summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-12-07sf: add entry for Winbond w25x20Jakob Unterwurzacher
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
2017-11-22rockchip: rk3399: init CPU B clockChristoph Muellner
Linux assumes working CPUs, which can be used to schedule tasks on. This patch sets the frequency of the B cluster to 600 MHz in order to fulfill the assumtion. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
2017-11-01[wip, squash] trigger usb reset workaround for usb1 only; still hard-codedPhilipp Tomsich
2017-11-01[wip: needs rewrite] xhci roothub FEAT_POWER changePhilipp Tomsich
2017-11-01rockchip: rk3399: init CPU clock when rkclk_init()Kever Yang
Init the CPU and its buses to speed up the boot time. Move rkclk_init() to a place after rk3399_configure_cpu has defined at the same time, or else there will be a warning. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-30net: fec_mxc: Change "error frame" message to debug levelFabio Estevam
As reported by Jonathan Gray: "After the recent changes to add SimpleNetworkProtocol to efi_loader when booting off mmc via an efi payload that doesn't use SimpleNetworkProtocol U-Boot's fec_mxc driver will now display various "error frame" messages. .... MMC Device 1 not found MMC Device 2 not found MMC Device 3 not found Scanning disks on sata... Found 6 disks reading efi/boot/bootarm.efi 67372 bytes read in 32 ms (2 MiB/s) ## Starting EFI application at 12000000 ... >> OpenBSD/armv7 BOOTARM 1.0 error frame: 0x8f57ec40 0x00003d74 error frame: 0x8f57ec40 0x00007079 error frame: 0x8f57ec40 0x00006964 error frame: 0x8f57ec40 0x00006f6f error frame: 0x8f57ec40 0x0000726f error frame: 0x8f57ec40 0x00002074 error frame: 0x8f57ec40 0x00006f6f" Heinrich Schuchardt explains: "A receive FIFO overrun can be expected if network packages are not processed. With the network patches we check if a package is available quite often." Move the "error frame" messages to debug level so that a clean output log can be seen. Reported-by: Jonathan Gray <jsg@jsg.id.au> Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-29Merge git://git.denx.de/u-boot-videoTom Rini
2017-10-29exynos: video: fix typo in DisplayPort driverDongjin Kim
Signed-off-by: Dongjin Kim <tobetter@gmail.com> CC: Simon Glass <sjg@chromium.org> CC: Minkyu Kang <mk7.kang@samsung.com>
2017-10-29video/da8xx-fb: Cache-align memory allocationsNiko Mauno
Resort to malloc_cache_aligned() rather than malloc() which also removes 'CACHE: Misaligned operation at range' warnings. Signed-off-by: Niko Mauno <niko.mauno@vaisala.com>
2017-10-27Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2017-10-27usb: host: Move CONFIG_XHCI_FSL to KconfigRan Wang
use Kconfig to select xhci accordingly. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-27armv8: ls1088aqds: Change phy mode to PHY_INTERFACE_MODE_RGMII_IDAshish Kumar
Since TX delay is now enabled only in PHY_INTERFACE_MODE_RGMII_ID PHY_INTERFACE_MODE_RGMII_TXID. These change where introduced in phy driver in commit 05b29aa0cb68 ("net: phy: realtek: fix enabling of the TX-delay for RTL8211F"). Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-27driver: fsl-mc: use calloc instead mallocPrabhakar Kushwaha
Memory allocated via malloc is not guaranteed to be zeroized. So explicitly use calloc instead of malloc. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-27i2c: fti2c010: remove unused/unmaintained driverMasahiro Yamada
CONFIG_SYS_I2C_FTI2C010 is not enabled by anyone. Commit 2852709676c8 ("dm: i2c: Add a note to I2C drivers which need conversion") prompted to convert this driver to DM before June 2017, but not converted yet. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Heiko Schocher <hs@denx.de>
2017-10-27i2c: adi_i2c: remove left-over Blackfin I2C driverMasahiro Yamada
This driver was used by Blackfin boards, but Blackfin support is gone. There is no user of this driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Heiko Schocher <hs@denx.de>
2017-10-27Merge git://git.denx.de/u-boot-x86Tom Rini
2017-10-27sunxi: video: add LCD support to DE2 driverVasily Khoruzhick
Extend DE2 driver with LCD support. Tested on Pinebook which is based on A64 and has ANX6345 eDP bridge with eDP panel connected to it. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> [agust: rebased v5 on u-boot-video/master] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-10-27sunxi: video: split out PLL configuration codeVasily Khoruzhick
It will be reused in new DM LCD driver. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2017-10-27spi: ich: Lock down controller settings if requiredBin Meng
