path: root/arch/arm64/boot/dts/rockchip/rk3328-evb.dts

/*
 * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This library is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This library is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

/dts-v1/;
#include "rk3328.dtsi"
#include <dt-bindings/input/input.h>

/ {
	model = "Rockchip RK3328 EVB";
	compatible = "rockchip,rk3328-evb", "rockchip,rk3328";

	chosen {
		bootargs = "earlycon=uart8250,mmio32,0xff130000 swiotlb=1 kpti=0 console=ttyFIQ0 root=PARTUUID=614e0000-0000 rootwait coherent_pool=1m";
	};

	fiq-debugger {
		compatible = "rockchip,fiq-debugger";
		rockchip,serial-id = <2>;
		rockchip,signal-irq = <159>;
		rockchip,wake-irq = <0>;
		/* If enable uart uses irq instead of fiq */
		rockchip,irq-mode-enable = <0>;
		rockchip,baudrate = <1500000>;  /* Only 115200 and 1500000 */
		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
		status = "okay";
	};

	adc-keys {
		compatible = "adc-keys";
		io-channels = <&saradc 0>;
		io-channel-names = "buttons";
		poll-interval = <100>;
		keyup-threshold-microvolt = <1800000>;

		vol-up-key {
			linux,code = <KEY_VOLUMEUP>;
			label = "volume up";
			press-threshold-microvolt = <18000>;
		};
	};

	gmac_clkin: external-gmac-clock {
		compatible = "fixed-clock";
		clock-frequency = <125000000>;
		clock-output-names = "gmac_clkin";
		#clock-cells = <0>;
	};

	sdio_pwrseq: sdio-pwrseq {
		compatible = "mmc-pwrseq-simple";
		pinctrl-names = "default";
		pinctrl-0 = <&wifi_enable_h>;

		/*
		 * On the module itself this is one of these (depending
		 * on the actual card populated):
		 * - SDIO_RESET_L_WL_REG_ON
		 * - PDN (power down when low)
		 */
		reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
	};

	sound {
		compatible = "simple-audio-card";
		simple-audio-card,format = "i2s";
		simple-audio-card,mclk-fs = <256>;
		simple-audio-card,name = "rockchip,rk3328";
		simple-audio-card,cpu {
			sound-dai = <&i2s1>;
		};
		simple-audio-card,codec {
			sound-dai = <&codec>;
		};
	};

	hdmi-sound {
		compatible = "simple-audio-card";
		simple-audio-card,format = "i2s";
		simple-audio-card,mclk-fs = <128>;
		simple-audio-card,name = "rockchip,hdmi";
		simple-audio-card,cpu {
			sound-dai = <&i2s0>;
		};
		simple-audio-card,codec {
			sound-dai = <&hdmi>;
		};
	};

	spdif-sound {
		compatible = "simple-audio-card";
		simple-audio-card,name = "rockchip,spdif";
		simple-audio-card,cpu {
			sound-dai = <&spdif>;
		};
		simple-audio-card,codec {
			sound-dai = <&spdif_out>;
		};
	};

	spdif_out: spdif-out {
		compatible = "linux,spdif-dit";
		#sound-dai-cells = <0>;
	};

	vcc_host_vbus: host-vbus-regulator {
		compatible = "regulator-fixed";
		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&host_vbus_drv>;
		regulator-name = "vcc_host_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		enable-active-high;
	};

	vcc_otg_vbus: otg-vbus-regulator {
		compatible = "regulator-fixed";
		gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&otg_vbus_drv>;
		regulator-name = "vcc_otg_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		enable-active-high;
	};

	vcc_phy: vcc-phy-regulator {
		compatible = "regulator-fixed";
		regulator-name = "vcc_phy";
		regulator-always-on;
		regulator-boot-on;
	};

	vcc_sd: sdmmc-regulator {
		compatible = "regulator-fixed";
		gpio = <&gpio0 30 GPIO_ACTIVE_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&sdmmc0m1_gpio>;
		regulator-name = "vcc_sd";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vcc_io>;
	};

	xin32k: xin32k {
		compatible = "fixed-clock";
		clock-frequency = <32768>;
		clock-output-names = "xin32k";
		#clock-cells = <0>;
	};

	wireless-wlan {
		compatible = "wlan-platdata";
		rockchip,grf = <&grf>;
		wifi_chip_type = "ap6354";
		sdio_vref = <1800>;
		WIFI,host_wake_irq = <&gpio1 19 GPIO_ACTIVE_HIGH>;
		status = "okay";
	};
};

