summaryrefslogtreecommitdiff
path: root/drivers/ata
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/Kconfig62
-rw-r--r--drivers/ata/Makefile22
-rw-r--r--drivers/ata/ahci-uclass.c14
-rw-r--r--drivers/ata/ahci.c1094
-rw-r--r--drivers/ata/dwc_ahci.c101
-rw-r--r--drivers/ata/dwc_ahsata.c1018
-rw-r--r--drivers/ata/dwc_ahsata.h320
-rw-r--r--drivers/ata/fsl_sata.c854
-rw-r--r--drivers/ata/fsl_sata.h321
-rw-r--r--drivers/ata/libata.c144
-rw-r--r--drivers/ata/mvsata_ide.c199
-rw-r--r--drivers/ata/mxc_ata.c129
-rw-r--r--drivers/ata/sata.c117
-rw-r--r--drivers/ata/sata_ceva.c149
-rw-r--r--drivers/ata/sata_dwc.c2076
-rw-r--r--drivers/ata/sata_dwc.h465
-rw-r--r--drivers/ata/sata_mv.c1051
-rw-r--r--drivers/ata/sata_sandbox.c33
-rw-r--r--drivers/ata/sata_sil.c715
-rw-r--r--drivers/ata/sata_sil.h214
-rw-r--r--drivers/ata/sata_sil3114.c835
-rw-r--r--drivers/ata/sata_sil3114.h134
22 files changed, 10067 insertions, 0 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
new file mode 100644
index 0000000000..6427f1b94a
--- /dev/null
+++ b/drivers/ata/Kconfig
@@ -0,0 +1,62 @@
+config AHCI
+ bool "Support SATA controllers with driver model"
+ depends on DM
+ help
+ This enables a uclass for disk controllers in U-Boot. Various driver
+ types can use this, such as AHCI/SATA. It does not provide any standard
+ operations at present. The block device interface has not been converted
+ to driver model.
+
+config SATA
+ bool "Support SATA controllers"
+ help
+ This enables support for SATA (Serial Advanced Technology
+ Attachment), a serial bus standard for connecting to hard drives and
+ other storage devices.
+
+ SATA replaces PATA (originally just ATA), which stands for Parallel AT
+ Attachment, where AT refers to an IBM AT (Advanced Technology)
+ computer released in 1984.
+
+ See also CMD_SATA which provides command-line support.
+
+config SCSI
+ bool "Support SCSI controllers"
+ help
+ This enables support for SCSI (Small Computer System Interface),
+ a parallel interface widely used with storage peripherals such as
+ hard drives and optical drives. The SCSI standards define physical
+ interfaces as well as protocols for controlling devices and
+ tranferring data.
+
+config DM_SCSI
+ bool "Support SCSI controllers with driver model"
+ depends on BLK
+ help
+ This option enables the SCSI (Small Computer System Interface) uclass
+ which supports SCSI and SATA HDDs. For every device configuration
+ (IDs/LUNs) a block device is created with RAW read/write and
+ filesystem support.
+
+menu "SATA/SCSI device support"
+
+config SATA_CEVA
+ bool "Ceva Sata controller"
+ depends on AHCI
+ depends on DM_SCSI
+ help
+ This option enables Ceva Sata controller hard IP available on Xilinx
+ ZynqMP. Support up to 2 external devices. Complient with SATA 3.1 and
+ AHCI 1.3 specifications with hot-plug detect feature.
+
+
+config DWC_AHCI
+ bool "Enable Synopsys DWC AHCI driver support"
+ select SCSI_AHCI
+ select PHY
+ depends on DM_SCSI
+ help
+ Enable this driver to support Sata devices through
+ Synopsys DWC AHCI module.
+
+endmenu
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
new file mode 100644
index 0000000000..c48184c4c3
--- /dev/null
+++ b/drivers/ata/Makefile
@@ -0,0 +1,22 @@
+#
+# (C) Copyright 2000-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-$(CONFIG_DWC_AHCI) += dwc_ahci.o
+obj-$(CONFIG_AHCI) += ahci-uclass.o
+obj-$(CONFIG_SCSI_AHCI) += ahci.o
+obj-$(CONFIG_DWC_AHSATA) += dwc_ahsata.o
+obj-$(CONFIG_FSL_SATA) += fsl_sata.o
+obj-$(CONFIG_LIBATA) += libata.o
+obj-$(CONFIG_MVSATA_IDE) += mvsata_ide.o
+obj-$(CONFIG_MX51_PATA) += mxc_ata.o
+obj-$(CONFIG_SATA) += sata.o
+obj-$(CONFIG_SATA_CEVA) += sata_ceva.o
+obj-$(CONFIG_SATA_DWC) += sata_dwc.o
+obj-$(CONFIG_SATA_MV) += sata_mv.o
+obj-$(CONFIG_SATA_SIL3114) += sata_sil3114.o
+obj-$(CONFIG_SATA_SIL) += sata_sil.o
+obj-$(CONFIG_SANDBOX) += sata_sandbox.o
diff --git a/drivers/ata/ahci-uclass.c b/drivers/ata/ahci-uclass.c
new file mode 100644
index 0000000000..7b8c32699f
--- /dev/null
+++ b/drivers/ata/ahci-uclass.c
@@ -0,0 +1,14 @@
+/*
+ * Copyright (c) 2015 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+
+UCLASS_DRIVER(ahci) = {
+ .id = UCLASS_AHCI,
+ .name = "ahci",
+};
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
new file mode 100644
index 0000000000..f4744718a8
--- /dev/null
+++ b/drivers/ata/ahci.c
@@ -0,0 +1,1094 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006.
+ * Author: Jason Jin<Jason.jin@freescale.com>
+ * Zhang Wei<wei.zhang@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * with the reference on libata and ahci drvier in kernel
+ */
+#include <common.h>
+
+#include <command.h>
+#include <dm.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <linux/errno.h>
+#include <asm/io.h>
+#include <malloc.h>
+#include <memalign.h>
+#include <scsi.h>
+#include <libata.h>
+#include <linux/ctype.h>
+#include <ahci.h>
+
+static int ata_io_flush(u8 port);
+
+struct ahci_probe_ent *probe_ent = NULL;
+u16 *ataid[AHCI_MAX_PORTS];
+
+#define writel_with_flush(a,b) do { writel(a,b); readl(b); } while (0)
+
+/*
+ * Some controllers limit number of blocks they can read/write at once.
+ * Contemporary SSD devices work much faster if the read/write size is aligned
+ * to a power of 2. Let's set default to 128 and allowing to be overwritten if
+ * needed.
+ */
+#ifndef MAX_SATA_BLOCKS_READ_WRITE
+#define MAX_SATA_BLOCKS_READ_WRITE 0x80
+#endif
+
+/* Maximum timeouts for each event */
+#define WAIT_MS_SPINUP 20000
+#define WAIT_MS_DATAIO 10000
+#define WAIT_MS_FLUSH 5000
+#define WAIT_MS_LINKUP 200
+
+__weak void __iomem *ahci_port_base(void __iomem *base, u32 port)
+{
+ return base + 0x100 + (port * 0x80);
+}
+
+
+static void ahci_setup_port(struct ahci_ioports *port, void __iomem *base,
+ unsigned int port_idx)
+{
+ base = ahci_port_base(base, port_idx);
+
+ port->cmd_addr = base;
+ port->scr_addr = base + PORT_SCR;
+}
+
+
+#define msleep(a) udelay(a * 1000)
+
+static void ahci_dcache_flush_range(unsigned long begin, unsigned long len)
+{
+ const unsigned long start = begin;
+ const unsigned long end = start + len;
+
+ debug("%s: flush dcache: [%#lx, %#lx)\n", __func__, start, end);
+ flush_dcache_range(start, end);
+}
+
+/*
+ * SATA controller DMAs to physical RAM. Ensure data from the
+ * controller is invalidated from dcache; next access comes from
+ * physical RAM.
+ */
+static void ahci_dcache_invalidate_range(unsigned long begin, unsigned long len)
+{
+ const unsigned long start = begin;
+ const unsigned long end = start + len;
+
+ debug("%s: invalidate dcache: [%#lx, %#lx)\n", __func__, start, end);
+ invalidate_dcache_range(start, end);
+}
+
+/*
+ * Ensure data for SATA controller is flushed out of dcache and
+ * written to physical memory.
+ */
+static void ahci_dcache_flush_sata_cmd(struct ahci_ioports *pp)
+{
+ ahci_dcache_flush_range((unsigned long)pp->cmd_slot,
+ AHCI_PORT_PRIV_DMA_SZ);
+}
+
+static int waiting_for_cmd_completed(void __iomem *offset,
+ int timeout_msec,
+ u32 sign)
+{
+ int i;
+ u32 status;
+
+ for (i = 0; ((status = readl(offset)) & sign) && i < timeout_msec; i++)
+ msleep(1);
+
+ return (i < timeout_msec) ? 0 : -1;
+}
+
+int __weak ahci_link_up(struct ahci_probe_ent *probe_ent, u8 port)
+{
+ u32 tmp;
+ int j = 0;
+ void __iomem *port_mmio = probe_ent->port[port].port_mmio;
+
+ /*
+ * Bring up SATA link.
+ * SATA link bringup time is usually less than 1 ms; only very
+ * rarely has it taken between 1-2 ms. Never seen it above 2 ms.
+ */
+ while (j < WAIT_MS_LINKUP) {
+ tmp = readl(port_mmio + PORT_SCR_STAT);
+ tmp &= PORT_SCR_STAT_DET_MASK;
+ if (tmp == PORT_SCR_STAT_DET_PHYRDY)
+ return 0;
+ udelay(1000);
+ j++;
+ }
+ return 1;
+}
+
+#ifdef CONFIG_SUNXI_AHCI
+/* The sunxi AHCI controller requires this undocumented setup */
+static void sunxi_dma_init(void __iomem *port_mmio)
+{
+ clrsetbits_le32(port_mmio + PORT_P0DMACR, 0x0000ff00, 0x00004400);
+}
+#endif
+
+int ahci_reset(void __iomem *base)
+{
+ int i = 1000;
+ u32 __iomem *host_ctl_reg = base + HOST_CTL;
+ u32 tmp = readl(host_ctl_reg); /* global controller reset */
+
+ if ((tmp & HOST_RESET) == 0)
+ writel_with_flush(tmp | HOST_RESET, host_ctl_reg);
+
+ /*
+ * reset must complete within 1 second, or
+ * the hardware should be considered fried.
+ */
+ do {
+ udelay(1000);
+ tmp = readl(host_ctl_reg);
+ i--;
+ } while ((i > 0) && (tmp & HOST_RESET));
+
+ if (i == 0) {
+ printf("controller reset failed (0x%x)\n", tmp);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int ahci_host_init(struct ahci_probe_ent *probe_ent)
+{
+#if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI)
+# ifdef CONFIG_DM_PCI
+ struct udevice *dev = probe_ent->dev;
+ struct pci_child_platdata *pplat = dev_get_parent_platdata(dev);
+# else
+ pci_dev_t pdev = probe_ent->dev;
+ unsigned short vendor;
+# endif
+ u16 tmp16;
+#endif
+ void __iomem *mmio = probe_ent->mmio_base;
+ u32 tmp, cap_save, cmd;
+ int i, j, ret;
+ void __iomem *port_mmio;
+ u32 port_map;
+
+ debug("ahci_host_init: start\n");
+
+ cap_save = readl(mmio + HOST_CAP);
+ cap_save &= ((1 << 28) | (1 << 17));
+ cap_save |= (1 << 27); /* Staggered Spin-up. Not needed. */
+
+ ret = ahci_reset(probe_ent->mmio_base);
+ if (ret)
+ return ret;
+
+ writel_with_flush(HOST_AHCI_EN, mmio + HOST_CTL);
+ writel(cap_save, mmio + HOST_CAP);
+ writel_with_flush(0xf, mmio + HOST_PORTS_IMPL);
+
+#if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI)
+# ifdef CONFIG_DM_PCI
+ if (pplat->vendor == PCI_VENDOR_ID_INTEL) {
+ u16 tmp16;
+
+ dm_pci_read_config16(dev, 0x92, &tmp16);
+ dm_pci_write_config16(dev, 0x92, tmp16 | 0xf);
+ }
+# else
+ pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor);
+
+ if (vendor == PCI_VENDOR_ID_INTEL) {
+ u16 tmp16;
+ pci_read_config_word(pdev, 0x92, &tmp16);
+ tmp16 |= 0xf;
+ pci_write_config_word(pdev, 0x92, tmp16);
+ }
+# endif
+#endif
+ probe_ent->cap = readl(mmio + HOST_CAP);
+ probe_ent->port_map = readl(mmio + HOST_PORTS_IMPL);
+ port_map = probe_ent->port_map;
+ probe_ent->n_ports = (probe_ent->cap & 0x1f) + 1;
+
+ debug("cap 0x%x port_map 0x%x n_ports %d\n",
+ probe_ent->cap, probe_ent->port_map, probe_ent->n_ports);
+
+ if (probe_ent->n_ports > CONFIG_SYS_SCSI_MAX_SCSI_ID)
+ probe_ent->n_ports = CONFIG_SYS_SCSI_MAX_SCSI_ID;
+
+ for (i = 0; i < probe_ent->n_ports; i++) {
+ if (!(port_map & (1 << i)))
+ continue;
+ probe_ent->port[i].port_mmio = ahci_port_base(mmio, i);
+ port_mmio = (u8 *) probe_ent->port[i].port_mmio;
+ ahci_setup_port(&probe_ent->port[i], mmio, i);
+
+ /* make sure port is not active */
+ tmp = readl(port_mmio + PORT_CMD);
+ if (tmp & (PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
+ PORT_CMD_FIS_RX | PORT_CMD_START)) {
+ debug("Port %d is active. Deactivating.\n", i);
+ tmp &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
+ PORT_CMD_FIS_RX | PORT_CMD_START);
+ writel_with_flush(tmp, port_mmio + PORT_CMD);
+
+ /* spec says 500 msecs for each bit, so
+ * this is slightly incorrect.
+ */
+ msleep(500);
+ }
+
+#ifdef CONFIG_SUNXI_AHCI
+ sunxi_dma_init(port_mmio);
+#endif
+
+ /* Add the spinup command to whatever mode bits may
+ * already be on in the command register.
+ */
+ cmd = readl(port_mmio + PORT_CMD);
+ cmd |= PORT_CMD_SPIN_UP;
+ writel_with_flush(cmd, port_mmio + PORT_CMD);
+
+ /* Bring up SATA link. */
+ ret = ahci_link_up(probe_ent, i);
+ if (ret) {
+ printf("SATA link %d timeout.\n", i);
+ continue;
+ } else {
+ debug("SATA link ok.\n");
+ }
+
+ /* Clear error status */
+ tmp = readl(port_mmio + PORT_SCR_ERR);
+ if (tmp)
+ writel(tmp, port_mmio + PORT_SCR_ERR);
+
+ debug("Spinning up device on SATA port %d... ", i);
+
+ j = 0;
+ while (j < WAIT_MS_SPINUP) {
+ tmp = readl(port_mmio + PORT_TFDATA);
+ if (!(tmp & (ATA_BUSY | ATA_DRQ)))
+ break;
+ udelay(1000);
+ tmp = readl(port_mmio + PORT_SCR_STAT);
+ tmp &= PORT_SCR_STAT_DET_MASK;
+ if (tmp == PORT_SCR_STAT_DET_PHYRDY)
+ break;
+ j++;
+ }
+
+ tmp = readl(port_mmio + PORT_SCR_STAT) & PORT_SCR_STAT_DET_MASK;
+ if (tmp == PORT_SCR_STAT_DET_COMINIT) {
+ debug("SATA link %d down (COMINIT received), retrying...\n", i);
+ i--;
+ continue;
+ }
+
+ printf("Target spinup took %d ms.\n", j);
+ if (j == WAIT_MS_SPINUP)
+ debug("timeout.\n");
+ else
+ debug("ok.\n");
+
+ tmp = readl(port_mmio + PORT_SCR_ERR);
+ debug("PORT_SCR_ERR 0x%x\n", tmp);
+ writel(tmp, port_mmio + PORT_SCR_ERR);
+
+ /* ack any pending irq events for this port */
+ tmp = readl(port_mmio + PORT_IRQ_STAT);
+ debug("PORT_IRQ_STAT 0x%x\n", tmp);
+ if (tmp)
+ writel(tmp, port_mmio + PORT_IRQ_STAT);
+
+ writel(1 << i, mmio + HOST_IRQ_STAT);
+
+ /* register linkup ports */
+ tmp = readl(port_mmio + PORT_SCR_STAT);
+ debug("SATA port %d status: 0x%x\n", i, tmp);
+ if ((tmp & PORT_SCR_STAT_DET_MASK) == PORT_SCR_STAT_DET_PHYRDY)
+ probe_ent->link_port_map |= (0x01 << i);
+ }
+
+ tmp = readl(mmio + HOST_CTL);
+ debug("HOST_CTL 0x%x\n", tmp);
+ writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
+ tmp = readl(mmio + HOST_CTL);
+ debug("HOST_CTL 0x%x\n", tmp);
+#if !defined(CONFIG_DM_SCSI)
+#ifndef CONFIG_SCSI_AHCI_PLAT
+# ifdef CONFIG_DM_PCI
+ dm_pci_read_config16(dev, PCI_COMMAND, &tmp16);
+ tmp |= PCI_COMMAND_MASTER;
+ dm_pci_write_config16(dev, PCI_COMMAND, tmp16);
+# else
+ pci_read_config_word(pdev, PCI_COMMAND, &tmp16);
+ tmp |= PCI_COMMAND_MASTER;
+ pci_write_config_word(pdev, PCI_COMMAND, tmp16);
+# endif
+#endif
+#endif
+ return 0;
+}
+
+
+static void ahci_print_info(struct ahci_probe_ent *probe_ent)
+{
+#if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI)
+# if defined(CONFIG_DM_PCI)
+ struct udevice *dev = probe_ent->dev;
+# else
+ pci_dev_t pdev = probe_ent->dev;
+# endif
+ u16 cc;
+#endif
+ void __iomem *mmio = probe_ent->mmio_base;
+ u32 vers, cap, cap2, impl, speed;
+ const char *speed_s;
+ const char *scc_s;
+
+ vers = readl(mmio + HOST_VERSION);
+ cap = probe_ent->cap;
+ cap2 = readl(mmio + HOST_CAP2);
+ impl = probe_ent->port_map;
+
+ speed = (cap >> 20) & 0xf;
+ if (speed == 1)
+ speed_s = "1.5";
+ else if (speed == 2)
+ speed_s = "3";
+ else if (speed == 3)
+ speed_s = "6";
+ else
+ speed_s = "?";
+
+#if defined(CONFIG_SCSI_AHCI_PLAT) || defined(CONFIG_DM_SCSI)
+ scc_s = "SATA";
+#else
+# ifdef CONFIG_DM_PCI
+ dm_pci_read_config16(dev, 0x0a, &cc);
+# else
+ pci_read_config_word(pdev, 0x0a, &cc);
+# endif
+ if (cc == 0x0101)
+ scc_s = "IDE";
+ else if (cc == 0x0106)
+ scc_s = "SATA";
+ else if (cc == 0x0104)
+ scc_s = "RAID";
+ else
+ scc_s = "unknown";
+#endif
+ printf("AHCI %02x%02x.%02x%02x "
+ "%u slots %u ports %s Gbps 0x%x impl %s mode\n",
+ (vers >> 24) & 0xff,
+ (vers >> 16) & 0xff,
+ (vers >> 8) & 0xff,
+ vers & 0xff,
+ ((cap >> 8) & 0x1f) + 1, (cap & 0x1f) + 1, speed_s, impl, scc_s);
+
+ printf("flags: "
+ "%s%s%s%s%s%s%s"
+ "%s%s%s%s%s%s%s"
+ "%s%s%s%s%s%s\n",
+ cap & (1 << 31) ? "64bit " : "",
+ cap & (1 << 30) ? "ncq " : "",
+ cap & (1 << 28) ? "ilck " : "",
+ cap & (1 << 27) ? "stag " : "",
+ cap & (1 << 26) ? "pm " : "",
+ cap & (1 << 25) ? "led " : "",
+ cap & (1 << 24) ? "clo " : "",
+ cap & (1 << 19) ? "nz " : "",
+ cap & (1 << 18) ? "only " : "",
+ cap & (1 << 17) ? "pmp " : "",
+ cap & (1 << 16) ? "fbss " : "",
+ cap & (1 << 15) ? "pio " : "",
+ cap & (1 << 14) ? "slum " : "",
+ cap & (1 << 13) ? "part " : "",
+ cap & (1 << 7) ? "ccc " : "",
+ cap & (1 << 6) ? "ems " : "",
+ cap & (1 << 5) ? "sxs " : "",
+ cap2 & (1 << 2) ? "apst " : "",
+ cap2 & (1 << 1) ? "nvmp " : "",
+ cap2 & (1 << 0) ? "boh " : "");
+}
+
+#ifndef CONFIG_SCSI_AHCI_PLAT
+# if defined(CONFIG_DM_PCI) || defined(CONFIG_DM_SCSI)
+static int ahci_init_one(struct udevice *dev)
+# else
+static int ahci_init_one(pci_dev_t dev)
+# endif
+{
+#if !defined(CONFIG_DM_SCSI)
+ u16 vendor;
+#endif
+ int rc;
+
+ probe_ent = malloc(sizeof(struct ahci_probe_ent));
+ if (!probe_ent) {
+ printf("%s: No memory for probe_ent\n", __func__);
+ return -ENOMEM;
+ }
+
+ memset(probe_ent, 0, sizeof(struct ahci_probe_ent));
+ probe_ent->dev = dev;
+
+ probe_ent->host_flags = ATA_FLAG_SATA
+ | ATA_FLAG_NO_LEGACY
+ | ATA_FLAG_MMIO
+ | ATA_FLAG_PIO_DMA
+ | ATA_FLAG_NO_ATAPI;
+ probe_ent->pio_mask = 0x1f;
+ probe_ent->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */
+
+#if !defined(CONFIG_DM_SCSI)
+#ifdef CONFIG_DM_PCI
+ probe_ent->mmio_base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_5,
+ PCI_REGION_MEM);
+
+ /* Take from kernel:
+ * JMicron-specific fixup:
+ * make sure we're in AHCI mode
+ */
+ dm_pci_read_config16(dev, PCI_VENDOR_ID, &vendor);
+ if (vendor == 0x197b)
+ dm_pci_write_config8(dev, 0x41, 0xa1);
+#else
+ probe_ent->mmio_base = pci_map_bar(dev, PCI_BASE_ADDRESS_5,
+ PCI_REGION_MEM);
+
+ /* Take from kernel:
+ * JMicron-specific fixup:
+ * make sure we're in AHCI mode
+ */
+ pci_read_config_word(dev, PCI_VENDOR_ID, &vendor);
+ if (vendor == 0x197b)
+ pci_write_config_byte(dev, 0x41, 0xa1);
+#endif
+#else
+ struct scsi_platdata *plat = dev_get_platdata(dev);
+ probe_ent->mmio_base = (void *)plat->base;
+#endif
+
+ debug("ahci mmio_base=0x%p\n", probe_ent->mmio_base);
+ /* initialize adapter */
+ rc = ahci_host_init(probe_ent);
+ if (rc)
+ goto err_out;
+
+ ahci_print_info(probe_ent);
+
+ return 0;
+
+ err_out:
+ return rc;
+}
+#endif
+
+#define MAX_DATA_BYTE_COUNT (4*1024*1024)
+
+static int ahci_fill_sg(u8 port, unsigned char *buf, int buf_len)
+{
+ struct ahci_ioports *pp = &(probe_ent->port[port]);
+ struct ahci_sg *ahci_sg = pp->cmd_tbl_sg;
+ u32 sg_count;
+ int i;
+
+ sg_count = ((buf_len - 1) / MAX_DATA_BYTE_COUNT) + 1;
+ if (sg_count > AHCI_MAX_SG) {
+ printf("Error:Too much sg!\n");
+ return -1;
+ }
+
+ for (i = 0; i < sg_count; i++) {
+ ahci_sg->addr =
+ cpu_to_le32((unsigned long) buf + i * MAX_DATA_BYTE_COUNT);
+ ahci_sg->addr_hi = 0;
+ ahci_sg->flags_size = cpu_to_le32(0x3fffff &
+ (buf_len < MAX_DATA_BYTE_COUNT
+ ? (buf_len - 1)
+ : (MAX_DATA_BYTE_COUNT - 1)));
+ ahci_sg++;
+ buf_len -= MAX_DATA_BYTE_COUNT;
+ }
+
+ return sg_count;
+}
+
+
+static void ahci_fill_cmd_slot(struct ahci_ioports *pp, u32 opts)
+{
+ pp->cmd_slot->opts = cpu_to_le32(opts);
+ pp->cmd_slot->status = 0;
+ pp->cmd_slot->tbl_addr = cpu_to_le32((u32)pp->cmd_tbl & 0xffffffff);
+#ifdef CONFIG_PHYS_64BIT
+ pp->cmd_slot->tbl_addr_hi =
+ cpu_to_le32((u32)(((pp->cmd_tbl) >> 16) >> 16));
+#endif
+}
+
+static int wait_spinup(void __iomem *port_mmio)
+{
+ ulong start;
+ u32 tf_data;
+
+ start = get_timer(0);
+ do {
+ tf_data = readl(port_mmio + PORT_TFDATA);
+ if (!(tf_data & ATA_BUSY))
+ return 0;
+ } while (get_timer(start) < WAIT_MS_SPINUP);
+
+ return -ETIMEDOUT;
+}
+
+static int ahci_port_start(u8 port)
+{
+ struct ahci_ioports *pp = &(probe_ent->port[port]);
+ void __iomem *port_mmio = pp->port_mmio;
+ u32 port_status;
+ void __iomem *mem;
+
+ debug("Enter start port: %d\n", port);
+ port_status = readl(port_mmio + PORT_SCR_STAT);
+ debug("Port %d status: %x\n", port, port_status);
+ if ((port_status & 0xf) != 0x03) {
+ printf("No Link on this port!\n");
+ return -1;
+ }
+
+ mem = malloc(AHCI_PORT_PRIV_DMA_SZ + 2048);
+ if (!mem) {
+ free(pp);
+ printf("%s: No mem for table!\n", __func__);
+ return -ENOMEM;
+ }
+
+ /* Aligned to 2048-bytes */
+ mem = memalign(2048, AHCI_PORT_PRIV_DMA_SZ);
+ memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ);
+
+ /*
+ * First item in chunk of DMA memory: 32-slot command table,
+ * 32 bytes each in size
+ */
+ pp->cmd_slot =
+ (struct ahci_cmd_hdr *)(uintptr_t)virt_to_phys((void *)mem);
+ debug("cmd_slot = %p\n", pp->cmd_slot);
+ mem += (AHCI_CMD_SLOT_SZ + 224);
+
+ /*
+ * Second item: Received-FIS area
+ */
+ pp->rx_fis = virt_to_phys((void *)mem);
+ mem += AHCI_RX_FIS_SZ;
+
+ /*
+ * Third item: data area for storing a single command
+ * and its scatter-gather table
+ */
+ pp->cmd_tbl = virt_to_phys((void *)mem);
+ debug("cmd_tbl_dma = %lx\n", pp->cmd_tbl);
+
+ mem += AHCI_CMD_TBL_HDR;
+ pp->cmd_tbl_sg =
+ (struct ahci_sg *)(uintptr_t)virt_to_phys((void *)mem);
+
+ writel_with_flush((unsigned long)pp->cmd_slot,
+ port_mmio + PORT_LST_ADDR);
+
+ writel_with_flush(pp->rx_fis, port_mmio + PORT_FIS_ADDR);
+
+#ifdef CONFIG_SUNXI_AHCI
+ sunxi_dma_init(port_mmio);
+#endif
+
+ writel_with_flush(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX |
+ PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP |
+ PORT_CMD_START, port_mmio + PORT_CMD);
+
+ debug("Exit start port %d\n", port);
+
+ /*
+ * Make sure interface is not busy based on error and status
+ * information from task file data register before proceeding
+ */
+ return wait_spinup(port_mmio);
+}
+
+
+static int ahci_device_data_io(u8 port, u8 *fis, int fis_len, u8 *buf,
+ int buf_len, u8 is_write)
+{
+
+ struct ahci_ioports *pp = &(probe_ent->port[port]);
+ void __iomem *port_mmio = pp->port_mmio;
+ u32 opts;
+ u32 port_status;
+ int sg_count;
+
+ debug("Enter %s: for port %d\n", __func__, port);
+
+ if (port > probe_ent->n_ports) {
+ printf("Invalid port number %d\n", port);
+ return -1;
+ }
+
+ port_status = readl(port_mmio + PORT_SCR_STAT);
+ if ((port_status & 0xf) != 0x03) {
+ debug("No Link on port %d!\n", port);
+ return -1;
+ }
+
+ memcpy((unsigned char *)pp->cmd_tbl, fis, fis_len);
+
+ sg_count = ahci_fill_sg(port, buf, buf_len);
+ opts = (fis_len >> 2) | (sg_count << 16) | (is_write << 6);
+ ahci_fill_cmd_slot(pp, opts);
+
+ ahci_dcache_flush_sata_cmd(pp);
+ ahci_dcache_flush_range((unsigned long)buf, (unsigned long)buf_len);
+
+ writel_with_flush(1, port_mmio + PORT_CMD_ISSUE);
+
+ if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE,
+ WAIT_MS_DATAIO, 0x1)) {
+ printf("timeout exit!\n");
+ return -1;
+ }
+
+ ahci_dcache_invalidate_range((unsigned long)buf,
+ (unsigned long)buf_len);
+ debug("%s: %d byte transferred.\n", __func__, pp->cmd_slot->status);
+
+ return 0;
+}
+
+
+static char *ata_id_strcpy(u16 *target, u16 *src, int len)
+{
+ int i;
+ for (i = 0; i < len / 2; i++)
+ target[i] = swab16(src[i]);
+ return (char *)target;
+}
+
+/*
+ * SCSI INQUIRY command operation.
+ */
+static int ata_scsiop_inquiry(ccb *pccb)
+{
+ static const u8 hdr[] = {
+ 0,
+ 0,
+ 0x5, /* claim SPC-3 version compatibility */
+ 2,
+ 95 - 4,
+ };
+ u8 fis[20];
+ u16 *idbuf;
+ ALLOC_CACHE_ALIGN_BUFFER(u16, tmpid, ATA_ID_WORDS);
+ u8 port;
+
+ /* Clean ccb data buffer */
+ memset(pccb->pdata, 0, pccb->datalen);
+
+ memcpy(pccb->pdata, hdr, sizeof(hdr));
+
+ if (pccb->datalen <= 35)
+ return 0;
+
+ memset(fis, 0, sizeof(fis));
+ /* Construct the FIS */
+ fis[0] = 0x27; /* Host to device FIS. */
+ fis[1] = 1 << 7; /* Command FIS. */
+ fis[2] = ATA_CMD_ID_ATA; /* Command byte. */
+
+ /* Read id from sata */
+ port = pccb->target;
+
+ if (ahci_device_data_io(port, (u8 *) &fis, sizeof(fis), (u8 *)tmpid,
+ ATA_ID_WORDS * 2, 0)) {
+ debug("scsi_ahci: SCSI inquiry command failure.\n");
+ return -EIO;
+ }
+
+ if (!ataid[port]) {
+ ataid[port] = malloc(ATA_ID_WORDS * 2);
+ if (!ataid[port]) {
+ printf("%s: No memory for ataid[port]\n", __func__);
+ return -ENOMEM;
+ }
+ }
+
+ idbuf = ataid[port];
+
+ memcpy(idbuf, tmpid, ATA_ID_WORDS * 2);
+ ata_swap_buf_le16(idbuf, ATA_ID_WORDS);
+
+ memcpy(&pccb->pdata[8], "ATA ", 8);
+ ata_id_strcpy((u16 *)&pccb->pdata[16], &idbuf[ATA_ID_PROD], 16);
+ ata_id_strcpy((u16 *)&pccb->pdata[32], &idbuf[ATA_ID_FW_REV], 4);
+
+#ifdef DEBUG
+ ata_dump_id(idbuf);
+#endif
+ return 0;
+}
+
+
+/*
+ * SCSI READ10/WRITE10 command operation.
+ */
+static int ata_scsiop_read_write(ccb *pccb, u8 is_write)
+{
+ lbaint_t lba = 0;
+ u16 blocks = 0;
+ u8 fis[20];
+ u8 *user_buffer = pccb->pdata;
+ u32 user_buffer_size = pccb->datalen;
+
+ /* Retrieve the base LBA number from the ccb structure. */
+ if (pccb->cmd[0] == SCSI_READ16) {
+ memcpy(&lba, pccb->cmd + 2, 8);
+ lba = be64_to_cpu(lba);
+ } else {
+ u32 temp;
+ memcpy(&temp, pccb->cmd + 2, 4);
+ lba = be32_to_cpu(temp);
+ }
+
+ /*
+ * Retrieve the base LBA number and the block count from
+ * the ccb structure.
+ *
+ * For 10-byte and 16-byte SCSI R/W commands, transfer
+ * length 0 means transfer 0 block of data.
+ * However, for ATA R/W commands, sector count 0 means
+ * 256 or 65536 sectors, not 0 sectors as in SCSI.
+ *
+ * WARNING: one or two older ATA drives treat 0 as 0...
+ */
+ if (pccb->cmd[0] == SCSI_READ16)
+ blocks = (((u16)pccb->cmd[13]) << 8) | ((u16) pccb->cmd[14]);
+ else
+ blocks = (((u16)pccb->cmd[7]) << 8) | ((u16) pccb->cmd[8]);
+
+ debug("scsi_ahci: %s %u blocks starting from lba 0x" LBAFU "\n",
+ is_write ? "write" : "read", blocks, lba);
+
+ /* Preset the FIS */
+ memset(fis, 0, sizeof(fis));
+ fis[0] = 0x27; /* Host to device FIS. */
+ fis[1] = 1 << 7; /* Command FIS. */
+ /* Command byte (read/write). */
+ fis[2] = is_write ? ATA_CMD_WRITE_EXT : ATA_CMD_READ_EXT;
+
+ while (blocks) {
+ u16 now_blocks; /* number of blocks per iteration */
+ u32 transfer_size; /* number of bytes per iteration */
+
+ now_blocks = min((u16)MAX_SATA_BLOCKS_READ_WRITE, blocks);
+
+ transfer_size = ATA_SECT_SIZE * now_blocks;
+ if (transfer_size > user_buffer_size) {
+ printf("scsi_ahci: Error: buffer too small.\n");
+ return -EIO;
+ }
+
+ /*
+ * LBA48 SATA command but only use 32bit address range within
+ * that (unless we've enabled 64bit LBA support). The next
+ * smaller command range (28bit) is too small.
+ */
+ fis[4] = (lba >> 0) & 0xff;
+ fis[5] = (lba >> 8) & 0xff;
+ fis[6] = (lba >> 16) & 0xff;
+ fis[7] = 1 << 6; /* device reg: set LBA mode */
+ fis[8] = ((lba >> 24) & 0xff);
+#ifdef CONFIG_SYS_64BIT_LBA
+ if (pccb->cmd[0] == SCSI_READ16) {
+ fis[9] = ((lba >> 32) & 0xff);
+ fis[10] = ((lba >> 40) & 0xff);
+ }
+#endif
+
+ fis[3] = 0xe0; /* features */
+
+ /* Block (sector) count */
+ fis[12] = (now_blocks >> 0) & 0xff;
+ fis[13] = (now_blocks >> 8) & 0xff;
+
+ /* Read/Write from ahci */
+ if (ahci_device_data_io(pccb->target, (u8 *) &fis, sizeof(fis),
+ user_buffer, transfer_size,
+ is_write)) {
+ debug("scsi_ahci: SCSI %s10 command failure.\n",
+ is_write ? "WRITE" : "READ");
+ return -EIO;
+ }
+
+ /* If this transaction is a write, do a following flush.
+ * Writes in u-boot are so rare, and the logic to know when is
+ * the last write and do a flush only there is sufficiently
+ * difficult. Just do a flush after every write. This incurs,
+ * usually, one extra flush when the rare writes do happen.
+ */
+ if (is_write) {
+ if (-EIO == ata_io_flush(pccb->target))
+ return -EIO;
+ }
+ user_buffer += transfer_size;
+ user_buffer_size -= transfer_size;
+ blocks -= now_blocks;
+ lba += now_blocks;
+ }
+
+ return 0;
+}
+
+
+/*
+ * SCSI READ CAPACITY10 command operation.
+ */
+static int ata_scsiop_read_capacity10(ccb *pccb)
+{
+ u32 cap;
+ u64 cap64;
+ u32 block_size;
+
+ if (!ataid[pccb->target]) {
+ printf("scsi_ahci: SCSI READ CAPACITY10 command failure. "
+ "\tNo ATA info!\n"
+ "\tPlease run SCSI command INQUIRY first!\n");
+ return -EPERM;
+ }
+
+ cap64 = ata_id_n_sectors(ataid[pccb->target]);
+ if (cap64 > 0x100000000ULL)
+ cap64 = 0xffffffff;
+
+ cap = cpu_to_be32(cap64);
+ memcpy(pccb->pdata, &cap, sizeof(cap));
+
+ block_size = cpu_to_be32((u32)512);
+ memcpy(&pccb->pdata[4], &block_size, 4);
+
+ return 0;
+}
+
+
+/*
+ * SCSI READ CAPACITY16 command operation.
+ */
+static int ata_scsiop_read_capacity16(ccb *pccb)
+{
+ u64 cap;
+ u64 block_size;
+
+ if (!ataid[pccb->target]) {
+ printf("scsi_ahci: SCSI READ CAPACITY16 command failure. "
+ "\tNo ATA info!\n"
+ "\tPlease run SCSI command INQUIRY first!\n");
+ return -EPERM;
+ }
+
+ cap = ata_id_n_sectors(ataid[pccb->target]);
+ cap = cpu_to_be64(cap);
+ memcpy(pccb->pdata, &cap, sizeof(cap));
+
+ block_size = cpu_to_be64((u64)512);
+ memcpy(&pccb->pdata[8], &block_size, 8);
+
+ return 0;
+}
+
+
+/*
+ * SCSI TEST UNIT READY command operation.
+ */
+static int ata_scsiop_test_unit_ready(ccb *pccb)
+{
+ return (ataid[pccb->target]) ? 0 : -EPERM;
+}
+
+
+int scsi_exec(ccb *pccb)
+{
+ int ret;
+
+ switch (pccb->cmd[0]) {
+ case SCSI_READ16:
+ case SCSI_READ10:
+ ret = ata_scsiop_read_write(pccb, 0);
+ break;
+ case SCSI_WRITE10:
+ ret = ata_scsiop_read_write(pccb, 1);
+ break;
+ case SCSI_RD_CAPAC10:
+ ret = ata_scsiop_read_capacity10(pccb);
+ break;
+ case SCSI_RD_CAPAC16:
+ ret = ata_scsiop_read_capacity16(pccb);
+ break;
+ case SCSI_TST_U_RDY:
+ ret = ata_scsiop_test_unit_ready(pccb);
+ break;
+ case SCSI_INQUIRY:
+ ret = ata_scsiop_inquiry(pccb);
+ break;
+ default:
+ printf("Unsupport SCSI command 0x%02x\n", pccb->cmd[0]);
+ return false;
+ }
+
+ if (ret) {
+ debug("SCSI command 0x%02x ret errno %d\n", pccb->cmd[0], ret);
+ return false;
+ }
+ return true;
+
+}
+
+#if defined(CONFIG_DM_SCSI)
+void scsi_low_level_init(int busdevfunc, struct udevice *dev)
+#else
+void scsi_low_level_init(int busdevfunc)
+#endif
+{
+ int i;
+ u32 linkmap;
+
+#ifndef CONFIG_SCSI_AHCI_PLAT
+# if defined(CONFIG_DM_PCI)
+ struct udevice *dev;
+ int ret;
+
+ ret = dm_pci_bus_find_bdf(busdevfunc, &dev);
+ if (ret)
+ return;
+ ahci_init_one(dev);
+# elif defined(CONFIG_DM_SCSI)
+ ahci_init_one(dev);
+# else
+ ahci_init_one(busdevfunc);
+# endif
+#endif
+
+ linkmap = probe_ent->link_port_map;
+
+ for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) {
+ if (((linkmap >> i) & 0x01)) {
+ if (ahci_port_start((u8) i)) {
+ printf("Can not start port %d\n", i);
+ continue;
+ }
+ }
+ }
+}
+
+#ifdef CONFIG_SCSI_AHCI_PLAT
+int ahci_init(void __iomem *base)
+{
+ int i, rc = 0;
+ u32 linkmap;
+
+ probe_ent = malloc(sizeof(struct ahci_probe_ent));
+ if (!probe_ent) {
+ printf("%s: No memory for probe_ent\n", __func__);
+ return -ENOMEM;
+ }
+
+ memset(probe_ent, 0, sizeof(struct ahci_probe_ent));
+
+ probe_ent->host_flags = ATA_FLAG_SATA
+ | ATA_FLAG_NO_LEGACY
+ | ATA_FLAG_MMIO
+ | ATA_FLAG_PIO_DMA
+ | ATA_FLAG_NO_ATAPI;
+ probe_ent->pio_mask = 0x1f;
+ probe_ent->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */
+
+ probe_ent->mmio_base = base;
+
+ /* initialize adapter */
+ rc = ahci_host_init(probe_ent);
+ if (rc)
+ goto err_out;
+
+ ahci_print_info(probe_ent);
+
+ linkmap = probe_ent->link_port_map;
+
+ for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) {
+ if (((linkmap >> i) & 0x01)) {
+ if (ahci_port_start((u8) i)) {
+ printf("Can not start port %d\n", i);
+ continue;
+ }
+ }
+ }
+err_out:
+ return rc;
+}
+
+void __weak scsi_init(void)
+{
+}
+
+#endif
+
+/*
+ * In the general case of generic rotating media it makes sense to have a
+ * flush capability. It probably even makes sense in the case of SSDs because
+ * one cannot always know for sure what kind of internal cache/flush mechanism
+ * is embodied therein. At first it was planned to invoke this after the last
+ * write to disk and before rebooting. In practice, knowing, a priori, which
+ * is the last write is difficult. Because writing to the disk in u-boot is
+ * very rare, this flush command will be invoked after every block write.