Some Intel FSP (like Braswell) does SPI lock-down during the call to fsp_notify(INIT_PHASE_BOOT). But before SPI lock-down is done, it's bootloader's responsibility to configure the SPI controller's opcode registers properly otherwise SPI controller driver doesn't know how to communicate with the SPI flash device. Rather than passively doing the opcode configuration, let's add a simple DTS property "intel,spi-lock-down" and let the driver call the opcode configuration function if required by such FSP. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-26video: add anx6345 DM driverVasily Khoruzhick
This is a eDP bridge similar to ANX9804, it allows to connect eDP panels to the chips that can output only parallel signal Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> [agust: fixed most checkpatch errors/warnings] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-10-26video: anx9804: split out registers definitions into a separate headerVasily Khoruzhick
This header will be used in anx6345 driver Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> [agust: moved header to drivers/video] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-10-26dm: video: bridge: add operation to read EDIDVasily Khoruzhick
Add an operation to read EDID, since bridge may have ability to read EDID from the panel that is connected to it, for example LCD<->eDP bridge. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2017-10-26sunxi: setup simplefb for Allwinner DE2Icenowy Zheng
As the support of EFI boot on Allwinner H3 is broken, we still need to use simplefb to pass the framebuffer to Linux. Add code to setup simplefb for Allwinner DE2 driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-26video: add an option for video simplefb via DTIcenowy Zheng
Add an option to indicate that the video driver should setup a SimpleFB node that passes the video framebuffer initialized by U-Boot to the operating system kernel. Currently only the Allwinner DE driver uses this option, and the definition of this option in the sunxi-common.h config header is converted to an imply of this option from CONFIG_VIDEO_SUNXI. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-26video: sunxi: extract simplefb match code to a new fileIcenowy Zheng
As the DE2 simplefb setup code can also benefit from the simplefb match code, extract it to a new source file. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-25SPL: SPI: select SPL_SPI_FLASH_SUPPORT on SPL_SPI_SUNXIAndre Przywara
The Allwinner SPI flash SPL boot support is guarded by the SPL_SPI_SUNXI symbol. But despite its generic name, the actual only use case for this is to provide SPI flash support to the SPL, which requires CONFIG_SPL_SPI_FLASH_SUPPORT to be defined. Select this symbol from the SPL_SPI_SUNXI Kconfig definition. This avoids doing this explicitly in the defconfig, and fixes SPI booting on the Pine64 SoPine (and -LTS version) and the OrangePi Win board (both with SPI flash). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-23rtc: mc146818: Correct alarm message for day alarmBin Meng
RTC_CONFIG_D register contains the day within the month to generate an alarm, not the month. This corrects the printf to indicate it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-23simple-bus: remove DECLARE_GLOBAL_DATA_PTRMasahiro Yamada
No global pointer is used in this file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-23mtd: replace MTDDEBUG() with pr_debug()Masahiro Yamada
In old days, the MTD subsystem in Linux had debug facility like DEBUG(MTD_DEBUG_LEVEL1, ...). They were all replaced with pr_debug() until Linux 3.2. See Linux commit 289c05222172 ("mtd: replace DEBUG() with pr_debug()"). U-Boot still uses similar macros. Covert all of them for easier sync. Done with the help of Coccinelle. The semantic patch I used is as follows: // <smpl> @@ expression e1, e2; @@ -MTDDEBUG(e1, e2) +pr_debug(e2) @@ expression e1, e2; @@ -MTDDEBUG(e1, e2, +pr_debug(e2, ...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-20net: Add SMC911X driver to Kconfig, convertAdam Ford
We add the various SMC91XX symbols to drivers/net/Kconfig and then this converts the following to Kconfig: CONFIG_SMC911X CONFIG_SMC911X_BASE CONFIG_SMC911X_16_BIT CONFIG_SMC911X_32_BIT Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Apply to the rest of the tree, re-squash old and new patch] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-20Convert CONFIG_NAND_OMAP_GPMC et al and CONFIG_NAND_MXC to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_NAND_MXC CONFIG_NAND_OMAP_GPMC CONFIG_NAND_OMAP_GPMC_PREFETCH CONFIG_NAND_OMAP_ELM CONFIG_SPL_NAND_AM33XX_BCH CONFIG_SPL_NAND_SIMPLE CONFIG_SYS_NAND_BUSWIDTH_16BIT Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> [trini: Finish migration of CONFIG_SPL_NAND_SIMPLE, fix some build issues, add CONFIG_NAND_MXC so we can do CONFIG_SYS_NAND_BUSWIDTH_16BIT] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-18Merge git://git.denx.de/u-boot-i2cTom Rini
