sync px30-evb.dts from kernel

1 files changed, 301 insertions, 14 deletions

diff --git a/arch/arm/dts/px30-evb.dts b/arch/arm/dts/px30-evb.dts
index 9fa531bd96..089a7ade4e 100644
--- a/arch/arm/dts/px30-evb.dts
+++ b/arch/arm/dts/px30-evb.dts
@@ -59,6 +59,14 @@
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 25000 0>;
+		power-supply = <&vcc3v3_lcd>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
 	};
 
 	sdio_pwrseq: sdio-pwrseq {
@@ -75,13 +83,6 @@
 		reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */
 	};
 
-	vcc_phy: vcc-phy-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_phy";
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
 	vcc5v0_sys: vccsys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_sys";
@@ -92,21 +93,79 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
 &display_subsystem {
 	status = "okay";
 };
 
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "sitronix,st7703";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_1v8>;
+		vci-supply = <&vcc3v3_lcd>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				mipi_in_panel: endpoint {
+					remote-endpoint = <&mipi_out_panel>;
+				};
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
 &emmc {
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	mmc-hs200-1_8v;
 	non-removable;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v0>;
+	vqmmc-supply = <&vccio_flash>;
 	status = "okay";
 };
 
 &gmac {
-	clock_in_out = "input";
-	phy-supply = <&vcc_phy>;
+	clock_in_out = "output";
+	phy-supply = <&vcc_rmii>;
 	snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 50000 50000>;
@@ -115,6 +174,219 @@
 
 &i2c0 {
 	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v0: vcc_rmii: DCDC_REG4 {
+				regulator-name = "vcc_3v0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG5 {
+				regulator-name = "vcc3v3_sys";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v0: LDO_REG1 {
+				regulator-name = "vcc_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_1v8: vccio_flash: vccio_sdio: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v0_pmu: LDO_REG4 {
+				regulator-name = "vcc3v0_pmu";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG7 {
+				regulator-name = "vcc2v8_dvp";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v5_dvp: LDO_REG9 {
+				regulator-name = "vcc1v5_dvp";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcc3v3_lcd: SWITCH_REG1 {
+				regulator-name = "vcc3v3_lcd";
+				regulator-boot-on;
+			};
+
+			vcc5v0_host: SWITCH_REG2 {
+				regulator-name = "vcc5v0_host";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
 };
 
 &i2s1_2ch {
@@ -123,6 +395,13 @@
 
 &io_domains {
 	status = "okay";
+
+	vccio1-supply = <&vccio_sdio>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v0>;
+	vccio4-supply = <&vcc3v0_pmu>;
+	vccio5-supply = <&vcc_3v0>;
+	vccio6-supply = <&vccio_flash>;
 };
 
 &pinctrl {
@@ -133,6 +412,12 @@
 		};
 	};
 
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int: pmic_int {
 			rockchip,pins =
@@ -165,6 +450,9 @@
 
 &pmu_io_domains {
 	status = "okay";
+
+	pmuio1-supply = <&vcc3v0_pmu>;
+	pmuio2-supply = <&vcc3v0_pmu>;
 };
 
 &pwm1 {
@@ -172,6 +460,7 @@
 };
 
 &saradc {
+	vref-supply = <&vcc_1v8>;
 	status = "okay";
 };
 
@@ -184,6 +473,8 @@
 	sd-uhs-sdr25;
 	sd-uhs-sdr50;
 	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
 	status = "okay";
 };
 
@@ -199,7 +490,7 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_xfer>;
+	pinctrl-0 = <&uart1_xfer &uart1_cts>;
 	status = "okay";
 };
 
@@ -207,10 +498,6 @@
 	status = "okay";
 };
 
-/*&uart2 {
-	status = "okay";
-}; */
-
 &usb20_otg {
 	status = "okay";
 };