wandboard: Add support for the MX6QP variant

Add support for the latest MX6QP wandboard variant.

Based on Richard Hu's work from Technexion's U-Boot tree.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>

4 files changed, 132 insertions, 4 deletions

diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index 86e267087a..624ccecfd6 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -346,6 +346,9 @@
 #define IOMUXC_SNVS_BASE_ADDR       (AIPS3_ARB_BASE_ADDR + 0x90000)
 #define SNVS_GPR_BASE_ADDR          (AIPS3_ARB_BASE_ADDR + 0x94000)
 #endif
+
+#define NOC_DDR_BASE_ADDR           (GPV0_BASE_ADDR + 0xB0000)
+
 /* Only for i.MX6SX */
 #define LCDIF2_BASE_ADDR            (AIPS3_ARB_BASE_ADDR + 0x24000)
 #define MX6SX_LCDIF1_BASE_ADDR      (AIPS3_ARB_BASE_ADDR + 0x20000)
diff --git a/board/wandboard/spl.c b/board/wandboard/spl.c
index 00c75d0682..d6f568bb92 100644
--- a/board/wandboard/spl.c
+++ b/board/wandboard/spl.c
@@ -32,6 +32,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define IMX6DQ_DRIVE_STRENGTH		0x30
 #define IMX6SDL_DRIVE_STRENGTH		0x28
+#define IMX6QP_DRIVE_STRENGTH		0x28
 
 /* configure MX6Q/DUAL mmdc DDR io registers */
 static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = {
@@ -63,6 +64,36 @@ static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = {
 	.dram_dqm7 = IMX6DQ_DRIVE_STRENGTH,
 };
 
+/* configure MX6QP mmdc DDR io registers */
+static struct mx6dq_iomux_ddr_regs mx6qp_ddr_ioregs = {
+	.dram_sdclk_0 = IMX6QP_DRIVE_STRENGTH,
+	.dram_sdclk_1 = IMX6QP_DRIVE_STRENGTH,
+	.dram_cas = IMX6QP_DRIVE_STRENGTH,
+	.dram_ras = IMX6QP_DRIVE_STRENGTH,
+	.dram_reset = IMX6QP_DRIVE_STRENGTH,
+	.dram_sdcke0 = IMX6QP_DRIVE_STRENGTH,
+	.dram_sdcke1 = IMX6QP_DRIVE_STRENGTH,
+	.dram_sdba2 = 0x00000000,
+	.dram_sdodt0 = IMX6QP_DRIVE_STRENGTH,
+	.dram_sdodt1 = IMX6QP_DRIVE_STRENGTH,
+	.dram_sdqs0 = IMX6QP_DRIVE_STRENGTH,
+	.dram_sdqs1 = IMX6QP_DRIVE_STRENGTH,
+	.dram_sdqs2 = IMX6QP_DRIVE_STRENGTH,
+	.dram_sdqs3 = IMX6QP_DRIVE_STRENGTH,
+	.dram_sdqs4 = IMX6QP_DRIVE_STRENGTH,
+	.dram_sdqs5 = IMX6QP_DRIVE_STRENGTH,
+	.dram_sdqs6 = IMX6QP_DRIVE_STRENGTH,
+	.dram_sdqs7 = IMX6QP_DRIVE_STRENGTH,
+	.dram_dqm0 = IMX6QP_DRIVE_STRENGTH,
+	.dram_dqm1 = IMX6QP_DRIVE_STRENGTH,
+	.dram_dqm2 = IMX6QP_DRIVE_STRENGTH,
+	.dram_dqm3 = IMX6QP_DRIVE_STRENGTH,
+	.dram_dqm4 = IMX6QP_DRIVE_STRENGTH,
+	.dram_dqm5 = IMX6QP_DRIVE_STRENGTH,
+	.dram_dqm6 = IMX6QP_DRIVE_STRENGTH,
+	.dram_dqm7 = IMX6QP_DRIVE_STRENGTH,
+};
+
 /* configure MX6Q/DUAL mmdc GRP io registers */
 static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = {
 	.grp_ddr_type = 0x000c0000,
@@ -81,6 +112,24 @@ static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = {
 	.grp_b7ds = IMX6DQ_DRIVE_STRENGTH,
 };
 
