccb->target)) + return -EIO; + } + user_buffer += transfer_size; + user_buffer_size -= transfer_size; + blocks -= now_blocks; + lba += now_blocks; + } + + return 0; +} + + +/* + * SCSI READ CAPACITY10 command operation. + */ +static int ata_scsiop_read_capacity10(ccb *pccb) +{ + u32 cap; + u64 cap64; + u32 block_size; + + if (!ataid[pccb->target]) { + printf("scsi_ahci: SCSI READ CAPACITY10 command failure. " + "\tNo ATA info!\n" + "\tPlease run SCSI command INQUIRY first!\n"); + return -EPERM; + } + + cap64 = ata_id_n_sectors(ataid[pccb->target]); + if (cap64 > 0x100000000ULL) + cap64 = 0xffffffff; + + cap = cpu_to_be32(cap64); + memcpy(pccb->pdata, &cap, sizeof(cap)); + + block_size = cpu_to_be32((u32)512); + memcpy(&pccb->pdata[4], &block_size, 4); + + return 0; +} + + +/* + * SCSI READ CAPACITY16 command operation. + */ +static int ata_scsiop_read_capacity16(ccb *pccb) +{ + u64 cap; + u64 block_size; + + if (!ataid[pccb->target]) { + printf("scsi_ahci: SCSI READ CAPACITY16 command failure. " + "\tNo ATA info!\n" + "\tPlease run SCSI command INQUIRY first!\n"); + return -EPERM; + } + + cap = ata_id_n_sectors(ataid[pccb->target]); + cap = cpu_to_be64(cap); + memcpy(pccb->pdata, &cap, sizeof(cap)); + + block_size = cpu_to_be64((u64)512); + memcpy(&pccb->pdata[8], &block_size, 8); + + return 0; +} + + +/* + * SCSI TEST UNIT READY command operation. + */ +static int ata_scsiop_test_unit_ready(ccb *pccb) +{ + return (ataid[pccb->target]) ? 0 : -EPERM; +} + + +int scsi_exec(ccb *pccb) +{ + int ret; + + switch (pccb->cmd[0]) { + case SCSI_READ16: + case SCSI_READ10: + ret = ata_scsiop_read_write(pccb, 0); + break; + case SCSI_WRITE10: + ret = ata_scsiop_read_write(pccb, 1); + break; + case SCSI_RD_CAPAC10: + ret = ata_scsiop_read_capacity10(pccb); + break; + case SCSI_RD_CAPAC16: + ret = ata_scsiop_read_capacity16(pccb); + break; + case SCSI_TST_U_RDY: + ret = ata_scsiop_test_unit_ready(pccb); + break; + case SCSI_INQUIRY: + ret = ata_scsiop_inquiry(pccb); + break; + default: + printf("Unsupport SCSI command 0x%02x\n", pccb->cmd[0]); + return false; + } + + if (ret) { + debug("SCSI command 0x%02x ret errno %d\n", pccb->cmd[0], ret); + return false; + } + return true; + +} + +#if defined(CONFIG_DM_SCSI) +void scsi_low_level_init(int busdevfunc, struct udevice *dev) +#else +void scsi_low_level_init(int busdevfunc) +#endif +{ + int i; + u32 linkmap; + +#ifndef CONFIG_SCSI_AHCI_PLAT +# if defined(CONFIG_DM_PCI) + struct udevice *dev; + int ret; + + ret = dm_pci_bus_find_bdf(busdevfunc, &dev); + if (ret) + return; + ahci_init_one(dev); +# elif defined(CONFIG_DM_SCSI) + ahci_init_one(dev); +# else + ahci_init_one(busdevfunc); +# endif +#endif + + linkmap = probe_ent->link_port_map; + + for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) { + if (((linkmap >> i) & 0x01)) { + if (ahci_port_start((u8) i)) { + printf("Can not start port %d\n", i); + continue; + } + } + } +} + +#ifdef CONFIG_SCSI_AHCI_PLAT +int ahci_init(void __iomem *base) +{ + int i, rc = 0; + u32 linkmap; + + probe_ent = malloc(sizeof(struct ahci_probe_ent)); + if (!probe_ent) { + printf("%s: No memory for probe_ent\n", __func__); + return -ENOMEM; + } + + memset(probe_ent, 0, sizeof(struct ahci_probe_ent)); + + probe_ent->host_flags = ATA_FLAG_SATA + | ATA_FLAG_NO_LEGACY + | ATA_FLAG_MMIO + | ATA_FLAG_PIO_DMA + | ATA_FLAG_NO_ATAPI; + probe_ent->pio_mask = 0x1f; + probe_ent->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */ + + probe_ent->mmio_base = base; + + /* initialize adapter */ + rc = ahci_host_init(probe_ent); + if (rc) + goto err_out; + + ahci_print_info(probe_ent); + + linkmap = probe_ent->link_port_map; + + for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) { + if (((linkmap >> i) & 0x01)) { + if (ahci_port_start((u8) i)) { + printf("Can not start port %d\n", i); + continue; + } + } + } +err_out: + return rc; +} + +void __weak scsi_init(void) +{ +} + +#endif + +/* + * In the general case of generic rotating media it makes sense to have a + * flush capability. It probably even makes sense in the case of SSDs because + * one cannot always know for sure what kind of internal cache/flush mechanism + * is embodied therein. At first it was planned to invoke this after the last + * write to disk and before rebooting. In practice, knowing, a priori, which + * is the last write is difficult. Because writing to the disk in u-boot is + * very rare, this flush command will be invoked after every block write. + */ +static int ata_io_flush(u8 port) +{ + u8 fis[20]; + struct ahci_ioports *pp = &(probe_ent->port[port]); + void __iomem *port_mmio = pp->port_mmio; + u32 cmd_fis_len = 5; /* five dwords */ + + /* Preset the FIS */ + memset(fis, 0, 20); + fis[0] = 0x27; /* Host to device FIS. */ + fis[1] = 1 << 7; /* Command FIS. */ + fis[2] = ATA_CMD_FLUSH_EXT; + + memcpy((unsigned char *)pp->cmd_tbl, fis, 20); + ahci_fill_cmd_slot(pp, cmd_fis_len); + ahci_dcache_flush_sata_cmd(pp); + writel_with_flush(1, port_mmio + PORT_CMD_ISSUE); + + if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, + WAIT_MS_FLUSH, 0x1)) { + debug("scsi_ahci: flush command timeout on port %d.\n", port); + return -EIO; + } + + return 0; +} + + +__weak void scsi_bus_reset(void) +{ + /*Not implement*/ +} diff --git a/drivers/ata/dwc_ahci.c b/drivers/ata/dwc_ahci.c new file mode 100644 index 0000000000..3f839bf987 --- /dev/null +++ b/drivers/ata/dwc_ahci.c @@ -0,0 +1,101 @@ +/* + * DWC SATA platform driver + * + * (C) Copyright 2016 + * Texas Instruments Incorporated, + * + * Author: Mugunthan V N + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +struct dwc_ahci_priv { + void *base; + void *wrapper_base; +}; + +static int dwc_ahci_ofdata_to_platdata(struct udevice *dev) +{ + struct dwc_ahci_priv *priv = dev_get_priv(dev); + struct scsi_platdata *plat = dev_get_platdata(dev); + fdt_addr_t addr; + + plat->max_id = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev), + "max-id", CONFIG_SYS_SCSI_MAX_SCSI_ID); + plat->max_lun = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev), + "max-lun", CONFIG_SYS_SCSI_MAX_LUN); + + priv->base = map_physmem(devfdt_get_addr(dev), sizeof(void *), + MAP_NOCACHE); + + addr = devfdt_get_addr_index(dev, 1); + if (addr != FDT_ADDR_T_NONE) { + priv->wrapper_base = map_physmem(addr, sizeof(void *), + MAP_NOCACHE); + } else { + priv->wrapper_base = NULL; + } + + return 0; +} + +static int dwc_ahci_probe(struct udevice *dev) +{ + struct dwc_ahci_priv *priv = dev_get_priv(dev); + int ret; + struct phy phy; + + ret = generic_phy_get_by_name(dev, "sata-phy", &phy); + if (ret) { + error("can't get the phy from DT\n"); + return ret; + } + + ret = generic_phy_init(&phy); + if (ret) { + error("unable to initialize the sata phy\n"); + return ret; + } + + ret = generic_phy_power_on(&phy); + if (ret) { + error("unable to power on the sata phy\n"); + return ret; + } + + if (priv->wrapper_base) { + u32 val = TI_SATA_IDLE_NO | TI_SATA_STANDBY_NO; + + /* Enable SATA module, No Idle, No Standby */ + writel(val, priv->wrapper_base + TI_SATA_SYSCONFIG); + } + + return ahci_init(priv->base); +} + +static const struct udevice_id dwc_ahci_ids[] = { + { .compatible = "snps,dwc-ahci" }, + { } +}; + +U_BOOT_DRIVER(dwc_ahci) = { + .name = "dwc_ahci", + .id = UCLASS_SCSI, + .of_match = dwc_ahci_ids, + .ofdata_to_platdata = dwc_ahci_ofdata_to_platdata, + .probe = dwc_ahci_probe, + .priv_auto_alloc_size = sizeof(struct dwc_ahci_priv), + .platdata_auto_alloc_size = sizeof(struct scsi_platdata), + .flags = DM_FLAG_ALLOC_PRIV_DMA, +}; diff --git a/drivers/ata/dwc_ahsata.c b/drivers/ata/dwc_ahsata.c new file mode 100644 index 0000000000..c306e927db --- /dev/null +++ b/drivers/ata/dwc_ahsata.c @@ -0,0 +1,1018 @@ +/* + * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. + * Terry Lv + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include "dwc_ahsata.h" + +struct sata_port_regs { + u32 clb; + u32 clbu; + u32 fb; + u32 fbu; + u32 is; + u32 ie; + u32 cmd; + u32 res1[1]; + u32 tfd; + u32 sig; + u32 ssts; + u32 sctl; + u32 serr; + u32 sact; + u32 ci; + u32 sntf; + u32 res2[1]; + u32 dmacr; + u32 res3[1]; + u32 phycr; + u32 physr; +}; + +struct sata_host_regs { + u32 cap; + u32 ghc; + u32 is; + u32 pi; + u32 vs; + u32 ccc_ctl; + u32 ccc_ports; + u32 res1[2]; + u32 cap2; + u32 res2[30]; + u32 bistafr; + u32 bistcr; + u32 bistfctr; + u32 bistsr; + u32 bistdecr; + u32 res3[2]; + u32 oobr; + u32 res4[8]; + u32 timer1ms; + u32 res5[1]; + u32 gparam1r; + u32 gparam2r; + u32 pparamr; + u32 testr; + u32 versionr; + u32 idr; +}; + +#define MAX_DATA_BYTES_PER_SG (4 * 1024 * 1024) +#define MAX_BYTES_PER_TRANS (AHCI_MAX_SG * MAX_DATA_BYTES_PER_SG) + +#define writel_with_flush(a, b) do { writel(a, b); readl(b); } while (0) + +static int is_ready; + +static inline void __iomem *ahci_port_base(void __iomem *base, u32 port) +{ + return base + 0x100 + (port * 0x80); +} + +static int waiting_for_cmd_completed(u8 *offset, + int timeout_msec, + u32 sign) +{ + int i; + u32 status; + + for (i = 0; + ((status = readl(offset)) & sign) && i < timeout_msec; + ++i) + mdelay(1); + + return (i < timeout_msec) ? 0 : -1; +} + +static int ahci_setup_oobr(struct ahci_probe_ent *probe_ent, + int clk) +{ + struct sata_host_regs *host_mmio = + (struct sata_host_regs *)probe_ent->mmio_base; + + writel(SATA_HOST_OOBR_WE, &(host_mmio->oobr)); + writel(0x02060b14, &(host_mmio->oobr)); + + return 0; +} + +static int ahci_host_init(struct ahci_probe_ent *probe_ent) +{ + u32 tmp, cap_save, num_ports; + int i, j, timeout = 1000; + struct sata_port_regs *port_mmio = NULL; + struct sata_host_regs *host_mmio = + (struct sata_host_regs *)probe_ent->mmio_base; + int clk = mxc_get_clock(MXC_SATA_CLK); + + cap_save = readl(&(host_mmio->cap)); + cap_save |= SATA_HOST_CAP_SSS; + + /* global controller reset */ + tmp = readl(&(host_mmio->ghc)); + if ((tmp & SATA_HOST_GHC_HR) == 0) + writel_with_flush(tmp | SATA_HOST_GHC_HR, &(host_mmio->ghc)); + + while ((readl(&(host_mmio->ghc)) & SATA_HOST_GHC_HR) + && --timeout) + ; + + if (timeout <= 0) { + debug("controller reset failed (0x%x)\n", tmp); + return -1; + } + + /* Set timer 1ms */ + writel(clk / 1000, &(host_mmio->timer1ms)); + + ahci_setup_oobr(probe_ent, 0); + + writel_with_flush(SATA_HOST_GHC_AE, &(host_mmio->ghc)); + writel(cap_save, &(host_mmio->cap)); + num_ports = (cap_save & SATA_HOST_CAP_NP_MASK) + 1; + writel_with_flush((1 << num_ports) - 1, + &(host_mmio->pi)); + + /* + * Determine which Ports are implemented by the DWC_ahsata, + * by reading the PI register. This bit map value aids the + * software to determine how many Ports are available and + * which Port registers need to be initialized. + */ + probe_ent->cap = readl(&(host_mmio->cap)); + probe_ent->port_map = readl(&(host_mmio->pi)); + + /* Determine how many command slots the HBA supports */ + probe_ent->n_ports = + (probe_ent->cap & SATA_HOST_CAP_NP_MASK) + 1; + + debug("cap 0x%x port_map 0x%x n_ports %d\n", + probe_ent->cap, probe_ent->port_map, probe_ent->n_ports); + + for (i = 0; i < probe_ent->n_ports; i++) { + probe_ent->port[i].port_mmio = + ahci_port_base(host_mmio, i); + port_mmio = + (struct sata_port_regs *)probe_ent->port[i].port_mmio; + + /* Ensure that the DWC_ahsata is in idle state */ + tmp = readl(&(port_mmio->cmd)); + + /* + * When P#CMD.ST, P#CMD.CR, P#CMD.FRE and P#CMD.FR + * are all cleared, the Port is in an idle state. + */ + if (tmp & (SATA_PORT_CMD_CR | SATA_PORT_CMD_FR | + SATA_PORT_CMD_FRE | SATA_PORT_CMD_ST)) { + + /* + * System software places a Port into the idle state by + * clearing P#CMD.ST and waiting for P#CMD.CR to return + * 0 when read. + */ + tmp &= ~SATA_PORT_CMD_ST; + writel_with_flush(tmp, &(port_mmio->cmd)); + + /* + * spec says 500 msecs for each bit, so + * this is slightly incorrect. + */ + mdelay(500); + + timeout = 1000; + while ((readl(&(port_mmio->cmd)) & SATA_PORT_CMD_CR) + && --timeout) + ; + + if (timeout <= 0) { + debug("port reset failed (0x%x)\n", tmp); + return -1; + } + } + + /* Spin-up device */ + tmp = readl(&(port_mmio->cmd)); + writel((tmp | SATA_PORT_CMD_SUD), &(port_mmio->cmd)); + + /* Wait for spin-up to finish */ + timeout = 1000; + while (!(readl(&(port_mmio->cmd)) | SATA_PORT_CMD_SUD) + && --timeout) + ; + if (timeout <= 0) { + debug("Spin-Up can't finish!\n"); + return -1; + } + + for (j = 0; j < 100; ++j) { + mdelay(10); + tmp = readl(&(port_mmio->ssts)); + if (((tmp & SATA_PORT_SSTS_DET_MASK) == 0x3) || + ((tmp & SATA_PORT_SSTS_DET_MASK) == 0x1)) + break; + } + + /* Wait for COMINIT bit 26 (DIAG_X) in SERR */ + timeout = 1000; + while (!(readl(&(port_mmio->serr)) | SATA_PORT_SERR_DIAG_X) + && --timeout) + ; + if (timeout <= 0) { + debug("Can't find DIAG_X set!\n"); + return -1; + } + + /* + * For each implemented Port, clear the P#SERR + * register, by writing ones to each implemented\ + * bit location. + */ + tmp = readl(&(port_mmio->serr)); + debug("P#SERR 0x%x\n", + tmp); + writel(tmp, &(port_mmio->serr)); + + /* Ack any pending irq events for this port */ + tmp = readl(&(host_mmio->is)); + debug("IS 0x%x\n", tmp); + if (tmp) + writel(tmp, &(host_mmio->is)); + + writel(1 << i, &(host_mmio->is)); + + /* set irq mask (enables interrupts) */ + writel(DEF_PORT_IRQ, &(port_mmio->ie)); + + /* register linkup ports */ + tmp = readl(&(port_mmio->ssts)); + debug("Port %d status: 0x%x\n", i, tmp); + if ((tmp & SATA_PORT_SSTS_DET_MASK) == 0x03) + probe_ent->link_port_map |= (0x01 << i); + } + + tmp = readl(&(host_mmio->ghc)); + debug("GHC 0x%x\n", tmp); + writel(tmp | SATA_HOST_GHC_IE, &(host_mmio->ghc)); + tmp = readl(&(host_mmio->ghc)); + debug("GHC 0x%x\n", tmp); + + return 0; +} + +static void ahci_print_info(struct ahci_probe_ent *probe_ent) +{ + struct sata_host_regs *host_mmio = + (struct sata_host_regs *)probe_ent->mmio_base; + u32 vers, cap, impl, speed; + const char *speed_s; + const char *scc_s; + + vers = readl(&(host_mmio->vs)); + cap = probe_ent->cap; + impl = probe_ent->port_map; + + speed = (cap & SATA_HOST_CAP_ISS_MASK) + >> SATA_HOST_CAP_ISS_OFFSET; + if (speed == 1) + speed_s = "1.5"; + else if (speed == 2) + speed_s = "3"; + else + speed_s = "?"; + + scc_s = "SATA"; + + printf("AHCI %02x%02x.%02x%02x " + "%u slots %u ports %s Gbps 0x%x impl %s mode\n", + (vers >> 24) & 0xff, + (vers >> 16) & 0xff, + (vers >> 8) & 0xff, + vers & 0xff, + ((cap >> 8) & 0x1f) + 1, + (cap & 0x1f) + 1, + speed_s, + impl, + scc_s); + + printf("flags: " + "%s%s%s%s%s%s" + "%s%s%s%s%s%s%s\n", + cap & (1 << 31) ? "64bit " : "", + cap & (1 << 30) ? "ncq " : "", + cap & (1 << 28) ? "ilck " : "", + cap & (1 << 27) ? "stag " : "", + cap & (1 << 26) ? "pm " : "", + cap & (1 << 25) ? "led " : "", + cap & (1 << 24) ? "clo " : "", + cap & (1 << 19) ? "nz " : "", + cap & (1 << 18) ? "only " : "", + cap & (1 << 17) ? "pmp " : "", + cap & (1 << 15) ? "pio " : "", + cap & (1 << 14) ? "slum " : "", + cap & (1 << 13) ? "part " : ""); +} + +static int ahci_init_one(int pdev) +{ + int rc; + struct ahci_probe_ent *probe_ent = NULL; + + probe_ent = malloc(sizeof(struct ahci_probe_ent)); + memset(probe_ent, 0, sizeof(struct ahci_probe_ent)); + probe_ent->dev = pdev; + + probe_ent->host_flags = ATA_FLAG_SATA + | ATA_FLAG_NO_LEGACY + | ATA_FLAG_MMIO + | ATA_FLAG_PIO_DMA + | ATA_FLAG_NO_ATAPI; + + probe_ent->mmio_base = (void __iomem *)CONFIG_DWC_AHSATA_BASE_ADDR; + + /* initialize adapter */ + rc = ahci_host_init(probe_ent); + if (rc) + goto err_out; + + ahci_print_info(probe_ent); + + /* Save the private struct to block device struct */ + sata_dev_desc[pdev].priv = (void *)probe_ent; + + return 0; + +err_out: + return rc; +} + +static int ahci_fill_sg(struct ahci_probe_ent *probe_ent, + u8 port, unsigned char *buf, int buf_len) +{ + struct ahci_ioports *pp = &(probe_ent->port[port]); + struct ahci_sg *ahci_sg = pp->cmd_tbl_sg; + u32 sg_count, max_bytes; + int i; + + max_bytes = MAX_DATA_BYTES_PER_SG; + sg_count = ((buf_len - 1) / max_bytes) + 1; + if (sg_count > AHCI_MAX_SG) { + printf("Error:Too much sg!\n"); + return -1; + } + + for (i = 0; i < sg_count; i++) { + ahci_sg->addr = + cpu_to_le32((u32)buf + i * max_bytes); + ahci_sg->addr_hi = 0; + ahci_sg->flags_size = cpu_to_le32(0x3fffff & + (buf_len < max_bytes + ? (buf_len - 1) + : (max_bytes - 1))); + ahci_sg++; + buf_len -= max_bytes; + } + + return sg_count; +} + +static void ahci_fill_cmd_slot(struct ahci_ioports *pp, u32 cmd_slot, u32 opts) +{ + struct ahci_cmd_hdr *cmd_hdr = (struct ahci_cmd_hdr *)(pp->cmd_slot + + AHCI_CMD_SLOT_SZ * cmd_slot); + + memset(cmd_hdr, 0, AHCI_CMD_SLOT_SZ); + cmd_hdr->opts = cpu_to_le32(opts); + cmd_hdr->status = 0; + pp->cmd_slot->tbl_addr = cpu_to_le32((u32)pp->cmd_tbl & 0xffffffff); +#ifdef CONFIG_PHYS_64BIT + pp->cmd_slot->tbl_addr_hi = + cpu_to_le32((u32)(((pp->cmd_tbl) >> 16) >> 16)); +#endif +} + +#define AHCI_GET_CMD_SLOT(c) ((c) ? ffs(c) : 0) + +static int ahci_exec_ata_cmd(struct ahci_probe_ent *probe_ent, + u8 port, struct sata_fis_h2d *cfis, + u8 *buf, u32 buf_len, s32 is_write) +{ + struct ahci_ioports *pp = &(probe_ent->port[port]); + struct sata_port_regs *port_mmio = + (struct sata_port_regs *)pp->port_mmio; + u32 opts; + int sg_count = 0, cmd_slot = 0; + + cmd_slot = AHCI_GET_CMD_SLOT(readl(&(port_mmio->ci))); + if (32 == cmd_slot) { + printf("Can't find empty command slot!\n"); + return 0; + } + + /* Check xfer length */ + if (buf_len > MAX_BYTES_PER_TRANS) { + printf("Max transfer length is %dB\n\r", + MAX_BYTES_PER_TRANS); + return 0; + } + + memcpy((u8 *)(pp->cmd_tbl), cfis, sizeof(struct sata_fis_h2d)); + if (buf && buf_len) + sg_count = ahci_fill_sg(probe_ent, port, buf, buf_len); + opts = (sizeof(struct sata_fis_h2d) >> 2) | (sg_count << 16); + if (is_write) { + opts |= 0x40; + flush_cache((ulong)buf, buf_len); + } + ahci_fill_cmd_slot(pp, cmd_slot, opts); + + flush_cache((int)(pp->cmd_slot), AHCI_PORT_PRIV_DMA_SZ); + writel_with_flush(1 << cmd_slot, &(port_mmio->ci)); + + if (waiting_for_cmd_completed((u8 *)&(port_mmio->ci), + 10000, 0x1 << cmd_slot)) { + printf("timeout exit!\n"); + return -1; + } + invalidate_dcache_range((int)(pp->cmd_slot), + (int)(pp->cmd_slot)+AHCI_PORT_PRIV_DMA_SZ); + debug("ahci_exec_ata_cmd: %d byte transferred.\n", + pp->cmd_slot->status); + if (!is_write) + invalidate_dcache_range((ulong)buf, (ulong)buf+buf_len); + + return buf_len; +} + +static void ahci_set_feature(u8 dev, u8 port) +{ + struct ahci_probe_ent *probe_ent = + (struct ahci_probe_ent *)sata_dev_desc[dev].priv; + struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN); + struct sata_fis_h2d *cfis = &h2d; + + memset(cfis, 0, sizeof(struct sata_fis_h2d)); + cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis->pm_port_c = 1 << 7; + cfis->command = ATA_CMD_SET_FEATURES; + cfis->features = SETFEATURES_XFER; + cfis->sector_count = ffs(probe_ent->udma_mask + 1) + 0x3e; + + ahci_exec_ata_cmd(probe_ent, port, cfis, NULL, 0, READ_CMD); +} + +static int ahci_port_start(struct ahci_probe_ent *probe_ent, + u8 port) +{ + struct ahci_ioports *pp = &(probe_ent->port[port]); + struct sata_port_regs *port_mmio = + (struct sata_port_regs *)pp->port_mmio; + u32 port_status; + u32 mem; + int timeout = 10000000; + + debug("Enter start port: %d\n", port); + port_status = readl(&(port_mmio->ssts)); + debug("Port %d status: %x\n", port, port_status); + if ((port_status & 0xf) != 0x03) { + printf("No Link on this port!\n"); + return -1; + } + + mem = (u32)malloc(AHCI_PORT_PRIV_DMA_SZ + 1024); + if (!mem) { + free(pp); + printf("No mem for table!\n"); + return -ENOMEM; + } + + mem = (mem + 0x400) & (~0x3ff); /* Aligned to 1024-bytes */ + memset((u8 *)mem, 0, AHCI_PORT_PRIV_DMA_SZ); + + /* + * First item in chunk of DMA memory: 32-slot command table, + * 32 bytes each in size + */ + pp->cmd_slot = (struct ahci_cmd_hdr *)mem; + debug("cmd_slot = 0x%x\n", (unsigned int) pp->cmd_slot); + mem += (AHCI_CMD_SLOT_SZ * DWC_AHSATA_MAX_CMD_SLOTS); + + /* + * Second item: Received-FIS area, 256-Byte aligned + */ + pp->rx_fis = mem; + mem += AHCI_RX_FIS_SZ; + + /* + * Third item: data area for storing a single command + * and its scatter-gather table + */ + pp->cmd_tbl = mem; + debug("cmd_tbl_dma = 0x%lx\n", pp->cmd_tbl); + + mem += AHCI_CMD_TBL_HDR; + + writel_with_flush(0x00004444, &(port_mmio->dmacr)); + pp->cmd_tbl_sg = (struct ahci_sg *)mem; + writel_with_flush((u32)pp->cmd_slot, &(port_mmio->clb)); + writel_with_flush(pp->rx_fis, &(port_mmio->fb)); + + /* Enable FRE */ + writel_with_flush((SATA_PORT_CMD_FRE | readl(&(port_mmio->cmd))), + &(port_mmio->cmd)); + + /* Wait device ready */ + while ((readl(&(port_mmio->tfd)) & (SATA_PORT_TFD_STS_ERR | + SATA_PORT_TFD_STS_DRQ | SATA_PORT_TFD_STS_BSY)) + && --timeout) + ; + if (timeout <= 0) { + debug("Device not ready for BSY, DRQ and" + "ERR in TFD!\n"); + return -1; + } + + writel_with_flush(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX | + PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP | + PORT_CMD_START, &(port_mmio->cmd)); + + debug("Exit start port %d\n", port); + + return 0; +} + +int init_sata(int dev) +{ + int i; + u32 linkmap; + struct ahci_probe_ent *probe_ent = NULL; + +#if defined(CONFIG_MX6) + if (!is_mx6dq() && !is_mx6dqp()) + return 1; +#endif + if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) { + printf("The sata index %d is out of ranges\n\r", dev); + return -1; + } + + ahci_init_one(dev); + + probe_ent = (struct ahci_probe_ent *)sata_dev_desc[dev].priv; + linkmap = probe_ent->link_port_map; + + if (0 == linkmap) { + printf("No port device detected!\n"); + return 1; + } + + for (i = 0; i < probe_ent->n_ports; i++) { + if ((linkmap >> i) && ((linkmap >> i) & 0x01)) { + if (ahci_port_start(probe_ent, (u8)i)) { + printf("Can not start port %d\n", i); + return 1; + } + probe_ent->hard_port_no = i; + break; + } + } + + return 0; +} + +int reset_sata(int dev) +{ + struct ahci_probe_ent *probe_ent; + struct sata_host_regs *host_mmio; + + if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) { + printf("The sata index %d is out of ranges\n\r", dev); + return -1; + } + + probe_ent = (struct ahci_probe_ent *)sata_dev_desc[dev].priv; + if (NULL == probe_ent) + /* not initialized, so nothing to reset */ + return 0; + + host_mmio = (struct sata_host_regs *)probe_ent->mmio_base; + setbits_le32(&host_mmio->ghc, SATA_HOST_GHC_HR); + while (readl(&host_mmio->ghc) & SATA_HOST_GHC_HR) + udelay(100); + + return 0; +} + +static void dwc_ahsata_print_info(int dev) +{ + struct blk_desc *pdev = &(sata_dev_desc[dev]); + + printf("SATA Device Info:\n\r"); +#ifdef CONFIG_SYS_64BIT_LBA + printf("S/N: %s\n\rProduct model number: %s\n\r" + "Firmware version: %s\n\rCapacity: %lld sectors\n\r", + pdev->product, pdev->vendor, pdev->revision, pdev->lba); +#else + printf("S/N: %s\n\rProduct model number: %s\n\r" + "Firmware version: %s\n\rCapacity: %ld sectors\n\r", + pdev->product, pdev->vendor, pdev->revision, pdev->lba); +#endif +} + +static void dwc_ahsata_identify(int dev, u16 *id) +{ + struct ahci_probe_ent *probe_ent = + (struct ahci_probe_ent *)sata_dev_desc[dev].priv; + struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN); + struct sata_fis_h2d *cfis = &h2d; + u8 port = probe_ent->hard_port_no; + + memset(cfis, 0, sizeof(struct sata_fis_h2d)); + + cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis->pm_port_c = 0x80; /* is command */ + cfis->command = ATA_CMD_ID_ATA; + + ahci_exec_ata_cmd(probe_ent, port, cfis, + (u8 *)id, ATA_ID_WORDS * 2, READ_CMD); + ata_swap_buf_le16(id, ATA_ID_WORDS); +} + +static void dwc_ahsata_xfer_mode(int dev, u16 *id) +{ + struct ahci_probe_ent *probe_ent = + (struct ahci_probe_ent *)sata_dev_desc[dev].priv; + + probe_ent->pio_mask = id[ATA_ID_PIO_MODES]; + probe_ent->udma_mask = id[ATA_ID_UDMA_MODES]; + debug("pio %04x, udma %04x\n\r", + probe_ent->pio_mask, probe_ent->udma_mask); +} + +static u32 dwc_ahsata_rw_cmd(int dev, u32 start, u32 blkcnt, + u8 *buffer, int is_write) +{ + struct ahci_probe_ent *probe_ent = + (struct ahci_probe_ent *)sata_dev_desc[dev].priv; + struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN); + struct sata_fis_h2d *cfis = &h2d; + u8 port = probe_ent->hard_port_no; + u32 block; + + block = start; + + memset(cfis, 0, sizeof(struct sata_fis_h2d)); + + cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis->pm_port_c = 0x80; /* is command */ + cfis->command = (is_write) ? ATA_CMD_WRITE : ATA_CMD_READ; + cfis->device = ATA_LBA; + + cfis->device |= (block >> 24) & 0xf; + cfis->lba_high = (block >> 16) & 0xff; + cfis->lba_mid = (block >> 8) & 0xff; + cfis->lba_low = block & 0xff; + cfis->sector_count = (u8)(blkcnt & 0xff); + + if (ahci_exec_ata_cmd(probe_ent, port, cfis, + buffer, ATA_SECT_SIZE * blkcnt, is_write) > 0) + return blkcnt; + else + return 0; +} + +void dwc_ahsata_flush_cache(int dev) +{ + struct ahci_probe_ent *probe_ent = + (struct ahci_probe_ent *)sata_dev_desc[dev].priv; + struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN); + struct sata_fis_h2d *cfis = &h2d; + u8 port = probe_ent->hard_port_no; + + memset(cfis, 0, sizeof(struct sata_fis_h2d)); + + cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis->pm_port_c = 0x80; /* is command */ + cfis->command = ATA_CMD_FLUSH; + + ahci_exec_ata_cmd(probe_ent, port, cfis, NULL, 0, 0); +} + +static u32 dwc_ahsata_rw_cmd_ext(int dev, u32 start, lbaint_t blkcnt, + u8 *buffer, int is_write) +{ + struct ahci_probe_ent *probe_ent = + (struct ahci_probe_ent *)sata_dev_desc[dev].priv; + struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN); + struct sata_fis_h2d *cfis = &h2d; + u8 port = probe_ent->hard_port_no; + u64 block; + + block = (u64)start; + + memset(cfis, 0, sizeof(struct sata_fis_h2d)); + + cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis->pm_port_c = 0x80; /* is command */ + + cfis->command = (is_write) ? ATA_CMD_WRITE_EXT + : ATA_CMD_READ_EXT; + + cfis->lba_high_exp = (block >> 40) & 0xff; + cfis->lba_mid_exp = (block >> 32) & 0xff; + cfis->lba_low_exp = (block >> 24) & 0xff; + cfis->lba_high = (block >> 16) & 0xff; + cfis->lba_mid = (block >> 8) & 0xff; + cfis->lba_low = block & 0xff; + cfis->device = ATA_LBA; + cfis->sector_count_exp = (blkcnt >> 8) & 0xff; + cfis->sector_count = blkcnt & 0xff; + + if (ahci_exec_ata_cmd(probe_ent, port, cfis, buffer, + ATA_SECT_SIZE * blkcnt, is_write) > 0) + return blkcnt; + else + return 0; +} + +u32 dwc_ahsata_rw_ncq_cmd(int dev, u32 start, lbaint_t blkcnt, + u8 *buffer, int is_write) +{ + struct ahci_probe_ent *probe_ent = + (struct ahci_probe_ent *)sata_dev_desc[dev].priv; + struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN); + struct sata_fis_h2d *cfis = &h2d; + u8 port = probe_ent->hard_port_no; + u64 block; + + if (sata_dev_desc[dev].lba48 != 1) { + printf("execute FPDMA command on non-LBA48 hard disk\n\r"); + return -1; + } + + block = (u64)start; + + memset(cfis, 0, sizeof(struct sata_fis_h2d)); + + cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis->pm_port_c = 0x80; /* is command */ + + cfis->command = (is_write) ? ATA_CMD_FPDMA_WRITE + : ATA_CMD_FPDMA_READ; + + cfis->lba_high_exp = (block >> 40) & 0xff; + cfis->lba_mid_exp = (block >> 32) & 0xff; + cfis->lba_low_exp = (block >> 24) & 0xff; + cfis->lba_high = (block >> 16) & 0xff; + cfis->lba_mid = (block >> 8) & 0xff; + cfis->lba_low = block & 0xff; + + cfis->device = ATA_LBA; + cfis->features_exp = (blkcnt >> 8) & 0xff; + cfis->features = blkcnt & 0xff; + + /* Use the latest queue */ + ahci_exec_ata_cmd(probe_ent, port, cfis, + buffer, ATA_SECT_SIZE * blkcnt, is_write); + + return blkcnt; +} + +void dwc_ahsata_flush_cache_ext(int dev) +{ + struct ahci_probe_ent *probe_ent = + (struct ahci_probe_ent *)sata_dev_desc[dev].priv; + struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN); + struct sata_fis_h2d *cfis = &h2d; + u8 port = probe_ent->hard_port_no; + + memset(cfis, 0, sizeof(struct sata_fis_h2d)); + + cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis->pm_port_c = 0x80; /* is command */ + cfis->command = ATA_CMD_FLUSH_EXT; + + ahci_exec_ata_cmd(probe_ent, port, cfis, NULL, 0, 0); +} + +static void dwc_ahsata_init_wcache(int dev, u16 *id) +{ + struct ahci_probe_ent *probe_ent = + (struct ahci_probe_ent *)sata_dev_desc[dev].priv; + + if (ata_id_has_wcache(id) && ata_id_wcache_enabled(id)) + probe_ent->flags |= SATA_FLAG_WCACHE; + if (ata_id_has_flush(id)) + probe_ent->flags |= SATA_FLAG_FLUSH; + if (ata_id_has_flush_ext(id)) + probe_ent->flags |= SATA_FLAG_FLUSH_EXT; +} + +u32 ata_low_level_rw_lba48(int dev, u32 blknr, lbaint_t blkcnt, + const void *buffer, int is_write) +{ + u32 start, blks; + u8 *addr; + int max_blks; + + start = blknr; + blks = blkcnt; + addr = (u8 *)buffer; + + max_blks = ATA_MAX_SECTORS_LBA48; + + do { + if (blks > max_blks) { + if (max_blks != dwc_ahsata_rw_cmd_ext(dev, start, + max_blks, addr, is_write)) + return 0; + start += max_blks; + blks -= max_blks; + addr += ATA_SECT_SIZE * max_blks; + } else { + if (blks != dwc_ahsata_rw_cmd_ext(dev, start, + blks, addr, is_write)) + return 0; + start += blks; + blks = 0; + addr += ATA_SECT_SIZE * blks; + } + } while (blks != 0); + + return blkcnt; +} + +u32 ata_low_level_rw_lba28(int dev, u32 blknr, lbaint_t blkcnt, + const void *buffer, int is_write) +{ + u32 start, blks; + u8 *addr; + int max_blks; + + start = blknr; + blks = blkcnt; + addr = (u8 *)buffer; + + max_blks = ATA_MAX_SECTORS; + do { + if (blks > max_blks) { + if (max_blks != dwc_ahsata_rw_cmd(dev, start, + max_blks, addr, is_write)) + return 0; + start += max_blks; + blks -= max_blks; + addr += ATA_SECT_SIZE * max_blks; + } else { + if (blks != dwc_ahsata_rw_cmd(dev, start, + blks, addr, is_write)) + return 0; + start += blks; + blks = 0; + addr += ATA_SECT_SIZE * blks; + } + } while (blks != 0); + + return blkcnt; +} + +int sata_port_status(int dev, int port) +{ + struct sata_port_regs *port_mmio; + struct ahci_probe_ent *probe_ent = NULL; + + if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) + return -EINVAL; + + if (sata_dev_desc[dev].priv == NULL) + return -ENODEV; + + probe_ent = (struct ahci_probe_ent *)sata_dev_desc[dev].priv; + port_mmio = (struct sata_port_regs *)probe_ent->port[port].port_mmio; + + return readl(&(port_mmio->ssts)) & SATA_PORT_SSTS_DET_MASK; +} + +/* + * SATA interface between low level driver and command layer + */ +ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer) +{ + u32 rc; + + if (sata_dev_desc[dev].lba48) + rc = ata_low_level_rw_lba48(dev, blknr, blkcnt, + buffer, READ_CMD); + else + rc = ata_low_level_rw_lba28(dev, blknr, blkcnt, + buffer, READ_CMD); + return rc; +} + +ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer) +{ + u32 rc; + struct ahci_probe_ent *probe_ent = + (struct ahci_probe_ent *)sata_dev_desc[dev].priv; + u32 flags = probe_ent->flags; + + if (sata_dev_desc[dev].lba48) { + rc = ata_low_level_rw_lba48(dev, blknr, blkcnt, + buffer, WRITE_CMD); + if ((flags & SATA_FLAG_WCACHE) && + (flags & SATA_FLAG_FLUSH_EXT)) + dwc_ahsata_flush_cache_ext(dev); + } else { + rc = ata_low_level_rw_lba28(dev, blknr, blkcnt, + buffer, WRITE_CMD); + if ((flags & SATA_FLAG_WCACHE) && + (flags & SATA_FLAG_FLUSH)) + dwc_ahsata_flush_cache(dev); + } + return rc; +} + +int scan_sata(int dev) +{ + u8 serial[ATA_ID_SERNO_LEN + 1] = { 0 }; + u8 firmware[ATA_ID_FW_REV_LEN + 1] = { 0 }; + u8 product[ATA_ID_PROD_LEN + 1] = { 0 }; + u16 *id; + u64 n_sectors; + struct ahci_probe_ent *probe_ent = + (struct ahci_probe_ent *)sata_dev_desc[dev].priv; + u8 port = probe_ent->hard_port_no; + struct blk_desc *pdev = &(sata_dev_desc[dev]); + + id = (u16 *)memalign(ARCH_DMA_MINALIGN, + roundup(ARCH_DMA_MINALIGN, + (ATA_ID_WORDS * 2))); + if (!id) { + printf("id malloc failed\n\r"); + return -1; + } + + /* Identify device to get information */ + dwc_ahsata_identify(dev, id); + + /* Serial number */ + ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial)); + memcpy(pdev->product, serial, sizeof(serial)); + + /* Firmware version */ + ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware)); + memcpy(pdev->revision, firmware, sizeof(firmware)); + + /* Product model */ + ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product)); + memcpy(pdev->vendor, product, sizeof(product)); + + /* Totoal sectors */ + n_sectors = ata_id_n_sectors(id); + pdev->lba = (u32)n_sectors; + + pdev->type = DEV_TYPE_HARDDISK; + pdev->blksz = ATA_SECT_SIZE; + pdev->lun = 0 ; + + /* Check if support LBA48 */ + if (ata_id_has_lba48(id)) { + pdev->lba48 = 1; + debug("Device support LBA48\n\r"); + } + + /* Get the NCQ queue depth from device */ + probe_ent->flags &= (~SATA_FLAG_Q_DEP_MASK); + probe_ent->flags |= ata_id_queue_depth(id); + + /* Get the xfer mode from device */ + dwc_ahsata_xfer_mode(dev, id); + + /* Get the write cache status from device */ + dwc_ahsata_init_wcache(dev, id); + + /* Set the xfer mode to highest speed */ + ahci_set_feature(dev, port); + + free((void *)id); + + dwc_ahsata_print_info(dev); + + is_ready = 1; + + return 0; +} diff --git a/drivers/ata/dwc_ahsata.h b/drivers/ata/dwc_ahsata.h new file mode 100644 index 0000000000..caa2e501f9 --- /dev/null +++ b/drivers/ata/dwc_ahsata.h @@ -0,0 +1,320 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * Terry Lv + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __FSL_SATA_H__ +#define __FSL_SATA_H__ + +#define DWC_AHSATA_MAX_CMD_SLOTS 32 + +/* Max host controller numbers */ +#define SATA_HC_MAX_NUM 4 +/* Max command queue depth per host controller */ +#define DWC_AHSATA_HC_MAX_CMD 32 +/* Max port number per host controller */ +#define SATA_HC_MAX_PORT 16 + +/* Generic Host Register */ + +/* HBA Capabilities Register */ +#define SATA_HOST_CAP_S64A 0x80000000 +#define SATA_HOST_CAP_SNCQ 0x40000000 +#define SATA_HOST_CAP_SSNTF 0x20000000 +#define SATA_HOST_CAP_SMPS 0x10000000 +#define SATA_HOST_CAP_SSS 0x08000000 +#define SATA_HOST_CAP_SALP 0x04000000 +#define SATA_HOST_CAP_SAL 0x02000000 +#define SATA_HOST_CAP_SCLO 0x01000000 +#define SATA_HOST_CAP_ISS_MASK 0x00f00000 +#define SATA_HOST_CAP_ISS_OFFSET 20 +#define SATA_HOST_CAP_SNZO 0x00080000 +#define SATA_HOST_CAP_SAM 0x00040000 +#define SATA_HOST_CAP_SPM 0x00020000 +#define SATA_HOST_CAP_PMD 0x00008000 +#define SATA_HOST_CAP_SSC 0x00004000 +#define SATA_HOST_CAP_PSC 0x00002000 +#define SATA_HOST_CAP_NCS 0x00001f00 +#define SATA_HOST_CAP_CCCS 0x00000080 +#define SATA_HOST_CAP_EMS 0x00000040 +#define SATA_HOST_CAP_SXS 0x00000020 +#define SATA_HOST_CAP_NP_MASK 0x0000001f + +/* Global HBA Control Register */ +#define SATA_HOST_GHC_AE 0x80000000 +#define SATA_HOST_GHC_IE 0x00000002 +#define SATA_HOST_GHC_HR 0x00000001 + +/* Interrupt Status Register */ + +/* Ports Implemented Register */ + +/* AHCI Version Register */ +#define SATA_HOST_VS_MJR_MASK 0xffff0000 +#define SATA_HOST_VS_MJR_OFFSET 16 +#define SATA_HOST_VS_MJR_MNR 0x0000ffff + +/* Command Completion Coalescing Control */ +#define SATA_HOST_CCC_CTL_TV_MASK 0xffff0000 +#define SATA_HOST_CCC_CTL_TV_OFFSET 16 +#define SATA_HOST_CCC_CTL_CC_MASK 0x0000ff00 +#define SATA_HOST_CCC_CTL_CC_OFFSET 8 +#define SATA_HOST_CCC_CTL_INT_MASK 0x000000f8 +#define SATA_HOST_CCC_CTL_INT_OFFSET 3 +#define SATA_HOST_CCC_CTL_EN 0x00000001 + +/* Command Completion Coalescing Ports */ + +/* HBA Capabilities Extended Register */ +#define SATA_HOST_CAP2_APST 0x00000004 + +/* BIST Activate FIS Register */ +#define SATA_HOST_BISTAFR_NCP_MASK 0x0000ff00 +#define SATA_HOST_BISTAFR_NCP_OFFSET 8 +#define SATA_HOST_BISTAFR_PD_MASK 0x000000ff +#define SATA_HOST_BISTAFR_PD_OFFSET 0 + +/* BIST Control Register */ +#define SATA_HOST_BISTCR_FERLB 0x00100000 +#define SATA_HOST_BISTCR_TXO 0x00040000 +#define SATA_HOST_BISTCR_CNTCLR 0x00020000 +#define SATA_HOST_BISTCR_NEALB 0x00010000 +#define SATA_HOST_BISTCR_LLC_MASK 0x00000700 +#define SATA_HOST_BISTCR_LLC_OFFSET 8 +#define SATA_HOST_BISTCR_ERREN 0x00000040 +#define SATA_HOST_BISTCR_FLIP 0x00000020 +#define SATA_HOST_BISTCR_PV 0x00000010 +#define SATA_HOST_BISTCR_PATTERN_MASK 0x0000000f +#define SATA_HOST_BISTCR_PATTERN_OFFSET 0 + +/* BIST FIS Count Register */ + +/* BIST Status Register */ +#define SATA_HOST_BISTSR_FRAMERR_MASK 0x0000ffff +#define SATA_HOST_BISTSR_FRAMERR_OFFSET 0 +#define SATA_HOST_BISTSR_BRSTERR_MASK 0x00ff0000 +#define SATA_HOST_BISTSR_BRSTERR_OFFSET 16 + +/* BIST DWORD Error Count Register */ + +/* OOB Register*/ +#define SATA_HOST_OOBR_WE 0x80000000 +#define SATA_HOST_OOBR_cwMin_MASK 0x7f000000 +#define SATA_HOST_OOBR_cwMAX_MASK 0x00ff0000 +#define SATA_HOST_OOBR_ciMin_MASK 0x0000ff00 +#define SATA_HOST_OOBR_ciMax_MASK 0x000000ff + +/* Timer 1-ms Register */ + +/* Global Parameter 1 Register */ +#define SATA_HOST_GPARAM1R_ALIGN_M 0x80000000 +#define SATA_HOST_GPARAM1R_RX_BUFFER 0x40000000 +#define SATA_HOST_GPARAM1R_PHY_DATA_MASK 0x30000000 +#define SATA_HOST_GPARAM1R_PHY_RST 0x08000000 +#define SATA_HOST_GPARAM1R_PHY_CTRL_MASK 0x07e00000 +#define SATA_HOST_GPARAM1R_PHY_STAT_MASK 0x001f8000 +#define SATA_HOST_GPARAM1R_LATCH_M 0x00004000 +#define SATA_HOST_GPARAM1R_BIST_M 0x00002000 +#define SATA_HOST_GPARAM1R_PHY_TYPE 0x00001000 +#define SATA_HOST_GPARAM1R_RETURN_ERR 0x00000400 +#define SATA_HOST_GPARAM1R_AHB_ENDIAN_MASK 0x00000300 +#define SATA_HOST_GPARAM1R_S_HADDR 0X00000080 +#define SATA_HOST_GPARAM1R_M_HADDR 0X00000040 + +/* Global Parameter 2 Register */ +#define SATA_HOST_GPARAM2R_DEV_CP 0x00004000 +#define SATA_HOST_GPARAM2R_DEV_MP 0x00002000 +#define SATA_HOST_GPARAM2R_DEV_ENCODE_M 0x00001000 +#define SATA_HOST_GPARAM2R_RXOOB_CLK_M 0x00000800 +#define SATA_HOST_GPARAM2R_RXOOB_M 0x00000400 +#define SATA_HOST_GPARAM2R_TX_OOB_M 0x00000200 +#define SATA_HOST_GPARAM2R_RXOOB_CLK_MASK 0x000001ff + +/* Port Parameter Register */ +#define SATA_HOST_PPARAMR_TX_MEM_M 0x00000200 +#define SATA_HOST_PPARAMR_TX_MEM_S 0x00000100 +#define SATA_HOST_PPARAMR_RX_MEM_M 0x00000080 +#define SATA_HOST_PPARAMR_RX_MEM_S 0x00000040 +#define SATA_HOST_PPARAMR_TXFIFO_DEPTH_MASK 0x00000038 +#define SATA_HOST_PPARAMR_RXFIFO_DEPTH_MASK 0x00000007 + +/* Test Register */ +#define SATA_HOST_TESTR_PSEL_MASK 0x00070000 +#define SATA_HOST_TESTR_TEST_IF 0x00000001 + +/* Port Register Descriptions */ +/* Port# Command List Base Address Register */ +#define SATA_PORT_CLB_CLB_MASK 0xfffffc00 + +/* Port# Command List Base Address Upper 32-Bits Register */ + +/* Port# FIS Base Address Register */ +#define SATA_PORT_FB_FB_MASK 0xfffffff0 + +/* Port# FIS Base Address Upper 32-Bits Register */ + +/* Port# Interrupt Status Register */ +#define SATA_PORT_IS_CPDS 0x80000000 +#define SATA_PORT_IS_TFES 0x40000000 +#define SATA_PORT_IS_HBFS 0x20000000 +#define SATA_PORT_IS_HBDS 0x10000000 +#define SATA_PORT_IS_IFS 0x08000000 +#define SATA_PORT_IS_INFS 0x04000000 +#define SATA_PORT_IS_OFS 0x01000000 +#define SATA_PORT_IS_IPMS 0x00800000 +#define SATA_PORT_IS_PRCS 0x00400000 +#define SATA_PORT_IS_DMPS 0x00000080 +#define SATA_PORT_IS_PCS 0x00000040 +#define SATA_PORT_IS_DPS 0x00000020 +#define SATA_PORT_IS_UFS 0x00000010 +#define SATA_PORT_IS_SDBS 0x00000008 +#define SATA_PORT_IS_DSS 0x00000004 +#define SATA_PORT_IS_PSS 0x00000002 +#define SATA_PORT_IS_DHRS 0x00000001 + +/* Port# Interrupt Enable Register */ +#define SATA_PORT_IE_CPDE 0x80000000 +#define SATA_PORT_IE_TFEE 0x40000000 +#define SATA_PORT_IE_HBFE 0x20000000 +#define SATA_PORT_IE_HBDE 0x10000000 +#define SATA_PORT_IE_IFE 0x08000000 +#define SATA_PORT_IE_INFE 0x04000000 +#define SATA_PORT_IE_OFE 0x01000000 +#define SATA_PORT_IE_IPME 0x00800000 +#define SATA_PORT_IE_PRCE 0x00400000 +#define SATA_PORT_IE_DMPE 0x00000080 +#define SATA_PORT_IE_PCE 0x00000040 +#define SATA_PORT_IE_DPE 0x00000020 +#define SATA_PORT_IE_UFE 0x00000010 +#define SATA_PORT_IE_SDBE 0x00000008 +#define SATA_PORT_IE_DSE 0x00000004 +#define SATA_PORT_IE_PSE 0x00000002 +#define SATA_PORT_IE_DHRE 0x00000001 + +/* Port# Command Register */ +#define SATA_PORT_CMD_ICC_MASK 0xf0000000 +#define SATA_PORT_CMD_ASP 0x08000000 +#define SATA_PORT_CMD_ALPE 0x04000000 +#define SATA_PORT_CMD_DLAE 0x02000000 +#define SATA_PORT_CMD_ATAPI 0x01000000 +#define SATA_PORT_CMD_APSTE 0x00800000 +#define SATA_PORT_CMD_ESP 0x00200000 +#define SATA_PORT_CMD_CPD 0x00100000 +#define SATA_PORT_CMD_MPSP 0x00080000 +#define SATA_PORT_CMD_HPCP 0x00040000 +#define SATA_PORT_CMD_PMA 0x00020000 +#define SATA_PORT_CMD_CPS 0x00010000 +#define SATA_PORT_CMD_CR 0x00008000 +#define SATA_PORT_CMD_FR 0x00004000 +#define SATA_PORT_CMD_MPSS 0x00002000 +#define SATA_PORT_CMD_CCS_MASK 0x00001f00 +#define SATA_PORT_CMD_FRE 0x00000010 +#define SATA_PORT_CMD_CLO 0x00000008 +#define SATA_PORT_CMD_POD 0x00000004 +#define SATA_PORT_CMD_SUD 0x00000002 +#define SATA_PORT_CMD_ST 0x00000001 + +/* Port# Task File Data Register */ +#define SATA_PORT_TFD_ERR_MASK 0x0000ff00 +#define SATA_PORT_TFD_STS_MASK 0x000000ff +#define SATA_PORT_TFD_STS_ERR 0x00000001 +#define SATA_PORT_TFD_STS_DRQ 0x00000008 +#define SATA_PORT_TFD_STS_BSY 0x00000080 + +/* Port# Signature Register */ + +/* Port# Serial ATA Status {SStatus} Register */ +#define SATA_PORT_SSTS_IPM_MASK 0x00000f00 +#define SATA_PORT_SSTS_SPD_MASK 0x000000f0 +#define SATA_PORT_SSTS_DET_MASK 0x0000000f + +/* Port# Serial ATA Control {SControl} Register */ +#define SATA_PORT_SCTL_IPM_MASK 0x00000f00 +#define SATA_PORT_SCTL_SPD_MASK 0x000000f0 +#define SATA_PORT_SCTL_DET_MASK 0x0000000f + +/* Port# Serial ATA Error {SError} Register */ +#define SATA_PORT_SERR_DIAG_X 0x04000000 +#define SATA_PORT_SERR_DIAG_F 0x02000000 +#define SATA_PORT_SERR_DIAG_T 0x01000000 +#define SATA_PORT_SERR_DIAG_S 0x00800000 +#define SATA_PORT_SERR_DIAG_H 0x00400000 +#define SATA_PORT_SERR_DIAG_C 0x00200000 +#define SATA_PORT_SERR_DIAG_D 0x00100000 +#define SATA_PORT_SERR_DIAG_B 0x00080000 +#define SATA_PORT_SERR_DIAG_W 0x00040000 +#define SATA_PORT_SERR_DIAG_I 0x00020000 +#define SATA_PORT_SERR_DIAG_N 0x00010000 +#define SATA_PORT_SERR_ERR_E 0x00000800 +#define SATA_PORT_SERR_ERR_P 0x00000400 +#define SATA_PORT_SERR_ERR_C 0x00000200 +#define SATA_PORT_SERR_ERR_T 0x00000100 +#define SATA_PORT_SERR_ERR_M 0x00000002 +#define SATA_PORT_SERR_ERR_I 0x00000001 + +/* Port# Serial ATA Active {SActive} Register */ + +/* Port# Command Issue Register */ + +/* Port# Serial ATA Notification Register */ + +/* Port# DMA Control Register */ +#define SATA_PORT_DMACR_RXABL_MASK 0x0000f000 +#define SATA_PORT_DMACR_TXABL_MASK 0x00000f00 +#define SATA_PORT_DMACR_RXTS_MASK 0x000000f0 +#define SATA_PORT_DMACR_TXTS_MASK 0x0000000f + +/* Port# PHY Control Register */ + +/* Port# PHY Status Register */ + +#define SATA_HC_CMD_HDR_ENTRY_SIZE sizeof(struct cmd_hdr_entry) + +/* DW0 +*/ +#define CMD_HDR_DI_CFL_MASK 0x0000001f +#define CMD_HDR_DI_CFL_OFFSET 0 +#define CMD_HDR_DI_A 0x00000020 +#define CMD_HDR_DI_W 0x00000040 +#define CMD_HDR_DI_P 0x00000080 +#define CMD_HDR_DI_R 0x00000100 +#define CMD_HDR_DI_B 0x00000200 +#define CMD_HDR_DI_C 0x00000400 +#define CMD_HDR_DI_PMP_MASK 0x0000f000 +#define CMD_HDR_DI_PMP_OFFSET 12 +#define CMD_HDR_DI_PRDTL 0xffff0000 +#define CMD_HDR_DI_PRDTL_OFFSET 16 + +/* prde_fis_len +*/ +#define CMD_HDR_PRD_ENTRY_SHIFT 16 +#define CMD_HDR_PRD_ENTRY_MASK 0x003f0000 +#define CMD_HDR_FIS_LEN_SHIFT 2 + +/* attribute +*/ +#define CMD_HDR_ATTR_RES 0x00000800 /* Reserved bit, should be 1 */ +#define CMD_HDR_ATTR_VBIST 0x00000400 /* Vendor BIST */ +/* Snoop enable for all descriptor */ +#define CMD_HDR_ATTR_SNOOP 0x00000200 +#define CMD_HDR_ATTR_FPDMA 0x00000100 /* FPDMA queued command */ +#define CMD_HDR_ATTR_RESET 0x00000080 /* Reset - a SRST or device reset */ +/* BIST - require the host to enter BIST mode */ +#define CMD_HDR_ATTR_BIST 0x00000040 +#define CMD_HDR_ATTR_ATAPI 0x00000020 /* ATAPI command */ +#define CMD_HDR_ATTR_TAG 0x0000001f /* TAG mask */ + +#define FLAGS_DMA 0x00000000 +#define FLAGS_FPDMA 0x00000001 + +#define SATA_FLAG_Q_DEP_MASK 0x0000000f +#define SATA_FLAG_WCACHE 0x00000100 +#define SATA_FLAG_FLUSH 0x00000200 +#define SATA_FLAG_FLUSH_EXT 0x00000400 + +#define READ_CMD 0 +#define WRITE_CMD 1 + +#endif /* __FSL_SATA_H__ */ diff --git a/drivers/ata/fsl_sata.c b/drivers/ata/fsl_sata.c new file mode 100644 index 0000000000..31f7fab8b4 --- /dev/null +++ b/drivers/ata/fsl_sata.c @@ -0,0 +1,854 @@ +/* + * Copyright (C) 2008,2010 Freescale Semiconductor, Inc. + * Dave Liu + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "fsl_sata.h" + +#ifndef CONFIG_SYS_SATA1_FLAGS + #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA +#endif +#ifndef CONFIG_SYS_SATA2_FLAGS + #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA +#endif + +static struct fsl_sata_info fsl_sata_info[] = { +#ifdef CONFIG_SATA1 + {CONFIG_SYS_SATA1, CONFIG_SYS_SATA1_FLAGS}, +#else + {0, 0}, +#endif +#ifdef CONFIG_SATA2 + {CONFIG_SYS_SATA2, CONFIG_SYS_SATA2_FLAGS}, +#else + {0, 0}, +#endif +}; + +static inline void sdelay(unsigned long sec) +{ + unsigned long i; + for (i = 0; i < sec; i++) + mdelay(1000); +} + +static void fsl_sata_dump_sfis(struct sata_fis_d2h *s) +{ + printf("Status FIS dump:\n\r"); + printf("fis_type: %02x\n\r", s->fis_type); + printf("pm_port_i: %02x\n\r", s->pm_port_i); + printf("status: %02x\n\r", s->status); + printf("error: %02x\n\r", s->error); + printf("lba_low: %02x\n\r", s->lba_low); + printf("lba_mid: %02x\n\r", s->lba_mid); + printf("lba_high: %02x\n\r", s->lba_high); + printf("device: %02x\n\r", s->device); + printf("lba_low_exp: %02x\n\r", s->lba_low_exp); + printf("lba_mid_exp: %02x\n\r", s->lba_mid_exp); + printf("lba_high_exp: %02x\n\r", s->lba_high_exp); + printf("res1: %02x\n\r", s->res1); + printf("sector_count: %02x\n\r", s->sector_count); + printf("sector_count_exp: %02x\n\r", s->sector_count_exp); +} + +static int ata_wait_register(unsigned __iomem *addr, u32 mask, + u32 val, u32 timeout_msec) +{ + int i; + u32 temp; + + for (i = 0; (((temp = in_le32(addr)) & mask) != val) + && i < timeout_msec; i++) + mdelay(1); + return (i < timeout_msec) ? 0 : -1; +} + +int init_sata(int dev) +{ + u32 length, align; + cmd_hdr_tbl_t *cmd_hdr; + u32 cda; + u32 val32; + fsl_sata_reg_t __iomem *reg; + u32 sig; + int i; + fsl_sata_t *sata; + + if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) { + printf("the sata index %d is out of ranges\n\r", dev); + return -1; + } + +#ifdef CONFIG_MPC85xx + if ((dev == 0) && (!is_serdes_configured(SATA1))) { + printf("SATA%d [dev = %d] is not enabled\n", dev+1, dev); + return -1; + } + if ((dev == 1) && (!is_serdes_configured(SATA2))) { + printf("SATA%d [dev = %d] is not enabled\n", dev+1, dev); + return -1; + } +#endif + + /* Allocate SATA device driver struct */ + sata = (fsl_sata_t *)malloc(sizeof(fsl_sata_t)); + if (!sata) { + printf("alloc the sata device struct failed\n\r"); + return -1; + } + /* Zero all of the device driver struct */ + memset((void *)sata, 0, sizeof(fsl_sata_t)); + + /* Save the private struct to block device struct */ + sata_dev_desc[dev].priv = (void *)sata; + + snprintf(sata->name, 12, "SATA%d", dev); + + /* Set the controller register base address to device struct */ + reg = (fsl_sata_reg_t *)(fsl_sata_info[dev].sata_reg_base); + sata->reg_base = reg; + + /* Allocate the command header table, 4 bytes aligned */ + length = sizeof(struct cmd_hdr_tbl); + align = SATA_HC_CMD_HDR_TBL_ALIGN; + sata->cmd_hdr_tbl_offset = (void *)malloc(length + align); + if (!sata->cmd_hdr_tbl_offset) { + printf("alloc the command header failed\n\r"); + return -1; + } + + cmd_hdr = (cmd_hdr_tbl_t *)(((u32)sata->cmd_hdr_tbl_offset + align) + & ~(align - 1)); + sata->cmd_hdr = cmd_hdr; + + /* Zero all of the command header table */ + memset((void *)sata->cmd_hdr_tbl_offset, 0, length + align); + + /* Allocate command descriptor for all command */ + length = sizeof(struct cmd_desc) * SATA_HC_MAX_CMD; + align = SATA_HC_CMD_DESC_ALIGN; + sata->cmd_desc_offset = (void *)malloc(length + align); + if (!sata->cmd_desc_offset) { + printf("alloc the command descriptor failed\n\r"); + return -1; + } + sata->cmd_desc = (cmd_desc_t *)(((u32)sata->cmd_desc_offset + align) + & ~(align - 1)); + /* Zero all of command descriptor */ + memset((void *)sata->cmd_desc_offset, 0, length + align); + + /* Link the command descriptor to command header */ + for (i = 0; i < SATA_HC_MAX_CMD; i++) { + cda = ((u32)sata->cmd_desc + SATA_HC_CMD_DESC_SIZE * i) + & ~(CMD_HDR_CDA_ALIGN - 1); + cmd_hdr->cmd_slot[i].cda = cpu_to_le32(cda); + } + + /* To have safe state, force the controller offline */ + val32 = in_le32(®->hcontrol); + val32 &= ~HCONTROL_ONOFF; + val32 |= HCONTROL_FORCE_OFFLINE; + out_le32(®->hcontrol, val32); + + /* Wait the controller offline */ + ata_wait_register(®->hstatus, HSTATUS_ONOFF, 0, 1000); + + /* Set the command header base address to CHBA register to tell DMA */ + out_le32(®->chba, (u32)cmd_hdr & ~0x3); + + /* Snoop for the command header */ + val32 = in_le32(®->hcontrol); + val32 |= HCONTROL_HDR_SNOOP; + out_le32(®->hcontrol, val32); + + /* Disable all of interrupts */ + val32 = in_le32(®->hcontrol); + val32 &= ~HCONTROL_INT_EN_ALL; + out_le32(®->hcontrol, val32); + + /* Clear all of interrupts */ + val32 = in_le32(®->hstatus); + out_le32(®->hstatus, val32); + + /* Set the ICC, no interrupt coalescing */ + out_le32(®->icc, 0x01000000); + + /* No PM attatched, the SATA device direct connect */ + out_le32(®->cqpmp, 0); + + /* Clear SError register */ + val32 = in_le32(®->serror); + out_le32(®->serror, val32); + + /* Clear CER register */ + val32 = in_le32(®->cer); + out_le32(®->cer, val32); + + /* Clear DER register */ + val32 = in_le32(®->der); + out_le32(®->der, val32); + + /* No device detection or initialization action requested */ + out_le32(®->scontrol, 0x00000300); + + /* Configure the transport layer, default value */ + out_le32(®->transcfg, 0x08000016); + + /* Configure the link layer, default value */ + out_le32(®->linkcfg, 0x0000ff34); + + /* Bring the controller online */ + val32 = in_le32(®->hcontrol); + val32 |= HCONTROL_ONOFF; + out_le32(®->hcontrol, val32); + + mdelay(100); + + /* print sata device name */ + if (!dev) + printf("%s ", sata->name); + else + printf(" %s ", sata->name); + + /* Wait PHY RDY signal changed for 500ms */ + ata_wait_register(®->hstatus, HSTATUS_PHY_RDY, + HSTATUS_PHY_RDY, 500); + + /* Check PHYRDY */ + val32 = in_le32(®->hstatus); + if (val32 & HSTATUS_PHY_RDY) { + sata->link = 1; + } else { + sata->link = 0; + printf("(No RDY)\n\r"); + return -1; + } + + /* Wait for signature updated, which is 1st D2H */ + ata_wait_register(®->hstatus, HSTATUS_SIGNATURE, + HSTATUS_SIGNATURE, 10000); + + if (val32 & HSTATUS_SIGNATURE) { + sig = in_le32(®->sig); + debug("Signature updated, the sig =%08x\n\r", sig); + sata->ata_device_type = ata_dev_classify(sig); + } + + /* Check the speed */ + val32 = in_le32(®->sstatus); + if ((val32 & SSTATUS_SPD_MASK) == SSTATUS_SPD_GEN1) + printf("(1.5 Gbps)\n\r"); + else if ((val32 & SSTATUS_SPD_MASK) == SSTATUS_SPD_GEN2) + printf("(3 Gbps)\n\r"); + + return 0; +} + +int reset_sata(int dev) +{ + return 0; +} + +static void fsl_sata_dump_regs(fsl_sata_reg_t __iomem *reg) +{ + printf("\n\rSATA: %08x\n\r", (u32)reg); + printf("CQR: %08x\n\r", in_le32(®->cqr)); + printf("CAR: %08x\n\r", in_le32(®->car)); + printf("CCR: %08x\n\r", in_le32(®->ccr)); + printf("CER: %08x\n\r", in_le32(®->cer)); + printf("CQR: %08x\n\r", in_le32(®->cqr)); + printf("DER: %08x\n\r", in_le32(®->der)); + printf("CHBA: %08x\n\r", in_le32(®->chba)); + printf("HStatus: %08x\n\r", in_le32(®->hstatus)); + printf("HControl: %08x\n\r", in_le32(®->hcontrol)); + printf("CQPMP: %08x\n\r", in_le32(®->cqpmp)); + printf("SIG: %08x\n\r", in_le32(®->sig)); + printf("ICC: %08x\n\r", in_le32(®->icc)); + printf("SStatus: %08x\n\r", in_le32(®->sstatus)); + printf("SError: %08x\n\r", in_le32(®->serror)); + printf("SControl: %08x\n\r", in_le32(®->scontrol)); + printf("SNotification: %08x\n\r", in_le32(®->snotification)); + printf("TransCfg: %08x\n\r", in_le32(®->transcfg)); + printf("TransStatus: %08x\n\r", in_le32(®->transstatus)); + printf("LinkCfg: %08x\n\r", in_le32(®->linkcfg)); + printf("LinkCfg1: %08x\n\r", in_le32(®->linkcfg1)); + printf("LinkCfg2: %08x\n\r", in_le32(®->linkcfg2)); + printf("LinkStatus: %08x\n\r", in_le32(®->linkstatus)); + printf("LinkStatus1: %08x\n\r", in_le32(®->linkstatus1)); + printf("PhyCtrlCfg: %08x\n\r", in_le32(®->phyctrlcfg)); + printf("SYSPR: %08x\n\r", in_be32(®->syspr)); +} + +static int fsl_ata_exec_ata_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis, + int is_ncq, int tag, u8 *buffer, u32 len) +{ + cmd_hdr_entry_t *cmd_hdr; + cmd_desc_t *cmd_desc; + sata_fis_h2d_t *h2d; + prd_entry_t *prde; + u32 ext_c_ddc; + u32 prde_count; + u32 val32; + u32 ttl; + fsl_sata_reg_t __iomem *reg = sata->reg_base; + int i; + + /* Check xfer length */ + if (len > SATA_HC_MAX_XFER_LEN) { + printf("max transfer length is 64MB\n\r"); + return 0; + } + + /* Setup the command descriptor */ + cmd_desc = sata->cmd_desc + tag; + + /* Get the pointer cfis of command descriptor */ + h2d = (sata_fis_h2d_t *)cmd_desc->cfis; + + /* Zero the cfis of command descriptor */ + memset((void *)h2d, 0, SATA_HC_CMD_DESC_CFIS_SIZE); + + /* Copy the cfis from user to command descriptor */ + h2d->fis_type = cfis->fis_type; + h2d->pm_port_c = cfis->pm_port_c; + h2d->command = cfis->command; + + h2d->features = cfis->features; + h2d->features_exp = cfis->features_exp; + + h2d->lba_low = cfis->lba_low; + h2d->lba_mid = cfis->lba_mid; + h2d->lba_high = cfis->lba_high; + h2d->lba_low_exp = cfis->lba_low_exp; + h2d->lba_mid_exp = cfis->lba_mid_exp; + h2d->lba_high_exp = cfis->lba_high_exp; + + if (!is_ncq) { + h2d->sector_count = cfis->sector_count; + h2d->sector_count_exp = cfis->sector_count_exp; + } else { /* NCQ */ + h2d->sector_count = (u8)(tag << 3); + } + + h2d->device = cfis->device; + h2d->control = cfis->control; + + /* Setup the PRD table */ + prde = (prd_entry_t *)cmd_desc->prdt; + memset((void *)prde, 0, sizeof(struct prdt)); + + prde_count = 0; + ttl = len; + for (i = 0; i < SATA_HC_MAX_PRD_DIRECT; i++) { + if (!len) + break; + prde->dba = cpu_to_le32((u32)buffer & ~0x3); + debug("dba = %08x\n\r", (u32)buffer); + + if (len < PRD_ENTRY_MAX_XFER_SZ) { + ext_c_ddc = PRD_ENTRY_DATA_SNOOP | len; + debug("ext_c_ddc1 = %08x, len = %08x\n\r", ext_c_ddc, len); + prde->ext_c_ddc = cpu_to_le32(ext_c_ddc); + prde_count++; + prde++; + break; + } else { + ext_c_ddc = PRD_ENTRY_DATA_SNOOP; /* 4M bytes */ + debug("ext_c_ddc2 = %08x, len = %08x\n\r", ext_c_ddc, len); + prde->ext_c_ddc = cpu_to_le32(ext_c_ddc); + buffer += PRD_ENTRY_MAX_XFER_SZ; + len -= PRD_ENTRY_MAX_XFER_SZ; + prde_count++; + prde++; + } + } + + /* Setup the command slot of cmd hdr */ + cmd_hdr = (cmd_hdr_entry_t *)&sata->cmd_hdr->cmd_slot[tag]; + + cmd_hdr->cda = cpu_to_le32((u32)cmd_desc & ~0x3); + + val32 = prde_count << CMD_HDR_PRD_ENTRY_SHIFT; + val32 |= sizeof(sata_fis_h2d_t); + cmd_hdr->prde_fis_len = cpu_to_le32(val32); + + cmd_hdr->ttl = cpu_to_le32(ttl); + + if (!is_ncq) { + val32 = CMD_HDR_ATTR_RES | CMD_HDR_ATTR_SNOOP; + } else { + val32 = CMD_HDR_ATTR_RES | CMD_HDR_ATTR_SNOOP | CMD_HDR_ATTR_FPDMA; + } + + tag &= CMD_HDR_ATTR_TAG; + val32 |= tag; + + debug("attribute = %08x\n\r", val32); + cmd_hdr->attribute = cpu_to_le32(val32); + + /* Make sure cmd desc and cmd slot valid before command issue */ + sync(); + + /* PMP*/ + val32 = (u32)(h2d->pm_port_c & 0x0f); + out_le32(®->cqpmp, val32); + + /* Wait no active */ + if (ata_wait_register(®->car, (1 << tag), 0, 10000)) + printf("Wait no active time out\n\r"); + + /* Issue command */ + if (!