2017-10-18Merge git://git.denx.de/u-boot-spiTom Rini
2017-10-17i2c: stm32f7_i2c: fix usage of useless local variablePatrice Chotard
Remove useless local variable "s" and use directly function's parameter "output" Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-10-17i2c: stm32f7_i2c: fix data abortChristophe Kerello
As "v" is a local variable in stm32_i2c_choose_solution() "v" has to be copied into "s" to avoid data abort in stm32_i2c_compute_timing(). Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Patrick DELAUNAY <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-10-17i2c: remove DECLARE_GLOBAL_DATA_PTR from i2c-uclassMasahiro Yamada
No global pointer is used in this file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-10-16usbtty: fix typosHeinrich Schuchardt
Fix typos in USB tty driver. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-10-16Drop CONFIG_HAS_DATAFLASHTuomas Tynkkynen
Last user of this option went away in commit: fdc7718999 ("board: usb_a9263: Update to support DT and DM") Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-16spi: Drop CONFIG_ATMEL_DATAFLASH_SPITuomas Tynkkynen
Last user of this option went away in commit: fdc7718999 ("board: usb_a9263: Update to support DT and DM") Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Acked-by: Wenyou Yang <wenyou.yang@microchip.com>
2017-10-16mmc: stm32_sdmmc2: increase polling status register delayChristophe Kerello
MMC commands like MMC_CMD_ALL_SEND_CID or MMC_CMD_SEND_CSD can reach 500 us. This patch increases the polling status register delay to avoid a timeout on a command. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-10-16dm: clk: fix PWR_CR3 register's bit 2 namePatrice Chotard
Fix bit 2 name of PWR_CR3 register to match with the last STM32H7 reference manual available here : http://www.st.com/content/st_com/en/support/resources/ resource-selector.html?querycriteria=productId=SS1951$$ resourceCategory=technical_literature$$resourceType=reference_manual Update also comment about voltage scaling 1 values Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-10-16dm: clk: remove CLK() macro for clk_stm32h7Patrice Chotard
CLK() macro is a residue of a previously reworked patch, remove it. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-10-15clk: uniphier: add NAND controller clockMasahiro Yamada
This allows the NAND driver to enable clock and get its clock rate. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15mtd: nand: denali_dt: add clock supportMasahiro Yamada
Enable clock in the probe hook. The clock rate will be necessary when setup_data_interface hook is supported. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15reset: uniphier: fix the first argument passed to dev_err()Masahiro Yamada
priv->dev does not exist. Pass the correct pointer to udevice. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15clk: uniphier: add PXs3 clock dataMasahiro Yamada
Add basic clock data for Socionext's new SoC PXs3. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15clk: uniphier: rework for better clock tree structureMasahiro Yamada
U-Boot does not support fancy clock tree structures like the Linux common clock framework. Implement a simple clock tree model at the driver level. With this, the clock data will be simplified. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15i2c: uniphier-f: replace debug() with dev_dbg()Masahiro Yamada
Use dev_dbg() functions. It will be helpful to prefix log messages with the corresponding device name when the core framework is ready. While I am here, I renamed "dev", which was actually private data, into "priv" because dev->dev looks confusing. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15i2c: uniphier: replace debug() with dev_dbg()Masahiro Yamada
Use dev_dbg() functions. It will be helpful to prefix log messages with the corresponding device name when the core framework is ready. While I am here, I renamed "dev", which was actually private data, into "priv" because dev->dev looks confusing. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15usb: dwc3-uniphier: replace <common.h> with <linux/bitops.h>Masahiro Yamada
Including <common.h> pulls in a lot of bloat. What this driver needs is BIT(), so replace it with <linux/bitops.h> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Marek Vasut <marex@denx.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-30 18:22:09 +0000