&codec {
	#sound-dai-cells = <0>;
	status = "okay";
};

&cpu0 {
	cpu-supply = <&vdd_arm>;
};

&dmc {
	center-supply = <&vdd_logic>;
	status = "okay";
};

&display_subsystem {
	status = "okay";
};

&emmc {
	bus-width = <8>;
	cap-mmc-highspeed;
	mmc-hs200-1_8v;
	supports-emmc;
	disable-wp;
	non-removable;
	num-slots = <1>;
	pinctrl-names = "default";
	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
	status = "okay";
};

&gmac2io {
	phy-supply = <&vcc_phy>;
	phy-mode = "rgmii";
	clock_in_out = "input";
	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
	snps,reset-active-low;
	snps,reset-delays-us = <0 10000 50000>;
	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
	pinctrl-names = "default";
	pinctrl-0 = <&rgmiim1_pins>;
	tx_delay = <0x26>;
	rx_delay = <0x11>;
	status = "disabled";
};

&gmac2phy {
	phy-supply = <&vcc_phy>;
	clock_in_out = "output";
	assigned-clocks = <&cru SCLK_MAC2PHY_SRC>;
	assigned-clock-rate = <50000000>;
	assigned-clocks = <&cru SCLK_MAC2PHY>;
	assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
	status = "okay";
};

&gpu {
	status = "okay";
	mali-supply = <&vdd_logic>;
};

&hdmi {
	#sound-dai-cells = <0>;
	ddc-i2c-scl-high-time-ns = <9625>;
	ddc-i2c-scl-low-time-ns = <10000>;
	status = "okay";
};

&hdmiphy {
	status = "okay";
};

&i2c1 {
	status = "okay";

	rk805: rk805@18 {
		compatible = "rockchip,rk805";
		status = "okay";
		reg = <0x18>;
		interrupt-parent = <&gpio2>;
		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&pmic_int_l>;
		rockchip,system-power-controller;
		wakeup-source;
		gpio-controller;
		#gpio-cells = <2>;
		#clock-cells = <1>;
		clock-output-names = "rk805-clkout1", "rk805-clkout2";

		rtc {
			status = "disabled";
		};

		pwrkey {
			status = "disabled";
		};

		gpio {
			status = "okay";
		};

		regulators {
			compatible = "rk805-regulator";
			status = "okay";
			#address-cells = <1>;
			#size-cells = <0>;

			vdd_logic: RK805_DCDC1 {
				regulator-compatible = "RK805_DCDC1";
				regulator-name = "vdd_logic";
				regulator-min-microvolt = <712500>;
				regulator-max-microvolt = <1450000>;
				regulator-initial-mode = <0x1>;
				regulator-ramp-delay = <12500>;
				regulator-boot-on;
				regulator-always-on;
				regulator-state-mem {
					regulator-mode = <0x2>;
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <1000000>;
				};
			};

			vdd_arm: RK805_DCDC2 {
				regulator-compatible = "RK805_DCDC2";
				regulator-name = "vdd_arm";
				regulator-min-microvolt = <712500>;
				regulator-max-microvolt = <1450000>;
				regulator-initial-mode = <0x1>;
				regulator-ramp-delay = <12500>;
				regulator-boot-on;
				regulator-always-on;
				regulator-state-mem {
					regulator-mode = <0x2>;
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <950000>;
				};
			};

			vcc_ddr: RK805_DCDC3 {
				regulator-compatible = "RK805_DCDC3";
				regulator-name = "vcc_ddr";
				regulator-initial-mode = <0x1>;
				regulator-boot-on;
				regulator-always-on;
				regulator-state-mem {
					regulator-mode = <0x2>;
					regulator-on-in-suspend;
				};
			};