+/* configure MX6QP mmdc GRP io registers */
+static struct mx6dq_iomux_grp_regs mx6qp_grp_ioregs = {
+	.grp_ddr_type = 0x000c0000,
+	.grp_ddrmode_ctl = 0x00020000,
+	.grp_ddrpke = 0x00000000,
+	.grp_addds = IMX6QP_DRIVE_STRENGTH,
+	.grp_ctlds = IMX6QP_DRIVE_STRENGTH,
+	.grp_ddrmode = 0x00020000,
+	.grp_b0ds = IMX6QP_DRIVE_STRENGTH,
+	.grp_b1ds = IMX6QP_DRIVE_STRENGTH,
+	.grp_b2ds = IMX6QP_DRIVE_STRENGTH,
+	.grp_b3ds = IMX6QP_DRIVE_STRENGTH,
+	.grp_b4ds = IMX6QP_DRIVE_STRENGTH,
+	.grp_b5ds = IMX6QP_DRIVE_STRENGTH,
+	.grp_b6ds = IMX6QP_DRIVE_STRENGTH,
+	.grp_b7ds = IMX6QP_DRIVE_STRENGTH,
+};
+
 /* configure MX6SOLO/DUALLITE mmdc DDR io registers */
 struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = {
 	.dram_sdclk_0 = IMX6SDL_DRIVE_STRENGTH,
@@ -260,15 +309,87 @@ static void ccgr_init(void)
 	writel(0x00C03F3F, &ccm->CCGR0);
 	writel(0x0030FC03, &ccm->CCGR1);
 	writel(0x0FFFC000, &ccm->CCGR2);
-	writel(0x3FF00000, &ccm->CCGR3);
+	writel(0x3FF03000, &ccm->CCGR3);
 	writel(0x00FFF300, &ccm->CCGR4);
 	writel(0x0F0000C3, &ccm->CCGR5);
 	writel(0x000003FF, &ccm->CCGR6);
 }
 
