From 14479a32538eb3ff0e9d6f4c0c9296c10b2caf1b Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Tue, 15 Nov 2022 15:46:23 +0100 Subject: FROMLIST: BACKPORT: rockchip: puma-rk3399: sync DTS with Linux kernel next-20221114 This synchronizes the Device Trees related to Puma RK3399 SoM with Linux kernel next-20221114 to include two important changes pertaining to eMMC and SD card instability. Cc: Quentin Schulz Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20221115-puma-dts-sync-v1-0-5699a835bab2@theobroma-systems.com [straightforward conflict resolution due to commit 57156aef3ee7 ("TSD: arm64: dts: rockchip: lower rk3399-puma-haikou SD controller clock frequency")] Signed-off-by: Quentin Schulz --- arch/arm/dts/rk3399-puma-haikou.dts | 3 ++- arch/arm/dts/rk3399-puma.dtsi | 32 +++++++++++++++++++++++++++++++- 2 files changed, 33 insertions(+), 2 deletions(-) diff --git a/arch/arm/dts/rk3399-puma-haikou.dts b/arch/arm/dts/rk3399-puma-haikou.dts index 1de351e378..115c14c0a3 100644 --- a/arch/arm/dts/rk3399-puma-haikou.dts +++ b/arch/arm/dts/rk3399-puma-haikou.dts @@ -49,7 +49,7 @@ sgtl5000_clk: sgtl5000-oscillator { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <24576000>; + clock-frequency = <24576000>; }; dc_12v: dc-12v { @@ -232,6 +232,7 @@ &usbdrd_dwc3_0 { dr_mode = "otg"; + extcon = <&extcon_usb3>; status = "okay"; }; diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi index fb67db4619..aa3e21bd6c 100644 --- a/arch/arm/dts/rk3399-puma.dtsi +++ b/arch/arm/dts/rk3399-puma.dtsi @@ -25,6 +25,13 @@ }; }; + extcon_usb3: extcon-usb3 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_id>; + }; + clkin_gmac: external-gmac-clock { compatible = "fixed-clock"; clock-frequency = <125000000>; @@ -55,7 +62,6 @@ vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; - enable-active-low; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en>; regulator-name = "vcc5v0_host"; @@ -71,6 +77,17 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + pwm-supply = <&vcc5v0_sys>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; }; &cpu_b0 { @@ -422,9 +439,22 @@ <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + usb3 { + usb3_id: usb3-id { + rockchip,pins = + <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &sdhci { + /* + * Signal integrity isn't great at 200MHz but 100MHz has proven stable + * enough. + */ + max-frequency = <100000000>; + bus-width = <8>; mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; -- cgit v1.2.3