			vcc_io: RK805_DCDC4 {
				regulator-compatible = "RK805_DCDC4";
				regulator-name = "vcc_io";
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-initial-mode = <0x1>;
				regulator-boot-on;
				regulator-always-on;
				regulator-state-mem {
					regulator-mode = <0x2>;
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <3300000>;
				};
			};

			vdd_18: RK805_LDO1 {
				regulator-compatible = "RK805_LDO1";
				regulator-name = "vdd_18";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-boot-on;
				regulator-always-on;
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <1800000>;
				};
			};

			vcc_18emmc: RK805_LDO2 {
				regulator-compatible = "RK805_LDO2";
				regulator-name = "vcc_18emmc";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-boot-on;
				regulator-always-on;
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <1800000>;
				};
			};

			vdd_11: RK805_LDO3 {
				regulator-compatible = "RK805_LDO3";
				regulator-name = "vdd_11";
				regulator-min-microvolt = <1100000>;
				regulator-max-microvolt = <1100000>;
				regulator-boot-on;
				regulator-always-on;
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <1100000>;
				};
			};
		};
	};
};

&h265e {
	status = "okay";
};

&i2s0 {
	#sound-dai-cells = <0>;
	rockchip,bclk-fs = <128>;
	status = "okay";
};

&i2s1 {
	#sound-dai-cells = <0>;
	status = "okay";
};

&io_domains {
	status = "okay";

	vccio1-supply = <&vcc_io>;
	vccio2-supply = <&vcc_18emmc>;
	vccio3-supply = <&vcc_io>;
	vccio4-supply = <&vdd_18>;
	vccio5-supply = <&vcc_io>;
	vccio6-supply = <&vcc_io>;
	pmuio-supply = <&vcc_io>;
};

&pinctrl {
	pmic {
		pmic_int_l: pmic-int-l {
		rockchip,pins =
			<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;	/* gpio2_a6 */
		};
	};

	sdio-pwrseq {
		wifi_enable_h: wifi-enable-h {
		rockchip,pins =
			<1 18 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	usb {
		host_vbus_drv: host-vbus-drv {
			rockchip,pins =
				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		otg_vbus_drv: otg-vbus-drv {
			rockchip,pins =
				<0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};
};

&pwm3 {
	status = "okay";
	compatible = "rockchip,remotectl-pwm";
	pinctrl-names = "default";
	pinctrl-0 = <&pwmir_pin>;
	remote_pwm_id = <3>;
	handle_cpu_id = <1>;
	remote_support_psci = <1>;

	ir_key1 {
		rockchip,usercode = <0x4040>;
		rockchip,key_table =
			<0xf2	KEY_REPLY>,
			<0xba	KEY_BACK>,
			<0xf4	KEY_UP>,
			<0xf1	KEY_DOWN>,
			<0xef	KEY_LEFT>,
			<0xee	KEY_RIGHT>,
			<0xbd	KEY_HOME>,
			<0xea	KEY_VOLUMEUP>,
			<0xe3	KEY_VOLUMEDOWN>,
			<0xe2	KEY_SEARCH>,
			<0xb2	KEY_POWER>,
			<0xbc	KEY_MUTE>,
			<0xec	KEY_MENU>,
			<0xbf	0x190>,
			<0xe0	0x191>,
			<0xe1	0x192>,
			<0xe9	183>,
			<0xe6	248>,
			<0xe8	185>,
			<0xe7	186>,
			<0xf0	388>,
			<0xbe	0x175>;
	};