+ */
+static int ata_io_flush(u8 port)
+{
+ u8 fis[20];
+ struct ahci_ioports *pp = &(probe_ent->port[port]);
+ void __iomem *port_mmio = pp->port_mmio;
+ u32 cmd_fis_len = 5; /* five dwords */
+
+ /* Preset the FIS */
+ memset(fis, 0, 20);
+ fis[0] = 0x27; /* Host to device FIS. */
+ fis[1] = 1 << 7; /* Command FIS. */
+ fis[2] = ATA_CMD_FLUSH_EXT;
+
+ memcpy((unsigned char *)pp->cmd_tbl, fis, 20);
+ ahci_fill_cmd_slot(pp, cmd_fis_len);
+ ahci_dcache_flush_sata_cmd(pp);
+ writel_with_flush(1, port_mmio + PORT_CMD_ISSUE);
+
+ if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE,
+ WAIT_MS_FLUSH, 0x1)) {
+ debug("scsi_ahci: flush command timeout on port %d.\n", port);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+
+__weak void scsi_bus_reset(void)
+{
+ /*Not implement*/
+}
diff --git a/drivers/ata/dwc_ahci.c b/drivers/ata/dwc_ahci.c
new file mode 100644
index 0000000000..3f839bf987
--- /dev/null
+++ b/drivers/ata/dwc_ahci.c
@@ -0,0 +1,101 @@
+/*
+ * DWC SATA platform driver
+ *
+ * (C) Copyright 2016
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * Author: Mugunthan V N <mugunthanvnm@ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <ahci.h>
+#include <scsi.h>
+#include <sata.h>
+#include <asm/arch/sata.h>
+#include <asm/io.h>
+#include <generic-phy.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct dwc_ahci_priv {
+ void *base;
+ void *wrapper_base;
+};
+
+static int dwc_ahci_ofdata_to_platdata(struct udevice *dev)
+{
+ struct dwc_ahci_priv *priv = dev_get_priv(dev);
+ struct scsi_platdata *plat = dev_get_platdata(dev);
+ fdt_addr_t addr;
+
+ plat->max_id = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev),
+ "max-id", CONFIG_SYS_SCSI_MAX_SCSI_ID);
+ plat->max_lun = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev),
+ "max-lun", CONFIG_SYS_SCSI_MAX_LUN);
+
+ priv->base = map_physmem(devfdt_get_addr(dev), sizeof(void *),
+ MAP_NOCACHE);
+
+ addr = devfdt_get_addr_index(dev, 1);
+ if (addr != FDT_ADDR_T_NONE) {
+ priv->wrapper_base = map_physmem(addr, sizeof(void *),
+ MAP_NOCACHE);
+ } else {
+ priv->wrapper_base = NULL;
+ }
+
+ return 0;
+}
+
+static int dwc_ahci_probe(struct udevice *dev)
+{
+ struct dwc_ahci_priv *priv = dev_get_priv(dev);
+ int ret;
+ struct phy phy;
+
+ ret = generic_phy_get_by_name(dev, "sata-phy", &phy);
+ if (ret) {
+ error("can't get the phy from DT\n");
+ return ret;
+ }
+
+ ret = generic_phy_init(&phy);
+ if (ret) {
+ error("unable to initialize the sata phy\n");
+ return ret;
+ }
+
+ ret = generic_phy_power_on(&phy);
+ if (ret) {
+ error("unable to power on the sata phy\n");
+ return ret;
+ }
+
+ if (priv->wrapper_base) {
+ u32 val = TI_SATA_IDLE_NO | TI_SATA_STANDBY_NO;
+
+ /* Enable SATA module, No Idle, No Standby */
+ writel(val, priv->wrapper_base + TI_SATA_SYSCONFIG);
+ }
+
+ return ahci_init(priv->base);
+}
+
+static const struct udevice_id dwc_ahci_ids[] = {
+ { .compatible = "snps,dwc-ahci" },
+ { }
+};
+
+U_BOOT_DRIVER(dwc_ahci) = {
+ .name = "dwc_ahci",
+ .id = UCLASS_SCSI,
+ .of_match = dwc_ahci_ids,
+ .ofdata_to_platdata = dwc_ahci_ofdata_to_platdata,
+ .probe = dwc_ahci_probe,
+ .priv_auto_alloc_size = sizeof(struct dwc_ahci_priv),
+ .platdata_auto_alloc_size = sizeof(struct scsi_platdata),
+ .flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
diff --git a/drivers/ata/dwc_ahsata.c b/drivers/ata/dwc_ahsata.c
new file mode 100644
index 0000000000..c306e927db
--- /dev/null
+++ b/drivers/ata/dwc_ahsata.c
@@ -0,0 +1,1018 @@
+/*
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Terry Lv <r65388@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <libata.h>
+#include <ahci.h>
+#include <fis.h>
+#include <sata.h>
+
+#include <common.h>
+#include <malloc.h>
+#include <linux/ctype.h>
+#include <linux/errno.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include "dwc_ahsata.h"
+
+struct sata_port_regs {
+ u32 clb;
+ u32 clbu;
+ u32 fb;
+ u32 fbu;
+ u32 is;
+ u32 ie;
+ u32 cmd;
+ u32 res1[1];
+ u32 tfd;
+ u32 sig;
+ u32 ssts;
+ u32 sctl;
+ u32 serr;
+ u32 sact;
+ u32 ci;
+ u32 sntf;
+ u32 res2[1];
+ u32 dmacr;
+ u32 res3[1];
+ u32 phycr;
+ u32 physr;
+};
+
+struct sata_host_regs {
+ u32 cap;
+ u32 ghc;
+ u32 is;
+ u32 pi;
+ u32 vs;
+ u32 ccc_ctl;
+ u32 ccc_ports;
+ u32 res1[2];
+ u32 cap2;
+ u32 res2[30];
+ u32 bistafr;
+ u32 bistcr;
+ u32 bistfctr;
+ u32 bistsr;
+ u32 bistdecr;
+ u32 res3[2];
+ u32 oobr;
+ u32 res4[8];
+ u32 timer1ms;
+ u32 res5[1];
+ u32 gparam1r;
+ u32 gparam2r;
+ u32 pparamr;
+ u32 testr;
+ u32 versionr;
+ u32 idr;
+};
+
+#define MAX_DATA_BYTES_PER_SG (4 * 1024 * 1024)
+#define MAX_BYTES_PER_TRANS (AHCI_MAX_SG * MAX_DATA_BYTES_PER_SG)
+
+#define writel_with_flush(a, b) do { writel(a, b); readl(b); } while (0)
+
+static int is_ready;
+
+static inline void __iomem *ahci_port_base(void __iomem *base, u32 port)
+{
+ return base + 0x100 + (port * 0x80);
+}
+
+static int waiting_for_cmd_completed(u8 *offset,
+ int timeout_msec,
+ u32 sign)
+{
+ int i;
+ u32 status;
+
+ for (i = 0;
+ ((status = readl(offset)) & sign) && i < timeout_msec;
+ ++i)
+ mdelay(1);
+
+ return (i < timeout_msec) ? 0 : -1;
+}
+
+static int ahci_setup_oobr(struct ahci_probe_ent *probe_ent,
+ int clk)
+{
+ struct sata_host_regs *host_mmio =
+ (struct sata_host_regs *)probe_ent->mmio_base;
+
+ writel(SATA_HOST_OOBR_WE, &(host_mmio->oobr));
+ writel(0x02060b14, &(host_mmio->oobr));
+
+ return 0;
+}
+
+static int ahci_host_init(struct ahci_probe_ent *probe_ent)
+{
+ u32 tmp, cap_save, num_ports;
+ int i, j, timeout = 1000;
+ struct sata_port_regs *port_mmio = NULL;
+ struct sata_host_regs *host_mmio =
+ (struct sata_host_regs *)probe_ent->mmio_base;
+ int clk = mxc_get_clock(MXC_SATA_CLK);
+
+ cap_save = readl(&(host_mmio->cap));
+ cap_save |= SATA_HOST_CAP_SSS;
+
+ /* global controller reset */
+ tmp = readl(&(host_mmio->ghc));
+ if ((tmp & SATA_HOST_GHC_HR) == 0)
+ writel_with_flush(tmp | SATA_HOST_GHC_HR, &(host_mmio->ghc));
+
+ while ((readl(&(host_mmio->ghc)) & SATA_HOST_GHC_HR)
+ && --timeout)
+ ;
+
+ if (timeout <= 0) {
+ debug("controller reset failed (0x%x)\n", tmp);
+ return -1;
+ }
+
+ /* Set timer 1ms */
+ writel(clk / 1000, &(host_mmio->timer1ms));
+
+ ahci_setup_oobr(probe_ent, 0);
+
+ writel_with_flush(SATA_HOST_GHC_AE, &(host_mmio->ghc));
+ writel(cap_save, &(host_mmio->cap));
+ num_ports = (cap_save & SATA_HOST_CAP_NP_MASK) + 1;
+ writel_with_flush((1 << num_ports) - 1,
+ &(host_mmio->pi));
+
+ /*
+ * Determine which Ports are implemented by the DWC_ahsata,
+ * by reading the PI register. This bit map value aids the
+ * software to determine how many Ports are available and
+ * which Port registers need to be initialized.
+ */
+ probe_ent->cap = readl(&(host_mmio->cap));
+ probe_ent->port_map = readl(&(host_mmio->pi));
+
+ /* Determine how many command slots the HBA supports */
+ probe_ent->n_ports =
+ (probe_ent->cap & SATA_HOST_CAP_NP_MASK) + 1;
+
+ debug("cap 0x%x port_map 0x%x n_ports %d\n",
+ probe_ent->cap, probe_ent->port_map, probe_ent->n_ports);
+
+ for (i = 0; i < probe_ent->n_ports; i++) {
+ probe_ent->port[i].port_mmio =
+ ahci_port_base(host_mmio, i);
+ port_mmio =
+ (struct sata_port_regs *)probe_ent->port[i].port_mmio;
+
+ /* Ensure that the DWC_ahsata is in idle state */
+ tmp = readl(&(port_mmio->cmd));
+
+ /*
+ * When P#CMD.ST, P#CMD.CR, P#CMD.FRE and P#CMD.FR
+ * are all cleared, the Port is in an idle state.
+ */
+ if (tmp & (SATA_PORT_CMD_CR | SATA_PORT_CMD_FR |
+ SATA_PORT_CMD_FRE | SATA_PORT_CMD_ST)) {
+
+ /*
+ * System software places a Port into the idle state by
+ * clearing P#CMD.ST and waiting for P#CMD.CR to return
+ * 0 when read.
+ */
+ tmp &= ~SATA_PORT_CMD_ST;
+ writel_with_flush(tmp, &(port_mmio->cmd));
+
+ /*
+ * spec says 500 msecs for each bit, so
+ * this is slightly incorrect.
+ */
+ mdelay(500);
+
+ timeout = 1000;
+ while ((readl(&(port_mmio->cmd)) & SATA_PORT_CMD_CR)
+ && --timeout)
+ ;
+
+ if (timeout <= 0) {
+ debug("port reset failed (0x%x)\n", tmp);
+ return -1;
+ }
+ }
+
+ /* Spin-up device */
+ tmp = readl(&(port_mmio->cmd));
+ writel((tmp | SATA_PORT_CMD_SUD), &(port_mmio->cmd));
+
+ /* Wait for spin-up to finish */
+ timeout = 1000;
+ while (!(readl(&(port_mmio->cmd)) | SATA_PORT_CMD_SUD)
+ && --timeout)
+ ;
+ if (timeout <= 0) {
+ debug("Spin-Up can't finish!\n");
+ return -1;
+ }
+
+ for (j = 0; j < 100; ++j) {
+ mdelay(10);
+ tmp = readl(&(port_mmio->ssts));
+ if (((tmp & SATA_PORT_SSTS_DET_MASK) == 0x3) ||
+ ((tmp & SATA_PORT_SSTS_DET_MASK) == 0x1))
+ break;
+ }
+
+ /* Wait for COMINIT bit 26 (DIAG_X) in SERR */
+ timeout = 1000;
+ while (!(readl(&(port_mmio->serr)) | SATA_PORT_SERR_DIAG_X)
+ && --timeout)
+ ;
+ if (timeout <= 0) {
+ debug("Can't find DIAG_X set!\n");
+ return -1;
+ }
+
+ /*
+ * For each implemented Port, clear the P#SERR
+ * register, by writing ones to each implemented\
+ * bit location.
+ */
+ tmp = readl(&(port_mmio->serr));
+ debug("P#SERR 0x%x\n",
+ tmp);
+ writel(tmp, &(port_mmio->serr));
+
+ /* Ack any pending irq events for this port */
+ tmp = readl(&(host_mmio->is));
+ debug("IS 0x%x\n", tmp);
+ if (tmp)
+ writel(tmp, &(host_mmio->is));
+
+ writel(1 << i, &(host_mmio->is));
+
+ /* set irq mask (enables interrupts) */
+ writel(DEF_PORT_IRQ, &(port_mmio->ie));
+
+ /* register linkup ports */
+ tmp = readl(&(port_mmio->ssts));
+ debug("Port %d status: 0x%x\n", i, tmp);
+ if ((tmp & SATA_PORT_SSTS_DET_MASK) == 0x03)
+ probe_ent->link_port_map |= (0x01 << i);
+ }
+
+ tmp = readl(&(host_mmio->ghc));
+ debug("GHC 0x%x\n", tmp);
+ writel(tmp | SATA_HOST_GHC_IE, &(host_mmio->ghc));
+ tmp = readl(&(host_mmio->ghc));
+ debug("GHC 0x%x\n", tmp);
+
+ return 0;
+}
+
+static void ahci_print_info(struct ahci_probe_ent *probe_ent)
+{
+ struct sata_host_regs *host_mmio =
+ (struct sata_host_regs *)probe_ent->mmio_base;
+ u32 vers, cap, impl, speed;
+ const char *speed_s;
+ const char *scc_s;
+
+ vers = readl(&(host_mmio->vs));
+ cap = probe_ent->cap;
+ impl = probe_ent->port_map;
+
+ speed = (cap & SATA_HOST_CAP_ISS_MASK)
+ >> SATA_HOST_CAP_ISS_OFFSET;
+ if (speed == 1)
+ speed_s = "1.5";
+ else if (speed == 2)
+ speed_s = "3";
+ else
+ speed_s = "?";
+
+ scc_s = "SATA";
+
+ printf("AHCI %02x%02x.%02x%02x "
+ "%u slots %u ports %s Gbps 0x%x impl %s mode\n",
+ (vers >> 24) & 0xff,
+ (vers >> 16) & 0xff,
+ (vers >> 8) & 0xff,
+ vers & 0xff,
+ ((cap >> 8) & 0x1f) + 1,
+ (cap & 0x1f) + 1,
+ speed_s,
+ impl,
+ scc_s);
+
+ printf("flags: "
+ "%s%s%s%s%s%s"
+ "%s%s%s%s%s%s%s\n",
+ cap & (1 << 31) ? "64bit " : "",
+ cap & (1 << 30) ? "ncq " : "",
+ cap & (1 << 28) ? "ilck " : "",
+ cap & (1 << 27) ? "stag " : "",
+ cap & (1 << 26) ? "pm " : "",
+ cap & (1 << 25) ? "led " : "",
+ cap & (1 << 24) ? "clo " : "",
+ cap & (1 << 19) ? "nz " : "",
+ cap & (1 << 18) ? "only " : "",
+ cap & (1 << 17) ? "pmp " : "",
+ cap & (1 << 15) ? "pio " : "",
+ cap & (1 << 14) ? "slum " : "",
+ cap & (1 << 13) ? "part " : "");
+}
+
+static int ahci_init_one(int pdev)
+{
+ int rc;
+ struct ahci_probe_ent *probe_ent = NULL;
+
+ probe_ent = malloc(sizeof(struct ahci_probe_ent));
+ memset(probe_ent, 0, sizeof(struct ahci_probe_ent));
+ probe_ent->dev = pdev;
+
+ probe_ent->host_flags = ATA_FLAG_SATA
+ | ATA_FLAG_NO_LEGACY
+ | ATA_FLAG_MMIO
+ | ATA_FLAG_PIO_DMA
+ | ATA_FLAG_NO_ATAPI;
+
+ probe_ent->mmio_base = (void __iomem *)CONFIG_DWC_AHSATA_BASE_ADDR;
+
+ /* initialize adapter */
+ rc = ahci_host_init(probe_ent);
+ if (rc)
+ goto err_out;
+
+ ahci_print_info(probe_ent);
+
+ /* Save the private struct to block device struct */
+ sata_dev_desc[pdev].priv = (void *)probe_ent;
+
+ return 0;
+
+err_out:
+ return rc;
+}
+
+static int ahci_fill_sg(struct ahci_probe_ent *probe_ent,
+ u8 port, unsigned char *buf, int buf_len)
+{
+ struct ahci_ioports *pp = &(probe_ent->port[port]);
+ struct ahci_sg *ahci_sg = pp->cmd_tbl_sg;
+ u32 sg_count, max_bytes;
+ int i;
+
+ max_bytes = MAX_DATA_BYTES_PER_SG;
+ sg_count = ((buf_len - 1) / max_bytes) + 1;
+ if (sg_count > AHCI_MAX_SG) {
+ printf("Error:Too much sg!\n");
+ return -1;
+ }
+
+ for (i = 0; i < sg_count; i++) {
+ ahci_sg->addr =
+ cpu_to_le32((u32)buf + i * max_bytes);
+ ahci_sg->addr_hi = 0;
+ ahci_sg->flags_size = cpu_to_le32(0x3fffff &
+ (buf_len < max_bytes
+ ? (buf_len - 1)
+ : (max_bytes - 1)));
+ ahci_sg++;
+ buf_len -= max_bytes;
+ }
+
+ return sg_count;
+}
+
+static void ahci_fill_cmd_slot(struct ahci_ioports *pp, u32 cmd_slot, u32 opts)
+{
+ struct ahci_cmd_hdr *cmd_hdr = (struct ahci_cmd_hdr *)(pp->cmd_slot +
+ AHCI_CMD_SLOT_SZ * cmd_slot);
+
+ memset(cmd_hdr, 0, AHCI_CMD_SLOT_SZ);
+ cmd_hdr->opts = cpu_to_le32(opts);
+ cmd_hdr->status = 0;
+ pp->cmd_slot->tbl_addr = cpu_to_le32((u32)pp->cmd_tbl & 0xffffffff);
+#ifdef CONFIG_PHYS_64BIT
+ pp->cmd_slot->tbl_addr_hi =
+ cpu_to_le32((u32)(((pp->cmd_tbl) >> 16) >> 16));
+#endif
+}
+
+#define AHCI_GET_CMD_SLOT(c) ((c) ? ffs(c) : 0)
+
+static int ahci_exec_ata_cmd(struct ahci_probe_ent *probe_ent,
+ u8 port, struct sata_fis_h2d *cfis,
+ u8 *buf, u32 buf_len, s32 is_write)
+{
+ struct ahci_ioports *pp = &(probe_ent->port[port]);
+ struct sata_port_regs *port_mmio =
+ (struct sata_port_regs *)pp->port_mmio;
+ u32 opts;
+ int sg_count = 0, cmd_slot = 0;
+
+ cmd_slot = AHCI_GET_CMD_SLOT(readl(&(port_mmio->ci)));
+ if (32 == cmd_slot) {
+ printf("Can't find empty command slot!\n");
+ return 0;
+ }
+
+ /* Check xfer length */
+ if (buf_len > MAX_BYTES_PER_TRANS) {
+ printf("Max transfer length is %dB\n\r",
+ MAX_BYTES_PER_TRANS);
+ return 0;
+ }
+
+ memcpy((u8 *)(pp->cmd_tbl), cfis, sizeof(struct sata_fis_h2d));
+ if (buf && buf_len)
+ sg_count = ahci_fill_sg(probe_ent, port, buf, buf_len);
+ opts = (sizeof(struct sata_fis_h2d) >> 2) | (sg_count << 16);
+ if (is_write) {
+ opts |= 0x40;
+ flush_cache((ulong)buf, buf_len);
+ }
+ ahci_fill_cmd_slot(pp, cmd_slot, opts);
+
+ flush_cache((int)(pp->cmd_slot), AHCI_PORT_PRIV_DMA_SZ);
+ writel_with_flush(1 << cmd_slot, &(port_mmio->ci));
+
+ if (waiting_for_cmd_completed((u8 *)&(port_mmio->ci),
+ 10000, 0x1 << cmd_slot)) {
+ printf("timeout exit!\n");
+ return -1;
+ }
+ invalidate_dcache_range((int)(pp->cmd_slot),
+ (int)(pp->cmd_slot)+AHCI_PORT_PRIV_DMA_SZ);
+ debug("ahci_exec_ata_cmd: %d byte transferred.\n",
+ pp->cmd_slot->status);
+ if (!is_write)
+ invalidate_dcache_range((ulong)buf, (ulong)buf+buf_len);
+
+ return buf_len;
+}
+
+static void ahci_set_feature(u8 dev, u8 port)
+{
+ struct ahci_probe_ent *probe_ent =
+ (struct ahci_probe_ent *)sata_dev_desc[dev].priv;
+ struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN);
+ struct sata_fis_h2d *cfis = &h2d;
+
+ memset(cfis, 0, sizeof(struct sata_fis_h2d));
+ cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis->pm_port_c = 1 << 7;
+ cfis->command = ATA_CMD_SET_FEATURES;
+ cfis->features = SETFEATURES_XFER;
+ cfis->sector_count = ffs(probe_ent->udma_mask + 1) + 0x3e;
+
+ ahci_exec_ata_cmd(probe_ent, port, cfis, NULL, 0, READ_CMD);
+}
+
+static int ahci_port_start(struct ahci_probe_ent *probe_ent,
+ u8 port)
+{
+ struct ahci_ioports *pp = &(probe_ent->port[port]);
+ struct sata_port_regs *port_mmio =
+ (struct sata_port_regs *)pp->port_mmio;
+ u32 port_status;
+ u32 mem;
+ int timeout = 10000000;
+
+ debug("Enter start port: %d\n", port);
+ port_status = readl(&(port_mmio->ssts));
+ debug("Port %d status: %x\n", port, port_status);
+ if ((port_status & 0xf) != 0x03) {
+ printf("No Link on this port!\n");
+ return -1;
+ }
+
+ mem = (u32)malloc(AHCI_PORT_PRIV_DMA_SZ + 1024);
+ if (!mem) {
+ free(pp);
+ printf("No mem for table!\n");
+ return -ENOMEM;
+ }
+
+ mem = (mem + 0x400) & (~0x3ff); /* Aligned to 1024-bytes */
+ memset((u8 *)mem, 0, AHCI_PORT_PRIV_DMA_SZ);
+
+ /*
+ * First item in chunk of DMA memory: 32-slot command table,
+ * 32 bytes each in size
+ */
+ pp->cmd_slot = (struct ahci_cmd_hdr *)mem;
+ debug("cmd_slot = 0x%x\n", (unsigned int) pp->cmd_slot);
+ mem += (AHCI_CMD_SLOT_SZ * DWC_AHSATA_MAX_CMD_SLOTS);
+
+ /*
+ * Second item: Received-FIS area, 256-Byte aligned
+ */
+ pp->rx_fis = mem;
+ mem += AHCI_RX_FIS_SZ;
+
+ /*
+ * Third item: data area for storing a single command
+ * and its scatter-gather table
+ */
+ pp->cmd_tbl = mem;
+ debug("cmd_tbl_dma = 0x%lx\n", pp->cmd_tbl);
+
+ mem += AHCI_CMD_TBL_HDR;
+
+ writel_with_flush(0x00004444, &(port_mmio->dmacr));
+ pp->cmd_tbl_sg = (struct ahci_sg *)mem;
+ writel_with_flush((u32)pp->cmd_slot, &(port_mmio->clb));
+ writel_with_flush(pp->rx_fis, &(port_mmio->fb));
+
+ /* Enable FRE */
+ writel_with_flush((SATA_PORT_CMD_FRE | readl(&(port_mmio->cmd))),
+ &(port_mmio->cmd));
+
+ /* Wait device ready */
+ while ((readl(&(port_mmio->tfd)) & (SATA_PORT_TFD_STS_ERR |
+ SATA_PORT_TFD_STS_DRQ | SATA_PORT_TFD_STS_BSY))
+ && --timeout)
+ ;
+ if (timeout <= 0) {
+ debug("Device not ready for BSY, DRQ and"
+ "ERR in TFD!\n");
+ return -1;
+ }
+
+ writel_with_flush(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX |
+ PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP |
+ PORT_CMD_START, &(port_mmio->cmd));
+
+ debug("Exit start port %d\n", port);
+
+ return 0;
+}
+
+int init_sata(int dev)
+{
+ int i;
+ u32 linkmap;
+ struct ahci_probe_ent *probe_ent = NULL;
+
+#if defined(CONFIG_MX6)
+ if (!is_mx6dq() && !is_mx6dqp())
+ return 1;
+#endif
+ if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
+ printf("The sata index %d is out of ranges\n\r", dev);
+ return -1;
+ }
+
+ ahci_init_one(dev);
+
+ probe_ent = (struct ahci_probe_ent *)sata_dev_desc[dev].priv;
+ linkmap = probe_ent->link_port_map;
+
+ if (0 == linkmap) {
+ printf("No port device detected!\n");
+ return 1;
+ }
+
+ for (i = 0; i < probe_ent->n_ports; i++) {
+ if ((linkmap >> i) && ((linkmap >> i) & 0x01)) {
+ if (ahci_port_start(probe_ent, (u8)i)) {
+ printf("Can not start port %d\n", i);
+ return 1;
+ }
+ probe_ent->hard_port_no = i;
+ break;
+ }
+ }
+
+ return 0;
+}
+
+int reset_sata(int dev)
+{
+ struct ahci_probe_ent *probe_ent;
+ struct sata_host_regs *host_mmio;
+
+ if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
+ printf("The sata index %d is out of ranges\n\r", dev);
+ return -1;
+ }
+
+ probe_ent = (struct ahci_probe_ent *)sata_dev_desc[dev].priv;
+ if (NULL == probe_ent)
+ /* not initialized, so nothing to reset */
+ return 0;
+
+ host_mmio = (struct sata_host_regs *)probe_ent->mmio_base;
+ setbits_le32(&host_mmio->ghc, SATA_HOST_GHC_HR);
+ while (readl(&host_mmio->ghc) & SATA_HOST_GHC_HR)
+ udelay(100);
+
+ return 0;
+}
+
+static void dwc_ahsata_print_info(int dev)
+{
+ struct blk_desc *pdev = &(sata_dev_desc[dev]);
+
+ printf("SATA Device Info:\n\r");
+#ifdef CONFIG_SYS_64BIT_LBA
+ printf("S/N: %s\n\rProduct model number: %s\n\r"
+ "Firmware version: %s\n\rCapacity: %lld sectors\n\r",
+ pdev->product, pdev->vendor, pdev->revision, pdev->lba);
+#else
+ printf("S/N: %s\n\rProduct model number: %s\n\r"
+ "Firmware version: %s\n\rCapacity: %ld sectors\n\r",
+ pdev->product, pdev->vendor, pdev->revision, pdev->lba);
+#endif
+}
+
+static void dwc_ahsata_identify(int dev, u16 *id)
+{
+ struct ahci_probe_ent *probe_ent =
+ (struct ahci_probe_ent *)sata_dev_desc[dev].priv;
+ struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN);
+ struct sata_fis_h2d *cfis = &h2d;
+ u8 port = probe_ent->hard_port_no;
+
+ memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis->pm_port_c = 0x80; /* is command */
+ cfis->command = ATA_CMD_ID_ATA;
+
+ ahci_exec_ata_cmd(probe_ent, port, cfis,
+ (u8 *)id, ATA_ID_WORDS * 2, READ_CMD);
+ ata_swap_buf_le16(id, ATA_ID_WORDS);
+}
+
+static void dwc_ahsata_xfer_mode(int dev, u16 *id)
+{
+ struct ahci_probe_ent *probe_ent =
+ (struct ahci_probe_ent *)sata_dev_desc[dev].priv;
+
+ probe_ent->pio_mask = id[ATA_ID_PIO_MODES];
+ probe_ent->udma_mask = id[ATA_ID_UDMA_MODES];
+ debug("pio %04x, udma %04x\n\r",
+ probe_ent->pio_mask, probe_ent->udma_mask);
+}
+
+static u32 dwc_ahsata_rw_cmd(int dev, u32 start, u32 blkcnt,
+ u8 *buffer, int is_write)
+{
+ struct ahci_probe_ent *probe_ent =
+ (struct ahci_probe_ent *)sata_dev_desc[dev].priv;
+ struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN);
+ struct sata_fis_h2d *cfis = &h2d;
+ u8 port = probe_ent->hard_port_no;
+ u32 block;
+
+ block = start;
+
+ memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis->pm_port_c = 0x80; /* is command */
+ cfis->command = (is_write) ? ATA_CMD_WRITE : ATA_CMD_READ;
+ cfis->device = ATA_LBA;
+
+ cfis->device |= (block >> 24) & 0xf;
+ cfis->lba_high = (block >> 16) & 0xff;
+ cfis->lba_mid = (block >> 8) & 0xff;
+ cfis->lba_low = block & 0xff;
+ cfis->sector_count = (u8)(blkcnt & 0xff);
+
+ if (ahci_exec_ata_cmd(probe_ent, port, cfis,
+ buffer, ATA_SECT_SIZE * blkcnt, is_write) > 0)
+ return blkcnt;
+ else
+ return 0;
+}
+
+void dwc_ahsata_flush_cache(int dev)
+{
+ struct ahci_probe_ent *probe_ent =
+ (struct ahci_probe_ent *)sata_dev_desc[dev].priv;
+ struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN);
+ struct sata_fis_h2d *cfis = &h2d;
+ u8 port = probe_ent->hard_port_no;
+
+ memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis->pm_port_c = 0x80; /* is command */
+ cfis->command = ATA_CMD_FLUSH;
+
+ ahci_exec_ata_cmd(probe_ent, port, cfis, NULL, 0, 0);
+}
+
+static u32 dwc_ahsata_rw_cmd_ext(int dev, u32 start, lbaint_t blkcnt,
+ u8 *buffer, int is_write)
+{
+ struct ahci_probe_ent *probe_ent =
+ (struct ahci_probe_ent *)sata_dev_desc[dev].priv;
+ struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN);
+ struct sata_fis_h2d *cfis = &h2d;
+ u8 port = probe_ent->hard_port_no;
+ u64 block;
+
+ block = (u64)start;
+
+ memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis->pm_port_c = 0x80; /* is command */
+
+ cfis->command = (is_write) ? ATA_CMD_WRITE_EXT
+ : ATA_CMD_READ_EXT;
+
+ cfis->lba_high_exp = (block >> 40) & 0xff;
+ cfis->lba_mid_exp = (block >> 32) & 0xff;
+ cfis->lba_low_exp = (block >> 24) & 0xff;
+ cfis->lba_high = (block >> 16) & 0xff;
+ cfis->lba_mid = (block >> 8) & 0xff;
+ cfis->lba_low = block & 0xff;
+ cfis->device = ATA_LBA;
+ cfis->sector_count_exp = (blkcnt >> 8) & 0xff;
+ cfis->sector_count = blkcnt & 0xff;
+
+ if (ahci_exec_ata_cmd(probe_ent, port, cfis, buffer,
+ ATA_SECT_SIZE * blkcnt, is_write) > 0)
+ return blkcnt;
+ else
+ return 0;
+}
+
+u32 dwc_ahsata_rw_ncq_cmd(int dev, u32 start, lbaint_t blkcnt,
+ u8 *buffer, int is_write)
+{
+ struct ahci_probe_ent *probe_ent =
+ (struct ahci_probe_ent *)sata_dev_desc[dev].priv;
+ struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN);
+ struct sata_fis_h2d *cfis = &h2d;
+ u8 port = probe_ent->hard_port_no;
+ u64 block;
+
+ if (sata_dev_desc[dev].lba48 != 1) {
+ printf("execute FPDMA command on non-LBA48 hard disk\n\r");
+ return -1;
+ }
+
+ block = (u64)start;
+
+ memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis->pm_port_c = 0x80; /* is command */
+
+ cfis->command = (is_write) ? ATA_CMD_FPDMA_WRITE
+ : ATA_CMD_FPDMA_READ;
+
+ cfis->lba_high_exp = (block >> 40) & 0xff;
+ cfis->lba_mid_exp = (block >> 32) & 0xff;
+ cfis->lba_low_exp = (block >> 24) & 0xff;
+ cfis->lba_high = (block >> 16) & 0xff;
+ cfis->lba_mid = (block >> 8) & 0xff;
+ cfis->lba_low = block & 0xff;
+
+ cfis->device = ATA_LBA;
+ cfis->features_exp = (blkcnt >> 8) & 0xff;
+ cfis->features = blkcnt & 0xff;
+
+ /* Use the latest queue */
+ ahci_exec_ata_cmd(probe_ent, port, cfis,
+ buffer, ATA_SECT_SIZE * blkcnt, is_write);
+
+ return blkcnt;
+}
+
+void dwc_ahsata_flush_cache_ext(int dev)
+{
+ struct ahci_probe_ent *probe_ent =
+ (struct ahci_probe_ent *)sata_dev_desc[dev].priv;
+ struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN);
+ struct sata_fis_h2d *cfis = &h2d;
+ u8 port = probe_ent->hard_port_no;
+
+ memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis->pm_port_c = 0x80; /* is command */
+ cfis->command = ATA_CMD_FLUSH_EXT;
+
+ ahci_exec_ata_cmd(probe_ent, port, cfis, NULL, 0, 0);
+}
+
+static void dwc_ahsata_init_wcache(int dev, u16 *id)
+{
+ struct ahci_probe_ent *probe_ent =
+ (struct ahci_probe_ent *)sata_dev_desc[dev].priv;
+
+ if (ata_id_has_wcache(id) && ata_id_wcache_enabled(id))
+ probe_ent->flags |= SATA_FLAG_WCACHE;
+ if (ata_id_has_flush(id))
+ probe_ent->flags |= SATA_FLAG_FLUSH;
+ if (ata_id_has_flush_ext(id))
+ probe_ent->flags |= SATA_FLAG_FLUSH_EXT;
+}
+
+u32 ata_low_level_rw_lba48(int dev, u32 blknr, lbaint_t blkcnt,
+ const void *buffer, int is_write)
+{
+ u32 start, blks;
+ u8 *addr;
+ int max_blks;
+
+ start = blknr;
+ blks = blkcnt;
+ addr = (u8 *)buffer;
+
+ max_blks = ATA_MAX_SECTORS_LBA48;
+
+ do {
+ if (blks > max_blks) {
+ if (max_blks != dwc_ahsata_rw_cmd_ext(dev, start,
+ max_blks, addr, is_write))
+ return 0;
+ start += max_blks;
+ blks -= max_blks;
+ addr += ATA_SECT_SIZE * max_blks;
+ } else {
+ if (blks != dwc_ahsata_rw_cmd_ext(dev, start,
+ blks, addr, is_write))
+ return 0;
+ start += blks;
+ blks = 0;
+ addr += ATA_SECT_SIZE * blks;
+ }
+ } while (blks != 0);
+
+ return blkcnt;
+}
+
+u32 ata_low_level_rw_lba28(int dev, u32 blknr, lbaint_t blkcnt,
+ const void *buffer, int is_write)
+{
+ u32 start, blks;
+ u8 *addr;
+ int max_blks;
+
+ start = blknr;
+ blks = blkcnt;
+ addr = (u8 *)buffer;
+
+ max_blks = ATA_MAX_SECTORS;
+ do {
+ if (blks > max_blks) {
+ if (max_blks != dwc_ahsata_rw_cmd(dev, start,
+ max_blks, addr, is_write))
+ return 0;
+ start += max_blks;
+ blks -= max_blks;
+ addr += ATA_SECT_SIZE * max_blks;
+ } else {
+ if (blks != dwc_ahsata_rw_cmd(dev, start,
+ blks, addr, is_write))
+ return 0;
+ start += blks;
+ blks = 0;
+ addr += ATA_SECT_SIZE * blks;
+ }
+ } while (blks != 0);
+
+ return blkcnt;
+}
+
+int sata_port_status(int dev, int port)
+{
+ struct sata_port_regs *port_mmio;
+ struct ahci_probe_ent *probe_ent = NULL;
+
+ if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1))
+ return -EINVAL;
+
+ if (sata_dev_desc[dev].priv == NULL)
+ return -ENODEV;
+
+ probe_ent = (struct ahci_probe_ent *)sata_dev_desc[dev].priv;
+ port_mmio = (struct sata_port_regs *)probe_ent->port[port].port_mmio;
+
+ return readl(&(port_mmio->ssts)) & SATA_PORT_SSTS_DET_MASK;
+}
+
+/*
+ * SATA interface between low level driver and command layer
+ */
+ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer)
+{
+ u32 rc;
+
+ if (sata_dev_desc[dev].lba48)
+ rc = ata_low_level_rw_lba48(dev, blknr, blkcnt,
+ buffer, READ_CMD);
+ else
+ rc = ata_low_level_rw_lba28(dev, blknr, blkcnt,
+ buffer, READ_CMD);
+ return rc;
+}
+
+ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer)
+{
+ u32 rc;
+ struct ahci_probe_ent *probe_ent =
+ (struct ahci_probe_ent *)sata_dev_desc[dev].priv;
+ u32 flags = probe_ent->flags;
+
+ if (sata_dev_desc[dev].lba48) {
+ rc = ata_low_level_rw_lba48(dev, blknr, blkcnt,
+ buffer, WRITE_CMD);
+ if ((flags & SATA_FLAG_WCACHE) &&
+ (flags & SATA_FLAG_FLUSH_EXT))
+ dwc_ahsata_flush_cache_ext(dev);
+ } else {
+ rc = ata_low_level_rw_lba28(dev, blknr, blkcnt,
+ buffer, WRITE_CMD);
+ if ((flags & SATA_FLAG_WCACHE) &&
+ (flags & SATA_FLAG_FLUSH))
+ dwc_ahsata_flush_cache(dev);
+ }
+ return rc;
+}
+
+int scan_sata(int dev)
+{
+ u8 serial[ATA_ID_SERNO_LEN + 1] = { 0 };
+ u8 firmware[ATA_ID_FW_REV_LEN + 1] = { 0 };
+ u8 product[ATA_ID_PROD_LEN + 1] = { 0 };
+ u16 *id;
+ u64 n_sectors;
+ struct ahci_probe_ent *probe_ent =
+ (struct ahci_probe_ent *)sata_dev_desc[dev].priv;
+ u8 port = probe_ent->hard_port_no;
+ struct blk_desc *pdev = &(sata_dev_desc[dev]);
+
+ id = (u16 *)memalign(ARCH_DMA_MINALIGN,
+ roundup(ARCH_DMA_MINALIGN,
+ (ATA_ID_WORDS * 2)));
+ if (!id) {
+ printf("id malloc failed\n\r");
+ return -1;
+ }
+
+ /* Identify device to get information */
+ dwc_ahsata_identify(dev, id);
+
+ /* Serial number */
+ ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial));
+ memcpy(pdev->product, serial, sizeof(serial));
+
+ /* Firmware version */
+ ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware));
+ memcpy(pdev->revision, firmware, sizeof(firmware));
+
+ /* Product model */
+ ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product));
+ memcpy(pdev->vendor, product, sizeof(product));
+
+ /* Totoal sectors */
+ n_sectors = ata_id_n_sectors(id);
+ pdev->lba = (u32)n_sectors;
+
+ pdev->type = DEV_TYPE_HARDDISK;
+ pdev->blksz = ATA_SECT_SIZE;
+ pdev->lun = 0 ;
+
+ /* Check if support LBA48 */
+ if (ata_id_has_lba48(id)) {
+ pdev->lba48 = 1;
+ debug("Device support LBA48\n\r");
+ }
+
+ /* Get the NCQ queue depth from device */
+ probe_ent->flags &= (~SATA_FLAG_Q_DEP_MASK);
+ probe_ent->flags |= ata_id_queue_depth(id);
+
+ /* Get the xfer mode from device */
+ dwc_ahsata_xfer_mode(dev, id);
+
+ /* Get the write cache status from device */
+ dwc_ahsata_init_wcache(dev, id);
+
+ /* Set the xfer mode to highest speed */
+ ahci_set_feature(dev, port);
+
+ free((void *)id);
+
+ dwc_ahsata_print_info(dev);
+
+ is_ready = 1;
+
+ return 0;
+}
diff --git a/drivers/ata/dwc_ahsata.h b/drivers/ata/dwc_ahsata.h
new file mode 100644
index 0000000000..caa2e501f9
--- /dev/null
+++ b/drivers/ata/dwc_ahsata.h
@@ -0,0 +1,320 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ * Terry Lv <r65388@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __FSL_SATA_H__
+#define __FSL_SATA_H__
+
+#define DWC_AHSATA_MAX_CMD_SLOTS 32
+
+/* Max host controller numbers */
+#define SATA_HC_MAX_NUM 4
+/* Max command queue depth per host controller */
+#define DWC_AHSATA_HC_MAX_CMD 32
+/* Max port number per host controller */
+#define SATA_HC_MAX_PORT 16
+
+/* Generic Host Register */
+
+/* HBA Capabilities Register */
+#define SATA_HOST_CAP_S64A 0x80000000
+#define SATA_HOST_CAP_SNCQ 0x40000000
+#define SATA_HOST_CAP_SSNTF 0x20000000
+#define SATA_HOST_CAP_SMPS 0x10000000
+#define SATA_HOST_CAP_SSS 0x08000000
+#define SATA_HOST_CAP_SALP 0x04000000
+#define SATA_HOST_CAP_SAL 0x02000000
+#define SATA_HOST_CAP_SCLO 0x01000000
+#define SATA_HOST_CAP_ISS_MASK 0x00f00000
+#define SATA_HOST_CAP_ISS_OFFSET 20
+#define SATA_HOST_CAP_SNZO 0x00080000
+#define SATA_HOST_CAP_SAM 0x00040000
+#define SATA_HOST_CAP_SPM 0x00020000
+#define SATA_HOST_CAP_PMD 0x00008000
+#define SATA_HOST_CAP_SSC 0x00004000
+#define SATA_HOST_CAP_PSC 0x00002000
+#define SATA_HOST_CAP_NCS 0x00001f00
+#define SATA_HOST_CAP_CCCS 0x00000080
+#define SATA_HOST_CAP_EMS 0x00000040
+#define SATA_HOST_CAP_SXS 0x00000020
+#define SATA_HOST_CAP_NP_MASK 0x0000001f
+
+/* Global HBA Control Register */
+#define SATA_HOST_GHC_AE 0x80000000
+#define SATA_HOST_GHC_IE 0x00000002
+#define SATA_HOST_GHC_HR 0x00000001
+
+/* Interrupt Status Register */
+
+/* Ports Implemented Register */
+
+/* AHCI Version Register */
+#define SATA_HOST_VS_MJR_MASK 0xffff0000
+#define SATA_HOST_VS_MJR_OFFSET 16
+#define SATA_HOST_VS_MJR_MNR 0x0000ffff
+
+/* Command Completion Coalescing Control */
+#define SATA_HOST_CCC_CTL_TV_MASK 0xffff0000
+#define SATA_HOST_CCC_CTL_TV_OFFSET 16
+#define SATA_HOST_CCC_CTL_CC_MASK 0x0000ff00
+#define SATA_HOST_CCC_CTL_CC_OFFSET 8
+#define SATA_HOST_CCC_CTL_INT_MASK 0x000000f8
+#define SATA_HOST_CCC_CTL_INT_OFFSET 3
+#define SATA_HOST_CCC_CTL_EN 0x00000001
+
+/* Command Completion Coalescing Ports */
+
+/* HBA Capabilities Extended Register */
+#define SATA_HOST_CAP2_APST 0x00000004
+
+/* BIST Activate FIS Register */
+#define SATA_HOST_BISTAFR_NCP_MASK 0x0000ff00
+#define SATA_HOST_BISTAFR_NCP_OFFSET 8
+#define SATA_HOST_BISTAFR_PD_MASK 0x000000ff
+#define SATA_HOST_BISTAFR_PD_OFFSET 0
+
+/* BIST Control Register */
+#define SATA_HOST_BISTCR_FERLB 0x00100000
+#define SATA_HOST_BISTCR_TXO 0x00040000
+#define SATA_HOST_BISTCR_CNTCLR 0x00020000
+#define SATA_HOST_BISTCR_NEALB 0x00010000
+#define SATA_HOST_BISTCR_LLC_MASK 0x00000700
+#define SATA_HOST_BISTCR_LLC_OFFSET 8
+#define SATA_HOST_BISTCR_ERREN 0x00000040
+#define SATA_HOST_BISTCR_FLIP 0x00000020
+#define SATA_HOST_BISTCR_PV 0x00000010
+#define SATA_HOST_BISTCR_PATTERN_MASK 0x0000000f
+#define SATA_HOST_BISTCR_PATTERN_OFFSET 0
+
+/* BIST FIS Count Register */
+
+/* BIST Status Register */
+#define SATA_HOST_BISTSR_FRAMERR_MASK 0x0000ffff
+#define SATA_HOST_BISTSR_FRAMERR_OFFSET 0
+#define SATA_HOST_BISTSR_BRSTERR_MASK 0x00ff0000
+#define SATA_HOST_BISTSR_BRSTERR_OFFSET 16
+
+/* BIST DWORD Error Count Register */
+
+/* OOB Register*/
+#define SATA_HOST_OOBR_WE 0x80000000
+#define SATA_HOST_OOBR_cwMin_MASK 0x7f000000
+#define SATA_HOST_OOBR_cwMAX_MASK 0x00ff0000
+#define SATA_HOST_OOBR_ciMin_MASK 0x0000ff00
+#define SATA_HOST_OOBR_ciMax_MASK 0x000000ff
+
+/* Timer 1-ms Register */
+
+/* Global Parameter 1 Register */
+#define SATA_HOST_GPARAM1R_ALIGN_M 0x80000000
+#define SATA_HOST_GPARAM1R_RX_BUFFER 0x40000000
+#define SATA_HOST_GPARAM1R_PHY_DATA_MASK 0x30000000
+#define SATA_HOST_GPARAM1R_PHY_RST 0x08000000
+#define SATA_HOST_GPARAM1R_PHY_CTRL_MASK 0x07e00000
+#define SATA_HOST_GPARAM1R_PHY_STAT_MASK 0x001f8000
+#define SATA_HOST_GPARAM1R_LATCH_M 0x00004000
+#define SATA_HOST_GPARAM1R_BIST_M 0x00002000
+#define SATA_HOST_GPARAM1R_PHY_TYPE 0x00001000
+#define SATA_HOST_GPARAM1R_RETURN_ERR 0x00000400
+#define SATA_HOST_GPARAM1R_AHB_ENDIAN_MASK 0x00000300
+#define SATA_HOST_GPARAM1R_S_HADDR 0X00000080
+#define SATA_HOST_GPARAM1R_M_HADDR 0X00000040
+
+/* Global Parameter 2 Register */
+#define SATA_HOST_GPARAM2R_DEV_CP 0x00004000
+#define SATA_HOST_GPARAM2R_DEV_MP 0x00002000
+#define SATA_HOST_GPARAM2R_DEV_ENCODE_M 0x00001000
+#define SATA_HOST_GPARAM2R_RXOOB_CLK_M 0x00000800
+#define SATA_HOST_GPARAM2R_RXOOB_M 0x00000400
+#define SATA_HOST_GPARAM2R_TX_OOB_M 0x00000200
+#define SATA_HOST_GPARAM2R_RXOOB_CLK_MASK 0x000001ff
+
+/* Port Parameter Register */
+#define SATA_HOST_PPARAMR_TX_MEM_M 0x00000200
+#define SATA_HOST_PPARAMR_TX_MEM_S 0x00000100
+#define SATA_HOST_PPARAMR_RX_MEM_M 0x00000080
+#define SATA_HOST_PPARAMR_RX_MEM_S 0x00000040
+#define SATA_HOST_PPARAMR_TXFIFO_DEPTH_MASK 0x00000038
+#define SATA_HOST_PPARAMR_RXFIFO_DEPTH_MASK 0x00000007
+
+/* Test Register */
+#define SATA_HOST_TESTR_PSEL_MASK 0x00070000
+#define SATA_HOST_TESTR_TEST_IF 0x00000001
+
+/* Port Register Descriptions */
+/* Port# Command List Base Address Register */
+#define SATA_PORT_CLB_CLB_MASK 0xfffffc00
+
+/* Port# Command List Base Address Upper 32-Bits Register */
+
+/* Port# FIS Base Address Register */
+#define SATA_PORT_FB_FB_MASK 0xfffffff0
+
+/* Port# FIS Base Address Upper 32-Bits Register */
+
+/* Port# Interrupt Status Register */
+#define SATA_PORT_IS_CPDS 0x80000000
+#define SATA_PORT_IS_TFES 0x40000000
+#define SATA_PORT_IS_HBFS 0x20000000
+#define SATA_PORT_IS_HBDS 0x10000000
+#define SATA_PORT_IS_IFS 0x08000000
+#define SATA_PORT_IS_INFS 0x04000000
+#define SATA_PORT_IS_OFS 0x01000000
+#define SATA_PORT_IS_IPMS 0x00800000
+#define SATA_PORT_IS_PRCS 0x00400000
+#define SATA_PORT_IS_DMPS 0x00000080
+#define SATA_PORT_IS_PCS 0x00000040
+#define SATA_PORT_IS_DPS 0x00000020
+#define SATA_PORT_IS_UFS 0x00000010
+#define SATA_PORT_IS_SDBS 0x00000008
+#define SATA_PORT_IS_DSS 0x00000004
+#define SATA_PORT_IS_PSS 0x00000002
+#define SATA_PORT_IS_DHRS 0x00000001
+
+/* Port# Interrupt Enable Register */
+#define SATA_PORT_IE_CPDE 0x80000000
+#define SATA_PORT_IE_TFEE 0x40000000
+#define SATA_PORT_IE_HBFE 0x20000000
+#define SATA_PORT_IE_HBDE 0x10000000
+#define SATA_PORT_IE_IFE 0x08000000
+#define SATA_PORT_IE_INFE 0x04000000
+#define SATA_PORT_IE_OFE 0x01000000
+#define SATA_PORT_IE_IPME 0x00800000
+#define SATA_PORT_IE_PRCE 0x00400000
+#define SATA_PORT_IE_DMPE 0x00000080
+#define SATA_PORT_IE_PCE 0x00000040
+#define SATA_PORT_IE_DPE 0x00000020
+#define SATA_PORT_IE_UFE 0x00000010
+#define SATA_PORT_IE_SDBE 0x00000008
+#define SATA_PORT_IE_DSE 0x00000004
+#define SATA_PORT_IE_PSE 0x00000002
+#define SATA_PORT_IE_DHRE 0x00000001
+
+/* Port# Command Register */
+#define SATA_PORT_CMD_ICC_MASK 0xf0000000
+#define SATA_PORT_CMD_ASP 0x08000000
+#define SATA_PORT_CMD_ALPE 0x04000000
+#define SATA_PORT_CMD_DLAE 0x02000000
+#define SATA_PORT_CMD_ATAPI 0x01000000
+#define SATA_PORT_CMD_APSTE 0x00800000
+#define SATA_PORT_CMD_ESP 0x00200000
+#define SATA_PORT_CMD_CPD 0x00100000
+#define SATA_PORT_CMD_MPSP 0x00080000
+#define SATA_PORT_CMD_HPCP 0x00040000
+#define SATA_PORT_CMD_PMA 0x00020000
+#define SATA_PORT_CMD_CPS 0x00010000
+#define SATA_PORT_CMD_CR 0x00008000
+#define SATA_PORT_CMD_FR 0x00004000
+#define SATA_PORT_CMD_MPSS 0x00002000
+#define SATA_PORT_CMD_CCS_MASK 0x00001f00
+#define SATA_PORT_CMD_FRE 0x00000010
+#define SATA_PORT_CMD_CLO 0x00000008
+#define SATA_PORT_CMD_POD 0x00000004
+#define SATA_PORT_CMD_SUD 0x00000002
+#define SATA_PORT_CMD_ST 0x00000001
+
+/* Port# Task File Data Register */
+#define SATA_PORT_TFD_ERR_MASK 0x0000ff00
+#define SATA_PORT_TFD_STS_MASK 0x000000ff
+#define SATA_PORT_TFD_STS_ERR 0x00000001
+#define SATA_PORT_TFD_STS_DRQ 0x00000008
+#define SATA_PORT_TFD_STS_BSY 0x00000080
+
+/* Port# Signature Register */
+
+/* Port# Serial ATA Status {SStatus} Register */
+#define SATA_PORT_SSTS_IPM_MASK 0x00000f00
+#define SATA_PORT_SSTS_SPD_MASK 0x000000f0
+#define SATA_PORT_SSTS_DET_MASK 0x0000000f
+
+/* Port# Serial ATA Control {SControl} Register */
+#define SATA_PORT_SCTL_IPM_MASK 0x00000f00
+#define SATA_PORT_SCTL_SPD_MASK 0x000000f0
+#define SATA_PORT_SCTL_DET_MASK 0x0000000f
+
+/* Port# Serial ATA Error {SError} Register */
+#define SATA_PORT_SERR_DIAG_X 0x04000000
+#define SATA_PORT_SERR_DIAG_F 0x02000000
+#define SATA_PORT_SERR_DIAG_T 0x01000000
+#define SATA_PORT_SERR_DIAG_S 0x00800000
+#define SATA_PORT_SERR_DIAG_H 0x00400000
+#define SATA_PORT_SERR_DIAG_C 0x00200000
+#define SATA_PORT_SERR_DIAG_D 0x00100000
+#define SATA_PORT_SERR_DIAG_B 0x00080000
+#define SATA_PORT_SERR_DIAG_W 0x00040000
+#define SATA_PORT_SERR_DIAG_I 0x00020000
+#define SATA_PORT_SERR_DIAG_N 0x00010000
+#define SATA_PORT_SERR_ERR_E 0x00000800
+#define SATA_PORT_SERR_ERR_P 0x00000400
+#define SATA_PORT_SERR_ERR_C 0x00000200
+#define SATA_PORT_SERR_ERR_T 0x00000100
+#define SATA_PORT_SERR_ERR_M 0x00000002
+#define SATA_PORT_SERR_ERR_I 0x00000001
+
+/* Port# Serial ATA Active {SActive} Register */
+
+/* Port# Command Issue Register */
+
+/* Port# Serial ATA Notification Register */
+
+/* Port# DMA Control Register */
+#define SATA_PORT_DMACR_RXABL_MASK 0x0000f000
+#define SATA_PORT_DMACR_TXABL_MASK 0x00000f00
+#define SATA_PORT_DMACR_RXTS_MASK 0x000000f0
+#define SATA_PORT_DMACR_TXTS_MASK 0x0000000f
+
+/* Port# PHY Control Register */
+
+/* Port# PHY Status Register */
+
+#define SATA_HC_CMD_HDR_ENTRY_SIZE sizeof(struct cmd_hdr_entry)
+
+/* DW0
+*/
+#define CMD_HDR_DI_CFL_MASK 0x0000001f
+#define CMD_HDR_DI_CFL_OFFSET 0
+#define CMD_HDR_DI_A 0x00000020
+#define CMD_HDR_DI_W 0x00000040
+#define CMD_HDR_DI_P 0x00000080
+#define CMD_HDR_DI_R 0x00000100
+#define CMD_HDR_DI_B 0x00000200
+#define CMD_HDR_DI_C 0x00000400
+#define CMD_HDR_DI_PMP_MASK 0x0000f000
+#define CMD_HDR_DI_PMP_OFFSET 12
+#define CMD_HDR_DI_PRDTL 0xffff0000
+#define CMD_HDR_DI_PRDTL_OFFSET 16
+
+/* prde_fis_len
+*/
+#define CMD_HDR_PRD_ENTRY_SHIFT 16
+#define CMD_HDR_PRD_ENTRY_MASK 0x003f0000
+#define CMD_HDR_FIS_LEN_SHIFT 2
+
+/* attribute
+*/
+#define CMD_HDR_ATTR_RES 0x00000800 /* Reserved bit, should be 1 */
+#define CMD_HDR_ATTR_VBIST 0x00000400 /* Vendor BIST */
+/* Snoop enable for all descriptor */
+#define CMD_HDR_ATTR_SNOOP 0x00000200
+#define CMD_HDR_ATTR_FPDMA 0x00000100 /* FPDMA queued command */
+#define CMD_HDR_ATTR_RESET 0x00000080 /* Reset - a SRST or device reset */
+/* BIST - require the host to enter BIST mode */
+#define CMD_HDR_ATTR_BIST 0x00000040
+#define CMD_HDR_ATTR_ATAPI 0x00000020 /* ATAPI command */
+#define CMD_HDR_ATTR_TAG 0x0000001f /* TAG mask */
+
+#define FLAGS_DMA 0x00000000
+#define FLAGS_FPDMA 0x00000001
+
+#define SATA_FLAG_Q_DEP_MASK 0x0000000f
+#define SATA_FLAG_WCACHE 0x00000100
+#define SATA_FLAG_FLUSH 0x00000200
+#define SATA_FLAG_FLUSH_EXT 0x00000400
+
+#define READ_CMD 0
+#define WRITE_CMD 1
+
+#endif /* __FSL_SATA_H__ */
diff --git a/drivers/ata/fsl_sata.c b/drivers/ata/fsl_sata.c
new file mode 100644
index 0000000000..31f7fab8b4
--- /dev/null
+++ b/drivers/ata/fsl_sata.c
@@ -0,0 +1,854 @@
+/*
+ * Copyright (C) 2008,2010 Freescale Semiconductor, Inc.
