1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH
*/
/dts-v1/;
#include "rk3368-lion.dtsi"
/ {
model = "Theobroma Systems RK3368-uQ7 Baseboard";
compatible = "tsd,rk3368-lion-haikou", "rockchip,rk3368";
chosen {
stdout-path = "serial0:115200n8";
};
i2cmux2 {
i2c@0 {
eeprom: eeprom@50 {
compatible = "atmel,24c01";
pagesize = <8>;
reg = <0x50>;
};
};
};
leds {
pinctrl-0 = <&led_pins_module>, <&led_sd_haikou>;
sd-card-led {
label = "sd_card_led";
gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
};
};
dc_12v: dc-12v {
compatible = "regulator-fixed";
regulator-name = "dc_12v";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
vcc3v3_baseboard: vcc3v3-baseboard {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_baseboard";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&dc_12v>;
};
};
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
cd-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>;
disable-wp;
max-frequency = <25000000>;
card-detect-delay = <200>;
supports-sd;
no-emmc;
no-sdio;
sd-uhs-sdr12;
sd-uhs-sdr25;
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
vmmc-supply = <&vcc3v3_baseboard>;
status = "okay";
};
&spi2 {
cs-gpios = <0>, <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
status = "okay";
};
&uart1 {
/* alternate function of GPIO5/6 - change to "okay" to enable */
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart1_xfer>;
};
&pinctrl {
pinctrl-names = "default";
pinctrl-0 = <&haikou_pin_hog>;
hog {
haikou_pin_hog: haikou-pin-hog {
rockchip,pins =
/* LID_BTN */
<RK_GPIO3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
/* BATLOW# */
<RK_GPIO0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
/* SLP_BTN# */
<RK_GPIO3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
/* BIOS_DISABLE# */
<RK_GPIO3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
leds {
led_sd_haikou: led-sd-gpio {
rockchip,pins =
<RK_GPIO0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sdmmc {
sdmmc_cd_gpio: sdmmc-cd-gpio {
rockchip,pins =
<RK_GPIO2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
|