(in_le32(®->cqr) & (1 << tag))) { + val32 = 1 << tag; + out_le32(®->cqr, val32); + } + + /* Wait command completed for 10s */ + if (ata_wait_register(®->ccr, (1 << tag), (1 << tag), 10000)) { + if (!is_ncq) + printf("Non-NCQ command time out\n\r"); + else + printf("NCQ command time out\n\r"); + } + + val32 = in_le32(®->cer); + + if (val32) { + u32 der; + fsl_sata_dump_sfis((struct sata_fis_d2h *)cmd_desc->sfis); + printf("CE at device\n\r"); + fsl_sata_dump_regs(reg); + der = in_le32(®->der); + out_le32(®->cer, val32); + out_le32(®->der, der); + } + + /* Clear complete flags */ + val32 = in_le32(®->ccr); + out_le32(®->ccr, val32); + + return len; +} + +static int fsl_ata_exec_reset_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis, + int tag, u8 *buffer, u32 len) +{ + return 0; +} + +static int fsl_sata_exec_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis, + enum cmd_type command_type, int tag, u8 *buffer, u32 len) +{ + int rc; + + if (tag > SATA_HC_MAX_CMD || tag < 0) { + printf("tag is out of range, tag=%d\n\r", tag); + return -1; + } + + switch (command_type) { + case CMD_ATA: + rc = fsl_ata_exec_ata_cmd(sata, cfis, 0, tag, buffer, len); + return rc; + case CMD_RESET: + rc = fsl_ata_exec_reset_cmd(sata, cfis, tag, buffer, len); + return rc; + case CMD_NCQ: + rc = fsl_ata_exec_ata_cmd(sata, cfis, 1, tag, buffer, len); + return rc; + case CMD_ATAPI: + case CMD_VENDOR_BIST: + case CMD_BIST: + printf("not support now\n\r"); + return -1; + default: + break; + } + + return -1; +} + +static void fsl_sata_identify(int dev, u16 *id) +{ + fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; + struct sata_fis_h2d h2d, *cfis = &h2d; + + memset(cfis, 0, sizeof(struct sata_fis_h2d)); + + cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis->pm_port_c = 0x80; /* is command */ + cfis->command = ATA_CMD_ID_ATA; + + fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, (u8 *)id, ATA_ID_WORDS * 2); + ata_swap_buf_le16(id, ATA_ID_WORDS); +} + +static void fsl_sata_xfer_mode(int dev, u16 *id) +{ + fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; + + sata->pio = id[ATA_ID_PIO_MODES]; + sata->mwdma = id[ATA_ID_MWDMA_MODES]; + sata->udma = id[ATA_ID_UDMA_MODES]; + debug("pio %04x, mwdma %04x, udma %04x\n\r", sata->pio, sata->mwdma, sata->udma); +} + +static void fsl_sata_set_features(int dev) +{ + fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; + struct sata_fis_h2d h2d, *cfis = &h2d; + u8 udma_cap; + + memset(cfis, 0, sizeof(struct sata_fis_h2d)); + + cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis->pm_port_c = 0x80; /* is command */ + cfis->command = ATA_CMD_SET_FEATURES; + cfis->features = SETFEATURES_XFER; + + /* First check the device capablity */ + udma_cap = (u8)(sata->udma & 0xff); + debug("udma_cap %02x\n\r", udma_cap); + + if (udma_cap == ATA_UDMA6) + cfis->sector_count = XFER_UDMA_6; + if (udma_cap == ATA_UDMA5) + cfis->sector_count = XFER_UDMA_5; + if (udma_cap == ATA_UDMA4) + cfis->sector_count = XFER_UDMA_4; + if (udma_cap == ATA_UDMA3) + cfis->sector_count = XFER_UDMA_3; + + fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0); +} + +static u32 fsl_sata_rw_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_write) +{ + fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; + struct sata_fis_h2d h2d, *cfis = &h2d; + u32 block; + + block = start; + + memset(cfis, 0, sizeof(struct sata_fis_h2d)); + + cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis->pm_port_c = 0x80; /* is command */ + cfis->command = (is_write) ? ATA_CMD_WRITE : ATA_CMD_READ; + cfis->device = ATA_LBA; + + cfis->device |= (block >> 24) & 0xf; + cfis->lba_high = (block >> 16) & 0xff; + cfis->lba_mid = (block >> 8) & 0xff; + cfis->lba_low = block & 0xff; + cfis->sector_count = (u8)(blkcnt & 0xff); + + fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, buffer, ATA_SECT_SIZE * blkcnt); + return blkcnt; +} + +static void fsl_sata_flush_cache(int dev) +{ + fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; + struct sata_fis_h2d h2d, *cfis = &h2d; + + memset(cfis, 0, sizeof(struct sata_fis_h2d)); + + cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis->pm_port_c = 0x80; /* is command */ + cfis->command = ATA_CMD_FLUSH; + + fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0); +} + +static u32 fsl_sata_rw_cmd_ext(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_write) +{ + fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; + struct sata_fis_h2d h2d, *cfis = &h2d; + u64 block; + + block = (u64)start; + + memset(cfis, 0, sizeof(struct sata_fis_h2d)); + + cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis->pm_port_c = 0x80; /* is command */ + + cfis->command = (is_write) ? ATA_CMD_WRITE_EXT + : ATA_CMD_READ_EXT; + + cfis->lba_high_exp = (block >> 40) & 0xff; + cfis->lba_mid_exp = (block >> 32) & 0xff; + cfis->lba_low_exp = (block >> 24) & 0xff; + cfis->lba_high = (block >> 16) & 0xff; + cfis->lba_mid = (block >> 8) & 0xff; + cfis->lba_low = block & 0xff; + cfis->device = ATA_LBA; + cfis->sector_count_exp = (blkcnt >> 8) & 0xff; + cfis->sector_count = blkcnt & 0xff; + + fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, buffer, ATA_SECT_SIZE * blkcnt); + return blkcnt; +} + +static u32 fsl_sata_rw_ncq_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer, + int is_write) +{ + fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; + struct sata_fis_h2d h2d, *cfis = &h2d; + int ncq_channel; + u64 block; + + if (sata->lba48 != 1) { + printf("execute FPDMA command on non-LBA48 hard disk\n\r"); + return -1; + } + + block = (u64)start; + + memset(cfis, 0, sizeof(struct sata_fis_h2d)); + + cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis->pm_port_c = 0x80; /* is command */ + + cfis->command = (is_write) ? ATA_CMD_FPDMA_WRITE + : ATA_CMD_FPDMA_READ; + + cfis->lba_high_exp = (block >> 40) & 0xff; + cfis->lba_mid_exp = (block >> 32) & 0xff; + cfis->lba_low_exp = (block >> 24) & 0xff; + cfis->lba_high = (block >> 16) & 0xff; + cfis->lba_mid = (block >> 8) & 0xff; + cfis->lba_low = block & 0xff; + + cfis->device = ATA_LBA; + cfis->features_exp = (blkcnt >> 8) & 0xff; + cfis->features = blkcnt & 0xff; + + if (sata->queue_depth >= SATA_HC_MAX_CMD) + ncq_channel = SATA_HC_MAX_CMD - 1; + else + ncq_channel = sata->queue_depth - 1; + + /* Use the latest queue */ + fsl_sata_exec_cmd(sata, cfis, CMD_NCQ, ncq_channel, buffer, ATA_SECT_SIZE * blkcnt); + return blkcnt; +} + +static void fsl_sata_flush_cache_ext(int dev) +{ + fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; + struct sata_fis_h2d h2d, *cfis = &h2d; + + memset(cfis, 0, sizeof(struct sata_fis_h2d)); + + cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis->pm_port_c = 0x80; /* is command */ + cfis->command = ATA_CMD_FLUSH_EXT; + + fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0); +} + +static void fsl_sata_init_wcache(int dev, u16 *id) +{ + fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; + + if (ata_id_has_wcache(id) && ata_id_wcache_enabled(id)) + sata->wcache = 1; + if (ata_id_has_flush(id)) + sata->flush = 1; + if (ata_id_has_flush_ext(id)) + sata->flush_ext = 1; +} + +static int fsl_sata_get_wcache(int dev) +{ + fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; + return sata->wcache; +} + +static int fsl_sata_get_flush(int dev) +{ + fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; + return sata->flush; +} + +static int fsl_sata_get_flush_ext(int dev) +{ + fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; + return sata->flush_ext; +} + +static u32 ata_low_level_rw_lba48(int dev, u32 blknr, lbaint_t blkcnt, + const void *buffer, int is_write) +{ + u32 start, blks; + u8 *addr; + int max_blks; + + start = blknr; + blks = blkcnt; + addr = (u8 *)buffer; + + max_blks = ATA_MAX_SECTORS_LBA48; + do { + if (blks > max_blks) { + if (fsl_sata_info[dev].flags != FLAGS_FPDMA) + fsl_sata_rw_cmd_ext(dev, start, max_blks, addr, is_write); + else + fsl_sata_rw_ncq_cmd(dev, start, max_blks, addr, is_write); + start += max_blks; + blks -= max_blks; + addr += ATA_SECT_SIZE * max_blks; + } else { + if (fsl_sata_info[dev].flags != FLAGS_FPDMA) + fsl_sata_rw_cmd_ext(dev, start, blks, addr, is_write); + else + fsl_sata_rw_ncq_cmd(dev, start, blks, addr, is_write); + start += blks; + blks = 0; + addr += ATA_SECT_SIZE * blks; + } + } while (blks != 0); + + return blkcnt; +} + +static u32 ata_low_level_rw_lba28(int dev, u32 blknr, u32 blkcnt, + const void *buffer, int is_write) +{ + u32 start, blks; + u8 *addr; + int max_blks; + + start = blknr; + blks = blkcnt; + addr = (u8 *)buffer; + + max_blks = ATA_MAX_SECTORS; + do { + if (blks > max_blks) { + fsl_sata_rw_cmd(dev, start, max_blks, addr, is_write); + start += max_blks; + blks -= max_blks; + addr += ATA_SECT_SIZE * max_blks; + } else { + fsl_sata_rw_cmd(dev, start, blks, addr, is_write); + start += blks; + blks = 0; + addr += ATA_SECT_SIZE * blks; + } + } while (blks != 0); + + return blkcnt; +} + +/* + * SATA interface between low level driver and command layer + */ +ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer) +{ + u32 rc; + fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; + + if (sata->lba48) + rc = ata_low_level_rw_lba48(dev, blknr, blkcnt, buffer, READ_CMD); + else + rc = ata_low_level_rw_lba28(dev, blknr, blkcnt, buffer, READ_CMD); + return rc; +} + +ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer) +{ + u32 rc; + fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; + + if (sata->lba48) { + rc = ata_low_level_rw_lba48(dev, blknr, blkcnt, buffer, WRITE_CMD); + if (fsl_sata_get_wcache(dev) && fsl_sata_get_flush_ext(dev)) + fsl_sata_flush_cache_ext(dev); + } else { + rc = ata_low_level_rw_lba28(dev, blknr, blkcnt, buffer, WRITE_CMD); + if (fsl_sata_get_wcache(dev) && fsl_sata_get_flush(dev)) + fsl_sata_flush_cache(dev); + } + return rc; +} + +int scan_sata(int dev) +{ + fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; + unsigned char serial[ATA_ID_SERNO_LEN + 1]; + unsigned char firmware[ATA_ID_FW_REV_LEN + 1]; + unsigned char product[ATA_ID_PROD_LEN + 1]; + u16 *id; + u64 n_sectors; + + /* if no detected link */ + if (!sata->link) + return -1; + + id = (u16 *)malloc(ATA_ID_WORDS * 2); + if (!id) { + printf("id malloc failed\n\r"); + return -1; + } + + /* Identify device to get information */ + fsl_sata_identify(dev, id); + + /* Serial number */ + ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial)); + memcpy(sata_dev_desc[dev].product, serial, sizeof(serial)); + + /* Firmware version */ + ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware)); + memcpy(sata_dev_desc[dev].revision, firmware, sizeof(firmware)); + + /* Product model */ + ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product)); + memcpy(sata_dev_desc[dev].vendor, product, sizeof(product)); + + /* Totoal sectors */ + n_sectors = ata_id_n_sectors(id); + sata_dev_desc[dev].lba = (u32)n_sectors; + +#ifdef CONFIG_LBA48 + /* Check if support LBA48 */ + if (ata_id_has_lba48(id)) { + sata->lba48 = 1; + debug("Device support LBA48\n\r"); + } else + debug("Device supports LBA28\n\r"); +#endif + + /* Get the NCQ queue depth from device */ + sata->queue_depth = ata_id_queue_depth(id); + + /* Get the xfer mode from device */ + fsl_sata_xfer_mode(dev, id); + + /* Get the write cache status from device */ + fsl_sata_init_wcache(dev, id); + + /* Set the xfer mode to highest speed */ + fsl_sata_set_features(dev); +#ifdef DEBUG + fsl_sata_identify(dev, id); + ata_dump_id(id); +#endif + free((void *)id); + return 0; +} diff --git a/drivers/ata/fsl_sata.h b/drivers/ata/fsl_sata.h new file mode 100644 index 0000000000..18d679e782 --- /dev/null +++ b/drivers/ata/fsl_sata.h @@ -0,0 +1,321 @@ +/* + * Copyright (C) 2007-2008 Freescale Semiconductor, Inc. + * Dave Liu + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __FSL_SATA_H__ +#define __FSL_SATA_H__ + +#define SATA_HC_MAX_NUM 4 /* Max host controller numbers */ +#define SATA_HC_MAX_CMD 16 /* Max command queue depth per host controller */ +#define SATA_HC_MAX_PORT 16 /* Max port number per host controller */ + +/* +* SATA Host Controller Registers +*/ +typedef struct fsl_sata_reg { + /* SATA command registers */ + u32 cqr; /* Command queue register */ + u8 res1[0x4]; + u32 car; /* Command active register */ + u8 res2[0x4]; + u32 ccr; /* Command completed register */ + u8 res3[0x4]; + u32 cer; /* Command error register */ + u8 res4[0x4]; + u32 der; /* Device error register */ + u32 chba; /* Command header base address */ + u32 hstatus; /* Host status register */ + u32 hcontrol; /* Host control register */ + u32 cqpmp; /* Port number queue register */ + u32 sig; /* Signature register */ + u32 icc; /* Interrupt coalescing control register */ + u8 res5[0xc4]; + + /* SATA supperset registers */ + u32 sstatus; /* SATA interface status register */ + u32 serror; /* SATA interface error register */ + u32 scontrol; /* SATA interface control register */ + u32 snotification; /* SATA interface notification register */ + u8 res6[0x30]; + + /* SATA control status registers */ + u32 transcfg; /* Transport layer configuration */ + u32 transstatus; /* Transport layer status */ + u32 linkcfg; /* Link layer configuration */ + u32 linkcfg1; /* Link layer configuration1 */ + u32 linkcfg2; /* Link layer configuration2 */ + u32 linkstatus; /* Link layer status */ + u32 linkstatus1; /* Link layer status1 */ + u32 phyctrlcfg; /* PHY control configuration */ + u8 res7[0x2b0]; + + /* SATA system control registers */ + u32 syspr; /* System priority register - big endian */ + u8 res8[0xbec]; +} __attribute__ ((packed)) fsl_sata_reg_t; + +/* HStatus register +*/ +#define HSTATUS_ONOFF 0x80000000 /* Online/offline status */ +#define HSTATUS_FORCE_OFFLINE 0x40000000 /* In process going offline */ +#define HSTATUS_BIST_ERR 0x20000000 + +/* Fatal error */ +#define HSTATUS_MASTER_ERR 0x00004000 +#define HSTATUS_DATA_UNDERRUN 0x00002000 +#define HSTATUS_DATA_OVERRUN 0x00001000 +#define HSTATUS_CRC_ERR_TX 0x00000800 +#define HSTATUS_CRC_ERR_RX 0x00000400 +#define HSTATUS_FIFO_OVERFLOW_TX 0x00000200 +#define HSTATUS_FIFO_OVERFLOW_RX 0x00000100 +#define HSTATUS_FATAL_ERR_ALL (HSTATUS_MASTER_ERR | \ + HSTATUS_DATA_UNDERRUN | \ + HSTATUS_DATA_OVERRUN | \ + HSTATUS_CRC_ERR_TX | \ + HSTATUS_CRC_ERR_RX | \ + HSTATUS_FIFO_OVERFLOW_TX | \ + HSTATUS_FIFO_OVERFLOW_RX) +/* Interrupt status */ +#define HSTATUS_FATAL_ERR 0x00000020 +#define HSTATUS_PHY_RDY 0x00000010 +#define HSTATUS_SIGNATURE 0x00000008 +#define HSTATUS_SNOTIFY 0x00000004 +#define HSTATUS_DEVICE_ERR 0x00000002 +#define HSTATUS_CMD_COMPLETE 0x00000001 + +/* HControl register +*/ +#define HCONTROL_ONOFF 0x80000000 /* Online or offline request */ +#define HCONTROL_FORCE_OFFLINE 0x40000000 /* Force offline request */ +#define HCONTROL_ENTERPRISE_EN 0x10000000 /* Enterprise mode enabled */ +#define HCONTROL_HDR_SNOOP 0x00000400 /* Command header snoop */ +#define HCONTROL_PMP_ATTACHED 0x00000200 /* Port multiplier attached */ + +/* Interrupt enable */ +#define HCONTROL_FATAL_ERR 0x00000020 +#define HCONTROL_PHY_RDY 0x00000010 +#define HCONTROL_SIGNATURE 0x00000008 +#define HCONTROL_SNOTIFY 0x00000004 +#define HCONTROL_DEVICE_ERR 0x00000002 +#define HCONTROL_CMD_COMPLETE 0x00000001 + +#define HCONTROL_INT_EN_ALL (HCONTROL_FATAL_ERR | \ + HCONTROL_PHY_RDY | \ + HCONTROL_SIGNATURE | \ + HCONTROL_SNOTIFY | \ + HCONTROL_DEVICE_ERR | \ + HCONTROL_CMD_COMPLETE) + +/* SStatus register +*/ +#define SSTATUS_IPM_MASK 0x00000780 +#define SSTATUS_IPM_NOPRESENT 0x00000000 +#define SSTATUS_IPM_ACTIVE 0x00000080 +#define SSTATUS_IPM_PATIAL 0x00000100 +#define SSTATUS_IPM_SLUMBER 0x00000300 + +#define SSTATUS_SPD_MASK 0x000000f0 +#define SSTATUS_SPD_GEN1 0x00000010 +#define SSTATUS_SPD_GEN2 0x00000020 + +#define SSTATUS_DET_MASK 0x0000000f +#define SSTATUS_DET_NODEVICE 0x00000000 +#define SSTATUS_DET_DISCONNECT 0x00000001 +#define SSTATUS_DET_CONNECT 0x00000003 +#define SSTATUS_DET_PHY_OFFLINE 0x00000004 + +/* SControl register +*/ +#define SCONTROL_SPM_MASK 0x0000f000 +#define SCONTROL_SPM_GO_PARTIAL 0x00001000 +#define SCONTROL_SPM_GO_SLUMBER 0x00002000 +#define SCONTROL_SPM_GO_ACTIVE 0x00004000 + +#define SCONTROL_IPM_MASK 0x00000f00 +#define SCONTROL_IPM_NO_RESTRICT 0x00000000 +#define SCONTROL_IPM_PARTIAL 0x00000100 +#define SCONTROL_IPM_SLUMBER 0x00000200 +#define SCONTROL_IPM_PART_SLUM 0x00000300 + +#define SCONTROL_SPD_MASK 0x000000f0 +#define SCONTROL_SPD_NO_RESTRICT 0x00000000 +#define SCONTROL_SPD_GEN1 0x00000010 +#define SCONTROL_SPD_GEN2 0x00000020 + +#define SCONTROL_DET_MASK 0x0000000f +#define SCONTROL_DET_HRESET 0x00000001 +#define SCONTROL_DET_DISABLE 0x00000004 + +/* TransCfg register +*/ +#define TRANSCFG_DFIS_SIZE_SHIFT 16 +#define TRANSCFG_RX_WATER_MARK_MASK 0x0000001f + +/* PhyCtrlCfg register +*/ +#define PHYCTRLCFG_FPRFTI_MASK 0x00000018 +#define PHYCTRLCFG_LOOPBACK_MASK 0x0000000e + +/* +* Command Header Entry +*/ +typedef struct cmd_hdr_entry { + __le32 cda; /* Command Descriptor Address, + 4 bytes aligned */ + __le32 prde_fis_len; /* Number of PRD entries and FIS length */ + __le32 ttl; /* Total transfer length */ + __le32 attribute; /* the attribute of command */ +} __attribute__ ((packed)) cmd_hdr_entry_t; + +#define SATA_HC_CMD_HDR_ENTRY_SIZE sizeof(struct cmd_hdr_entry) + +/* cda +*/ +#define CMD_HDR_CDA_ALIGN 4 + +/* prde_fis_len +*/ +#define CMD_HDR_PRD_ENTRY_SHIFT 16 +#define CMD_HDR_PRD_ENTRY_MASK 0x003f0000 +#define CMD_HDR_FIS_LEN_SHIFT 2 + +/* attribute +*/ +#define CMD_HDR_ATTR_RES 0x00000800 /* Reserved bit, should be 1 */ +#define CMD_HDR_ATTR_VBIST 0x00000400 /* Vendor BIST */ +#define CMD_HDR_ATTR_SNOOP 0x00000200 /* Snoop enable for all descriptor */ +#define CMD_HDR_ATTR_FPDMA 0x00000100 /* FPDMA queued command */ +#define CMD_HDR_ATTR_RESET 0x00000080 /* Reset - a SRST or device reset */ +#define CMD_HDR_ATTR_BIST 0x00000040 /* BIST - require the host to enter BIST mode */ +#define CMD_HDR_ATTR_ATAPI 0x00000020 /* ATAPI command */ +#define CMD_HDR_ATTR_TAG 0x0000001f /* TAG mask */ + +/* command type +*/ +enum cmd_type { + CMD_VENDOR_BIST, + CMD_BIST, + CMD_RESET, /* SRST or device reset */ + CMD_ATAPI, + CMD_NCQ, + CMD_ATA, /* None of all above */ +}; + +/* +* Command Header Table +*/ +typedef struct cmd_hdr_tbl { + cmd_hdr_entry_t cmd_slot[SATA_HC_MAX_CMD]; +} __attribute__ ((packed)) cmd_hdr_tbl_t; + +#define SATA_HC_CMD_HDR_TBL_SIZE sizeof(struct cmd_hdr_tbl) +#define SATA_HC_CMD_HDR_TBL_ALIGN 4 + +/* +* PRD entry - Physical Region Descriptor entry +*/ +typedef struct prd_entry { + __le32 dba; /* Data base address, 4 bytes aligned */ + u32 res1; + u32 res2; + __le32 ext_c_ddc; /* Indirect PRD flags, snoop and data word count */ +} __attribute__ ((packed)) prd_entry_t; + +#define SATA_HC_CMD_DESC_PRD_SIZE sizeof(struct prd_entry) + +/* dba +*/ +#define PRD_ENTRY_DBA_ALIGN 4 + +/* ext_c_ddc +*/ +#define PRD_ENTRY_EXT 0x80000000 /* extension flag */ +#ifdef CONFIG_FSL_SATA_V2 +#define PRD_ENTRY_DATA_SNOOP 0x10000000 /* Data snoop enable */ +#else +#define PRD_ENTRY_DATA_SNOOP 0x00400000 /* Data snoop enable */ +#endif +#define PRD_ENTRY_LEN_MASK 0x003fffff /* Data word count */ + +#define PRD_ENTRY_MAX_XFER_SZ (PRD_ENTRY_LEN_MASK + 1) + +/* + * This SATA host controller supports a max of 16 direct PRD entries, but if use + * chained indirect PRD entries, then the contollers supports upto a max of 63 + * entries including direct and indirect PRD entries. + * The PRDT is an array of 63 PRD entries contigiously, but the PRD entries#15 + * will be setup as an indirect descriptor, pointing to it's next (contigious) + * PRD entries#16. + */ +#define SATA_HC_MAX_PRD 63 /* Max PRD entry numbers per command */ +#define SATA_HC_MAX_PRD_DIRECT 16 /* Direct PRDT entries */ +#define SATA_HC_MAX_PRD_USABLE (SATA_HC_MAX_PRD - 1) +#define SATA_HC_MAX_XFER_LEN 0x4000000 + +/* +* PRDT - Physical Region Descriptor Table +*/ +typedef struct prdt { + prd_entry_t prdt[SATA_HC_MAX_PRD]; +} __attribute__ ((packed)) prdt_t; + +/* +* Command Descriptor +*/ +#define SATA_HC_CMD_DESC_CFIS_SIZE 32 /* bytes */ +#define SATA_HC_CMD_DESC_SFIS_SIZE 32 /* bytes */ +#define SATA_HC_CMD_DESC_ACMD_SIZE 16 /* bytes */ +#define SATA_HC_CMD_DESC_RES 16 /* bytes */ + +typedef struct cmd_desc { + u8 cfis[SATA_HC_CMD_DESC_CFIS_SIZE]; + u8 sfis[SATA_HC_CMD_DESC_SFIS_SIZE]; + u8 acmd[SATA_HC_CMD_DESC_ACMD_SIZE]; + u8 res[SATA_HC_CMD_DESC_RES]; + prd_entry_t prdt[SATA_HC_MAX_PRD]; +} __attribute__ ((packed)) cmd_desc_t; + +#define SATA_HC_CMD_DESC_SIZE sizeof(struct cmd_desc) +#define SATA_HC_CMD_DESC_ALIGN 4 + +/* + * SATA device driver info + */ +typedef struct fsl_sata_info { + u32 sata_reg_base; + u32 flags; +} fsl_sata_info_t; + +#define FLAGS_DMA 0x00000000 +#define FLAGS_FPDMA 0x00000001 + +/* + * SATA device driver struct + */ +typedef struct fsl_sata { + char name[12]; + fsl_sata_reg_t *reg_base; /* the base address of controller register */ + void *cmd_hdr_tbl_offset; /* alloc address of command header table */ + cmd_hdr_tbl_t *cmd_hdr; /* aligned address of command header table */ + void *cmd_desc_offset; /* alloc address of command descriptor */ + cmd_desc_t *cmd_desc; /* aligned address of command descriptor */ + int link; /* PHY link status */ + /* device attribute */ + int ata_device_type; /* device type */ + int lba48; + int queue_depth; /* Max NCQ queue depth */ + u16 pio; + u16 mwdma; + u16 udma; + int wcache; + int flush; + int flush_ext; +} fsl_sata_t; + +#define READ_CMD 0 +#define WRITE_CMD 1 + +#endif /* __FSL_SATA_H__ */ diff --git a/drivers/ata/libata.c b/drivers/ata/libata.c new file mode 100644 index 0000000000..d684270dcd --- /dev/null +++ b/drivers/ata/libata.c @@ -0,0 +1,144 @@ +/* + * Copyright (C) 2008 Freescale Semiconductor, Inc. + * Dave Liu + * port from the libata of linux kernel + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include + +u64 ata_id_n_sectors(u16 *id) +{ + if (ata_id_has_lba(id)) { + if (ata_id_has_lba48(id)) + return ata_id_u64(id, ATA_ID_LBA48_SECTORS); + else + return ata_id_u32(id, ATA_ID_LBA_SECTORS); + } else { + return 0; + } +} + +u32 ata_dev_classify(u32 sig) +{ + u8 lbam, lbah; + + lbam = (sig >> 16) & 0xff; + lbah = (sig >> 24) & 0xff; + + if (((lbam == 0) && (lbah == 0)) || + ((lbam == 0x3c) && (lbah == 0xc3))) + return ATA_DEV_ATA; + + if ((lbam == 0x14) && (lbah == 0xeb)) + return ATA_DEV_ATAPI; + + if ((lbam == 0x69) && (lbah == 0x96)) + return ATA_DEV_PMP; + + return ATA_DEV_UNKNOWN; +} + +static void ata_id_string(const u16 *id, unsigned char *s, + unsigned int ofs, unsigned int len) +{ + unsigned int c; + + while (len > 0) { + c = id[ofs] >> 8; + *s = c; + s++; + + c = id[ofs] & 0xff; + *s = c; + s++; + + ofs++; + len -= 2; + } +} + +void ata_id_c_string(const u16 *id, unsigned char *s, + unsigned int ofs, unsigned int len) +{ + unsigned char *p; + + ata_id_string(id, s, ofs, len - 1); + + p = s + strnlen((char *)s, len - 1); + while (p > s && p[-1] == ' ') + p--; + *p = '\0'; +} + +void ata_dump_id(u16 *id) +{ + unsigned char serial[ATA_ID_SERNO_LEN + 1]; + unsigned char firmware[ATA_ID_FW_REV_LEN + 1]; + unsigned char product[ATA_ID_PROD_LEN + 1]; + u64 n_sectors; + + /* Serial number */ + ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial)); + printf("S/N: %s\n\r", serial); + + /* Firmware version */ + ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware)); + printf("Firmware version: %s\n\r", firmware); + + /* Product model */ + ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product)); + printf("Product model number: %s\n\r", product); + + /* Total sectors of device */ + n_sectors = ata_id_n_sectors(id); + printf("Capablity: %lld sectors\n\r", n_sectors); + + printf ("id[49]: capabilities = 0x%04x\n" + "id[53]: field valid = 0x%04x\n" + "id[63]: mwdma = 0x%04x\n" + "id[64]: pio = 0x%04x\n" + "id[75]: queue depth = 0x%04x\n", + id[49], + id[53], + id[63], + id[64], + id[75]); + + printf ("id[76]: sata capablity = 0x%04x\n" + "id[78]: sata features supported = 0x%04x\n" + "id[79]: sata features enable = 0x%04x\n", + id[76], + id[78], + id[79]); + + printf ("id[80]: major version = 0x%04x\n" + "id[81]: minor version = 0x%04x\n" + "id[82]: command set supported 1 = 0x%04x\n" + "id[83]: command set supported 2 = 0x%04x\n" + "id[84]: command set extension = 0x%04x\n", + id[80], + id[81], + id[82], + id[83], + id[84]); + printf ("id[85]: command set enable 1 = 0x%04x\n" + "id[86]: command set enable 2 = 0x%04x\n" + "id[87]: command set default = 0x%04x\n" + "id[88]: udma = 0x%04x\n" + "id[93]: hardware reset result = 0x%04x\n", + id[85], + id[86], + id[87], + id[88], + id[93]); +} + +void ata_swap_buf_le16(u16 *buf, unsigned int buf_words) +{ + unsigned int i; + + for (i = 0; i < buf_words; i++) + buf[i] = le16_to_cpu(buf[i]); +} diff --git a/drivers/ata/mvsata_ide.c b/drivers/ata/mvsata_ide.c new file mode 100644 index 0000000000..7b6a1558d2 --- /dev/null +++ b/drivers/ata/mvsata_ide.c @@ -0,0 +1,199 @@ +/* + * Copyright (C) 2010 Albert ARIBAUD + * + * Written-by: Albert ARIBAUD + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +#if defined(CONFIG_ORION5X) +#include +#elif defined(CONFIG_KIRKWOOD) +#include +#elif defined(CONFIG_ARCH_MVEBU) +#include +#endif + +/* SATA port registers */ +struct mvsata_port_registers { + u32 reserved0[10]; + u32 edma_cmd; + u32 reserved1[181]; + /* offset 0x300 : ATA Interface registers */ + u32 sstatus; + u32 serror; + u32 scontrol; + u32 ltmode; + u32 phymode3; + u32 phymode4; + u32 reserved2[5]; + u32 phymode1; + u32 phymode2; + u32 bist_cr; + u32 bist_dw1; + u32 bist_dw2; + u32 serrorintrmask; +}; + +/* + * Sanity checks: + * - to compile at all, we need CONFIG_SYS_ATA_BASE_ADDR. + * - for ide_preinit to make sense, we need at least one of + * CONFIG_SYS_ATA_IDE0_OFFSET or CONFIG_SYS_ATA_IDE1_OFFSET; + * - for ide_preinit to be called, we need CONFIG_IDE_PREINIT. + * Fail with an explanation message if these conditions are not met. + * This is particularly important for CONFIG_IDE_PREINIT, because + * its lack would not cause a build error. + */ + +#if !defined(CONFIG_SYS_ATA_BASE_ADDR) +#error CONFIG_SYS_ATA_BASE_ADDR must be defined +#elif !defined(CONFIG_SYS_ATA_IDE0_OFFSET) \ + && !defined(CONFIG_SYS_ATA_IDE1_OFFSET) +#error CONFIG_SYS_ATA_IDE0_OFFSET or CONFIG_SYS_ATA_IDE1_OFFSET \ + must be defined +#elif !defined(CONFIG_IDE_PREINIT) +#error CONFIG_IDE_PREINIT must be defined +#endif + +/* + * Masks and values for SControl DETection and Interface Power Management, + * and for SStatus DETection. + */ + +#define MVSATA_EDMA_CMD_ATA_RST 0x00000004 +#define MVSATA_SCONTROL_DET_MASK 0x0000000F +#define MVSATA_SCONTROL_DET_NONE 0x00000000 +#define MVSATA_SCONTROL_DET_INIT 0x00000001 +#define MVSATA_SCONTROL_IPM_MASK 0x00000F00 +#define MVSATA_SCONTROL_IPM_NO_LP_ALLOWED 0x00000300 +#define MVSATA_SCONTROL_MASK \ + (MVSATA_SCONTROL_DET_MASK|MVSATA_SCONTROL_IPM_MASK) +#define MVSATA_PORT_INIT \ + (MVSATA_SCONTROL_DET_INIT|MVSATA_SCONTROL_IPM_NO_LP_ALLOWED) +#define MVSATA_PORT_USE \ + (MVSATA_SCONTROL_DET_NONE|MVSATA_SCONTROL_IPM_NO_LP_ALLOWED) +#define MVSATA_SSTATUS_DET_MASK 0x0000000F +#define MVSATA_SSTATUS_DET_DEVCOMM 0x00000003 + +/* + * Status codes to return to client callers. Currently, callers ignore + * exact value and only care for zero or nonzero, so no need to make this + * public, it is only #define'd for clarity. + * If/when standard negative codes are implemented in U-Boot, then these + * #defines should be moved to, or replaced by ones from, the common list + * of status codes. + */ + +#define MVSATA_STATUS_OK 0 +#define MVSATA_STATUS_TIMEOUT -1 + +/* + * Registers for SATA MBUS memory windows + */ + +#define MVSATA_WIN_CONTROL(w) (MVEBU_AXP_SATA_BASE + 0x30 + ((w) << 4)) +#define MVSATA_WIN_BASE(w) (MVEBU_AXP_SATA_BASE + 0x34 + ((w) << 4)) + +/* + * Initialize SATA memory windows for Armada XP + */ + +#ifdef CONFIG_ARCH_MVEBU +static void mvsata_ide_conf_mbus_windows(void) +{ + const struct mbus_dram_target_info *dram; + int i; + + dram = mvebu_mbus_dram_info(); + + /* Disable windows, Set Size/Base to 0 */ + for (i = 0; i < 4; i++) { + writel(0, MVSATA_WIN_CONTROL(i)); + writel(0, MVSATA_WIN_BASE(i)); + } + + for (i = 0; i < dram->num_cs; i++) { + const struct mbus_dram_window *cs = dram->cs + i; + writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) | + (dram->mbus_dram_target_id << 4) | 1, + MVSATA_WIN_CONTROL(i)); + writel(cs->base & 0xffff0000, MVSATA_WIN_BASE(i)); + } +} +#endif + +/* + * Initialize one MVSATAHC port: set SControl's IPM to "always active" + * and DET to "reset", then wait for SStatus's DET to become "device and + * comm ok" (or time out after 50 us if no device), then set SControl's + * DET back to "no action". + */ + +static int mvsata_ide_initialize_port(struct mvsata_port_registers *port) +{ + u32 control; + u32 status; + u32 timeleft = 10000; /* wait at most 10 ms for SATA reset to complete */ + + /* Hard reset */ + writel(MVSATA_EDMA_CMD_ATA_RST, &port->edma_cmd); + udelay(25); /* taken from original marvell port */ + writel(0, &port->edma_cmd); + + /* Set control IPM to 3 (no low power) and DET to 1 (initialize) */ + control = readl(&port->scontrol); + control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_INIT; + writel(control, &port->scontrol); + /* Toggle control DET back to 0 (normal operation) */ + control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_USE; + writel(control, &port->scontrol); + /* wait for status DET to become 3 (device and communication OK) */ + while (--timeleft) { + status = readl(&port->sstatus) & MVSATA_SSTATUS_DET_MASK; + if (status == MVSATA_SSTATUS_DET_DEVCOMM) + break; + udelay(1); + } + /* return success or time-out error depending on time left */ + if (!timeleft) + return MVSATA_STATUS_TIMEOUT; + return MVSATA_STATUS_OK; +} + +/* + * ide_preinit() will be called by ide_init in cmd_ide.c and will + * reset the MVSTATHC ports needed by the board. + */ + +int ide_preinit(void) +{ + int ret = MVSATA_STATUS_TIMEOUT; + int status; + +#ifdef CONFIG_ARCH_MVEBU + mvsata_ide_conf_mbus_windows(); +#endif + + /* Enable ATA port 0 (could be SATA port 0 or 1) if declared */ +#if defined(CONFIG_SYS_ATA_IDE0_OFFSET) + status = mvsata_ide_initialize_port( + (struct mvsata_port_registers *) + (CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE0_OFFSET)); + if (status == MVSATA_STATUS_OK) + ret = MVSATA_STATUS_OK; +#endif + /* Enable ATA port 1 (could be SATA port 0 or 1) if declared */ +#if defined(CONFIG_SYS_ATA_IDE1_OFFSET) + status = mvsata_ide_initialize_port( + (struct mvsata_port_registers *) + (CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE1_OFFSET)); + if (status == MVSATA_STATUS_OK) + ret = MVSATA_STATUS_OK; +#endif + /* Return success if at least one port initialization succeeded */ + return ret; +} diff --git a/drivers/ata/mxc_ata.c b/drivers/ata/mxc_ata.c new file mode 100644 index 0000000000..44bb406f4d --- /dev/null +++ b/drivers/ata/mxc_ata.c @@ -0,0 +1,129 @@ +/* + * Freescale iMX51 ATA driver + * + * Copyright (C) 2010 Marek Vasut + * + * Based on code by: + * Mahesh Mahadevan + * + * Based on code from original FSL ATA driver, which is + * part of eCos, the Embedded Configurable Operating System. + * Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +/* MXC ATA register offsets */ +struct mxc_ata_config_regs { + u8 time_off; /* 0x00 */ + u8 time_on; + u8 time_1; + u8 time_2w; + u8 time_2r; + u8 time_ax; + u8 time_pio_rdx; + u8 time_4; + u8 time_9; + u8 time_m; + u8 time_jn; + u8 time_d; + u8 time_k; + u8 time_ack; + u8 time_env; + u8 time_udma_rdx; + u8 time_zah; /* 0x10 */ + u8 time_mlix; + u8 time_dvh; + u8 time_dzfs; + u8 time_dvs; + u8 time_cvh; + u8 time_ss; + u8 time_cyc; + u32 fifo_data_32; /* 0x18 */ + u32 fifo_data_16; + u32 fifo_fill; + u32 