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <console.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/fsl_serdes.h>
+#include <malloc.h>
+#include <libata.h>
+#include <fis.h>
+#include <sata.h>
+#include "fsl_sata.h"
+
+#ifndef CONFIG_SYS_SATA1_FLAGS
+ #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
+#endif
+#ifndef CONFIG_SYS_SATA2_FLAGS
+ #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
+#endif
+
+static struct fsl_sata_info fsl_sata_info[] = {
+#ifdef CONFIG_SATA1
+ {CONFIG_SYS_SATA1, CONFIG_SYS_SATA1_FLAGS},
+#else
+ {0, 0},
+#endif
+#ifdef CONFIG_SATA2
+ {CONFIG_SYS_SATA2, CONFIG_SYS_SATA2_FLAGS},
+#else
+ {0, 0},
+#endif
+};
+
+static inline void sdelay(unsigned long sec)
+{
+ unsigned long i;
+ for (i = 0; i < sec; i++)
+ mdelay(1000);
+}
+
+static void fsl_sata_dump_sfis(struct sata_fis_d2h *s)
+{
+ printf("Status FIS dump:\n\r");
+ printf("fis_type: %02x\n\r", s->fis_type);
+ printf("pm_port_i: %02x\n\r", s->pm_port_i);
+ printf("status: %02x\n\r", s->status);
+ printf("error: %02x\n\r", s->error);
+ printf("lba_low: %02x\n\r", s->lba_low);
+ printf("lba_mid: %02x\n\r", s->lba_mid);
+ printf("lba_high: %02x\n\r", s->lba_high);
+ printf("device: %02x\n\r", s->device);
+ printf("lba_low_exp: %02x\n\r", s->lba_low_exp);
+ printf("lba_mid_exp: %02x\n\r", s->lba_mid_exp);
+ printf("lba_high_exp: %02x\n\r", s->lba_high_exp);
+ printf("res1: %02x\n\r", s->res1);
+ printf("sector_count: %02x\n\r", s->sector_count);
+ printf("sector_count_exp: %02x\n\r", s->sector_count_exp);
+}
+
+static int ata_wait_register(unsigned __iomem *addr, u32 mask,
+ u32 val, u32 timeout_msec)
+{
+ int i;
+ u32 temp;
+
+ for (i = 0; (((temp = in_le32(addr)) & mask) != val)
+ && i < timeout_msec; i++)
+ mdelay(1);
+ return (i < timeout_msec) ? 0 : -1;
+}
+
+int init_sata(int dev)
+{
+ u32 length, align;
+ cmd_hdr_tbl_t *cmd_hdr;
+ u32 cda;
+ u32 val32;
+ fsl_sata_reg_t __iomem *reg;
+ u32 sig;
+ int i;
+ fsl_sata_t *sata;
+
+ if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
+ printf("the sata index %d is out of ranges\n\r", dev);
+ return -1;
+ }
+
+#ifdef CONFIG_MPC85xx
+ if ((dev == 0) && (!is_serdes_configured(SATA1))) {
+ printf("SATA%d [dev = %d] is not enabled\n", dev+1, dev);
+ return -1;
+ }
+ if ((dev == 1) && (!is_serdes_configured(SATA2))) {
+ printf("SATA%d [dev = %d] is not enabled\n", dev+1, dev);
+ return -1;
+ }
+#endif
+
+ /* Allocate SATA device driver struct */
+ sata = (fsl_sata_t *)malloc(sizeof(fsl_sata_t));
+ if (!sata) {
+ printf("alloc the sata device struct failed\n\r");
+ return -1;
+ }
+ /* Zero all of the device driver struct */
+ memset((void *)sata, 0, sizeof(fsl_sata_t));
+
+ /* Save the private struct to block device struct */
+ sata_dev_desc[dev].priv = (void *)sata;
+
+ snprintf(sata->name, 12, "SATA%d", dev);
+
+ /* Set the controller register base address to device struct */
+ reg = (fsl_sata_reg_t *)(fsl_sata_info[dev].sata_reg_base);
+ sata->reg_base = reg;
+
+ /* Allocate the command header table, 4 bytes aligned */
+ length = sizeof(struct cmd_hdr_tbl);
+ align = SATA_HC_CMD_HDR_TBL_ALIGN;
+ sata->cmd_hdr_tbl_offset = (void *)malloc(length + align);
+ if (!sata->cmd_hdr_tbl_offset) {
+ printf("alloc the command header failed\n\r");
+ return -1;
+ }
+
+ cmd_hdr = (cmd_hdr_tbl_t *)(((u32)sata->cmd_hdr_tbl_offset + align)
+ & ~(align - 1));
+ sata->cmd_hdr = cmd_hdr;
+
+ /* Zero all of the command header table */
+ memset((void *)sata->cmd_hdr_tbl_offset, 0, length + align);
+
+ /* Allocate command descriptor for all command */
+ length = sizeof(struct cmd_desc) * SATA_HC_MAX_CMD;
+ align = SATA_HC_CMD_DESC_ALIGN;
+ sata->cmd_desc_offset = (void *)malloc(length + align);
+ if (!sata->cmd_desc_offset) {
+ printf("alloc the command descriptor failed\n\r");
+ return -1;
+ }
+ sata->cmd_desc = (cmd_desc_t *)(((u32)sata->cmd_desc_offset + align)
+ & ~(align - 1));
+ /* Zero all of command descriptor */
+ memset((void *)sata->cmd_desc_offset, 0, length + align);
+
+ /* Link the command descriptor to command header */
+ for (i = 0; i < SATA_HC_MAX_CMD; i++) {
+ cda = ((u32)sata->cmd_desc + SATA_HC_CMD_DESC_SIZE * i)
+ & ~(CMD_HDR_CDA_ALIGN - 1);
+ cmd_hdr->cmd_slot[i].cda = cpu_to_le32(cda);
+ }
+
+ /* To have safe state, force the controller offline */
+ val32 = in_le32(&reg->hcontrol);
+ val32 &= ~HCONTROL_ONOFF;
+ val32 |= HCONTROL_FORCE_OFFLINE;
+ out_le32(&reg->hcontrol, val32);
+
+ /* Wait the controller offline */
+ ata_wait_register(&reg->hstatus, HSTATUS_ONOFF, 0, 1000);
+
+ /* Set the command header base address to CHBA register to tell DMA */
+ out_le32(&reg->chba, (u32)cmd_hdr & ~0x3);
+
+ /* Snoop for the command header */
+ val32 = in_le32(&reg->hcontrol);
+ val32 |= HCONTROL_HDR_SNOOP;
+ out_le32(&reg->hcontrol, val32);
+
+ /* Disable all of interrupts */
+ val32 = in_le32(&reg->hcontrol);
+ val32 &= ~HCONTROL_INT_EN_ALL;
+ out_le32(&reg->hcontrol, val32);
+
+ /* Clear all of interrupts */
+ val32 = in_le32(&reg->hstatus);
+ out_le32(&reg->hstatus, val32);
+
+ /* Set the ICC, no interrupt coalescing */
+ out_le32(&reg->icc, 0x01000000);
+
+ /* No PM attatched, the SATA device direct connect */
+ out_le32(&reg->cqpmp, 0);
+
+ /* Clear SError register */
+ val32 = in_le32(&reg->serror);
+ out_le32(&reg->serror, val32);
+
+ /* Clear CER register */
+ val32 = in_le32(&reg->cer);
+ out_le32(&reg->cer, val32);
+
+ /* Clear DER register */
+ val32 = in_le32(&reg->der);
+ out_le32(&reg->der, val32);
+
+ /* No device detection or initialization action requested */
+ out_le32(&reg->scontrol, 0x00000300);
+
+ /* Configure the transport layer, default value */
+ out_le32(&reg->transcfg, 0x08000016);
+
+ /* Configure the link layer, default value */
+ out_le32(&reg->linkcfg, 0x0000ff34);
+
+ /* Bring the controller online */
+ val32 = in_le32(&reg->hcontrol);
+ val32 |= HCONTROL_ONOFF;
+ out_le32(&reg->hcontrol, val32);
+
+ mdelay(100);
+
+ /* print sata device name */
+ if (!dev)
+ printf("%s ", sata->name);
+ else
+ printf(" %s ", sata->name);
+
+ /* Wait PHY RDY signal changed for 500ms */
+ ata_wait_register(&reg->hstatus, HSTATUS_PHY_RDY,
+ HSTATUS_PHY_RDY, 500);
+
+ /* Check PHYRDY */
+ val32 = in_le32(&reg->hstatus);
+ if (val32 & HSTATUS_PHY_RDY) {
+ sata->link = 1;
+ } else {
+ sata->link = 0;
+ printf("(No RDY)\n\r");
+ return -1;
+ }
+
+ /* Wait for signature updated, which is 1st D2H */
+ ata_wait_register(&reg->hstatus, HSTATUS_SIGNATURE,
+ HSTATUS_SIGNATURE, 10000);
+
+ if (val32 & HSTATUS_SIGNATURE) {
+ sig = in_le32(&reg->sig);
+ debug("Signature updated, the sig =%08x\n\r", sig);
+ sata->ata_device_type = ata_dev_classify(sig);
+ }
+
+ /* Check the speed */
+ val32 = in_le32(&reg->sstatus);
+ if ((val32 & SSTATUS_SPD_MASK) == SSTATUS_SPD_GEN1)
+ printf("(1.5 Gbps)\n\r");
+ else if ((val32 & SSTATUS_SPD_MASK) == SSTATUS_SPD_GEN2)
+ printf("(3 Gbps)\n\r");
+
+ return 0;
+}
+
+int reset_sata(int dev)
+{
+ return 0;
+}
+
+static void fsl_sata_dump_regs(fsl_sata_reg_t __iomem *reg)
+{
+ printf("\n\rSATA: %08x\n\r", (u32)reg);
+ printf("CQR: %08x\n\r", in_le32(&reg->cqr));
+ printf("CAR: %08x\n\r", in_le32(&reg->car));
+ printf("CCR: %08x\n\r", in_le32(&reg->ccr));
+ printf("CER: %08x\n\r", in_le32(&reg->cer));
+ printf("CQR: %08x\n\r", in_le32(&reg->cqr));
+ printf("DER: %08x\n\r", in_le32(&reg->der));
+ printf("CHBA: %08x\n\r", in_le32(&reg->chba));
+ printf("HStatus: %08x\n\r", in_le32(&reg->hstatus));
+ printf("HControl: %08x\n\r", in_le32(&reg->hcontrol));
+ printf("CQPMP: %08x\n\r", in_le32(&reg->cqpmp));
+ printf("SIG: %08x\n\r", in_le32(&reg->sig));
+ printf("ICC: %08x\n\r", in_le32(&reg->icc));
+ printf("SStatus: %08x\n\r", in_le32(&reg->sstatus));
+ printf("SError: %08x\n\r", in_le32(&reg->serror));
+ printf("SControl: %08x\n\r", in_le32(&reg->scontrol));
+ printf("SNotification: %08x\n\r", in_le32(&reg->snotification));
+ printf("TransCfg: %08x\n\r", in_le32(&reg->transcfg));
+ printf("TransStatus: %08x\n\r", in_le32(&reg->transstatus));
+ printf("LinkCfg: %08x\n\r", in_le32(&reg->linkcfg));
+ printf("LinkCfg1: %08x\n\r", in_le32(&reg->linkcfg1));
+ printf("LinkCfg2: %08x\n\r", in_le32(&reg->linkcfg2));
+ printf("LinkStatus: %08x\n\r", in_le32(&reg->linkstatus));
+ printf("LinkStatus1: %08x\n\r", in_le32(&reg->linkstatus1));
+ printf("PhyCtrlCfg: %08x\n\r", in_le32(&reg->phyctrlcfg));
+ printf("SYSPR: %08x\n\r", in_be32(&reg->syspr));
+}
+
+static int fsl_ata_exec_ata_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis,
+ int is_ncq, int tag, u8 *buffer, u32 len)
+{
+ cmd_hdr_entry_t *cmd_hdr;
+ cmd_desc_t *cmd_desc;
+ sata_fis_h2d_t *h2d;
+ prd_entry_t *prde;
+ u32 ext_c_ddc;
+ u32 prde_count;
+ u32 val32;
+ u32 ttl;
+ fsl_sata_reg_t __iomem *reg = sata->reg_base;
+ int i;
+
+ /* Check xfer length */
+ if (len > SATA_HC_MAX_XFER_LEN) {
+ printf("max transfer length is 64MB\n\r");
+ return 0;
+ }
+
+ /* Setup the command descriptor */
+ cmd_desc = sata->cmd_desc + tag;
+
+ /* Get the pointer cfis of command descriptor */
+ h2d = (sata_fis_h2d_t *)cmd_desc->cfis;
+
+ /* Zero the cfis of command descriptor */
+ memset((void *)h2d, 0, SATA_HC_CMD_DESC_CFIS_SIZE);
+
+ /* Copy the cfis from user to command descriptor */
+ h2d->fis_type = cfis->fis_type;
+ h2d->pm_port_c = cfis->pm_port_c;
+ h2d->command = cfis->command;
+
+ h2d->features = cfis->features;
+ h2d->features_exp = cfis->features_exp;
+
+ h2d->lba_low = cfis->lba_low;
+ h2d->lba_mid = cfis->lba_mid;
+ h2d->lba_high = cfis->lba_high;
+ h2d->lba_low_exp = cfis->lba_low_exp;
+ h2d->lba_mid_exp = cfis->lba_mid_exp;
+ h2d->lba_high_exp = cfis->lba_high_exp;
+
+ if (!is_ncq) {
+ h2d->sector_count = cfis->sector_count;
+ h2d->sector_count_exp = cfis->sector_count_exp;
+ } else { /* NCQ */
+ h2d->sector_count = (u8)(tag << 3);
+ }
+
+ h2d->device = cfis->device;
+ h2d->control = cfis->control;
+
+ /* Setup the PRD table */
+ prde = (prd_entry_t *)cmd_desc->prdt;
+ memset((void *)prde, 0, sizeof(struct prdt));
+
+ prde_count = 0;
+ ttl = len;
+ for (i = 0; i < SATA_HC_MAX_PRD_DIRECT; i++) {
+ if (!len)
+ break;
+ prde->dba = cpu_to_le32((u32)buffer & ~0x3);
+ debug("dba = %08x\n\r", (u32)buffer);
+
+ if (len < PRD_ENTRY_MAX_XFER_SZ) {
+ ext_c_ddc = PRD_ENTRY_DATA_SNOOP | len;
+ debug("ext_c_ddc1 = %08x, len = %08x\n\r", ext_c_ddc, len);
+ prde->ext_c_ddc = cpu_to_le32(ext_c_ddc);
+ prde_count++;
+ prde++;
+ break;
+ } else {
+ ext_c_ddc = PRD_ENTRY_DATA_SNOOP; /* 4M bytes */
+ debug("ext_c_ddc2 = %08x, len = %08x\n\r", ext_c_ddc, len);
+ prde->ext_c_ddc = cpu_to_le32(ext_c_ddc);
+ buffer += PRD_ENTRY_MAX_XFER_SZ;
+ len -= PRD_ENTRY_MAX_XFER_SZ;
+ prde_count++;
+ prde++;
+ }
+ }
+
+ /* Setup the command slot of cmd hdr */
+ cmd_hdr = (cmd_hdr_entry_t *)&sata->cmd_hdr->cmd_slot[tag];
+
+ cmd_hdr->cda = cpu_to_le32((u32)cmd_desc & ~0x3);
+
+ val32 = prde_count << CMD_HDR_PRD_ENTRY_SHIFT;
+ val32 |= sizeof(sata_fis_h2d_t);
+ cmd_hdr->prde_fis_len = cpu_to_le32(val32);
+
+ cmd_hdr->ttl = cpu_to_le32(ttl);
+
+ if (!is_ncq) {
+ val32 = CMD_HDR_ATTR_RES | CMD_HDR_ATTR_SNOOP;
+ } else {
+ val32 = CMD_HDR_ATTR_RES | CMD_HDR_ATTR_SNOOP | CMD_HDR_ATTR_FPDMA;
+ }
+
+ tag &= CMD_HDR_ATTR_TAG;
+ val32 |= tag;
+
+ debug("attribute = %08x\n\r", val32);
+ cmd_hdr->attribute = cpu_to_le32(val32);
+
+ /* Make sure cmd desc and cmd slot valid before command issue */
+ sync();
+
+ /* PMP*/
+ val32 = (u32)(h2d->pm_port_c & 0x0f);
+ out_le32(&reg->cqpmp, val32);
+
+ /* Wait no active */
+ if (ata_wait_register(&reg->car, (1 << tag), 0, 10000))
+ printf("Wait no active time out\n\r");
+
+ /* Issue command */
+ if (!(in_le32(&reg->cqr) & (1 << tag))) {
+ val32 = 1 << tag;
+ out_le32(&reg->cqr, val32);
+ }
+
+ /* Wait command completed for 10s */
+ if (ata_wait_register(&reg->ccr, (1 << tag), (1 << tag), 10000)) {
+ if (!is_ncq)
+ printf("Non-NCQ command time out\n\r");
+ else
+ printf("NCQ command time out\n\r");
+ }
+
+ val32 = in_le32(&reg->cer);
+
+ if (val32) {
+ u32 der;
+ fsl_sata_dump_sfis((struct sata_fis_d2h *)cmd_desc->sfis);
+ printf("CE at device\n\r");
+ fsl_sata_dump_regs(reg);
+ der = in_le32(&reg->der);
+ out_le32(&reg->cer, val32);
+ out_le32(&reg->der, der);
+ }
+
+ /* Clear complete flags */
+ val32 = in_le32(&reg->ccr);
+ out_le32(&reg->ccr, val32);
+
+ return len;
+}
+
+static int fsl_ata_exec_reset_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis,
+ int tag, u8 *buffer, u32 len)
+{
+ return 0;
+}
+
+static int fsl_sata_exec_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis,
+ enum cmd_type command_type, int tag, u8 *buffer, u32 len)
+{
+ int rc;
+
+ if (tag > SATA_HC_MAX_CMD || tag < 0) {
+ printf("tag is out of range, tag=%d\n\r", tag);
+ return -1;
+ }
+
+ switch (command_type) {
+ case CMD_ATA:
+ rc = fsl_ata_exec_ata_cmd(sata, cfis, 0, tag, buffer, len);
+ return rc;
+ case CMD_RESET:
+ rc = fsl_ata_exec_reset_cmd(sata, cfis, tag, buffer, len);
+ return rc;
+ case CMD_NCQ:
+ rc = fsl_ata_exec_ata_cmd(sata, cfis, 1, tag, buffer, len);
+ return rc;
+ case CMD_ATAPI:
+ case CMD_VENDOR_BIST:
+ case CMD_BIST:
+ printf("not support now\n\r");
+ return -1;
+ default:
+ break;
+ }
+
+ return -1;
+}
+
+static void fsl_sata_identify(int dev, u16 *id)
+{
+ fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
+ struct sata_fis_h2d h2d, *cfis = &h2d;
+
+ memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis->pm_port_c = 0x80; /* is command */
+ cfis->command = ATA_CMD_ID_ATA;
+
+ fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, (u8 *)id, ATA_ID_WORDS * 2);
+ ata_swap_buf_le16(id, ATA_ID_WORDS);
+}
+
+static void fsl_sata_xfer_mode(int dev, u16 *id)
+{
+ fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
+
+ sata->pio = id[ATA_ID_PIO_MODES];
+ sata->mwdma = id[ATA_ID_MWDMA_MODES];
+ sata->udma = id[ATA_ID_UDMA_MODES];
+ debug("pio %04x, mwdma %04x, udma %04x\n\r", sata->pio, sata->mwdma, sata->udma);
+}
+
+static void fsl_sata_set_features(int dev)
+{
+ fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
+ struct sata_fis_h2d h2d, *cfis = &h2d;
+ u8 udma_cap;
+
+ memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis->pm_port_c = 0x80; /* is command */
+ cfis->command = ATA_CMD_SET_FEATURES;
+ cfis->features = SETFEATURES_XFER;
+
+ /* First check the device capablity */
+ udma_cap = (u8)(sata->udma & 0xff);
+ debug("udma_cap %02x\n\r", udma_cap);
+
+ if (udma_cap == ATA_UDMA6)
+ cfis->sector_count = XFER_UDMA_6;
+ if (udma_cap == ATA_UDMA5)
+ cfis->sector_count = XFER_UDMA_5;
+ if (udma_cap == ATA_UDMA4)
+ cfis->sector_count = XFER_UDMA_4;
+ if (udma_cap == ATA_UDMA3)
+ cfis->sector_count = XFER_UDMA_3;
+
+ fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
+}
+
+static u32 fsl_sata_rw_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_write)
+{
+ fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
+ struct sata_fis_h2d h2d, *cfis = &h2d;
+ u32 block;
+
+ block = start;
+
+ memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis->pm_port_c = 0x80; /* is command */
+ cfis->command = (is_write) ? ATA_CMD_WRITE : ATA_CMD_READ;
+ cfis->device = ATA_LBA;
+
+ cfis->device |= (block >> 24) & 0xf;
+ cfis->lba_high = (block >> 16) & 0xff;
+ cfis->lba_mid = (block >> 8) & 0xff;
+ cfis->lba_low = block & 0xff;
+ cfis->sector_count = (u8)(blkcnt & 0xff);
+
+ fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, buffer, ATA_SECT_SIZE * blkcnt);
+ return blkcnt;
+}
+
+static void fsl_sata_flush_cache(int dev)
+{
+ fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
+ struct sata_fis_h2d h2d, *cfis = &h2d;
+
+ memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis->pm_port_c = 0x80; /* is command */
+ cfis->command = ATA_CMD_FLUSH;
+
+ fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
+}
+
+static u32 fsl_sata_rw_cmd_ext(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_write)
+{
+ fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
+ struct sata_fis_h2d h2d, *cfis = &h2d;
+ u64 block;
+
+ block = (u64)start;
+
+ memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis->pm_port_c = 0x80; /* is command */
+
+ cfis->command = (is_write) ? ATA_CMD_WRITE_EXT
+ : ATA_CMD_READ_EXT;
+
+ cfis->lba_high_exp = (block >> 40) & 0xff;
+ cfis->lba_mid_exp = (block >> 32) & 0xff;
+ cfis->lba_low_exp = (block >> 24) & 0xff;
+ cfis->lba_high = (block >> 16) & 0xff;
+ cfis->lba_mid = (block >> 8) & 0xff;
+ cfis->lba_low = block & 0xff;
+ cfis->device = ATA_LBA;
+ cfis->sector_count_exp = (blkcnt >> 8) & 0xff;
+ cfis->sector_count = blkcnt & 0xff;
+
+ fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, buffer, ATA_SECT_SIZE * blkcnt);
+ return blkcnt;
+}
+
+static u32 fsl_sata_rw_ncq_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer,
+ int is_write)
+{
+ fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
+ struct sata_fis_h2d h2d, *cfis = &h2d;
+ int ncq_channel;
+ u64 block;
+
+ if (sata->lba48 != 1) {
+ printf("execute FPDMA command on non-LBA48 hard disk\n\r");
+ return -1;
+ }
+
+ block = (u64)start;
+
+ memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis->pm_port_c = 0x80; /* is command */
+
+ cfis->command = (is_write) ? ATA_CMD_FPDMA_WRITE
+ : ATA_CMD_FPDMA_READ;
+
+ cfis->lba_high_exp = (block >> 40) & 0xff;
+ cfis->lba_mid_exp = (block >> 32) & 0xff;
+ cfis->lba_low_exp = (block >> 24) & 0xff;
+ cfis->lba_high = (block >> 16) & 0xff;
+ cfis->lba_mid = (block >> 8) & 0xff;
+ cfis->lba_low = block & 0xff;
+
+ cfis->device = ATA_LBA;
+ cfis->features_exp = (blkcnt >> 8) & 0xff;
+ cfis->features = blkcnt & 0xff;
+
+ if (sata->queue_depth >= SATA_HC_MAX_CMD)
+ ncq_channel = SATA_HC_MAX_CMD - 1;
+ else
+ ncq_channel = sata->queue_depth - 1;
+
+ /* Use the latest queue */
+ fsl_sata_exec_cmd(sata, cfis, CMD_NCQ, ncq_channel, buffer, ATA_SECT_SIZE * blkcnt);
+ return blkcnt;
+}
+
+static void fsl_sata_flush_cache_ext(int dev)
+{
+ fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
+ struct sata_fis_h2d h2d, *cfis = &h2d;
+
+ memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis->pm_port_c = 0x80; /* is command */
+ cfis->command = ATA_CMD_FLUSH_EXT;
+
+ fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
+}
+
+static void fsl_sata_init_wcache(int dev, u16 *id)
+{
+ fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
+
+ if (ata_id_has_wcache(id) && ata_id_wcache_enabled(id))
+ sata->wcache = 1;
+ if (ata_id_has_flush(id))
+ sata->flush = 1;
+ if (ata_id_has_flush_ext(id))
+ sata->flush_ext = 1;
+}
+
+static int fsl_sata_get_wcache(int dev)
+{
+ fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
+ return sata->wcache;
+}
+
+static int fsl_sata_get_flush(int dev)
+{
+ fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
+ return sata->flush;
+}
+
+static int fsl_sata_get_flush_ext(int dev)
+{
+ fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
+ return sata->flush_ext;
+}
+
+static u32 ata_low_level_rw_lba48(int dev, u32 blknr, lbaint_t blkcnt,
+ const void *buffer, int is_write)
+{
+ u32 start, blks;
+ u8 *addr;
+ int max_blks;
+
+ start = blknr;
+ blks = blkcnt;
+ addr = (u8 *)buffer;
+
+ max_blks = ATA_MAX_SECTORS_LBA48;
+ do {
+ if (blks > max_blks) {
+ if (fsl_sata_info[dev].flags != FLAGS_FPDMA)
+ fsl_sata_rw_cmd_ext(dev, start, max_blks, addr, is_write);
+ else
+ fsl_sata_rw_ncq_cmd(dev, start, max_blks, addr, is_write);
+ start += max_blks;
+ blks -= max_blks;
+ addr += ATA_SECT_SIZE * max_blks;
+ } else {
+ if (fsl_sata_info[dev].flags != FLAGS_FPDMA)
+ fsl_sata_rw_cmd_ext(dev, start, blks, addr, is_write);
+ else
+ fsl_sata_rw_ncq_cmd(dev, start, blks, addr, is_write);
+ start += blks;
+ blks = 0;
+ addr += ATA_SECT_SIZE * blks;
+ }
+ } while (blks != 0);
+
+ return blkcnt;
+}
+
+static u32 ata_low_level_rw_lba28(int dev, u32 blknr, u32 blkcnt,
+ const void *buffer, int is_write)
+{
+ u32 start, blks;
+ u8 *addr;
+ int max_blks;
+
+ start = blknr;
+ blks = blkcnt;
+ addr = (u8 *)buffer;
+
+ max_blks = ATA_MAX_SECTORS;
+ do {
+ if (blks > max_blks) {
+ fsl_sata_rw_cmd(dev, start, max_blks, addr, is_write);
+ start += max_blks;
+ blks -= max_blks;
+ addr += ATA_SECT_SIZE * max_blks;
+ } else {
+ fsl_sata_rw_cmd(dev, start, blks, addr, is_write);
+ start += blks;
+ blks = 0;
+ addr += ATA_SECT_SIZE * blks;
+ }
+ } while (blks != 0);
+
+ return blkcnt;
+}
+
+/*
+ * SATA interface between low level driver and command layer
+ */
+ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer)
+{
+ u32 rc;
+ fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
+
+ if (sata->lba48)
+ rc = ata_low_level_rw_lba48(dev, blknr, blkcnt, buffer, READ_CMD);
+ else
+ rc = ata_low_level_rw_lba28(dev, blknr, blkcnt, buffer, READ_CMD);
+ return rc;
+}
+
+ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer)
+{
+ u32 rc;
+ fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
+
+ if (sata->lba48) {
+ rc = ata_low_level_rw_lba48(dev, blknr, blkcnt, buffer, WRITE_CMD);
+ if (fsl_sata_get_wcache(dev) && fsl_sata_get_flush_ext(dev))
+ fsl_sata_flush_cache_ext(dev);
+ } else {
+ rc = ata_low_level_rw_lba28(dev, blknr, blkcnt, buffer, WRITE_CMD);
+ if (fsl_sata_get_wcache(dev) && fsl_sata_get_flush(dev))
+ fsl_sata_flush_cache(dev);
+ }
+ return rc;
+}
+
+int scan_sata(int dev)
+{
+ fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
+ unsigned char serial[ATA_ID_SERNO_LEN + 1];
+ unsigned char firmware[ATA_ID_FW_REV_LEN + 1];
+ unsigned char product[ATA_ID_PROD_LEN + 1];
+ u16 *id;
+ u64 n_sectors;
+
+ /* if no detected link */
+ if (!sata->link)
+ return -1;
+
+ id = (u16 *)malloc(ATA_ID_WORDS * 2);
+ if (!id) {
+ printf("id malloc failed\n\r");
+ return -1;
+ }
+
+ /* Identify device to get information */
+ fsl_sata_identify(dev, id);
+
+ /* Serial number */
+ ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial));
+ memcpy(sata_dev_desc[dev].product, serial, sizeof(serial));
+
+ /* Firmware version */
+ ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware));
+ memcpy(sata_dev_desc[dev].revision, firmware, sizeof(firmware));
+
+ /* Product model */
+ ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product));
+ memcpy(sata_dev_desc[dev].vendor, product, sizeof(product));
+
+ /* Totoal sectors */
+ n_sectors = ata_id_n_sectors(id);
+ sata_dev_desc[dev].lba = (u32)n_sectors;
+
+#ifdef CONFIG_LBA48
+ /* Check if support LBA48 */
+ if (ata_id_has_lba48(id)) {
+ sata->lba48 = 1;
+ debug("Device support LBA48\n\r");
+ } else
+ debug("Device supports LBA28\n\r");
+#endif
+
+ /* Get the NCQ queue depth from device */
+ sata->queue_depth = ata_id_queue_depth(id);
+
+ /* Get the xfer mode from device */
+ fsl_sata_xfer_mode(dev, id);
+
+ /* Get the write cache status from device */
+ fsl_sata_init_wcache(dev, id);
+
+ /* Set the xfer mode to highest speed */
+ fsl_sata_set_features(dev);
+#ifdef DEBUG
+ fsl_sata_identify(dev, id);
+ ata_dump_id(id);
+#endif
+ free((void *)id);
+ return 0;
+}
diff --git a/drivers/ata/fsl_sata.h b/drivers/ata/fsl_sata.h
new file mode 100644
index 0000000000..18d679e782
--- /dev/null
+++ b/drivers/ata/fsl_sata.h
@@ -0,0 +1,321 @@
+/*
+ * Copyright (C) 2007-2008 Freescale Semiconductor, Inc.
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __FSL_SATA_H__
+#define __FSL_SATA_H__
+
+#define SATA_HC_MAX_NUM 4 /* Max host controller numbers */
+#define SATA_HC_MAX_CMD 16 /* Max command queue depth per host controller */
+#define SATA_HC_MAX_PORT 16 /* Max port number per host controller */
+
+/*
+* SATA Host Controller Registers
+*/
+typedef struct fsl_sata_reg {
+ /* SATA command registers */
+ u32 cqr; /* Command queue register */
+ u8 res1[0x4];
+ u32 car; /* Command active register */
+ u8 res2[0x4];
+ u32 ccr; /* Command completed register */
+ u8 res3[0x4];
+ u32 cer; /* Command error register */
+ u8 res4[0x4];
+ u32 der; /* Device error register */
+ u32 chba; /* Command header base address */
+ u32 hstatus; /* Host status register */
+ u32 hcontrol; /* Host control register */
+ u32 cqpmp; /* Port number queue register */
+ u32 sig; /* Signature register */
+ u32 icc; /* Interrupt coalescing control register */
+ u8 res5[0xc4];
+
+ /* SATA supperset registers */
+ u32 sstatus; /* SATA interface status register */
+ u32 serror; /* SATA interface error register */
+ u32 scontrol; /* SATA interface control register */
+ u32 snotification; /* SATA interface notification register */
+ u8 res6[0x30];
+
+ /* SATA control status registers */
+ u32 transcfg; /* Transport layer configuration */
+ u32 transstatus; /* Transport layer status */
+ u32 linkcfg; /* Link layer configuration */
+ u32 linkcfg1; /* Link layer configuration1 */
+ u32 linkcfg2; /* Link layer configuration2 */
+ u32 linkstatus; /* Link layer status */
+ u32 linkstatus1; /* Link layer status1 */
+ u32 phyctrlcfg; /* PHY control configuration */
+ u8 res7[0x2b0];
+
+ /* SATA system control registers */
+ u32 syspr; /* System priority register - big endian */
+ u8 res8[0xbec];
+} __attribute__ ((packed)) fsl_sata_reg_t;
+
+/* HStatus register
+*/
+#define HSTATUS_ONOFF 0x80000000 /* Online/offline status */
+#define HSTATUS_FORCE_OFFLINE 0x40000000 /* In process going offline */
+#define HSTATUS_BIST_ERR 0x20000000
+
+/* Fatal error */
+#define HSTATUS_MASTER_ERR 0x00004000
+#define HSTATUS_DATA_UNDERRUN 0x00002000
+#define HSTATUS_DATA_OVERRUN 0x00001000
+#define HSTATUS_CRC_ERR_TX 0x00000800
+#define HSTATUS_CRC_ERR_RX 0x00000400
+#define HSTATUS_FIFO_OVERFLOW_TX 0x00000200
+#define HSTATUS_FIFO_OVERFLOW_RX 0x00000100
+#define HSTATUS_FATAL_ERR_ALL (HSTATUS_MASTER_ERR | \
+ HSTATUS_DATA_UNDERRUN | \
+ HSTATUS_DATA_OVERRUN | \
+ HSTATUS_CRC_ERR_TX | \
+ HSTATUS_CRC_ERR_RX | \
+ HSTATUS_FIFO_OVERFLOW_TX | \
+ HSTATUS_FIFO_OVERFLOW_RX)
+/* Interrupt status */
+#define HSTATUS_FATAL_ERR 0x00000020
+#define HSTATUS_PHY_RDY 0x00000010
+#define HSTATUS_SIGNATURE 0x00000008
+#define HSTATUS_SNOTIFY 0x00000004
+#define HSTATUS_DEVICE_ERR 0x00000002
+#define HSTATUS_CMD_COMPLETE 0x00000001
+
+/* HControl register
+*/
+#define HCONTROL_ONOFF 0x80000000 /* Online or offline request */
+#define HCONTROL_FORCE_OFFLINE 0x40000000 /* Force offline request */
+#define HCONTROL_ENTERPRISE_EN 0x10000000 /* Enterprise mode enabled */
+#define HCONTROL_HDR_SNOOP 0x00000400 /* Command header snoop */
+#define HCONTROL_PMP_ATTACHED 0x00000200 /* Port multiplier attached */
+
+/* Interrupt enable */
+#define HCONTROL_FATAL_ERR 0x00000020
+#define HCONTROL_PHY_RDY 0x00000010
+#define HCONTROL_SIGNATURE 0x00000008
+#define HCONTROL_SNOTIFY 0x00000004
+#define HCONTROL_DEVICE_ERR 0x00000002
+#define HCONTROL_CMD_COMPLETE 0x00000001
+
+#define HCONTROL_INT_EN_ALL (HCONTROL_FATAL_ERR | \
+ HCONTROL_PHY_RDY | \
+ HCONTROL_SIGNATURE | \
+ HCONTROL_SNOTIFY | \
+ HCONTROL_DEVICE_ERR | \
+ HCONTROL_CMD_COMPLETE)
+
+/* SStatus register
+*/
+#define SSTATUS_IPM_MASK 0x00000780
+#define SSTATUS_IPM_NOPRESENT 0x00000000
+#define SSTATUS_IPM_ACTIVE 0x00000080
+#define SSTATUS_IPM_PATIAL 0x00000100
+#define SSTATUS_IPM_SLUMBER 0x00000300
+
+#define SSTATUS_SPD_MASK 0x000000f0
+#define SSTATUS_SPD_GEN1 0x00000010
+#define SSTATUS_SPD_GEN2 0x00000020
+
+#define SSTATUS_DET_MASK 0x0000000f
+#define SSTATUS_DET_NODEVICE 0x00000000
+#define SSTATUS_DET_DISCONNECT 0x00000001
+#define SSTATUS_DET_CONNECT 0x00000003
+#define SSTATUS_DET_PHY_OFFLINE 0x00000004
+
+/* SControl register
+*/
+#define SCONTROL_SPM_MASK 0x0000f000
+#define SCONTROL_SPM_GO_PARTIAL 0x00001000
+#define SCONTROL_SPM_GO_SLUMBER 0x00002000
+#define SCONTROL_SPM_GO_ACTIVE 0x00004000
+
+#define SCONTROL_IPM_MASK 0x00000f00
+#define SCONTROL_IPM_NO_RESTRICT 0x00000000
+#define SCONTROL_IPM_PARTIAL 0x00000100
+#define SCONTROL_IPM_SLUMBER 0x00000200
+#define SCONTROL_IPM_PART_SLUM 0x00000300
+
+#define SCONTROL_SPD_MASK 0x000000f0
+#define SCONTROL_SPD_NO_RESTRICT 0x00000000
+#define SCONTROL_SPD_GEN1 0x00000010
+#define SCONTROL_SPD_GEN2 0x00000020
+
+#define SCONTROL_DET_MASK 0x0000000f
+#define SCONTROL_DET_HRESET 0x00000001
+#define SCONTROL_DET_DISABLE 0x00000004
+
+/* TransCfg register
+*/
+#define TRANSCFG_DFIS_SIZE_SHIFT 16
+#define TRANSCFG_RX_WATER_MARK_MASK 0x0000001f
+
+/* PhyCtrlCfg register
+*/
+#define PHYCTRLCFG_FPRFTI_MASK 0x00000018
+#define PHYCTRLCFG_LOOPBACK_MASK 0x0000000e
+
+/*
+* Command Header Entry
+*/
+typedef struct cmd_hdr_entry {
+ __le32 cda; /* Command Descriptor Address,
+ 4 bytes aligned */
+ __le32 prde_fis_len; /* Number of PRD entries and FIS length */
+ __le32 ttl; /* Total transfer length */
+ __le32 attribute; /* the attribute of command */
+} __attribute__ ((packed)) cmd_hdr_entry_t;
+
+#define SATA_HC_CMD_HDR_ENTRY_SIZE sizeof(struct cmd_hdr_entry)
+
+/* cda
+*/
+#define CMD_HDR_CDA_ALIGN 4
+
+/* prde_fis_len
+*/
+#define CMD_HDR_PRD_ENTRY_SHIFT 16
+#define CMD_HDR_PRD_ENTRY_MASK 0x003f0000
+#define CMD_HDR_FIS_LEN_SHIFT 2
+
+/* attribute
+*/
+#define CMD_HDR_ATTR_RES 0x00000800 /* Reserved bit, should be 1 */
+#define CMD_HDR_ATTR_VBIST 0x00000400 /* Vendor BIST */
+#define CMD_HDR_ATTR_SNOOP 0x00000200 /* Snoop enable for all descriptor */
+#define CMD_HDR_ATTR_FPDMA 0x00000100 /* FPDMA queued command */
+#define CMD_HDR_ATTR_RESET 0x00000080 /* Reset - a SRST or device reset */
+#define CMD_HDR_ATTR_BIST 0x00000040 /* BIST - require the host to enter BIST mode */
+#define CMD_HDR_ATTR_ATAPI 0x00000020 /* ATAPI command */
+#define CMD_HDR_ATTR_TAG 0x0000001f /* TAG mask */
+
+/* command type
+*/
+enum cmd_type {
+ CMD_VENDOR_BIST,
+ CMD_BIST,
+ CMD_RESET, /* SRST or device reset */
+ CMD_ATAPI,
+ CMD_NCQ,
+ CMD_ATA, /* None of all above */
+};
+
+/*
+* Command Header Table
+*/
+typedef struct cmd_hdr_tbl {
+ cmd_hdr_entry_t cmd_slot[SATA_HC_MAX_CMD];
+} __attribute__ ((packed)) cmd_hdr_tbl_t;
+
+#define SATA_HC_CMD_HDR_TBL_SIZE sizeof(struct cmd_hdr_tbl)
+#define SATA_HC_CMD_HDR_TBL_ALIGN 4
+
+/*
+* PRD entry - Physical Region Descriptor entry
+*/
+typedef struct prd_entry {
+ __le32 dba; /* Data base address, 4 bytes aligned */
+ u32 res1;
+ u32 res2;
+ __le32 ext_c_ddc; /* Indirect PRD flags, snoop and data word count */
+} __attribute__ ((packed)) prd_entry_t;
+
+#define SATA_HC_CMD_DESC_PRD_SIZE sizeof(struct prd_entry)
+
+/* dba
+*/
+#define PRD_ENTRY_DBA_ALIGN 4
+
+/* ext_c_ddc
+*/
+#define PRD_ENTRY_EXT 0x80000000 /* extension flag */
+#ifdef CONFIG_FSL_SATA_V2
+#define PRD_ENTRY_DATA_SNOOP 0x10000000 /* Data snoop enable */
+#else
+#define PRD_ENTRY_DATA_SNOOP 0x00400000 /* Data snoop enable */
+#endif
+#define PRD_ENTRY_LEN_MASK 0x003fffff /* Data word count */
+
+#define PRD_ENTRY_MAX_XFER_SZ (PRD_ENTRY_LEN_MASK + 1)
+
+/*
+ * This SATA host controller supports a max of 16 direct PRD entries, but if use
+ * chained indirect PRD entries, then the contollers supports upto a max of 63
+ * entries including direct and indirect PRD entries.
