summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2007-06-28[NETPOLL] netconsole: fix soft lockup when removing moduleJarek Poplawski
#1 Until kernel ver. 2.6.21 (including) cancel_rearming_delayed_work() required a work function should always (unconditionally) rearm with delay > 0 - otherwise it would endlessly loop. This patch replaces this function with cancel_delayed_work(). Later kernel versions don't require this, so here it's only for uniformity. #2 After deleting a timer in cancel_[rearming_]delayed_work() there could stay a last skb queued in npinfo->txq causing a memory leak after kfree(npinfo). Initial patch & testing by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Jarek Poplawski <jarkao2@o2.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-28Merge master.kernel.org:/pub/scm/linux/kernel/git/vxy/lksctp-devDavid S. Miller
2007-06-27[NETPOLL]: tx lock deadlock fixStephen Hemminger
If sky2 device poll routine is called from netpoll_send_skb, it would deadlock. The netpoll_send_skb held the netif_tx_lock, and the poll routine could acquire it to clean up skb's. Other drivers might use same locking model. The driver is correct, netpoll should not introduce more locking problems than it causes already. So change the code to drop lock before calling poll handler. Signed-off-by: Stephen Hemminger <shemminger@linux.foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-26SCTP: lock_sock_nested in sctp_sock_migrateZach Brown
sctp_sock_migrate() grabs the socket lock on a newly allocated socket while holding the socket lock on an old socket. lockdep worries that this might be a recursive lock attempt. task/3026 is trying to acquire lock: (sk_lock-AF_INET){--..}, at: [<ffffffff88105b8c>] sctp_sock_migrate+0x2e3/0x327 [sctp] but task is already holding lock: (sk_lock-AF_INET){--..}, at: [<ffffffff8810891f>] sctp_accept+0xdf/0x1e3 [sctp] This patch tells lockdep that this locking is safe by using lock_sock_nested(). Signed-off-by: Zach Brown <zach.brown@oracle.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-06-23[NET]: Make skb_seq_read unmap the last fragmentOlaf Kirch
Having walked through the entire skbuff, skb_seq_read would leave the last fragment mapped. As a consequence, the unwary caller would leak kmaps, and proceed with preempt_count off by one. The only (kind of non-intuitive) workaround is to use skb_seq_read_abort. This patch makes sure skb_seq_read always unmaps frag_data after having cycled through the skb's paged part. Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-23[NET]: Re-enable irqs before pushing pending DMA requestsShannon Nelson
This moves the local_irq_enable() call in net_rx_action() to before calling the CONFIG_NET_DMA's dma_async_memcpy_issue_pending() rather than after. This shortens the irq disabled window and allows for DMA drivers that need to do their own irq hold. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-23[TCP] tcp_read_sock: Allow recv_actor() return return negative error value.Jens Axboe
tcp_read_sock() currently assumes that the recv_actor() only returns number of bytes copied. For network splice receive, we may have to return an error in some cases. So allow the actor to return a negative error value. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-23[TIPC]: Fix infinite loop in netlink handlerFlorian Westphal
The tipc netlink config handler uses the nlmsg_pid from the request header as destination for its reply. If the application initialized nlmsg_pid to 0, the reply is looped back to the kernel, causing hangup. Fix: use nlmsg_pid of the skb that triggered the request. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-23[SKBUFF]: Fix incorrect config #ifdef around skb_copy_secmarkPatrick McHardy
secmark doesn't depend on CONFIG_NET_SCHED. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-22[IPV6] NDISC: Fix thinko to control Router Preference support.YOSHIFUJI Hideaki
Bug reported by Haruhito Watanabe <haruhito@sfc.keio.ac.jp>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-22[NETFILTER]: nfctnetlink: Don't allow to change helperYasuyuki Kozakai
There is no realistic situation to change helper (Who wants IRC helper to track FTP traffic ?). Moreover, if we want to do that, we need to fix race issue by nfctnetlink and running helper. That will add overhead to packet processing. It wouldn't pay. So this rejects the request to change helper. The requests to add or remove helper are accepted as ever. Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-22[NETFILTER]: nf_conntrack_sip: add missing message types containing RTP infoJerome Borsboom