+static void spl_dram_init_imx6qp_lpddr3(void)
+{
+	/* MMDC0_MDSCR set the Configuration request bit during MMDC set up */
+	writel(0x00008000, MMDC_P0_BASE_ADDR + 0x01c);
+	/* Calibrations - ZQ */
+	writel(0xa1390003, MMDC_P0_BASE_ADDR + 0x800);
+	/* write leveling */
+	writel(0x00060004, MMDC_P0_BASE_ADDR + 0x80c);
+	writel(0x000B0004, MMDC_P0_BASE_ADDR + 0x810);
+	writel(0x00000004, MMDC_P1_BASE_ADDR + 0x80c);
+	writel(0x00000000, MMDC_P1_BASE_ADDR + 0x810);
+	/*
+	 * DQS gating, read delay, write delay calibration values
+	 * based on calibration compare of 0x00ffff00
+	 */
+	writel(0x03040314, MMDC_P0_BASE_ADDR + 0x83c);
+	writel(0x03080300, MMDC_P0_BASE_ADDR + 0x840);
+	writel(0x03000310, MMDC_P1_BASE_ADDR + 0x83c);
+	writel(0x0268023C, MMDC_P1_BASE_ADDR + 0x840);
+	writel(0x4034363A, MMDC_P0_BASE_ADDR + 0x848);
+	writel(0x36302C3C, MMDC_P1_BASE_ADDR + 0x848);
+	writel(0x3E3E4046, MMDC_P0_BASE_ADDR + 0x850);
+	writel(0x483A4844, MMDC_P1_BASE_ADDR + 0x850);
+	writel(0x33333333, MMDC_P0_BASE_ADDR + 0x81c);
+	writel(0x33333333, MMDC_P0_BASE_ADDR + 0x820);
+	writel(0x33333333, MMDC_P0_BASE_ADDR + 0x824);
+	writel(0x33333333, MMDC_P0_BASE_ADDR + 0x828);
+	writel(0x33333333, MMDC_P1_BASE_ADDR + 0x81c);
+	writel(0x33333333, MMDC_P1_BASE_ADDR + 0x820);
+	writel(0x33333333, MMDC_P1_BASE_ADDR + 0x824);
+	writel(0x33333333, MMDC_P1_BASE_ADDR + 0x828);
+	writel(0x24912489, MMDC_P0_BASE_ADDR + 0x8c0);
+	writel(0x24914452, MMDC_P1_BASE_ADDR + 0x8c0);
+	writel(0x00000800, MMDC_P0_BASE_ADDR + 0x8b8);
+	writel(0x00000800, MMDC_P1_BASE_ADDR + 0x8b8);
+	/* MMDC init: in DDR3, 64-bit mode, only MMDC0 is initiated */
+	writel(0x00020036, MMDC_P0_BASE_ADDR + 0x004);
+	writel(0x09444040, MMDC_P0_BASE_ADDR + 0x008);
+	writel(0x898E79A4, MMDC_P0_BASE_ADDR + 0x00c);
+	writel(0xDB538F64, MMDC_P0_BASE_ADDR + 0x010);
+	writel(0x01FF00DD, MMDC_P0_BASE_ADDR + 0x014);
+	writel(0x00011740, MMDC_P0_BASE_ADDR + 0x018);
+	writel(0x00008000, MMDC_P0_BASE_ADDR + 0x01c);
+	writel(0x000026D2, MMDC_P0_BASE_ADDR + 0x02c);
+	writel(0x008E1023, MMDC_P0_BASE_ADDR + 0x030);
+	writel(0x00000047, MMDC_P0_BASE_ADDR + 0x040);
+	writel(0x14420000, MMDC_P0_BASE_ADDR + 0x400);
+	writel(0x841A0000, MMDC_P0_BASE_ADDR + 0x000);
+	writel(0x00400c58, MMDC_P0_BASE_ADDR + 0x890);
+	/* add NOC DDR configuration */
+	writel(0x00000000, NOC_DDR_BASE_ADDR + 0x008);
+	writel(0x2871C39B, NOC_DDR_BASE_ADDR + 0x00c);
+	writel(0x000005B4, NOC_DDR_BASE_ADDR + 0x038);
+	writel(0x00000040, NOC_DDR_BASE_ADDR + 0x014);
+	writel(0x00000020, NOC_DDR_BASE_ADDR + 0x028);
+	writel(0x00000020, NOC_DDR_BASE_ADDR + 0x02c);
+	writel(0x02088032, MMDC_P0_BASE_ADDR + 0x01c);
+	writel(0x00008033, MMDC_P0_BASE_ADDR + 0x01c);
+	writel(0x00048031, MMDC_P0_BASE_ADDR + 0x01c);
+	writel(0x19308030, MMDC_P0_BASE_ADDR + 0x01c);
+	writel(0x04008040, MMDC_P0_BASE_ADDR + 0x01c);
+	writel(0x00007800, MMDC_P0_BASE_ADDR + 0x020);
+	writel(0x00022227, MMDC_P0_BASE_ADDR + 0x818);
+	writel(0x00022227, MMDC_P1_BASE_ADDR + 0x818);
+	writel(0x00025576, MMDC_P0_BASE_ADDR + 0x004);
+	writel(0x00011006, MMDC_P0_BASE_ADDR + 0x404);
+	writel(0x00000000, MMDC_P0_BASE_ADDR + 0x01c);
+}
+
 static void spl_dram_init(void)
 {
-	if (is_cpu_type(MXC_CPU_MX6SOLO)) {
+	if (is_mx6dqp()) {
+		mx6dq_dram_iocfg(64, &mx6qp_ddr_ioregs, &mx6qp_grp_ioregs);
+		spl_dram_init_imx6qp_lpddr3();
+	} else if (is_cpu_type(MXC_CPU_MX6SOLO)) {
 		mx6sdl_dram_iocfg(32, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);
 		mx6_dram_cfg(&mem_s, &mx6s_512m_mmdc_calib, &h5tq2g63dfr);
 	} else if (is_cpu_type(MXC_CPU_MX6DL)) {
diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c
index 6d2609ce11..051560fb01 100644
--- a/board/wandboard/wandboard.c
+++ b/board/wandboard/wandboard.c
@@ -512,7 +512,9 @@ int board_late_init(void)
 #endif
 
 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-	if (is_mx6dq())
+	if (is_mx6dqp())
+		env_set("board_rev", "MX6QP");
+	else if (is_mx6dq())
 		env_set("board_rev", "MX6Q");
 	else
 		env_set("board_rev", "MX6DL");
@@ -534,7 +536,7 @@ int board_init(void)
 
 #if defined(CONFIG_VIDEO_IPUV3)
 	setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c2_pad_info);
-	if (is_mx6dq()) {
+	if (is_mx6dq() || is_mx6dqp()) {
 		setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c2_pad_info);
 		setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c3_pad_info);
 	} else {
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index ba88d02b88..8fdfc0277d 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -109,6 +109,8 @@
 			"fi; "	\
 		"fi\0" \
 	"findfdt="\
+		"if test $board_name = D1 && test $board_rev = MX6QP ; then " \
+			"setenv fdtfile imx6qp-wandboard-revd1.dtb; fi; " \
 		"if test $board_name = D1 && test $board_rev = MX6Q ; then " \
 			"setenv fdtfile imx6q-wandboard-revd1.dtb; fi; " \
 		"if test $board_name = D1 && test $board_rev = MX6DL ; then " \