+ * The PRDT is an array of 63 PRD entries contigiously, but the PRD entries#15
+ * will be setup as an indirect descriptor, pointing to it's next (contigious)
+ * PRD entries#16.
+ */
+#define SATA_HC_MAX_PRD 63 /* Max PRD entry numbers per command */
+#define SATA_HC_MAX_PRD_DIRECT 16 /* Direct PRDT entries */
+#define SATA_HC_MAX_PRD_USABLE (SATA_HC_MAX_PRD - 1)
+#define SATA_HC_MAX_XFER_LEN 0x4000000
+
+/*
+* PRDT - Physical Region Descriptor Table
+*/
+typedef struct prdt {
+ prd_entry_t prdt[SATA_HC_MAX_PRD];
+} __attribute__ ((packed)) prdt_t;
+
+/*
+* Command Descriptor
+*/
+#define SATA_HC_CMD_DESC_CFIS_SIZE 32 /* bytes */
+#define SATA_HC_CMD_DESC_SFIS_SIZE 32 /* bytes */
+#define SATA_HC_CMD_DESC_ACMD_SIZE 16 /* bytes */
+#define SATA_HC_CMD_DESC_RES 16 /* bytes */
+
+typedef struct cmd_desc {
+ u8 cfis[SATA_HC_CMD_DESC_CFIS_SIZE];
+ u8 sfis[SATA_HC_CMD_DESC_SFIS_SIZE];
+ u8 acmd[SATA_HC_CMD_DESC_ACMD_SIZE];
+ u8 res[SATA_HC_CMD_DESC_RES];
+ prd_entry_t prdt[SATA_HC_MAX_PRD];
+} __attribute__ ((packed)) cmd_desc_t;
+
+#define SATA_HC_CMD_DESC_SIZE sizeof(struct cmd_desc)
+#define SATA_HC_CMD_DESC_ALIGN 4
+
+/*
+ * SATA device driver info
+ */
+typedef struct fsl_sata_info {
+ u32 sata_reg_base;
+ u32 flags;
+} fsl_sata_info_t;
+
+#define FLAGS_DMA 0x00000000
+#define FLAGS_FPDMA 0x00000001
+
+/*
+ * SATA device driver struct
+ */
+typedef struct fsl_sata {
+ char name[12];
+ fsl_sata_reg_t *reg_base; /* the base address of controller register */
+ void *cmd_hdr_tbl_offset; /* alloc address of command header table */
+ cmd_hdr_tbl_t *cmd_hdr; /* aligned address of command header table */
+ void *cmd_desc_offset; /* alloc address of command descriptor */
+ cmd_desc_t *cmd_desc; /* aligned address of command descriptor */
+ int link; /* PHY link status */
+ /* device attribute */
+ int ata_device_type; /* device type */
+ int lba48;
+ int queue_depth; /* Max NCQ queue depth */
+ u16 pio;
+ u16 mwdma;
+ u16 udma;
+ int wcache;
+ int flush;
+ int flush_ext;
+} fsl_sata_t;
+
+#define READ_CMD 0
+#define WRITE_CMD 1
+
+#endif /* __FSL_SATA_H__ */
diff --git a/drivers/ata/libata.c b/drivers/ata/libata.c
new file mode 100644
index 0000000000..d684270dcd
--- /dev/null
+++ b/drivers/ata/libata.c
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc.
+ * Dave Liu <daveliu@freescale.com>
+ * port from the libata of linux kernel
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <libata.h>
+
+u64 ata_id_n_sectors(u16 *id)
+{
+ if (ata_id_has_lba(id)) {
+ if (ata_id_has_lba48(id))
+ return ata_id_u64(id, ATA_ID_LBA48_SECTORS);
+ else
+ return ata_id_u32(id, ATA_ID_LBA_SECTORS);
+ } else {
+ return 0;
+ }
+}
+
+u32 ata_dev_classify(u32 sig)
+{
+ u8 lbam, lbah;
+
+ lbam = (sig >> 16) & 0xff;
+ lbah = (sig >> 24) & 0xff;
+
+ if (((lbam == 0) && (lbah == 0)) ||
+ ((lbam == 0x3c) && (lbah == 0xc3)))
+ return ATA_DEV_ATA;
+
+ if ((lbam == 0x14) && (lbah == 0xeb))
+ return ATA_DEV_ATAPI;
+
+ if ((lbam == 0x69) && (lbah == 0x96))
+ return ATA_DEV_PMP;
+
+ return ATA_DEV_UNKNOWN;
+}
+
+static void ata_id_string(const u16 *id, unsigned char *s,
+ unsigned int ofs, unsigned int len)
+{
+ unsigned int c;
+
+ while (len > 0) {
+ c = id[ofs] >> 8;
+ *s = c;
+ s++;
+
+ c = id[ofs] & 0xff;
+ *s = c;
+ s++;
+
+ ofs++;
+ len -= 2;
+ }
+}
+
+void ata_id_c_string(const u16 *id, unsigned char *s,
+ unsigned int ofs, unsigned int len)
+{
+ unsigned char *p;
+
+ ata_id_string(id, s, ofs, len - 1);
+
+ p = s + strnlen((char *)s, len - 1);
+ while (p > s && p[-1] == ' ')
+ p--;
+ *p = '\0';
+}
+
+void ata_dump_id(u16 *id)
+{
+ unsigned char serial[ATA_ID_SERNO_LEN + 1];
+ unsigned char firmware[ATA_ID_FW_REV_LEN + 1];
+ unsigned char product[ATA_ID_PROD_LEN + 1];
+ u64 n_sectors;
+
+ /* Serial number */
+ ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial));
+ printf("S/N: %s\n\r", serial);
+
+ /* Firmware version */
+ ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware));
+ printf("Firmware version: %s\n\r", firmware);
+
+ /* Product model */
+ ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product));
+ printf("Product model number: %s\n\r", product);
+
+ /* Total sectors of device */
+ n_sectors = ata_id_n_sectors(id);
+ printf("Capablity: %lld sectors\n\r", n_sectors);
+
+ printf ("id[49]: capabilities = 0x%04x\n"
+ "id[53]: field valid = 0x%04x\n"
+ "id[63]: mwdma = 0x%04x\n"
+ "id[64]: pio = 0x%04x\n"
+ "id[75]: queue depth = 0x%04x\n",
+ id[49],
+ id[53],
+ id[63],
+ id[64],
+ id[75]);
+
+ printf ("id[76]: sata capablity = 0x%04x\n"
+ "id[78]: sata features supported = 0x%04x\n"
+ "id[79]: sata features enable = 0x%04x\n",
+ id[76],
+ id[78],
+ id[79]);
+
+ printf ("id[80]: major version = 0x%04x\n"
+ "id[81]: minor version = 0x%04x\n"
+ "id[82]: command set supported 1 = 0x%04x\n"
+ "id[83]: command set supported 2 = 0x%04x\n"
+ "id[84]: command set extension = 0x%04x\n",
+ id[80],
+ id[81],
+ id[82],
+ id[83],
+ id[84]);
+ printf ("id[85]: command set enable 1 = 0x%04x\n"
+ "id[86]: command set enable 2 = 0x%04x\n"
+ "id[87]: command set default = 0x%04x\n"
+ "id[88]: udma = 0x%04x\n"
+ "id[93]: hardware reset result = 0x%04x\n",
+ id[85],
+ id[86],
+ id[87],
+ id[88],
+ id[93]);
+}
+
+void ata_swap_buf_le16(u16 *buf, unsigned int buf_words)
+{
+ unsigned int i;
+
+ for (i = 0; i < buf_words; i++)
+ buf[i] = le16_to_cpu(buf[i]);
+}
diff --git a/drivers/ata/mvsata_ide.c b/drivers/ata/mvsata_ide.c
new file mode 100644
index 0000000000..7b6a1558d2
--- /dev/null
+++ b/drivers/ata/mvsata_ide.c
@@ -0,0 +1,199 @@
+/*
+ * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * Written-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_ORION5X)
+#include <asm/arch/orion5x.h>
+#elif defined(CONFIG_KIRKWOOD)
+#include <asm/arch/soc.h>
+#elif defined(CONFIG_ARCH_MVEBU)
+#include <linux/mbus.h>
+#endif
+
+/* SATA port registers */
+struct mvsata_port_registers {
+ u32 reserved0[10];
+ u32 edma_cmd;
+ u32 reserved1[181];
+ /* offset 0x300 : ATA Interface registers */
+ u32 sstatus;
+ u32 serror;
+ u32 scontrol;
+ u32 ltmode;
+ u32 phymode3;
+ u32 phymode4;
+ u32 reserved2[5];
+ u32 phymode1;
+ u32 phymode2;
+ u32 bist_cr;
+ u32 bist_dw1;
+ u32 bist_dw2;
+ u32 serrorintrmask;
+};
+
+/*
+ * Sanity checks:
+ * - to compile at all, we need CONFIG_SYS_ATA_BASE_ADDR.
+ * - for ide_preinit to make sense, we need at least one of
+ * CONFIG_SYS_ATA_IDE0_OFFSET or CONFIG_SYS_ATA_IDE1_OFFSET;
+ * - for ide_preinit to be called, we need CONFIG_IDE_PREINIT.
+ * Fail with an explanation message if these conditions are not met.
+ * This is particularly important for CONFIG_IDE_PREINIT, because
+ * its lack would not cause a build error.
+ */
+
+#if !defined(CONFIG_SYS_ATA_BASE_ADDR)
+#error CONFIG_SYS_ATA_BASE_ADDR must be defined
+#elif !defined(CONFIG_SYS_ATA_IDE0_OFFSET) \
+ && !defined(CONFIG_SYS_ATA_IDE1_OFFSET)
+#error CONFIG_SYS_ATA_IDE0_OFFSET or CONFIG_SYS_ATA_IDE1_OFFSET \
+ must be defined
+#elif !defined(CONFIG_IDE_PREINIT)
+#error CONFIG_IDE_PREINIT must be defined
+#endif
+
+/*
+ * Masks and values for SControl DETection and Interface Power Management,
+ * and for SStatus DETection.
+ */
+
+#define MVSATA_EDMA_CMD_ATA_RST 0x00000004
+#define MVSATA_SCONTROL_DET_MASK 0x0000000F
+#define MVSATA_SCONTROL_DET_NONE 0x00000000
+#define MVSATA_SCONTROL_DET_INIT 0x00000001
+#define MVSATA_SCONTROL_IPM_MASK 0x00000F00
+#define MVSATA_SCONTROL_IPM_NO_LP_ALLOWED 0x00000300
+#define MVSATA_SCONTROL_MASK \
+ (MVSATA_SCONTROL_DET_MASK|MVSATA_SCONTROL_IPM_MASK)
+#define MVSATA_PORT_INIT \
+ (MVSATA_SCONTROL_DET_INIT|MVSATA_SCONTROL_IPM_NO_LP_ALLOWED)
+#define MVSATA_PORT_USE \
+ (MVSATA_SCONTROL_DET_NONE|MVSATA_SCONTROL_IPM_NO_LP_ALLOWED)
+#define MVSATA_SSTATUS_DET_MASK 0x0000000F
+#define MVSATA_SSTATUS_DET_DEVCOMM 0x00000003
+
+/*
+ * Status codes to return to client callers. Currently, callers ignore
+ * exact value and only care for zero or nonzero, so no need to make this
+ * public, it is only #define'd for clarity.
+ * If/when standard negative codes are implemented in U-Boot, then these
+ * #defines should be moved to, or replaced by ones from, the common list
+ * of status codes.
+ */
+
+#define MVSATA_STATUS_OK 0
+#define MVSATA_STATUS_TIMEOUT -1
+
+/*
+ * Registers for SATA MBUS memory windows
+ */
+
+#define MVSATA_WIN_CONTROL(w) (MVEBU_AXP_SATA_BASE + 0x30 + ((w) << 4))
+#define MVSATA_WIN_BASE(w) (MVEBU_AXP_SATA_BASE + 0x34 + ((w) << 4))
+
+/*
+ * Initialize SATA memory windows for Armada XP
+ */
+
+#ifdef CONFIG_ARCH_MVEBU
+static void mvsata_ide_conf_mbus_windows(void)
+{
+ const struct mbus_dram_target_info *dram;
+ int i;
+
+ dram = mvebu_mbus_dram_info();
+
+ /* Disable windows, Set Size/Base to 0 */
+ for (i = 0; i < 4; i++) {
+ writel(0, MVSATA_WIN_CONTROL(i));
+ writel(0, MVSATA_WIN_BASE(i));
+ }
+
+ for (i = 0; i < dram->num_cs; i++) {
+ const struct mbus_dram_window *cs = dram->cs + i;
+ writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) |
+ (dram->mbus_dram_target_id << 4) | 1,
+ MVSATA_WIN_CONTROL(i));
+ writel(cs->base & 0xffff0000, MVSATA_WIN_BASE(i));
+ }
+}
+#endif
+
+/*
+ * Initialize one MVSATAHC port: set SControl's IPM to "always active"
+ * and DET to "reset", then wait for SStatus's DET to become "device and
+ * comm ok" (or time out after 50 us if no device), then set SControl's
+ * DET back to "no action".
+ */
+
+static int mvsata_ide_initialize_port(struct mvsata_port_registers *port)
+{
+ u32 control;
+ u32 status;
+ u32 timeleft = 10000; /* wait at most 10 ms for SATA reset to complete */
+
+ /* Hard reset */
+ writel(MVSATA_EDMA_CMD_ATA_RST, &port->edma_cmd);
+ udelay(25); /* taken from original marvell port */
+ writel(0, &port->edma_cmd);
+
+ /* Set control IPM to 3 (no low power) and DET to 1 (initialize) */
+ control = readl(&port->scontrol);
+ control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_INIT;
+ writel(control, &port->scontrol);
+ /* Toggle control DET back to 0 (normal operation) */
+ control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_USE;
+ writel(control, &port->scontrol);
+ /* wait for status DET to become 3 (device and communication OK) */
+ while (--timeleft) {
+ status = readl(&port->sstatus) & MVSATA_SSTATUS_DET_MASK;
+ if (status == MVSATA_SSTATUS_DET_DEVCOMM)
+ break;
+ udelay(1);
+ }
+ /* return success or time-out error depending on time left */
+ if (!timeleft)
+ return MVSATA_STATUS_TIMEOUT;
+ return MVSATA_STATUS_OK;
+}
+
+/*
+ * ide_preinit() will be called by ide_init in cmd_ide.c and will
+ * reset the MVSTATHC ports needed by the board.
+ */
+
+int ide_preinit(void)
+{
+ int ret = MVSATA_STATUS_TIMEOUT;
+ int status;
+
+#ifdef CONFIG_ARCH_MVEBU
+ mvsata_ide_conf_mbus_windows();
+#endif
+
+ /* Enable ATA port 0 (could be SATA port 0 or 1) if declared */
+#if defined(CONFIG_SYS_ATA_IDE0_OFFSET)
+ status = mvsata_ide_initialize_port(
+ (struct mvsata_port_registers *)
+ (CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE0_OFFSET));
+ if (status == MVSATA_STATUS_OK)
+ ret = MVSATA_STATUS_OK;
+#endif
+ /* Enable ATA port 1 (could be SATA port 0 or 1) if declared */
+#if defined(CONFIG_SYS_ATA_IDE1_OFFSET)
+ status = mvsata_ide_initialize_port(
+ (struct mvsata_port_registers *)
+ (CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE1_OFFSET));
+ if (status == MVSATA_STATUS_OK)
+ ret = MVSATA_STATUS_OK;
+#endif
+ /* Return success if at least one port initialization succeeded */
+ return ret;
+}
diff --git a/drivers/ata/mxc_ata.c b/drivers/ata/mxc_ata.c
new file mode 100644
index 0000000000..44bb406f4d
--- /dev/null
+++ b/drivers/ata/mxc_ata.c
@@ -0,0 +1,129 @@
+/*
+ * Freescale iMX51 ATA driver
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on code by:
+ * Mahesh Mahadevan <mahesh.mahadevan@freescale.com>
+ *
+ * Based on code from original FSL ATA driver, which is
+ * part of eCos, the Embedded Configurable Operating System.
+ * Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <config.h>
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <ide.h>
+
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+
+/* MXC ATA register offsets */
+struct mxc_ata_config_regs {
+ u8 time_off; /* 0x00 */
+ u8 time_on;
+ u8 time_1;
+ u8 time_2w;
+ u8 time_2r;
+ u8 time_ax;
+ u8 time_pio_rdx;
+ u8 time_4;
+ u8 time_9;
+ u8 time_m;
+ u8 time_jn;
+ u8 time_d;
+ u8 time_k;
+ u8 time_ack;
+ u8 time_env;
+ u8 time_udma_rdx;
+ u8 time_zah; /* 0x10 */
+ u8 time_mlix;
+ u8 time_dvh;
+ u8 time_dzfs;
+ u8 time_dvs;
+ u8 time_cvh;
+ u8 time_ss;
+ u8 time_cyc;
+ u32 fifo_data_32; /* 0x18 */
+ u32 fifo_data_16;
+ u32 fifo_fill;
+ u32 ata_control;
+ u32 interrupt_pending;
+ u32 interrupt_enable;
+ u32 interrupt_clear;
+ u32 fifo_alarm;
+};
+
+struct mxc_data_hdd_regs {
+ u32 drive_data; /* 0xa0 */
+ u32 drive_features;
+ u32 drive_sector_count;
+ u32 drive_sector_num;
+ u32 drive_cyl_low;
+ u32 drive_cyl_high;
+ u32 drive_dev_head;
+ u32 command;
+ u32 status;
+ u32 alt_status;
+};
+
+/* PIO timing table */
+#define NR_PIO_SPECS 5
+static uint16_t pio_t1[NR_PIO_SPECS] = { 70, 50, 30, 30, 25 };
+static uint16_t pio_t2_8[NR_PIO_SPECS] = { 290, 290, 290, 80, 70 };
+static uint16_t pio_t4[NR_PIO_SPECS] = { 30, 20, 15, 10, 10 };
+static uint16_t pio_t9[NR_PIO_SPECS] = { 20, 15, 10, 10, 10 };
+static uint16_t pio_tA[NR_PIO_SPECS] = { 50, 50, 50, 50, 50 };
+
+#define REG2OFF(reg) ((((uint32_t)reg) & 0x3) * 8)
+static void set_ata_bus_timing(unsigned char mode)
+{
+ uint32_t T = 1000000000 / mxc_get_clock(MXC_IPG_CLK);
+
+ struct mxc_ata_config_regs *ata_regs;
+ ata_regs = (struct mxc_ata_config_regs *)CONFIG_SYS_ATA_BASE_ADDR;
+
+ if (mode >= NR_PIO_SPECS)
+ return;
+
+ /* Write TIME_OFF/ON/1/2W */
+ writeb(3, &ata_regs->time_off);
+ writeb(3, &ata_regs->time_on);
+ writeb((pio_t1[mode] + T) / T, &ata_regs->time_1);
+ writeb((pio_t2_8[mode] + T) / T, &ata_regs->time_2w);
+
+ /* Write TIME_2R/AX/RDX/4 */
+ writeb((pio_t2_8[mode] + T) / T, &ata_regs->time_2r);
+ writeb((pio_tA[mode] + T) / T + 2, &ata_regs->time_ax);
+ writeb(1, &ata_regs->time_pio_rdx);
+ writeb((pio_t4[mode] + T) / T, &ata_regs->time_4);
+
+ /* Write TIME_9 ; the rest of timing registers is irrelevant for PIO */
+ writeb((pio_t9[mode] + T) / T, &ata_regs->time_9);
+}
+
+int ide_preinit(void)
+{
+ struct mxc_ata_config_regs *ata_regs;
+ ata_regs = (struct mxc_ata_config_regs *)CONFIG_SYS_ATA_BASE_ADDR;
+
+ /* 46.3.3.4 @ FSL iMX51 manual */
+ /* FIFO normal op., drive reset */
+ writel(0x80, &ata_regs->ata_control);
+ /* FIFO normal op., drive not reset */
+ writel(0xc0, &ata_regs->ata_control);
+
+ /* Configure the PIO timing */
+ set_ata_bus_timing(CONFIG_MXC_ATA_PIO_MODE);
+
+ /* 46.3.3.4 @ FSL iMX51 manual */
+ /* Drive not reset, IORDY handshake */
+ writel(0x41, &ata_regs->ata_control);
+
+ return 0;
+}
diff --git a/drivers/ata/sata.c b/drivers/ata/sata.c
new file mode 100644
index 0000000000..42ff5c7755
--- /dev/null
+++ b/drivers/ata/sata.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright (C) 2000-2005, DENX Software Engineering
+ * Wolfgang Denk <wd@denx.de>
+ * Copyright (C) Procsys. All rights reserved.
+ * Mushtaq Khan <mushtaq_k@procsys.com>
+ * <mushtaqk_921@yahoo.co.in>
+ * Copyright (C) 2008 Freescale Semiconductor, Inc.
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <sata.h>
+
+struct blk_desc sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
+
+#ifdef CONFIG_PARTITIONS
+struct blk_desc *sata_get_dev(int dev)
+{
+ return (dev < CONFIG_SYS_SATA_MAX_DEVICE) ? &sata_dev_desc[dev] : NULL;
+}
+#endif
+
+#ifdef CONFIG_BLK
+static unsigned long sata_bread(struct udevice *dev, lbaint_t start,
+ lbaint_t blkcnt, void *dst)
+{
+ return -ENOSYS;
+}
+
+static unsigned long sata_bwrite(struct udevice *dev, lbaint_t start,
+ lbaint_t blkcnt, const void *buffer)
+{
+ return -ENOSYS;
+}
+#else
+static unsigned long sata_bread(struct blk_desc *block_dev, lbaint_t start,
+ lbaint_t blkcnt, void *dst)
+{
+ return sata_read(block_dev->devnum, start, blkcnt, dst);
+}
+
+static unsigned long sata_bwrite(struct blk_desc *block_dev, lbaint_t start,
+ lbaint_t blkcnt, const void *buffer)
+{
+ return sata_write(block_dev->devnum, start, blkcnt, buffer);
+}
+#endif
+
+int __sata_initialize(void)
+{
+ int rc, ret = -1;
+ int i;
+
+ for (i = 0; i < CONFIG_SYS_SATA_MAX_DEVICE; i++) {
+ memset(&sata_dev_desc[i], 0, sizeof(struct blk_desc));
+ sata_dev_desc[i].if_type = IF_TYPE_SATA;
+ sata_dev_desc[i].devnum = i;
+ sata_dev_desc[i].part_type = PART_TYPE_UNKNOWN;
+ sata_dev_desc[i].type = DEV_TYPE_HARDDISK;
+ sata_dev_desc[i].lba = 0;
+ sata_dev_desc[i].blksz = 512;
+ sata_dev_desc[i].log2blksz = LOG2(sata_dev_desc[i].blksz);
+#ifndef CONFIG_BLK
+ sata_dev_desc[i].block_read = sata_bread;
+ sata_dev_desc[i].block_write = sata_bwrite;
+#endif
+ rc = init_sata(i);
+ if (!rc) {
+ rc = scan_sata(i);
+ if (!rc && sata_dev_desc[i].lba > 0 &&
+ sata_dev_desc[i].blksz > 0) {
+ part_init(&sata_dev_desc[i]);
+ ret = i;
+ }
+ }
+ }
+
+ return ret;
+}
+int sata_initialize(void) __attribute__((weak, alias("__sata_initialize")));
+
+__weak int __sata_stop(void)
+{
+ int i, err = 0;
+
+ for (i = 0; i < CONFIG_SYS_SATA_MAX_DEVICE; i++)
+ err |= reset_sata(i);
+
+ if (err)
+ printf("Could not reset some SATA devices\n");
+
+ return err;
+}
+int sata_stop(void) __attribute__((weak, alias("__sata_stop")));
+
+#ifdef CONFIG_BLK
+static const struct blk_ops sata_blk_ops = {
+ .read = sata_bread,
+ .write = sata_bwrite,
+};
+
+U_BOOT_DRIVER(sata_blk) = {
+ .name = "sata_blk",
+ .id = UCLASS_BLK,
+ .ops = &sata_blk_ops,
+};
+#else
+U_BOOT_LEGACY_BLK(sata) = {
+ .if_typename = "sata",
+ .if_type = IF_TYPE_SATA,
+ .max_devs = CONFIG_SYS_SATA_MAX_DEVICE,
+ .desc = sata_dev_desc,
+};
+#endif
diff --git a/drivers/ata/sata_ceva.c b/drivers/ata/sata_ceva.c
new file mode 100644
index 0000000000..0c24fce8dc
--- /dev/null
+++ b/drivers/ata/sata_ceva.c
@@ -0,0 +1,149 @@
+/*
+ * (C) Copyright 2015 - 2016 Xilinx, Inc.
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <dm.h>
+#include <ahci.h>
+#include <scsi.h>
+#include <asm/arch/hardware.h>
+
+#include <asm/io.h>
+
+/* Vendor Specific Register Offsets */
+#define AHCI_VEND_PCFG 0xA4
+#define AHCI_VEND_PPCFG 0xA8
+#define AHCI_VEND_PP2C 0xAC
+#define AHCI_VEND_PP3C 0xB0
+#define AHCI_VEND_PP4C 0xB4
+#define AHCI_VEND_PP5C 0xB8
+#define AHCI_VEND_PAXIC 0xC0
+#define AHCI_VEND_PTC 0xC8
+
+/* Vendor Specific Register bit definitions */
+#define PAXIC_ADBW_BW64 0x1
+#define PAXIC_MAWIDD (1 << 8)
+#define PAXIC_MARIDD (1 << 16)
+#define PAXIC_OTL (0x4 << 20)
+
+#define PCFG_TPSS_VAL (0x32 << 16)
+#define PCFG_TPRS_VAL (0x2 << 12)
+#define PCFG_PAD_VAL 0x2
+
+#define PPCFG_TTA 0x1FFFE
+#define PPCFG_PSSO_EN (1 << 28)
+#define PPCFG_PSS_EN (1 << 29)
+#define PPCFG_ESDF_EN (1 << 31)
+
+#define PP2C_CIBGMN 0x0F
+#define PP2C_CIBGMX (0x25 << 8)
+#define PP2C_CIBGN (0x18 << 16)
+#define PP2C_CINMP (0x29 << 24)
+
+#define PP3C_CWBGMN 0x04
+#define PP3C_CWBGMX (0x0B << 8)
+#define PP3C_CWBGN (0x08 << 16)
+#define PP3C_CWNMP (0x0F << 24)
+
+#define PP4C_BMX 0x0a
+#define PP4C_BNM (0x08 << 8)
+#define PP4C_SFD (0x4a << 16)
+#define PP4C_PTST (0x06 << 24)
+
+#define PP5C_RIT 0x60216
+#define PP5C_RCT (0x7f0 << 20)
+
+#define PTC_RX_WM_VAL 0x40
+#define PTC_RSVD (1 << 27)
+
+#define PORT0_BASE 0x100
+#define PORT1_BASE 0x180
+
+/* Port Control Register Bit Definitions */
+#define PORT_SCTL_SPD_GEN3 (0x3 << 4)
+#define PORT_SCTL_SPD_GEN2 (0x2 << 4)
+#define PORT_SCTL_SPD_GEN1 (0x1 << 4)
+#define PORT_SCTL_IPM (0x3 << 8)
+
+#define PORT_BASE 0x100
+#define PORT_OFFSET 0x80
+#define NR_PORTS 2
+#define DRV_NAME "ahci-ceva"
+#define CEVA_FLAG_BROKEN_GEN2 1
+
+static int ceva_init_sata(ulong mmio)
+{
+ ulong tmp;
+ int i;
+
+ /*
+ * AXI Data bus width to 64
+ * Set Mem Addr Read, Write ID for data transfers
+ * Transfer limit to 72 DWord
+ */
+ tmp = PAXIC_ADBW_BW64 | PAXIC_MAWIDD | PAXIC_MARIDD | PAXIC_OTL;
+ writel(tmp, mmio + AHCI_VEND_PAXIC);
+
+ /* Set AHCI Enable */
+ tmp = readl(mmio + HOST_CTL);
+ tmp |= HOST_AHCI_EN;
+ writel(tmp, mmio + HOST_CTL);
+
+ for (i = 0; i < NR_PORTS; i++) {
+ /* TPSS TPRS scalars, CISE and Port Addr */
+ tmp = PCFG_TPSS_VAL | PCFG_TPRS_VAL | (PCFG_PAD_VAL + i);
+ writel(tmp, mmio + AHCI_VEND_PCFG);
+
+ /* Port Phy Cfg register enables */
+ tmp = PPCFG_TTA | PPCFG_PSS_EN | PPCFG_ESDF_EN;
+ writel(tmp, mmio + AHCI_VEND_PPCFG);
+
+ /* Rx Watermark setting */
+ tmp = PTC_RX_WM_VAL | PTC_RSVD;
+ writel(tmp, mmio + AHCI_VEND_PTC);
+
+ /* Default to Gen 2 Speed and Gen 1 if Gen2 is broken */
+ tmp = PORT_SCTL_SPD_GEN3 | PORT_SCTL_IPM;
+ writel(tmp, mmio + PORT_SCR_CTL + PORT_BASE + PORT_OFFSET * i);
+ }
+ return 0;
+}
+
+static int sata_ceva_probe(struct udevice *dev)
+{
+ struct scsi_platdata *plat = dev_get_platdata(dev);
+
+ ceva_init_sata(plat->base);
+ return 0;
+}
+
+static const struct udevice_id sata_ceva_ids[] = {
+ { .compatible = "ceva,ahci-1v84" },
+ { }
+};
+
+static int sata_ceva_ofdata_to_platdata(struct udevice *dev)
+{
+ struct scsi_platdata *plat = dev_get_platdata(dev);
+
+ plat->base = devfdt_get_addr(dev);
+ if (plat->base == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ /* Hardcode number for ceva sata controller */
+ plat->max_lun = 1; /* Actually two but untested */
+ plat->max_id = 2;
+
+ return 0;
+}
+
+U_BOOT_DRIVER(ceva_host_blk) = {
+ .name = "ceva_sata",
+ .id = UCLASS_SCSI,
+ .of_match = sata_ceva_ids,
+ .probe = sata_ceva_probe,
+ .ofdata_to_platdata = sata_ceva_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct scsi_platdata),
+};
diff --git a/drivers/ata/sata_dwc.c b/drivers/ata/sata_dwc.c
new file mode 100644
index 0000000000..a226ca2dec
--- /dev/null
+++ b/drivers/ata/sata_dwc.c
@@ -0,0 +1,2076 @@
+/*
+ * sata_dwc.c
+ *
+ * Synopsys DesignWare Cores (DWC) SATA host driver
+ *
+ * Author: Mark Miesfeld <mmiesfeld@amcc.com>
+ *
+ * Ported from 2.6.19.2 to 2.6.25/26 by Stefan Roese <sr@denx.de>
+ * Copyright 2008 DENX Software Engineering
+ *
+ * Based on versions provided by AMCC and Synopsys which are:
+ * Copyright 2006 Applied Micro Circuits Corporation
+ * COPYRIGHT (C) 2005 SYNOPSYS, INC. ALL RIGHTS RESERVED
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+/*
+ * SATA support based on the chip canyonlands.
+ *
+ * 04-17-2009
+ * The local version of this driver for the canyonlands board
+ * does not use interrupts but polls the chip instead.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <linux/errno.h>
+#include <asm/io.h>
+#include <malloc.h>
+#include <ata.h>
+#include <sata.h>
+#include <linux/ctype.h>
+
+#include "sata_dwc.h"
+
+#define DMA_NUM_CHANS 1
+#define DMA_NUM_CHAN_REGS 8
+
+#define AHB_DMA_BRST_DFLT 16
+
+struct dmareg {
+ u32 low;
+ u32 high;
+};
+
+struct dma_chan_regs {
+ struct dmareg sar;
+ struct dmareg dar;
+ struct dmareg llp;
+ struct dmareg ctl;
+ struct dmareg sstat;
+ struct dmareg dstat;
+ struct dmareg sstatar;
+ struct dmareg dstatar;
+ struct dmareg cfg;
+ struct dmareg sgr;
+ struct dmareg dsr;
+};
+
+struct dma_interrupt_regs {
+ struct dmareg tfr;
+ struct dmareg block;
+ struct dmareg srctran;
+ struct dmareg dsttran;
+ struct dmareg error;
+};
+
+struct ahb_dma_regs {
+ struct dma_chan_regs chan_regs[DMA_NUM_CHAN_REGS];
+ struct dma_interrupt_regs interrupt_raw;
+ struct dma_interrupt_regs interrupt_status;
+ struct dma_interrupt_regs interrupt_mask;
+ struct dma_interrupt_regs interrupt_clear;
+ struct dmareg statusInt;
+ struct dmareg rq_srcreg;
+ struct dmareg rq_dstreg;
+ struct dmareg rq_sgl_srcreg;
+ struct dmareg rq_sgl_dstreg;
+ struct dmareg rq_lst_srcreg;
+ struct dmareg rq_lst_dstreg;
+ struct dmareg dma_cfg;
+ struct dmareg dma_chan_en;
+ struct dmareg dma_id;
+ struct dmareg dma_test;
+ struct dmareg res1;
+ struct dmareg res2;
+ /* DMA Comp Params
+ * Param 6 = dma_param[0], Param 5 = dma_param[1],
+ * Param 4 = dma_param[2] ...
+ */
+ struct dmareg dma_params[6];
+};
+
+#define DMA_EN 0x00000001
+#define DMA_DI 0x00000000
+#define DMA_CHANNEL(ch) (0x00000001 << (ch))
+#define DMA_ENABLE_CHAN(ch) ((0x00000001 << (ch)) | \
+ ((0x000000001 << (ch)) << 8))
+#define DMA_DISABLE_CHAN(ch) (0x00000000 | \
+ ((0x000000001 << (ch)) << 8))
+
+#define SATA_DWC_MAX_PORTS 1
+#define SATA_DWC_SCR_OFFSET 0x24
+#define SATA_DWC_REG_OFFSET 0x64
+
+struct sata_dwc_regs {
+ u32 fptagr;
+ u32 fpbor;
+ u32 fptcr;
+ u32 dmacr;
+ u32 dbtsr;
+ u32 intpr;
+ u32 intmr;
+ u32 errmr;
+ u32 llcr;
+ u32 phycr;
+ u32 physr;
+ u32 rxbistpd;
+ u32 rxbistpd1;
+ u32 rxbistpd2;
+ u32 txbistpd;
+ u32 txbistpd1;
+ u32 txbistpd2;
+ u32 bistcr;
+ u32 bistfctr;
+ u32 bistsr;
+ u32 bistdecr;
+ u32 res[15];
+ u32 testr;
+ u32 versionr;
+ u32 idr;
+ u32 unimpl[192];
+ u32 dmadr[256];
+};
+
+#define SATA_DWC_TXFIFO_DEPTH 0x01FF
+#define SATA_DWC_RXFIFO_DEPTH 0x01FF
+
+#define SATA_DWC_DBTSR_MWR(size) ((size / 4) & SATA_DWC_TXFIFO_DEPTH)
+#define SATA_DWC_DBTSR_MRD(size) (((size / 4) & \
+ SATA_DWC_RXFIFO_DEPTH) << 16)
+#define SATA_DWC_INTPR_DMAT 0x00000001
+#define SATA_DWC_INTPR_NEWFP 0x00000002
+#define SATA_DWC_INTPR_PMABRT 0x00000004
+#define SATA_DWC_INTPR_ERR 0x00000008
+#define SATA_DWC_INTPR_NEWBIST 0x00000010
+#define SATA_DWC_INTPR_IPF 0x10000000
+#define SATA_DWC_INTMR_DMATM 0x00000001
+#define SATA_DWC_INTMR_NEWFPM 0x00000002
+#define SATA_DWC_INTMR_PMABRTM 0x00000004
+#define SATA_DWC_INTMR_ERRM 0x00000008
+#define SATA_DWC_INTMR_NEWBISTM 0x00000010
+
+#define SATA_DWC_DMACR_TMOD_TXCHEN 0x00000004
+#define SATA_DWC_DMACR_TXRXCH_CLEAR SATA_DWC_DMACR_TMOD_TXCHEN
+
+#define SATA_DWC_QCMD_MAX 32
+
+#define SATA_DWC_SERROR_ERR_BITS 0x0FFF0F03
+
+#define HSDEVP_FROM_AP(ap) (struct sata_dwc_device_port*) \
+ (ap)->private_data
+
+struct sata_dwc_device {
+ struct device *dev;
+ struct ata_probe_ent *pe;
+ struct ata_host *host;
+ u8 *reg_base;
+ struct sata_dwc_regs *sata_dwc_regs;
+ int irq_dma;
+};
+
+struct sata_dwc_device_port {
+ struct sata_dwc_device *hsdev;
+ int cmd_issued[SATA_DWC_QCMD_MAX];
+ u32 dma_chan[SATA_DWC_QCMD_MAX];
+ int dma_pending[SATA_DWC_QCMD_MAX];
+};
+
+enum {
+ SATA_DWC_CMD_ISSUED_NOT = 0,
+ SATA_DWC_CMD_ISSUED_PEND = 1,
+ SATA_DWC_CMD_ISSUED_EXEC = 2,
+ SATA_DWC_CMD_ISSUED_NODATA = 3,
+
+ SATA_DWC_DMA_PENDING_NONE = 0,
+ SATA_DWC_DMA_PENDING_TX = 1,
+ SATA_DWC_DMA_PENDING_RX = 2,
+};
+
+#define msleep(a) udelay(a * 1000)
+#define ssleep(a) msleep(a * 1000)
+
+static int ata_probe_timeout = (ATA_TMOUT_INTERNAL / 100);
+
+enum sata_dev_state {
+ SATA_INIT = 0,
+ SATA_READY = 1,
+ SATA_NODEVICE = 2,
+ SATA_ERROR = 3,
+};
+enum sata_dev_state dev_state = SATA_INIT;
+
+static struct ahb_dma_regs *sata_dma_regs = 0;
+static struct ata_host *phost;
+static struct ata_port ap;
+static struct ata_port *pap = &ap;
+static struct ata_device ata_device;
+static struct sata_dwc_device_port dwc_devp;
+
+static void *scr_addr_sstatus;
+static u32 temp_n_block = 0;
+
+static unsigned ata_exec_internal(struct ata_device *dev,
+ struct ata_taskfile *tf, const u8 *cdb,
+ int dma_dir, unsigned int buflen,
+ unsigned long timeout);
+static unsigned int ata_dev_set_feature(struct ata_device *dev,
+ u8 enable,u8 feature);
+static unsigned int ata_dev_init_params(struct ata_device *dev,
+ u16 heads, u16 sectors);
+static u8 ata_irq_on(struct ata_port *ap);
+static struct ata_queued_cmd *__ata_qc_from_tag(struct ata_port *ap,
+ unsigned int tag);
+static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
+ u8 status, int in_wq);
+static void ata_tf_to_host(struct ata_port *ap,
+ const struct ata_taskfile *tf);
+static void ata_exec_command(struct ata_port *ap,
+ const struct ata_taskfile *tf);
+static unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc);
+static u8 ata_check_altstatus(struct ata_port *ap);
+static u8 ata_check_status(struct ata_port *ap);
+static void ata_dev_select(struct ata_port *ap, unsigned int device,
+ unsigned int wait, unsigned int can_sleep);
+static void ata_qc_issue(struct ata_queued_cmd *qc);
+static void ata_tf_load(struct ata_port *ap,
+ const struct ata_taskfile *tf);
+static int ata_dev_read_sectors(unsigned char* pdata,
+ unsigned long datalen, u32 block, u32 n_block);
+static int ata_dev_write_sectors(unsigned char* pdata,
+ unsigned long datalen , u32 block, u32 n_block);
+static void ata_std_dev_select(struct ata_port *ap, unsigned int device);
+static void ata_qc_complete(struct ata_queued_cmd *qc);
+static void __ata_qc_complete(struct ata_queued_cmd *qc);
+static void fill_result_tf(struct ata_queued_cmd *qc);
+static void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
+static void ata_mmio_data_xfer(struct ata_device *dev,
+ unsigned char *buf,
+ unsigned int buflen,int do_write);
+static void ata_pio_task(struct ata_port *arg_ap);
+static void __ata_port_freeze(struct ata_port *ap);
+static int ata_port_freeze(struct ata_port *ap);
+static void ata_qc_free(struct ata_queued_cmd *qc);
+static void ata_pio_sectors(struct ata_queued_cmd *qc);
+static void ata_pio_sector(struct ata_queued_cmd *qc);
+static void ata_pio_queue_task(struct ata_port *ap,
+ void *data,unsigned long delay);
+static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq);
+static int sata_dwc_softreset(struct ata_port *ap);
+static int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
+ unsigned int flags, u16 *id);
+static int check_sata_dev_state(void);
+
+static const struct ata_port_info sata_dwc_port_info[] = {
+ {
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING |
+ ATA_FLAG_SRST | ATA_FLAG_NCQ,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = 0x7f,
+ },
+};
+
+int init_sata(int dev)
+{
+ struct sata_dwc_device hsdev;
+ struct ata_host host;
+ struct ata_port_info pi = sata_dwc_port_info[0];
+ struct ata_link *link;
+ struct sata_dwc_device_port hsdevp = dwc_devp;
+ u8 *base = 0;
+ u8 *sata_dma_regs_addr = 0;
+ u8 status;
+ unsigned long base_addr = 0;
+ int chan = 0;
+ int rc;
+ int i;
+
+ phost = &host;
+
+ base = (u8*)SATA_BASE_ADDR;
+
+ hsdev.sata_dwc_regs = (void *__iomem)(base + SATA_DWC_REG_OFFSET);
+
+ host.n_ports = SATA_DWC_MAX_PORTS;
+
+ for (i = 0; i < SATA_DWC_MAX_PORTS; i++) {
+ ap.pflags |= ATA_PFLAG_INITIALIZING;
+ ap.flags = ATA_FLAG_DISABLED;
+ ap.print_id = -1;
+ ap.ctl = ATA_DEVCTL_OBS;
+ ap.host = &host;
+ ap.last_ctl = 0xFF;
+
+ link = &ap.link;
+ link->ap = &ap;
+ link->pmp = 0;
+ link->active_tag = ATA_TAG_POISON;
+ link->hw_sata_spd_limit = 0;
+
+ ap.port_no = i;
+ host.ports[i] = &ap;
+ }
+
+ ap.pio_mask = pi.pio_mask;
+ ap.mwdma_mask = pi.mwdma_mask;
+ ap.udma_mask = pi.udma_mask;
+ ap.flags |= pi.flags;
+ ap.link.flags |= pi.link_flags;
+
+ host.ports[0]->ioaddr.cmd_addr = base;
+ host.ports[0]->ioaddr.scr_addr = base + SATA_DWC_SCR_OFFSET;
+ scr_addr_sstatus = base + SATA_DWC_SCR_OFFSET;
+
+ base_addr = (unsigned long)base;
+
+ host.ports[0]->ioaddr.cmd_addr = (void *)base_addr + 0x00;
+ host.ports[0]->ioaddr.data_addr = (void *)base_addr + 0x00;
+
+ host.ports[0]->ioaddr.error_addr = (void *)base_addr + 0x04;
+ host.ports[0]->ioaddr.feature_addr = (void *)base_addr + 0x04;
+
+ host.ports[0]->ioaddr.nsect_addr = (void *)base_addr + 0x08;
+
+ host.ports[0]->ioaddr.lbal_addr = (void *)base_addr + 0x0c;
+ host.ports[0]->ioaddr.lbam_addr = (void *)base_addr + 0x10;
+ host.ports[0]->ioaddr.lbah_addr = (void *)base_addr + 0x14;
+
+ host.ports[0]->ioaddr.device_addr = (void *)base_addr + 0x18;
+ host.ports[0]->ioaddr.command_addr = (void *)base_addr + 0x1c;
+ host.ports[0]->ioaddr.status_addr = (void *)base_addr + 0x1c;
+
+ host.ports[0]->ioaddr.altstatus_addr = (void *)base_addr + 0x20;
+ host.ports[0]->ioaddr.ctl_addr = (void *)base_addr + 0x20;
+
+ sata_dma_regs_addr = (u8*)SATA_DMA_REG_ADDR;
+ sata_dma_regs = (void *__iomem)sata_dma_regs_addr;
+
+ status = ata_check_altstatus(&ap);
+
+ if (status == 0x7f) {
+ printf("Hard Disk not found.\n");
+ dev_state = SATA_NODEVICE;
+ rc = false;
+ return rc;
+ }
+
+ printf("Waiting for device...");
+ i = 0;
+ while (1) {
+ udelay(10000);
+
+ status = ata_check_altstatus(&ap);
+
+ if ((status & ATA_BUSY) == 0) {
+ printf("\n");
+ break;
+ }
+
+ i++;
+ if (i > (ATA_RESET_TIME * 100)) {
+ printf("** TimeOUT **\n");
+
+ dev_state = SATA_NODEVICE;
+ rc = false;
+ return rc;
+ }
+ if ((i >= 100) && ((i % 100) == 0))
+ printf(".");
+ }
+
+ rc = sata_dwc_softreset(&ap);
+
+ if (rc) {
+ printf("sata_dwc : error. soft reset failed\n");
+ return rc;
+ }
+
+ for (chan = 0; chan < DMA_NUM_CHANS; chan++) {
+ out_le32(&(sata_dma_regs->interrupt_mask.error.low),
+ DMA_DISABLE_CHAN(chan));
+
+ out_le32(&(sata_dma_regs->interrupt_mask.tfr.low),
+ DMA_DISABLE_CHAN(chan));
+ }
+
+ out_le32(&(sata_dma_regs->dma_cfg.low), DMA_DI);
+
+ out_le32(&hsdev.sata_dwc_regs->intmr,
+ SATA_DWC_INTMR_ERRM |
+ SATA_DWC_INTMR_PMABRTM);
+
+ /* Unmask the error bits that should trigger
+ * an error interrupt by setting the error mask register.