Signed-off-by: Jerome Borsboom <j.borsboom@erasmusmc.nl> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-19SCTP: Fix sctp_getsockopt_get_peer_addrsNeil Horman
This is the split out of the patch that we agreed I should split out from my last patch. It changes space_left to be computed in the same way the to variable is. I know we talked about changing space_left to an int, but I think size_t is more appropriate, since we should never have negative space in our buffer, and computing using offsetof means space_left should now never drop below zero. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-06-19SCTP: update sctp_getsockopt helpers to allow oversized buffersNeil Horman
I noted the other day while looking at a bug that was ostensibly in some perl networking library, that we strictly avoid allowing getsockopt operations to complete if we pass in oversized buffers. This seems to make libraries like Perl::NET malfunction since it seems to allocate oversized buffers for use in several operations. It also seems to be out of line with the way udp, tcp and ip getsockopt routines handle buffer input (since the *optlen pointer in both an input and an output and gets set to the length of the data that we copy into the buffer). This patch brings our getsockopt helpers into line with other protocols, and allows us to accept oversized buffers for our getsockopt operations. Tested by me with good results. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-06-18[AF_RXRPC]: Return the number of bytes buffered in rxrpc_send_data()David Howells
Return the number of bytes buffered in rxrpc_send_data(). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-18[IPVS]: Fix state variable on failure to start ipvs threadsNeil Horman
ip_vs currently fails to reset its ip_vs_sync_state variable if the sync thread fails to start properly. The result is that the kernel will report a running daemon when their actuall is none. If you issue the following commands: 1. ipvsadm --start-daemon master --mcast-interface bla 2. ipvsadm -L --daemon 3. ipvsadm --stop-daemon master Assuming that bla is not an actual interface, step 2 should return no data, but instead returns: $ ipvsadm -L --daemon master sync daemon (mcast=bla, syncid=0) Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-18[XFRM]: Fix MTU calculation for non-ESP SAsPatrick McHardy
My IPsec MTU optimization patch introduced a regression in MTU calculation for non-ESP SAs, the SA's header_len needs to be subtracted from the MTU if the transform doesn't provide a ->get_mtu() function. Reported-and-tested-by: Marco Berizzi <pupilla@hotmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-15[RXRPC] net/rxrpc/ar-connection.c: fix NULL dereferenceAdrian Bunk
This patch fixes a NULL dereference spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-15[TCP]: Fix logic breakage due to DSACK separationIlpo Järvinen
Commit 6f74651ae626ec672028587bc700538076dfbefb is found guilty of breaking DSACK counting, which should be done only for the SACK block reported by the DSACK instead of every SACK block that is received along with DSACK information. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-15[TCP]: Congestion control API RTT sampling fixIlpo Järvinen
Commit 164891aadf1721fca4dce473bb0e0998181537c6 broke RTT sampling of congestion control modules. Inaccurate timestamps could be fed to them without providing any way for them to identify such cases. Previously RTT sampler was called only if FLAG_RETRANS_DATA_ACKED was not set filtering inaccurate timestamps nicely. In addition, the new behavior could give an invalid timestamp (zero) to RTT sampler if only skbs with TCPCB_RETRANS were ACKed. This solves both problems. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-14Merge master.kernel.org:/pub/scm/linux/kernel/git/vxy/lksctp-devDavid S. Miller
2007-06-14[IPV6] addrconf: Fix IPv6 on tuntap tunnelsHerbert Xu
The recent patch that added ipv6_hwtype is broken on tuntap tunnels. Indeed, it's broken on any device that does not pass the ipv6_hwtype test. The reason is that the original test only applies to autoconfiguration, not IPv6 support. IPv6 support is allowed on any device. In fact, even with the ipv6_hwtype patch applied you can still add IPv6 addresses to any interface that doesn't pass thw ipv6_hwtype test provided that they have a sufficiently large MTU. This is a serious problem because come deregistration time these devices won't be cleaned up properly. I've gone back and looked at the rationale for the patch. It appears that the real problem is that we were creating IPv6 devices even if the MTU was too small. So here's a patch which fixes that and reverts the ipv6_hwtype stuff. Thanks to Kanru Chen for reporting this issue. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-14[TCP]: Add missing break to TCP option parsing codeIlpo Järvinen