ata_control; + u32 interrupt_pending; + u32 interrupt_enable; + u32 interrupt_clear; + u32 fifo_alarm; +}; + +struct mxc_data_hdd_regs { + u32 drive_data; /* 0xa0 */ + u32 drive_features; + u32 drive_sector_count; + u32 drive_sector_num; + u32 drive_cyl_low; + u32 drive_cyl_high; + u32 drive_dev_head; + u32 command; + u32 status; + u32 alt_status; +}; + +/* PIO timing table */ +#define NR_PIO_SPECS 5 +static uint16_t pio_t1[NR_PIO_SPECS] = { 70, 50, 30, 30, 25 }; +static uint16_t pio_t2_8[NR_PIO_SPECS] = { 290, 290, 290, 80, 70 }; +static uint16_t pio_t4[NR_PIO_SPECS] = { 30, 20, 15, 10, 10 }; +static uint16_t pio_t9[NR_PIO_SPECS] = { 20, 15, 10, 10, 10 }; +static uint16_t pio_tA[NR_PIO_SPECS] = { 50, 50, 50, 50, 50 }; + +#define REG2OFF(reg) ((((uint32_t)reg) & 0x3) * 8) +static void set_ata_bus_timing(unsigned char mode) +{ + uint32_t T = 1000000000 / mxc_get_clock(MXC_IPG_CLK); + + struct mxc_ata_config_regs *ata_regs; + ata_regs = (struct mxc_ata_config_regs *)CONFIG_SYS_ATA_BASE_ADDR; + + if (mode >= NR_PIO_SPECS) + return; + + /* Write TIME_OFF/ON/1/2W */ + writeb(3, &ata_regs->time_off); + writeb(3, &ata_regs->time_on); + writeb((pio_t1[mode] + T) / T, &ata_regs->time_1); + writeb((pio_t2_8[mode] + T) / T, &ata_regs->time_2w); + + /* Write TIME_2R/AX/RDX/4 */ + writeb((pio_t2_8[mode] + T) / T, &ata_regs->time_2r); + writeb((pio_tA[mode] + T) / T + 2, &ata_regs->time_ax); + writeb(1, &ata_regs->time_pio_rdx); + writeb((pio_t4[mode] + T) / T, &ata_regs->time_4); + + /* Write TIME_9 ; the rest of timing registers is irrelevant for PIO */ + writeb((pio_t9[mode] + T) / T, &ata_regs->time_9); +} + +int ide_preinit(void) +{ + struct mxc_ata_config_regs *ata_regs; + ata_regs = (struct mxc_ata_config_regs *)CONFIG_SYS_ATA_BASE_ADDR; + + /* 46.3.3.4 @ FSL iMX51 manual */ + /* FIFO normal op., drive reset */ + writel(0x80, &ata_regs->ata_control); + /* FIFO normal op., drive not reset */ + writel(0xc0, &ata_regs->ata_control); + + /* Configure the PIO timing */ + set_ata_bus_timing(CONFIG_MXC_ATA_PIO_MODE); + + /* 46.3.3.4 @ FSL iMX51 manual */ + /* Drive not reset, IORDY handshake */ + writel(0x41, &ata_regs->ata_control); + + return 0; +} diff --git a/drivers/ata/sata.c b/drivers/ata/sata.c new file mode 100644 index 0000000000..42ff5c7755 --- /dev/null +++ b/drivers/ata/sata.c @@ -0,0 +1,117 @@ +/* + * Copyright (C) 2000-2005, DENX Software Engineering + * Wolfgang Denk + * Copyright (C) Procsys. All rights reserved. + * Mushtaq Khan + * + * Copyright (C) 2008 Freescale Semiconductor, Inc. + * Dave Liu + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +struct blk_desc sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE]; + +#ifdef CONFIG_PARTITIONS +struct blk_desc *sata_get_dev(int dev) +{ + return (dev < CONFIG_SYS_SATA_MAX_DEVICE) ? &sata_dev_desc[dev] : NULL; +} +#endif + +#ifdef CONFIG_BLK +static unsigned long sata_bread(struct udevice *dev, lbaint_t start, + lbaint_t blkcnt, void *dst) +{ + return -ENOSYS; +} + +static unsigned long sata_bwrite(struct udevice *dev, lbaint_t start, + lbaint_t blkcnt, const void *buffer) +{ + return -ENOSYS; +} +#else +static unsigned long sata_bread(struct blk_desc *block_dev, lbaint_t start, + lbaint_t blkcnt, void *dst) +{ + return sata_read(block_dev->devnum, start, blkcnt, dst); +} + +static unsigned long sata_bwrite(struct blk_desc *block_dev, lbaint_t start, + lbaint_t blkcnt, const void *buffer) +{ + return sata_write(block_dev->devnum, start, blkcnt, buffer); +} +#endif + +int __sata_initialize(void) +{ + int rc, ret = -1; + int i; + + for (i = 0; i < CONFIG_SYS_SATA_MAX_DEVICE; i++) { + memset(&sata_dev_desc[i], 0, sizeof(struct blk_desc)); + sata_dev_desc[i].if_type = IF_TYPE_SATA; + sata_dev_desc[i].devnum = i; + sata_dev_desc[i].part_type = PART_TYPE_UNKNOWN; + sata_dev_desc[i].type = DEV_TYPE_HARDDISK; + sata_dev_desc[i].lba = 0; + sata_dev_desc[i].blksz = 512; + sata_dev_desc[i].log2blksz = LOG2(sata_dev_desc[i].blksz); +#ifndef CONFIG_BLK + sata_dev_desc[i].block_read = sata_bread; + sata_dev_desc[i].block_write = sata_bwrite; +#endif + rc = init_sata(i); + if (!rc) { + rc = scan_sata(i); + if (!rc && sata_dev_desc[i].lba > 0 && + sata_dev_desc[i].blksz > 0) { + part_init(&sata_dev_desc[i]); + ret = i; + } + } + } + + return ret; +} +int sata_initialize(void) __attribute__((weak, alias("__sata_initialize"))); + +__weak int __sata_stop(void) +{ + int i, err = 0; + + for (i = 0; i < CONFIG_SYS_SATA_MAX_DEVICE; i++) + err |= reset_sata(i); + + if (err) + printf("Could not reset some SATA devices\n"); + + return err; +} +int sata_stop(void) __attribute__((weak, alias("__sata_stop"))); + +#ifdef CONFIG_BLK +static const struct blk_ops sata_blk_ops = { + .read = sata_bread, + .write = sata_bwrite, +}; + +U_BOOT_DRIVER(sata_blk) = { + .name = "sata_blk", + .id = UCLASS_BLK, + .ops = &sata_blk_ops, +}; +#else +U_BOOT_LEGACY_BLK(sata) = { + .if_typename = "sata", + .if_type = IF_TYPE_SATA, + .max_devs = CONFIG_SYS_SATA_MAX_DEVICE, + .desc = sata_dev_desc, +}; +#endif diff --git a/drivers/ata/sata_ceva.c b/drivers/ata/sata_ceva.c new file mode 100644 index 0000000000..0c24fce8dc --- /dev/null +++ b/drivers/ata/sata_ceva.c @@ -0,0 +1,149 @@ +/* + * (C) Copyright 2015 - 2016 Xilinx, Inc. + * Michal Simek + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include +#include +#include +#include +#include + +#include + +/* Vendor Specific Register Offsets */ +#define AHCI_VEND_PCFG 0xA4 +#define AHCI_VEND_PPCFG 0xA8 +#define AHCI_VEND_PP2C 0xAC +#define AHCI_VEND_PP3C 0xB0 +#define AHCI_VEND_PP4C 0xB4 +#define AHCI_VEND_PP5C 0xB8 +#define AHCI_VEND_PAXIC 0xC0 +#define AHCI_VEND_PTC 0xC8 + +/* Vendor Specific Register bit definitions */ +#define PAXIC_ADBW_BW64 0x1 +#define PAXIC_MAWIDD (1 << 8) +#define PAXIC_MARIDD (1 << 16) +#define PAXIC_OTL (0x4 << 20) + +#define PCFG_TPSS_VAL (0x32 << 16) +#define PCFG_TPRS_VAL (0x2 << 12) +#define PCFG_PAD_VAL 0x2 + +#define PPCFG_TTA 0x1FFFE +#define PPCFG_PSSO_EN (1 << 28) +#define PPCFG_PSS_EN (1 << 29) +#define PPCFG_ESDF_EN (1 << 31) + +#define PP2C_CIBGMN 0x0F +#define PP2C_CIBGMX (0x25 << 8) +#define PP2C_CIBGN (0x18 << 16) +#define PP2C_CINMP (0x29 << 24) + +#define PP3C_CWBGMN 0x04 +#define PP3C_CWBGMX (0x0B << 8) +#define PP3C_CWBGN (0x08 << 16) +#define PP3C_CWNMP (0x0F << 24) + +#define PP4C_BMX 0x0a +#define PP4C_BNM (0x08 << 8) +#define PP4C_SFD (0x4a << 16) +#define PP4C_PTST (0x06 << 24) + +#define PP5C_RIT 0x60216 +#define PP5C_RCT (0x7f0 << 20) + +#define PTC_RX_WM_VAL 0x40 +#define PTC_RSVD (1 << 27) + +#define PORT0_BASE 0x100 +#define PORT1_BASE 0x180 + +/* Port Control Register Bit Definitions */ +#define PORT_SCTL_SPD_GEN3 (0x3 << 4) +#define PORT_SCTL_SPD_GEN2 (0x2 << 4) +#define PORT_SCTL_SPD_GEN1 (0x1 << 4) +#define PORT_SCTL_IPM (0x3 << 8) + +#define PORT_BASE 0x100 +#define PORT_OFFSET 0x80 +#define NR_PORTS 2 +#define DRV_NAME "ahci-ceva" +#define CEVA_FLAG_BROKEN_GEN2 1 + +static int ceva_init_sata(ulong mmio) +{ + ulong tmp; + int i; + + /* + * AXI Data bus width to 64 + * Set Mem Addr Read, Write ID for data transfers + * Transfer limit to 72 DWord + */ + tmp = PAXIC_ADBW_BW64 | PAXIC_MAWIDD | PAXIC_MARIDD | PAXIC_OTL; + writel(tmp, mmio + AHCI_VEND_PAXIC); + + /* Set AHCI Enable */ + tmp = readl(mmio + HOST_CTL); + tmp |= HOST_AHCI_EN; + writel(tmp, mmio + HOST_CTL); + + for (i = 0; i < NR_PORTS; i++) { + /* TPSS TPRS scalars, CISE and Port Addr */ + tmp = PCFG_TPSS_VAL | PCFG_TPRS_VAL | (PCFG_PAD_VAL + i); + writel(tmp, mmio + AHCI_VEND_PCFG); + + /* Port Phy Cfg register enables */ + tmp = PPCFG_TTA | PPCFG_PSS_EN | PPCFG_ESDF_EN; + writel(tmp, mmio + AHCI_VEND_PPCFG); + + /* Rx Watermark setting */ + tmp = PTC_RX_WM_VAL | PTC_RSVD; + writel(tmp, mmio + AHCI_VEND_PTC); + + /* Default to Gen 2 Speed and Gen 1 if Gen2 is broken */ + tmp = PORT_SCTL_SPD_GEN3 | PORT_SCTL_IPM; + writel(tmp, mmio + PORT_SCR_CTL + PORT_BASE + PORT_OFFSET * i); + } + return 0; +} + +static int sata_ceva_probe(struct udevice *dev) +{ + struct scsi_platdata *plat = dev_get_platdata(dev); + + ceva_init_sata(plat->base); + return 0; +} + +static const struct udevice_id sata_ceva_ids[] = { + { .compatible = "ceva,ahci-1v84" }, + { } +}; + +static int sata_ceva_ofdata_to_platdata(struct udevice *dev) +{ + struct scsi_platdata *plat = dev_get_platdata(dev); + + plat->base = devfdt_get_addr(dev); + if (plat->base == FDT_ADDR_T_NONE) + return -EINVAL; + + /* Hardcode number for ceva sata controller */ + plat->max_lun = 1; /* Actually two but untested */ + plat->max_id = 2; + + return 0; +} + +U_BOOT_DRIVER(ceva_host_blk) = { + .name = "ceva_sata", + .id = UCLASS_SCSI, + .of_match = sata_ceva_ids, + .probe = sata_ceva_probe, + .ofdata_to_platdata = sata_ceva_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct scsi_platdata), +}; diff --git a/drivers/ata/sata_dwc.c b/drivers/ata/sata_dwc.c new file mode 100644 index 0000000000..a226ca2dec --- /dev/null +++ b/drivers/ata/sata_dwc.c @@ -0,0 +1,2076 @@ +/* + * sata_dwc.c + * + * Synopsys DesignWare Cores (DWC) SATA host driver + * + * Author: Mark Miesfeld + * + * Ported from 2.6.19.2 to 2.6.25/26 by Stefan Roese + * Copyright 2008 DENX Software Engineering + * + * Based on versions provided by AMCC and Synopsys which are: + * Copyright 2006 Applied Micro Circuits Corporation + * COPYRIGHT (C) 2005 SYNOPSYS, INC. ALL RIGHTS RESERVED + * + * SPDX-License-Identifier: GPL-2.0+ + */ +/* + * SATA support based on the chip canyonlands. + * + * 04-17-2009 + * The local version of this driver for the canyonlands board + * does not use interrupts but polls the chip instead. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sata_dwc.h" + +#define DMA_NUM_CHANS 1 +#define DMA_NUM_CHAN_REGS 8 + +#define AHB_DMA_BRST_DFLT 16 + +struct dmareg { + u32 low; + u32 high; +}; + +struct dma_chan_regs { + struct dmareg sar; + struct dmareg dar; + struct dmareg llp; + struct dmareg ctl; + struct dmareg sstat; + struct dmareg dstat; + struct dmareg sstatar; + struct dmareg dstatar; + struct dmareg cfg; + struct dmareg sgr; + struct dmareg dsr; +}; + +struct dma_interrupt_regs { + struct dmareg tfr; + struct dmareg block; + struct dmareg srctran; + struct dmareg dsttran; + struct dmareg error; +}; + +struct ahb_dma_regs { + struct dma_chan_regs chan_regs[DMA_NUM_CHAN_REGS]; + struct dma_interrupt_regs interrupt_raw; + struct dma_interrupt_regs interrupt_status; + struct dma_interrupt_regs interrupt_mask; + struct dma_interrupt_regs interrupt_clear; + struct dmareg statusInt; + struct dmareg rq_srcreg; + struct dmareg rq_dstreg; + struct dmareg rq_sgl_srcreg; + struct dmareg rq_sgl_dstreg; + struct dmareg rq_lst_srcreg; + struct dmareg rq_lst_dstreg; + struct dmareg dma_cfg; + struct dmareg dma_chan_en; + struct dmareg dma_id; + struct dmareg dma_test; + struct dmareg res1; + struct dmareg res2; + /* DMA Comp Params + * Param 6 = dma_param[0], Param 5 = dma_param[1], + * Param 4 = dma_param[2] ... + */ + struct dmareg dma_params[6]; +}; + +#define DMA_EN 0x00000001 +#define DMA_DI 0x00000000 +#define DMA_CHANNEL(ch) (0x00000001 << (ch)) +#define DMA_ENABLE_CHAN(ch) ((0x00000001 << (ch)) | \ + ((0x000000001 << (ch)) << 8)) +#define DMA_DISABLE_CHAN(ch) (0x00000000 | \ + ((0x000000001 << (ch)) << 8)) + +#define SATA_DWC_MAX_PORTS 1 +#define SATA_DWC_SCR_OFFSET 0x24 +#define SATA_DWC_REG_OFFSET 0x64 + +struct sata_dwc_regs { + u32 fptagr; + u32 fpbor; + u32 fptcr; + u32 dmacr; + u32 dbtsr; + u32 intpr; + u32 intmr; + u32 errmr; + u32 llcr; + u32 phycr; + u32 physr; + u32 rxbistpd; + u32 rxbistpd1; + u32 rxbistpd2; + u32 txbistpd; + u32 txbistpd1; + u32 txbistpd2; + u32 bistcr; + u32 bistfctr; + u32 bistsr; + u32 bistdecr; + u32 res[15]; + u32 testr; + u32 versionr; + u32 idr; + u32 unimpl[192]; + u32 dmadr[256]; +}; + +#define SATA_DWC_TXFIFO_DEPTH 0x01FF +#define SATA_DWC_RXFIFO_DEPTH 0x01FF + +#define SATA_DWC_DBTSR_MWR(size) ((size / 4) & SATA_DWC_TXFIFO_DEPTH) +#define SATA_DWC_DBTSR_MRD(size) (((size / 4) & \ + SATA_DWC_RXFIFO_DEPTH) << 16) +#define SATA_DWC_INTPR_DMAT 0x00000001 +#define SATA_DWC_INTPR_NEWFP 0x00000002 +#define SATA_DWC_INTPR_PMABRT 0x00000004 +#define SATA_DWC_INTPR_ERR 0x00000008 +#define SATA_DWC_INTPR_NEWBIST 0x00000010 +#define SATA_DWC_INTPR_IPF 0x10000000 +#define SATA_DWC_INTMR_DMATM 0x00000001 +#define SATA_DWC_INTMR_NEWFPM 0x00000002 +#define SATA_DWC_INTMR_PMABRTM 0x00000004 +#define SATA_DWC_INTMR_ERRM 0x00000008 +#define SATA_DWC_INTMR_NEWBISTM 0x00000010 + +#define SATA_DWC_DMACR_TMOD_TXCHEN 0x00000004 +#define SATA_DWC_DMACR_TXRXCH_CLEAR SATA_DWC_DMACR_TMOD_TXCHEN + +#define SATA_DWC_QCMD_MAX 32 + +#define SATA_DWC_SERROR_ERR_BITS 0x0FFF0F03 + +#define HSDEVP_FROM_AP(ap) (struct sata_dwc_device_port*) \ + (ap)->private_data + +struct sata_dwc_device { + struct device *dev; + struct ata_probe_ent *pe; + struct ata_host *host; + u8 *reg_base; + struct sata_dwc_regs *sata_dwc_regs; + int irq_dma; +}; + +struct sata_dwc_device_port { + struct sata_dwc_device *hsdev; + int cmd_issued[SATA_DWC_QCMD_MAX]; + u32 dma_chan[SATA_DWC_QCMD_MAX]; + int dma_pending[SATA_DWC_QCMD_MAX]; +}; + +enum { + SATA_DWC_CMD_ISSUED_NOT = 0, + SATA_DWC_CMD_ISSUED_PEND = 1, + SATA_DWC_CMD_ISSUED_EXEC = 2, + SATA_DWC_CMD_ISSUED_NODATA = 3, + + SATA_DWC_DMA_PENDING_NONE = 0, + SATA_DWC_DMA_PENDING_TX = 1, + SATA_DWC_DMA_PENDING_RX = 2, +}; + +#define msleep(a) udelay(a * 1000) +#define ssleep(a) msleep(a * 1000) + +static int ata_probe_timeout = (ATA_TMOUT_INTERNAL / 100); + +enum sata_dev_state { + SATA_INIT = 0, + SATA_READY = 1, + SATA_NODEVICE = 2, + SATA_ERROR = 3, +}; +enum sata_dev_state dev_state = SATA_INIT; + +static struct ahb_dma_regs *sata_dma_regs = 0; +static struct ata_host *phost; +static struct ata_port ap; +static struct ata_port *pap = ≈ +static struct ata_device ata_device; +static struct sata_dwc_device_port dwc_devp; + +static void *scr_addr_sstatus; +static u32 temp_n_block = 0; + +static unsigned ata_exec_internal(struct ata_device *dev, + struct ata_taskfile *tf, const u8 *cdb, + int dma_dir, unsigned int buflen, + unsigned long timeout); +static unsigned int ata_dev_set_feature(struct ata_device *dev, + u8 enable,u8 feature); +static unsigned int ata_dev_init_params(struct ata_device *dev, + u16 heads, u16 sectors); +static u8 ata_irq_on(struct ata_port *ap); +static struct ata_queued_cmd *__ata_qc_from_tag(struct ata_port *ap, + unsigned int tag); +static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, + u8 status, int in_wq); +static void ata_tf_to_host(struct ata_port *ap, + const struct ata_taskfile *tf); +static void ata_exec_command(struct ata_port *ap, + const struct ata_taskfile *tf); +static unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc); +static u8 ata_check_altstatus(struct ata_port *ap); +static u8 ata_check_status(struct ata_port *ap); +static void ata_dev_select(struct ata_port *ap, unsigned int device, + unsigned int wait, unsigned int can_sleep); +static void ata_qc_issue(struct ata_queued_cmd *qc); +static void ata_tf_load(struct ata_port *ap, + const struct ata_taskfile *tf); +static int ata_dev_read_sectors(unsigned char* pdata, + unsigned long datalen, u32 block, u32 n_block); +static int ata_dev_write_sectors(unsigned char* pdata, + unsigned long datalen , u32 block, u32 n_block); +static void ata_std_dev_select(struct ata_port *ap, unsigned int device); +static void ata_qc_complete(struct ata_queued_cmd *qc); +static void __ata_qc_complete(struct ata_queued_cmd *qc); +static void fill_result_tf(struct ata_queued_cmd *qc); +static void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf); +static void ata_mmio_data_xfer(struct ata_device *dev, + unsigned char *buf, + unsigned int buflen,int do_write); +static void ata_pio_task(struct ata_port *arg_ap); +static void __ata_port_freeze(struct ata_port *ap); +static int ata_port_freeze(struct ata_port *ap); +static void ata_qc_free(struct ata_queued_cmd *qc); +static void ata_pio_sectors(struct ata_queued_cmd *qc); +static void ata_pio_sector(struct ata_queued_cmd *qc); +static void ata_pio_queue_task(struct ata_port *ap, + void *data,unsigned long delay); +static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq); +static int sata_dwc_softreset(struct ata_port *ap); +static int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, + unsigned int flags, u16 *id); +static int check_sata_dev_state(void); + +static const struct ata_port_info sata_dwc_port_info[] = { + { + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING | + ATA_FLAG_SRST | ATA_FLAG_NCQ, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, + }, +}; + +int init_sata(int dev) +{ + struct sata_dwc_device hsdev; + struct ata_host host; + struct ata_port_info pi = sata_dwc_port_info[0]; + struct ata_link *link; + struct sata_dwc_device_port hsdevp = dwc_devp; + u8 *base = 0; + u8 *sata_dma_regs_addr = 0; + u8 status; + unsigned long base_addr = 0; + int chan = 0; + int rc; + int i; + + phost = &host; + + base = (u8*)SATA_BASE_ADDR; + + hsdev.sata_dwc_regs = (void *__iomem)(base + SATA_DWC_REG_OFFSET); + + host.n_ports = SATA_DWC_MAX_PORTS; + + for (i = 0; i < SATA_DWC_MAX_PORTS; i++) { + ap.pflags |= ATA_PFLAG_INITIALIZING; + ap.flags = ATA_FLAG_DISABLED; + ap.print_id = -1; + ap.ctl = ATA_DEVCTL_OBS; + ap.host = &host; + ap.last_ctl = 0xFF; + + link = &ap.link; + link->ap = ≈ + link->pmp = 0; + link->active_tag = ATA_TAG_POISON; + link->hw_sata_spd_limit = 0; + + ap.port_no = i; + host.ports[i] = ≈ + } + + ap.pio_mask = pi.pio_mask; + ap.mwdma_mask = pi.mwdma_mask; + ap.udma_mask = pi.udma_mask; + ap.flags |= pi.flags; + ap.link.flags |= pi.link_flags; + + host.ports[0]->ioaddr.cmd_addr = base; + host.ports[0]->ioaddr.scr_addr = base + SATA_DWC_SCR_OFFSET; + scr_addr_sstatus = base + SATA_DWC_SCR_OFFSET; + + base_addr = (unsigned long)base; + + host.ports[0]->ioaddr.cmd_addr = (void *)base_addr + 0x00; + host.ports[0]->ioaddr.data_addr = (void *)base_addr + 0x00; + + host.ports[0]->ioaddr.error_addr = (void *)base_addr + 0x04; + host.ports[0]->ioaddr.feature_addr = (void *)base_addr + 0x04; + + host.ports[0]->ioaddr.nsect_addr = (void *)base_addr + 0x08; + + host.ports[0]->ioaddr.lbal_addr = (void *)base_addr + 0x0c; + host.ports[0]->ioaddr.lbam_addr = (void *)base_addr + 0x10; + host.ports[0]->ioaddr.lbah_addr = (void *)base_addr + 0x14; + + host.ports[0]->ioaddr.device_addr = (void *)base_addr + 0x18; + host.ports[0]->ioaddr.command_addr = (void *)base_addr + 0x1c; + host.ports[0]->ioaddr.status_addr = (void *)base_addr + 0x1c; + + host.ports[0]->ioaddr.altstatus_addr = (void *)base_addr + 0x20; + host.ports[0]->ioaddr.ctl_addr = (void *)base_addr + 0x20; + + sata_dma_regs_addr = (u8*)SATA_DMA_REG_ADDR; + sata_dma_regs = (void *__iomem)sata_dma_regs_addr; + + status = ata_check_altstatus(&ap); + + if (status == 0x7f) { + printf("Hard Disk not found.\n"); + dev_state = SATA_NODEVICE; + rc = false; + return rc; + } + + printf("Waiting for device..."); + i = 0; + while (1) { + udelay(10000); + + status = ata_check_altstatus(&ap); + + if ((status & ATA_BUSY) == 0) { + printf("\n"); + break; + } + + i++; + if (i > (ATA_RESET_TIME * 100)) { + printf("** TimeOUT **\n"); + + dev_state = SATA_NODEVICE; + rc = false; + return rc; + } + if ((i >= 100) && ((i % 100) == 0)) + printf("."); + } + + rc = sata_dwc_softreset(&ap); + + if (rc) { + printf("sata_dwc : error. soft reset failed\n"); + return rc; + } + + for (chan = 0; chan < DMA_NUM_CHANS; chan++) { + out_le32(&(sata_dma_regs->interrupt_mask.error.low), + DMA_DISABLE_CHAN(chan)); + + out_le32(&(sata_dma_regs->interrupt_mask.tfr.low), + DMA_DISABLE_CHAN(chan)); + } + + out_le32(&(sata_dma_regs->dma_cfg.low), DMA_DI); + + out_le32(&hsdev.sata_dwc_regs->intmr, + SATA_DWC_INTMR_ERRM | + SATA_DWC_INTMR_PMABRTM); + + /* Unmask the error bits that should trigger + * an error interrupt by setting the error mask register. + */ + out_le32(&hsdev.sata_dwc_regs->errmr, SATA_DWC_SERROR_ERR_BITS); + + hsdev.host = ap.host; + memset(&hsdevp, 0, sizeof(hsdevp)); + hsdevp.hsdev = &hsdev; + + for (i = 0; i < SATA_DWC_QCMD_MAX; i++) + hsdevp.cmd_issued[i] = SATA_DWC_CMD_ISSUED_NOT; + + out_le32((void __iomem *)scr_addr_sstatus + 4, + in_le32((void __iomem *)scr_addr_sstatus + 4)); + + rc = 0; + return rc; +} + +int reset_sata(int dev) +{ + return 0; +} + +static u8 ata_check_altstatus(struct ata_port *ap) +{ + u8 val = 0; + val = readb(ap->ioaddr.altstatus_addr); + return val; +} + +static int sata_dwc_softreset(struct ata_port *ap) +{ + u8 nsect,lbal = 0; + u8 tmp = 0; + struct ata_ioports *ioaddr = &ap->ioaddr; + + in_le32((void *)ap->ioaddr.scr_addr + (SCR_ERROR * 4)); + + writeb(0x55, ioaddr->nsect_addr); + writeb(0xaa, ioaddr->lbal_addr); + writeb(0xaa, ioaddr->nsect_addr); + writeb(0x55, ioaddr->lbal_addr); + writeb(0x55, ioaddr->nsect_addr); + writeb(0xaa, ioaddr->lbal_addr); + + nsect = readb(ioaddr->nsect_addr); + lbal = readb(ioaddr->lbal_addr); + + if ((nsect == 0x55) && (lbal == 0xaa)) { + printf("Device found\n"); + } else { + printf("No device found\n"); + dev_state = SATA_NODEVICE; + return false; + } + + tmp = ATA_DEVICE_OBS; + writeb(tmp, ioaddr->device_addr); + writeb(ap->ctl, ioaddr->ctl_addr); + + udelay(200); + + writeb(ap->ctl | ATA_SRST, ioaddr->ctl_addr); + + udelay(200); + writeb(ap->ctl, ioaddr->ctl_addr); + + msleep(150); + ata_check_status(ap); + + msleep(50); + ata_check_status(ap); + + while (1) { + u8 status = ata_check_status(ap); + + if (!(status & ATA_BUSY)) + break; + + printf("Hard Disk status is BUSY.\n"); + msleep(50); + } + + tmp = ATA_DEVICE_OBS; + writeb(tmp, ioaddr->device_addr); + + nsect = readb(ioaddr->nsect_addr); + lbal = readb(ioaddr->lbal_addr); + + return 0; +} + +static u8 ata_check_status(struct ata_port *ap) +{ + u8 val = 0; + val = readb(ap->ioaddr.status_addr); + return val; +} + +static int ata_id_has_hipm(const u16 *id) +{ + u16 val = id[76]; + + if (val == 0 || val == 0xffff) + return -1; + + return val & (1 << 9); +} + +static int ata_id_has_dipm(const u16 *id) +{ + u16 val = id[78]; + + if (val == 0 || val == 0xffff) + return -1; + + return val & (1 << 3); +} + +int scan_sata(int dev) +{ + int i; + int rc; + u8 status; + const u16 *id; + struct ata_device *ata_dev = &ata_device; + unsigned long pio_mask, mwdma_mask; + char revbuf[7]; + u16 iobuf[ATA_SECTOR_WORDS]; + + memset(iobuf, 0, sizeof(iobuf)); + + if (dev_state == SATA_NODEVICE) + return 1; + + printf("Waiting for device..."); + i = 0; + while (1) { + udelay(10000); + + status = ata_check_altstatus(&ap); + + if ((status & ATA_BUSY) == 0) { + printf("\n"); + break; + } + + i++; + if (i > (ATA_RESET_TIME * 100)) { + printf("** TimeOUT **\n"); + + dev_state = SATA_NODEVICE; + return 1; + } + if ((i >= 100) && ((i % 100) == 0)) + printf("."); + } + + udelay(1000); + + rc = ata_dev_read_id(ata_dev, &ata_dev->class, + ATA_READID_POSTRESET,ata_dev->id); + if (rc) { + printf("sata_dwc : error. failed sata scan\n"); + return 1; + } + + /* SATA drives indicate we have a bridge. We don't know which + * end of the link the bridge is which is a problem + */ + if (ata_id_is_sata(ata_dev->id)) + ap.cbl = ATA_CBL_SATA; + + id = ata_dev->id; + + ata_dev->flags &= ~ATA_DFLAG_CFG_MASK; + ata_dev->max_sectors = 0; + ata_dev->cdb_len = 0; + ata_dev->n_sectors = 0; + ata_dev->cylinders = 0; + ata_dev->heads = 0; + ata_dev->sectors = 0; + + if (id[ATA_ID_FIELD_VALID] & (1 << 1)) { + pio_mask = id[ATA_ID_PIO_MODES] & 0x03; + pio_mask <<= 3; + pio_mask |= 0x7; + } else { + /* If word 64 isn't valid then Word 51 high byte holds + * the PIO timing number for the maximum. Turn it into + * a mask. + */ + u8 mode = (id[ATA_ID_OLD_PIO_MODES] >> 8) & 0xFF; + if (mode < 5) { + pio_mask = (2 << mode) - 1; + } else { + pio_mask = 1; + } + } + + mwdma_mask = id[ATA_ID_MWDMA_MODES] & 0x07; + + if (ata_id_is_cfa(id)) { + int pio = id[163] & 0x7; + int dma = (id[163] >> 3) & 7; + + if (pio) + pio_mask |= (1 << 5); + if (pio > 1) + pio_mask |= (1 << 6); + if (dma) + mwdma_mask |= (1 << 3); + if (dma > 1) + mwdma_mask |= (1 << 4); + } + + if (ata_dev->class == ATA_DEV_ATA) { + if (ata_id_is_cfa(id)) { + if (id[162] & 1) + printf("supports DRM functions and may " + "not be fully accessable.\n"); + strcpy(revbuf, "CFA"); + } else { + if (ata_id_has_tpm(id)) + printf("supports DRM functions and may " + "not be fully accessable.\n"); + } + + ata_dev->n_sectors = ata_id_n_sectors((u16*)id); + + if (ata_dev->id[59] & 0x100) + ata_dev->multi_count = ata_dev->id[59] & 0xff; + + if (ata_id_has_lba(id)) { + char ncq_desc[20]; + + ata_dev->flags |= ATA_DFLAG_LBA; + if (ata_id_has_lba48(id)) { + ata_dev->flags |= ATA_DFLAG_LBA48; + + if (ata_dev->n_sectors >= (1UL << 28) && + ata_id_has_flush_ext(id)) + ata_dev->flags |= ATA_DFLAG_FLUSH_EXT; + } + if (!ata_id_has_ncq(ata_dev->id)) + ncq_desc[0] = '\0'; + + if (ata_dev->horkage & ATA_HORKAGE_NONCQ) + strcpy(ncq_desc, "NCQ (not used)"); + + if (ap.flags & ATA_FLAG_NCQ) + ata_dev->flags |= ATA_DFLAG_NCQ; + } + ata_dev->cdb_len = 16; + } + ata_dev->max_sectors = ATA_MAX_SECTORS; + if (ata_dev->flags & ATA_DFLAG_LBA48) + ata_dev->max_sectors = ATA_MAX_SECTORS_LBA48; + + if (!(ata_dev->horkage & ATA_HORKAGE_IPM)) { + if (ata_id_has_hipm(ata_dev->id)) + ata_dev->flags |= ATA_DFLAG_HIPM; + if (ata_id_has_dipm(ata_dev->id)) + ata_dev->flags |= ATA_DFLAG_DIPM; + } + + if ((ap.cbl == ATA_CBL_SATA) && (!ata_id_is_sata(ata_dev->id))) { + ata_dev->udma_mask &= ATA_UDMA5; + ata_dev->max_sectors = ATA_MAX_SECTORS; + } + + if (ata_dev->horkage & ATA_HORKAGE_DIAGNOSTIC) { + printf("Drive reports diagnostics failure." + "This may indicate a drive\n"); + printf("fault or invalid emulation." + "Contact drive vendor for information.\n"); + } + + rc = check_sata_dev_state(); + + ata_id_c_string(ata_dev->id, + (unsigned char *)sata_dev_desc[dev].revision, + ATA_ID_FW_REV, sizeof(sata_dev_desc[dev].revision)); + ata_id_c_string(ata_dev->id, + (unsigned char *)sata_dev_desc[dev].vendor, + ATA_ID_PROD, sizeof(sata_dev_desc[dev].vendor)); + ata_id_c_string(ata_dev->id, + (unsigned char *)sata_dev_desc[dev].product, + ATA_ID_SERNO, sizeof(sata_dev_desc[dev].product)); + + sata_dev_desc[dev].lba = (u32) ata_dev->n_sectors; + +#ifdef CONFIG_LBA48 + if (ata_dev->id[83] & (1 << 10)) { + sata_dev_desc[dev].lba48 = 1; + } else { + sata_dev_desc[dev].lba48 = 0; + } +#endif + + return 0; +} + +static u8 ata_busy_wait(struct ata_port *ap, + unsigned int bits,unsigned int max) +{ + u8 status; + + do { + udelay(10); + status = ata_check_status(ap); + max--; + } while (status != 0xff && (status & bits) && (max > 0)); + + return status; +} + +static int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, + unsigned int flags, u16 *id) +{ + struct ata_port *ap = pap; + unsigned int class = *p_class; + struct ata_taskfile tf; + unsigned int err_mask = 0; + const char *reason; + int may_fallback = 1, tried_spinup = 0; + u8 status; + int rc; + + status = ata_busy_wait(ap, ATA_BUSY, 30000); + if (status & ATA_BUSY) { + printf("BSY = 0 check. timeout.