+ */
+ out_le32(&hsdev.sata_dwc_regs->errmr, SATA_DWC_SERROR_ERR_BITS);
+
+ hsdev.host = ap.host;
+ memset(&hsdevp, 0, sizeof(hsdevp));
+ hsdevp.hsdev = &hsdev;
+
+ for (i = 0; i < SATA_DWC_QCMD_MAX; i++)
+ hsdevp.cmd_issued[i] = SATA_DWC_CMD_ISSUED_NOT;
+
+ out_le32((void __iomem *)scr_addr_sstatus + 4,
+ in_le32((void __iomem *)scr_addr_sstatus + 4));
+
+ rc = 0;
+ return rc;
+}
+
+int reset_sata(int dev)
+{
+ return 0;
+}
+
+static u8 ata_check_altstatus(struct ata_port *ap)
+{
+ u8 val = 0;
+ val = readb(ap->ioaddr.altstatus_addr);
+ return val;
+}
+
+static int sata_dwc_softreset(struct ata_port *ap)
+{
+ u8 nsect,lbal = 0;
+ u8 tmp = 0;
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+
+ in_le32((void *)ap->ioaddr.scr_addr + (SCR_ERROR * 4));
+
+ writeb(0x55, ioaddr->nsect_addr);
+ writeb(0xaa, ioaddr->lbal_addr);
+ writeb(0xaa, ioaddr->nsect_addr);
+ writeb(0x55, ioaddr->lbal_addr);
+ writeb(0x55, ioaddr->nsect_addr);
+ writeb(0xaa, ioaddr->lbal_addr);
+
+ nsect = readb(ioaddr->nsect_addr);
+ lbal = readb(ioaddr->lbal_addr);
+
+ if ((nsect == 0x55) && (lbal == 0xaa)) {
+ printf("Device found\n");
+ } else {
+ printf("No device found\n");
+ dev_state = SATA_NODEVICE;
+ return false;
+ }
+
+ tmp = ATA_DEVICE_OBS;
+ writeb(tmp, ioaddr->device_addr);
+ writeb(ap->ctl, ioaddr->ctl_addr);
+
+ udelay(200);
+
+ writeb(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
+
+ udelay(200);
+ writeb(ap->ctl, ioaddr->ctl_addr);
+
+ msleep(150);
+ ata_check_status(ap);
+
+ msleep(50);
+ ata_check_status(ap);
+
+ while (1) {
+ u8 status = ata_check_status(ap);
+
+ if (!(status & ATA_BUSY))
+ break;
+
+ printf("Hard Disk status is BUSY.\n");
+ msleep(50);
+ }
+
+ tmp = ATA_DEVICE_OBS;
+ writeb(tmp, ioaddr->device_addr);
+
+ nsect = readb(ioaddr->nsect_addr);
+ lbal = readb(ioaddr->lbal_addr);
+
+ return 0;
+}
+
+static u8 ata_check_status(struct ata_port *ap)
+{
+ u8 val = 0;
+ val = readb(ap->ioaddr.status_addr);
+ return val;
+}
+
+static int ata_id_has_hipm(const u16 *id)
+{
+ u16 val = id[76];
+
+ if (val == 0 || val == 0xffff)
+ return -1;
+
+ return val & (1 << 9);
+}
+
+static int ata_id_has_dipm(const u16 *id)
+{
+ u16 val = id[78];
+
+ if (val == 0 || val == 0xffff)
+ return -1;
+
+ return val & (1 << 3);
+}
+
+int scan_sata(int dev)
+{
+ int i;
+ int rc;
+ u8 status;
+ const u16 *id;
+ struct ata_device *ata_dev = &ata_device;
+ unsigned long pio_mask, mwdma_mask;
+ char revbuf[7];
+ u16 iobuf[ATA_SECTOR_WORDS];
+
+ memset(iobuf, 0, sizeof(iobuf));
+
+ if (dev_state == SATA_NODEVICE)
+ return 1;
+
+ printf("Waiting for device...");
+ i = 0;
+ while (1) {
+ udelay(10000);
+
+ status = ata_check_altstatus(&ap);
+
+ if ((status & ATA_BUSY) == 0) {
+ printf("\n");
+ break;
+ }
+
+ i++;
+ if (i > (ATA_RESET_TIME * 100)) {
+ printf("** TimeOUT **\n");
+
+ dev_state = SATA_NODEVICE;
+ return 1;
+ }
+ if ((i >= 100) && ((i % 100) == 0))
+ printf(".");
+ }
+
+ udelay(1000);
+
+ rc = ata_dev_read_id(ata_dev, &ata_dev->class,
+ ATA_READID_POSTRESET,ata_dev->id);
+ if (rc) {
+ printf("sata_dwc : error. failed sata scan\n");
+ return 1;
+ }
+
+ /* SATA drives indicate we have a bridge. We don't know which
+ * end of the link the bridge is which is a problem
+ */
+ if (ata_id_is_sata(ata_dev->id))
+ ap.cbl = ATA_CBL_SATA;
+
+ id = ata_dev->id;
+
+ ata_dev->flags &= ~ATA_DFLAG_CFG_MASK;
+ ata_dev->max_sectors = 0;
+ ata_dev->cdb_len = 0;
+ ata_dev->n_sectors = 0;
+ ata_dev->cylinders = 0;
+ ata_dev->heads = 0;
+ ata_dev->sectors = 0;
+
+ if (id[ATA_ID_FIELD_VALID] & (1 << 1)) {
+ pio_mask = id[ATA_ID_PIO_MODES] & 0x03;
+ pio_mask <<= 3;
+ pio_mask |= 0x7;
+ } else {
+ /* If word 64 isn't valid then Word 51 high byte holds
+ * the PIO timing number for the maximum. Turn it into
+ * a mask.
+ */
+ u8 mode = (id[ATA_ID_OLD_PIO_MODES] >> 8) & 0xFF;
+ if (mode < 5) {
+ pio_mask = (2 << mode) - 1;
+ } else {
+ pio_mask = 1;
+ }
+ }
+
+ mwdma_mask = id[ATA_ID_MWDMA_MODES] & 0x07;
+
+ if (ata_id_is_cfa(id)) {
+ int pio = id[163] & 0x7;
+ int dma = (id[163] >> 3) & 7;
+
+ if (pio)
+ pio_mask |= (1 << 5);
+ if (pio > 1)
+ pio_mask |= (1 << 6);
+ if (dma)
+ mwdma_mask |= (1 << 3);
+ if (dma > 1)
+ mwdma_mask |= (1 << 4);
+ }
+
+ if (ata_dev->class == ATA_DEV_ATA) {
+ if (ata_id_is_cfa(id)) {
+ if (id[162] & 1)
+ printf("supports DRM functions and may "
+ "not be fully accessable.\n");
+ strcpy(revbuf, "CFA");
+ } else {
+ if (ata_id_has_tpm(id))
+ printf("supports DRM functions and may "
+ "not be fully accessable.\n");
+ }
+
+ ata_dev->n_sectors = ata_id_n_sectors((u16*)id);
+
+ if (ata_dev->id[59] & 0x100)
+ ata_dev->multi_count = ata_dev->id[59] & 0xff;
+
+ if (ata_id_has_lba(id)) {
+ char ncq_desc[20];
+
+ ata_dev->flags |= ATA_DFLAG_LBA;
+ if (ata_id_has_lba48(id)) {
+ ata_dev->flags |= ATA_DFLAG_LBA48;
+
+ if (ata_dev->n_sectors >= (1UL << 28) &&
+ ata_id_has_flush_ext(id))
+ ata_dev->flags |= ATA_DFLAG_FLUSH_EXT;
+ }
+ if (!ata_id_has_ncq(ata_dev->id))
+ ncq_desc[0] = '\0';
+
+ if (ata_dev->horkage & ATA_HORKAGE_NONCQ)
+ strcpy(ncq_desc, "NCQ (not used)");
+
+ if (ap.flags & ATA_FLAG_NCQ)
+ ata_dev->flags |= ATA_DFLAG_NCQ;
+ }
+ ata_dev->cdb_len = 16;
+ }
+ ata_dev->max_sectors = ATA_MAX_SECTORS;
+ if (ata_dev->flags & ATA_DFLAG_LBA48)
+ ata_dev->max_sectors = ATA_MAX_SECTORS_LBA48;
+
+ if (!(ata_dev->horkage & ATA_HORKAGE_IPM)) {
+ if (ata_id_has_hipm(ata_dev->id))
+ ata_dev->flags |= ATA_DFLAG_HIPM;
+ if (ata_id_has_dipm(ata_dev->id))
+ ata_dev->flags |= ATA_DFLAG_DIPM;
+ }
+
+ if ((ap.cbl == ATA_CBL_SATA) && (!ata_id_is_sata(ata_dev->id))) {
+ ata_dev->udma_mask &= ATA_UDMA5;
+ ata_dev->max_sectors = ATA_MAX_SECTORS;
+ }
+
+ if (ata_dev->horkage & ATA_HORKAGE_DIAGNOSTIC) {
+ printf("Drive reports diagnostics failure."
+ "This may indicate a drive\n");
+ printf("fault or invalid emulation."
+ "Contact drive vendor for information.\n");
+ }
+
+ rc = check_sata_dev_state();
+
+ ata_id_c_string(ata_dev->id,
+ (unsigned char *)sata_dev_desc[dev].revision,
+ ATA_ID_FW_REV, sizeof(sata_dev_desc[dev].revision));
+ ata_id_c_string(ata_dev->id,
+ (unsigned char *)sata_dev_desc[dev].vendor,
+ ATA_ID_PROD, sizeof(sata_dev_desc[dev].vendor));
+ ata_id_c_string(ata_dev->id,
+ (unsigned char *)sata_dev_desc[dev].product,
+ ATA_ID_SERNO, sizeof(sata_dev_desc[dev].product));
+
+ sata_dev_desc[dev].lba = (u32) ata_dev->n_sectors;
+
+#ifdef CONFIG_LBA48
+ if (ata_dev->id[83] & (1 << 10)) {
+ sata_dev_desc[dev].lba48 = 1;
+ } else {
+ sata_dev_desc[dev].lba48 = 0;
+ }
+#endif
+
+ return 0;
+}
+
+static u8 ata_busy_wait(struct ata_port *ap,
+ unsigned int bits,unsigned int max)
+{
+ u8 status;
+
+ do {
+ udelay(10);
+ status = ata_check_status(ap);
+ max--;
+ } while (status != 0xff && (status & bits) && (max > 0));
+
+ return status;
+}
+
+static int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
+ unsigned int flags, u16 *id)
+{
+ struct ata_port *ap = pap;
+ unsigned int class = *p_class;
+ struct ata_taskfile tf;
+ unsigned int err_mask = 0;
+ const char *reason;
+ int may_fallback = 1, tried_spinup = 0;
+ u8 status;
+ int rc;
+
+ status = ata_busy_wait(ap, ATA_BUSY, 30000);
+ if (status & ATA_BUSY) {
+ printf("BSY = 0 check. timeout.\n");
+ rc = false;
+ return rc;
+ }
+
+ ata_dev_select(ap, dev->devno, 1, 1);
+
+retry:
+ memset(&tf, 0, sizeof(tf));
+ ap->print_id = 1;
+ ap->flags &= ~ATA_FLAG_DISABLED;
+ tf.ctl = ap->ctl;
+ tf.device = ATA_DEVICE_OBS;
+ tf.command = ATA_CMD_ID_ATA;
+ tf.protocol = ATA_PROT_PIO;
+
+ /* Some devices choke if TF registers contain garbage. Make
+ * sure those are properly initialized.
+ */
+ tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+
+ /* Device presence detection is unreliable on some
+ * controllers. Always poll IDENTIFY if available.
+ */
+ tf.flags |= ATA_TFLAG_POLLING;
+
+ temp_n_block = 1;
+
+ err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE,
+ sizeof(id[0]) * ATA_ID_WORDS, 0);
+
+ if (err_mask) {
+ if (err_mask & AC_ERR_NODEV_HINT) {
+ printf("NODEV after polling detection\n");
+ return -ENOENT;
+ }
+
+ if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) {
+ /* Device or controller might have reported
+ * the wrong device class. Give a shot at the
+ * other IDENTIFY if the current one is
+ * aborted by the device.
+ */
+ if (may_fallback) {
+ may_fallback = 0;
+
+ if (class == ATA_DEV_ATA) {
+ class = ATA_DEV_ATAPI;
+ } else {
+ class = ATA_DEV_ATA;
+ }
+ goto retry;
+ }
+ /* Control reaches here iff the device aborted
+ * both flavors of IDENTIFYs which happens
+ * sometimes with phantom devices.
+ */
+ printf("both IDENTIFYs aborted, assuming NODEV\n");
+ return -ENOENT;
+ }
+ rc = -EIO;
+ reason = "I/O error";
+ goto err_out;
+ }
+
+ /* Falling back doesn't make sense if ID data was read
+ * successfully at least once.
+ */
+ may_fallback = 0;
+
+ unsigned int id_cnt;
+
+ for (id_cnt = 0; id_cnt < ATA_ID_WORDS; id_cnt++)
+ id[id_cnt] = le16_to_cpu(id[id_cnt]);
+
+
+ rc = -EINVAL;
+ reason = "device reports invalid type";
+
+ if (class == ATA_DEV_ATA) {
+ if (!ata_id_is_ata(id) && !ata_id_is_cfa(id))
+ goto err_out;
+ } else {
+ if (ata_id_is_ata(id))
+ goto err_out;
+ }
+ if (!tried_spinup && (id[2] == 0x37c8 || id[2] == 0x738c)) {
+ tried_spinup = 1;
+ /*
+ * Drive powered-up in standby mode, and requires a specific
+ * SET_FEATURES spin-up subcommand before it will accept
+ * anything other than the original IDENTIFY command.
+ */
+ err_mask = ata_dev_set_feature(dev, SETFEATURES_SPINUP, 0);
+ if (err_mask && id[2] != 0x738c) {
+ rc = -EIO;
+ reason = "SPINUP failed";
+ goto err_out;
+ }
+ /*
+ * If the drive initially returned incomplete IDENTIFY info,
+ * we now must reissue the IDENTIFY command.
+ */
+ if (id[2] == 0x37c8)
+ goto retry;
+ }
+
+ if ((flags & ATA_READID_POSTRESET) && class == ATA_DEV_ATA) {
+ /*
+ * The exact sequence expected by certain pre-ATA4 drives is:
+ * SRST RESET
+ * IDENTIFY (optional in early ATA)
+ * INITIALIZE DEVICE PARAMETERS (later IDE and ATA)
+ * anything else..
+ * Some drives were very specific about that exact sequence.
+ *
+ * Note that ATA4 says lba is mandatory so the second check
+ * shoud never trigger.
+ */
+ if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) {
+ err_mask = ata_dev_init_params(dev, id[3], id[6]);
+ if (err_mask) {
+ rc = -EIO;
+ reason = "INIT_DEV_PARAMS failed";
+ goto err_out;
+ }
+
+ /* current CHS translation info (id[53-58]) might be
+ * changed. reread the identify device info.
+ */
+ flags &= ~ATA_READID_POSTRESET;
+ goto retry;
+ }
+ }
+
+ *p_class = class;
+ return 0;
+
+err_out:
+ printf("failed to READ ID (%s, err_mask=0x%x)\n", reason, err_mask);
+ return rc;
+}
+
+static u8 ata_wait_idle(struct ata_port *ap)
+{
+ u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
+ return status;
+}
+
+static void ata_dev_select(struct ata_port *ap, unsigned int device,
+ unsigned int wait, unsigned int can_sleep)
+{
+ if (wait)
+ ata_wait_idle(ap);
+
+ ata_std_dev_select(ap, device);
+
+ if (wait)
+ ata_wait_idle(ap);
+}
+
+static void ata_std_dev_select(struct ata_port *ap, unsigned int device)
+{
+ u8 tmp;
+
+ if (device == 0) {
+ tmp = ATA_DEVICE_OBS;
+ } else {
+ tmp = ATA_DEVICE_OBS | ATA_DEV1;
+ }
+
+ writeb(tmp, ap->ioaddr.device_addr);
+
+ readb(ap->ioaddr.altstatus_addr);
+
+ udelay(1);
+}
+
+static int waiting_for_reg_state(volatile u8 *offset,
+ int timeout_msec,
+ u32 sign)
+{
+ int i;
+ u32 status;
+
+ for (i = 0; i < timeout_msec; i++) {
+ status = readl(offset);
+ if ((status & sign) != 0)
+ break;
+ msleep(1);
+ }
+
+ return (i < timeout_msec) ? 0 : -1;
+}
+
+static void ata_qc_reinit(struct ata_queued_cmd *qc)
+{
+ qc->dma_dir = DMA_NONE;
+ qc->flags = 0;
+ qc->nbytes = qc->extrabytes = qc->curbytes = 0;
+ qc->n_elem = 0;
+ qc->err_mask = 0;
+ qc->sect_size = ATA_SECT_SIZE;
+ qc->nbytes = ATA_SECT_SIZE * temp_n_block;
+
+ memset(&qc->tf, 0, sizeof(qc->tf));
+ qc->tf.ctl = 0;
+ qc->tf.device = ATA_DEVICE_OBS;
+
+ qc->result_tf.command = ATA_DRDY;
+ qc->result_tf.feature = 0;
+}
+
+struct ata_queued_cmd *__ata_qc_from_tag(struct ata_port *ap,
+ unsigned int tag)
+{
+ if (tag < ATA_MAX_QUEUE)
+ return &ap->qcmd[tag];
+ return NULL;
+}
+
+static void __ata_port_freeze(struct ata_port *ap)
+{
+ printf("set port freeze.\n");
+ ap->pflags |= ATA_PFLAG_FROZEN;
+}
+
+static int ata_port_freeze(struct ata_port *ap)
+{
+ __ata_port_freeze(ap);
+ return 0;
+}
+
+unsigned ata_exec_internal(struct ata_device *dev,
+ struct ata_taskfile *tf, const u8 *cdb,
+ int dma_dir, unsigned int buflen,
+ unsigned long timeout)
+{
+ struct ata_link *link = dev->link;
+ struct ata_port *ap = pap;
+ struct ata_queued_cmd *qc;
+ unsigned int tag, preempted_tag;
+ u32 preempted_sactive, preempted_qc_active;
+ int preempted_nr_active_links;
+ unsigned int err_mask;
+ int rc = 0;
+ u8 status;
+
+ status = ata_busy_wait(ap, ATA_BUSY, 300000);
+ if (status & ATA_BUSY) {
+ printf("BSY = 0 check. timeout.\n");
+ rc = false;
+ return rc;
+ }
+
+ if (ap->pflags & ATA_PFLAG_FROZEN)
+ return AC_ERR_SYSTEM;
+
+ tag = ATA_TAG_INTERNAL;
+
+ if (test_and_set_bit(tag, &ap->qc_allocated)) {
+ rc = false;
+ return rc;
+ }
+
+ qc = __ata_qc_from_tag(ap, tag);
+ qc->tag = tag;
+ qc->ap = ap;
+ qc->dev = dev;
+
+ ata_qc_reinit(qc);
+
+ preempted_tag = link->active_tag;
+ preempted_sactive = link->sactive;
+ preempted_qc_active = ap->qc_active;
+ preempted_nr_active_links = ap->nr_active_links;
+ link->active_tag = ATA_TAG_POISON;
+ link->sactive = 0;
+ ap->qc_active = 0;
+ ap->nr_active_links = 0;
+
+ qc->tf = *tf;
+ if (cdb)
+ memcpy(qc->cdb, cdb, ATAPI_CDB_LEN);
+ qc->flags |= ATA_QCFLAG_RESULT_TF;
+ qc->dma_dir = dma_dir;
+ qc->private_data = 0;
+
+ ata_qc_issue(qc);
+
+ if (!timeout)
+ timeout = ata_probe_timeout * 1000 / HZ;
+
+ status = ata_busy_wait(ap, ATA_BUSY, 30000);
+ if (status & ATA_BUSY) {
+ printf("BSY = 0 check. timeout.\n");
+ printf("altstatus = 0x%x.\n", status);
+ qc->err_mask |= AC_ERR_OTHER;
+ return qc->err_mask;
+ }
+
+ if (waiting_for_reg_state(ap->ioaddr.altstatus_addr, 1000, 0x8)) {
+ u8 status = 0;
+ u8 errorStatus = 0;
+
+ status = readb(ap->ioaddr.altstatus_addr);
+ if ((status & 0x01) != 0) {
+ errorStatus = readb(ap->ioaddr.feature_addr);
+ if (errorStatus == 0x04 &&
+ qc->tf.command == ATA_CMD_PIO_READ_EXT){
+ printf("Hard Disk doesn't support LBA48\n");
+ dev_state = SATA_ERROR;
+ qc->err_mask |= AC_ERR_OTHER;
+ return qc->err_mask;
+ }
+ }
+ qc->err_mask |= AC_ERR_OTHER;
+ return qc->err_mask;
+ }
+
+ status = ata_busy_wait(ap, ATA_BUSY, 10);
+ if (status & ATA_BUSY) {
+ printf("BSY = 0 check. timeout.\n");
+ qc->err_mask |= AC_ERR_OTHER;
+ return qc->err_mask;
+ }
+
+ ata_pio_task(ap);
+
+ if (!rc) {
+ if (qc->flags & ATA_QCFLAG_ACTIVE) {
+ qc->err_mask |= AC_ERR_TIMEOUT;
+ ata_port_freeze(ap);
+ }
+ }
+
+ if (qc->flags & ATA_QCFLAG_FAILED) {
+ if (qc->result_tf.command & (ATA_ERR | ATA_DF))
+ qc->err_mask |= AC_ERR_DEV;
+
+ if (!qc->err_mask)
+ qc->err_mask |= AC_ERR_OTHER;
+
+ if (qc->err_mask & ~AC_ERR_OTHER)
+ qc->err_mask &= ~AC_ERR_OTHER;
+ }
+
+ *tf = qc->result_tf;
+ err_mask = qc->err_mask;
+ ata_qc_free(qc);
+ link->active_tag = preempted_tag;
+ link->sactive = preempted_sactive;
+ ap->qc_active = preempted_qc_active;
+ ap->nr_active_links = preempted_nr_active_links;
+
+ if (ap->flags & ATA_FLAG_DISABLED) {
+ err_mask |= AC_ERR_SYSTEM;
+ ap->flags &= ~ATA_FLAG_DISABLED;
+ }
+
+ return err_mask;
+}
+
+static void ata_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_link *link = qc->dev->link;
+ u8 prot = qc->tf.protocol;
+
+ if (ata_is_ncq(prot)) {
+ if (!link->sactive)
+ ap->nr_active_links++;
+ link->sactive |= 1 << qc->tag;
+ } else {
+ ap->nr_active_links++;
+ link->active_tag = qc->tag;
+ }
+
+ qc->flags |= ATA_QCFLAG_ACTIVE;
+ ap->qc_active |= 1 << qc->tag;
+
+ if (qc->dev->flags & ATA_DFLAG_SLEEPING) {
+ msleep(1);
+ return;
+ }
+
+ qc->err_mask |= ata_qc_issue_prot(qc);
+ if (qc->err_mask)
+ goto err;
+
+ return;
+err:
+ ata_qc_complete(qc);
+}
+
+static unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+
+ if (ap->flags & ATA_FLAG_PIO_POLLING) {
+ switch (qc->tf.protocol) {
+ case ATA_PROT_PIO:
+ case ATA_PROT_NODATA:
+ case ATAPI_PROT_PIO:
+ case ATAPI_PROT_NODATA:
+ qc->tf.flags |= ATA_TFLAG_POLLING;
+ break;
+ default:
+ break;
+ }
+ }
+
+ ata_dev_select(ap, qc->dev->devno, 1, 0);
+
+ switch (qc->tf.protocol) {
+ case ATA_PROT_PIO:
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ qc->tf.ctl |= ATA_NIEN;
+
+ ata_tf_to_host(ap, &qc->tf);
+
+ ap->hsm_task_state = HSM_ST;
+
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ ata_pio_queue_task(ap, qc, 0);
+
+ break;
+
+ default:
+ return AC_ERR_SYSTEM;
+ }
+
+ return 0;
+}
+
+static void ata_tf_to_host(struct ata_port *ap,
+ const struct ata_taskfile *tf)
+{
+ ata_tf_load(ap, tf);
+ ata_exec_command(ap, tf);
+}
+
+static void ata_tf_load(struct ata_port *ap,
+ const struct ata_taskfile *tf)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+
+ if (tf->ctl != ap->last_ctl) {
+ if (ioaddr->ctl_addr)
+ writeb(tf->ctl, ioaddr->ctl_addr);
+ ap->last_ctl = tf->ctl;
+ ata_wait_idle(ap);
+ }
+
+ if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+ writeb(tf->hob_feature, ioaddr->feature_addr);
+ writeb(tf->hob_nsect, ioaddr->nsect_addr);
+ writeb(tf->hob_lbal, ioaddr->lbal_addr);
+ writeb(tf->hob_lbam, ioaddr->lbam_addr);
+ writeb(tf->hob_lbah, ioaddr->lbah_addr);
+ }
+
+ if (is_addr) {
+ writeb(tf->feature, ioaddr->feature_addr);
+ writeb(tf->nsect, ioaddr->nsect_addr);
+ writeb(tf->lbal, ioaddr->lbal_addr);
+ writeb(tf->lbam, ioaddr->lbam_addr);
+ writeb(tf->lbah, ioaddr->lbah_addr);
+ }
+
+ if (tf->flags & ATA_TFLAG_DEVICE)
+ writeb(tf->device, ioaddr->device_addr);
+
+ ata_wait_idle(ap);
+}
+
+static void ata_exec_command(struct ata_port *ap,
+ const struct ata_taskfile *tf)
+{
+ writeb(tf->command, ap->ioaddr.command_addr);
+
+ readb(ap->ioaddr.altstatus_addr);
+
+ udelay(1);
+}
+
+static void ata_pio_queue_task(struct ata_port *ap,
+ void *data,unsigned long delay)
+{
+ ap->port_task_data = data;
+}
+
+static unsigned int ac_err_mask(u8 status)
+{
+ if (status & (ATA_BUSY | ATA_DRQ))
+ return AC_ERR_HSM;
+ if (status & (ATA_ERR | ATA_DF))
+ return AC_ERR_DEV;
+ return 0;
+}
+
+static unsigned int __ac_err_mask(u8 status)
+{
+ unsigned int mask = ac_err_mask(status);
+ if (mask == 0)
+ return AC_ERR_OTHER;
+ return mask;
+}
+
+static void ata_pio_task(struct ata_port *arg_ap)
+{
+ struct ata_port *ap = arg_ap;
+ struct ata_queued_cmd *qc = ap->port_task_data;
+ u8 status;
+ int poll_next;
+
+fsm_start:
+ /*
+ * This is purely heuristic. This is a fast path.
+ * Sometimes when we enter, BSY will be cleared in
+ * a chk-status or two. If not, the drive is probably seeking
+ * or something. Snooze for a couple msecs, then
+ * chk-status again. If still busy, queue delayed work.
+ */
+ status = ata_busy_wait(ap, ATA_BUSY, 5);
+ if (status & ATA_BUSY) {
+ msleep(2);
+ status = ata_busy_wait(ap, ATA_BUSY, 10);
+ if (status & ATA_BUSY) {
+ ata_pio_queue_task(ap, qc, ATA_SHORT_PAUSE);
+ return;
+ }
+ }
+
+ poll_next = ata_hsm_move(ap, qc, status, 1);
+
+ /* another command or interrupt handler
+ * may be running at this point.
+ */
+ if (poll_next)
+ goto fsm_start;
+}
+
+static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
+ u8 status, int in_wq)
+{
+ int poll_next;
+
+fsm_start:
+ switch (ap->hsm_task_state) {
+ case HSM_ST_FIRST:
+ poll_next = (qc->tf.flags & ATA_TFLAG_POLLING);
+
+ if ((status & ATA_DRQ) == 0) {
+ if (status & (ATA_ERR | ATA_DF)) {
+ qc->err_mask |= AC_ERR_DEV;
+ } else {
+ qc->err_mask |= AC_ERR_HSM;
+ }
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
+
+ /* Device should not ask for data transfer (DRQ=1)
+ * when it finds something wrong.
+ * We ignore DRQ here and stop the HSM by
+ * changing hsm_task_state to HSM_ST_ERR and
+ * let the EH abort the command or reset the device.
+ */
+ if (status & (ATA_ERR | ATA_DF)) {
+ if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) {
+ printf("DRQ=1 with device error, "
+ "dev_stat 0x%X\n", status);
+ qc->err_mask |= AC_ERR_HSM;
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
+ }
+
+ if (qc->tf.protocol == ATA_PROT_PIO) {
+ /* PIO data out protocol.
+ * send first data block.
+ */
+ /* ata_pio_sectors() might change the state
+ * to HSM_ST_LAST. so, the state is changed here
+ * before ata_pio_sectors().
+ */
+ ap->hsm_task_state = HSM_ST;
+ ata_pio_sectors(qc);
+ } else {
+ printf("protocol is not ATA_PROT_PIO \n");
+ }
+ break;
+
+ case HSM_ST:
+ if ((status & ATA_DRQ) == 0) {
+ if (status & (ATA_ERR | ATA_DF)) {
+ qc->err_mask |= AC_ERR_DEV;
+ } else {
+ /* HSM violation. Let EH handle this.
+ * Phantom devices also trigger this
+ * condition. Mark hint.
+ */
+ qc->err_mask |= AC_ERR_HSM | AC_ERR_NODEV_HINT;
+ }
+
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
+ /* For PIO reads, some devices may ask for
+ * data transfer (DRQ=1) alone with ERR=1.
+ * We respect DRQ here and transfer one
+ * block of junk data before changing the
+ * hsm_task_state to HSM_ST_ERR.
+ *
+ * For PIO writes, ERR=1 DRQ=1 doesn't make
+ * sense since the data block has been
+ * transferred to the device.
+ */
+ if (status & (ATA_ERR | ATA_DF)) {
+ qc->err_mask |= AC_ERR_DEV;
+
+ if (!(qc->tf.flags & ATA_TFLAG_WRITE)) {
+ ata_pio_sectors(qc);
+ status = ata_wait_idle(ap);
+ }
+
+ if (status & (ATA_BUSY | ATA_DRQ))
+ qc->err_mask |= AC_ERR_HSM;
+
+ /* ata_pio_sectors() might change the
+ * state to HSM_ST_LAST. so, the state
+ * is changed after ata_pio_sectors().
+ */
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
+
+ ata_pio_sectors(qc);
+ if (ap->hsm_task_state == HSM_ST_LAST &&
+ (!(qc->tf.flags & ATA_TFLAG_WRITE))) {
+ status = ata_wait_idle(ap);
+ goto fsm_start;
+ }
+
+ poll_next = 1;
+ break;
+
+ case HSM_ST_LAST:
+ if (!ata_ok(status)) {
+ qc->err_mask |= __ac_err_mask(status);
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
+
+ ap->hsm_task_state = HSM_ST_IDLE;
+
+ ata_hsm_qc_complete(qc, in_wq);
+
+ poll_next = 0;
+ break;
+
+ case HSM_ST_ERR:
+ /* make sure qc->err_mask is available to
+ * know what's wrong and recover
+ */
+ ap->hsm_task_state = HSM_ST_IDLE;
+
+ ata_hsm_qc_complete(qc, in_wq);
+
+ poll_next = 0;
+ break;
+ default:
+ poll_next = 0;
+ }
+
+ return poll_next;
+}
+
+static void ata_pio_sectors(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap;
+ ap = pap;
+ qc->pdata = ap->pdata;
+
+ ata_pio_sector(qc);
+
+ readb(qc->ap->ioaddr.altstatus_addr);
+ udelay(1);
+}
+
+static void ata_pio_sector(struct ata_queued_cmd *qc)
+{
+ int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
+ struct ata_port *ap = qc->ap;
+ unsigned int offset;
+ unsigned char *buf;
+ char temp_data_buf[512];
+
+ if (qc->curbytes == qc->nbytes - qc->sect_size)
+ ap->hsm_task_state = HSM_ST_LAST;
+
+ offset = qc->curbytes;
+
+ switch (qc->tf.command) {
+ case ATA_CMD_ID_ATA:
+ buf = (unsigned char *)&ata_device.id[0];
+ break;
+ case ATA_CMD_PIO_READ_EXT:
+ case ATA_CMD_PIO_READ:
+ case ATA_CMD_PIO_WRITE_EXT:
+ case ATA_CMD_PIO_WRITE:
+ buf = qc->pdata + offset;
+ break;
+ default:
+ buf = (unsigned char *)&temp_data_buf[0];
+ }
+
+ ata_mmio_data_xfer(qc->dev, buf, qc->sect_size, do_write);
+
+ qc->curbytes += qc->sect_size;
+
+}
+
+static void ata_mmio_data_xfer(struct ata_device *dev, unsigned char *buf,
+ unsigned int buflen, int do_write)
+{
+ struct ata_port *ap = pap;
+ void __iomem *data_addr = ap->ioaddr.data_addr;
+ unsigned int words = buflen >> 1;
+ u16 *buf16 = (u16 *)buf;
+ unsigned int i = 0;
+
+ udelay(100);
+ if (do_write) {
+ for (i = 0; i < words; i++)
+ writew(le16_to_cpu(buf16[i]), data_addr);
+ } else {
+ for (i = 0; i < words; i++)
+ buf16[i] = cpu_to_le16(readw(data_addr));
+ }
+
+ if (buflen & 0x01) {
+ __le16 align_buf[1] = { 0 };
+ unsigned char *trailing_buf = buf + buflen - 1;
+
+ if (do_write) {
+ memcpy(align_buf, trailing_buf, 1);
+ writew(le16_to_cpu(align_buf[0]), data_addr);
+ } else {
+ align_buf[0] = cpu_to_le16(readw(data_addr));
+ memcpy(trailing_buf, align_buf, 1);
+ }
+ }
+}
+
+static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq)
+{
+ struct ata_port *ap = qc->ap;
+
+ if (in_wq) {
+ /* EH might have kicked in while host lock is
+ * released.
+ */
+ qc = &ap->qcmd[qc->tag];
+ if (qc) {
+ if (!(qc->err_mask & AC_ERR_HSM)) {
+ ata_irq_on(ap);
+ ata_qc_complete(qc);
+ } else {
+ ata_port_freeze(ap);
+ }
+ }
+ } else {
+ if (!(qc->err_mask & AC_ERR_HSM)) {
+ ata_qc_complete(qc);
+ } else {
+ ata_port_freeze(ap);
+ }
+ }
+}
+
+static u8 ata_irq_on(struct ata_port *ap)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ u8 tmp;
+
+ ap->ctl &= ~ATA_NIEN;
+ ap->last_ctl = ap->ctl;
+
+ if (ioaddr->ctl_addr)
+ writeb(ap->ctl, ioaddr->ctl_addr);
+
+ tmp = ata_wait_idle(ap);
+
+ return tmp;
+}
+
+static unsigned int ata_tag_internal(unsigned int tag)
+{
+ return tag == ATA_MAX_QUEUE - 1;
+}
+
+static void ata_qc_complete(struct ata_queued_cmd *qc)
+{
+ struct ata_device *dev = qc->dev;
+ if (qc->err_mask)
+ qc->flags |= ATA_QCFLAG_FAILED;
+
+ if (qc->flags & ATA_QCFLAG_FAILED) {
+ if (!ata_tag_internal(qc->tag)) {
+ fill_result_tf(qc);
+ return;
+ }
+ }
+ if (qc->flags & ATA_QCFLAG_RESULT_TF)
+ fill_result_tf(qc);
+
+ /* Some commands need post-processing after successful
+ * completion.
+ */
+ switch (qc->tf.command) {
+ case ATA_CMD_SET_FEATURES:
+ if (qc->tf.feature != SETFEATURES_WC_ON &&
+ qc->tf.feature != SETFEATURES_WC_OFF)
+ break;
+ case ATA_CMD_INIT_DEV_PARAMS:
+ case ATA_CMD_SET_MULTI:
+ break;
+
+ case ATA_CMD_SLEEP:
+ dev->flags |= ATA_DFLAG_SLEEPING;
+ break;
+ }
+
+ __ata_qc_complete(qc);
+}
+
+static void fill_result_tf(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+
+ qc->result_tf.flags = qc->tf.flags;
+ ata_tf_read(ap, &qc->result_tf);
+}
+
+static void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+
+ tf->command = ata_check_status(ap);
+ tf->feature = readb(ioaddr->error_addr);
+ tf->nsect = readb(ioaddr->nsect_addr);
+ tf->lbal = readb(ioaddr->lbal_addr);
+ tf->lbam = readb(ioaddr->lbam_addr);
+ tf->lbah = readb(ioaddr->lbah_addr);
+ tf->device = readb(ioaddr->device_addr);
+
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ if (ioaddr->ctl_addr) {
+ writeb(tf->ctl | ATA_HOB, ioaddr->ctl_addr);
+
+ tf->hob_feature = readb(ioaddr->error_addr);
+ tf->hob_nsect = readb(ioaddr->nsect_addr);
+ tf->hob_lbal = readb(ioaddr->lbal_addr);
+ tf->hob_lbam = readb(ioaddr->lbam_addr);
+ tf->hob_lbah = readb(ioaddr->lbah_addr);
+
+ writeb(tf->ctl, ioaddr->ctl_addr);
+ ap->last_ctl = tf->ctl;
+ } else {
+ printf("sata_dwc warnning register read.\n");
+ }
+ }
+}
+
+static void __ata_qc_complete(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_link *link = qc->dev->link;
+
+ link->active_tag = ATA_TAG_POISON;
+ ap->nr_active_links--;
+
+ if (qc->flags & ATA_QCFLAG_CLEAR_EXCL && ap->excl_link == link)
+ ap->excl_link = NULL;
+
+ qc->flags &= ~ATA_QCFLAG_ACTIVE;
+ ap->qc_active &= ~(1 << qc->tag);
+}
+
+static void ata_qc_free(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ unsigned int tag;
+ qc->flags = 0;
+ tag = qc->tag;
+ if (tag < ATA_MAX_QUEUE) {
+ qc->tag = ATA_TAG_POISON;
+ clear_bit(tag, &ap->qc_allocated);
+ }
+}
+
+static int check_sata_dev_state(void)
+{
+ unsigned long datalen;
+ unsigned char *pdata;
+ int ret = 0;
+ int i = 0;
+ char temp_data_buf[512];
+
+ while (1) {
+ udelay(10000);
+
+ pdata = (unsigned char*)&temp_data_buf[0];
+ datalen = 512;
+
+ ret = ata_dev_read_sectors(pdata, datalen, 0, 1);
+
+ if (ret == true)
+ break;
+
+ i++;
+ if (i > (ATA_RESET_TIME * 100)) {
+ printf("** TimeOUT **\n");
+ dev_state = SATA_NODEVICE;
+ return false;
+ }
+
+ if ((i >= 100) && ((i % 100) == 0))
+ printf(".");
+ }
+
+ dev_state = SATA_READY;
+
+ return true;
+}
+
+static unsigned int ata_dev_set_feature(struct ata_device *dev,
+ u8 enable, u8 feature)
+{
+ struct ata_taskfile tf;
+ struct ata_port *ap;
+ ap = pap;
+ unsigned int err_mask;
+
+ memset(&tf, 0, sizeof(tf));
+ tf.ctl = ap->ctl;
+
+ tf.device = ATA_DEVICE_OBS;
+ tf.command = ATA_CMD_SET_FEATURES;
+ tf.feature = enable;
+ tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ tf.protocol = ATA_PROT_NODATA;
+ tf.nsect = feature;
+
+ err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, 0, 0);
+
+ return err_mask;
+}
+
+static unsigned int ata_dev_init_params(struct ata_device *dev,
+ u16 heads, u16 sectors)
+{
+ struct ata_taskfile tf;
+ struct ata_port *ap;
+ ap = pap;
+ unsigned int err_mask;
+
+ if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16)
+ return AC_ERR_INVALID;
+
+ memset(&tf, 0, sizeof(tf));
+ tf.ctl = ap->ctl;
+ tf.device = ATA_DEVICE_OBS;
+ tf.command = ATA_CMD_INIT_DEV_PARAMS;
+ tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ tf.protocol = ATA_PROT_NODATA;
+ tf.nsect = sectors;
+ tf.device |= (heads - 1) & 0x0f;
+
+ err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, 0, 0);
+
+ if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED))
+ err_mask = 0;
+
+ return err_mask;
+}
+
+#if defined(CONFIG_SATA_DWC) && !defined(CONFIG_LBA48)
+#define SATA_MAX_READ_BLK 0xFF
+#else
+#define SATA_MAX_READ_BLK 0xFFFF
+#endif
+
+ulong sata_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer)
+{
+ ulong start,blks, buf_addr;
+ unsigned short smallblks;
+ unsigned long datalen;
+ unsigned char *pdata;
+ device &= 0xff;
+
+ u32 block = 0;
+ u32 n_block = 0;
+
+ if (dev_state != SATA_READY)
+ return 0;
+
+ buf_addr = (unsigned long)buffer;
+ start = blknr;
+ blks = blkcnt;
+ do {
+ pdata = (unsigned char *)buf_addr;
+ if (blks > SATA_MAX_READ_BLK) {
+ datalen = sata_dev_desc[device].blksz * SATA_MAX_READ_BLK;
+ smallblks = SATA_MAX_READ_BLK;
+
+ block = (u32)start;
+ n_block = (u32)smallblks;
+
+ start += SATA_MAX_READ_BLK;
+ blks -= SATA_MAX_READ_BLK;
+ } else {
+ datalen = sata_dev_desc[device].blksz * SATA_MAX_READ_BLK;
+ datalen = sata_dev_desc[device].blksz * blks;
+ smallblks = (unsigned short)blks;
+
+ block = (u32)start;
+ n_block = (u32)smallblks;
+
+ start += blks;
+ blks = 0;
+ }
+
+ if (ata_dev_read_sectors(pdata, datalen, block, n_block) != true) {
+ printf("sata_dwc : Hard disk read error.\n");
+ blkcnt -= blks;
+ break;
+ }
+ buf_addr += datalen;
+ } while (blks != 0);
+
+ return (blkcnt);
+}
+
+static int ata_dev_read_sectors(unsigned char *pdata, unsigned long datalen,
+ u32 block, u32 n_block)
+{
+ struct ata_port *ap = pap;
+ struct ata_device *dev = &ata_device;
+ struct ata_taskfile tf;
+ unsigned int class = ATA_DEV_ATA;
+ unsigned int err_mask = 0;
+ const char *reason;
+ int may_fallback = 1;
+
+ if (dev_state == SATA_ERROR)
+ return false;
+
+ ata_dev_select(ap, dev->devno, 1, 1);
+
+retry:
+ memset(&tf, 0, sizeof(tf));
+ tf.ctl = ap->ctl;
+ ap->print_id = 1;
+ ap->flags &= ~ATA_FLAG_DISABLED;
+
+ ap->pdata = pdata;
+
+ tf.device = ATA_DEVICE_OBS;
+
+ temp_n_block = n_block;
+
+#ifdef CONFIG_LBA48
+ tf.command = ATA_CMD_PIO_READ_EXT;
+ tf.flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
+
+ tf.hob_feature = 31;
+ tf.feature = 31;
+ tf.hob_nsect = (n_block >> 8) & 0xff;
+ tf.nsect = n_block & 0xff;
+
+ tf.hob_lbah = 0x0;
+ tf.hob_lbam = 0x0;
+ tf.hob_lbal = (block >> 24) & 0xff;
+ tf.lbah = (block >> 16) & 0xff;
+ tf.lbam = (block >> 8) & 0xff;
+ tf.lbal = block & 0xff;
+
+ tf.device = 1 << 6;
+ if (tf.flags & ATA_TFLAG_FUA)
+ tf.device |= 1 << 7;
+#else
+ tf.command = ATA_CMD_PIO_READ;
+ tf.flags |= ATA_TFLAG_LBA ;
+
+ tf.feature = 31;
+ tf.nsect = n_block & 0xff;
+
+ tf.lbah = (block >> 16) & 0xff;
+ tf.lbam = (block >> 8) & 0xff;
+ tf.lbal = block & 0xff;
+
+ tf.device = (block >> 24) & 0xf;
+
+ tf.device |= 1 << 6;
+ if (tf.flags & ATA_TFLAG_FUA)
+ tf.device |= 1 << 7;
+
+#endif
+
+ tf.protocol = ATA_PROT_PIO;
+
+ /* Some devices choke if TF registers contain garbage. Make
+ * sure those are properly initialized.