	ir_key2 {
		rockchip,usercode = <0xff00>;
		rockchip,key_table =
			<0x39	KEY_POWER>,
			<0x73	KEY_MUTE>,
			<0xa4	KEY_PLAYPAUSE>,
			<0x75	KEY_VOLUMEDOWN>,
			<0x77	KEY_VOLUMEUP>,
			<0x7d	KEY_MENU>,
			<0xf9	KEY_HOME>,
			<0x5f	KEY_BACK>,
			<0xb9	KEY_UP>,
			<0xe9	KEY_DOWN>,
			<0xb8	KEY_LEFT>,
			<0xea	KEY_RIGHT>,
			<0xaa	KEY_REPLY>,
			<0x55	KEY_1>,
			<0x5b	KEY_2>,
			<0xf8	KEY_3>,
			<0x57	KEY_4>,
			<0xed	KEY_5>,
			<0xee	KEY_6>,
			<0x59	KEY_7>,
			<0xf1	KEY_8>,
			<0xf2	KEY_9>,
			<0xe0	KEY_BACKSPACE>,
			<0x79	KEY_0>,
			<0xa4	KEY_SETUP>;
	};

	ir_key3 {
		rockchip,usercode = <0x1dcc>;
		rockchip,key_table =
			<0xee	KEY_REPLY>,
			<0xf0	KEY_BACK>,
			<0xf8	KEY_UP>,
			<0xbb	KEY_DOWN>,
			<0xef	KEY_LEFT>,
			<0xed	KEY_RIGHT>,
			<0xfc	KEY_HOME>,
			<0xf1	KEY_VOLUMEUP>,
			<0xfd	KEY_VOLUMEDOWN>,
			<0xb7	KEY_SEARCH>,
			<0xff	KEY_POWER>,
			<0xf3	KEY_MUTE>,
			<0xbf	KEY_MENU>,
			<0xf9	0x191>,
			<0xf5	0x192>,
			<0xb3	388>,
			<0xbe	KEY_1>,
			<0xba	KEY_2>,
			<0xb2	KEY_3>,
			<0xbd	KEY_4>,
			<0xf9	KEY_5>,
			<0xb1	KEY_6>,
			<0xfc	KEY_7>,
			<0xf8	KEY_8>,
			<0xb0	KEY_9>,
			<0xb6	KEY_0>,
			<0xb5	KEY_BACKSPACE>;
	};
};

&rga {
	status = "okay";
};

&rkvdec {
	vcodec-supply = <&vdd_logic>;
	status = "okay";
};

&rockchip_suspend {
	status = "okay";
	rockchip,virtual-poweroff = <1>;
};

&saradc {
	status = "okay";
	vref-supply = <&vdd_18>;
};

&sdio {
	bus-width = <4>;
	cap-sd-highspeed;
	cap-sdio-irq;
	disable-wp;
	keep-power-in-suspend;
	max-frequency = <150000000>;
	mmc-pwrseq = <&sdio_pwrseq>;
	non-removable;
	num-slots = <1>;
	pinctrl-names = "default";
	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
	supports-sdio;
	status = "okay";
};

&sdmmc {
	bus-width = <4>;
	cap-mmc-highspeed;
	cap-sd-highspeed;
	disable-wp;
	max-frequency = <150000000>;
	num-slots = <1>;
	pinctrl-names = "default";
	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
	supports-sd;
	status = "okay";
	vmmc-supply = <&vcc_sd>;
};

&spdif {
	#sound-dai-cells = <0>;
	status = "okay";
};

&tsadc {
	status = "okay";
};

&u2phy {
	status = "okay";

	u2phy_host: host-port {
		status = "okay";
	};

	u2phy_otg: otg-port {
		vbus-supply = <&vcc_otg_vbus>;
		status = "okay";
	};
};

&u3phy {
	vbus-supply = <&vcc_host_vbus>;
	status = "okay";
};

&u3phy_utmi {
	status = "okay";
};

&u3phy_pipe {
	status = "okay";
};

&usb20_otg {
	status = "okay";
};

&usb_host0_ehci {
	status = "okay";
};

&usb_host0_ohci {
	status = "okay";
};

&usbdrd3 {
	status = "okay";
};

&usbdrd_dwc3 {
	status = "okay";
};

&vepu {
	status = "okay";
};

&vop {
	status = "okay";
};

&vop_mmu {
	status = "okay";
};

&vpu_service {
	status = "okay";
};