\n"); + rc = false; + return rc; + } + + ata_dev_select(ap, dev->devno, 1, 1); + +retry: + memset(&tf, 0, sizeof(tf)); + ap->print_id = 1; + ap->flags &= ~ATA_FLAG_DISABLED; + tf.ctl = ap->ctl; + tf.device = ATA_DEVICE_OBS; + tf.command = ATA_CMD_ID_ATA; + tf.protocol = ATA_PROT_PIO; + + /* Some devices choke if TF registers contain garbage. Make + * sure those are properly initialized. + */ + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + + /* Device presence detection is unreliable on some + * controllers. Always poll IDENTIFY if available. + */ + tf.flags |= ATA_TFLAG_POLLING; + + temp_n_block = 1; + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, + sizeof(id[0]) * ATA_ID_WORDS, 0); + + if (err_mask) { + if (err_mask & AC_ERR_NODEV_HINT) { + printf("NODEV after polling detection\n"); + return -ENOENT; + } + + if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) { + /* Device or controller might have reported + * the wrong device class. Give a shot at the + * other IDENTIFY if the current one is + * aborted by the device. + */ + if (may_fallback) { + may_fallback = 0; + + if (class == ATA_DEV_ATA) { + class = ATA_DEV_ATAPI; + } else { + class = ATA_DEV_ATA; + } + goto retry; + } + /* Control reaches here iff the device aborted + * both flavors of IDENTIFYs which happens + * sometimes with phantom devices. + */ + printf("both IDENTIFYs aborted, assuming NODEV\n"); + return -ENOENT; + } + rc = -EIO; + reason = "I/O error"; + goto err_out; + } + + /* Falling back doesn't make sense if ID data was read + * successfully at least once. + */ + may_fallback = 0; + + unsigned int id_cnt; + + for (id_cnt = 0; id_cnt < ATA_ID_WORDS; id_cnt++) + id[id_cnt] = le16_to_cpu(id[id_cnt]); + + + rc = -EINVAL; + reason = "device reports invalid type"; + + if (class == ATA_DEV_ATA) { + if (!ata_id_is_ata(id) && !ata_id_is_cfa(id)) + goto err_out; + } else { + if (ata_id_is_ata(id)) + goto err_out; + } + if (!tried_spinup && (id[2] == 0x37c8 || id[2] == 0x738c)) { + tried_spinup = 1; + /* + * Drive powered-up in standby mode, and requires a specific + * SET_FEATURES spin-up subcommand before it will accept + * anything other than the original IDENTIFY command. + */ + err_mask = ata_dev_set_feature(dev, SETFEATURES_SPINUP, 0); + if (err_mask && id[2] != 0x738c) { + rc = -EIO; + reason = "SPINUP failed"; + goto err_out; + } + /* + * If the drive initially returned incomplete IDENTIFY info, + * we now must reissue the IDENTIFY command. + */ + if (id[2] == 0x37c8) + goto retry; + } + + if ((flags & ATA_READID_POSTRESET) && class == ATA_DEV_ATA) { + /* + * The exact sequence expected by certain pre-ATA4 drives is: + * SRST RESET + * IDENTIFY (optional in early ATA) + * INITIALIZE DEVICE PARAMETERS (later IDE and ATA) + * anything else.. + * Some drives were very specific about that exact sequence. + * + * Note that ATA4 says lba is mandatory so the second check + * shoud never trigger. + */ + if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) { + err_mask = ata_dev_init_params(dev, id[3], id[6]); + if (err_mask) { + rc = -EIO; + reason = "INIT_DEV_PARAMS failed"; + goto err_out; + } + + /* current CHS translation info (id[53-58]) might be + * changed. reread the identify device info. + */ + flags &= ~ATA_READID_POSTRESET; + goto retry; + } + } + + *p_class = class; + return 0; + +err_out: + printf("failed to READ ID (%s, err_mask=0x%x)\n", reason, err_mask); + return rc; +} + +static u8 ata_wait_idle(struct ata_port *ap) +{ + u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); + return status; +} + +static void ata_dev_select(struct ata_port *ap, unsigned int device, + unsigned int wait, unsigned int can_sleep) +{ + if (wait) + ata_wait_idle(ap); + + ata_std_dev_select(ap, device); + + if (wait) + ata_wait_idle(ap); +} + +static void ata_std_dev_select(struct ata_port *ap, unsigned int device) +{ + u8 tmp; + + if (device == 0) { + tmp = ATA_DEVICE_OBS; + } else { + tmp = ATA_DEVICE_OBS | ATA_DEV1; + } + + writeb(tmp, ap->ioaddr.device_addr); + + readb(ap->ioaddr.altstatus_addr); + + udelay(1); +} + +static int waiting_for_reg_state(volatile u8 *offset, + int timeout_msec, + u32 sign) +{ + int i; + u32 status; + + for (i = 0; i < timeout_msec; i++) { + status = readl(offset); + if ((status & sign) != 0) + break; + msleep(1); + } + + return (i < timeout_msec) ? 0 : -1; +} + +static void ata_qc_reinit(struct ata_queued_cmd *qc) +{ + qc->dma_dir = DMA_NONE; + qc->flags = 0; + qc->nbytes = qc->extrabytes = qc->curbytes = 0; + qc->n_elem = 0; + qc->err_mask = 0; + qc->sect_size = ATA_SECT_SIZE; + qc->nbytes = ATA_SECT_SIZE * temp_n_block; + + memset(&qc->tf, 0, sizeof(qc->tf)); + qc->tf.ctl = 0; + qc->tf.device = ATA_DEVICE_OBS; + + qc->result_tf.command = ATA_DRDY; + qc->result_tf.feature = 0; +} + +struct ata_queued_cmd *__ata_qc_from_tag(struct ata_port *ap, + unsigned int tag) +{ + if (tag < ATA_MAX_QUEUE) + return &ap->qcmd[tag]; + return NULL; +} + +static void __ata_port_freeze(struct ata_port *ap) +{ + printf("set port freeze.\n"); + ap->pflags |= ATA_PFLAG_FROZEN; +} + +static int ata_port_freeze(struct ata_port *ap) +{ + __ata_port_freeze(ap); + return 0; +} + +unsigned ata_exec_internal(struct ata_device *dev, + struct ata_taskfile *tf, const u8 *cdb, + int dma_dir, unsigned int buflen, + unsigned long timeout) +{ + struct ata_link *link = dev->link; + struct ata_port *ap = pap; + struct ata_queued_cmd *qc; + unsigned int tag, preempted_tag; + u32 preempted_sactive, preempted_qc_active; + int preempted_nr_active_links; + unsigned int err_mask; + int rc = 0; + u8 status; + + status = ata_busy_wait(ap, ATA_BUSY, 300000); + if (status & ATA_BUSY) { + printf("BSY = 0 check. timeout.\n"); + rc = false; + return rc; + } + + if (ap->pflags & ATA_PFLAG_FROZEN) + return AC_ERR_SYSTEM; + + tag = ATA_TAG_INTERNAL; + + if (test_and_set_bit(tag, &ap->qc_allocated)) { + rc = false; + return rc; + } + + qc = __ata_qc_from_tag(ap, tag); + qc->tag = tag; + qc->ap = ap; + qc->dev = dev; + + ata_qc_reinit(qc); + + preempted_tag = link->active_tag; + preempted_sactive = link->sactive; + preempted_qc_active = ap->qc_active; + preempted_nr_active_links = ap->nr_active_links; + link->active_tag = ATA_TAG_POISON; + link->sactive = 0; + ap->qc_active = 0; + ap->nr_active_links = 0; + + qc->tf = *tf; + if (cdb) + memcpy(qc->cdb, cdb, ATAPI_CDB_LEN); + qc->flags |= ATA_QCFLAG_RESULT_TF; + qc->dma_dir = dma_dir; + qc->private_data = 0; + + ata_qc_issue(qc); + + if (!timeout) + timeout = ata_probe_timeout * 1000 / HZ; + + status = ata_busy_wait(ap, ATA_BUSY, 30000); + if (status & ATA_BUSY) { + printf("BSY = 0 check. timeout.\n"); + printf("altstatus = 0x%x.\n", status); + qc->err_mask |= AC_ERR_OTHER; + return qc->err_mask; + } + + if (waiting_for_reg_state(ap->ioaddr.altstatus_addr, 1000, 0x8)) { + u8 status = 0; + u8 errorStatus = 0; + + status = readb(ap->ioaddr.altstatus_addr); + if ((status & 0x01) != 0) { + errorStatus = readb(ap->ioaddr.feature_addr); + if (errorStatus == 0x04 && + qc->tf.command == ATA_CMD_PIO_READ_EXT){ + printf("Hard Disk doesn't support LBA48\n"); + dev_state = SATA_ERROR; + qc->err_mask |= AC_ERR_OTHER; + return qc->err_mask; + } + } + qc->err_mask |= AC_ERR_OTHER; + return qc->err_mask; + } + + status = ata_busy_wait(ap, ATA_BUSY, 10); + if (status & ATA_BUSY) { + printf("BSY = 0 check. timeout.\n"); + qc->err_mask |= AC_ERR_OTHER; + return qc->err_mask; + } + + ata_pio_task(ap); + + if (!rc) { + if (qc->flags & ATA_QCFLAG_ACTIVE) { + qc->err_mask |= AC_ERR_TIMEOUT; + ata_port_freeze(ap); + } + } + + if (qc->flags & ATA_QCFLAG_FAILED) { + if (qc->result_tf.command & (ATA_ERR | ATA_DF)) + qc->err_mask |= AC_ERR_DEV; + + if (!qc->err_mask) + qc->err_mask |= AC_ERR_OTHER; + + if (qc->err_mask & ~AC_ERR_OTHER) + qc->err_mask &= ~AC_ERR_OTHER; + } + + *tf = qc->result_tf; + err_mask = qc->err_mask; + ata_qc_free(qc); + link->active_tag = preempted_tag; + link->sactive = preempted_sactive; + ap->qc_active = preempted_qc_active; + ap->nr_active_links = preempted_nr_active_links; + + if (ap->flags & ATA_FLAG_DISABLED) { + err_mask |= AC_ERR_SYSTEM; + ap->flags &= ~ATA_FLAG_DISABLED; + } + + return err_mask; +} + +static void ata_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_link *link = qc->dev->link; + u8 prot = qc->tf.protocol; + + if (ata_is_ncq(prot)) { + if (!link->sactive) + ap->nr_active_links++; + link->sactive |= 1 << qc->tag; + } else { + ap->nr_active_links++; + link->active_tag = qc->tag; + } + + qc->flags |= ATA_QCFLAG_ACTIVE; + ap->qc_active |= 1 << qc->tag; + + if (qc->dev->flags & ATA_DFLAG_SLEEPING) { + msleep(1); + return; + } + + qc->err_mask |= ata_qc_issue_prot(qc); + if (qc->err_mask) + goto err; + + return; +err: + ata_qc_complete(qc); +} + +static unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + if (ap->flags & ATA_FLAG_PIO_POLLING) { + switch (qc->tf.protocol) { + case ATA_PROT_PIO: + case ATA_PROT_NODATA: + case ATAPI_PROT_PIO: + case ATAPI_PROT_NODATA: + qc->tf.flags |= ATA_TFLAG_POLLING; + break; + default: + break; + } + } + + ata_dev_select(ap, qc->dev->devno, 1, 0); + + switch (qc->tf.protocol) { + case ATA_PROT_PIO: + if (qc->tf.flags & ATA_TFLAG_POLLING) + qc->tf.ctl |= ATA_NIEN; + + ata_tf_to_host(ap, &qc->tf); + + ap->hsm_task_state = HSM_ST; + + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_pio_queue_task(ap, qc, 0); + + break; + + default: + return AC_ERR_SYSTEM; + } + + return 0; +} + +static void ata_tf_to_host(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + ata_tf_load(ap, tf); + ata_exec_command(ap, tf); +} + +static void ata_tf_load(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + if (tf->ctl != ap->last_ctl) { + if (ioaddr->ctl_addr) + writeb(tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + } + + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + writeb(tf->hob_feature, ioaddr->feature_addr); + writeb(tf->hob_nsect, ioaddr->nsect_addr); + writeb(tf->hob_lbal, ioaddr->lbal_addr); + writeb(tf->hob_lbam, ioaddr->lbam_addr); + writeb(tf->hob_lbah, ioaddr->lbah_addr); + } + + if (is_addr) { + writeb(tf->feature, ioaddr->feature_addr); + writeb(tf->nsect, ioaddr->nsect_addr); + writeb(tf->lbal, ioaddr->lbal_addr); + writeb(tf->lbam, ioaddr->lbam_addr); + writeb(tf->lbah, ioaddr->lbah_addr); + } + + if (tf->flags & ATA_TFLAG_DEVICE) + writeb(tf->device, ioaddr->device_addr); + + ata_wait_idle(ap); +} + +static void ata_exec_command(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + writeb(tf->command, ap->ioaddr.command_addr); + + readb(ap->ioaddr.altstatus_addr); + + udelay(1); +} + +static void ata_pio_queue_task(struct ata_port *ap, + void *data,unsigned long delay) +{ + ap->port_task_data = data; +} + +static unsigned int ac_err_mask(u8 status) +{ + if (status & (ATA_BUSY | ATA_DRQ)) + return AC_ERR_HSM; + if (status & (ATA_ERR | ATA_DF)) + return AC_ERR_DEV; + return 0; +} + +static unsigned int __ac_err_mask(u8 status) +{ + unsigned int mask = ac_err_mask(status); + if (mask == 0) + return AC_ERR_OTHER; + return mask; +} + +static void ata_pio_task(struct ata_port *arg_ap) +{ + struct ata_port *ap = arg_ap; + struct ata_queued_cmd *qc = ap->port_task_data; + u8 status; + int poll_next; + +fsm_start: + /* + * This is purely heuristic. This is a fast path. + * Sometimes when we enter, BSY will be cleared in + * a chk-status or two. If not, the drive is probably seeking + * or something. Snooze for a couple msecs, then + * chk-status again. If still busy, queue delayed work. + */ + status = ata_busy_wait(ap, ATA_BUSY, 5); + if (status & ATA_BUSY) { + msleep(2); + status = ata_busy_wait(ap, ATA_BUSY, 10); + if (status & ATA_BUSY) { + ata_pio_queue_task(ap, qc, ATA_SHORT_PAUSE); + return; + } + } + + poll_next = ata_hsm_move(ap, qc, status, 1); + + /* another command or interrupt handler + * may be running at this point. + */ + if (poll_next) + goto fsm_start; +} + +static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, + u8 status, int in_wq) +{ + int poll_next; + +fsm_start: + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + poll_next = (qc->tf.flags & ATA_TFLAG_POLLING); + + if ((status & ATA_DRQ) == 0) { + if (status & (ATA_ERR | ATA_DF)) { + qc->err_mask |= AC_ERR_DEV; + } else { + qc->err_mask |= AC_ERR_HSM; + } + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + /* Device should not ask for data transfer (DRQ=1) + * when it finds something wrong. + * We ignore DRQ here and stop the HSM by + * changing hsm_task_state to HSM_ST_ERR and + * let the EH abort the command or reset the device. + */ + if (status & (ATA_ERR | ATA_DF)) { + if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) { + printf("DRQ=1 with device error, " + "dev_stat 0x%X\n", status); + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + } + + if (qc->tf.protocol == ATA_PROT_PIO) { + /* PIO data out protocol. + * send first data block. + */ + /* ata_pio_sectors() might change the state + * to HSM_ST_LAST. so, the state is changed here + * before ata_pio_sectors(). + */ + ap->hsm_task_state = HSM_ST; + ata_pio_sectors(qc); + } else { + printf("protocol is not ATA_PROT_PIO \n"); + } + break; + + case HSM_ST: + if ((status & ATA_DRQ) == 0) { + if (status & (ATA_ERR | ATA_DF)) { + qc->err_mask |= AC_ERR_DEV; + } else { + /* HSM violation. Let EH handle this. + * Phantom devices also trigger this + * condition. Mark hint. + */ + qc->err_mask |= AC_ERR_HSM | AC_ERR_NODEV_HINT; + } + + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + /* For PIO reads, some devices may ask for + * data transfer (DRQ=1) alone with ERR=1. + * We respect DRQ here and transfer one + * block of junk data before changing the + * hsm_task_state to HSM_ST_ERR. + * + * For PIO writes, ERR=1 DRQ=1 doesn't make + * sense since the data block has been + * transferred to the device. + */ + if (status & (ATA_ERR | ATA_DF)) { + qc->err_mask |= AC_ERR_DEV; + + if (!(qc->tf.flags & ATA_TFLAG_WRITE)) { + ata_pio_sectors(qc); + status = ata_wait_idle(ap); + } + + if (status & (ATA_BUSY | ATA_DRQ)) + qc->err_mask |= AC_ERR_HSM; + + /* ata_pio_sectors() might change the + * state to HSM_ST_LAST. so, the state + * is changed after ata_pio_sectors(). + */ + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + ata_pio_sectors(qc); + if (ap->hsm_task_state == HSM_ST_LAST && + (!(qc->tf.flags & ATA_TFLAG_WRITE))) { + status = ata_wait_idle(ap); + goto fsm_start; + } + + poll_next = 1; + break; + + case HSM_ST_LAST: + if (!ata_ok(status)) { + qc->err_mask |= __ac_err_mask(status); + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + ap->hsm_task_state = HSM_ST_IDLE; + + ata_hsm_qc_complete(qc, in_wq); + + poll_next = 0; + break; + + case HSM_ST_ERR: + /* make sure qc->err_mask is available to + * know what's wrong and recover + */ + ap->hsm_task_state = HSM_ST_IDLE; + + ata_hsm_qc_complete(qc, in_wq); + + poll_next = 0; + break; + default: + poll_next = 0; + } + + return poll_next; +} + +static void ata_pio_sectors(struct ata_queued_cmd *qc) +{ + struct ata_port *ap; + ap = pap; + qc->pdata = ap->pdata; + + ata_pio_sector(qc); + + readb(qc->ap->ioaddr.altstatus_addr); + udelay(1); +} + +static void ata_pio_sector(struct ata_queued_cmd *qc) +{ + int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); + struct ata_port *ap = qc->ap; + unsigned int offset; + unsigned char *buf; + char temp_data_buf[512]; + + if (qc->curbytes == qc->nbytes - qc->sect_size) + ap->hsm_task_state = HSM_ST_LAST; + + offset = qc->curbytes; + + switch (qc->tf.command) { + case ATA_CMD_ID_ATA: + buf = (unsigned char *)&ata_device.id[0]; + break; + case ATA_CMD_PIO_READ_EXT: + case ATA_CMD_PIO_READ: + case ATA_CMD_PIO_WRITE_EXT: + case ATA_CMD_PIO_WRITE: + buf = qc->pdata + offset; + break; + default: + buf = (unsigned char *)&temp_data_buf[0]; + } + + ata_mmio_data_xfer(qc->dev, buf, qc->sect_size, do_write); + + qc->curbytes += qc->sect_size; + +} + +static void ata_mmio_data_xfer(struct ata_device *dev, unsigned char *buf, + unsigned int buflen, int do_write) +{ + struct ata_port *ap = pap; + void __iomem *data_addr = ap->ioaddr.data_addr; + unsigned int words = buflen >> 1; + u16 *buf16 = (u16 *)buf; + unsigned int i = 0; + + udelay(100); + if (do_write) { + for (i = 0; i < words; i++) + writew(le16_to_cpu(buf16[i]), data_addr); + } else { + for (i = 0; i < words; i++) + buf16[i] = cpu_to_le16(readw(data_addr)); + } + + if (buflen & 0x01) { + __le16 align_buf[1] = { 0 }; + unsigned char *trailing_buf = buf + buflen - 1; + + if (do_write) { + memcpy(align_buf, trailing_buf, 1); + writew(le16_to_cpu(align_buf[0]), data_addr); + } else { + align_buf[0] = cpu_to_le16(readw(data_addr)); + memcpy(trailing_buf, align_buf, 1); + } + } +} + +static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) +{ + struct ata_port *ap = qc->ap; + + if (in_wq) { + /* EH might have kicked in while host lock is + * released. + */ + qc = &ap->qcmd[qc->tag]; + if (qc) { + if (!(qc->err_mask & AC_ERR_HSM)) { + ata_irq_on(ap); + ata_qc_complete(qc); + } else { + ata_port_freeze(ap); + } + } + } else { + if (!(qc->err_mask & AC_ERR_HSM)) { + ata_qc_complete(qc); + } else { + ata_port_freeze(ap); + } + } +} + +static u8 ata_irq_on(struct ata_port *ap) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + u8 tmp; + + ap->ctl &= ~ATA_NIEN; + ap->last_ctl = ap->ctl; + + if (ioaddr->ctl_addr) + writeb(ap->ctl, ioaddr->ctl_addr); + + tmp = ata_wait_idle(ap); + + return tmp; +} + +static unsigned int ata_tag_internal(unsigned int tag) +{ + return tag == ATA_MAX_QUEUE - 1; +} + +static void ata_qc_complete(struct ata_queued_cmd *qc) +{ + struct ata_device *dev = qc->dev; + if (qc->err_mask) + qc->flags |= ATA_QCFLAG_FAILED; + + if (qc->flags & ATA_QCFLAG_FAILED) { + if (!ata_tag_internal(qc->tag)) { + fill_result_tf(qc); + return; + } + } + if (qc->flags & ATA_QCFLAG_RESULT_TF) + fill_result_tf(qc); + + /* Some commands need post-processing after successful + * completion. + */ + switch (qc->tf.command) { + case ATA_CMD_SET_FEATURES: + if (qc->tf.feature != SETFEATURES_WC_ON && + qc->tf.feature != SETFEATURES_WC_OFF) + break; + case ATA_CMD_INIT_DEV_PARAMS: + case ATA_CMD_SET_MULTI: + break; + + case ATA_CMD_SLEEP: + dev->flags |= ATA_DFLAG_SLEEPING; + break; + } + + __ata_qc_complete(qc); +} + +static void fill_result_tf(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + qc->result_tf.flags = qc->tf.flags; + ata_tf_read(ap, &qc->result_tf); +} + +static void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + tf->command = ata_check_status(ap); + tf->feature = readb(ioaddr->error_addr); + tf->nsect = readb(ioaddr->nsect_addr); + tf->lbal = readb(ioaddr->lbal_addr); + tf->lbam = readb(ioaddr->lbam_addr); + tf->lbah = readb(ioaddr->lbah_addr); + tf->device = readb(ioaddr->device_addr); + + if (tf->flags & ATA_TFLAG_LBA48) { + if (ioaddr->ctl_addr) { + writeb(tf->ctl | ATA_HOB, ioaddr->ctl_addr); + + tf->hob_feature = readb(ioaddr->error_addr); + tf->hob_nsect = readb(ioaddr->nsect_addr); + tf->hob_lbal = readb(ioaddr->lbal_addr); + tf->hob_lbam = readb(ioaddr->lbam_addr); + tf->hob_lbah = readb(ioaddr->lbah_addr); + + writeb(tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + } else { + printf("sata_dwc warnning register read.\n"); + } + } +} + +static void __ata_qc_complete(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_link *link = qc->dev->link; + + link->active_tag = ATA_TAG_POISON; + ap->nr_active_links--; + + if (qc->flags & ATA_QCFLAG_CLEAR_EXCL && ap->excl_link == link) + ap->excl_link = NULL; + + qc->flags &= ~ATA_QCFLAG_ACTIVE; + ap->qc_active &= ~(1 << qc->tag); +} + +static void ata_qc_free(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int tag; + qc->flags = 0; + tag = qc->tag; + if (tag < ATA_MAX_QUEUE) { + qc->tag = ATA_TAG_POISON; + clear_bit(tag, &ap->qc_allocated); + } +} + +static int check_sata_dev_state(void) +{ + unsigned long datalen; + unsigned char *pdata; + int ret = 0; + int i = 0; + char temp_data_buf[512]; + + while (1) { + udelay(10000); + + pdata = (unsigned char*)&temp_data_buf[0]; + datalen = 512; + + ret = ata_dev_read_sectors(pdata, datalen, 0, 1); + + if (ret == true) + break; + + i++; + if (i > (ATA_RESET_TIME * 100)) { + printf("** TimeOUT **\n"); + dev_state = SATA_NODEVICE; + return false; + } + + if ((i >= 100) && ((i % 100) == 0)) + printf("."); + } + + dev_state = SATA_READY; + + return true; +} + +static unsigned int ata_dev_set_feature(struct ata_device *dev, + u8 enable, u8 feature) +{ + struct ata_taskfile tf; + struct ata_port *ap; + ap = pap; + unsigned int err_mask; + + memset(&tf, 0, sizeof(tf)); + tf.ctl = ap->ctl; + + tf.device = ATA_DEVICE_OBS; + tf.command = ATA_CMD_SET_FEATURES; + tf.feature = enable; + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.protocol = ATA_PROT_NODATA; + tf.nsect = feature; + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, 0, 0); + + return err_mask; +} + +static unsigned int ata_dev_init_params(struct ata_device *dev, + u16 heads, u16 sectors) +{ + struct ata_taskfile tf; + struct ata_port *ap; + ap = pap; + unsigned int err_mask; + + if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16) + return AC_ERR_INVALID; + + memset(&tf, 0, sizeof(tf)); + tf.ctl = ap->ctl; + tf.device = ATA_DEVICE_OBS; + tf.command = ATA_CMD_INIT_DEV_PARAMS; + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.protocol = ATA_PROT_NODATA; + tf.nsect = sectors; + tf.device |= (heads - 1) & 0x0f; + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, 0, 0); + + if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED)) + err_mask = 0; + + return err_mask; +} + +#if defined(CONFIG_SATA_DWC) && !defined(CONFIG_LBA48) +#define SATA_MAX_READ_BLK 0xFF +#else +#define SATA_MAX_READ_BLK 0xFFFF +#endif + +ulong sata_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer) +{ + ulong start,blks, buf_addr; + unsigned short smallblks; + unsigned long datalen; + unsigned char *pdata; + device &= 0xff; + + u32 block = 0; + u32 n_block = 0; + + if (dev_state != SATA_READY) + return 0; + + buf_addr = (unsigned long)buffer; + start = blknr; + blks = blkcnt; + do { + pdata = (unsigned char *)buf_addr; + if (blks > SATA_MAX_READ_BLK) { + datalen = sata_dev_desc[device].blksz * SATA_MAX_READ_BLK; + smallblks = SATA_MAX_READ_BLK; + + block = (u32)start; + n_block = (u32)smallblks; + + start += SATA_MAX_READ_BLK; + blks -= SATA_MAX_READ_BLK; + } else { + datalen = sata_dev_desc[device].blksz * SATA_MAX_READ_BLK; + datalen = sata_dev_desc[device].blksz * blks; + smallblks = (unsigned short)blks; + + block = (u32)start; + n_block = (u32)smallblks; + + start += blks; + blks = 0; + } + + if (ata_dev_read_sectors(pdata, datalen, block, n_block) != true) { + printf("sata_dwc : Hard disk read error.\n"); + blkcnt -= blks; + break; + } + buf_addr += datalen; + } while (blks != 0); + + return (blkcnt); +} + +static int ata_dev_read_sectors(unsigned char *pdata, unsigned long datalen, + u32 block, u32 n_block) +{ + struct ata_port *ap = pap; + struct ata_device *dev = &ata_device; + struct ata_taskfile tf; + unsigned int class = ATA_DEV_ATA; + unsigned int err_mask = 0; + const char *reason; + int may_fallback = 1; + + if (dev_state == SATA_ERROR) + return false; + + ata_dev_select(ap, dev->devno, 1, 1); + +retry: + memset(&tf, 0, sizeof(tf)); + tf.ctl = ap->ctl; + ap->print_id = 1; + ap->flags &= ~ATA_FLAG_DISABLED; + + ap->pdata = pdata; + + tf.device = ATA_DEVICE_OBS; + + temp_n_block = n_block; + +#ifdef CONFIG_LBA48 + tf.command = ATA_CMD_PIO_READ_EXT; + tf.flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48; + + tf.hob_feature = 31; + tf.feature = 31; + tf.hob_nsect = (n_block >> 8) & 0xff; + tf.nsect = n_block & 0xff; + + tf.hob_lbah = 0x0; + tf.hob_lbam = 0x0; + tf.hob_lbal = (block >> 24) & 0xff; + tf.lbah = (block >> 16) & 0xff; + tf.lbam = (block >> 8) & 0xff; + tf.lbal = block & 0xff; + + tf.device = 1 << 6; + if (tf.flags & ATA_TFLAG_FUA) + tf.device |= 1 << 7; +#else + tf.command = ATA_CMD_PIO_READ; + tf.flags |= ATA_TFLAG_LBA ; + + tf.feature = 31; + tf.nsect = n_block & 0xff; + + tf.lbah = (block >> 16) & 0xff; + tf.lbam = (block >> 8) & 0xff; + tf.lbal = block & 0xff; + + tf.device = (block >> 24) & 0xf; + + tf.device |= 1 << 6; + if (tf.flags & ATA_TFLAG_FUA) + tf.device |= 1 << 7; + +#endif + + tf.protocol = ATA_PROT_PIO; + + /* Some devices choke if TF registers contain garbage. Make + * sure those are properly initialized. + */ + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.flags |= ATA_TFLAG_POLLING; + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, 0, 0); + + if (err_mask) { + if (err_mask & AC_ERR_NODEV_HINT) { + printf("READ_SECTORS NODEV after polling detection\n"); + return -ENOENT; + } + + if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) { + /* Device or controller might have reported + * the wrong device class. Give a shot at the + * other IDENTIFY if the current one is + * aborted by the device. + */ + if (may_fallback) { + may_fallback = 0; + + if (class == ATA_DEV_ATA) { + class = ATA_DEV_ATAPI; + } else { + class = ATA_DEV_ATA; + } + goto retry; + } + /* Control reaches here iff the device aborted + * both flavors of IDENTIFYs which happens + * sometimes with phantom devices. + */ + printf("both IDENTIFYs aborted, assuming NODEV\n"); + return -ENOENT; + } + + reason = "I/O error"; + goto err_out; + } + + return true; + +err_out: + printf("failed to READ SECTORS (%s, err_mask=0x%x)\n", reason, err_mask); + return false; +} + +#if defined(CONFIG_SATA_DWC) && !defined(CONFIG_LBA48) +#define SATA_MAX_WRITE_BLK 0xFF +#else +#define SATA_MAX_WRITE_BLK 0xFFFF +#endif + +ulong sata_write(int device, ulong blknr, lbaint_t blkcnt, const void *buffer) +{ + ulong start,blks, buf_addr; + unsigned short smallblks; + unsigned long datalen; + unsigned char *pdata; + device &= 0xff; + + + u32 block = 0; + u32 n_block = 0; + + if (dev_state != SATA_READY) + return 0; + + buf_addr = (unsigned long)buffer; + start = blknr; + blks = blkcnt; + do { + pdata = (unsigned char *)buf_addr; + if (blks > SATA_MAX_WRITE_BLK) { + datalen = sata_dev_desc[device].blksz * SATA_MAX_WRITE_BLK; + smallblks = SATA_MAX_WRITE_BLK; + + block = (u32)start; + n_block = (u32)smallblks; + + start += SATA_MAX_WRITE_BLK; + blks -= SATA_MAX_WRITE_BLK; + } else { + datalen = sata_dev_desc[device].blksz * blks; + smallblks = (unsigned short)blks; + + block = (u32)start; + n_block = (u32)smallblks; + + start += blks; + blks = 0; + } + + if (ata_dev_write_sectors(pdata, datalen, block, n_block) != true) { + printf("sata_dwc : Hard disk read error.\n"); + blkcnt -= blks; + break; + } + buf_addr += datalen; + } while (blks != 0); + + return (blkcnt); +} + +static int ata_dev_write_sectors(unsigned char* pdata, unsigned long datalen, + u32 block, u32 n_block) +{ + struct ata_port *ap = pap; + struct ata_device *dev = &ata_device; + struct ata_taskfile tf; + unsigned int class = ATA_DEV_ATA; + unsigned int err_mask = 0; + const char *reason; + int may_fallback = 1; + + if (dev_state == SATA_ERROR) + return false; + + ata_dev_select(ap, dev->devno, 1, 1); + +retry: + memset(&tf, 0, sizeof(tf)); + tf.ctl = ap->ctl; + ap->print_id = 1; + ap->flags &= ~ATA_FLAG_DISABLED; + + ap->pdata = pdata; + + tf.device = ATA_DEVICE_OBS; + + temp_n_block = n_block; + + +#ifdef CONFIG_LBA48 + tf.command = ATA_CMD_PIO_WRITE_EXT; + tf.flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48 | ATA_TFLAG_WRITE; + + tf.hob_feature = 31; + tf.feature = 31; + tf.hob_nsect = (n_block >> 8) & 0xff; + tf.nsect = n_block & 0xff; + + tf.hob_lbah = 0x0; + tf.hob_lbam = 0x0; + tf.hob_lbal = (block >> 24) & 0xff; + tf.lbah = (block >> 16) & 0xff; + tf.lbam = (block >> 8) & 0xff; + tf.lbal = block & 0xff; + + tf.device = 1 << 6; + if (tf.flags & ATA_TFLAG_FUA) + tf.device |= 1 << 7; +#else + tf.command = ATA_CMD_PIO_WRITE; + tf.flags |= ATA_TFLAG_LBA | ATA_TFLAG_WRITE; + + tf.feature = 31; + tf.nsect = n_block & 0xff; + + tf.lbah = (block >> 16) & 0xff; + tf.lbam = (block >> 8) & 0xff; + tf.lbal = block & 0xff; + + tf.device = (block >> 24) & 0xf; + + tf.device |= 1 << 6; + if (tf.flags & ATA_TFLAG_FUA) + tf.device |= 1 << 7; + +#endif + + tf.protocol = ATA_PROT_PIO; + + /* Some devices choke if TF registers contain garbage. Make + * sure those are properly initialized. + */ + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.flags |= ATA_TFLAG_POLLING; + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, 0, 0); + + if (err_mask) { + if (err_mask & AC_ERR_NODEV_HINT) { + printf("READ_SECTORS NODEV after polling detection\n"); + return -ENOENT; + } + + if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) { + /* Device or controller might have reported + * the wrong device class. Give a shot at the + * other IDENTIFY if the current one is + * aborted by the device. + */ + if (may_fallback) { + may_fallback = 0; + + if (class == ATA_DEV_ATA) { + class = ATA_DEV_ATAPI; + } else { + class = ATA_DEV_ATA; + } + goto retry; + } + /* Control reaches here iff the device aborted + * both flavors of IDENTIFYs which happens + * sometimes with phantom devices. + */ + printf("both IDENTIFYs aborted, assuming NODEV\n"); + return -ENOENT; + } + + reason = "I/O error"; + goto err_out; + } + + return true; + +err_out: + printf("failed to WRITE SECTORS (%s, err_mask=0x%x)\n", reason, err_mask); + return false; +} diff --git a/drivers/ata/sata_dwc.h b/drivers/ata/sata_dwc.h new file mode 100644 index 0000000000..e2d9e0c1fc --- /dev/null +++ b/drivers/ata/sata_dwc.h @@ -0,0 +1,465 @@ +/* + * sata_dwc.h + * + * Synopsys DesignWare Cores (DWC) SATA host driver + * + * Author: Mark Miesfeld + * + * Ported from 2.6.19.2 to 2.6.25/26 by Stefan Roese + * Copyright 2008 DENX Software Engineering + * + * Based on versions provided by AMCC and Synopsys which are: + * Copyright 2006 Applied Micro Circuits Corporation + * COPYRIGHT (C) 2005 SYNOPSYS, INC. ALL RIGHTS RESERVED + * + * SPDX-License-Identifier: GPL-2.0+ + */ +/* + * SATA support based on the chip canyonlands. + * + * 04-17-2009 + * The local version of this driver for the canyonlands board + * does not use interrupts but polls the chip instead. + */ + + +#ifndef _SATA_DWC_H_ +#define _SATA_DWC_H_ + +#define __U_BOOT__ + +#define HZ 100 +#define READ 0 +#define WRITE 1 + +enum { + ATA_READID_POSTRESET = (1 << 0), + + ATA_DNXFER_PIO = 0, + ATA_DNXFER_DMA = 1, + ATA_DNXFER_40C = 2, + ATA_DNXFER_FORCE_PIO = 3, + ATA_DNXFER_FORCE_PIO0 = 4, + + ATA_DNXFER_QUIET = (1 << 31), +}; + +enum hsm_task_states { + HSM_ST_IDLE, + HSM_ST_FIRST, + HSM_ST, + HSM_ST_LAST, + HSM_ST_ERR, +}; + +#define ATA_SHORT_PAUSE ((HZ >> 6) + 1) + +struct ata_queued_cmd { + struct ata_port *ap; + struct ata_device *dev; + + struct ata_taskfile tf; + u8 cdb[ATAPI_CDB_LEN]; + unsigned long flags; + unsigned int tag; + unsigned int n_elem; + + int dma_dir; + unsigned int sect_size; + + unsigned int nbytes; + unsigned int extrabytes; + unsigned int curbytes; + + unsigned int err_mask; + struct ata_taskfile result_tf; + + void *private_data; +#ifndef __U_BOOT__ + void *lldd_task; +#endif + unsigned char *pdata; +}; + +typedef void (*ata_qc_cb_t) (struct ata_queued_cmd *qc); + +#define ATA_TAG_POISON 0xfafbfcfdU + +enum { + LIBATA_MAX_PRD = ATA_MAX_PRD / 2, + LIBATA_DUMB_MAX_PRD = ATA_MAX_PRD / 4, + ATA_MAX_PORTS = 8, + ATA_DEF_QUEUE = 1, + ATA_MAX_QUEUE = 32, + ATA_TAG_INTERNAL = ATA_MAX_QUEUE - 1, + ATA_MAX_BUS = 2, + ATA_DEF_BUSY_WAIT = 10000, + + ATAPI_MAX_DRAIN = 16 << 10, + + ATA_SHT_EMULATED = 1, + ATA_SHT_CMD_PER_LUN = 1, + ATA_SHT_THIS_ID = -1, + ATA_SHT_USE_CLUSTERING = 1, + + ATA_DFLAG_LBA = (1 << 0), + ATA_DFLAG_LBA48 = (1 << 1), + ATA_DFLAG_CDB_INTR = (1 << 2), + ATA_DFLAG_NCQ = (1 << 3), + ATA_DFLAG_FLUSH_EXT = (1 << 4), + ATA_DFLAG_ACPI_PENDING = (1 << 5), + ATA_DFLAG_ACPI_FAILED = (1 << 6), + ATA_DFLAG_AN = (1 << 7), + ATA_DFLAG_HIPM = (1 << 8), + ATA_DFLAG_DIPM = (1 << 9), + ATA_DFLAG_DMADIR = (1 << 10), + ATA_DFLAG_CFG_MASK = (1 << 12) - 1, + + ATA_DFLAG_PIO = (1 << 12), + ATA_DFLAG_NCQ_OFF = (1 << 13), + ATA_DFLAG_SPUNDOWN = (1 << 14), + ATA_DFLAG_SLEEPING = (1 << 15), + ATA_DFLAG_DUBIOUS_XFER = (1 << 16), + ATA_DFLAG_INIT_MASK = (1 << 24) - 1, + + ATA_DFLAG_DETACH = (1 << 24), + ATA_DFLAG_DETACHED = (1 << 25), + + ATA_LFLAG_HRST_TO_RESUME = (1 << 0), + ATA_LFLAG_SKIP_D2H_BSY = (1 << 1), + ATA_LFLAG_NO_SRST = (1 << 2), + ATA_LFLAG_ASSUME_ATA = (1 << 3), + ATA_LFLAG_ASSUME_SEMB = (1 << 4), + ATA_LFLAG_ASSUME_CLASS = ATA_LFLAG_ASSUME_ATA | ATA_LFLAG_ASSUME_SEMB, + ATA_LFLAG_NO_RETRY = (1 << 5), + ATA_LFLAG_DISABLED = (1 << 6), + + ATA_FLAG_SLAVE_POSS = (1 << 0), + ATA_FLAG_SATA = (1 << 1), + ATA_FLAG_NO_LEGACY = (1 << 2), + ATA_FLAG_MMIO = (1 << 3), + ATA_FLAG_SRST = (1 << 4), + ATA_FLAG_SATA_RESET = (1 << 5), + ATA_FLAG_NO_ATAPI = (1 << 6), + ATA_FLAG_PIO_DMA = (1 << 7), + ATA_FLAG_PIO_LBA48 = (1 << 8), + ATA_FLAG_PIO_POLLING = (1 << 9), + ATA_FLAG_NCQ = (1 << 10), + ATA_FLAG_DEBUGMSG = (1 << 13), + ATA_FLAG_IGN_SIMPLEX = (1 << 15), + ATA_FLAG_NO_IORDY = (1 << 16), + ATA_FLAG_ACPI_SATA = (1 << 17), + ATA_FLAG_AN = (1 << 18), + ATA_FLAG_PMP = (1 << 19), + ATA_FLAG_IPM = (1 << 20), + + ATA_FLAG_DISABLED = (1 << 23), + + ATA_PFLAG_EH_PENDING = (1 << 0), + ATA_PFLAG_EH_IN_PROGRESS = (1 << 1), + ATA_PFLAG_FROZEN = (1 << 2), + ATA_PFLAG_RECOVERED = (1 << 3), + ATA_PFLAG_LOADING = (1 << 4), + ATA_PFLAG_UNLOADING = (1 << 5), + ATA_PFLAG_SCSI_HOTPLUG = (1 << 6), + ATA_PFLAG_INITIALIZING = (1 << 7), + ATA_PFLAG_RESETTING = (1 << 8), + ATA_PFLAG_SUSPENDED = (1 << 17), + ATA_PFLAG_PM_PENDING = (1 << 18), + + ATA_QCFLAG_ACTIVE = (1 << 0), + ATA_QCFLAG_DMAMAP = (1 << 1), + ATA_QCFLAG_IO = (1 << 3), + ATA_QCFLAG_RESULT_TF = (1 << 4), + ATA_QCFLAG_CLEAR_EXCL = (1 << 5), + ATA_QCFLAG_QUIET = (1 << 6), + + ATA_QCFLAG_FAILED = (1 << 16), + ATA_QCFLAG_SENSE_VALID = (1 << 17), + ATA_QCFLAG_EH_SCHEDULED = (1 << 18), + + ATA_HOST_SIMPLEX = (1 << 0), + ATA_HOST_STARTED = (1 << 1), + + ATA_TMOUT_BOOT = 30 * 100, + ATA_TMOUT_BOOT_QUICK = 7 * 100, + ATA_TMOUT_INTERNAL = 30 * 100, + ATA_TMOUT_INTERNAL_QUICK = 5 * 100, + + /* FIXME: GoVault needs 2s but we can't afford that without + * parallel probing. 