+ */
+ tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ tf.flags |= ATA_TFLAG_POLLING;
+
+ err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, 0, 0);
+
+ if (err_mask) {
+ if (err_mask & AC_ERR_NODEV_HINT) {
+ printf("READ_SECTORS NODEV after polling detection\n");
+ return -ENOENT;
+ }
+
+ if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) {
+ /* Device or controller might have reported
+ * the wrong device class. Give a shot at the
+ * other IDENTIFY if the current one is
+ * aborted by the device.
+ */
+ if (may_fallback) {
+ may_fallback = 0;
+
+ if (class == ATA_DEV_ATA) {
+ class = ATA_DEV_ATAPI;
+ } else {
+ class = ATA_DEV_ATA;
+ }
+ goto retry;
+ }
+ /* Control reaches here iff the device aborted
+ * both flavors of IDENTIFYs which happens
+ * sometimes with phantom devices.
+ */
+ printf("both IDENTIFYs aborted, assuming NODEV\n");
+ return -ENOENT;
+ }
+
+ reason = "I/O error";
+ goto err_out;
+ }
+
+ return true;
+
+err_out:
+ printf("failed to READ SECTORS (%s, err_mask=0x%x)\n", reason, err_mask);
+ return false;
+}
+
+#if defined(CONFIG_SATA_DWC) && !defined(CONFIG_LBA48)
+#define SATA_MAX_WRITE_BLK 0xFF
+#else
+#define SATA_MAX_WRITE_BLK 0xFFFF
+#endif
+
+ulong sata_write(int device, ulong blknr, lbaint_t blkcnt, const void *buffer)
+{
+ ulong start,blks, buf_addr;
+ unsigned short smallblks;
+ unsigned long datalen;
+ unsigned char *pdata;
+ device &= 0xff;
+
+
+ u32 block = 0;
+ u32 n_block = 0;
+
+ if (dev_state != SATA_READY)
+ return 0;
+
+ buf_addr = (unsigned long)buffer;
+ start = blknr;
+ blks = blkcnt;
+ do {
+ pdata = (unsigned char *)buf_addr;
+ if (blks > SATA_MAX_WRITE_BLK) {
+ datalen = sata_dev_desc[device].blksz * SATA_MAX_WRITE_BLK;
+ smallblks = SATA_MAX_WRITE_BLK;
+
+ block = (u32)start;
+ n_block = (u32)smallblks;
+
+ start += SATA_MAX_WRITE_BLK;
+ blks -= SATA_MAX_WRITE_BLK;
+ } else {
+ datalen = sata_dev_desc[device].blksz * blks;
+ smallblks = (unsigned short)blks;
+
+ block = (u32)start;
+ n_block = (u32)smallblks;
+
+ start += blks;
+ blks = 0;
+ }
+
+ if (ata_dev_write_sectors(pdata, datalen, block, n_block) != true) {
+ printf("sata_dwc : Hard disk read error.\n");
+ blkcnt -= blks;
+ break;
+ }
+ buf_addr += datalen;
+ } while (blks != 0);
+
+ return (blkcnt);
+}
+
+static int ata_dev_write_sectors(unsigned char* pdata, unsigned long datalen,
+ u32 block, u32 n_block)
+{
+ struct ata_port *ap = pap;
+ struct ata_device *dev = &ata_device;
+ struct ata_taskfile tf;
+ unsigned int class = ATA_DEV_ATA;
+ unsigned int err_mask = 0;
+ const char *reason;
+ int may_fallback = 1;
+
+ if (dev_state == SATA_ERROR)
+ return false;
+
+ ata_dev_select(ap, dev->devno, 1, 1);
+
+retry:
+ memset(&tf, 0, sizeof(tf));
+ tf.ctl = ap->ctl;
+ ap->print_id = 1;
+ ap->flags &= ~ATA_FLAG_DISABLED;
+
+ ap->pdata = pdata;
+
+ tf.device = ATA_DEVICE_OBS;
+
+ temp_n_block = n_block;
+
+
+#ifdef CONFIG_LBA48
+ tf.command = ATA_CMD_PIO_WRITE_EXT;
+ tf.flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48 | ATA_TFLAG_WRITE;
+
+ tf.hob_feature = 31;
+ tf.feature = 31;
+ tf.hob_nsect = (n_block >> 8) & 0xff;
+ tf.nsect = n_block & 0xff;
+
+ tf.hob_lbah = 0x0;
+ tf.hob_lbam = 0x0;
+ tf.hob_lbal = (block >> 24) & 0xff;
+ tf.lbah = (block >> 16) & 0xff;
+ tf.lbam = (block >> 8) & 0xff;
+ tf.lbal = block & 0xff;
+
+ tf.device = 1 << 6;
+ if (tf.flags & ATA_TFLAG_FUA)
+ tf.device |= 1 << 7;
+#else
+ tf.command = ATA_CMD_PIO_WRITE;
+ tf.flags |= ATA_TFLAG_LBA | ATA_TFLAG_WRITE;
+
+ tf.feature = 31;
+ tf.nsect = n_block & 0xff;
+
+ tf.lbah = (block >> 16) & 0xff;
+ tf.lbam = (block >> 8) & 0xff;
+ tf.lbal = block & 0xff;
+
+ tf.device = (block >> 24) & 0xf;
+
+ tf.device |= 1 << 6;
+ if (tf.flags & ATA_TFLAG_FUA)
+ tf.device |= 1 << 7;
+
+#endif
+
+ tf.protocol = ATA_PROT_PIO;
+
+ /* Some devices choke if TF registers contain garbage. Make
+ * sure those are properly initialized.
+ */
+ tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ tf.flags |= ATA_TFLAG_POLLING;
+
+ err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, 0, 0);
+
+ if (err_mask) {
+ if (err_mask & AC_ERR_NODEV_HINT) {
+ printf("READ_SECTORS NODEV after polling detection\n");
+ return -ENOENT;
+ }
+
+ if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) {
+ /* Device or controller might have reported
+ * the wrong device class. Give a shot at the
+ * other IDENTIFY if the current one is
+ * aborted by the device.
+ */
+ if (may_fallback) {
+ may_fallback = 0;
+
+ if (class == ATA_DEV_ATA) {
+ class = ATA_DEV_ATAPI;
+ } else {
+ class = ATA_DEV_ATA;
+ }
+ goto retry;
+ }
+ /* Control reaches here iff the device aborted
+ * both flavors of IDENTIFYs which happens
+ * sometimes with phantom devices.
+ */
+ printf("both IDENTIFYs aborted, assuming NODEV\n");
+ return -ENOENT;
+ }
+
+ reason = "I/O error";
+ goto err_out;
+ }
+
+ return true;
+
+err_out:
+ printf("failed to WRITE SECTORS (%s, err_mask=0x%x)\n", reason, err_mask);
+ return false;
+}
diff --git a/drivers/ata/sata_dwc.h b/drivers/ata/sata_dwc.h
new file mode 100644
index 0000000000..e2d9e0c1fc
--- /dev/null
+++ b/drivers/ata/sata_dwc.h
@@ -0,0 +1,465 @@
+/*
+ * sata_dwc.h
+ *
+ * Synopsys DesignWare Cores (DWC) SATA host driver
+ *
+ * Author: Mark Miesfeld <mmiesfeld@amcc.com>
+ *
+ * Ported from 2.6.19.2 to 2.6.25/26 by Stefan Roese <sr@denx.de>
+ * Copyright 2008 DENX Software Engineering
+ *
+ * Based on versions provided by AMCC and Synopsys which are:
+ * Copyright 2006 Applied Micro Circuits Corporation
+ * COPYRIGHT (C) 2005 SYNOPSYS, INC. ALL RIGHTS RESERVED
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+/*
+ * SATA support based on the chip canyonlands.
+ *
+ * 04-17-2009
+ * The local version of this driver for the canyonlands board
+ * does not use interrupts but polls the chip instead.
+ */
+
+
+#ifndef _SATA_DWC_H_
+#define _SATA_DWC_H_
+
+#define __U_BOOT__
+
+#define HZ 100
+#define READ 0
+#define WRITE 1
+
+enum {
+ ATA_READID_POSTRESET = (1 << 0),
+
+ ATA_DNXFER_PIO = 0,
+ ATA_DNXFER_DMA = 1,
+ ATA_DNXFER_40C = 2,
+ ATA_DNXFER_FORCE_PIO = 3,
+ ATA_DNXFER_FORCE_PIO0 = 4,
+
+ ATA_DNXFER_QUIET = (1 << 31),
+};
+
+enum hsm_task_states {
+ HSM_ST_IDLE,
+ HSM_ST_FIRST,
+ HSM_ST,
+ HSM_ST_LAST,
+ HSM_ST_ERR,
+};
+
+#define ATA_SHORT_PAUSE ((HZ >> 6) + 1)
+
+struct ata_queued_cmd {
+ struct ata_port *ap;
+ struct ata_device *dev;
+
+ struct ata_taskfile tf;
+ u8 cdb[ATAPI_CDB_LEN];
+ unsigned long flags;
+ unsigned int tag;
+ unsigned int n_elem;
+
+ int dma_dir;
+ unsigned int sect_size;
+
+ unsigned int nbytes;
+ unsigned int extrabytes;
+ unsigned int curbytes;
+
+ unsigned int err_mask;
+ struct ata_taskfile result_tf;
+
+ void *private_data;
+#ifndef __U_BOOT__
+ void *lldd_task;
+#endif
+ unsigned char *pdata;
+};
+
+typedef void (*ata_qc_cb_t) (struct ata_queued_cmd *qc);
+
+#define ATA_TAG_POISON 0xfafbfcfdU
+
+enum {
+ LIBATA_MAX_PRD = ATA_MAX_PRD / 2,
+ LIBATA_DUMB_MAX_PRD = ATA_MAX_PRD / 4,
+ ATA_MAX_PORTS = 8,
+ ATA_DEF_QUEUE = 1,
+ ATA_MAX_QUEUE = 32,
+ ATA_TAG_INTERNAL = ATA_MAX_QUEUE - 1,
+ ATA_MAX_BUS = 2,
+ ATA_DEF_BUSY_WAIT = 10000,
+
+ ATAPI_MAX_DRAIN = 16 << 10,
+
+ ATA_SHT_EMULATED = 1,
+ ATA_SHT_CMD_PER_LUN = 1,
+ ATA_SHT_THIS_ID = -1,
+ ATA_SHT_USE_CLUSTERING = 1,
+
+ ATA_DFLAG_LBA = (1 << 0),
+ ATA_DFLAG_LBA48 = (1 << 1),
+ ATA_DFLAG_CDB_INTR = (1 << 2),
+ ATA_DFLAG_NCQ = (1 << 3),
+ ATA_DFLAG_FLUSH_EXT = (1 << 4),
+ ATA_DFLAG_ACPI_PENDING = (1 << 5),
+ ATA_DFLAG_ACPI_FAILED = (1 << 6),
+ ATA_DFLAG_AN = (1 << 7),
+ ATA_DFLAG_HIPM = (1 << 8),
+ ATA_DFLAG_DIPM = (1 << 9),
+ ATA_DFLAG_DMADIR = (1 << 10),
+ ATA_DFLAG_CFG_MASK = (1 << 12) - 1,
+
+ ATA_DFLAG_PIO = (1 << 12),
+ ATA_DFLAG_NCQ_OFF = (1 << 13),
+ ATA_DFLAG_SPUNDOWN = (1 << 14),
+ ATA_DFLAG_SLEEPING = (1 << 15),
+ ATA_DFLAG_DUBIOUS_XFER = (1 << 16),
+ ATA_DFLAG_INIT_MASK = (1 << 24) - 1,
+
+ ATA_DFLAG_DETACH = (1 << 24),
+ ATA_DFLAG_DETACHED = (1 << 25),
+
+ ATA_LFLAG_HRST_TO_RESUME = (1 << 0),
+ ATA_LFLAG_SKIP_D2H_BSY = (1 << 1),
+ ATA_LFLAG_NO_SRST = (1 << 2),
+ ATA_LFLAG_ASSUME_ATA = (1 << 3),
+ ATA_LFLAG_ASSUME_SEMB = (1 << 4),
+ ATA_LFLAG_ASSUME_CLASS = ATA_LFLAG_ASSUME_ATA | ATA_LFLAG_ASSUME_SEMB,
+ ATA_LFLAG_NO_RETRY = (1 << 5),
+ ATA_LFLAG_DISABLED = (1 << 6),
+
+ ATA_FLAG_SLAVE_POSS = (1 << 0),
+ ATA_FLAG_SATA = (1 << 1),
+ ATA_FLAG_NO_LEGACY = (1 << 2),
+ ATA_FLAG_MMIO = (1 << 3),
+ ATA_FLAG_SRST = (1 << 4),
+ ATA_FLAG_SATA_RESET = (1 << 5),
+ ATA_FLAG_NO_ATAPI = (1 << 6),
+ ATA_FLAG_PIO_DMA = (1 << 7),
+ ATA_FLAG_PIO_LBA48 = (1 << 8),
+ ATA_FLAG_PIO_POLLING = (1 << 9),
+ ATA_FLAG_NCQ = (1 << 10),
+ ATA_FLAG_DEBUGMSG = (1 << 13),
+ ATA_FLAG_IGN_SIMPLEX = (1 << 15),
+ ATA_FLAG_NO_IORDY = (1 << 16),
+ ATA_FLAG_ACPI_SATA = (1 << 17),
+ ATA_FLAG_AN = (1 << 18),
+ ATA_FLAG_PMP = (1 << 19),
+ ATA_FLAG_IPM = (1 << 20),
+
+ ATA_FLAG_DISABLED = (1 << 23),
+
+ ATA_PFLAG_EH_PENDING = (1 << 0),
+ ATA_PFLAG_EH_IN_PROGRESS = (1 << 1),
+ ATA_PFLAG_FROZEN = (1 << 2),
+ ATA_PFLAG_RECOVERED = (1 << 3),
+ ATA_PFLAG_LOADING = (1 << 4),
+ ATA_PFLAG_UNLOADING = (1 << 5),
+ ATA_PFLAG_SCSI_HOTPLUG = (1 << 6),
+ ATA_PFLAG_INITIALIZING = (1 << 7),
+ ATA_PFLAG_RESETTING = (1 << 8),
+ ATA_PFLAG_SUSPENDED = (1 << 17),
+ ATA_PFLAG_PM_PENDING = (1 << 18),
+
+ ATA_QCFLAG_ACTIVE = (1 << 0),
+ ATA_QCFLAG_DMAMAP = (1 << 1),
+ ATA_QCFLAG_IO = (1 << 3),
+ ATA_QCFLAG_RESULT_TF = (1 << 4),
+ ATA_QCFLAG_CLEAR_EXCL = (1 << 5),
+ ATA_QCFLAG_QUIET = (1 << 6),
+
+ ATA_QCFLAG_FAILED = (1 << 16),
+ ATA_QCFLAG_SENSE_VALID = (1 << 17),
+ ATA_QCFLAG_EH_SCHEDULED = (1 << 18),
+
+ ATA_HOST_SIMPLEX = (1 << 0),
+ ATA_HOST_STARTED = (1 << 1),
+
+ ATA_TMOUT_BOOT = 30 * 100,
+ ATA_TMOUT_BOOT_QUICK = 7 * 100,
+ ATA_TMOUT_INTERNAL = 30 * 100,
+ ATA_TMOUT_INTERNAL_QUICK = 5 * 100,
+
+ /* FIXME: GoVault needs 2s but we can't afford that without
+ * parallel probing. 800ms is enough for iVDR disk
+ * HHD424020F7SV00. Increase to 2secs when parallel probing
+ * is in place.
+ */
+ ATA_TMOUT_FF_WAIT = 4 * 100 / 5,
+
+ BUS_UNKNOWN = 0,
+ BUS_DMA = 1,
+ BUS_IDLE = 2,
+ BUS_NOINTR = 3,
+ BUS_NODATA = 4,
+ BUS_TIMER = 5,
+ BUS_PIO = 6,
+ BUS_EDD = 7,
+ BUS_IDENTIFY = 8,
+ BUS_PACKET = 9,
+
+ PORT_UNKNOWN = 0,
+ PORT_ENABLED = 1,
+ PORT_DISABLED = 2,
+
+ /* encoding various smaller bitmaps into a single
+ * unsigned long bitmap
+ */
+ ATA_NR_PIO_MODES = 7,
+ ATA_NR_MWDMA_MODES = 5,
+ ATA_NR_UDMA_MODES = 8,
+
+ ATA_SHIFT_PIO = 0,
+ ATA_SHIFT_MWDMA = ATA_SHIFT_PIO + ATA_NR_PIO_MODES,
+ ATA_SHIFT_UDMA = ATA_SHIFT_MWDMA + ATA_NR_MWDMA_MODES,
+
+ ATA_DMA_PAD_SZ = 4,
+
+ ATA_ERING_SIZE = 32,
+
+ ATA_DEFER_LINK = 1,
+ ATA_DEFER_PORT = 2,
+
+ ATA_EH_DESC_LEN = 80,
+
+ ATA_EH_REVALIDATE = (1 << 0),
+ ATA_EH_SOFTRESET = (1 << 1),
+ ATA_EH_HARDRESET = (1 << 2),
+ ATA_EH_ENABLE_LINK = (1 << 3),
+ ATA_EH_LPM = (1 << 4),
+
+ ATA_EH_RESET_MASK = ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
+ ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE,
+
+ ATA_EHI_HOTPLUGGED = (1 << 0),
+ ATA_EHI_RESUME_LINK = (1 << 1),
+ ATA_EHI_NO_AUTOPSY = (1 << 2),
+ ATA_EHI_QUIET = (1 << 3),
+
+ ATA_EHI_DID_SOFTRESET = (1 << 16),
+ ATA_EHI_DID_HARDRESET = (1 << 17),
+ ATA_EHI_PRINTINFO = (1 << 18),
+ ATA_EHI_SETMODE = (1 << 19),
+ ATA_EHI_POST_SETMODE = (1 << 20),
+
+ ATA_EHI_DID_RESET = ATA_EHI_DID_SOFTRESET | ATA_EHI_DID_HARDRESET,
+ ATA_EHI_RESET_MODIFIER_MASK = ATA_EHI_RESUME_LINK,
+
+ ATA_EH_MAX_TRIES = 5,
+
+ ATA_PROBE_MAX_TRIES = 3,
+ ATA_EH_DEV_TRIES = 3,
+ ATA_EH_PMP_TRIES = 5,
+ ATA_EH_PMP_LINK_TRIES = 3,
+
+ SATA_PMP_SCR_TIMEOUT = 250,
+
+ /* Horkage types. May be set by libata or controller on drives
+ (some horkage may be drive/controller pair dependant */
+
+ ATA_HORKAGE_DIAGNOSTIC = (1 << 0),
+ ATA_HORKAGE_NODMA = (1 << 1),
+ ATA_HORKAGE_NONCQ = (1 << 2),
+ ATA_HORKAGE_MAX_SEC_128 = (1 << 3),
+ ATA_HORKAGE_BROKEN_HPA = (1 << 4),
+ ATA_HORKAGE_SKIP_PM = (1 << 5),
+ ATA_HORKAGE_HPA_SIZE = (1 << 6),
+ ATA_HORKAGE_IPM = (1 << 7),
+ ATA_HORKAGE_IVB = (1 << 8),
+ ATA_HORKAGE_STUCK_ERR = (1 << 9),
+
+ ATA_DMA_MASK_ATA = (1 << 0),
+ ATA_DMA_MASK_ATAPI = (1 << 1),
+ ATA_DMA_MASK_CFA = (1 << 2),
+
+ ATAPI_READ = 0,
+ ATAPI_WRITE = 1,
+ ATAPI_READ_CD = 2,
+ ATAPI_PASS_THRU = 3,
+ ATAPI_MISC = 4,
+};
+
+enum ata_completion_errors {
+ AC_ERR_DEV = (1 << 0),
+ AC_ERR_HSM = (1 << 1),
+ AC_ERR_TIMEOUT = (1 << 2),
+ AC_ERR_MEDIA = (1 << 3),
+ AC_ERR_ATA_BUS = (1 << 4),
+ AC_ERR_HOST_BUS = (1 << 5),
+ AC_ERR_SYSTEM = (1 << 6),
+ AC_ERR_INVALID = (1 << 7),
+ AC_ERR_OTHER = (1 << 8),
+ AC_ERR_NODEV_HINT = (1 << 9),
+ AC_ERR_NCQ = (1 << 10),
+};
+
+enum ata_xfer_mask {
+ ATA_MASK_PIO = ((1LU << ATA_NR_PIO_MODES) - 1) << ATA_SHIFT_PIO,
+ ATA_MASK_MWDMA = ((1LU << ATA_NR_MWDMA_MODES) - 1) << ATA_SHIFT_MWDMA,
+ ATA_MASK_UDMA = ((1LU << ATA_NR_UDMA_MODES) - 1) << ATA_SHIFT_UDMA,
+};
+
+struct ata_port_info {
+#ifndef __U_BOOT__
+ struct scsi_host_template *sht;
+#endif
+ unsigned long flags;
+ unsigned long link_flags;
+ unsigned long pio_mask;
+ unsigned long mwdma_mask;
+ unsigned long udma_mask;
+#ifndef __U_BOOT__
+ const struct ata_port_operations *port_ops;
+ void *private_data;
+#endif
+};
+
+struct ata_ioports {
+ void __iomem *cmd_addr;
+ void __iomem *data_addr;
+ void __iomem *error_addr;
+ void __iomem *feature_addr;
+ void __iomem *nsect_addr;
+ void __iomem *lbal_addr;
+ void __iomem *lbam_addr;
+ void __iomem *lbah_addr;
+ void __iomem *device_addr;
+ void __iomem *status_addr;
+ void __iomem *command_addr;
+ void __iomem *altstatus_addr;
+ void __iomem *ctl_addr;
+#ifndef __U_BOOT__
+ void __iomem *bmdma_addr;
+#endif
+ void __iomem *scr_addr;
+};
+
+struct ata_host {
+#ifndef __U_BOOT__
+ void __iomem * const *iomap;
+ void *private_data;
+ const struct ata_port_operations *ops;
+ unsigned long flags;
+ struct ata_port *simplex_claimed;
+#endif
+ unsigned int n_ports;
+ struct ata_port *ports[0];
+};
+
+#ifndef __U_BOOT__
+struct ata_port_stats {
+ unsigned long unhandled_irq;
+ unsigned long idle_irq;
+ unsigned long rw_reqbuf;
+};
+#endif
+
+struct ata_device {
+ struct ata_link *link;
+ unsigned int devno;
+ unsigned long flags;
+ unsigned int horkage;
+#ifndef __U_BOOT__
+ struct scsi_device *sdev;
+#ifdef CONFIG_ATA_ACPI
+ acpi_handle acpi_handle;
+ union acpi_object *gtf_cache;
+#endif
+#endif
+ u64 n_sectors;
+ unsigned int class;
+
+ union {
+ u16 id[ATA_ID_WORDS];
+ u32 gscr[SATA_PMP_GSCR_DWORDS];
+ };
+#ifndef __U_BOOT__
+ u8 pio_mode;
+ u8 dma_mode;
+ u8 xfer_mode;
+ unsigned int xfer_shift;
+#endif
+ unsigned int multi_count;
+ unsigned int max_sectors;
+ unsigned int cdb_len;
+#ifndef __U_BOOT__
+ unsigned long pio_mask;
+ unsigned long mwdma_mask;
+#endif
+ unsigned long udma_mask;
+ u16 cylinders;
+ u16 heads;
+ u16 sectors;
+#ifndef __U_BOOT__
+ int spdn_cnt;
+#endif
+};
+
+enum dma_data_direction {
+ DMA_BIDIRECTIONAL = 0,
+ DMA_TO_DEVICE = 1,
+ DMA_FROM_DEVICE = 2,
+ DMA_NONE = 3,
+};
+
+struct ata_link {
+ struct ata_port *ap;
+ int pmp;
+ unsigned int active_tag;
+ u32 sactive;
+ unsigned int flags;
+ unsigned int hw_sata_spd_limit;
+#ifndef __U_BOOT__
+ unsigned int sata_spd_limit;
+ unsigned int sata_spd;
+ struct ata_device device[2];
+#endif
+};
+
+struct ata_port {
+ unsigned long flags;
+ unsigned int pflags;
+ unsigned int print_id;
+ unsigned int port_no;
+
+ struct ata_ioports ioaddr;
+
+ u8 ctl;
+ u8 last_ctl;
+ unsigned int pio_mask;
+ unsigned int mwdma_mask;
+ unsigned int udma_mask;
+ unsigned int cbl;
+
+ struct ata_queued_cmd qcmd[ATA_MAX_QUEUE];
+ unsigned long qc_allocated;
+ unsigned int qc_active;
+ int nr_active_links;
+
+ struct ata_link link;
+#ifndef __U_BOOT__
+ int nr_pmp_links;
+ struct ata_link *pmp_link;
+#endif
+ struct ata_link *excl_link;
+ int nr_pmp_links;
+#ifndef __U_BOOT__
+ struct ata_port_stats stats;
+ struct device *dev;
+ u32 msg_enable;
+#endif
+ struct ata_host *host;
+ void *port_task_data;
+
+ unsigned int hsm_task_state;
+ void *private_data;
+ unsigned char *pdata;
+};
+
+#endif
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
new file mode 100644
index 0000000000..78e3da442d
--- /dev/null
+++ b/drivers/ata/sata_mv.c
@@ -0,0 +1,1051 @@
+/*
+ * Copyright (C) Excito Elektronik i Skåne AB, 2010.
+ * Author: Tor Krill <tor@excito.com>
+ *
+ * Copyright (C) 2015 Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * This driver supports the SATA controller of some Mavell SoC's.
+ * Here a (most likely incomplete) list of the supported SoC's:
+ * - Kirkwood
+ * - Armada 370
+ * - Armada XP
+ *
+ * This driver implementation is an alternative to the already available
+ * driver via the "ide" commands interface (drivers/block/mvsata_ide.c).
+ * But this driver only supports PIO mode and as this new driver also
+ * supports transfer via DMA, its much faster.
+ *
+ * Please note, that the newer SoC's (e.g. Armada 38x) are not supported
+ * by this driver. As they have an AHCI compatible SATA controller
+ * integrated.
+ */
+
+/*
+ * TODO:
+ * Better error recovery
+ * No support for using PRDs (Thus max 64KB transfers)
+ * No NCQ support
+ * No port multiplier support
+ */
+
+#include <common.h>
+#include <fis.h>
+#include <libata.h>
+#include <malloc.h>
+#include <sata.h>
+#include <linux/errno.h>
+#include <asm/io.h>
+#include <linux/mbus.h>
+
+#if defined(CONFIG_KIRKWOOD)
+#include <asm/arch/kirkwood.h>
+#define SATAHC_BASE KW_SATA_BASE
+#else
+#include <asm/arch/soc.h>
+#define SATAHC_BASE MVEBU_AXP_SATA_BASE
+#endif
+
+#define SATA0_BASE (SATAHC_BASE + 0x2000)
+#define SATA1_BASE (SATAHC_BASE + 0x4000)
+
+/* EDMA registers */
+#define EDMA_CFG 0x000
+#define EDMA_CFG_NCQ (1 << 5)
+#define EDMA_CFG_EQUE (1 << 9)
+#define EDMA_TIMER 0x004
+#define EDMA_IECR 0x008
+#define EDMA_IEMR 0x00c
+#define EDMA_RQBA_HI 0x010
+#define EDMA_RQIPR 0x014
+#define EDMA_RQIPR_IPMASK (0x1f << 5)
+#define EDMA_RQIPR_IPSHIFT 5
+#define EDMA_RQOPR 0x018
+#define EDMA_RQOPR_OPMASK (0x1f << 5)
+#define EDMA_RQOPR_OPSHIFT 5
+#define EDMA_RSBA_HI 0x01c
+#define EDMA_RSIPR 0x020
+#define EDMA_RSIPR_IPMASK (0x1f << 3)
+#define EDMA_RSIPR_IPSHIFT 3
+#define EDMA_RSOPR 0x024
+#define EDMA_RSOPR_OPMASK (0x1f << 3)
+#define EDMA_RSOPR_OPSHIFT 3
+#define EDMA_CMD 0x028
+#define EDMA_CMD_ENEDMA (0x01 << 0)
+#define EDMA_CMD_DISEDMA (0x01 << 1)
+#define EDMA_CMD_ATARST (0x01 << 2)
+#define EDMA_CMD_FREEZE (0x01 << 4)
+#define EDMA_TEST_CTL 0x02c
+#define EDMA_STATUS 0x030
+#define EDMA_IORTO 0x034
+#define EDMA_CDTR 0x040
+#define EDMA_HLTCND 0x060
+#define EDMA_NTSR 0x094
+
+/* Basic DMA registers */
+#define BDMA_CMD 0x224
+#define BDMA_STATUS 0x228
+#define BDMA_DTLB 0x22c
+#define BDMA_DTHB 0x230
+#define BDMA_DRL 0x234
+#define BDMA_DRH 0x238
+
+/* SATA Interface registers */
+#define SIR_ICFG 0x050
+#define SIR_CFG_GEN2EN (0x1 << 7)
+#define SIR_PLL_CFG 0x054
+#define SIR_SSTATUS 0x300
+#define SSTATUS_DET_MASK (0x0f << 0)
+#define SIR_SERROR 0x304
+#define SIR_SCONTROL 0x308
+#define SIR_SCONTROL_DETEN (0x01 << 0)
+#define SIR_LTMODE 0x30c
+#define SIR_LTMODE_NELBE (0x01 << 7)
+#define SIR_PHYMODE3 0x310
+#define SIR_PHYMODE4 0x314
+#define SIR_PHYMODE1 0x32c
+#define SIR_PHYMODE2 0x330
+#define SIR_BIST_CTRL 0x334
+#define SIR_BIST_DW1 0x338
+#define SIR_BIST_DW2 0x33c
+#define SIR_SERR_IRQ_MASK 0x340
+#define SIR_SATA_IFCTRL 0x344
+#define SIR_SATA_TESTCTRL 0x348
+#define SIR_SATA_IFSTATUS 0x34c
+#define SIR_VEND_UNIQ 0x35c
+#define SIR_FIS_CFG 0x360
+#define SIR_FIS_IRQ_CAUSE 0x364
+#define SIR_FIS_IRQ_MASK 0x368
+#define SIR_FIS_DWORD0 0x370
+#define SIR_FIS_DWORD1 0x374
+#define SIR_FIS_DWORD2 0x378
+#define SIR_FIS_DWORD3 0x37c
+#define SIR_FIS_DWORD4 0x380
+#define SIR_FIS_DWORD5 0x384
+#define SIR_FIS_DWORD6 0x388
+#define SIR_PHYM9_GEN2 0x398
+#define SIR_PHYM9_GEN1 0x39c
+#define SIR_PHY_CFG 0x3a0
+#define SIR_PHYCTL 0x3a4
+#define SIR_PHYM10 0x3a8
+#define SIR_PHYM12 0x3b0
+
+/* Shadow registers */
+#define PIO_DATA 0x100
+#define PIO_ERR_FEATURES 0x104
+#define PIO_SECTOR_COUNT 0x108
+#define PIO_LBA_LOW 0x10c
+#define PIO_LBA_MID 0x110
+#define PIO_LBA_HI 0x114
+#define PIO_DEVICE 0x118
+#define PIO_CMD_STATUS 0x11c
+#define PIO_STATUS_ERR (0x01 << 0)
+#define PIO_STATUS_DRQ (0x01 << 3)
+#define PIO_STATUS_DF (0x01 << 5)
+#define PIO_STATUS_DRDY (0x01 << 6)
+#define PIO_STATUS_BSY (0x01 << 7)
+#define PIO_CTRL_ALTSTAT 0x120
+
+/* SATAHC arbiter registers */
+#define SATAHC_CFG 0x000
+#define SATAHC_RQOP 0x004
+#define SATAHC_RQIP 0x008
+#define SATAHC_ICT 0x00c
+#define SATAHC_ITT 0x010
+#define SATAHC_ICR 0x014
+#define SATAHC_ICR_PORT0 (0x01 << 0)
+#define SATAHC_ICR_PORT1 (0x01 << 1)
+#define SATAHC_MIC 0x020
+#define SATAHC_MIM 0x024
+#define SATAHC_LED_CFG 0x02c
+
+#define REQUEST_QUEUE_SIZE 32
+#define RESPONSE_QUEUE_SIZE REQUEST_QUEUE_SIZE
+
+struct crqb {
+ u32 dtb_low; /* DW0 */
+ u32 dtb_high; /* DW1 */
+ u32 control_flags; /* DW2 */
+ u32 drb_count; /* DW3 */
+ u32 ata_cmd_feat; /* DW4 */
+ u32 ata_addr; /* DW5 */
+ u32 ata_addr_exp; /* DW6 */
+ u32 ata_sect_count; /* DW7 */
+};
+
+#define CRQB_ALIGN 0x400
+
+#define CRQB_CNTRLFLAGS_DIR (0x01 << 0)
+#define CRQB_CNTRLFLAGS_DQTAGMASK (0x1f << 1)
+#define CRQB_CNTRLFLAGS_DQTAGSHIFT 1
+#define CRQB_CNTRLFLAGS_PMPORTMASK (0x0f << 12)
+#define CRQB_CNTRLFLAGS_PMPORTSHIFT 12
+#define CRQB_CNTRLFLAGS_PRDMODE (0x01 << 16)
+#define CRQB_CNTRLFLAGS_HQTAGMASK (0x1f << 17)
+#define CRQB_CNTRLFLAGS_HQTAGSHIFT 17
+
+#define CRQB_CMDFEAT_CMDMASK (0xff << 16)
+#define CRQB_CMDFEAT_CMDSHIFT 16
+#define CRQB_CMDFEAT_FEATMASK (0xff << 16)
+#define CRQB_CMDFEAT_FEATSHIFT 24
+
+#define CRQB_ADDR_LBA_LOWMASK (0xff << 0)
+#define CRQB_ADDR_LBA_LOWSHIFT 0
+#define CRQB_ADDR_LBA_MIDMASK (0xff << 8)
+#define CRQB_ADDR_LBA_MIDSHIFT 8
+#define CRQB_ADDR_LBA_HIGHMASK (0xff << 16)
+#define CRQB_ADDR_LBA_HIGHSHIFT 16
+#define CRQB_ADDR_DEVICE_MASK (0xff << 24)
+#define CRQB_ADDR_DEVICE_SHIFT 24
+
+#define CRQB_ADDR_LBA_LOW_EXP_MASK (0xff << 0)
+#define CRQB_ADDR_LBA_LOW_EXP_SHIFT 0
+#define CRQB_ADDR_LBA_MID_EXP_MASK (0xff << 8)
+#define CRQB_ADDR_LBA_MID_EXP_SHIFT 8
+#define CRQB_ADDR_LBA_HIGH_EXP_MASK (0xff << 16)
+#define CRQB_ADDR_LBA_HIGH_EXP_SHIFT 16
+#define CRQB_ADDR_FEATURE_EXP_MASK (0xff << 24)
+#define CRQB_ADDR_FEATURE_EXP_SHIFT 24
+
+#define CRQB_SECTCOUNT_COUNT_MASK (0xff << 0)
+#define CRQB_SECTCOUNT_COUNT_SHIFT 0
+#define CRQB_SECTCOUNT_COUNT_EXP_MASK (0xff << 8)
+#define CRQB_SECTCOUNT_COUNT_EXP_SHIFT 8
+
+#define MVSATA_WIN_CONTROL(w) (MVEBU_AXP_SATA_BASE + 0x30 + ((w) << 4))
+#define MVSATA_WIN_BASE(w) (MVEBU_AXP_SATA_BASE + 0x34 + ((w) << 4))
+
+struct eprd {
+ u32 phyaddr_low;
+ u32 bytecount_eot;
+ u32 phyaddr_hi;
+ u32 reserved;
+};
+
+#define EPRD_PHYADDR_MASK 0xfffffffe
+#define EPRD_BYTECOUNT_MASK 0x0000ffff
+#define EPRD_EOT (0x01 << 31)
+
+struct crpb {
+ u32 id;
+ u32 flags;
+ u32 timestamp;
+};
+
+#define CRPB_ALIGN 0x100
+
+#define READ_CMD 0
+#define WRITE_CMD 1
+
+/*
+ * Since we don't use PRDs yet max transfer size
+ * is 64KB
+ */
+#define MV_ATA_MAX_SECTORS (65535 / ATA_SECT_SIZE)
+
+/* Keep track if hw is initialized or not */
+static u32 hw_init;
+
+struct mv_priv {
+ char name[12];
+ u32 link;
+ u32 regbase;
+ u32 queue_depth;
+ u16 pio;
+ u16 mwdma;
+ u16 udma;
+
+ void *crqb_alloc;
+ struct crqb *request;
+
+ void *crpb_alloc;
+ struct crpb *response;
+};
+
+static int ata_wait_register(u32 *addr, u32 mask, u32 val, u32 timeout_msec)
+{
+ ulong start;
+
+ start = get_timer(0);
+ do {
+ if ((in_le32(addr) & mask) == val)
+ return 0;
+ } while (get_timer(start) < timeout_msec);
+
+ return -ETIMEDOUT;
+}
+
+/* Cut from sata_mv in linux kernel */
+static int mv_stop_edma_engine(int port)
+{
+ struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+ int i;
+
+ /* Disable eDMA. The disable bit auto clears. */
+ out_le32(priv->regbase + EDMA_CMD, EDMA_CMD_DISEDMA);
+
+ /* Wait for the chip to confirm eDMA is off. */
+ for (i = 10000; i > 0; i--) {
+ u32 reg = in_le32(priv->regbase + EDMA_CMD);
+ if (!(reg & EDMA_CMD_ENEDMA)) {
+ debug("EDMA stop on port %d succesful\n", port);
+ return 0;
+ }
+ udelay(10);
+ }
+ debug("EDMA stop on port %d failed\n", port);
+ return -1;
+}
+
+static int mv_start_edma_engine(int port)
+{
+ struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+ u32 tmp;
+
+ /* Check preconditions */
+ tmp = in_le32(priv->regbase + SIR_SSTATUS);
+ if ((tmp & SSTATUS_DET_MASK) != 0x03) {
+ printf("Device error on port: %d\n", port);
+ return -1;
+ }
+
+ tmp = in_le32(priv->regbase + PIO_CMD_STATUS);
+ if (tmp & (ATA_BUSY | ATA_DRQ)) {
+ printf("Device not ready on port: %d\n", port);
+ return -1;
+ }
+
+ /* Clear interrupt cause */
+ out_le32(priv->regbase + EDMA_IECR, 0x0);
+
+ tmp = in_le32(SATAHC_BASE + SATAHC_ICR);
+ tmp &= ~(port == 0 ? SATAHC_ICR_PORT0 : SATAHC_ICR_PORT1);
+ out_le32(SATAHC_BASE + SATAHC_ICR, tmp);
+
+ /* Configure edma operation */
+ tmp = in_le32(priv->regbase + EDMA_CFG);
+ tmp &= ~EDMA_CFG_NCQ; /* No NCQ */
+ tmp &= ~EDMA_CFG_EQUE; /* Dont queue operations */
+ out_le32(priv->regbase + EDMA_CFG, tmp);
+
+ out_le32(priv->regbase + SIR_FIS_IRQ_CAUSE, 0x0);
+
+ /* Configure fis, set all to no-wait for now */
+ out_le32(priv->regbase + SIR_FIS_CFG, 0x0);
+
+ /* Setup request queue */
+ out_le32(priv->regbase + EDMA_RQBA_HI, 0x0);
+ out_le32(priv->regbase + EDMA_RQIPR, priv->request);
+ out_le32(priv->regbase + EDMA_RQOPR, 0x0);
+
+ /* Setup response queue */
+ out_le32(priv->regbase + EDMA_RSBA_HI, 0x0);
+ out_le32(priv->regbase + EDMA_RSOPR, priv->response);
+ out_le32(priv->regbase + EDMA_RSIPR, 0x0);
+
+ /* Start edma */
+ out_le32(priv->regbase + EDMA_CMD, EDMA_CMD_ENEDMA);
+
+ return 0;
+}
+
+static int mv_reset_channel(int port)
+{
+ struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+
+ /* Make sure edma is stopped */
+ mv_stop_edma_engine(port);
+
+ out_le32(priv->regbase + EDMA_CMD, EDMA_CMD_ATARST);
+ udelay(25); /* allow reset propagation */
+ out_le32(priv->regbase + EDMA_CMD, 0);
+ mdelay(10);
+
+ return 0;
+}
+
+static void mv_reset_port(int port)
+{
+ struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+
+ mv_reset_channel(port);
+
+ out_le32(priv->regbase + EDMA_CMD, 0x0);
+ out_le32(priv->regbase + EDMA_CFG, 0x101f);
+ out_le32(priv->regbase + EDMA_IECR, 0x0);
+ out_le32(priv->regbase + EDMA_IEMR, 0x0);
+ out_le32(priv->regbase + EDMA_RQBA_HI, 0x0);
+ out_le32(priv->regbase + EDMA_RQIPR, 0x0);
+ out_le32(priv->regbase + EDMA_RQOPR, 0x0);
+ out_le32(priv->regbase + EDMA_RSBA_HI, 0x0);
+ out_le32(priv->regbase + EDMA_RSIPR, 0x0);
+ out_le32(priv->regbase + EDMA_RSOPR, 0x0);
+ out_le32(priv->regbase + EDMA_IORTO, 0xfa);
+}
+
+static void mv_reset_one_hc(void)
+{
+ out_le32(SATAHC_BASE + SATAHC_ICT, 0x00);
+ out_le32(SATAHC_BASE + SATAHC_ITT, 0x00);
+ out_le32(SATAHC_BASE + SATAHC_ICR, 0x00);
+}
+
+static int probe_port(int port)
+{
+ struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+ int tries, tries2, set15 = 0;
+ u32 tmp;
+
+ debug("Probe port: %d\n", port);
+
+ for (tries = 0; tries < 2; tries++) {
+ /* Clear SError */
+ out_le32(priv->regbase + SIR_SERROR, 0x0);
+
+ /* trigger com-init */
+ tmp = in_le32(priv->regbase + SIR_SCONTROL);
+ tmp = (tmp & 0x0f0) | 0x300 | SIR_SCONTROL_DETEN;
+ out_le32(priv->regbase + SIR_SCONTROL, tmp);
+
+ mdelay(1);
+
+ tmp = in_le32(priv->regbase + SIR_SCONTROL);
+ tries2 = 5;
+ do {
+ tmp = (tmp & 0x0f0) | 0x300;
+ out_le32(priv->regbase + SIR_SCONTROL, tmp);
+ mdelay(10);
+ tmp = in_le32(priv->regbase + SIR_SCONTROL);
+ } while ((tmp & 0xf0f) != 0x300 && tries2--);
+
+ mdelay(10);
+
+ for (tries2 = 0; tries2 < 200; tries2++) {
+ tmp = in_le32(priv->regbase + SIR_SSTATUS);
+ if ((tmp & SSTATUS_DET_MASK) == 0x03) {
+ debug("Found device on port\n");
+ return 0;
+ }
+ mdelay(1);
+ }
+
+ if ((tmp & SSTATUS_DET_MASK) == 0) {
+ debug("No device attached on port %d\n", port);
+ return -ENODEV;
+ }
+
+ if (!set15) {
+ /* Try on 1.5Gb/S */
+ debug("Try 1.5Gb link\n");
+ set15 = 1;
+ out_le32(priv->regbase + SIR_SCONTROL, 0x304);
+
+ tmp = in_le32(priv->regbase + SIR_ICFG);
+ tmp &= ~SIR_CFG_GEN2EN;
+ out_le32(priv->regbase + SIR_ICFG, tmp);
+
+ mv_reset_channel(port);
+ }
+ }
+
+ debug("Failed to probe port\n");
+ return -1;
+}
+
+/* Get request queue in pointer */
+static int get_reqip(int port)
+{
+ struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+ u32 tmp;
+
+ tmp = in_le32(priv->regbase + EDMA_RQIPR) & EDMA_RQIPR_IPMASK;
+ tmp = tmp >> EDMA_RQIPR_IPSHIFT;
+
+ return tmp;
+}
+
+static void set_reqip(int port, int reqin)
+{
+ struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+ u32 tmp;
+
+ tmp = in_le32(priv->regbase + EDMA_RQIPR) & ~EDMA_RQIPR_IPMASK;
+ tmp |= ((reqin << EDMA_RQIPR_IPSHIFT) & EDMA_RQIPR_IPMASK);
+ out_le32(priv->regbase + EDMA_RQIPR, tmp);
+}
+
+/* Get next available slot, ignoring possible overwrite */
+static int get_next_reqip(int port)
+{
+ int slot = get_reqip(port);
+ slot = (slot + 1) % REQUEST_QUEUE_SIZE;
+ return slot;
+}
+
+/* Get response queue in pointer */
+static int get_rspip(int port)
+{
+ struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+ u32 tmp;
+
+ tmp = in_le32(priv->regbase + EDMA_RSIPR) & EDMA_RSIPR_IPMASK;
+ tmp = tmp >> EDMA_RSIPR_IPSHIFT;
+
+ return tmp;
+}
+
+/* Get response queue out pointer */
+static int get_rspop(int port)
+{
+ struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+ u32 tmp;
+
+ tmp = in_le32(priv->regbase + EDMA_RSOPR) & EDMA_RSOPR_OPMASK;
+ tmp = tmp >> EDMA_RSOPR_OPSHIFT;
+ return tmp;
+}
+
+/* Get next response queue pointer */
+static int get_next_rspop(int port)
+{
+ return (get_rspop(port) + 1) % RESPONSE_QUEUE_SIZE;
+}
+
+/* Set response queue pointer */
+static void set_rspop(int port, int reqin)
+{
+ struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+ u32 tmp;
+
+ tmp = in_le32(priv->regbase + EDMA_RSOPR) & ~EDMA_RSOPR_OPMASK;
+ tmp |= ((reqin << EDMA_RSOPR_OPSHIFT) & EDMA_RSOPR_OPMASK);
+
+ out_le32(priv->regbase + EDMA_RSOPR, tmp);
+}
+
+static int wait_dma_completion(int port, int index, u32 timeout_msec)
+{
+ u32 tmp, res;
+
+ tmp = port == 0 ? SATAHC_ICR_PORT0 : SATAHC_ICR_PORT1;
+ res = ata_wait_register((u32 *)(SATAHC_BASE + SATAHC_ICR), tmp,
+ tmp, timeout_msec);
+ if (res)
+ printf("Failed to wait for completion on port %d\n", port);
+
+ return res;
+}
+
+static void process_responses(int port)
+{
+#ifdef DEBUG
+ struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+#endif
+ u32 tmp;
+ u32 outind = get_rspop(port);
+
+ /* Ack interrupts */
+ tmp = in_le32(SATAHC_BASE + SATAHC_ICR);
+ if (port == 0)
+ tmp &= ~(BIT(0) | BIT(8));
+ else
+ tmp &= ~(BIT(1) | BIT(9));
+ tmp &= ~(BIT(4));
+ out_le32(SATAHC_BASE + SATAHC_ICR, tmp);
+
+ while (get_rspip(port) != outind) {
+#ifdef DEBUG
+ debug("Response index %d flags %08x on port %d\n", outind,
+ priv->response[outind].flags, port);
+#endif
+ outind = get_next_rspop(port);
+ set_rspop(port, outind);
+ }
+}
+
+static int mv_ata_exec_ata_cmd(int port, struct sata_fis_h2d *cfis,
+ u8 *buffer, u32 len, u32 iswrite)
+{
+ struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+ struct crqb *req;
+ int slot;
+ u32 start;
+
+ if (len >= 64 * 1024) {
+ printf("We only support <64K transfers for now\n");
+ return -1;
+ }
+
+ /* Initialize request */
+ slot = get_reqip(port);
+ memset(&priv->request[slot], 0, sizeof(struct crqb));
+ req = &priv->request[slot];
+
+ req->dtb_low = (u32)buffer;
+
+ /* Dont use PRDs */
+ req->control_flags = CRQB_CNTRLFLAGS_PRDMODE;
+ req->control_flags |= iswrite ? 0 : CRQB_CNTRLFLAGS_DIR;
+ req->control_flags |=
+ ((cfis->pm_port_c << CRQB_CNTRLFLAGS_PMPORTSHIFT)
+ & CRQB_CNTRLFLAGS_PMPORTMASK);
+
+ req->drb_count = len;
+
+ req->ata_cmd_feat = (cfis->command << CRQB_CMDFEAT_CMDSHIFT) &
+ CRQB_CMDFEAT_CMDMASK;
+ req->ata_cmd_feat |= (cfis->features << CRQB_CMDFEAT_FEATSHIFT) &
+ CRQB_CMDFEAT_FEATMASK;
+
+ req->ata_addr = (cfis->lba_low << CRQB_ADDR_LBA_LOWSHIFT) &
+ CRQB_ADDR_LBA_LOWMASK;
+ req->ata_addr |= (cfis->lba_mid << CRQB_ADDR_LBA_MIDSHIFT) &
+ CRQB_ADDR_LBA_MIDMASK;
+ req->ata_addr |= (cfis->lba_high << CRQB_ADDR_LBA_HIGHSHIFT) &
+ CRQB_ADDR_LBA_HIGHMASK;
+ req->ata_addr |= (cfis->device << CRQB_ADDR_DEVICE_SHIFT) &
+ CRQB_ADDR_DEVICE_MASK;
+
+ req->ata_addr_exp = (cfis->lba_low_exp << CRQB_ADDR_LBA_LOW_EXP_SHIFT) &
+ CRQB_ADDR_LBA_LOW_EXP_MASK;
+ req->ata_addr_exp |=
+ (cfis->lba_mid_exp << CRQB_ADDR_LBA_MID_EXP_SHIFT) &
+ CRQB_ADDR_LBA_MID_EXP_MASK;
+ req->ata_addr_exp |=
+ (cfis->lba_high_exp << CRQB_ADDR_LBA_HIGH_EXP_SHIFT) &
+ CRQB_ADDR_LBA_HIGH_EXP_MASK;
+ req->ata_addr_exp |=
+ (cfis->features_exp << CRQB_ADDR_FEATURE_EXP_SHIFT) &
+ CRQB_ADDR_FEATURE_EXP_MASK;
+
+ req->ata_sect_count =
+ (cfis->sector_count << CRQB_SECTCOUNT_COUNT_SHIFT) &
+ CRQB_SECTCOUNT_COUNT_MASK;
+ req->ata_sect_count |=
+ (cfis->sector_count_exp << CRQB_SECTCOUNT_COUNT_EXP_SHIFT) &
+ CRQB_SECTCOUNT_COUNT_EXP_MASK;
+
+ /* Flush data */
+ start = (u32)req & ~(ARCH_DMA_MINALIGN - 1);
+ flush_dcache_range(start,
+ start + ALIGN(sizeof(*req), ARCH_DMA_MINALIGN));
+
+ /* Trigger operation */
+ slot = get_next_reqip(port);
+ set_reqip(port, slot);
+
+ /* Wait for completion */
+ if (wait_dma_completion(port, slot, 10000)) {
+ printf("ATA operation timed out\n");
+ return -1;
+ }
+
+ process_responses(port);
+
+ /* Invalidate data on read */
+ if (buffer && len) {
+ start = (u32)buffer & ~(ARCH_DMA_MINALIGN - 1);
+ invalidate_dcache_range(start,
+ start + ALIGN(len, ARCH_DMA_MINALIGN));
+ }
+
+ return len;
+}
+
+static u32 mv_sata_rw_cmd_ext(int port, lbaint_t start, u32 blkcnt,
+ u8 *buffer, int is_write)
+{
+ struct sata_fis_h2d cfis;
+ u32 res;
+ u64 block;
+
+ block = (u64)start;
+
+ memset(&cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis.command = (is_write) ? ATA_CMD_WRITE_EXT : ATA_CMD_READ_EXT;
+
+ cfis.lba_high_exp = (block >> 40) & 0xff;
+ cfis.lba_mid_exp = (block >> 32) & 0xff;
+ cfis.lba_low_exp = (block >> 24) & 0xff;
+ cfis.lba_high = (block >> 16) & 0xff;
+ cfis.lba_mid = (block >> 8) & 0xff;
+ cfis.lba_low = block & 0xff;
+ cfis.device = ATA_LBA;
+ cfis.sector_count_exp = (blkcnt >> 8) & 0xff;
+ cfis.sector_count = blkcnt & 0xff;
+
+ res = mv_ata_exec_ata_cmd(port, &cfis, buffer, ATA_SECT_SIZE * blkcnt,
+ is_write);
+
+ return res >= 0 ? blkcnt : res;
+}
+
+static u32 mv_sata_rw_cmd(int port, lbaint_t start, u32 blkcnt, u8 *buffer,
+ int is_write)
+{
+ struct sata_fis_h2d cfis;
+ lbaint_t block;
+ u32 res;
+
+ block = start;
+
+ memset(&cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis.command = (is_write) ? ATA_CMD_WRITE : ATA_CMD_READ;
+ cfis.device = ATA_LBA;
+
+ cfis.device |= (block >> 24) & 0xf;
+ cfis.lba_high = (block >> 16) & 0xff;
+ cfis.lba_mid = (block >> 8) & 0xff;
+ cfis.lba_low = block & 0xff;
+ cfis.sector_count = (u8)(blkcnt & 0xff);
+
