/* * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a * whole. * * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following * conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "rk3399.dtsi" #include "rk3399-android-6.0.dtsi" #include "rk3399-opp.dtsi" #include #include / { compatible = "rockchip,rk3399-mid", "rockchip,rk3399"; hall_sensor: hall-mh248 { compatible = "hall-mh248"; pinctrl-names = "default"; pinctrl-0 = <&mh248_irq_gpio>; irq-gpio = <&gpio1 2 IRQ_TYPE_EDGE_BOTH>; hall-active = <1>; status = "okay"; }; vcc_sys: vcc-sys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3900000>; regulator-max-microvolt = <3900000>; }; vcc3v3_sys: vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc5v0_host"; regulator-always-on; }; vdd_log: vdd-log { compatible = "pwm-regulator"; pwms = <&pwm2 0 25000 1>; rockchip,pwm_id= <2>; rockchip,pwm_voltage = <900000>; regulator-name = "vdd_log"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; }; xin32k: xin32k { compatible = "fixed-clock"; clock-frequency = <32768>; clock-output-names = "xin32k"; #clock-cells = <0>; }; backlight: backlight { compatible = "pwm-backlight"; pwms = <&vop0_pwm 0 25000 PWM_POLARITY_INVERTED>; brightness-levels = < 0 1 51 52 52 53 53 54 54 55 55 56 56 57 57 58 58 59 59 60 61 61 62 63 63 64 65 65 66 67 67 68 69 69 70 71 71 72 73 73 74 75 75 76 77 77 78 79 79 80 80 81 81 82 83 83 84 85 86 86 87 88 89 89 90 91 92 92 93 94 95 95 96 97 98 98 99 100 101 101 102 103 104 104 105 106 107 107 108 109 110 110 111 112 113 113 114 115 116 116 117 118 119 119 120 121 122 122 123 124 125 125 126 127 128 128 129 130 131 131 132 133 134 134 135 136 137 137 138 139 140 140 141 142 143 143 144 145 146 146 147 148 149 149 150 151 152 152 153 154 155 155 156 157 158 158 159 160 161 161 162 163 164 164 165 166 167 167 168 169 170 170 171 172 173 173 174 175 176 176 177 178 179 179 180 181 182 182 183 184 185 185 186 187 188 188 189 190 191 191 216 217 218 218 219 220 221 221 222 223 224 224 225 226 227 227 228 229 230 230 231 232 233 233 234 235 236 236 237 238 239 239 240 241 242 242 243 244 245 245 246 247 248 248 249 250 251 251 252 253 254 254 255 255 255 255>; default-brightness-level = <200>; enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; }; vcc_phy: vcc-phy-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_phy"; regulator-always-on; regulator-boot-on; }; es8316-sound { compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; simple-audio-card,name = "rockchip,es8316-codec"; simple-audio-card,mclk-fs = <256>; simple-audio-card,widgets = "Microphone", "Mic Jack", "Headphone", "Headphone Jack"; simple-audio-card,routing = "Mic Jack", "MICBIAS1", "IN1P", "Mic Jack", "Headphone Jack", "HPOL", "Headphone Jack", "HPOR"; simple-audio-card,cpu { sound-dai = <&i2s0>; }; simple-audio-card,codec { sound-dai = <&es8316>; }; }; spdif-sound { compatible = "simple-audio-card"; simple-audio-card,name = "rockchip,spdif"; simple-audio-card,cpu { sound-dai = <&spdif>; }; simple-audio-card,codec { sound-dai = <&spdif_out>; }; }; spdif_out: spdif-out { compatible = "linux,spdif-dit"; #sound-dai-cells = <0>; }; sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rk818 1>; clock-names = "ext_clock"; pinctrl-names = "default"; pinctrl-0 = <&wifi_enable_h>; /* * On the module itself this is one of these (depending * on the actual card populated): * - SDIO_RESET_L_WL_REG_ON * - PDN (power down when low) */ reset-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; /* GPIO0_B2 */ }; wireless-wlan { compatible = "wlan-platdata"; rockchip,grf = <&grf>; wifi_chip_type = "ap6354"; sdio_vref = <1800>; WIFI,host_wake_irq = <&gpio0 3 GPIO_ACTIVE_HIGH>; /* GPIO0_a3 */ status = "okay"; }; wireless-bluetooth { compatible = "bluetooth-platdata"; clocks = <&rk818 1>; clock-names = "ext_clock"; //wifi-bt-power-toggle; uart_rts_gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; /* GPIO2_C3 */ pinctrl-names = "default", "rts_gpio"; pinctrl-0 = <&uart0_rts>; pinctrl-1 = <&uart0_gpios>; //BT,power_gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; /* GPIOx_xx */ BT,reset_gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; /* GPIO0_B1 */ BT,wake_gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>; /* GPIO2_D2 */ BT,wake_host_irq = <&gpio0 4 GPIO_ACTIVE_HIGH>; /* GPIO0_A4 */ status = "okay"; }; uboot-charge { compatible = "rockchip,uboot-charge"; rockchip,uboot-charge-on = <0>; rockchip,android-charge-on = <1>; }; vibrator { compatible = "rk-vibrator-gpio"; vibrator-gpio = <&gpio4 30 GPIO_ACTIVE_LOW>; status = "okay"; }; rk_headset { compatible = "rockchip_headset"; headset_gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hp_det>; io-channels = <&saradc 2>; }; }; &rk_key { compatible = "rockchip,key"; status = "okay"; io-channels = <&saradc 1>; vol-up-key { linux,code = <114>; label = "volume up"; rockchip,adc_value = <1>; }; vol-down-key { linux,code = <115>; label = "volume down"; rockchip,adc_value = <170>; }; power-key { gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; linux,code = <116>; label = "power"; gpio-key,wakeup; }; menu-key { linux,code = <59>; label = "menu"; rockchip,adc_value = <746>; }; home-key { linux,code = <102>; label = "home"; rockchip,adc_value = <355>; }; back-key { linux,code = <158>; label = "back"; rockchip,adc_value = <560>; }; camera-key { linux,code = <212>; label = "camera"; rockchip,adc_value = <450>; }; }; &sdmmc { clock-frequency = <50000000>; clock-freq-min-max = <400000 150000000>; supports-sd; bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; disable-wp; num-slots = <1>; //sd-uhs-sdr104; vqmmc-supply = <&vcc_sd>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; status = "okay"; }; &sdio0 { clock-frequency = <150000000>; clock-freq-min-max = <200000 150000000>; supports-sdio; bus-width = <4>; disable-wp; cap-sd-highspeed; cap-sdio-irq; keep-power-in-suspend; mmc-pwrseq = <&sdio_pwrseq>; non-removable; num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; sd-uhs-sdr104; status = "okay"; }; &emmc_phy { status = "okay"; }; &sdhci { bus-width = <8>; mmc-hs400-1_8v; supports-emmc; non-removable; keep-power-in-suspend; mmc-hs400-enhanced-strobe; status = "okay"; }; &i2s0 { status = "okay"; rockchip,i2s-broken-burst-len; rockchip,playback-channels = <8>; rockchip,capture-channels = <8>; #sound-dai-cells = <0>; }; &i2s2 { #sound-dai-cells = <0>; }; &io_domains { status = "okay"; bt656-supply = <&vcc1v8_dvp>; audio-supply = <&vcca1v8_codec>; sdmmc-supply = <&vcc_sd>; gpio1830-supply = <&vcc_3v0>; }; &spdif { status = "okay"; #sound-dai-cells = <0>; }; &i2c0 { status = "okay"; i2c-scl-rising-time-ns = <180>; i2c-scl-falling-time-ns = <30>; clock-frequency = <400000>; vdd_cpu_b: syr837@40 { compatible = "silergy,syr827"; reg = <0x40>; vin-supply = <&vcc_sys>; regulator-compatible = "fan53555-reg"; pinctrl-0 = <&vsel1_gpio>; vsel-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; regulator-ramp-delay = <1000>; fcs,suspend-voltage-selector = <1>; regulator-always-on; regulator-initial-state = <3>; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_gpu: syr828@41 { compatible = "silergy,syr828"; status = "okay"; reg = <0x41>; vin-supply = <&vcc_sys>; regulator-compatible = "fan53555-reg"; pinctrl-0 = <&vsel2_gpio>; vsel-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <735000>; regulator-max-microvolt = <1400000>; regulator-ramp-delay = <1000>; fcs,suspend-voltage-selector = <1>; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; rk818: pmic@1c { compatible = "rockchip,rk818"; status = "okay"; reg = <0x1c>; clock-output-names = "rk818-clkout1", "wifibt_32kin"; interrupt-parent = <&gpio1>; interrupts = <21 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; rockchip,system-power-controller; rk818,support_dc_chg = <1>;/*1: dc chg; 0:usb chg*/ wakeup-source; extcon = <&fusb0>; #clock-cells = <1>; vcc1-supply = <&vcc_sys>; vcc2-supply = <&vcc_sys>; vcc3-supply = <&vcc_sys>; vcc4-supply = <&vcc_sys>; vcc6-supply = <&vcc_sys>; vcc7-supply = <&vcc3v3_sys>; vcc8-supply = <&vcc_sys>; vcc9-supply = <&vcc3v3_sys>; regulators { vdd_cpu_l: DCDC_REG1 { regulator-name = "vdd_cpu_l"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <750000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <6001>; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_center: DCDC_REG2 { regulator-name = "vdd_center"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <6001>; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_ddr: DCDC_REG3 { regulator-name = "vcc_ddr"; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; }; }; vcc_1v8: DCDC_REG4 { regulator-name = "vcc_1v8"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; vcca3v0_codec: LDO_REG1 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcca3v0_codec"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v0_tp: LDO_REG2 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc3v0_tp"; regulator-state-mem { regulator-off-in-suspend; }; }; vcca1v8_codec: LDO_REG3 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcca1v8_codec"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_power_on: LDO_REG4 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc_power_on"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3300000>; }; }; vcc_3v0: LDO_REG5 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc_3v0"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3000000>; }; }; vcc_1v5: LDO_REG6 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; regulator-name = "vcc_1v5"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1500000>; }; }; vcc1v8_dvp: LDO_REG7 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcc1v8_dvp"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_s3: LDO_REG8 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc3v3_s3"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_sd: LDO_REG9 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc_sd"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3000000>; }; }; vcc3v3_s0: SWITCH_REG { regulator-always-on; regulator-boot-on; regulator-name = "vcc3v3_s0"; regulator-state-mem { regulator-on-in-suspend; }; }; }; battery { compatible = "rk818-battery"; ocv_table = <3400 3675 3689 3716 3740 3756 3768 3780 3793 3807 3827 3853 3896 3937 3974 4007 4066 4110 4161 4217 4308>; design_capacity = <7916>; design_qmax = <8708>; bat_res = <65>; max_input_current = <3000>; max_chrg_current = <3000>; max_chrg_voltage = <4350>; sleep_enter_current = <300>; sleep_exit_current = <300>; power_off_thresd = <3400>; zero_algorithm_vol = <3950>; fb_temperature = <105>; sample_res = <20>; max_soc_offset = <60>; energy_mode = <0>; monitor_sec = <5>; virtual_power = <0>; power_dc2otg = <0>; }; }; }; &i2c1 { status = "okay"; i2c-scl-rising-time-ns = <140>; i2c-scl-falling-time-ns = <30>; es8316: es8316@10 { #sound-dai-cells = <0>; compatible = "everest,es8316"; reg = <0x11>; clocks = <&cru SCLK_I2S_8CH_OUT>; clock-names = "mclk"; pinctrl-names = "default"; pinctrl-0 = <&i2s_8ch_mclk>; spk-con-gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; }; }; &i2c4 { status = "okay"; i2c-scl-rising-time-ns = <345>; i2c-scl-falling-time-ns = <11>; clock-frequency = <400000>; lsm330_accel@1e { status = "okay"; compatible = "lsm330_acc"; pinctrl-names = "default"; pinctrl-0 = <&lsm330a_irq_gpio>; reg = <0x1e>; irq-gpio = <&gpio2 27 IRQ_TYPE_EDGE_RISING>; type = ; irq_enable = <1>; poll_delay_ms = <30>; power-off-in-suspend = <1>; layout = <4>; }; lsm330_gyro@6a { status = "okay"; compatible = "lsm330_gyro"; pinctrl-names = "default"; pinctrl-0 = <&lsm330g_irq_gpio>; reg = <0x6a>; irq-gpio = <&gpio1 20 IRQ_TYPE_EDGE_RISING>; type = ; irq_enable = <0>; power-off-in-suspend = <1>; poll_delay_ms = <30>; }; mpu6500@68 { status = "disabled"; compatible = "invensense,mpu6500"; pinctrl-names = "default"; pinctrl-0 = <&mpu6500_irq_gpio>; reg = <0x68>; irq-gpio = <&gpio2 27 IRQ_TYPE_EDGE_RISING>; mpu-int_config = <0x10>; mpu-level_shifter = <0>; mpu-orientation = <1 0 0 0 1 0 0 0 1>; orientation-x= <1>; orientation-y= <1>; orientation-z= <0>; support-hw-poweroff = <1>; mpu-debug = <1>; }; sensor@0d { status = "okay"; compatible = "ak8963"; pinctrl-names = "default"; pinctrl-0 = <&ak8963_irq_gpio>; reg = <0x0d>; type = ; irq-gpio = <&gpio2 28 IRQ_TYPE_EDGE_RISING>; irq_enable = <0>; poll_delay_ms = <30>; layout = <3>; }; sensor@10 { status = "okay"; compatible = "capella,light_cm3218"; pinctrl-names = "default"; pinctrl-0 = <&cm3218_irq_gpio>; reg = <0x10>; type = ; irq-gpio = <&gpio4 24 IRQ_TYPE_EDGE_FALLING>; irq_enable = <1>; poll_delay_ms = <30>; }; fusb0: fusb30x@22 { compatible = "fairchild,fusb302"; reg = <0x22>; pinctrl-names = "default"; pinctrl-0 = <&fusb0_int>; int-n-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; &i2c5 { status = "okay"; i2c-scl-rising-time-ns = <150>; i2c-scl-falling-time-ns = <30>; clock-frequency = <400000>; gt9xx: gt9xx@14 { compatible = "goodix,gt9xx"; reg = <0x14>; touch-gpio = <&gpio3 12 IRQ_TYPE_LEVEL_LOW>; reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>; max-x = <1536>; max-y = <2048>; tp-size = <970>; tp-supply = <&vcc3v0_tp>; }; }; &isp0 { status = "okay"; }; &isp1 { status = "okay"; }; &cpu_l0 { cpu-supply = <&vdd_cpu_l>; }; &cpu_l1 { cpu-supply = <&vdd_cpu_l>; }; &cpu_l2 { cpu-supply = <&vdd_cpu_l>; }; &cpu_l3 { cpu-supply = <&vdd_cpu_l>; }; &cpu_b0 { cpu-supply = <&vdd_cpu_b>; }; &cpu_b1 { cpu-supply = <&vdd_cpu_b>; }; &gpu { status = "okay"; mali-supply = <&vdd_gpu>; }; &spi1 { status = "disabled"; max-freq = <50000000>; mpu6500@0 { status = "disabled"; compatible = "inv-spi,mpu6500"; pinctrl-names = "default"; pinctrl-0 = <&mpu6500_irq_gpio>; irq-gpio = <&gpio2 27 IRQ_TYPE_EDGE_RISING>; reg = <0>; spi-max-frequency = <1000000>; spi-cpha; spi-cpol; mpu-int_config = <0x00>; mpu-level_shifter = <0>; mpu-orientation = <1 0 0 0 1 0 0 0 1>; orientation-x= <1>; orientation-y= <0>; orientation-z= <1>; support-hw-poweroff = <1>; mpu-debug = <1>; }; }; &tcphy0 { extcon = <&fusb0>; status = "okay"; }; &tsadc { rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ status = "okay"; }; &u2phy0 { status = "okay"; extcon = <&fusb0>; u2phy0_otg: otg-port { status = "okay"; }; u2phy0_host: host-port { phy-supply = <&vcc5v0_host>; status = "okay"; }; }; &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer &uart0_cts>; status = "okay"; }; &usb_host0_ehci { status = "okay"; }; &usb_host0_ohci { status = "okay"; }; &usbdrd3_0 { extcon = <&fusb0>; status = "okay"; }; &usbdrd_dwc3_0 { status = "okay"; }; &vop0_pwm { assigned-clocks = <&cru SCLK_VOP0_PWM>; assigned-clock-rates = <50000000>; status = "okay"; }; &pwm2 { status = "okay"; }; &saradc { status = "okay"; }; &rockchip_suspend { status = "okay"; rockchip,sleep-debug-en = <1>; rockchip,sleep-mode-config = < (0 | RKPM_SLP_ARMPD | RKPM_SLP_PERILPPD | RKPM_SLP_DDR_RET | RKPM_SLP_PLLPD | RKPM_SLP_CENTER_PD | RKPM_SLP_AP_PWROFF ) >; rockchip,wakeup-config = < (0 | RKPM_GPIO_WKUP_EN | RKPM_PWM_WKUP_EN ) >; rockchip,pwm-regulator-config = < (0 | PWM2_REGULATOR_EN ) >; rockchip,power-ctrl = <&gpio1 17 GPIO_ACTIVE_HIGH>, <&gpio1 14 GPIO_ACTIVE_HIGH>; }; &pinctrl { sdio-pwrseq { wifi_enable_h: wifi-enable-h { rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>; }; }; wireless-bluetooth { uart0_gpios: uart0-gpios { rockchip,pins = <2 19 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { pmic_int_l: pmic-int-l { rockchip,pins = <1 21 RK_FUNC_GPIO &pcfg_pull_up>; }; pmic_dvs2: pmic-dvs2 { rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_down>; }; vsel1_gpio: vsel1-gpio { rockchip,pins = <1 17 RK_FUNC_GPIO &pcfg_pull_down>; }; vsel2_gpio: vsel2-gpio { rockchip,pins = <1 14 RK_FUNC_GPIO &pcfg_pull_down>; }; }; hallsensor { mh248_irq_gpio: mh248-irq-gpio { rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; headphone { hp_det: hp-det { rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_up>; }; }; lcdpwr-enable { lcdpwr_enable_h: lcdpwr-enable-h { rockchip,pins = <3 8 RK_FUNC_GPIO &pcfg_pull_up>; }; }; lsm330_a { lsm330a_irq_gpio: lsm330a-irq-gpio { rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>; }; }; lsm330_g { lsm330g_irq_gpio: lsm330g-irq-gpio { rockchip,pins = <1 20 RK_FUNC_GPIO &pcfg_pull_none>; }; }; mpu6500 { mpu6500_irq_gpio: mpu6500-irq-gpio { rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>; }; }; ak8963 { ak8963_irq_gpio: ak8963-irq-gpio { rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_none>; }; }; cm3218 { cm3218_irq_gpio: cm3218-irq-gpio { rockchip,pins = <4 24 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usb2 { host_vbus_drv: host-vbus-drv { rockchip,pins = <4 25 RK_FUNC_GPIO &pcfg_pull_none>; }; }; fusb30x { fusb0_int: fusb0-int { rockchip,pins = <1 1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; &rk_screen { #include }; &cdn_dp_sound { status = "okay"; }; &cdn_dp_fb { status = "okay"; extcon = <&fusb0>; phys = <&tcphy0_dp>; dp_vop_sel = ; }; &vopb_rk_fb { status = "okay"; rockchip,cabc_mode = <1>; power_ctr: power_ctr { rockchip,debug = <0>; lcd_en: lcd-en { rockchip,power_type = ; pinctrl-names = "default"; pinctrl-0 = <&lcdpwr_enable_h>; gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; rockchip,delay = <10>; }; }; }; &vopl_rk_fb { status = "okay"; }; &edp_rk_fb { status = "okay"; }; &pvtm { status = "okay"; }; &pmu_pvtm { status = "okay"; }; &pmu_io_domains { status = "okay"; pmu1830-supply = <&vcc_1v8>; };