800ms is enough for iVDR disk + * HHD424020F7SV00. Increase to 2secs when parallel probing + * is in place. + */ + ATA_TMOUT_FF_WAIT = 4 * 100 / 5, + + BUS_UNKNOWN = 0, + BUS_DMA = 1, + BUS_IDLE = 2, + BUS_NOINTR = 3, + BUS_NODATA = 4, + BUS_TIMER = 5, + BUS_PIO = 6, + BUS_EDD = 7, + BUS_IDENTIFY = 8, + BUS_PACKET = 9, + + PORT_UNKNOWN = 0, + PORT_ENABLED = 1, + PORT_DISABLED = 2, + + /* encoding various smaller bitmaps into a single + * unsigned long bitmap + */ + ATA_NR_PIO_MODES = 7, + ATA_NR_MWDMA_MODES = 5, + ATA_NR_UDMA_MODES = 8, + + ATA_SHIFT_PIO = 0, + ATA_SHIFT_MWDMA = ATA_SHIFT_PIO + ATA_NR_PIO_MODES, + ATA_SHIFT_UDMA = ATA_SHIFT_MWDMA + ATA_NR_MWDMA_MODES, + + ATA_DMA_PAD_SZ = 4, + + ATA_ERING_SIZE = 32, + + ATA_DEFER_LINK = 1, + ATA_DEFER_PORT = 2, + + ATA_EH_DESC_LEN = 80, + + ATA_EH_REVALIDATE = (1 << 0), + ATA_EH_SOFTRESET = (1 << 1), + ATA_EH_HARDRESET = (1 << 2), + ATA_EH_ENABLE_LINK = (1 << 3), + ATA_EH_LPM = (1 << 4), + + ATA_EH_RESET_MASK = ATA_EH_SOFTRESET | ATA_EH_HARDRESET, + ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE, + + ATA_EHI_HOTPLUGGED = (1 << 0), + ATA_EHI_RESUME_LINK = (1 << 1), + ATA_EHI_NO_AUTOPSY = (1 << 2), + ATA_EHI_QUIET = (1 << 3), + + ATA_EHI_DID_SOFTRESET = (1 << 16), + ATA_EHI_DID_HARDRESET = (1 << 17), + ATA_EHI_PRINTINFO = (1 << 18), + ATA_EHI_SETMODE = (1 << 19), + ATA_EHI_POST_SETMODE = (1 << 20), + + ATA_EHI_DID_RESET = ATA_EHI_DID_SOFTRESET | ATA_EHI_DID_HARDRESET, + ATA_EHI_RESET_MODIFIER_MASK = ATA_EHI_RESUME_LINK, + + ATA_EH_MAX_TRIES = 5, + + ATA_PROBE_MAX_TRIES = 3, + ATA_EH_DEV_TRIES = 3, + ATA_EH_PMP_TRIES = 5, + ATA_EH_PMP_LINK_TRIES = 3, + + SATA_PMP_SCR_TIMEOUT = 250, + + /* Horkage types. May be set by libata or controller on drives + (some horkage may be drive/controller pair dependant */ + + ATA_HORKAGE_DIAGNOSTIC = (1 << 0), + ATA_HORKAGE_NODMA = (1 << 1), + ATA_HORKAGE_NONCQ = (1 << 2), + ATA_HORKAGE_MAX_SEC_128 = (1 << 3), + ATA_HORKAGE_BROKEN_HPA = (1 << 4), + ATA_HORKAGE_SKIP_PM = (1 << 5), + ATA_HORKAGE_HPA_SIZE = (1 << 6), + ATA_HORKAGE_IPM = (1 << 7), + ATA_HORKAGE_IVB = (1 << 8), + ATA_HORKAGE_STUCK_ERR = (1 << 9), + + ATA_DMA_MASK_ATA = (1 << 0), + ATA_DMA_MASK_ATAPI = (1 << 1), + ATA_DMA_MASK_CFA = (1 << 2), + + ATAPI_READ = 0, + ATAPI_WRITE = 1, + ATAPI_READ_CD = 2, + ATAPI_PASS_THRU = 3, + ATAPI_MISC = 4, +}; + +enum ata_completion_errors { + AC_ERR_DEV = (1 << 0), + AC_ERR_HSM = (1 << 1), + AC_ERR_TIMEOUT = (1 << 2), + AC_ERR_MEDIA = (1 << 3), + AC_ERR_ATA_BUS = (1 << 4), + AC_ERR_HOST_BUS = (1 << 5), + AC_ERR_SYSTEM = (1 << 6), + AC_ERR_INVALID = (1 << 7), + AC_ERR_OTHER = (1 << 8), + AC_ERR_NODEV_HINT = (1 << 9), + AC_ERR_NCQ = (1 << 10), +}; + +enum ata_xfer_mask { + ATA_MASK_PIO = ((1LU << ATA_NR_PIO_MODES) - 1) << ATA_SHIFT_PIO, + ATA_MASK_MWDMA = ((1LU << ATA_NR_MWDMA_MODES) - 1) << ATA_SHIFT_MWDMA, + ATA_MASK_UDMA = ((1LU << ATA_NR_UDMA_MODES) - 1) << ATA_SHIFT_UDMA, +}; + +struct ata_port_info { +#ifndef __U_BOOT__ + struct scsi_host_template *sht; +#endif + unsigned long flags; + unsigned long link_flags; + unsigned long pio_mask; + unsigned long mwdma_mask; + unsigned long udma_mask; +#ifndef __U_BOOT__ + const struct ata_port_operations *port_ops; + void *private_data; +#endif +}; + +struct ata_ioports { + void __iomem *cmd_addr; + void __iomem *data_addr; + void __iomem *error_addr; + void __iomem *feature_addr; + void __iomem *nsect_addr; + void __iomem *lbal_addr; + void __iomem *lbam_addr; + void __iomem *lbah_addr; + void __iomem *device_addr; + void __iomem *status_addr; + void __iomem *command_addr; + void __iomem *altstatus_addr; + void __iomem *ctl_addr; +#ifndef __U_BOOT__ + void __iomem *bmdma_addr; +#endif + void __iomem *scr_addr; +}; + +struct ata_host { +#ifndef __U_BOOT__ + void __iomem * const *iomap; + void *private_data; + const struct ata_port_operations *ops; + unsigned long flags; + struct ata_port *simplex_claimed; +#endif + unsigned int n_ports; + struct ata_port *ports[0]; +}; + +#ifndef __U_BOOT__ +struct ata_port_stats { + unsigned long unhandled_irq; + unsigned long idle_irq; + unsigned long rw_reqbuf; +}; +#endif + +struct ata_device { + struct ata_link *link; + unsigned int devno; + unsigned long flags; + unsigned int horkage; +#ifndef __U_BOOT__ + struct scsi_device *sdev; +#ifdef CONFIG_ATA_ACPI + acpi_handle acpi_handle; + union acpi_object *gtf_cache; +#endif +#endif + u64 n_sectors; + unsigned int class; + + union { + u16 id[ATA_ID_WORDS]; + u32 gscr[SATA_PMP_GSCR_DWORDS]; + }; +#ifndef __U_BOOT__ + u8 pio_mode; + u8 dma_mode; + u8 xfer_mode; + unsigned int xfer_shift; +#endif + unsigned int multi_count; + unsigned int max_sectors; + unsigned int cdb_len; +#ifndef __U_BOOT__ + unsigned long pio_mask; + unsigned long mwdma_mask; +#endif + unsigned long udma_mask; + u16 cylinders; + u16 heads; + u16 sectors; +#ifndef __U_BOOT__ + int spdn_cnt; +#endif +}; + +enum dma_data_direction { + DMA_BIDIRECTIONAL = 0, + DMA_TO_DEVICE = 1, + DMA_FROM_DEVICE = 2, + DMA_NONE = 3, +}; + +struct ata_link { + struct ata_port *ap; + int pmp; + unsigned int active_tag; + u32 sactive; + unsigned int flags; + unsigned int hw_sata_spd_limit; +#ifndef __U_BOOT__ + unsigned int sata_spd_limit; + unsigned int sata_spd; + struct ata_device device[2]; +#endif +}; + +struct ata_port { + unsigned long flags; + unsigned int pflags; + unsigned int print_id; + unsigned int port_no; + + struct ata_ioports ioaddr; + + u8 ctl; + u8 last_ctl; + unsigned int pio_mask; + unsigned int mwdma_mask; + unsigned int udma_mask; + unsigned int cbl; + + struct ata_queued_cmd qcmd[ATA_MAX_QUEUE]; + unsigned long qc_allocated; + unsigned int qc_active; + int nr_active_links; + + struct ata_link link; +#ifndef __U_BOOT__ + int nr_pmp_links; + struct ata_link *pmp_link; +#endif + struct ata_link *excl_link; + int nr_pmp_links; +#ifndef __U_BOOT__ + struct ata_port_stats stats; + struct device *dev; + u32 msg_enable; +#endif + struct ata_host *host; + void *port_task_data; + + unsigned int hsm_task_state; + void *private_data; + unsigned char *pdata; +}; + +#endif diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c new file mode 100644 index 0000000000..78e3da442d --- /dev/null +++ b/drivers/ata/sata_mv.c @@ -0,0 +1,1051 @@ +/* + * Copyright (C) Excito Elektronik i Skåne AB, 2010. + * Author: Tor Krill + * + * Copyright (C) 2015 Stefan Roese + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * This driver supports the SATA controller of some Mavell SoC's. + * Here a (most likely incomplete) list of the supported SoC's: + * - Kirkwood + * - Armada 370 + * - Armada XP + * + * This driver implementation is an alternative to the already available + * driver via the "ide" commands interface (drivers/block/mvsata_ide.c). + * But this driver only supports PIO mode and as this new driver also + * supports transfer via DMA, its much faster. + * + * Please note, that the newer SoC's (e.g. Armada 38x) are not supported + * by this driver. As they have an AHCI compatible SATA controller + * integrated. + */ + +/* + * TODO: + * Better error recovery + * No support for using PRDs (Thus max 64KB transfers) + * No NCQ support + * No port multiplier support + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_KIRKWOOD) +#include +#define SATAHC_BASE KW_SATA_BASE +#else +#include +#define SATAHC_BASE MVEBU_AXP_SATA_BASE +#endif + +#define SATA0_BASE (SATAHC_BASE + 0x2000) +#define SATA1_BASE (SATAHC_BASE + 0x4000) + +/* EDMA registers */ +#define EDMA_CFG 0x000 +#define EDMA_CFG_NCQ (1 << 5) +#define EDMA_CFG_EQUE (1 << 9) +#define EDMA_TIMER 0x004 +#define EDMA_IECR 0x008 +#define EDMA_IEMR 0x00c +#define EDMA_RQBA_HI 0x010 +#define EDMA_RQIPR 0x014 +#define EDMA_RQIPR_IPMASK (0x1f << 5) +#define EDMA_RQIPR_IPSHIFT 5 +#define EDMA_RQOPR 0x018 +#define EDMA_RQOPR_OPMASK (0x1f << 5) +#define EDMA_RQOPR_OPSHIFT 5 +#define EDMA_RSBA_HI 0x01c +#define EDMA_RSIPR 0x020 +#define EDMA_RSIPR_IPMASK (0x1f << 3) +#define EDMA_RSIPR_IPSHIFT 3 +#define EDMA_RSOPR 0x024 +#define EDMA_RSOPR_OPMASK (0x1f << 3) +#define EDMA_RSOPR_OPSHIFT 3 +#define EDMA_CMD 0x028 +#define EDMA_CMD_ENEDMA (0x01 << 0) +#define EDMA_CMD_DISEDMA (0x01 << 1) +#define EDMA_CMD_ATARST (0x01 << 2) +#define EDMA_CMD_FREEZE (0x01 << 4) +#define EDMA_TEST_CTL 0x02c +#define EDMA_STATUS 0x030 +#define EDMA_IORTO 0x034 +#define EDMA_CDTR 0x040 +#define EDMA_HLTCND 0x060 +#define EDMA_NTSR 0x094 + +/* Basic DMA registers */ +#define BDMA_CMD 0x224 +#define BDMA_STATUS 0x228 +#define BDMA_DTLB 0x22c +#define BDMA_DTHB 0x230 +#define BDMA_DRL 0x234 +#define BDMA_DRH 0x238 + +/* SATA Interface registers */ +#define SIR_ICFG 0x050 +#define SIR_CFG_GEN2EN (0x1 << 7) +#define SIR_PLL_CFG 0x054 +#define SIR_SSTATUS 0x300 +#define SSTATUS_DET_MASK (0x0f << 0) +#define SIR_SERROR 0x304 +#define SIR_SCONTROL 0x308 +#define SIR_SCONTROL_DETEN (0x01 << 0) +#define SIR_LTMODE 0x30c +#define SIR_LTMODE_NELBE (0x01 << 7) +#define SIR_PHYMODE3 0x310 +#define SIR_PHYMODE4 0x314 +#define SIR_PHYMODE1 0x32c +#define SIR_PHYMODE2 0x330 +#define SIR_BIST_CTRL 0x334 +#define SIR_BIST_DW1 0x338 +#define SIR_BIST_DW2 0x33c +#define SIR_SERR_IRQ_MASK 0x340 +#define SIR_SATA_IFCTRL 0x344 +#define SIR_SATA_TESTCTRL 0x348 +#define SIR_SATA_IFSTATUS 0x34c +#define SIR_VEND_UNIQ 0x35c +#define SIR_FIS_CFG 0x360 +#define SIR_FIS_IRQ_CAUSE 0x364 +#define SIR_FIS_IRQ_MASK 0x368 +#define SIR_FIS_DWORD0 0x370 +#define SIR_FIS_DWORD1 0x374 +#define SIR_FIS_DWORD2 0x378 +#define SIR_FIS_DWORD3 0x37c +#define SIR_FIS_DWORD4 0x380 +#define SIR_FIS_DWORD5 0x384 +#define SIR_FIS_DWORD6 0x388 +#define SIR_PHYM9_GEN2 0x398 +#define SIR_PHYM9_GEN1 0x39c +#define SIR_PHY_CFG 0x3a0 +#define SIR_PHYCTL 0x3a4 +#define SIR_PHYM10 0x3a8 +#define SIR_PHYM12 0x3b0 + +/* Shadow registers */ +#define PIO_DATA 0x100 +#define PIO_ERR_FEATURES 0x104 +#define PIO_SECTOR_COUNT 0x108 +#define PIO_LBA_LOW 0x10c +#define PIO_LBA_MID 0x110 +#define PIO_LBA_HI 0x114 +#define PIO_DEVICE 0x118 +#define PIO_CMD_STATUS 0x11c +#define PIO_STATUS_ERR (0x01 << 0) +#define PIO_STATUS_DRQ (0x01 << 3) +#define PIO_STATUS_DF (0x01 << 5) +#define PIO_STATUS_DRDY (0x01 << 6) +#define PIO_STATUS_BSY (0x01 << 7) +#define PIO_CTRL_ALTSTAT 0x120 + +/* SATAHC arbiter registers */ +#define SATAHC_CFG 0x000 +#define SATAHC_RQOP 0x004 +#define SATAHC_RQIP 0x008 +#define SATAHC_ICT 0x00c +#define SATAHC_ITT 0x010 +#define SATAHC_ICR 0x014 +#define SATAHC_ICR_PORT0 (0x01 << 0) +#define SATAHC_ICR_PORT1 (0x01 << 1) +#define SATAHC_MIC 0x020 +#define SATAHC_MIM 0x024 +#define SATAHC_LED_CFG 0x02c + +#define REQUEST_QUEUE_SIZE 32 +#define RESPONSE_QUEUE_SIZE REQUEST_QUEUE_SIZE + +struct crqb { + u32 dtb_low; /* DW0 */ + u32 dtb_high; /* DW1 */ + u32 control_flags; /* DW2 */ + u32 drb_count; /* DW3 */ + u32 ata_cmd_feat; /* DW4 */ + u32 ata_addr; /* DW5 */ + u32 ata_addr_exp; /* DW6 */ + u32 ata_sect_count; /* DW7 */ +}; + +#define CRQB_ALIGN 0x400 + +#define CRQB_CNTRLFLAGS_DIR (0x01 << 0) +#define CRQB_CNTRLFLAGS_DQTAGMASK (0x1f << 1) +#define CRQB_CNTRLFLAGS_DQTAGSHIFT 1 +#define CRQB_CNTRLFLAGS_PMPORTMASK (0x0f << 12) +#define CRQB_CNTRLFLAGS_PMPORTSHIFT 12 +#define CRQB_CNTRLFLAGS_PRDMODE (0x01 << 16) +#define CRQB_CNTRLFLAGS_HQTAGMASK (0x1f << 17) +#define CRQB_CNTRLFLAGS_HQTAGSHIFT 17 + +#define CRQB_CMDFEAT_CMDMASK (0xff << 16) +#define CRQB_CMDFEAT_CMDSHIFT 16 +#define CRQB_CMDFEAT_FEATMASK (0xff << 16) +#define CRQB_CMDFEAT_FEATSHIFT 24 + +#define CRQB_ADDR_LBA_LOWMASK (0xff << 0) +#define CRQB_ADDR_LBA_LOWSHIFT 0 +#define CRQB_ADDR_LBA_MIDMASK (0xff << 8) +#define CRQB_ADDR_LBA_MIDSHIFT 8 +#define CRQB_ADDR_LBA_HIGHMASK (0xff << 16) +#define CRQB_ADDR_LBA_HIGHSHIFT 16 +#define CRQB_ADDR_DEVICE_MASK (0xff << 24) +#define CRQB_ADDR_DEVICE_SHIFT 24 + +#define CRQB_ADDR_LBA_LOW_EXP_MASK (0xff << 0) +#define CRQB_ADDR_LBA_LOW_EXP_SHIFT 0 +#define CRQB_ADDR_LBA_MID_EXP_MASK (0xff << 8) +#define CRQB_ADDR_LBA_MID_EXP_SHIFT 8 +#define CRQB_ADDR_LBA_HIGH_EXP_MASK (0xff << 16) +#define CRQB_ADDR_LBA_HIGH_EXP_SHIFT 16 +#define CRQB_ADDR_FEATURE_EXP_MASK (0xff << 24) +#define CRQB_ADDR_FEATURE_EXP_SHIFT 24 + +#define CRQB_SECTCOUNT_COUNT_MASK (0xff << 0) +#define CRQB_SECTCOUNT_COUNT_SHIFT 0 +#define CRQB_SECTCOUNT_COUNT_EXP_MASK (0xff << 8) +#define CRQB_SECTCOUNT_COUNT_EXP_SHIFT 8 + +#define MVSATA_WIN_CONTROL(w) (MVEBU_AXP_SATA_BASE + 0x30 + ((w) << 4)) +#define MVSATA_WIN_BASE(w) (MVEBU_AXP_SATA_BASE + 0x34 + ((w) << 4)) + +struct eprd { + u32 phyaddr_low; + u32 bytecount_eot; + u32 phyaddr_hi; + u32 reserved; +}; + +#define EPRD_PHYADDR_MASK 0xfffffffe +#define EPRD_BYTECOUNT_MASK 0x0000ffff +#define EPRD_EOT (0x01 << 31) + +struct crpb { + u32 id; + u32 flags; + u32 timestamp; +}; + +#define CRPB_ALIGN 0x100 + +#define READ_CMD 0 +#define WRITE_CMD 1 + +/* + * Since we don't use PRDs yet max transfer size + * is 64KB + */ +#define MV_ATA_MAX_SECTORS (65535 / ATA_SECT_SIZE) + +/* Keep track if hw is initialized or not */ +static u32 hw_init; + +struct mv_priv { + char name[12]; + u32 link; + u32 regbase; + u32 queue_depth; + u16 pio; + u16 mwdma; + u16 udma; + + void *crqb_alloc; + struct crqb *request; + + void *crpb_alloc; + struct crpb *response; +}; + +static int ata_wait_register(u32 *addr, u32 mask, u32 val, u32 timeout_msec) +{ + ulong start; + + start = get_timer(0); + do { + if ((in_le32(addr) & mask) == val) + return 0; + } while (get_timer(start) < timeout_msec); + + return -ETIMEDOUT; +} + +/* Cut from sata_mv in linux kernel */ +static int mv_stop_edma_engine(int port) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + int i; + + /* Disable eDMA. The disable bit auto clears. */ + out_le32(priv->regbase + EDMA_CMD, EDMA_CMD_DISEDMA); + + /* Wait for the chip to confirm eDMA is off. */ + for (i = 10000; i > 0; i--) { + u32 reg = in_le32(priv->regbase + EDMA_CMD); + if (!(reg & EDMA_CMD_ENEDMA)) { + debug("EDMA stop on port %d succesful\n", port); + return 0; + } + udelay(10); + } + debug("EDMA stop on port %d failed\n", port); + return -1; +} + +static int mv_start_edma_engine(int port) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + u32 tmp; + + /* Check preconditions */ + tmp = in_le32(priv->regbase + SIR_SSTATUS); + if ((tmp & SSTATUS_DET_MASK) != 0x03) { + printf("Device error on port: %d\n", port); + return -1; + } + + tmp = in_le32(priv->regbase + PIO_CMD_STATUS); + if (tmp & (ATA_BUSY | ATA_DRQ)) { + printf("Device not ready on port: %d\n", port); + return -1; + } + + /* Clear interrupt cause */ + out_le32(priv->regbase + EDMA_IECR, 0x0); + + tmp = in_le32(SATAHC_BASE + SATAHC_ICR); + tmp &= ~(port == 0 ? SATAHC_ICR_PORT0 : SATAHC_ICR_PORT1); + out_le32(SATAHC_BASE + SATAHC_ICR, tmp); + + /* Configure edma operation */ + tmp = in_le32(priv->regbase + EDMA_CFG); + tmp &= ~EDMA_CFG_NCQ; /* No NCQ */ + tmp &= ~EDMA_CFG_EQUE; /* Dont queue operations */ + out_le32(priv->regbase + EDMA_CFG, tmp); + + out_le32(priv->regbase + SIR_FIS_IRQ_CAUSE, 0x0); + + /* Configure fis, set all to no-wait for now */ + out_le32(priv->regbase + SIR_FIS_CFG, 0x0); + + /* Setup request queue */ + out_le32(priv->regbase + EDMA_RQBA_HI, 0x0); + out_le32(priv->regbase + EDMA_RQIPR, priv->request); + out_le32(priv->regbase + EDMA_RQOPR, 0x0); + + /* Setup response queue */ + out_le32(priv->regbase + EDMA_RSBA_HI, 0x0); + out_le32(priv->regbase + EDMA_RSOPR, priv->response); + out_le32(priv->regbase + EDMA_RSIPR, 0x0); + + /* Start edma */ + out_le32(priv->regbase + EDMA_CMD, EDMA_CMD_ENEDMA); + + return 0; +} + +static int mv_reset_channel(int port) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + + /* Make sure edma is stopped */ + mv_stop_edma_engine(port); + + out_le32(priv->regbase + EDMA_CMD, EDMA_CMD_ATARST); + udelay(25); /* allow reset propagation */ + out_le32(priv->regbase + EDMA_CMD, 0); + mdelay(10); + + return 0; +} + +static void mv_reset_port(int port) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + + mv_reset_channel(port); + + out_le32(priv->regbase + EDMA_CMD, 0x0); + out_le32(priv->regbase + EDMA_CFG, 0x101f); + out_le32(priv->regbase + EDMA_IECR, 0x0); + out_le32(priv->regbase + EDMA_IEMR, 0x0); + out_le32(priv->regbase + EDMA_RQBA_HI, 0x0); + out_le32(priv->regbase + EDMA_RQIPR, 0x0); + out_le32(priv->regbase + EDMA_RQOPR, 0x0); + out_le32(priv->regbase + EDMA_RSBA_HI, 0x0); + out_le32(priv->regbase + EDMA_RSIPR, 0x0); + out_le32(priv->regbase + EDMA_RSOPR, 0x0); + out_le32(priv->regbase + EDMA_IORTO, 0xfa); +} + +static void mv_reset_one_hc(void) +{ + out_le32(SATAHC_BASE + SATAHC_ICT, 0x00); + out_le32(SATAHC_BASE + SATAHC_ITT, 0x00); + out_le32(SATAHC_BASE + SATAHC_ICR, 0x00); +} + +static int probe_port(int port) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + int tries, tries2, set15 = 0; + u32 tmp; + + debug("Probe port: %d\n", port); + + for (tries = 0; tries < 2; tries++) { + /* Clear SError */ + out_le32(priv->regbase + SIR_SERROR, 0x0); + + /* trigger com-init */ + tmp = in_le32(priv->regbase + SIR_SCONTROL); + tmp = (tmp & 0x0f0) | 0x300 | SIR_SCONTROL_DETEN; + out_le32(priv->regbase + SIR_SCONTROL, tmp); + + mdelay(1); + + tmp = in_le32(priv->regbase + SIR_SCONTROL); + tries2 = 5; + do { + tmp = (tmp & 0x0f0) | 0x300; + out_le32(priv->regbase + SIR_SCONTROL, tmp); + mdelay(10); + tmp = in_le32(priv->regbase + SIR_SCONTROL); + } while ((tmp & 0xf0f) != 0x300 && tries2--); + + mdelay(10); + + for (tries2 = 0; tries2 < 200; tries2++) { + tmp = in_le32(priv->regbase + SIR_SSTATUS); + if ((tmp & SSTATUS_DET_MASK) == 0x03) { + debug("Found device on port\n"); + return 0; + } + mdelay(1); + } + + if ((tmp & SSTATUS_DET_MASK) == 0) { + debug("No device attached on port %d\n", port); + return -ENODEV; + } + + if (!set15) { + /* Try on 1.5Gb/S */ + debug("Try 1.5Gb link\n"); + set15 = 1; + out_le32(priv->regbase + SIR_SCONTROL, 0x304); + + tmp = in_le32(priv->regbase + SIR_ICFG); + tmp &= ~SIR_CFG_GEN2EN; + out_le32(priv->regbase + SIR_ICFG, tmp); + + mv_reset_channel(port); + } + } + + debug("Failed to probe port\n"); + return -1; +} + +/* Get request queue in pointer */ +static int get_reqip(int port) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + u32 tmp; + + tmp = in_le32(priv->regbase + EDMA_RQIPR) & EDMA_RQIPR_IPMASK; + tmp = tmp >> EDMA_RQIPR_IPSHIFT; + + return tmp; +} + +static void set_reqip(int port, int reqin) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + u32 tmp; + + tmp = in_le32(priv->regbase + EDMA_RQIPR) & ~EDMA_RQIPR_IPMASK; + tmp |= ((reqin << EDMA_RQIPR_IPSHIFT) & EDMA_RQIPR_IPMASK); + out_le32(priv->regbase + EDMA_RQIPR, tmp); +} + +/* Get next available slot, ignoring possible overwrite */ +static int get_next_reqip(int port) +{ + int slot = get_reqip(port); + slot = (slot + 1) % REQUEST_QUEUE_SIZE; + return slot; +} + +/* Get response queue in pointer */ +static int get_rspip(int port) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + u32 tmp; + + tmp = in_le32(priv->regbase + EDMA_RSIPR) & EDMA_RSIPR_IPMASK; + tmp = tmp >> EDMA_RSIPR_IPSHIFT; + + return tmp; +} + +/* Get response queue out pointer */ +static int get_rspop(int port) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + u32 tmp; + + tmp = in_le32(priv->regbase + EDMA_RSOPR) & EDMA_RSOPR_OPMASK; + tmp = tmp >> EDMA_RSOPR_OPSHIFT; + return tmp; +} + +/* Get next response queue pointer */ +static int get_next_rspop(int port) +{ + return (get_rspop(port) + 1) % RESPONSE_QUEUE_SIZE; +} + +/* Set response queue pointer */ +static void set_rspop(int port, int reqin) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + u32 tmp; + + tmp = in_le32(priv->regbase + EDMA_RSOPR) & ~EDMA_RSOPR_OPMASK; + tmp |= ((reqin << EDMA_RSOPR_OPSHIFT) & EDMA_RSOPR_OPMASK); + + out_le32(priv->regbase + EDMA_RSOPR, tmp); +} + +static int wait_dma_completion(int port, int index, u32 timeout_msec) +{ + u32 tmp, res; + + tmp = port == 0 ? SATAHC_ICR_PORT0 : SATAHC_ICR_PORT1; + res = ata_wait_register((u32 *)(SATAHC_BASE + SATAHC_ICR), tmp, + tmp, timeout_msec); + if (res) + printf("Failed to wait for completion on port %d\n", port); + + return res; +} + +static void process_responses(int port) +{ +#ifdef DEBUG + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; +#endif + u32 tmp; + u32 outind = get_rspop(port); + + /* Ack interrupts */ + tmp = in_le32(SATAHC_BASE + SATAHC_ICR); + if (port == 0) + tmp &= ~(BIT(0) | BIT(8)); + else + tmp &= ~(BIT(1) | BIT(9)); + tmp &= ~(BIT(4)); + out_le32(SATAHC_BASE + SATAHC_ICR, tmp); + + while (get_rspip(port) != outind) { +#ifdef DEBUG + debug("Response index %d flags %08x on port %d\n", outind, + priv->response[outind].flags, port); +#endif + outind = get_next_rspop(port); + set_rspop(port, outind); + } +} + +static int mv_ata_exec_ata_cmd(int port, struct sata_fis_h2d *cfis, + u8 *buffer, u32 len, u32 iswrite) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + struct crqb *req; + int slot; + u32 start; + + if (len >= 64 * 1024) { + printf("We only support <64K transfers for now\n"); + return -1; + } + + /* Initialize request */ + slot = get_reqip(port); + memset(&priv->request[slot], 0, sizeof(struct crqb)); + req = &priv->request[slot]; + + req->dtb_low = (u32)buffer; + + /* Dont use PRDs */ + req->control_flags = CRQB_CNTRLFLAGS_PRDMODE; + req->control_flags |= iswrite ? 0 : CRQB_CNTRLFLAGS_DIR; + req->control_flags |= + ((cfis->pm_port_c << CRQB_CNTRLFLAGS_PMPORTSHIFT) + & CRQB_CNTRLFLAGS_PMPORTMASK); + + req->drb_count = len; + + req->ata_cmd_feat = (cfis->command << CRQB_CMDFEAT_CMDSHIFT) & + CRQB_CMDFEAT_CMDMASK; + req->ata_cmd_feat |= (cfis->features << CRQB_CMDFEAT_FEATSHIFT) & + CRQB_CMDFEAT_FEATMASK; + + req->ata_addr = (cfis->lba_low << CRQB_ADDR_LBA_LOWSHIFT) & + CRQB_ADDR_LBA_LOWMASK; + req->ata_addr |= (cfis->lba_mid << CRQB_ADDR_LBA_MIDSHIFT) & + CRQB_ADDR_LBA_MIDMASK; + req->ata_addr |= (cfis->lba_high << CRQB_ADDR_LBA_HIGHSHIFT) & + CRQB_ADDR_LBA_HIGHMASK; + req->ata_addr |= (cfis->device << CRQB_ADDR_DEVICE_SHIFT) & + CRQB_ADDR_DEVICE_MASK; + + req->ata_addr_exp = (cfis->lba_low_exp << CRQB_ADDR_LBA_LOW_EXP_SHIFT) & + CRQB_ADDR_LBA_LOW_EXP_MASK; + req->ata_addr_exp |= + (cfis->lba_mid_exp << CRQB_ADDR_LBA_MID_EXP_SHIFT) & + CRQB_ADDR_LBA_MID_EXP_MASK; + req->ata_addr_exp |= + (cfis->lba_high_exp << CRQB_ADDR_LBA_HIGH_EXP_SHIFT) & + CRQB_ADDR_LBA_HIGH_EXP_MASK; + req->ata_addr_exp |= + (cfis->features_exp << CRQB_ADDR_FEATURE_EXP_SHIFT) & + CRQB_ADDR_FEATURE_EXP_MASK; + + req->ata_sect_count = + (cfis->sector_count << CRQB_SECTCOUNT_COUNT_SHIFT) & + CRQB_SECTCOUNT_COUNT_MASK; + req->ata_sect_count |= + (cfis->sector_count_exp << CRQB_SECTCOUNT_COUNT_EXP_SHIFT) & + CRQB_SECTCOUNT_COUNT_EXP_MASK; + + /* Flush data */ + start = (u32)req & ~(ARCH_DMA_MINALIGN - 1); + flush_dcache_range(start, + start + ALIGN(sizeof(*req), ARCH_DMA_MINALIGN)); + + /* Trigger operation */ + slot = get_next_reqip(port); + set_reqip(port, slot); + + /* Wait for completion */ + if (wait_dma_completion(port, slot, 10000)) { + printf("ATA operation timed out\n"); + return -1; + } + + process_responses(port); + + /* Invalidate data on read */ + if (buffer && len) { + start = (u32)buffer & ~(ARCH_DMA_MINALIGN - 1); + invalidate_dcache_range(start, + start + ALIGN(len, ARCH_DMA_MINALIGN)); + } + + return len; +} + +static u32 mv_sata_rw_cmd_ext(int port, lbaint_t start, u32 blkcnt, + u8 *buffer, int is_write) +{ + struct sata_fis_h2d cfis; + u32 res; + u64 block; + + block = (u64)start; + + memset(&cfis, 0, sizeof(struct sata_fis_h2d)); + + cfis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis.command = (is_write) ? ATA_CMD_WRITE_EXT : ATA_CMD_READ_EXT; + + cfis.lba_high_exp = (block >> 40) & 0xff; + cfis.lba_mid_exp = (block >> 32) & 0xff; + cfis.lba_low_exp = (block >> 24) & 0xff; + cfis.lba_high = (block >> 16) & 0xff; + cfis.lba_mid = (block >> 8) & 0xff; + cfis.lba_low = block & 0xff; + cfis.device = ATA_LBA; + cfis.sector_count_exp = (blkcnt >> 8) & 0xff; + cfis.sector_count = blkcnt & 0xff; + + res = mv_ata_exec_ata_cmd(port, &cfis, buffer, ATA_SECT_SIZE * blkcnt, + is_write); + + return res >= 0 ? blkcnt : res; +} + +static u32 mv_sata_rw_cmd(int port, lbaint_t start, u32 blkcnt, u8 *buffer, + int is_write) +{ + struct sata_fis_h2d cfis; + lbaint_t block; + u32 res; + + block = start; + + memset(&cfis, 0, sizeof(struct sata_fis_h2d)); + + cfis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis.command = (is_write) ? ATA_CMD_WRITE : ATA_CMD_READ; + cfis.device = ATA_LBA; + + cfis.device |= (block >> 24) & 0xf; + cfis.lba_high = (block >> 16) & 0xff; + cfis.lba_mid = (block >> 8) & 0xff; + cfis.lba_low = block & 0xff; + cfis.sector_count = (u8)(blkcnt & 0xff); + + res = mv_ata_exec_ata_cmd(port, &cfis, buffer, ATA_SECT_SIZE * blkcnt, + is_write); + + return res >= 0 ? blkcnt : res; +} + +static u32 ata_low_level_rw(int dev, lbaint_t blknr, lbaint_t blkcnt, + void *buffer, int is_write) +{ + lbaint_t start, blks; + u8 *addr; + int max_blks; + + debug("%s: %ld %ld\n", __func__, blknr, blkcnt); + + start = blknr; + blks = blkcnt; + addr = (u8 *)buffer; + + max_blks = MV_ATA_MAX_SECTORS; + do { + if (blks > max_blks) { + if (sata_dev_desc[dev].lba48) { + mv_sata_rw_cmd_ext(dev, start, max_blks, addr, + is_write); + } else { + mv_sata_rw_cmd(dev, start, max_blks, addr, + is_write); + } + start += max_blks; + blks -= max_blks; + addr += ATA_SECT_SIZE * max_blks; + } else { + if (sata_dev_desc[dev].lba48) { + mv_sata_rw_cmd_ext(dev, start, blks, addr, + is_write); + } else { + mv_sata_rw_cmd(dev, start, blks, addr, + is_write); + } + start += blks; + blks = 0; + addr += ATA_SECT_SIZE * blks; + } + } while (blks != 0); + + return blkcnt; +} + +static int mv_ata_exec_ata_cmd_nondma(int port, + struct sata_fis_h2d *cfis, u8 *buffer, + u32 len, u32 iswrite) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + int i; + u16 *tp; + + debug("%s\n", __func__); + + out_le32(priv->regbase + PIO_SECTOR_COUNT, cfis->sector_count); + out_le32(priv->regbase + PIO_LBA_HI, cfis->lba_high); + out_le32(priv->regbase + PIO_LBA_MID, cfis->lba_mid); + out_le32(priv->regbase + PIO_LBA_LOW, cfis->lba_low); + out_le32(priv->regbase + PIO_ERR_FEATURES, cfis->features); + out_le32(priv->regbase + PIO_DEVICE, cfis->device); + out_le32(priv->regbase + PIO_CMD_STATUS, cfis->command); + + if (ata_wait_register((u32 *)(priv->regbase + PIO_CMD_STATUS), + ATA_BUSY, 0x0, 10000)) { + debug("Failed to wait for completion\n"); + return -1; + } + + if (len > 0) { + tp = (u16 *)buffer; + for (i = 0; i < len / 2; i++) { + if (iswrite) + out_le16(priv->regbase + PIO_DATA, *tp++); + else + *tp++ = in_le16(priv->regbase + PIO_DATA); + } + } + + return len; +} + +static int mv_sata_identify(int port, u16 *id) +{ + struct sata_fis_h2d h2d; + + memset(&h2d, 0, sizeof(struct sata_fis_h2d)); + + h2d.