+ res = mv_ata_exec_ata_cmd(port, &cfis, buffer, ATA_SECT_SIZE * blkcnt,
+ is_write);
+
+ return res >= 0 ? blkcnt : res;
+}
+
+static u32 ata_low_level_rw(int dev, lbaint_t blknr, lbaint_t blkcnt,
+ void *buffer, int is_write)
+{
+ lbaint_t start, blks;
+ u8 *addr;
+ int max_blks;
+
+ debug("%s: %ld %ld\n", __func__, blknr, blkcnt);
+
+ start = blknr;
+ blks = blkcnt;
+ addr = (u8 *)buffer;
+
+ max_blks = MV_ATA_MAX_SECTORS;
+ do {
+ if (blks > max_blks) {
+ if (sata_dev_desc[dev].lba48) {
+ mv_sata_rw_cmd_ext(dev, start, max_blks, addr,
+ is_write);
+ } else {
+ mv_sata_rw_cmd(dev, start, max_blks, addr,
+ is_write);
+ }
+ start += max_blks;
+ blks -= max_blks;
+ addr += ATA_SECT_SIZE * max_blks;
+ } else {
+ if (sata_dev_desc[dev].lba48) {
+ mv_sata_rw_cmd_ext(dev, start, blks, addr,
+ is_write);
+ } else {
+ mv_sata_rw_cmd(dev, start, blks, addr,
+ is_write);
+ }
+ start += blks;
+ blks = 0;
+ addr += ATA_SECT_SIZE * blks;
+ }
+ } while (blks != 0);
+
+ return blkcnt;
+}
+
+static int mv_ata_exec_ata_cmd_nondma(int port,
+ struct sata_fis_h2d *cfis, u8 *buffer,
+ u32 len, u32 iswrite)
+{
+ struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+ int i;
+ u16 *tp;
+
+ debug("%s\n", __func__);
+
+ out_le32(priv->regbase + PIO_SECTOR_COUNT, cfis->sector_count);
+ out_le32(priv->regbase + PIO_LBA_HI, cfis->lba_high);
+ out_le32(priv->regbase + PIO_LBA_MID, cfis->lba_mid);
+ out_le32(priv->regbase + PIO_LBA_LOW, cfis->lba_low);
+ out_le32(priv->regbase + PIO_ERR_FEATURES, cfis->features);
+ out_le32(priv->regbase + PIO_DEVICE, cfis->device);
+ out_le32(priv->regbase + PIO_CMD_STATUS, cfis->command);
+
+ if (ata_wait_register((u32 *)(priv->regbase + PIO_CMD_STATUS),
+ ATA_BUSY, 0x0, 10000)) {
+ debug("Failed to wait for completion\n");
+ return -1;
+ }
+
+ if (len > 0) {
+ tp = (u16 *)buffer;
+ for (i = 0; i < len / 2; i++) {
+ if (iswrite)
+ out_le16(priv->regbase + PIO_DATA, *tp++);
+ else
+ *tp++ = in_le16(priv->regbase + PIO_DATA);
+ }
+ }
+
+ return len;
+}
+
+static int mv_sata_identify(int port, u16 *id)
+{
+ struct sata_fis_h2d h2d;
+
+ memset(&h2d, 0, sizeof(struct sata_fis_h2d));
+
+ h2d.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ h2d.command = ATA_CMD_ID_ATA;
+
+ /* Give device time to get operational */
+ mdelay(10);
+
+ return mv_ata_exec_ata_cmd_nondma(port, &h2d, (u8 *)id,
+ ATA_ID_WORDS * 2, READ_CMD);
+}
+
+static void mv_sata_xfer_mode(int port, u16 *id)
+{
+ struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+
+ priv->pio = id[ATA_ID_PIO_MODES];
+ priv->mwdma = id[ATA_ID_MWDMA_MODES];
+ priv->udma = id[ATA_ID_UDMA_MODES];
+ debug("pio %04x, mwdma %04x, udma %04x\n", priv->pio, priv->mwdma,
+ priv->udma);
+}
+
+static void mv_sata_set_features(int port)
+{
+ struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+ struct sata_fis_h2d cfis;
+ u8 udma_cap;
+
+ memset(&cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis.command = ATA_CMD_SET_FEATURES;
+ cfis.features = SETFEATURES_XFER;
+
+ /* First check the device capablity */
+ udma_cap = (u8) (priv->udma & 0xff);
+
+ if (udma_cap == ATA_UDMA6)
+ cfis.sector_count = XFER_UDMA_6;
+ if (udma_cap == ATA_UDMA5)
+ cfis.sector_count = XFER_UDMA_5;
+ if (udma_cap == ATA_UDMA4)
+ cfis.sector_count = XFER_UDMA_4;
+ if (udma_cap == ATA_UDMA3)
+ cfis.sector_count = XFER_UDMA_3;
+
+ mv_ata_exec_ata_cmd_nondma(port, &cfis, NULL, 0, READ_CMD);
+}
+
+int mv_sata_spin_down(int dev)
+{
+ struct sata_fis_h2d cfis;
+ struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[dev].priv;
+
+ if (priv->link == 0) {
+ debug("No device on port: %d\n", dev);
+ return 1;
+ }
+
+ memset(&cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis.command = ATA_CMD_STANDBY;
+
+ return mv_ata_exec_ata_cmd_nondma(dev, &cfis, NULL, 0, READ_CMD);
+}
+
+int mv_sata_spin_up(int dev)
+{
+ struct sata_fis_h2d cfis;
+ struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[dev].priv;
+
+ if (priv->link == 0) {
+ debug("No device on port: %d\n", dev);
+ return 1;
+ }
+
+ memset(&cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis.command = ATA_CMD_IDLE;
+
+ return mv_ata_exec_ata_cmd_nondma(dev, &cfis, NULL, 0, READ_CMD);
+}
+
+ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer)
+{
+ return ata_low_level_rw(dev, blknr, blkcnt, buffer, READ_CMD);
+}
+
+ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer)
+{
+ return ata_low_level_rw(dev, blknr, blkcnt, (void *)buffer, WRITE_CMD);
+}
+
+/*
+ * Initialize SATA memory windows
+ */
+static void mvsata_ide_conf_mbus_windows(void)
+{
+ const struct mbus_dram_target_info *dram;
+ int i;
+
+ dram = mvebu_mbus_dram_info();
+
+ /* Disable windows, Set Size/Base to 0 */
+ for (i = 0; i < 4; i++) {
+ writel(0, MVSATA_WIN_CONTROL(i));
+ writel(0, MVSATA_WIN_BASE(i));
+ }
+
+ for (i = 0; i < dram->num_cs; i++) {
+ const struct mbus_dram_window *cs = dram->cs + i;
+ writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) |
+ (dram->mbus_dram_target_id << 4) | 1,
+ MVSATA_WIN_CONTROL(i));
+ writel(cs->base & 0xffff0000, MVSATA_WIN_BASE(i));
+ }
+}
+
+int init_sata(int dev)
+{
+ struct mv_priv *priv;
+
+ debug("Initialize sata dev: %d\n", dev);
+
+ if (dev < 0 || dev >= CONFIG_SYS_SATA_MAX_DEVICE) {
+ printf("Invalid sata device %d\n", dev);
+ return -1;
+ }
+
+ priv = (struct mv_priv *)malloc(sizeof(struct mv_priv));
+ if (!priv) {
+ printf("Failed to allocate memory for private sata data\n");
+ return -ENOMEM;
+ }
+
+ memset((void *)priv, 0, sizeof(struct mv_priv));
+
+ /* Allocate and align request buffer */
+ priv->crqb_alloc = malloc(sizeof(struct crqb) * REQUEST_QUEUE_SIZE +
+ CRQB_ALIGN);
+ if (!priv->crqb_alloc) {
+ printf("Unable to allocate memory for request queue\n");
+ return -ENOMEM;
+ }
+ memset(priv->crqb_alloc, 0,
+ sizeof(struct crqb) * REQUEST_QUEUE_SIZE + CRQB_ALIGN);
+ priv->request = (struct crqb *)(((u32) priv->crqb_alloc + CRQB_ALIGN) &
+ ~(CRQB_ALIGN - 1));
+
+ /* Allocate and align response buffer */
+ priv->crpb_alloc = malloc(sizeof(struct crpb) * REQUEST_QUEUE_SIZE +
+ CRPB_ALIGN);
+ if (!priv->crpb_alloc) {
+ printf("Unable to allocate memory for response queue\n");
+ return -ENOMEM;
+ }
+ memset(priv->crpb_alloc, 0,
+ sizeof(struct crpb) * REQUEST_QUEUE_SIZE + CRPB_ALIGN);
+ priv->response = (struct crpb *)(((u32) priv->crpb_alloc + CRPB_ALIGN) &
+ ~(CRPB_ALIGN - 1));
+
+ sata_dev_desc[dev].priv = (void *)priv;
+
+ sprintf(priv->name, "SATA%d", dev);
+
+ priv->regbase = dev == 0 ? SATA0_BASE : SATA1_BASE;
+
+ if (!hw_init) {
+ debug("Initialize sata hw\n");
+ hw_init = 1;
+ mv_reset_one_hc();
+ mvsata_ide_conf_mbus_windows();
+ }
+
+ mv_reset_port(dev);
+
+ if (probe_port(dev)) {
+ priv->link = 0;
+ return -ENODEV;
+ }
+ priv->link = 1;
+
+ return 0;
+}
+
+int reset_sata(int dev)
+{
+ return 0;
+}
+
+int scan_sata(int port)
+{
+ unsigned char serial[ATA_ID_SERNO_LEN + 1];
+ unsigned char firmware[ATA_ID_FW_REV_LEN + 1];
+ unsigned char product[ATA_ID_PROD_LEN + 1];
+ u64 n_sectors;
+ u16 *id;
+ struct mv_priv *priv = (struct mv_priv *)sata_dev_desc[port].priv;
+
+ if (!priv->link)
+ return -ENODEV;
+
+ id = (u16 *)malloc(ATA_ID_WORDS * 2);
+ if (!id) {
+ printf("Failed to malloc id data\n");
+ return -ENOMEM;
+ }
+
+ mv_sata_identify(port, id);
+ ata_swap_buf_le16(id, ATA_ID_WORDS);
+#ifdef DEBUG
+ ata_dump_id(id);
+#endif
+
+ /* Serial number */
+ ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial));
+ memcpy(sata_dev_desc[port].product, serial, sizeof(serial));
+
+ /* Firmware version */
+ ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware));
+ memcpy(sata_dev_desc[port].revision, firmware, sizeof(firmware));
+
+ /* Product model */
+ ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product));
+ memcpy(sata_dev_desc[port].vendor, product, sizeof(product));
+
+ /* Total sectors */
+ n_sectors = ata_id_n_sectors(id);
+ sata_dev_desc[port].lba = n_sectors;
+
+ /* Check if support LBA48 */
+ if (ata_id_has_lba48(id)) {
+ sata_dev_desc[port].lba48 = 1;
+ debug("Device support LBA48\n");
+ }
+
+ /* Get the NCQ queue depth from device */
+ priv->queue_depth = ata_id_queue_depth(id);
+
+ /* Get the xfer mode from device */
+ mv_sata_xfer_mode(port, id);
+
+ /* Set the xfer mode to highest speed */
+ mv_sata_set_features(port);
+
+ /* Start up */
+ mv_start_edma_engine(port);
+
+ return 0;
+}
diff --git a/drivers/ata/sata_sandbox.c b/drivers/ata/sata_sandbox.c
new file mode 100644
index 0000000000..bd967d290c
--- /dev/null
+++ b/drivers/ata/sata_sandbox.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2015 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+int init_sata(int dev)
+{
+ return 0;
+}
+
+int reset_sata(int dev)
+{
+ return 0;
+}
+
+int scan_sata(int dev)
+{
+ return 0;
+}
+
+ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer)
+{
+ return 0;
+}
+
+ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer)
+{
+ return 0;
+}
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
new file mode 100644
index 0000000000..daff7d4ab5
--- /dev/null
+++ b/drivers/ata/sata_sil.c
@@ -0,0 +1,715 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ * Author: Tang Yuantian <b29983@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <command.h>
+#include <asm/byteorder.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <fis.h>
+#include <sata.h>
+#include <libata.h>
+#include <sata.h>
+#include "sata_sil.h"
+
+/* Convert sectorsize to wordsize */
+#define ATA_SECTOR_WORDS (ATA_SECT_SIZE/2)
+#define virt_to_bus(devno, v) pci_virt_to_mem(devno, (void *) (v))
+
+static struct sata_info sata_info;
+
+static struct pci_device_id supported[] = {
+ {PCI_VENDOR_ID_SILICONIMAGE, PCI_DEVICE_ID_SIL3131},
+ {PCI_VENDOR_ID_SILICONIMAGE, PCI_DEVICE_ID_SIL3132},
+ {PCI_VENDOR_ID_SILICONIMAGE, PCI_DEVICE_ID_SIL3124},
+ {}
+};
+
+static void sil_sata_dump_fis(struct sata_fis_d2h *s)
+{
+ printf("Status FIS dump:\n");
+ printf("fis_type: %02x\n", s->fis_type);
+ printf("pm_port_i: %02x\n", s->pm_port_i);
+ printf("status: %02x\n", s->status);
+ printf("error: %02x\n", s->error);
+ printf("lba_low: %02x\n", s->lba_low);
+ printf("lba_mid: %02x\n", s->lba_mid);
+ printf("lba_high: %02x\n", s->lba_high);
+ printf("device: %02x\n", s->device);
+ printf("lba_low_exp: %02x\n", s->lba_low_exp);
+ printf("lba_mid_exp: %02x\n", s->lba_mid_exp);
+ printf("lba_high_exp: %02x\n", s->lba_high_exp);
+ printf("res1: %02x\n", s->res1);
+ printf("sector_count: %02x\n", s->sector_count);
+ printf("sector_count_exp: %02x\n", s->sector_count_exp);
+}
+
+static const char *sata_spd_string(unsigned int speed)
+{
+ static const char * const spd_str[] = {
+ "1.5 Gbps",
+ "3.0 Gbps",
+ "6.0 Gbps",
+ };
+
+ if ((speed - 1) > 2)
+ return "<unknown>";
+
+ return spd_str[speed - 1];
+}
+
+static u32 ata_wait_register(void *reg, u32 mask,
+ u32 val, int timeout_msec)
+{
+ u32 tmp;
+
+ tmp = readl(reg);
+ while ((tmp & mask) == val && timeout_msec > 0) {
+ mdelay(1);
+ timeout_msec--;
+ tmp = readl(reg);
+ }
+
+ return tmp;
+}
+
+static void sil_config_port(void *port)
+{
+ /* configure IRQ WoC */
+ writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
+
+ /* zero error counters. */
+ writew(0x8000, port + PORT_DECODE_ERR_THRESH);
+ writew(0x8000, port + PORT_CRC_ERR_THRESH);
+ writew(0x8000, port + PORT_HSHK_ERR_THRESH);
+ writew(0x0000, port + PORT_DECODE_ERR_CNT);
+ writew(0x0000, port + PORT_CRC_ERR_CNT);
+ writew(0x0000, port + PORT_HSHK_ERR_CNT);
+
+ /* always use 64bit activation */
+ writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
+
+ /* clear port multiplier enable and resume bits */
+ writel(PORT_CS_PMP_EN | PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR);
+}
+
+static int sil_init_port(void *port)
+{
+ u32 tmp;
+
+ writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
+ ata_wait_register(port + PORT_CTRL_STAT,
+ PORT_CS_INIT, PORT_CS_INIT, 100);
+ tmp = ata_wait_register(port + PORT_CTRL_STAT,
+ PORT_CS_RDY, 0, 100);
+
+ if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY)
+ return 1;
+
+ return 0;
+}
+
+static void sil_read_fis(int dev, int tag, struct sata_fis_d2h *fis)
+{
+ struct sil_sata *sata = sata_dev_desc[dev].priv;
+ void *port = sata->port;
+ struct sil_prb *prb;
+ int i;
+ u32 *src, *dst;
+
+ prb = port + PORT_LRAM + tag * PORT_LRAM_SLOT_SZ;
+ src = (u32 *)&prb->fis;
+ dst = (u32 *)fis;
+ for (i = 0; i < sizeof(struct sata_fis_h2d); i += 4)
+ *dst++ = readl(src++);
+}
+
+static int sil_exec_cmd(int dev, struct sil_cmd_block *pcmd, int tag)
+{
+ struct sil_sata *sata = sata_dev_desc[dev].priv;
+ void *port = sata->port;
+ u64 paddr = virt_to_bus(sata->devno, pcmd);
+ u32 irq_mask, irq_stat;
+ int rc;
+
+ writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR);
+
+ /* better to add momery barrior here */
+ writel((u32)paddr, port + PORT_CMD_ACTIVATE + tag * 8);
+ writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + tag * 8 + 4);
+
+ irq_mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT;
+ irq_stat = ata_wait_register(port + PORT_IRQ_STAT, irq_mask,
+ 0, 10000);
+
+ /* clear IRQs */
+ writel(irq_mask, port + PORT_IRQ_STAT);
+ irq_stat >>= PORT_IRQ_RAW_SHIFT;
+
+ if (irq_stat & PORT_IRQ_COMPLETE)
+ rc = 0;
+ else {
+ /* force port into known state */
+ sil_init_port(port);
+ if (irq_stat & PORT_IRQ_ERROR)
+ rc = 1; /* error */
+ else
+ rc = 2; /* busy */
+ }
+
+ return rc;
+}
+
+static int sil_cmd_set_feature(int dev)
+{
+ struct sil_sata *sata = sata_dev_desc[dev].priv;
+ struct sil_cmd_block cmdb, *pcmd = &cmdb;
+ struct sata_fis_d2h fis;
+ u8 udma_cap;
+ int ret;
+
+ memset((void *)&cmdb, 0, sizeof(struct sil_cmd_block));
+ pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ pcmd->prb.fis.pm_port_c = (1 << 7);
+ pcmd->prb.fis.command = ATA_CMD_SET_FEATURES;
+ pcmd->prb.fis.features = SETFEATURES_XFER;
+
+ /* First check the device capablity */
+ udma_cap = (u8)(sata->udma & 0xff);
+ debug("udma_cap %02x\n", udma_cap);
+
+ if (udma_cap == ATA_UDMA6)
+ pcmd->prb.fis.sector_count = XFER_UDMA_6;
+ if (udma_cap == ATA_UDMA5)
+ pcmd->prb.fis.sector_count = XFER_UDMA_5;
+ if (udma_cap == ATA_UDMA4)
+ pcmd->prb.fis.sector_count = XFER_UDMA_4;
+ if (udma_cap == ATA_UDMA3)
+ pcmd->prb.fis.sector_count = XFER_UDMA_3;
+
+ ret = sil_exec_cmd(dev, pcmd, 0);
+ if (ret) {
+ sil_read_fis(dev, 0, &fis);
+ printf("Err: exe cmd(0x%x).\n",
+ readl(sata->port + PORT_SERROR));
+ sil_sata_dump_fis(&fis);
+ return 1;
+ }
+
+ return 0;
+}
+
+static int sil_cmd_identify_device(int dev, u16 *id)
+{
+ struct sil_sata *sata = sata_dev_desc[dev].priv;
+ struct sil_cmd_block cmdb, *pcmd = &cmdb;
+ struct sata_fis_d2h fis;
+ int ret;
+
+ memset((void *)&cmdb, 0, sizeof(struct sil_cmd_block));
+ pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_PROTOCOL);
+ pcmd->prb.prot = cpu_to_le16(PRB_PROT_READ);
+ pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ pcmd->prb.fis.pm_port_c = (1 << 7);
+ pcmd->prb.fis.command = ATA_CMD_ID_ATA;
+ pcmd->sge.addr = cpu_to_le64(virt_to_bus(sata->devno, id));
+ pcmd->sge.cnt = cpu_to_le32(sizeof(id[0]) * ATA_ID_WORDS);
+ pcmd->sge.flags = cpu_to_le32(SGE_TRM);
+
+ ret = sil_exec_cmd(dev, pcmd, 0);
+ if (ret) {
+ sil_read_fis(dev, 0, &fis);
+ printf("Err: id cmd(0x%x).\n", readl(sata->port + PORT_SERROR));
+ sil_sata_dump_fis(&fis);
+ return 1;
+ }
+ ata_swap_buf_le16(id, ATA_ID_WORDS);
+
+ return 0;
+}
+
+static int sil_cmd_soft_reset(int dev)
+{
+ struct sil_cmd_block cmdb, *pcmd = &cmdb;
+ struct sil_sata *sata = sata_dev_desc[dev].priv;
+ struct sata_fis_d2h fis;
+ void *port = sata->port;
+ int ret;
+
+ /* put the port into known state */
+ if (sil_init_port(port)) {
+ printf("SRST: port %d not ready\n", dev);
+ return 1;
+ }
+
+ memset((void *)&cmdb, 0, sizeof(struct sil_cmd_block));
+
+ pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_SRST);
+ pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ pcmd->prb.fis.pm_port_c = 0xf;
+
+ ret = sil_exec_cmd(dev, &cmdb, 0);
+ if (ret) {
+ sil_read_fis(dev, 0, &fis);
+ printf("SRST cmd error.\n");
+ sil_sata_dump_fis(&fis);
+ return 1;
+ }
+
+ return 0;
+}
+
+static ulong sil_sata_rw_cmd(int dev, ulong start, ulong blkcnt,
+ u8 *buffer, int is_write)
+{
+ struct sil_sata *sata = sata_dev_desc[dev].priv;
+ struct sil_cmd_block cmdb, *pcmd = &cmdb;
+ struct sata_fis_d2h fis;
+ u64 block;
+ int ret;
+
+ block = (u64)start;
+ memset(pcmd, 0, sizeof(struct sil_cmd_block));
+ pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_PROTOCOL);
+ pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ pcmd->prb.fis.pm_port_c = (1 << 7);
+ if (is_write) {
+ pcmd->prb.fis.command = ATA_CMD_WRITE;
+ pcmd->prb.prot = cpu_to_le16(PRB_PROT_WRITE);
+ } else {
+ pcmd->prb.fis.command = ATA_CMD_READ;
+ pcmd->prb.prot = cpu_to_le16(PRB_PROT_READ);
+ }
+
+ pcmd->prb.fis.device = ATA_LBA;
+ pcmd->prb.fis.device |= (block >> 24) & 0xf;
+ pcmd->prb.fis.lba_high = (block >> 16) & 0xff;
+ pcmd->prb.fis.lba_mid = (block >> 8) & 0xff;
+ pcmd->prb.fis.lba_low = block & 0xff;
+ pcmd->prb.fis.sector_count = (u8)blkcnt & 0xff;
+
+ pcmd->sge.addr = cpu_to_le64(virt_to_bus(sata->devno, buffer));
+ pcmd->sge.cnt = cpu_to_le32(blkcnt * ATA_SECT_SIZE);
+ pcmd->sge.flags = cpu_to_le32(SGE_TRM);
+
+ ret = sil_exec_cmd(dev, pcmd, 0);
+ if (ret) {
+ sil_read_fis(dev, 0, &fis);
+ printf("Err: rw cmd(0x%08x).\n",
+ readl(sata->port + PORT_SERROR));
+ sil_sata_dump_fis(&fis);
+ return 1;
+ }
+
+ return blkcnt;
+}
+
+static ulong sil_sata_rw_cmd_ext(int dev, ulong start, ulong blkcnt,
+ u8 *buffer, int is_write)
+{
+ struct sil_sata *sata = sata_dev_desc[dev].priv;
+ struct sil_cmd_block cmdb, *pcmd = &cmdb;
+ struct sata_fis_d2h fis;
+ u64 block;
+ int ret;
+
+ block = (u64)start;
+ memset(pcmd, 0, sizeof(struct sil_cmd_block));
+ pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_PROTOCOL);
+ pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ pcmd->prb.fis.pm_port_c = (1 << 7);
+ if (is_write) {
+ pcmd->prb.fis.command = ATA_CMD_WRITE_EXT;
+ pcmd->prb.prot = cpu_to_le16(PRB_PROT_WRITE);
+ } else {
+ pcmd->prb.fis.command = ATA_CMD_READ_EXT;
+ pcmd->prb.prot = cpu_to_le16(PRB_PROT_READ);
+ }
+
+ pcmd->prb.fis.lba_high_exp = (block >> 40) & 0xff;
+ pcmd->prb.fis.lba_mid_exp = (block >> 32) & 0xff;
+ pcmd->prb.fis.lba_low_exp = (block >> 24) & 0xff;
+ pcmd->prb.fis.lba_high = (block >> 16) & 0xff;
+ pcmd->prb.fis.lba_mid = (block >> 8) & 0xff;
+ pcmd->prb.fis.lba_low = block & 0xff;
+ pcmd->prb.fis.device = ATA_LBA;
+ pcmd->prb.fis.sector_count_exp = (blkcnt >> 8) & 0xff;
+ pcmd->prb.fis.sector_count = blkcnt & 0xff;
+
+ pcmd->sge.addr = cpu_to_le64(virt_to_bus(sata->devno, buffer));
+ pcmd->sge.cnt = cpu_to_le32(blkcnt * ATA_SECT_SIZE);
+ pcmd->sge.flags = cpu_to_le32(SGE_TRM);
+
+ ret = sil_exec_cmd(dev, pcmd, 0);
+ if (ret) {
+ sil_read_fis(dev, 0, &fis);
+ printf("Err: rw ext cmd(0x%08x).\n",
+ readl(sata->port + PORT_SERROR));
+ sil_sata_dump_fis(&fis);
+ return 1;
+ }
+
+ return blkcnt;
+}
+
+static ulong sil_sata_rw_lba28(int dev, ulong blknr, lbaint_t blkcnt,
+ const void *buffer, int is_write)
+{
+ ulong start, blks, max_blks;
+ u8 *addr;
+
+ start = blknr;
+ blks = blkcnt;
+ addr = (u8 *)buffer;
+
+ max_blks = ATA_MAX_SECTORS;
+ do {
+ if (blks > max_blks) {
+ sil_sata_rw_cmd(dev, start, max_blks, addr, is_write);
+ start += max_blks;
+ blks -= max_blks;
+ addr += ATA_SECT_SIZE * max_blks;
+ } else {
+ sil_sata_rw_cmd(dev, start, blks, addr, is_write);
+ start += blks;
+ blks = 0;
+ addr += ATA_SECT_SIZE * blks;
+ }
+ } while (blks != 0);
+
+ return blkcnt;
+}
+
+static ulong sil_sata_rw_lba48(int dev, ulong blknr, lbaint_t blkcnt,
+ const void *buffer, int is_write)
+{
+ ulong start, blks, max_blks;
+ u8 *addr;
+
+ start = blknr;
+ blks = blkcnt;
+ addr = (u8 *)buffer;
+
+ max_blks = ATA_MAX_SECTORS_LBA48;
+ do {
+ if (blks > max_blks) {
+ sil_sata_rw_cmd_ext(dev, start, max_blks,
+ addr, is_write);
+ start += max_blks;
+ blks -= max_blks;
+ addr += ATA_SECT_SIZE * max_blks;
+ } else {
+ sil_sata_rw_cmd_ext(dev, start, blks,
+ addr, is_write);
+ start += blks;
+ blks = 0;
+ addr += ATA_SECT_SIZE * blks;
+ }
+ } while (blks != 0);
+
+ return blkcnt;
+}
+
+static void sil_sata_cmd_flush_cache(int dev)
+{
+ struct sil_cmd_block cmdb, *pcmd = &cmdb;
+
+ memset((void *)pcmd, 0, sizeof(struct sil_cmd_block));
+ pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ pcmd->prb.fis.pm_port_c = (1 << 7);
+ pcmd->prb.fis.command = ATA_CMD_FLUSH;
+
+ sil_exec_cmd(dev, pcmd, 0);
+}
+
+static void sil_sata_cmd_flush_cache_ext(int dev)
+{
+ struct sil_cmd_block cmdb, *pcmd = &cmdb;
+
+ memset((void *)pcmd, 0, sizeof(struct sil_cmd_block));
+ pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ pcmd->prb.fis.pm_port_c = (1 << 7);
+ pcmd->prb.fis.command = ATA_CMD_FLUSH_EXT;
+
+ sil_exec_cmd(dev, pcmd, 0);
+}
+
+static void sil_sata_init_wcache(int dev, u16 *id)
+{
+ struct sil_sata *sata = sata_dev_desc[dev].priv;
+
+ if (ata_id_has_wcache(id) && ata_id_wcache_enabled(id))
+ sata->wcache = 1;
+ if (ata_id_has_flush(id))
+ sata->flush = 1;
+ if (ata_id_has_flush_ext(id))
+ sata->flush_ext = 1;
+}
+
+static int sil_sata_get_wcache(int dev)
+{
+ struct sil_sata *sata = sata_dev_desc[dev].priv;
+
+ return sata->wcache;
+}
+
+static int sil_sata_get_flush(int dev)
+{
+ struct sil_sata *sata = sata_dev_desc[dev].priv;
+
+ return sata->flush;
+}
+
+static int sil_sata_get_flush_ext(int dev)
+{
+ struct sil_sata *sata = sata_dev_desc[dev].priv;
+
+ return sata->flush_ext;
+}
+
+/*
+ * SATA interface between low level driver and command layer
+ */
+ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer)
+{
+ struct sil_sata *sata = sata_dev_desc[dev].priv;
+ ulong rc;
+
+ if (sata->lba48)
+ rc = sil_sata_rw_lba48(dev, blknr, blkcnt, buffer, READ_CMD);
+ else
+ rc = sil_sata_rw_lba28(dev, blknr, blkcnt, buffer, READ_CMD);
+
+ return rc;
+}
+
+/*
+ * SATA interface between low level driver and command layer
+ */
+ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer)
+{
+ struct sil_sata *sata = sata_dev_desc[dev].priv;
+ ulong rc;
+
+ if (sata->lba48) {
+ rc = sil_sata_rw_lba48(dev, blknr, blkcnt, buffer, WRITE_CMD);
+ if (sil_sata_get_wcache(dev) && sil_sata_get_flush_ext(dev))
+ sil_sata_cmd_flush_cache_ext(dev);
+ } else {
+ rc = sil_sata_rw_lba28(dev, blknr, blkcnt, buffer, WRITE_CMD);
+ if (sil_sata_get_wcache(dev) && sil_sata_get_flush(dev))
+ sil_sata_cmd_flush_cache(dev);
+ }
+
+ return rc;
+}
+
+/*
+ * SATA interface between low level driver and command layer
+ */
+int init_sata(int dev)
+{
+ static int init_done, idx;
+ pci_dev_t devno;
+ u16 word;
+
+ if (init_done == 1 && dev < sata_info.maxport)
+ return 0;
+
+ init_done = 1;
+
+ /* Find PCI device(s) */
+ devno = pci_find_devices(supported, idx++);
+ if (devno == -1)
+ return 1;
+
+ pci_read_config_word(devno, PCI_DEVICE_ID, &word);
+
+ /* get the port count */
+ word &= 0xf;
+
+ sata_info.portbase = sata_info.maxport;
+ sata_info.maxport = sata_info.portbase + word;
+ sata_info.devno = devno;
+
+ /* Read out all BARs */
+ sata_info.iobase[0] = (ulong)pci_map_bar(devno,
+ PCI_BASE_ADDRESS_0, PCI_REGION_MEM);
+ sata_info.iobase[1] = (ulong)pci_map_bar(devno,
+ PCI_BASE_ADDRESS_2, PCI_REGION_MEM);
+ sata_info.iobase[2] = (ulong)pci_map_bar(devno,
+ PCI_BASE_ADDRESS_4, PCI_REGION_MEM);
+
+ /* mask out the unused bits */
+ sata_info.iobase[0] &= 0xffffff80;
+ sata_info.iobase[1] &= 0xfffffc00;
+ sata_info.iobase[2] &= 0xffffff80;
+
+ /* Enable Bus Mastering and memory region */
+ pci_write_config_word(devno, PCI_COMMAND,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+ /* Check if mem accesses and Bus Mastering are enabled. */
+ pci_read_config_word(devno, PCI_COMMAND, &word);
+ if (!(word & PCI_COMMAND_MEMORY) ||
+ (!(word & PCI_COMMAND_MASTER))) {
+ printf("Error: Can not enable MEM access or Bus Mastering.\n");
+ debug("PCI command: %04x\n", word);
+ return 1;
+ }
+
+ /* GPIO off */
+ writel(0, (void *)(sata_info.iobase[0] + HOST_FLASH_CMD));
+ /* clear global reset & mask interrupts during initialization */
+ writel(0, (void *)(sata_info.iobase[0] + HOST_CTRL));
+
+ return 0;
+}
+
+int reset_sata(int dev)
+{
+ return 0;
+}
+
+/*
+ * SATA interface between low level driver and command layer
+ */
+int scan_sata(int dev)
+{
+ unsigned char serial[ATA_ID_SERNO_LEN + 1];
+ unsigned char firmware[ATA_ID_FW_REV_LEN + 1];
+ unsigned char product[ATA_ID_PROD_LEN + 1];
+ struct sil_sata *sata;
+ void *port;
+ int cnt;
+ u16 *id;
+ u32 tmp;
+
+ if (dev >= sata_info.maxport) {
+ printf("SATA#%d is not present\n", dev);
+ return 1;
+ }
+
+ printf("SATA#%d\n", dev);
+ port = (void *)sata_info.iobase[1] +
+ PORT_REGS_SIZE * (dev - sata_info.portbase);
+
+ /* Initial PHY setting */
+ writel(0x20c, port + PORT_PHY_CFG);
+
+ /* clear port RST */
+ tmp = readl(port + PORT_CTRL_STAT);
+ if (tmp & PORT_CS_PORT_RST) {
+ writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
+ tmp = ata_wait_register(port + PORT_CTRL_STAT,
+ PORT_CS_PORT_RST, PORT_CS_PORT_RST, 100);
+ if (tmp & PORT_CS_PORT_RST)
+ printf("Err: Failed to clear port RST\n");
+ }
+
+ /* Check if device is present */
+ for (cnt = 0; cnt < 100; cnt++) {
+ tmp = readl(port + PORT_SSTATUS);
+ if ((tmp & 0xF) == 0x3)
+ break;
+ mdelay(1);
+ }
+
+ tmp = readl(port + PORT_SSTATUS);
+ if ((tmp & 0xf) != 0x3) {
+ printf(" (No RDY)\n");
+ return 1;
+ }
+
+ /* Wait for port ready */
+ tmp = ata_wait_register(port + PORT_CTRL_STAT,
+ PORT_CS_RDY, PORT_CS_RDY, 100);
+ if ((tmp & PORT_CS_RDY) != PORT_CS_RDY) {
+ printf("%d port not ready.\n", dev);
+ return 1;
+ }
+
+ /* configure port */
+ sil_config_port(port);
+
+ /* Reset port */
+ writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
+ readl(port + PORT_CTRL_STAT);
+ tmp = ata_wait_register(port + PORT_CTRL_STAT, PORT_CS_DEV_RST,
+ PORT_CS_DEV_RST, 100);
+ if (tmp & PORT_CS_DEV_RST) {
+ printf("%d port reset failed.\n", dev);
+ return 1;
+ }
+
+ sata = (struct sil_sata *)malloc(sizeof(struct sil_sata));
+ if (!sata) {
+ printf("%d no memory.\n", dev);
+ return 1;
+ }
+ memset((void *)sata, 0, sizeof(struct sil_sata));
+
+ /* turn on port interrupt */
+ tmp = readl((void *)(sata_info.iobase[0] + HOST_CTRL));
+ tmp |= (1 << (dev - sata_info.portbase));
+ writel(tmp, (void *)(sata_info.iobase[0] + HOST_CTRL));
+
+ /* Save the private struct to block device struct */
+ sata_dev_desc[dev].priv = (void *)sata;
+ sata->port = port;
+ sata->devno = sata_info.devno;
+ sprintf(sata->name, "SATA#%d", dev);
+ sil_cmd_soft_reset(dev);
+ tmp = readl(port + PORT_SSTATUS);
+ tmp = (tmp >> 4) & 0xf;
+ printf(" (%s)\n", sata_spd_string(tmp));
+
+ id = (u16 *)malloc(ATA_ID_WORDS * 2);
+ if (!id) {
+ printf("Id malloc failed\n");
+ free((void *)sata);
+ return 1;
+ }
+ sil_cmd_identify_device(dev, id);
+
+#ifdef CONFIG_LBA48
+ /* Check if support LBA48 */
+ if (ata_id_has_lba48(id)) {
+ sata_dev_desc[dev].lba48 = 1;
+ sata->lba48 = 1;
+ debug("Device supports LBA48\n");
+ } else
+ debug("Device supports LBA28\n");
+#endif
+
+ /* Serial number */
+ ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial));
+ memcpy(sata_dev_desc[dev].product, serial, sizeof(serial));
+
+ /* Firmware version */
+ ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware));
+ memcpy(sata_dev_desc[dev].revision, firmware, sizeof(firmware));
+
+ /* Product model */
+ ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product));
+ memcpy(sata_dev_desc[dev].vendor, product, sizeof(product));
+
+ /* Totoal sectors */
+ sata_dev_desc[dev].lba = ata_id_n_sectors(id);
+
+ sil_sata_init_wcache(dev, id);
+ sil_cmd_set_feature(dev);
+
+#ifdef DEBUG
+ sil_cmd_identify_device(dev, id);
+ ata_dump_id(id);
+#endif
+ free((void *)id);
+
+ return 0;
+}
diff --git a/drivers/ata/sata_sil.h b/drivers/ata/sata_sil.h
new file mode 100644
index 0000000000..55954efdd6
--- /dev/null
+++ b/drivers/ata/sata_sil.h
@@ -0,0 +1,214 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ * Author: Tang Yuantian <b29983@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef SATA_SIL3132_H
+#define SATA_SIL3132_H
+
+#define READ_CMD 0
+#define WRITE_CMD 1
+
+/*
+ * SATA device driver struct for each dev
+ */
+struct sil_sata {
+ char name[12];
+ void *port; /* the port base address */
+ int lba48;
+ u16 pio;
+ u16 mwdma;
+ u16 udma;
+ pci_dev_t devno;
+ int wcache;
+ int flush;
+ int flush_ext;
+};
+
+/* sata info for each controller */
+struct sata_info {
+ ulong iobase[3];
+ pci_dev_t devno;
+ int portbase;
+ int maxport;
+};
+
+/*
+ * Scatter gather entry (SGE),MUST 8 bytes aligned
+ */
+struct sil_sge {
+ __le64 addr;
+ __le32 cnt;
+ __le32 flags;
+} __attribute__ ((aligned(8), packed));
+
+/*
+ * Port request block, MUST 8 bytes aligned
+ */
+struct sil_prb {
+ __le16 ctrl;
+ __le16 prot;
+ __le32 rx_cnt;
+ struct sata_fis_h2d fis;
+} __attribute__ ((aligned(8), packed));
+
+struct sil_cmd_block {
+ struct sil_prb prb;
+ struct sil_sge sge;
+};
+
+enum {
+ HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */
+ HOST_CTRL = 0x40,
+ HOST_IRQ_STAT = 0x44,
+ HOST_PHY_CFG = 0x48,
+ HOST_BIST_CTRL = 0x50,
+ HOST_BIST_PTRN = 0x54,
+ HOST_BIST_STAT = 0x58,
+ HOST_MEM_BIST_STAT = 0x5c,
+ HOST_FLASH_CMD = 0x70,
+ /* 8 bit regs */
+ HOST_FLASH_DATA = 0x74,
+ HOST_TRANSITION_DETECT = 0x75,
+ HOST_GPIO_CTRL = 0x76,
+ HOST_I2C_ADDR = 0x78, /* 32 bit */
+ HOST_I2C_DATA = 0x7c,
+ HOST_I2C_XFER_CNT = 0x7e,
+ HOST_I2C_CTRL = 0x7f,
+
+ /* HOST_SLOT_STAT bits */
+ HOST_SSTAT_ATTN = (1 << 31),
+
+ /* HOST_CTRL bits */
+ HOST_CTRL_M66EN = (1 << 16), /* M66EN PCI bus signal */
+ HOST_CTRL_TRDY = (1 << 17), /* latched PCI TRDY */
+ HOST_CTRL_STOP = (1 << 18), /* latched PCI STOP */
+ HOST_CTRL_DEVSEL = (1 << 19), /* latched PCI DEVSEL */
+ HOST_CTRL_REQ64 = (1 << 20), /* latched PCI REQ64 */
+ HOST_CTRL_GLOBAL_RST = (1 << 31), /* global reset */
+
+ /*
+ * Port registers
+ * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
+ */
+ PORT_REGS_SIZE = 0x2000,
+
+ PORT_LRAM = 0x0000, /* 31 LRAM slots and PMP regs */
+ PORT_LRAM_SLOT_SZ = 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */
+
+ PORT_PMP = 0x0f80, /* 8 bytes PMP * 16 (128 bytes) */
+ PORT_PMP_STATUS = 0x0000, /* port device status offset */
+ PORT_PMP_QACTIVE = 0x0004, /* port device QActive offset */
+ PORT_PMP_SIZE = 0x0008, /* 8 bytes per PMP */
+
+ /* 32 bit regs */
+ PORT_CTRL_STAT = 0x1000, /* write: ctrl-set, read: stat */
+ PORT_CTRL_CLR = 0x1004, /* write: ctrl-clear */
+ PORT_IRQ_STAT = 0x1008, /* high: status, low: interrupt */
+ PORT_IRQ_ENABLE_SET = 0x1010, /* write: enable-set */
+ PORT_IRQ_ENABLE_CLR = 0x1014, /* write: enable-clear */
+ PORT_ACTIVATE_UPPER_ADDR = 0x101c,
+ PORT_EXEC_FIFO = 0x1020, /* command execution fifo */
+ PORT_CMD_ERR = 0x1024, /* command error number */
+ PORT_FIS_CFG = 0x1028,
+ PORT_FIFO_THRES = 0x102c,
+
+ /* 16 bit regs */
+ PORT_DECODE_ERR_CNT = 0x1040,
+ PORT_DECODE_ERR_THRESH = 0x1042,
+ PORT_CRC_ERR_CNT = 0x1044,
+ PORT_CRC_ERR_THRESH = 0x1046,
+ PORT_HSHK_ERR_CNT = 0x1048,
+ PORT_HSHK_ERR_THRESH = 0x104a,
+
+ /* 32 bit regs */
+ PORT_PHY_CFG = 0x1050,
+ PORT_SLOT_STAT = 0x1800,
+ PORT_CMD_ACTIVATE = 0x1c00, /* 64 bit cmd activate * 31 */
+ PORT_CONTEXT = 0x1e04,
+ PORT_EXEC_DIAG = 0x1e00, /* 32bit exec diag * 16 */
+ PORT_PSD_DIAG = 0x1e40, /* 32bit psd diag * 16 */
+ PORT_SCONTROL = 0x1f00,
+ PORT_SSTATUS = 0x1f04,
+ PORT_SERROR = 0x1f08,
+ PORT_SACTIVE = 0x1f0c,
+
+ /* PORT_CTRL_STAT bits */
+ PORT_CS_PORT_RST = (1 << 0), /* port reset */
+ PORT_CS_DEV_RST = (1 << 1), /* device reset */
+ PORT_CS_INIT = (1 << 2), /* port initialize */
+ PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */
+ PORT_CS_CDB16 = (1 << 5), /* 0=12b cdb, 1=16b cdb */
+ PORT_CS_PMP_RESUME = (1 << 6), /* PMP resume */
+ PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */
+ PORT_CS_PMP_EN = (1 << 13), /* port multiplier enable */
+ PORT_CS_RDY = (1 << 31), /* port ready to accept commands */
+
+ /* PORT_IRQ_STAT/ENABLE_SET/CLR */
+ /* bits[11:0] are masked */
+ PORT_IRQ_COMPLETE = (1 << 0), /* command(s) completed */
+ PORT_IRQ_ERROR = (1 << 1), /* command execution error */
+ PORT_IRQ_PORTRDY_CHG = (1 << 2), /* port ready change */
+ PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */
+ PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */
+ PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */
+ PORT_IRQ_UNK_FIS = (1 << 6), /* unknown FIS received */
+ PORT_IRQ_DEV_XCHG = (1 << 7), /* device exchanged */
+ PORT_IRQ_8B10B = (1 << 8), /* 8b/10b decode error threshold */
+ PORT_IRQ_CRC = (1 << 9), /* CRC error threshold */
+ PORT_IRQ_HANDSHAKE = (1 << 10), /* handshake error threshold */
+ PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */
+
+ DEF_PORT_IRQ = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR |
+ PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG |
+ PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_NOTIFY,
+
+ /* bits[27:16] are unmasked (raw) */
+ PORT_IRQ_RAW_SHIFT = 16,
+ PORT_IRQ_MASKED_MASK = 0x7ff,
+ PORT_IRQ_RAW_MASK = (0x7ff << PORT_IRQ_RAW_SHIFT),
+
+ /* ENABLE_SET/CLR specific, intr steering - 2 bit field */
+ PORT_IRQ_STEER_SHIFT = 30,
+ PORT_IRQ_STEER_MASK = (3 << PORT_IRQ_STEER_SHIFT),
+
+ /* PORT_CMD_ERR constants */
+ PORT_CERR_DEV = 1, /* Error bit in D2H Register FIS */
+ PORT_CERR_SDB = 2, /* Error bit in SDB FIS */
+ PORT_CERR_DATA = 3, /* Error in data FIS not detected by dev */
+ PORT_CERR_SEND = 4, /* Initial cmd FIS transmission failure */
+ PORT_CERR_INCONSISTENT = 5, /* Protocol mismatch */
+ PORT_CERR_DIRECTION = 6, /* Data direction mismatch */
+ PORT_CERR_UNDERRUN = 7, /* Ran out of SGEs while writing */
+ PORT_CERR_OVERRUN = 8, /* Ran out of SGEs while reading */
+
+ /* bits of PRB control field */
+ PRB_CTRL_PROTOCOL = (1 << 0), /* override def. ATA protocol */
+ PRB_CTRL_PACKET_READ = (1 << 4), /* PACKET cmd read */
+ PRB_CTRL_PACKET_WRITE = (1 << 5), /* PACKET cmd write */
+ PRB_CTRL_NIEN = (1 << 6), /* Mask completion irq */
+ PRB_CTRL_SRST = (1 << 7), /* Soft reset request (ign BSY?) */
+
+ /* PRB protocol field */
+ PRB_PROT_PACKET = (1 << 0),
+ PRB_PROT_TCQ = (1 << 1),
+ PRB_PROT_NCQ = (1 << 2),
+ PRB_PROT_READ = (1 << 3),
+ PRB_PROT_WRITE = (1 << 4),
+ PRB_PROT_TRANSPARENT = (1 << 5),
+
+ /*
+ * Other constants
+ */
+ SGE_TRM = (1 << 31), /* Last SGE in chain */
+ SGE_LNK = (1 << 30), /* linked list
+ Points to SGT, not SGE */
+ SGE_DRD = (1 << 29), /* discard data read (/dev/null)
+ data address ignored */
+
+ CMD_ERR = 0x21,
+};
+
+#endif
diff --git a/drivers/ata/sata_sil3114.c b/drivers/ata/sata_sil3114.c
new file mode 100644
index 0000000000..61ffb66a77
--- /dev/null
+++ b/drivers/ata/sata_sil3114.c
@@ -0,0 +1,835 @@
+/*
+ * Copyright (C) Excito Elektronik i Skåne AB, All rights reserved.
+ * Author: Tor Krill <tor@excito.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * This is a driver for Silicon Image sil3114 sata chip modelled on
+ * the ata_piix driver
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <command.h>
+#include <config.h>
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <ide.h>
+#include <sata.h>
+#include <libata.h>
+#include "sata_sil3114.h"
+
+/* Convert sectorsize to wordsize */
+#define ATA_SECTOR_WORDS (ATA_SECT_SIZE/2)
+
+/* Forwards */
+u8 sil3114_spin_up (int num);
+u8 sil3114_spin_down (int num);
+static int sata_bus_softreset (int num);
+static void sata_identify (int num, int dev);
+static u8 check_power_mode (int num);
+static void sata_port (struct sata_ioports *ioport);
+static void set_Feature_cmd (int num, int dev);
+static u8 sata_busy_wait (struct sata_ioports *ioaddr, int bits,
+ unsigned int max, u8 usealtstatus);
+static u8 sata_chk_status (struct sata_ioports *ioaddr, u8 usealtstatus);
+static void msleep (int count);
+
+static u32 iobase[6] = { 0, 0, 0, 0, 0, 0}; /* PCI BAR registers for device */
+
+static struct sata_port port[CONFIG_SYS_SATA_MAX_DEVICE];
+
+static void output_data (struct sata_ioports *ioaddr, u16 * sect_buf, int words)
+{
+ while (words--) {
+ __raw_writew (*sect_buf++, (void *)ioaddr->data_addr);
+ }
+}
+
+static int input_data (struct sata_ioports *ioaddr, u16 * sect_buf, int words)
+{
+ while (words--) {
+ *sect_buf++ = __raw_readw ((void *)ioaddr->data_addr);
+ }
+ return 0;
+}
+
+static int sata_bus_softreset (int num)
+{
+ u8 status = 0;
+
+ port[num].dev_mask = 1;
+
+ port[num].ctl_reg = 0x08; /*Default value of control reg */
+ writeb (port[num].ctl_reg, port[num].ioaddr.ctl_addr);
+ udelay (10);
+ writeb (port[num].ctl_reg | ATA_SRST, port[num].ioaddr.ctl_addr);
+ udelay (10);
+ writeb (port[num].ctl_reg, port[num].ioaddr.ctl_addr);
+
+ /* spec mandates ">= 2ms" before checking status.
+ * We wait 150ms, because that was the magic delay used for
+ * ATAPI devices in Hale Landis's ATADRVR, for the period of time
+ * between when the ATA command register is written, and then
+ * status is checked. Because waiting for "a while" before
+ * checking status is fine, post SRST, we perform this magic
+ * delay here as well.
+ */
+ msleep (150);
+ status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 300, 0);
+ while ((status & ATA_BUSY)) {
+ msleep (100);
+ status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 3, 0);
+ }
+
+ if (status & ATA_BUSY) {
+ printf ("ata%u is slow to respond,plz be patient\n", num);
+ }
+
+ while ((status & ATA_BUSY)) {
+ msleep (100);
+ status = sata_chk_status (&port[num].ioaddr, 0);
+ }
+
+ if (status & ATA_BUSY) {
+ printf ("ata%u failed to respond : ", num);
+ printf ("bus reset failed\n");
+ port[num].dev_mask = 0;
+ return 1;
+ }
+ return 0;
+}
+
+static void sata_identify (int num, int dev)
+{
+ u8 cmd = 0, status = 0, devno = num;
+ u16 iobuf[ATA_SECTOR_WORDS];
+ u64 n_sectors = 0;
+
+ memset (iobuf, 0, sizeof (iobuf));
+
+ if (!(port[num].dev_mask & 0x01)) {
+ printf ("dev%d is not present on port#%d\n", dev, num);
+ return;
+ }
+
+ debug ("port=%d dev=%d\n", num, dev);
+
+ status = 0;
+ cmd = ATA_CMD_ID_ATA; /*Device Identify Command */
+ writeb (cmd, port[num].ioaddr.command_addr);
+ readb (port[num].ioaddr.altstatus_addr);
+ udelay (10);
+
+ status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 1000, 0);
+ if (status & ATA_ERR) {
+ printf ("\ndevice not responding\n");
+ port[num].dev_mask &= ~0x01;
+ return;
+ }
+
+ input_data (&port[num].ioaddr, iobuf, ATA_SECTOR_WORDS);
+
+ ata_swap_buf_le16 (iobuf, ATA_SECTOR_WORDS);
+
+ debug ("Specific config: %x\n", iobuf[2]);
+
+ /* we require LBA and DMA support (bits 8 & 9 of word 49) */
+ if (!ata_id_has_dma (iobuf) || !ata_id_has_lba (iobuf)) {
+ debug ("ata%u: no dma/lba\n", num);
+ }
+#ifdef DEBUG
+ ata_dump_id (iobuf);
+#endif
+ n_sectors = ata_id_n_sectors (iobuf);
+
+ if (n_sectors == 0) {
+ port[num].dev_mask &= ~0x01;
+ return;
+ }
+ ata_id_c_string (iobuf, (unsigned char *)sata_dev_desc[devno].revision,
+ ATA_ID_FW_REV, sizeof (sata_dev_desc[devno].revision));
+ ata_id_c_string (iobuf, (unsigned char *)sata_dev_desc[devno].vendor,
+ ATA_ID_PROD, sizeof (sata_dev_desc[devno].vendor));
+ ata_id_c_string (iobuf, (unsigned char *)sata_dev_desc[devno].product,
+ ATA_ID_SERNO, sizeof (sata_dev_desc[devno].product));
+
+ /* TODO - atm we asume harddisk ie not removable */
+ sata_dev_desc[devno].removable = 0;
+
+ sata_dev_desc[devno].lba = (u32) n_sectors;
+ debug("lba=0x%lx\n", sata_dev_desc[devno].lba);
+
+#ifdef CONFIG_LBA48
+ if (iobuf[83] & (1 << 10)) {
+ sata_dev_desc[devno].lba48 = 1;
+ } else {
+ sata_dev_desc[devno].lba48 = 0;
+ }
+#endif
+
+ /* assuming HD */
+ sata_dev_desc[devno].type = DEV_TYPE_HARDDISK;
+ sata_dev_desc[devno].blksz = ATA_SECT_SIZE;
+ sata_dev_desc[devno].lun = 0; /* just to fill something in... */
+}
+
+static void set_Feature_cmd (int num, int dev)
+{
+ u8 status = 0;
+
+ if (!(port[num].dev_mask & 0x01)) {
+ debug ("dev%d is not present on port#%d\n", dev, num);
+ return;
+ }
+
+ writeb (SETFEATURES_XFER, port[num].ioaddr.feature_addr);
+ writeb (XFER_PIO_4, port[num].ioaddr.nsect_addr);
+ writeb (0, port[num].ioaddr.lbal_addr);
+ writeb (0, port[num].ioaddr.lbam_addr);
+ writeb (0, port[num].ioaddr.lbah_addr);
+
+ writeb (ATA_DEVICE_OBS, port[num].ioaddr.device_addr);
+ writeb (ATA_CMD_SET_FEATURES, port[num].ioaddr.command_addr);
+
+ udelay (50);
+ msleep (150);
+
+ status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 5000, 0);
+ if ((status & (ATA_BUSY | ATA_ERR))) {
+ printf ("Error : status 0x%02x\n", status);
+ port[num].dev_mask &= ~0x01;
+ }
+}
+
+u8 sil3114_spin_down (int num)
+{
+ u8 status = 0;
+
+ debug ("Spin down disk\n");
+
+ if (!(port[num].dev_mask & 0x01)) {
+ debug ("Device ata%d is not present\n", num);
+ return 1;
+ }
+
+ if ((status = check_power_mode (num)) == 0x00) {
+ debug ("Already in standby\n");
+ return 0;
+ }
+
+ if (status == 0x01) {
+ printf ("Failed to check power mode on ata%d\n", num);
+ return 1;
+ }
+
+ if (!((status = sata_chk_status (&port[num].ioaddr, 0)) & ATA_DRDY)) {
+ printf ("Device ata%d not ready\n", num);
+ return 1;
+ }
+
+ writeb (0x00, port[num].ioaddr.feature_addr);
+
+ writeb (0x00, port[num].ioaddr.nsect_addr);
+ writeb (0x00, port[num].ioaddr.lbal_addr);
+ writeb (0x00, port[num].ioaddr.lbam_addr);
+ writeb (0x00, port[num].ioaddr.lbah_addr);
+
+ writeb (ATA_DEVICE_OBS, port[num].ioaddr.device_addr);
+ writeb (ATA_CMD_STANDBY, port[num].ioaddr.command_addr);
+
+ status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 30000, 0);
+ if ((status & (ATA_BUSY | ATA_ERR))) {
+ printf ("Error waiting for disk spin down: status 0x%02x\n",
+ status);
+ port[num].dev_mask &= ~0x01;
+ return 1;
+ }
+ return 0;
+}
+
+u8 sil3114_spin_up (int num)
+{
+ u8 status = 0;
+
+ debug ("Spin up disk\n");
+
+ if (!(port[num].dev_mask & 0x01)) {
+ debug ("Device ata%d is not present\n", num);
+ return 1;
+ }
+
+ if ((status = check_power_mode (num)) != 0x00) {
+ if (status == 0x01) {
+ printf ("Failed to check power mode on ata%d\n", num);
+ return 1;
+ } else {
+ /* should be up and running already */
+ return 0;
+ }
+ }
+
+ if (!((status = sata_chk_status (&port[num].ioaddr, 0)) & ATA_DRDY)) {
+ printf ("Device ata%d not ready\n", num);
+ return 1;
+ }
+
+ debug ("Stautus of device check: %d\n", status);
+
+ writeb (0x00, port[num].ioaddr.feature_addr);
+
+ writeb (0x00, port[num].ioaddr.nsect_addr);
+ writeb (0x00, port[num].ioaddr.lbal_addr);
+ writeb (0x00, port[num].ioaddr.lbam_addr);
+ writeb (0x00, port[num].ioaddr.lbah_addr);
+
+ writeb (ATA_DEVICE_OBS, port[num].ioaddr.device_addr);
+ writeb (ATA_CMD_IDLE, port[num].ioaddr.command_addr);
+
+ status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 30000, 0);
+ if ((status & (ATA_BUSY | ATA_ERR))) {
+ printf ("Error waiting for disk spin up: status 0x%02x\n",
+ status);
+ port[num].dev_mask &= ~0x01;
+ return 1;
+ }
+
+ /* Wait for disk to enter Active state */
+ do {
+ msleep (10);
+ status = check_power_mode (num);
+ } while ((status == 0x00) || (status == 0x80));
+
+ if (status == 0x01) {
+ printf ("Falied waiting for disk to spin up\n");
+ return 1;
+ }
+
+ return 0;
+}
+
+/* Return value is not the usual here
+ * 0x00 - Device stand by
+ * 0x01 - Operation failed
+ * 0x80 - Device idle
+ * 0xff - Device active
+*/
+static u8 check_power_mode (int num)
+{
+ u8 status = 0;
+ u8 res = 0;
+ if (!(port[num].dev_mask & 0x01)) {
+ debug ("Device ata%d is not present\n", num);
+ return 1;
+ }
+
+ if (!(sata_chk_status (&port[num].ioaddr, 0) & ATA_DRDY)) {
+ printf ("Device ata%d not ready\n", num);
+ return 1;
+ }
+
+ writeb (0, port[num].ioaddr.feature_addr);
+ writeb (0, port[num].ioaddr.nsect_addr);
+ writeb (0, port[num].ioaddr.lbal_addr);
+ writeb (0, port[num].ioaddr.lbam_addr);
+ writeb (0, port[num].ioaddr.lbah_addr);
+
+ writeb (ATA_DEVICE_OBS, port[num].ioaddr.device_addr);
+ writeb (ATA_CMD_CHK_POWER, port[num].ioaddr.command_addr);
+
+ status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 5000, 0);
+ if ((status & (ATA_BUSY | ATA_ERR))) {
+ printf
+ ("Error waiting for check power mode complete : status 0x%02x\n",
+ status);
+ port[num].dev_mask &= ~0x01;
+ return 1;
+ }
+ res = readb (port[num].ioaddr.nsect_addr);
+ debug ("Check powermode: %d\n", res);
+ return res;
+
+}
+
+static void sata_port (struct sata_ioports *ioport)
+{
+ ioport->data_addr = ioport->cmd_addr + ATA_REG_DATA;
+ ioport->error_addr = ioport->cmd_addr + ATA_REG_ERR;
+ ioport->feature_addr = ioport->cmd_addr + ATA_REG_FEATURE;
+ ioport->nsect_addr = ioport->cmd_addr + ATA_REG_NSECT;
+ ioport->lbal_addr = ioport->cmd_addr + ATA_REG_LBAL;
+ ioport->lbam_addr = ioport->cmd_addr + ATA_REG_LBAM;
+ ioport->lbah_addr = ioport->cmd_addr + ATA_REG_LBAH;
+ ioport->device_addr = ioport->cmd_addr + ATA_REG_DEVICE;
+ ioport->status_addr = ioport->cmd_addr + ATA_REG_STATUS;
+ ioport->command_addr = ioport->cmd_addr + ATA_REG_CMD;
+}
+
+static u8 wait_for_irq (int num, unsigned int max)
+{
+
+ u32 port = iobase[5];
+ switch (num) {
+ case 0:
+ port += VND_TF_CNST_CH0;
+ break;
+ case 1:
+ port += VND_TF_CNST_CH1;
+ break;
+ case 2:
+ port += VND_TF_CNST_CH2;
+ break;
+ case 3:
+ port += VND_TF_CNST_CH3;
+ break;
+ default:
+ return 1;
+ }
+
+ do {
+ if (readl (port) & VND_TF_CNST_INTST) {
+ break;
+ }
+ udelay (1000);
+ max--;
+ } while ((max > 0));
+
+ return (max == 0);
+}
+
+static u8 sata_busy_wait (struct sata_ioports *ioaddr, int bits,
+ unsigned int max, u8 usealtstatus)
+{
+ u8 status;
+
+ do {
+ if (!((status = sata_chk_status (ioaddr, usealtstatus)) & bits)) {
+ break;
+ }
+ udelay (1000);
+ max--;
+ } while ((status & bits) && (max > 0));
+
+ return status;
+}
+
+static u8 sata_chk_status (struct sata_ioports *ioaddr, u8 usealtstatus)
+{
+ if (!usealtstatus) {
+ return readb (ioaddr->status_addr);
+ } else {
+ return readb (ioaddr->altstatus_addr);
+ }
+}
+
+static void msleep (int count)
+{
+ int i;
+
+ for (i = 0; i < count; i++)
+ udelay (1000);
+}
+
+/* Read up to 255 sectors
+ *
+ * Returns sectors read
+*/
+static u8 do_one_read (int device, ulong block, u8 blkcnt, u16 * buff,
+ uchar lba48)
+{
+
+ u8 sr = 0;
+ u8 status;
+ u64 blknr = (u64) block;
+
+ if (!(sata_chk_status (&port[device].ioaddr, 0) & ATA_DRDY)) {
+ printf ("Device ata%d not ready\n", device);
+ return 0;
+ }
+
+ /* Set up transfer */
+#ifdef CONFIG_LBA48
+ if (lba48) {
+ /* write high bits */
+ writeb (0, port[device].ioaddr.nsect_addr);
+ writeb ((blknr >> 24) & 0xFF, port[device].ioaddr.lbal_addr);
+ writeb ((blknr >> 32) & 0xFF, port[device].ioaddr.lbam_addr);
+ writeb ((blknr >> 40) & 0xFF, port[device].ioaddr.lbah_addr);
+ }
+#endif
+ writeb (blkcnt, port[device].ioaddr.nsect_addr);
+ writeb (((blknr) >> 0) & 0xFF, port[device].ioaddr.lbal_addr);
+ writeb ((blknr >> 8) & 0xFF, port[device].ioaddr.lbam_addr);
+ writeb ((blknr >> 16) & 0xFF, port[device].ioaddr.lbah_addr);
+
+#ifdef CONFIG_LBA48
+ if (lba48) {
+ writeb (ATA_LBA, port[device].ioaddr.device_addr);
+ writeb (ATA_CMD_PIO_READ_EXT, port[device].ioaddr.command_addr);
+ } else
+#endif
+ {
+ writeb (ATA_LBA | ((blknr >> 24) & 0xF),
+ port[device].ioaddr.device_addr);
+ writeb (ATA_CMD_PIO_READ, port[device].ioaddr.command_addr);
+ }
+
+ status = sata_busy_wait (&port[device].ioaddr, ATA_BUSY, 10000, 1);
+
+ if (status & ATA_BUSY) {
+ u8 err = 0;
+
+ printf ("Device %d not responding status %d\n", device, status);
+ err = readb (port[device].ioaddr.error_addr);
+ printf ("Error reg = 0x%x\n", err);
+
+ return (sr);
+ }
+ while (blkcnt--) {
+
+ if (wait_for_irq (device, 500)) {
+ printf ("ata%u irq failed\n", device);
+ return sr;
+ }
+
+ status = sata_chk_status (&port[device].ioaddr, 0);
+ if (status & ATA_ERR) {
+ printf ("ata%u error %d\n", device,
+ readb (port[device].ioaddr.error_addr));
+ return sr;
+ }
+ /* Read one sector */
+ input_data (&port[device].ioaddr, buff, ATA_SECTOR_WORDS);
+ buff += ATA_SECTOR_WORDS;
+ sr++;
+
+ }
+ return sr;
+}
+
+ulong sata_read (int device, ulong block, lbaint_t blkcnt, void *buff)
+{
+ ulong n = 0, sread;
+ u16 *buffer = (u16 *) buff;
+ u8 status = 0;
+ u64 blknr = (u64) block;
+ unsigned char lba48 = 0;
+
+#ifdef CONFIG_LBA48
+ if (blknr > 0xfffffff) {
+ if (!sata_dev_desc[device].lba48) {
+ printf ("Drive doesn't support 48-bit addressing\n");
+ return 0;
+ }
+ /* more than 28 bits used, use 48bit mode */
+ lba48 = 1;
+ }
+#endif
+
+ while (blkcnt > 0) {
+
+ if (blkcnt > 255) {
+ sread = 255;
+ } else {
+ sread = blkcnt;
+ }
+
+ status = do_one_read (device, blknr, sread, buffer, lba48);
+ if (status != sread) {
+ printf ("Read failed\n");
+ return n;
+ }
+
+ blkcnt -= sread;
+ blknr += sread;
+ n += sread;
+ buffer += sread * ATA_SECTOR_WORDS;
+ }
+ return n;
+}
+
+ulong sata_write (int device, ulong block, lbaint_t blkcnt, const void *buff)
+{
+ ulong n = 0;
+ u16 *buffer = (u16 *) buff;
+ unsigned char status = 0, num = 0;
+ u64 blknr = (u64) block;
+#ifdef CONFIG_LBA48
+ unsigned char lba48 = 0;
+
+ if (blknr > 0xfffffff) {
+ if (!sata_dev_desc[device].lba48) {
+ printf ("Drive doesn't support 48-bit addressing\n");
+ return 0;
+ }
+ /* more than 28 bits used, use 48bit mode */
+ lba48 = 1;
+ }
+#endif
+ /*Port Number */
+ num = device;
+
+ while (blkcnt-- > 0) {
+ status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 500, 0);
+ if (status & ATA_BUSY) {
+ printf ("ata%u failed to respond\n", port[num].port_no);
+ return n;
+ }
+#ifdef CONFIG_LBA48
+ if (lba48) {
+ /* write high bits */
+ writeb (0, port[num].ioaddr.nsect_addr);
+ writeb ((blknr >> 24) & 0xFF,
+ port[num].ioaddr.lbal_addr);
+ writeb ((blknr >> 32) & 0xFF,
+ port[num].ioaddr.lbam_addr);
+ writeb ((blknr >> 40) & 0xFF,
+ port[num].ioaddr.lbah_addr);
+ }
+#endif
+ writeb (1, port[num].ioaddr.nsect_addr);
+ writeb ((blknr >> 0) & 0xFF, port[num].ioaddr.lbal_addr);
+ writeb ((blknr >> 8) & 0xFF, port[num].ioaddr.lbam_addr);
+ writeb ((blknr >> 16) & 0xFF, port[num].ioaddr.lbah_addr);
+#ifdef CONFIG_LBA48
+ if (lba48) {
+ writeb (ATA_LBA, port[num].ioaddr.device_addr);
+ writeb (ATA_CMD_PIO_WRITE_EXT, port[num].ioaddr.command_addr);
+ } else
+#endif
+ {
+ writeb (ATA_LBA | ((blknr >> 24) & 0xF),
+ port[num].ioaddr.device_addr);
+ writeb (ATA_CMD_PIO_WRITE, port[num].ioaddr.command_addr);
+ }
+
+ msleep (50);
+ /*may take up to 4 sec */
+ status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 4000, 0);
+ if ((status & (ATA_DRQ | ATA_BUSY | ATA_ERR)) != ATA_DRQ) {
+ printf ("Error no DRQ dev %d blk %ld: sts 0x%02x\n",
+ device, (ulong) blknr, status);
+ return (n);
+ }
+
+ output_data (&port[num].ioaddr, buffer, ATA_SECTOR_WORDS);
+ readb (port[num].ioaddr.altstatus_addr);
+ udelay (50);
+
+ ++n;
+ ++blknr;
+ buffer += ATA_SECTOR_WORDS;
+ }
+ return n;
+}
+
+/* Driver implementation */
+static u8 sil_get_device_cache_line (pci_dev_t pdev)
+{
+ u8 cache_line = 0;
+ pci_read_config_byte (pdev, PCI_CACHE_LINE_SIZE, &cache_line);
+ return cache_line;
+}
+
+int init_sata (int dev)
+{
+ static u8 init_done = 0;
+ static int res = 1;
+ pci_dev_t devno;
+ u8 cls = 0;
+ u16 cmd = 0;
+ u32 sconf = 0;
+
+ if (init_done) {
+ return res;
+ }
+
+ init_done = 1;
+
+ if ((devno = pci_find_device (SIL_VEND_ID, SIL3114_DEVICE_ID, 0)) == -1) {
+ res = 1;
+ return res;
+ }
+
+ /* Read out all BARs, even though we only use MMIO from BAR5 */
+ pci_read_config_dword (devno, PCI_BASE_ADDRESS_0, &iobase[0]);
+ pci_read_config_dword (devno, PCI_BASE_ADDRESS_1, &iobase[1]);
+ pci_read_config_dword (devno, PCI_BASE_ADDRESS_2, &iobase[2]);
+ pci_read_config_dword (devno, PCI_BASE_ADDRESS_3, &iobase[3]);
+ pci_read_config_dword (devno, PCI_BASE_ADDRESS_4, &iobase[4]);
+ pci_read_config_dword (devno, PCI_BASE_ADDRESS_5, &iobase[5]);
+
+ if ((iobase[0] == 0xFFFFFFFF) || (iobase[1] == 0xFFFFFFFF) ||
+ (iobase[2] == 0xFFFFFFFF) || (iobase[3] == 0xFFFFFFFF) ||
+ (iobase[4] == 0xFFFFFFFF) || (iobase[5] == 0xFFFFFFFF)) {
+ printf ("Error no base addr for SATA controller\n");
+ res = 1;
+ return res;
+ }
+
+ /* mask off unused bits */
+ iobase[0] &= 0xfffffffc;
+ iobase[1] &= 0xfffffff8;
+ iobase[2] &= 0xfffffffc;
+ iobase[3] &= 0xfffffff8;
+ iobase[4] &= 0xfffffff0;
+ iobase[5] &= 0xfffffc00;
+
+ /* from sata_sil in Linux kernel */
+ cls = sil_get_device_cache_line (devno);
+ if (cls) {
+ cls >>= 3;
+ cls++; /* cls = (line_size/8)+1 */
+ writel (cls << 8 | cls, iobase[5] + VND_FIFOCFG_CH0);
+ writel (cls << 8 | cls, iobase[5] + VND_FIFOCFG_CH1);
+ writel (cls << 8 | cls, iobase[5] + VND_FIFOCFG_CH2);
+ writel (cls << 8 | cls, iobase[5] + VND_FIFOCFG_CH3);
+ } else {
+ printf ("Cache line not set. Driver may not function\n");
+ }
+
+ /* Enable operation */
+ pci_read_config_word (devno, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
+ pci_write_config_word (devno, PCI_COMMAND, cmd);
+
+ /* Disable interrupt usage */
+ pci_read_config_dword (devno, VND_SYSCONFSTAT, &sconf);
+ sconf |= (VND_SYSCONFSTAT_CHN_0_INTBLOCK | VND_SYSCONFSTAT_CHN_1_INTBLOCK);
+ pci_write_config_dword (devno, VND_SYSCONFSTAT, sconf);
+
+ res = 0;
+ return res;
+}
+
+int reset_sata(int dev)
+{
+ return 0;
+}
+
+/* Check if device is connected to port */
+int sata_bus_probe (int portno)
+{
+ u32 port = iobase[5];
+ u32 val;
+ switch (portno) {
+ case 0:
+ port += VND_SSTATUS_CH0;
+ break;
+ case 1:
+ port += VND_SSTATUS_CH1;
+ break;
+ case 2:
+ port += VND_SSTATUS_CH2;
+ break;
+ case 3:
+ port += VND_SSTATUS_CH3;
+ break;
+ default:
+ return 0;
+ }
+ val = readl (port);
+ if ((val & SATA_DET_PRES) == SATA_DET_PRES) {
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+int sata_phy_reset (int portno)
+{
+ u32 port = iobase[5];
+ u32 val;
+ switch (portno) {
+ case 0:
+ port += VND_SCONTROL_CH0;
+ break;
+ case 1:
+ port += VND_SCONTROL_CH1;
+ break;
+ case 2:
+ port += VND_SCONTROL_CH2;
+ break;
+ case 3:
+ port += VND_SCONTROL_CH3;
+ break;
+ default:
+ return 0;
+ }
+ val = readl (port);
+ writel (val | SATA_SC_DET_RST, port);
+ msleep (150);
+ writel (val & ~SATA_SC_DET_RST, port);
+ return 0;
+}
+
+int scan_sata (int dev)
+{
+ /* A bit brain dead, but the code has a legacy */
+ switch (dev) {
+ case 0:
+ port[0].port_no = 0;
+ port[0].ioaddr.cmd_addr = iobase[5] + VND_TF0_CH0;
+ port[0].ioaddr.altstatus_addr = port[0].ioaddr.ctl_addr =
+ (iobase[5] + VND_TF2_CH0) | ATA_PCI_CTL_OFS;
+ port[0].ioaddr.bmdma_addr = iobase[5] + VND_BMDMA_CH0;
+ break;
+#if (CONFIG_SYS_SATA_MAX_DEVICE >= 1)
+ case 1:
+ port[1].port_no = 0;
+ port[1].ioaddr.cmd_addr = iobase[5] + VND_TF0_CH1;
+ port[1].ioaddr.altstatus_addr = port[1].ioaddr.ctl_addr =
+ (iobase[5] + VND_TF2_CH1) | ATA_PCI_CTL_OFS;
+ port[1].ioaddr.bmdma_addr = iobase[5] + VND_BMDMA_CH1;
+ break;
+#elif (CONFIG_SYS_SATA_MAX_DEVICE >= 2)
+ case 2:
+ port[2].port_no = 0;
+ port[2].ioaddr.cmd_addr = iobase[5] + VND_TF0_CH2;
+ port[2].ioaddr.altstatus_addr = port[2].ioaddr.ctl_addr =
+ (iobase[5] + VND_TF2_CH2) | ATA_PCI_CTL_OFS;
+ port[2].ioaddr.bmdma_addr = iobase[5] + VND_BMDMA_CH2;
+ break;
+#elif (CONFIG_SYS_SATA_MAX_DEVICE >= 3)
+ case 3:
+ port[3].port_no = 0;
+ port[3].ioaddr.cmd_addr = iobase[5] + VND_TF0_CH3;
+ port[3].ioaddr.altstatus_addr = port[3].ioaddr.ctl_addr =
+ (iobase[5] + VND_TF2_CH3) | ATA_PCI_CTL_OFS;
+ port[3].ioaddr.bmdma_addr = iobase[5] + VND_BMDMA_CH3;
+ break;
+#endif
+ default:
+ printf ("Tried to scan unknown port: ata%d\n", dev);
+ return 1;
+ }
+
+ /* Initialize other registers */
+ sata_port (&port[dev].ioaddr);
+
+ /* Check for attached device */
+ if (!sata_bus_probe (dev)) {
+ port[dev].port_state = 0;
+ debug ("SATA#%d port is not present\n", dev);
+ } else {
+ debug ("SATA#%d port is present\n", dev);
+ if (sata_bus_softreset (dev)) {
+ /* soft reset failed, try a hard one */
+ sata_phy_reset (dev);
+ if (sata_bus_softreset (dev)) {
+ port[dev].port_state = 0;
+ } else {
+ port[dev].port_state = 1;
+ }
+ } else {
+ port[dev].port_state = 1;
+ }
+ }
+ if (port[dev].port_state == 1) {
+ /* Probe device and set xfer mode */
+ sata_identify (dev, 0);
+ set_Feature_cmd (dev, 0);
+ }
+
+ return 0;
+}
diff --git a/drivers/ata/sata_sil3114.h b/drivers/ata/sata_sil3114.h
new file mode 100644
index 0000000000..091fca1d40
--- /dev/null
+++ b/drivers/ata/sata_sil3114.h
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) Excito Elektronik i Skåne AB, All rights reserved.
+ * Author: Tor Krill <tor@excito.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef SATA_SIL3114_H
+#define SATA_SIL3114_H
+
+struct sata_ioports {
+ unsigned long cmd_addr;
+ unsigned long data_addr;
+ unsigned long error_addr;
+ unsigned long feature_addr;
+ unsigned long nsect_addr;
+ unsigned long lbal_addr;
+ unsigned long lbam_addr;
+ unsigned long lbah_addr;
+ unsigned long device_addr;
+ unsigned long status_addr;
+ unsigned long command_addr;
+ unsigned long altstatus_addr;
+ unsigned long ctl_addr;
+ unsigned long bmdma_addr;
+ unsigned long scr_addr;
+};
+
+struct sata_port {
+ unsigned char port_no; /* primary=0, secondary=1 */
+ struct sata_ioports ioaddr; /* ATA cmd/ctl/dma reg blks */
+ unsigned char ctl_reg;
+ unsigned char last_ctl;
+ unsigned char port_state; /* 1-port is available and */
+ /* 0-port is not available */
+ unsigned char dev_mask;
+};
+
+/* Missing ata defines */
+#define ATA_CMD_STANDBY 0xE2
+#define ATA_CMD_STANDBYNOW1 0xE0
+#define ATA_CMD_IDLE 0xE3
+#define ATA_CMD_IDLEIMMEDIATE 0xE1
+
+/* Defines for SIL3114 chip */
+
+/* PCI defines */
+#define SIL_VEND_ID 0x1095
+#define SIL3114_DEVICE_ID 0x3114
+
+/* some vendor specific registers */
+#define VND_SYSCONFSTAT 0x88 /* System Configuration Status and Command */
+#define VND_SYSCONFSTAT_CHN_0_INTBLOCK (1<<22)
+#define VND_SYSCONFSTAT_CHN_1_INTBLOCK (1<<23)
+#define VND_SYSCONFSTAT_CHN_2_INTBLOCK (1<<24)
+#define VND_SYSCONFSTAT_CHN_3_INTBLOCK (1<<25)
+
+/* internal registers mapped by BAR5 */
+/* SATA Control*/
+#define VND_SCONTROL_CH0 0x100
+#define VND_SCONTROL_CH1 0x180
+#define VND_SCONTROL_CH2 0x300
+#define VND_SCONTROL_CH3 0x380
+
+#define SATA_SC_IPM_T2P (1<<16)
+#define SATA_SC_IPM_T2S (2<<16)
+#define SATA_SC_SPD_1_5 (1<<4)
+#define SATA_SC_SPD_3_0 (2<<4)
+#define SATA_SC_DET_RST (1) /* ATA Reset sequence */
+#define SATA_SC_DET_PDIS (4) /* PHY Disable */
+
+/* SATA Status */
+#define VND_SSTATUS_CH0 0x104
+#define VND_SSTATUS_CH1 0x184
+#define VND_SSTATUS_CH2 0x304
+#define VND_SSTATUS_CH3 0x384
+
+#define SATA_SS_IPM_ACTIVE (1<<8)
+#define SATA_SS_IPM_PARTIAL (2<<8)
+#define SATA_SS_IPM_SLUMBER (6<<8)
+#define SATA_SS_SPD_1_5 (1<<4)
+#define SATA_SS_SPD_3_0 (2<<4)
+#define SATA_DET_P_NOPHY (1) /* Device presence but no PHY connection established */
+#define SATA_DET_PRES (3) /* Device presence and active PHY */
+#define SATA_DET_OFFLINE (4) /* Device offline or in loopback mode */
+
+/* Task file registers in BAR5 mapping */
+#define VND_TF0_CH0 0x80
+#define VND_TF0_CH1 0xc0
+#define VND_TF0_CH2 0x280
+#define VND_TF0_CH3 0x2c0
+#define VND_TF1_CH0 0x88
+#define VND_TF1_CH1 0xc8
+#define VND_TF1_CH2 0x288
+#define VND_TF1_CH3 0x2c8
+#define VND_TF2_CH0 0x88
+#define VND_TF2_CH1 0xc8
+#define VND_TF2_CH2 0x288
+#define VND_TF2_CH3 0x2c8
+
+#define VND_BMDMA_CH0 0x00
+#define VND_BMDMA_CH1 0x08
+#define VND_BMDMA_CH2 0x200
+#define VND_BMDMA_CH3 0x208
+#define VND_BMDMA2_CH0 0x10
+#define VND_BMDMA2_CH1 0x18
+#define VND_BMDMA2_CH2 0x210
+#define VND_BMDMA2_CH3 0x218
+
+/* FIFO control */
+#define VND_FIFOCFG_CH0 0x40
+#define VND_FIFOCFG_CH1 0x44
+#define VND_FIFOCFG_CH2 0x240
+#define VND_FIFOCFG_CH3 0x244
+
+/* Task File configuration and status */
+#define VND_TF_CNST_CH0 0xa0
+#define VND_TF_CNST_CH1 0xe0
+#define VND_TF_CNST_CH2 0x2a0
+#define VND_TF_CNST_CH3 0x2e0
+
+#define VND_TF_CNST_BFCMD (1<<1)
+#define VND_TF_CNST_CHNRST (1<<2)
+#define VND_TF_CNST_VDMA (1<<10)
+#define VND_TF_CNST_INTST (1<<11)
+#define VND_TF_CNST_WDTO (1<<12)
+#define VND_TF_CNST_WDEN (1<<13)
+#define VND_TF_CNST_WDIEN (1<<14)
+
+/* for testing */
+#define VND_SSDR 0x04c /* System Software Data Register */
+#define VND_FMACS 0x050 /* Flash Memory Address control and status */
+
+#endif