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + h2d.command = ATA_CMD_ID_ATA; + + /* Give device time to get operational */ + mdelay(10); + + return mv_ata_exec_ata_cmd_nondma(port, &h2d, (u8 *)id, + ATA_ID_WORDS * 2, READ_CMD); +} + +static void mv_sata_xfer_mode(int port, u16 *id) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + + priv->pio = id[ATA_ID_PIO_MODES]; + priv->mwdma = id[ATA_ID_MWDMA_MODES]; + priv->udma = id[ATA_ID_UDMA_MODES]; + debug("pio %04x, mwdma %04x, udma %04x\n", priv->pio, priv->mwdma, + priv->udma); +} + +static void mv_sata_set_features(int port) +{ + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + struct sata_fis_h2d cfis; + u8 udma_cap; + + memset(&cfis, 0, sizeof(struct sata_fis_h2d)); + + cfis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis.command = ATA_CMD_SET_FEATURES; + cfis.features = SETFEATURES_XFER; + + /* First check the device capablity */ + udma_cap = (u8) (priv->udma & 0xff); + + if (udma_cap == ATA_UDMA6) + cfis.sector_count = XFER_UDMA_6; + if (udma_cap == ATA_UDMA5) + cfis.sector_count = XFER_UDMA_5; + if (udma_cap == ATA_UDMA4) + cfis.sector_count = XFER_UDMA_4; + if (udma_cap == ATA_UDMA3) + cfis.sector_count = XFER_UDMA_3; + + mv_ata_exec_ata_cmd_nondma(port, &cfis, NULL, 0, READ_CMD); +} + +int mv_sata_spin_down(int dev) +{ + struct sata_fis_h2d cfis; + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[dev].priv; + + if (priv->link == 0) { + debug("No device on port: %d\n", dev); + return 1; + } + + memset(&cfis, 0, sizeof(struct sata_fis_h2d)); + + cfis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis.command = ATA_CMD_STANDBY; + + return mv_ata_exec_ata_cmd_nondma(dev, &cfis, NULL, 0, READ_CMD); +} + +int mv_sata_spin_up(int dev) +{ + struct sata_fis_h2d cfis; + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[dev].priv; + + if (priv->link == 0) { + debug("No device on port: %d\n", dev); + return 1; + } + + memset(&cfis, 0, sizeof(struct sata_fis_h2d)); + + cfis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + cfis.command = ATA_CMD_IDLE; + + return mv_ata_exec_ata_cmd_nondma(dev, &cfis, NULL, 0, READ_CMD); +} + +ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer) +{ + return ata_low_level_rw(dev, blknr, blkcnt, buffer, READ_CMD); +} + +ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer) +{ + return ata_low_level_rw(dev, blknr, blkcnt, (void *)buffer, WRITE_CMD); +} + +/* + * Initialize SATA memory windows + */ +static void mvsata_ide_conf_mbus_windows(void) +{ + const struct mbus_dram_target_info *dram; + int i; + + dram = mvebu_mbus_dram_info(); + + /* Disable windows, Set Size/Base to 0 */ + for (i = 0; i < 4; i++) { + writel(0, MVSATA_WIN_CONTROL(i)); + writel(0, MVSATA_WIN_BASE(i)); + } + + for (i = 0; i < dram->num_cs; i++) { + const struct mbus_dram_window *cs = dram->cs + i; + writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) | + (dram->mbus_dram_target_id << 4) | 1, + MVSATA_WIN_CONTROL(i)); + writel(cs->base & 0xffff0000, MVSATA_WIN_BASE(i)); + } +} + +int init_sata(int dev) +{ + struct mv_priv *priv; + + debug("Initialize sata dev: %d\n", dev); + + if (dev < 0 || dev >= CONFIG_SYS_SATA_MAX_DEVICE) { + printf("Invalid sata device %d\n", dev); + return -1; + } + + priv = (struct mv_priv *)malloc(sizeof(struct mv_priv)); + if (!priv) { + printf("Failed to allocate memory for private sata data\n"); + return -ENOMEM; + } + + memset((void *)priv, 0, sizeof(struct mv_priv)); + + /* Allocate and align request buffer */ + priv->crqb_alloc = malloc(sizeof(struct crqb) * REQUEST_QUEUE_SIZE + + CRQB_ALIGN); + if (!priv->crqb_alloc) { + printf("Unable to allocate memory for request queue\n"); + return -ENOMEM; + } + memset(priv->crqb_alloc, 0, + sizeof(struct crqb) * REQUEST_QUEUE_SIZE + CRQB_ALIGN); + priv->request = (struct crqb *)(((u32) priv->crqb_alloc + CRQB_ALIGN) & + ~(CRQB_ALIGN - 1)); + + /* Allocate and align response buffer */ + priv->crpb_alloc = malloc(sizeof(struct crpb) * REQUEST_QUEUE_SIZE + + CRPB_ALIGN); + if (!priv->crpb_alloc) { + printf("Unable to allocate memory for response queue\n"); + return -ENOMEM; + } + memset(priv->crpb_alloc, 0, + sizeof(struct crpb) * REQUEST_QUEUE_SIZE + CRPB_ALIGN); + priv->response = (struct crpb *)(((u32) priv->crpb_alloc + CRPB_ALIGN) & + ~(CRPB_ALIGN - 1)); + + sata_dev_desc[dev].priv = (void *)priv; + + sprintf(priv->name, "SATA%d", dev); + + priv->regbase = dev == 0 ? SATA0_BASE : SATA1_BASE; + + if (!hw_init) { + debug("Initialize sata hw\n"); + hw_init = 1; + mv_reset_one_hc(); + mvsata_ide_conf_mbus_windows(); + } + + mv_reset_port(dev); + + if (probe_port(dev)) { + priv->link = 0; + return -ENODEV; + } + priv->link = 1; + + return 0; +} + +int reset_sata(int dev) +{ + return 0; +} + +int scan_sata(int port) +{ + unsigned char serial[ATA_ID_SERNO_LEN + 1]; + unsigned char firmware[ATA_ID_FW_REV_LEN + 1]; + unsigned char product[ATA_ID_PROD_LEN + 1]; + u64 n_sectors; + u16 *id; + struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv; + + if (!priv->link) + return -ENODEV; + + id = (u16 *)malloc(ATA_ID_WORDS * 2); + if (!id) { + printf("Failed to malloc id data\n"); + return -ENOMEM; + } + + mv_sata_identify(port, id); + ata_swap_buf_le16(id, ATA_ID_WORDS); +#ifdef DEBUG + ata_dump_id(id); +#endif + + /* Serial number */ + ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial)); + memcpy(sata_dev_desc[port].product, serial, sizeof(serial)); + + /* Firmware version */ + ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware)); + memcpy(sata_dev_desc[port].revision, firmware, sizeof(firmware)); + + /* Product model */ + ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product)); + memcpy(sata_dev_desc[port].vendor, product, sizeof(product)); + + /* Total sectors */ + n_sectors = ata_id_n_sectors(id); + sata_dev_desc[port].lba = n_sectors; + + /* Check if support LBA48 */ + if (ata_id_has_lba48(id)) { + sata_dev_desc[port].lba48 = 1; + debug("Device support LBA48\n"); + } + + /* Get the NCQ queue depth from device */ + priv->queue_depth = ata_id_queue_depth(id); + + /* Get the xfer mode from device */ + mv_sata_xfer_mode(port, id); + + /* Set the xfer mode to highest speed */ + mv_sata_set_features(port); + + /* Start up */ + mv_start_edma_engine(port); + + return 0; +} diff --git a/drivers/ata/sata_sandbox.c b/drivers/ata/sata_sandbox.c new file mode 100644 index 0000000000..bd967d290c --- /dev/null +++ b/drivers/ata/sata_sandbox.c @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2015 Google, Inc + * Written by Simon Glass + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include + +int init_sata(int dev) +{ + return 0; +} + +int reset_sata(int dev) +{ + return 0; +} + +int scan_sata(int dev) +{ + return 0; +} + +ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer) +{ + return 0; +} + +ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer) +{ + return 0; +} diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c new file mode 100644 index 0000000000..daff7d4ab5 --- /dev/null +++ b/drivers/ata/sata_sil.c @@ -0,0 +1,715 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Author: Tang Yuantian + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "sata_sil.h" + +/* Convert sectorsize to wordsize */ +#define ATA_SECTOR_WORDS (ATA_SECT_SIZE/2) +#define virt_to_bus(devno, v) pci_virt_to_mem(devno, (void *) (v)) + +static struct sata_info sata_info; + +static struct pci_device_id supported[] = { + {PCI_VENDOR_ID_SILICONIMAGE, PCI_DEVICE_ID_SIL3131}, + {PCI_VENDOR_ID_SILICONIMAGE, PCI_DEVICE_ID_SIL3132}, + {PCI_VENDOR_ID_SILICONIMAGE, PCI_DEVICE_ID_SIL3124}, + {} +}; + +static void sil_sata_dump_fis(struct sata_fis_d2h *s) +{ + printf("Status FIS dump:\n"); + printf("fis_type: %02x\n", s->fis_type); + printf("pm_port_i: %02x\n", s->pm_port_i); + printf("status: %02x\n", s->status); + printf("error: %02x\n", s->error); + printf("lba_low: %02x\n", s->lba_low); + printf("lba_mid: %02x\n", s->lba_mid); + printf("lba_high: %02x\n", s->lba_high); + printf("device: %02x\n", s->device); + printf("lba_low_exp: %02x\n", s->lba_low_exp); + printf("lba_mid_exp: %02x\n", s->lba_mid_exp); + printf("lba_high_exp: %02x\n", s->lba_high_exp); + printf("res1: %02x\n", s->res1); + printf("sector_count: %02x\n", s->sector_count); + printf("sector_count_exp: %02x\n", s->sector_count_exp); +} + +static const char *sata_spd_string(unsigned int speed) +{ + static const char * const spd_str[] = { + "1.5 Gbps", + "3.0 Gbps", + "6.0 Gbps", + }; + + if ((speed - 1) > 2) + return ""; + + return spd_str[speed - 1]; +} + +static u32 ata_wait_register(void *reg, u32 mask, + u32 val, int timeout_msec) +{ + u32 tmp; + + tmp = readl(reg); + while ((tmp & mask) == val && timeout_msec > 0) { + mdelay(1); + timeout_msec--; + tmp = readl(reg); + } + + return tmp; +} + +static void sil_config_port(void *port) +{ + /* configure IRQ WoC */ + writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); + + /* zero error counters. */ + writew(0x8000, port + PORT_DECODE_ERR_THRESH); + writew(0x8000, port + PORT_CRC_ERR_THRESH); + writew(0x8000, port + PORT_HSHK_ERR_THRESH); + writew(0x0000, port + PORT_DECODE_ERR_CNT); + writew(0x0000, port + PORT_CRC_ERR_CNT); + writew(0x0000, port + PORT_HSHK_ERR_CNT); + + /* always use 64bit activation */ + writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR); + + /* clear port multiplier enable and resume bits */ + writel(PORT_CS_PMP_EN | PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR); +} + +static int sil_init_port(void *port) +{ + u32 tmp; + + writel(PORT_CS_INIT, port + PORT_CTRL_STAT); + ata_wait_register(port + PORT_CTRL_STAT, + PORT_CS_INIT, PORT_CS_INIT, 100); + tmp = ata_wait_register(port + PORT_CTRL_STAT, + PORT_CS_RDY, 0, 100); + + if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) + return 1; + + return 0; +} + +static void sil_read_fis(int dev, int tag, struct sata_fis_d2h *fis) +{ + struct sil_sata *sata = sata_dev_desc[dev].priv; + void *port = sata->port; + struct sil_prb *prb; + int i; + u32 *src, *dst; + + prb = port + PORT_LRAM + tag * PORT_LRAM_SLOT_SZ; + src = (u32 *)&prb->fis; + dst = (u32 *)fis; + for (i = 0; i < sizeof(struct sata_fis_h2d); i += 4) + *dst++ = readl(src++); +} + +static int sil_exec_cmd(int dev, struct sil_cmd_block *pcmd, int tag) +{ + struct sil_sata *sata = sata_dev_desc[dev].priv; + void *port = sata->port; + u64 paddr = virt_to_bus(sata->devno, pcmd); + u32 irq_mask, irq_stat; + int rc; + + writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR); + + /* better to add momery barrior here */ + writel((u32)paddr, port + PORT_CMD_ACTIVATE + tag * 8); + writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + tag * 8 + 4); + + irq_mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT; + irq_stat = ata_wait_register(port + PORT_IRQ_STAT, irq_mask, + 0, 10000); + + /* clear IRQs */ + writel(irq_mask, port + PORT_IRQ_STAT); + irq_stat >>= PORT_IRQ_RAW_SHIFT; + + if (irq_stat & PORT_IRQ_COMPLETE) + rc = 0; + else { + /* force port into known state */ + sil_init_port(port); + if (irq_stat & PORT_IRQ_ERROR) + rc = 1; /* error */ + else + rc = 2; /* busy */ + } + + return rc; +} + +static int sil_cmd_set_feature(int dev) +{ + struct sil_sata *sata = sata_dev_desc[dev].priv; + struct sil_cmd_block cmdb, *pcmd = &cmdb; + struct sata_fis_d2h fis; + u8 udma_cap; + int ret; + + memset((void *)&cmdb, 0, sizeof(struct sil_cmd_block)); + pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + pcmd->prb.fis.pm_port_c = (1 << 7); + pcmd->prb.fis.command = ATA_CMD_SET_FEATURES; + pcmd->prb.fis.features = SETFEATURES_XFER; + + /* First check the device capablity */ + udma_cap = (u8)(sata->udma & 0xff); + debug("udma_cap %02x\n", udma_cap); + + if (udma_cap == ATA_UDMA6) + pcmd->prb.fis.sector_count = XFER_UDMA_6; + if (udma_cap == ATA_UDMA5) + pcmd->prb.fis.sector_count = XFER_UDMA_5; + if (udma_cap == ATA_UDMA4) + pcmd->prb.fis.sector_count = XFER_UDMA_4; + if (udma_cap == ATA_UDMA3) + pcmd->prb.fis.sector_count = XFER_UDMA_3; + + ret = sil_exec_cmd(dev, pcmd, 0); + if (ret) { + sil_read_fis(dev, 0, &fis); + printf("Err: exe cmd(0x%x).\n", + readl(sata->port + PORT_SERROR)); + sil_sata_dump_fis(&fis); + return 1; + } + + return 0; +} + +static int sil_cmd_identify_device(int dev, u16 *id) +{ + struct sil_sata *sata = sata_dev_desc[dev].priv; + struct sil_cmd_block cmdb, *pcmd = &cmdb; + struct sata_fis_d2h fis; + int ret; + + memset((void *)&cmdb, 0, sizeof(struct sil_cmd_block)); + pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_PROTOCOL); + pcmd->prb.prot = cpu_to_le16(PRB_PROT_READ); + pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + pcmd->prb.fis.pm_port_c = (1 << 7); + pcmd->prb.fis.command = ATA_CMD_ID_ATA; + pcmd->sge.addr = cpu_to_le64(virt_to_bus(sata->devno, id)); + pcmd->sge.cnt = cpu_to_le32(sizeof(id[0]) * ATA_ID_WORDS); + pcmd->sge.flags = cpu_to_le32(SGE_TRM); + + ret = sil_exec_cmd(dev, pcmd, 0); + if (ret) { + sil_read_fis(dev, 0, &fis); + printf("Err: id cmd(0x%x).\n", readl(sata->port + PORT_SERROR)); + sil_sata_dump_fis(&fis); + return 1; + } + ata_swap_buf_le16(id, ATA_ID_WORDS); + + return 0; +} + +static int sil_cmd_soft_reset(int dev) +{ + struct sil_cmd_block cmdb, *pcmd = &cmdb; + struct sil_sata *sata = sata_dev_desc[dev].priv; + struct sata_fis_d2h fis; + void *port = sata->port; + int ret; + + /* put the port into known state */ + if (sil_init_port(port)) { + printf("SRST: port %d not ready\n", dev); + return 1; + } + + memset((void *)&cmdb, 0, sizeof(struct sil_cmd_block)); + + pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_SRST); + pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + pcmd->prb.fis.pm_port_c = 0xf; + + ret = sil_exec_cmd(dev, &cmdb, 0); + if (ret) { + sil_read_fis(dev, 0, &fis); + printf("SRST cmd error.\n"); + sil_sata_dump_fis(&fis); + return 1; + } + + return 0; +} + +static ulong sil_sata_rw_cmd(int dev, ulong start, ulong blkcnt, + u8 *buffer, int is_write) +{ + struct sil_sata *sata = sata_dev_desc[dev].priv; + struct sil_cmd_block cmdb, *pcmd = &cmdb; + struct sata_fis_d2h fis; + u64 block; + int ret; + + block = (u64)start; + memset(pcmd, 0, sizeof(struct sil_cmd_block)); + pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_PROTOCOL); + pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + pcmd->prb.fis.pm_port_c = (1 << 7); + if (is_write) { + pcmd->prb.fis.command = ATA_CMD_WRITE; + pcmd->prb.prot = cpu_to_le16(PRB_PROT_WRITE); + } else { + pcmd->prb.fis.command = ATA_CMD_READ; + pcmd->prb.prot = cpu_to_le16(PRB_PROT_READ); + } + + pcmd->prb.fis.device = ATA_LBA; + pcmd->prb.fis.device |= (block >> 24) & 0xf; + pcmd->prb.fis.lba_high = (block >> 16) & 0xff; + pcmd->prb.fis.lba_mid = (block >> 8) & 0xff; + pcmd->prb.fis.lba_low = block & 0xff; + pcmd->prb.fis.sector_count = (u8)blkcnt & 0xff; + + pcmd->sge.addr = cpu_to_le64(virt_to_bus(sata->devno, buffer)); + pcmd->sge.cnt = cpu_to_le32(blkcnt * ATA_SECT_SIZE); + pcmd->sge.flags = cpu_to_le32(SGE_TRM); + + ret = sil_exec_cmd(dev, pcmd, 0); + if (ret) { + sil_read_fis(dev, 0, &fis); + printf("Err: rw cmd(0x%08x).\n", + readl(sata->port + PORT_SERROR)); + sil_sata_dump_fis(&fis); + return 1; + } + + return blkcnt; +} + +static ulong sil_sata_rw_cmd_ext(int dev, ulong start, ulong blkcnt, + u8 *buffer, int is_write) +{ + struct sil_sata *sata = sata_dev_desc[dev].priv; + struct sil_cmd_block cmdb, *pcmd = &cmdb; + struct sata_fis_d2h fis; + u64 block; + int ret; + + block = (u64)start; + memset(pcmd, 0, sizeof(struct sil_cmd_block)); + pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_PROTOCOL); + pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + pcmd->prb.fis.pm_port_c = (1 << 7); + if (is_write) { + pcmd->prb.fis.command = ATA_CMD_WRITE_EXT; + pcmd->prb.prot = cpu_to_le16(PRB_PROT_WRITE); + } else { + pcmd->prb.fis.command = ATA_CMD_READ_EXT; + pcmd->prb.prot = cpu_to_le16(PRB_PROT_READ); + } + + pcmd->prb.fis.lba_high_exp = (block >> 40) & 0xff; + pcmd->prb.fis.lba_mid_exp = (block >> 32) & 0xff; + pcmd->prb.fis.lba_low_exp = (block >> 24) & 0xff; + pcmd->prb.fis.lba_high = (block >> 16) & 0xff; + pcmd->prb.fis.lba_mid = (block >> 8) & 0xff; + pcmd->prb.fis.lba_low = block & 0xff; + pcmd->prb.fis.device = ATA_LBA; + pcmd->prb.fis.sector_count_exp = (blkcnt >> 8) & 0xff; + pcmd->prb.fis.sector_count = blkcnt & 0xff; + + pcmd->sge.addr = cpu_to_le64(virt_to_bus(sata->devno, buffer)); + pcmd->sge.cnt = cpu_to_le32(blkcnt * ATA_SECT_SIZE); + pcmd->sge.flags = cpu_to_le32(SGE_TRM); + + ret = sil_exec_cmd(dev, pcmd, 0); + if (ret) { + sil_read_fis(dev, 0, &fis); + printf("Err: rw ext cmd(0x%08x).\n", + readl(sata->port + PORT_SERROR)); + sil_sata_dump_fis(&fis); + return 1; + } + + return blkcnt; +} + +static ulong sil_sata_rw_lba28(int dev, ulong blknr, lbaint_t blkcnt, + const void *buffer, int is_write) +{ + ulong start, blks, max_blks; + u8 *addr; + + start = blknr; + blks = blkcnt; + addr = (u8 *)buffer; + + max_blks = ATA_MAX_SECTORS; + do { + if (blks > max_blks) { + sil_sata_rw_cmd(dev, start, max_blks, addr, is_write); + start += max_blks; + blks -= max_blks; + addr += ATA_SECT_SIZE * max_blks; + } else { + sil_sata_rw_cmd(dev, start, blks, addr, is_write); + start += blks; + blks = 0; + addr += ATA_SECT_SIZE * blks; + } + } while (blks != 0); + + return blkcnt; +} + +static ulong sil_sata_rw_lba48(int dev, ulong blknr, lbaint_t blkcnt, + const void *buffer, int is_write) +{ + ulong start, blks, max_blks; + u8 *addr; + + start = blknr; + blks = blkcnt; + addr = (u8 *)buffer; + + max_blks = ATA_MAX_SECTORS_LBA48; + do { + if (blks > max_blks) { + sil_sata_rw_cmd_ext(dev, start, max_blks, + addr, is_write); + start += max_blks; + blks -= max_blks; + addr += ATA_SECT_SIZE * max_blks; + } else { + sil_sata_rw_cmd_ext(dev, start, blks, + addr, is_write); + start += blks; + blks = 0; + addr += ATA_SECT_SIZE * blks; + } + } while (blks != 0); + + return blkcnt; +} + +static void sil_sata_cmd_flush_cache(int dev) +{ + struct sil_cmd_block cmdb, *pcmd = &cmdb; + + memset((void *)pcmd, 0, sizeof(struct sil_cmd_block)); + pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + pcmd->prb.fis.pm_port_c = (1 << 7); + pcmd->prb.fis.command = ATA_CMD_FLUSH; + + sil_exec_cmd(dev, pcmd, 0); +} + +static void sil_sata_cmd_flush_cache_ext(int dev) +{ + struct sil_cmd_block cmdb, *pcmd = &cmdb; + + memset((void *)pcmd, 0, sizeof(struct sil_cmd_block)); + pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D; + pcmd->prb.fis.pm_port_c = (1 << 7); + pcmd->prb.fis.command = ATA_CMD_FLUSH_EXT; + + sil_exec_cmd(dev, pcmd, 0); +} + +static void sil_sata_init_wcache(int dev, u16 *id) +{ + struct sil_sata *sata = sata_dev_desc[dev].priv; + + if (ata_id_has_wcache(id) && ata_id_wcache_enabled(id)) + sata->wcache = 1; + if (ata_id_has_flush(id)) + sata->flush = 1; + if (ata_id_has_flush_ext(id)) + sata->flush_ext = 1; +} + +static int sil_sata_get_wcache(int dev) +{ + struct sil_sata *sata = sata_dev_desc[dev].priv; + + return sata->wcache; +} + +static int sil_sata_get_flush(int dev) +{ + struct sil_sata *sata = sata_dev_desc[dev].priv; + + return sata->flush; +} + +static int sil_sata_get_flush_ext(int dev) +{ + struct sil_sata *sata = sata_dev_desc[dev].priv; + + return sata->flush_ext; +} + +/* + * SATA interface between low level driver and command layer + */ +ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer) +{ + struct sil_sata *sata = sata_dev_desc[dev].priv; + ulong rc; + + if (sata->lba48) + rc = sil_sata_rw_lba48(dev, blknr, blkcnt, buffer, READ_CMD); + else + rc = sil_sata_rw_lba28(dev, blknr, blkcnt, buffer, READ_CMD); + + return rc; +} + +/* + * SATA interface between low level driver and command layer + */ +ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer) +{ + struct sil_sata *sata = sata_dev_desc[dev].priv; + ulong rc; + + if (sata->lba48) { + rc = sil_sata_rw_lba48(dev, blknr, blkcnt, buffer, WRITE_CMD); + if (sil_sata_get_wcache(dev) && sil_sata_get_flush_ext(dev)) + sil_sata_cmd_flush_cache_ext(dev); + } else { + rc = sil_sata_rw_lba28(dev, blknr, blkcnt, buffer, WRITE_CMD); + if (sil_sata_get_wcache(dev) && sil_sata_get_flush(dev)) + sil_sata_cmd_flush_cache(dev); + } + + return rc; +} + +/* + * SATA interface between low level driver and command layer + */ +int init_sata(int dev) +{ + static int init_done, idx; + pci_dev_t devno; + u16 word; + + if (init_done == 1 && dev < sata_info.maxport) + return 0; + + init_done = 1; + + /* Find PCI device(s) */ + devno = pci_find_devices(supported, idx++); + if (devno == -1) + return 1; + + pci_read_config_word(devno, PCI_DEVICE_ID, &word); + + /* get the port count */ + word &= 0xf; + + sata_info.portbase = sata_info.maxport; + sata_info.maxport = sata_info.portbase + word; + sata_info.devno = devno; + + /* Read out all BARs */ + sata_info.iobase[0] = (ulong)pci_map_bar(devno, + PCI_BASE_ADDRESS_0, PCI_REGION_MEM); + sata_info.iobase[1] = (ulong)pci_map_bar(devno, + PCI_BASE_ADDRESS_2, PCI_REGION_MEM); + sata_info.iobase[2] = (ulong)pci_map_bar(devno, + PCI_BASE_ADDRESS_4, PCI_REGION_MEM); + + /* mask out the unused bits */ + sata_info.iobase[0] &= 0xffffff80; + sata_info.iobase[1] &= 0xfffffc00; + sata_info.iobase[2] &= 0xffffff80; + + /* Enable Bus Mastering and memory region */ + pci_write_config_word(devno, PCI_COMMAND, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + + /* Check if mem accesses and Bus Mastering are enabled. */ + pci_read_config_word(devno, PCI_COMMAND, &word); + if (!(word & PCI_COMMAND_MEMORY) || + (!(word & PCI_COMMAND_MASTER))) { + printf("Error: Can not enable MEM access or Bus Mastering.\n"); + debug("PCI command: %04x\n", word); + return 1; + } + + /* GPIO off */ + writel(0, (void *)(sata_info.iobase[0] + HOST_FLASH_CMD)); + /* clear global reset & mask interrupts during initialization */ + writel(0, (void *)(sata_info.iobase[0] + HOST_CTRL)); + + return 0; +} + +int reset_sata(int dev) +{ + return 0; +} + +/* + * SATA interface between low level driver and command layer + */ +int scan_sata(int dev) +{ + unsigned char serial[ATA_ID_SERNO_LEN + 1]; + unsigned char firmware[ATA_ID_FW_REV_LEN + 1]; + unsigned char product[ATA_ID_PROD_LEN + 1]; + struct sil_sata *sata; + void *port; + int cnt; + u16 *id; + u32 tmp; + + if (dev >= sata_info.maxport) { + printf("SATA#%d is not present\n", dev); + return 1; + } + + printf("SATA#%d\n", dev); + port = (void *)sata_info.iobase[1] + + PORT_REGS_SIZE * (dev - sata_info.portbase); + + /* Initial PHY setting */ + writel(0x20c, port + PORT_PHY_CFG); + + /* clear port RST */ + tmp = readl(port + PORT_CTRL_STAT); + if (tmp & PORT_CS_PORT_RST) { + writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); + tmp = ata_wait_register(port + PORT_CTRL_STAT, + PORT_CS_PORT_RST, PORT_CS_PORT_RST, 100); + if (tmp & PORT_CS_PORT_RST) + printf("Err: Failed to clear port RST\n"); + } + + /* Check if device is present */ + for (cnt = 0; cnt < 100; cnt++) { + tmp = readl(port + PORT_SSTATUS); + if ((tmp & 0xF) == 0x3) + break; + mdelay(1); + } + + tmp = readl(port + PORT_SSTATUS); + if ((tmp & 0xf) != 0x3) { + printf(" (No RDY)\n"); + return 1; + } + + /* Wait for port ready */ + tmp = ata_wait_register(port + PORT_CTRL_STAT, + PORT_CS_RDY, PORT_CS_RDY, 100); + if ((tmp & PORT_CS_RDY) != PORT_CS_RDY) { + printf("%d port not ready.\n", dev); + return 1; + } + + /* configure port */ + sil_config_port(port); + + /* Reset port */ + writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); + readl(port + PORT_CTRL_STAT); + tmp = ata_wait_register(port + PORT_CTRL_STAT, PORT_CS_DEV_RST, + PORT_CS_DEV_RST, 100); + if (tmp & PORT_CS_DEV_RST) { + printf("%d port reset failed.\n", dev); + return 1; + } + + sata = (struct sil_sata *)malloc(sizeof(struct sil_sata)); + if (!sata) { + printf("%d no memory.\n", dev); + return 1; + } + memset((void *)sata, 0, sizeof(struct sil_sata)); + + /* turn on port interrupt */ + tmp = readl((void *)(sata_info.iobase[0] + HOST_CTRL)); + tmp |= (1 << (dev - sata_info.portbase)); + writel(tmp, (void *)(sata_info.iobase[0] + HOST_CTRL)); + + /* Save the private struct to block device struct */ + sata_dev_desc[dev].priv = (void *)sata; + sata->port = port; + sata->devno = sata_info.devno; + sprintf(sata->name, "SATA#%d", dev); + sil_cmd_soft_reset(dev); + tmp = readl(port + PORT_SSTATUS); + tmp = (tmp >> 4) & 0xf; + printf(" (%s)\n", sata_spd_string(tmp)); + + id = (u16 *)malloc(ATA_ID_WORDS * 2); + if (!id) { + printf("Id malloc failed\n"); + free((void *)sata); + return 1; + } + sil_cmd_identify_device(dev, id); + +#ifdef CONFIG_LBA48 + /* Check if support LBA48 */ + if (ata_id_has_lba48(id)) { + sata_dev_desc[dev].lba48 = 1; + sata->lba48 = 1; + debug("Device supports LBA48\n"); + } else + debug("Device supports LBA28\n"); +#endif + + /* Serial number */ + ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial)); + memcpy(sata_dev_desc[dev].product, serial, sizeof(serial)); + + /* Firmware version */ + ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware)); + memcpy(sata_dev_desc[dev].revision, firmware, sizeof(firmware)); + + /* Product model */ + ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product)); + memcpy(sata_dev_desc[dev].vendor, product, sizeof(product)); + + /* Totoal sectors */ + sata_dev_desc[dev].lba = ata_id_n_sectors(id); + + sil_sata_init_wcache(dev, id); + sil_cmd_set_feature(dev); + +#ifdef DEBUG + sil_cmd_identify_device(dev, id); + ata_dump_id(id); +#endif + free((void *)id); + + return 0; +} diff --git a/drivers/ata/sata_sil.h b/drivers/ata/sata_sil.h new file mode 100644 index 0000000000..55954efdd6 --- /dev/null +++ b/drivers/ata/sata_sil.h @@ -0,0 +1,214 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Author: Tang Yuantian + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef SATA_SIL3132_H +#define SATA_SIL3132_H + +#define READ_CMD 0 +#define WRITE_CMD 1 + +/* + * SATA device driver struct for each dev + */ +struct sil_sata { + char name[12]; + void *port; /* the port base address */ + int lba48; + u16 pio; + u16 mwdma; + u16 udma; + pci_dev_t devno; + int wcache; + int flush; + int flush_ext; +}; + +/* sata info for each controller */ +struct sata_info { + ulong iobase[3]; + pci_dev_t devno; + int portbase; + int maxport; +}; + +/* + * Scatter gather entry (SGE),MUST 8 bytes aligned + */ +struct sil_sge { + __le64 addr; + __le32 cnt; + __le32 flags; +} __attribute__ ((aligned(8), packed)); + +/* + * Port request block, MUST 8 bytes aligned + */ +struct sil_prb { + __le16 ctrl; + __le16 prot; + __le32 rx_cnt; + struct sata_fis_h2d fis; +} __attribute__ ((aligned(8), packed)); + +struct sil_cmd_block { + struct sil_prb prb; + struct sil_sge sge; +}; + +enum { + HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */ + HOST_CTRL = 0x40, + HOST_IRQ_STAT = 0x44, + HOST_PHY_CFG = 0x48, + HOST_BIST_CTRL = 0x50, + HOST_BIST_PTRN = 0x54, + HOST_BIST_STAT = 0x58, + HOST_MEM_BIST_STAT = 0x5c, + HOST_FLASH_CMD = 0x70, + /* 8 bit regs */ + HOST_FLASH_DATA = 0x74, + HOST_TRANSITION_DETECT = 0x75, + HOST_GPIO_CTRL = 0x76, + HOST_I2C_ADDR = 0x78, /* 32 bit */ + HOST_I2C_DATA = 0x7c, + HOST_I2C_XFER_CNT = 0x7e, + HOST_I2C_CTRL = 0x7f, + + /* HOST_SLOT_STAT bits */ + HOST_SSTAT_ATTN = (1 << 31), + + /* HOST_CTRL bits */ + HOST_CTRL_M66EN = (1 << 16), /* M66EN PCI bus signal */ + HOST_CTRL_TRDY = (1 << 17), /* latched PCI TRDY */ + HOST_CTRL_STOP = (1 << 18), /* latched PCI STOP */ + HOST_CTRL_DEVSEL = (1 << 19), /* latched PCI DEVSEL */ + HOST_CTRL_REQ64 = (1 << 20), /* latched PCI REQ64 */ + HOST_CTRL_GLOBAL_RST = (1 << 31), /* global reset */ + + /* + * Port registers + * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2) + */ + PORT_REGS_SIZE = 0x2000, + + PORT_LRAM = 0x0000, /* 31 LRAM slots and PMP regs */ + PORT_LRAM_SLOT_SZ = 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */ + + PORT_PMP = 0x0f80, /* 8 bytes PMP * 16 (128 bytes) */ + PORT_PMP_STATUS = 0x0000, /* port device status offset */ + PORT_PMP_QACTIVE = 0x0004, /* port device QActive offset */ + PORT_PMP_SIZE = 0x0008, /* 8 bytes per PMP */ + + /* 32 bit regs */ + PORT_CTRL_STAT = 0x1000, /* write: ctrl-set, read: stat */ + PORT_CTRL_CLR = 0x1004, /* write: ctrl-clear */ + PORT_IRQ_STAT = 0x1008, /* high: status, low: interrupt */ + PORT_IRQ_ENABLE_SET = 0x1010, /* write: enable-set */ + PORT_IRQ_ENABLE_CLR = 0x1014, /* write: enable-clear */ + PORT_ACTIVATE_UPPER_ADDR = 0x101c, + PORT_EXEC_FIFO = 0x1020, /* command execution fifo */ + PORT_CMD_ERR = 0x1024, /* command error number */ + PORT_FIS_CFG = 0x1028, + PORT_FIFO_THRES = 0x102c, + + /* 16 bit regs */ + PORT_DECODE_ERR_CNT = 0x1040, + PORT_DECODE_ERR_THRESH = 0x1042, + PORT_CRC_ERR_CNT = 0x1044, + PORT_CRC_ERR_THRESH = 0x1046, + PORT_HSHK_ERR_CNT = 0x1048, + PORT_HSHK_ERR_THRESH = 0x104a, + + /* 32 bit regs */ + PORT_PHY_CFG = 0x1050, + PORT_SLOT_STAT = 0x1800, + PORT_CMD_ACTIVATE = 0x1c00, /* 64 bit cmd activate * 31 */ + PORT_CONTEXT = 0x1e04, + PORT_EXEC_DIAG = 0x1e00, /* 32bit exec diag * 16 */ + PORT_PSD_DIAG = 0x1e40, /* 32bit psd diag * 16 */ + PORT_SCONTROL = 0x1f00, + PORT_SSTATUS = 0x1f04, + PORT_SERROR = 0x1f08, + PORT_SACTIVE = 0x1f0c, + + /* PORT_CTRL_STAT bits */ + PORT_CS_PORT_RST = (1 << 0), /* port reset */ + PORT_CS_DEV_RST = (1 << 1), /* device reset */ + PORT_CS_INIT = (1 << 2), /* port initialize */ + PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */ + PORT_CS_CDB16 = (1 << 5), /* 0=12b cdb, 1=16b cdb */ + PORT_CS_PMP_RESUME = (1 << 6), /* PMP resume */ + PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */ + PORT_CS_PMP_EN = (1 << 13), /* port multiplier enable */ + PORT_CS_RDY = (1 << 31), /* port ready to accept commands */ + + /* PORT_IRQ_STAT/ENABLE_SET/CLR */ + /* bits[11:0] are masked */ + PORT_IRQ_COMPLETE = (1 << 0), /* command(s) completed */ + PORT_IRQ_ERROR = (1 << 1), /* command execution error */ + PORT_IRQ_PORTRDY_CHG = (1 << 2), /* port ready change */ + PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */ + PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */ + PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */ + PORT_IRQ_UNK_FIS = (1 << 6), /* unknown FIS received */ + PORT_IRQ_DEV_XCHG = (1 << 7), /* device exchanged */ + PORT_IRQ_8B10B = (1 << 8), /* 8b/10b decode error threshold */ + PORT_IRQ_CRC = (1 << 9), /* CRC error threshold */ + PORT_IRQ_HANDSHAKE = (1 << 10), /* handshake error threshold */ + PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */ + + DEF_PORT_IRQ = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | + PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG | + PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_NOTIFY, + + /* bits[27:16] are unmasked (raw) */ + PORT_IRQ_RAW_SHIFT = 16, + PORT_IRQ_MASKED_MASK = 0x7ff, + PORT_IRQ_RAW_MASK = (0x7ff << PORT_IRQ_RAW_SHIFT), + + /* ENABLE_SET/CLR specific, intr steering - 2 bit field */ + PORT_IRQ_STEER_SHIFT = 30, + PORT_IRQ_STEER_MASK = (3 << PORT_IRQ_STEER_SHIFT), + + /* PORT_CMD_ERR constants */ + PORT_CERR_DEV = 1, /* Error bit in D2H Register FIS */ + PORT_CERR_SDB = 2, /* Error bit in SDB FIS */ + PORT_CERR_DATA = 3, /* Error in data FIS not detected by dev */ + PORT_CERR_SEND = 4, /* Initial cmd FIS transmission failure */ + PORT_CERR_INCONSISTENT = 5, /* Protocol mismatch */ + PORT_CERR_DIRECTION = 6, /* Data direction mismatch */ + PORT_CERR_UNDERRUN = 7, /* Ran out of SGEs while writing */ + PORT_CERR_OVERRUN = 8, /* Ran out of SGEs while reading */ + + /* bits of PRB control field */ + PRB_CTRL_PROTOCOL = (1 << 0), /* override def. ATA protocol */ + PRB_CTRL_PACKET_READ = (1 << 4), /* PACKET cmd read */ + PRB_CTRL_PACKET_WRITE = (1 << 5), /* PACKET cmd write */ + PRB_CTRL_NIEN = (1 << 6), /* Mask completion irq */ + PRB_CTRL_SRST = (1 << 7), /* Soft reset request (ign BSY?) */ + + /* PRB protocol field */ + PRB_PROT_PACKET = (1 << 0), + PRB_PROT_TCQ = (1 << 1), + PRB_PROT_NCQ = (1 << 2), + PRB_PROT_READ = (1 << 3), + PRB_PROT_WRITE = (1 << 4), + PRB_PROT_TRANSPARENT = (1 << 5), + + /* + * Other constants + */ + SGE_TRM = (1 << 31), /* Last SGE in chain */ + SGE_LNK = (1 << 30), /* linked list + Points to SGT, not SGE */ + SGE_DRD = (1 << 29), /* discard data read (/dev/null) + data address ignored */ + + CMD_ERR = 0x21, +}; + +#endif diff --git a/drivers/ata/sata_sil3114.c b/drivers/ata/sata_sil3114.c new file mode 100644 index 0000000000..61ffb66a77 --- /dev/null +++ b/drivers/ata/sata_sil3114.c @@ -0,0 +1,835 @@ +/* + * Copyright (C) Excito Elektronik i Skåne AB, All rights reserved. + * Author: Tor Krill + * + * SPDX-License-Identifier: GPL-2.0+ + * + * This is a driver for Silicon Image sil3114 sata chip modelled on + * the ata_piix driver + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "sata_sil3114.h" + +/* Convert sectorsize to wordsize */ +#define ATA_SECTOR_WORDS (ATA_SECT_SIZE/2) + +/* Forwards */ +u8 sil3114_spin_up (int num); +u8 sil3114_spin_down (int num); +static int sata_bus_softreset (int num); +static void sata_identify (int num, int dev); +static u8 check_power_mode (int num); +static void sata_port (struct sata_ioports *ioport); +static void set_Feature_cmd (int num, int dev); +static u8 sata_busy_wait (struct sata_ioports *ioaddr, int bits, + unsigned int max, u8 usealtstatus); +static u8 sata_chk_status (struct sata_ioports *ioaddr, u8 usealtstatus); +static void msleep (int count); + +static u32 iobase[6] = { 0, 0, 0, 0, 0, 0}; /* PCI BAR registers for device */ + +static struct sata_port port[CONFIG_SYS_SATA_MAX_DEVICE]; + +static void output_data (struct sata_ioports *ioaddr, u16 * sect_buf, int words) +{ + while (words--) { + __raw_writew (*sect_buf++, (void *)ioaddr->data_addr); + } +} + +static int input_data (struct sata_ioports *ioaddr, u16 * sect_buf, int words) +{ + while (words--) { + *sect_buf++ = __raw_readw ((void *)ioaddr->data_addr); + } + return 0; +} + +static int sata_bus_softreset (int num) +{ + u8 status = 0; + + port[num].dev_mask = 1; + + port[num].ctl_reg = 0x08; /*Default value of control reg */ + writeb (port[num].ctl_reg, port[num].ioaddr.ctl_addr); + udelay (10); + writeb (port[num].ctl_reg | ATA_SRST, port[num].ioaddr.ctl_addr); + udelay (10); + writeb (port[num].ctl_reg, port[num].ioaddr.ctl_addr); + + /* spec mandates ">= 2ms" before checking status. + * We wait 150ms, because that was the magic delay used for + * ATAPI devices in Hale Landis's ATADRVR, for the period of time + * between when the ATA command register is written, and then + * status is checked. Because waiting for "a while" before + * checking status is fine, post SRST, we perform this magic + * delay here as well. + */ + msleep (150); + status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 300, 0); + while ((status & ATA_BUSY)) { + msleep (100); + status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 3, 0); + } + + if (status & ATA_BUSY) { + printf ("ata%u is slow to respond,plz be patient\n", num); + } + + while ((status & ATA_BUSY)) { + msleep (100); + status = sata_chk_status (&port[num].ioaddr, 0); + } + + if (status & ATA_BUSY) { + printf ("ata%u failed to respond : ", num); + printf ("bus reset failed\n"); + port[num].dev_mask = 0; + return 1; + } + return 0; +} + +static void sata_identify (int num, int dev) +{ + u8 cmd = 0, status = 0, devno = num; + u16 iobuf[ATA_SECTOR_WORDS]; + u64 n_sectors = 0; + + memset (iobuf, 0, sizeof (iobuf)); + + if (!(port[num].dev_mask & 0x01)) { + printf ("dev%d is not present on port#%d\n", dev, num); + return; + } + + debug ("port=%d dev=%d\n", num, dev); + + status = 0; + cmd = ATA_CMD_ID_ATA; /*Device Identify Command */ + writeb (cmd, port[num].ioaddr.command_addr); + readb (port[num].ioaddr.altstatus_addr); + udelay (10); + + status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 1000, 0); + if (status & ATA_ERR) { + printf ("\ndevice not responding\n"); + port[num].dev_mask &= ~0x01; + return; + } + + input_data (&port[num].ioaddr, iobuf, ATA_SECTOR_WORDS); + + ata_swap_buf_le16 (iobuf, ATA_SECTOR_WORDS); + + debug ("Specific config: %x\n", iobuf[2]); + + /* we require LBA and DMA support (bits 8 & 9 of word 49) */ + if (!ata_id_has_dma (iobuf) || !ata_id_has_lba (iobuf)) { + debug ("ata%u: no dma/lba\n", num); + } +#ifdef DEBUG + ata_dump_id (iobuf); +#endif + n_sectors = ata_id_n_sectors (iobuf); + + if (n_sectors == 0) { + port[num].dev_mask &= ~0x01; + return; + } + ata_id_c_string (iobuf, (unsigned char *)sata_dev_desc[devno].revision, + ATA_ID_FW_REV, sizeof (sata_dev_desc[devno].revision)); + ata_id_c_string (iobuf, (unsigned char *)sata_dev_desc[devno].vendor, + ATA_ID_PROD, sizeof (sata_dev_desc[devno].vendor)); + ata_id_c_string (iobuf, (unsigned char *)sata_dev_desc[devno].product, + ATA_ID_SERNO, sizeof (sata_dev_desc[devno].product)); + + /* TODO - atm we asume harddisk ie not removable */ + sata_dev_desc[devno].removable = 0; + + sata_dev_desc[devno].lba = (u32) n_sectors; + debug("lba=0x%lx\n", sata_dev_desc[devno].lba); + +#ifdef CONFIG_LBA48 + if (iobuf[83] & (1 << 10)) { + sata_dev_desc[devno].lba48 = 1; + } else { + sata_dev_desc[devno].lba48 = 0; + } +#endif + + /* assuming HD */ + sata_dev_desc[devno].type = DEV_TYPE_HARDDISK; + sata_dev_desc[devno].blksz = ATA_SECT_SIZE; + sata_dev_desc[devno].lun = 0; /* just to fill something in... */ +} + +static void set_Feature_cmd (int num, int dev) +{ + u8 status = 0; + + if (!(port[num].dev_mask & 0x01)) { + debug ("dev%d is not present on port#%d\n", dev, num); + return; + } + + writeb (SETFEATURES_XFER, port[num].ioaddr.feature_addr); + writeb (XFER_PIO_4, port[num].ioaddr.nsect_addr); + writeb (0, port[num].ioaddr.lbal_addr); + writeb (0, port[num].ioaddr.lbam_addr); + writeb (0, port[num].ioaddr.lbah_addr); + + writeb (ATA_DEVICE_OBS, port[num].ioaddr.device_addr); + writeb (ATA_CMD_SET_FEATURES, port[num].ioaddr.command_addr); + + udelay (50); + msleep (150); + + status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 5000, 0); + if ((status & (ATA_BUSY | ATA_ERR))) { + printf ("Error : status 0x%02x\n", status); + port[num].dev_mask &= ~0x01; + } +} + +u8 sil3114_spin_down (int num) +{ + u8 status = 0; + + debug ("Spin down disk\n"); + + if (!(port[num].dev_mask & 0x01)) { + debug ("Device ata%d is not present\n", num); + return 1; + } + + if ((status = check_power_mode (num)) == 0x00) { + debug ("Already in standby\n"); + return 0; + } + + if (status == 0x01) { + printf ("Failed to check power mode on ata%d\n", num); + return 1; + } + + if (!((status = sata_chk_status (&port[num].ioaddr, 0)) & ATA_DRDY)) { + printf ("Device ata%d not ready\n", num); + return 1; + } + + writeb (0x00, port[num].ioaddr.feature_addr); + + writeb (0x00, port[num].ioaddr.nsect_addr); + writeb (0x00, port[num].ioaddr.lbal_addr); + writeb (0x00, port[num].ioaddr.lbam_addr); + writeb (0x00, port[num].ioaddr.lbah_addr); + + writeb (ATA_DEVICE_OBS, port[num].ioaddr.device_addr); + writeb (ATA_CMD_STANDBY, port[num].ioaddr.command_addr); + + status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 30000, 0); + if ((status & (ATA_BUSY | ATA_ERR))) { + printf ("Error waiting for disk spin down: status 0x%02x\n", + status); + port[num].dev_mask &= ~0x01; + return 1; + } + return 0; +} + +u8 sil3114_spin_up (int num) +{ + u8 status = 0; + + debug ("Spin up disk\n"); + + if (!(port[num].dev_mask & 0x01)) { + debug ("Device ata%d is not present\n", num); + return 1; + } + + if ((status = check_power_mode (num)) != 0x00) { + if (status == 0x01) { + printf ("Failed to check power mode on ata%d\n", num); + return 1; + } else { + /* should be up and running already */ + return 0; + } + } + + if (!((status = sata_chk_status (&port[num].ioaddr, 0)) & ATA_DRDY)) { + printf ("Device ata%d not ready\n", num); + return 1; + } + + debug ("Stautus of device check: %d\n", status); + + writeb (0x00, port[num].ioaddr.feature_addr); + + writeb (0x00, port[num].ioaddr.nsect_addr); + writeb (0x00, port[num].ioaddr.lbal_addr); + writeb (0x00, port[num].ioaddr.lbam_addr); + writeb (0x00, port[num].ioaddr.lbah_addr); + + writeb (ATA_DEVICE_OBS, port[num].ioaddr.device_addr); + writeb (ATA_CMD_IDLE, port[num].ioaddr.command_addr); + + status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 30000, 0); + if ((status & (ATA_BUSY | ATA_ERR))) { + printf ("Error waiting for disk spin up: status 0x%02x\n", + status); + port[num].dev_mask &= ~0x01; + return 1; + } + + /* Wait for disk to enter Active state */ + do { + msleep (10); + status = check_power_mode (num); + } while ((status == 0x00) || (status == 0x80)); + + if (status == 0x01) { + printf ("Falied waiting for disk to spin up\n"); + return 1; + } + + return 0; +} + +/* Return value is not the usual here + * 0x00 - Device stand by + * 0x01 - Operation failed + * 0x80 - Device idle + * 0xff - Device active +*/ +static u8 check_power_mode (int num) +{ + u8 status = 0; + u8 res = 0; + if (!(port[num].dev_mask & 0x01)) { + debug ("Device ata%d is not present\n", num); + return 1; + } + + if (!(sata_chk_status (&port[num].ioaddr, 0) & ATA_DRDY)) { + printf ("Device ata%d not ready\n", num); + return 1; + } + + writeb (0, port[num].ioaddr.feature_addr); + writeb (0, port[num].ioaddr.nsect_addr); + writeb (0, port[num].ioaddr.lbal_addr); + writeb (0, port[num].ioaddr.lbam_addr); + writeb (0, port[num].ioaddr.lbah_addr); + + writeb (ATA_DEVICE_OBS, port[num].ioaddr.device_addr); + writeb (ATA_CMD_CHK_POWER, port[num].ioaddr.command_addr); + + status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 5000, 0); + if ((status & (ATA_BUSY | ATA_ERR))) { + printf + ("Error waiting for check power mode complete : status 0x%02x\n", + status); + port[num].dev_mask &= ~0x01; + return 1; + } + res = readb (port[num].ioaddr.nsect_addr); + debug ("Check powermode: %d\n", res); + return res; + +} + +static void sata_port (struct sata_ioports *ioport) +{ + ioport->data_addr = ioport->cmd_addr + ATA_REG_DATA; + ioport->error_addr = ioport->cmd_addr + ATA_REG_ERR; + ioport->feature_addr = ioport->cmd_addr + ATA_REG_FEATURE; + ioport->nsect_addr = ioport->cmd_addr + ATA_REG_NSECT; + ioport->lbal_addr = ioport->cmd_addr + ATA_REG_LBAL; + ioport->lbam_addr = ioport->cmd_addr + ATA_REG_LBAM; + ioport->lbah_addr = ioport->cmd_addr + ATA_REG_LBAH; + ioport->device_addr = ioport->cmd_addr + ATA_REG_DEVICE; + ioport->status_addr = ioport->cmd_addr + ATA_REG_STATUS; + ioport->command_addr = ioport->cmd_addr + ATA_REG_CMD; +} + +static u8 wait_for_irq (int num, unsigned int max) +{ + + u32 port = iobase[5]; + switch (num) { + case 0: + port += VND_TF_CNST_CH0; + break; + case 1: + port += VND_TF_CNST_CH1; + break; + case 2: + port += VND_TF_CNST_CH2; + break; + case 3: + port += VND_TF_CNST_CH3; + break; + default: + return 1; + } + + do { + if (readl (port) & VND_TF_CNST_INTST) { + break; + } + udelay (1000); + max--; + } while ((max > 0)); + + return (max == 0); +} + +static u8 sata_busy_wait (struct sata_ioports *ioaddr, int bits, + unsigned int max, u8 usealtstatus) +{ + u8 status; + + do { + if (!((status = sata_chk_status (ioaddr, usealtstatus)) & bits)) { + break; + } + udelay (1000); + max--; + } while ((status & bits) && (max > 0)); + + return status; +} + +static u8 sata_chk_status (struct sata_ioports *ioaddr, u8 usealtstatus) +{ + if (!usealtstatus) { + return readb (ioaddr->status_addr); + } else { + return readb (ioaddr->altstatus_addr); + } +} + +static void msleep (int count) +{ + int i; + + for (i = 0; i < count; i++) + udelay (1000); +} + +/* Read up to 255 sectors + * + * Returns sectors read +*/ +static u8 do_one_read (int device, ulong block, u8 blkcnt, u16 * buff, + uchar lba48) +{ + + u8 sr = 0; + u8 status; + u64 blknr = (u64) block; + + if (!(sata_chk_status (&port[device].ioaddr, 0) & ATA_DRDY)) { + printf ("Device ata%d not ready\n", device); + return 0; + } + + /* Set up transfer */ +#ifdef CONFIG_LBA48 + if (lba48) { + /* write high bits */ + writeb (0, port[device].ioaddr.nsect_addr); + writeb ((blknr >> 24) & 0xFF, port[device].ioaddr.lbal_addr); + writeb ((blknr >> 32) & 0xFF, port[device].ioaddr.lbam_addr); + writeb ((blknr >> 40) & 0xFF, port[device].ioaddr.lbah_addr); + } +#endif + writeb (blkcnt, port[device].ioaddr.nsect_addr); + writeb (((blknr) >> 0) & 0xFF, port[device].ioaddr.lbal_addr); + writeb ((blknr >> 8) & 0xFF, port[device].ioaddr.lbam_addr); + writeb ((blknr >> 16) & 0xFF, port[device].ioaddr.lbah_addr); + +#ifdef CONFIG_LBA48 + if (lba48) { + writeb (ATA_LBA, port[device].ioaddr.device_addr); + writeb (ATA_CMD_PIO_READ_EXT, port[device].ioaddr.command_addr); + } else +#endif + { + writeb (ATA_LBA | ((blknr >> 24) & 0xF), + port[device].ioaddr.device_addr); + writeb (ATA_CMD_PIO_READ, port[device].ioaddr.command_addr); + } + + status = sata_busy_wait (&port[device].ioaddr, ATA_BUSY, 10000, 1); + + if (status & ATA_BUSY) { + u8 err = 0; + + printf ("Device %d not responding status %d\n", device, status); + err = readb (port[device].ioaddr.error_addr); + printf ("Error reg = 0x%x\n", err); + + return (sr); + } + while (blkcnt--) { + + if (wait_for_irq (device, 500)) { + printf ("ata%u irq failed\n", device); + return sr; + } + + status = sata_chk_status (&port[device].ioaddr, 0); + if (status & ATA_ERR) { + printf ("ata%u error %d\n", device, + readb (port[device].ioaddr.error_addr)); + return sr; + } + /* Read one sector */ + input_data (&port[device].ioaddr, buff, ATA_SECTOR_WORDS); + buff += ATA_SECTOR_WORDS; + sr++; + + } + return sr; +} + +ulong sata_read (int device, ulong block, lbaint_t blkcnt, void *buff) +{ + ulong n = 0, sread; + u16 *buffer = (u16 *) buff; + u8 status = 0; + u64 blknr = (u64) block; + unsigned char lba48 = 0; + +#ifdef CONFIG_LBA48 + if (blknr > 0xfffffff) { + if (!sata_dev_desc[device].lba48) { + printf ("Drive doesn't support 48-bit addressing\n"); + return 0; + } + /* more than 28 bits used, use 48bit mode */ + lba48 = 1; + } +#endif + + while (blkcnt > 0) { + + if (blkcnt > 255) { + sread = 255; + } else { + sread = blkcnt; + } + + status = do_one_read (device, blknr, sread, buffer, lba48); + if (status != sread) { + printf ("Read failed\n"); + return n; + } + + blkcnt -= sread; + blknr += sread; + n += sread; + buffer += sread * ATA_SECTOR_WORDS; + } + return n; +} + +ulong sata_write (int device, ulong block, lbaint_t blkcnt, const void *buff) +{ + ulong n = 0; + u16 *buffer = (u16 *) buff; + unsigned char status = 0, num = 0; + u64 blknr = (u64) block; +#ifdef CONFIG_LBA48 + unsigned char lba48 = 0; + + if (blknr > 0xfffffff) { + if (!sata_dev_desc[device].lba48) { + printf ("Drive doesn't support 48-bit addressing\n"); + return 0; + } + /* more than 28 bits used, use 48bit mode */ + lba48 = 1; + } +#endif + /*Port Number */ + num = device; + + while (blkcnt-- > 0) { + status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 500, 0); + if (status & ATA_BUSY) { + printf ("ata%u failed to respond\n", port[num].port_no); + return n; + } +#ifdef CONFIG_LBA48 + if (lba48) { + /* write high bits */ + writeb (0, port[num].ioaddr.nsect_addr); + writeb ((blknr >> 24) & 0xFF, + port[num].ioaddr.lbal_addr); + writeb ((blknr >> 32) & 0xFF, + port[num].ioaddr.lbam_addr); + writeb ((blknr >> 40) & 0xFF, + port[num].ioaddr.lbah_addr); + } +#endif + writeb (1, port[num].ioaddr.nsect_addr); + writeb ((blknr >> 0) & 0xFF, port[num].ioaddr.lbal_addr); + writeb ((blknr >> 8) & 0xFF, port[num].ioaddr.lbam_addr); + writeb ((blknr >> 16) & 0xFF, port[num].ioaddr.lbah_addr); +#ifdef CONFIG_LBA48 + if (lba48) { + writeb (ATA_LBA, port[num].ioaddr.device_addr); + writeb (ATA_CMD_PIO_WRITE_EXT, port[num].ioaddr.command_addr); + } else +#endif + { + writeb (ATA_LBA | ((blknr >> 24) & 0xF), + port[num].ioaddr.device_addr); + writeb (ATA_CMD_PIO_WRITE, port[num].ioaddr.command_addr); + } + + msleep (50); + /*may take up to 4 sec */ + status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 4000, 0); + if ((status & (ATA_DRQ | ATA_BUSY | ATA_ERR)) != ATA_DRQ) { + printf ("Error no DRQ dev %d blk %ld: sts 0x%02x\n", + device, (ulong) blknr, status); + return (n); + } + + output_data (&port[num].ioaddr, buffer, ATA_SECTOR_WORDS); + readb (port[num].ioaddr.altstatus_addr); + udelay (50); + + ++n; + ++blknr; + buffer += ATA_SECTOR_WORDS; + } + return n; +} + +/* Driver implementation */ +static u8 sil_get_device_cache_line (pci_dev_t pdev) +{ + u8 cache_line = 0; + pci_read_config_byte (pdev, PCI_CACHE_LINE_SIZE, &cache_line); + return cache_line; +} + +int init_sata (int dev) +{ + static u8 init_done = 0; + static int res = 1; + pci_dev_t devno; + u8 cls = 0; + u16 cmd = 0; + u32 sconf = 0; + + if (init_done) { + return res; + } + + init_done = 1; + + if ((devno = pci_find_device (SIL_VEND_ID, SIL3114_DEVICE_ID, 0)) == -1) { + res = 1; + return res; + } + + /* Read out all BARs, even though we only use MMIO from BAR5 */ + pci_read_config_dword (devno, PCI_BASE_ADDRESS_0, &iobase[0]); + pci_read_config_dword (devno, PCI_BASE_ADDRESS_1, &iobase[1]); + pci_read_config_dword (devno, PCI_BASE_ADDRESS_2, &iobase[2]); + pci_read_config_dword (devno, PCI_BASE_ADDRESS_3, &iobase[3]); + pci_read_config_dword (devno, PCI_BASE_ADDRESS_4, &iobase[4]); + pci_read_config_dword (devno, PCI_BASE_ADDRESS_5, &iobase[5]); + + if ((iobase[0] == 0xFFFFFFFF) || (iobase[1] == 0xFFFFFFFF) || + (iobase[2] == 0xFFFFFFFF) || (iobase[3] == 0xFFFFFFFF) || + (iobase[4] == 0xFFFFFFFF) || (iobase[5] == 0xFFFFFFFF)) { + printf ("Error no base addr for SATA controller\n"); + res = 1; + return res; + } + + /* mask off unused bits */ + iobase[0] &= 0xfffffffc; + iobase[1] &= 0xfffffff8; + iobase[2] &= 0xfffffffc; + iobase[3] &= 0xfffffff8; + iobase[4] &= 0xfffffff0; + iobase[5] &= 0xfffffc00; + + /* from sata_sil in Linux kernel */ + cls = sil_get_device_cache_line (devno); + if (cls) { + cls >>= 3; + cls++; /* cls = (line_size/8)+1 */ + writel (cls << 8 | cls, iobase[5] + VND_FIFOCFG_CH0); + writel (cls << 8 | cls, iobase[5] + VND_FIFOCFG_CH1); + writel (cls << 8 | cls, iobase[5] + VND_FIFOCFG_CH2); + writel (cls << 8 | cls, iobase[5] + VND_FIFOCFG_CH3); + } else { + printf ("Cache line not set. Driver may not function\n"); + } + + /* Enable operation */ + pci_read_config_word (devno, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; + pci_write_config_word (devno, PCI_COMMAND, cmd); + + /* Disable interrupt usage */ + pci_read_config_dword (devno, VND_SYSCONFSTAT, &sconf); + sconf |= (VND_SYSCONFSTAT_CHN_0_INTBLOCK | VND_SYSCONFSTAT_CHN_1_INTBLOCK); + pci_write_config_dword (devno, VND_SYSCONFSTAT, sconf); + + res = 0; + return res; +} + +int reset_sata(int dev) +{ + return 0; +} + +/* Check if device is connected to port */ +int sata_bus_probe (int portno) +{ + u32 port = iobase[5]; + u32 val; + switch (portno) { + case 0: + port += VND_SSTATUS_CH0; + break; + case 1: + port += VND_SSTATUS_CH1; + break; + case 2: + port += VND_SSTATUS_CH2; + break; + case 3: + port += VND_SSTATUS_CH3; + break; + default: + return 0; + } + val = readl (port); + if ((val & SATA_DET_PRES) == SATA_DET_PRES) { + return 1; + } else { + return 0; + } +} + +int sata_phy_reset (int portno) +{ + u32 port = iobase[5]; + u32 val; + switch (portno) { + case 0: + port += VND_SCONTROL_CH0; + break; + case 1: + port += VND_SCONTROL_CH1; + break; + case 2: + port += VND_SCONTROL_CH2; + break; + case 3: + port += VND_SCONTROL_CH3; + break; + default: + return 0; + } + val = readl (port); + writel (val | SATA_SC_DET_RST, port); + msleep (150); + writel (val & ~SATA_SC_DET_RST, port); + return 0; +} + +int scan_sata (int dev) +{ + /* A bit brain dead, but the code has a legacy */ + switch (dev) { + case 0: + port[0].port_no = 0; + port[0].ioaddr.cmd_addr = iobase[5] + VND_TF0_CH0; + port[0].ioaddr.altstatus_addr = port[0].ioaddr.ctl_addr = + (iobase[5] + VND_TF2_CH0) | ATA_PCI_CTL_OFS; + port[0].ioaddr.bmdma_addr = iobase[5] + VND_BMDMA_CH0; + break; +#if (CONFIG_SYS_SATA_MAX_DEVICE >= 1) + case 1: + port[1].port_no = 0; + port[1].ioaddr.cmd_addr = iobase[5] + VND_TF0_CH1; + port[1].ioaddr.altstatus_addr = port[1].ioaddr.ctl_addr = + (iobase[5] + VND_TF2_CH1) | ATA_PCI_CTL_OFS; + port[1].ioaddr.bmdma_addr = iobase[5] + VND_BMDMA_CH1; + break; +#elif (CONFIG_SYS_SATA_MAX_DEVICE >= 2) + case 2: + port[2].port_no = 0; + port[2].ioaddr.cmd_addr = iobase[5] + VND_TF0_CH2; + port[2].ioaddr.altstatus_addr = port[2].ioaddr.ctl_addr = + (iobase[5] + VND_TF2_CH2) | ATA_PCI_CTL_OFS; + port[2].ioaddr.bmdma_addr = iobase[5] + VND_BMDMA_CH2; + break; +#elif (CONFIG_SYS_SATA_MAX_DEVICE >= 3) + case 3: + port[3].port_no = 0; + port[3].ioaddr.cmd_addr = iobase[5] + VND_TF0_CH3; + port[3].ioaddr.altstatus_addr = port[3].ioaddr.ctl_addr = + (iobase[5] + VND_TF2_CH3) | ATA_PCI_CTL_OFS; + port[3].ioaddr.bmdma_addr = iobase[5] + VND_BMDMA_CH3; + break; +#endif + default: + printf ("Tried to scan unknown port: ata%d\n", dev); + return 1; + } + + /* Initialize other registers */ + sata_port (&port[dev].ioaddr); + + /* Check for attached device */ + if (!sata_bus_probe (dev)) { + port[dev].port_state = 0; + debug ("SATA#%d port is not present\n", dev); + } else { + debug ("SATA#%d port is present\n", dev); + if (sata_bus_softreset (dev)) { + /* soft reset failed, try a hard one */ + sata_phy_reset (dev); + if (sata_bus_softreset (dev)) { + port[dev].port_state = 0; + } else { + port[dev].port_state = 1; + } + } else { + port[dev].port_state = 1; + } + } + if (port[dev].port_state == 1) { + /* Probe device and set xfer mode */ + sata_identify (dev, 0); + set_Feature_cmd (dev, 0); + } + + return 0; +} diff --git a/drivers/ata/sata_sil3114.h b/drivers/ata/sata_sil3114.h new file mode 100644 index 0000000000..091fca1d40 --- /dev/null +++ b/drivers/ata/sata_sil3114.h @@ -0,0 +1,134 @@ +/* + * Copyright (C) Excito Elektronik i Skåne AB, All rights reserved. + * Author: Tor Krill + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef SATA_SIL3114_H +#define SATA_SIL3114_H + +struct sata_ioports { + unsigned long cmd_addr; + unsigned long data_addr; + unsigned long error_addr; + unsigned long feature_addr; + unsigned long nsect_addr; + unsigned long lbal_addr; + unsigned long lbam_addr; + unsigned long lbah_addr; + unsigned long device_addr; + unsigned long status_addr; + unsigned long command_addr; + unsigned long altstatus_addr; + unsigned long ctl_addr; + unsigned long bmdma_addr; + unsigned long scr_addr; +}; + +struct sata_port { + unsigned char port_no; /* primary=0, secondary=1 */ + struct sata_ioports ioaddr; /* ATA cmd/ctl/dma reg blks */ + unsigned char ctl_reg; + unsigned char last_ctl; + unsigned char port_state; /* 1-port is available and */ + /* 0-port is not available */ + unsigned char dev_mask; +}; + +/* Missing ata defines */ +#define ATA_CMD_STANDBY 0xE2 +#define ATA_CMD_STANDBYNOW1 0xE0 +#define ATA_CMD_IDLE 0xE3 +#define ATA_CMD_IDLEIMMEDIATE 0xE1 + +/* Defines for SIL3114 chip */ + +/* PCI defines */ +#define SIL_VEND_ID 0x1095 +#define SIL3114_DEVICE_ID 0x3114 + +/* some vendor specific registers */ +#define VND_SYSCONFSTAT 0x88 /* System Configuration Status and Command */ +#define VND_SYSCONFSTAT_CHN_0_INTBLOCK (1<<22) +#define VND_SYSCONFSTAT_CHN_1_INTBLOCK (1<<23) +#define VND_SYSCONFSTAT_CHN_2_INTBLOCK (1<<24) +#define VND_SYSCONFSTAT_CHN_3_INTBLOCK (1<<25) + +/* internal registers mapped by BAR5 */ +/* SATA Control*/ +#define VND_SCONTROL_CH0 0x100 +#define VND_SCONTROL_CH1 0x180 +#define VND_SCONTROL_CH2 0x300 +#define VND_SCONTROL_CH3 0x380 + +#define SATA_SC_IPM_T2P (1<<16) +#define SATA_SC_IPM_T2S (2<<16) +#define SATA_SC_SPD_1_5 (1<<4) +#define SATA_SC_SPD_3_0 (2<<4) +#define SATA_SC_DET_RST (1) /* ATA Reset sequence */ +#define SATA_SC_DET_PDIS (4) /* PHY Disable */ + +/* SATA Status */ +#define VND_SSTATUS_CH0 0x104 +#define VND_SSTATUS_CH1 0x184 +#define VND_SSTATUS_CH2 0x304 +#define VND_SSTATUS_CH3 0x384 + +#define SATA_SS_IPM_ACTIVE (1<<8) +#define SATA_SS_IPM_PARTIAL (2<<8) +#define SATA_SS_IPM_SLUMBER (6<<8) +#define SATA_SS_SPD_1_5 (1<<4) +#define SATA_SS_SPD_3_0 (2<<4) +#define SATA_DET_P_NOPHY (1) /* Device presence but no PHY connection established */ +#define SATA_DET_PRES (3) /* Device presence and active PHY */ +#define SATA_DET_OFFLINE (4) /* Device offline or in loopback mode */ + +/* Task file registers in BAR5 mapping */ +#define VND_TF0_CH0 0x80 +#define VND_TF0_CH1 0xc0 +#define VND_TF0_CH2 0x280 +#define VND_TF0_CH3 0x2c0 +#define VND_TF1_CH0 0x88 +#define VND_TF1_CH1 0xc8 +#define VND_TF1_CH2 0x288 +#define VND_TF1_CH3 0x2c8 +#define VND_TF2_CH0 0x88 +#define VND_TF2_CH1 0xc8 +#define VND_TF2_CH2 0x288 +#define VND_TF2_CH3 0x2c8 + +#define VND_BMDMA_CH0 0x00 +#define VND_BMDMA_CH1 0x08 +#define VND_BMDMA_CH2 0x200 +#define VND_BMDMA_CH3 0x208 +#define VND_BMDMA2_CH0 0x10 +#define VND_BMDMA2_CH1 0x18 +#define VND_BMDMA2_CH2 0x210 +#define VND_BMDMA2_CH3 0x218 + +/* FIFO control */ +#define VND_FIFOCFG_CH0 0x40 +#define VND_FIFOCFG_CH1 0x44 +#define VND_FIFOCFG_CH2 0x240 +#define VND_FIFOCFG_CH3 0x244 + +/* Task File configuration and status */ +#define VND_TF_CNST_CH0 0xa0 +#define VND_TF_CNST_CH1 0xe0 +#define VND_TF_CNST_CH2 0x2a0 +#define VND_TF_CNST_CH3 0x2e0 + +#define VND_TF_CNST_BFCMD (1<<1) +#define VND_TF_CNST_CHNRST (1<<2) +#define VND_TF_CNST_VDMA (1<<10) +#define VND_TF_CNST_INTST (1<<11) +#define VND_TF_CNST_WDTO (1<<12) +#define VND_TF_CNST_WDEN (1<<13) +#define VND_TF_CNST_WDIEN (1<<14) + +/* for testing */ +#define VND_SSDR 0x04c /* System Software Data Register */ +#define VND_FMACS 0x050 /* Flash Memory Address control and status */ + +#endif -- cgit v1.2.3