This flaw does not affect any behavior (currently). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-13[SCTP] Don't disable PMTU discovery when mtu is smallVlad Yasevich
Right now, when we receive a mtu estimate smaller then minim threshold in the ICMP message, we disable the path mtu discovery on the transport. This leads to the never increasing sctp fragmentation point even when the real path mtu has increased. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-06-13[SCTP] Flag a pmtu change requestVlad Yasevich
Currently, if the socket is owned by the user, we drop the ICMP message. As a result SCTP forgets that path MTU changed and never adjusting it's estimate. This causes all subsequent packets to be fragmented. With this patch, we'll flag the association that it needs to udpate it's estimate based on the already updated routing information. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Acked-by: Sridhar Samudrala <sri@us.ibm.com>
2007-06-13[SCTP] Update pmtu handling to be similar to tcpVlad Yasevich
Introduce new function sctp_transport_update_pmtu that updates the transports and destination caches view of the path mtu. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Acked-by: Sridhar Samudrala <sri@us.ibm.com>
2007-06-13[SCTP] Fix leak in sctp_getsockopt_local_addrs when copy_to_user failsVlad Yasevich
If the copy_to_user or copy_user calls fail in sctp_getsockopt_local_addrs(), the function should free locally allocated storage before returning error. Spotted by Coverity. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Acked-by: Sridhar Samudrala <sri@us.ibm.com>
2007-06-13[SCTP]: Allow unspecified port in sctp_bindx()Vlad Yasevich
Allow sctp_bindx() to accept multiple address with unspecified port. In this case, all addresses inherit the first bound port. We still catch full mis-matches. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Acked-by: Sridhar Samudrala <sri@us.ibm.com>
2007-06-13[SCTP]: Correctly set daddr for IPv6 sockets during peeloffVlad Yasevich
During peeloff of AF_INET6 socket, the inet6_sk(sk)->daddr wasn't set correctly since the code was assuming IPv4 only. Now we use a correct call to set the destination address. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Acked-by: Sridhar Samudrala <sri@us.ibm.com>
2007-06-13[TCP]: Set initial_ssthresh default to zero in Cubic and BIC.David S. Miller
Because of the current default of 100, Cubic and BIC perform very poorly compared to standard Reno. In the worst case, this change makes Cubic and BIC as aggressive as Reno. So this change should be very safe. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-12[TCP]: Fix left_out setting during FRTOIlpo Järvinen
Without FRTO, the tcp_try_to_open is never called with lost_out > 0 (see tcp_time_to_recover). However, when FRTO is enabled, the !tp->lost condition is not used until end of FRTO because that way TCP avoids premature entry to fast recovery during FRTO. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-12[TCP]: Disable TSO if MD5SIG is enabled.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-12Merge branch 'mac80211-fixes' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2007-06-11[PATCH] mac80211: Don't stop tx queue on master device while scanning.Mattias Nissler
mac80211 stops the tx queues during scans. This is wrong with respect to the master deivce tx queue, since stopping it prevents any probes from being sent during the scan. Instead, they accumulate in the queue and are only sent after the scan is finished, which is obviously wrong. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] mac80211: fix debugfs tx power reduction outputJohannes Berg
This patch fixes a typo in mac80211's debugfs.c. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] cfg80211: fix signed macaddress in sysfsDavid Lamparter
Fix signedness mixup making mac addresses show up strangely (like 00:11:22:33:44:ffffffaa) in /sys/class/ieee80211/*/macaddress. Signed-off-by: David Lamparter <equinox@diac24.net> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-08[IrDA]: f-timer reloading when sending rejected frames.G. Liakhovetski
Jean II was right: you have to re-charge the final timer when resending rejected frames. Otherwise it triggers at a wrong time and can break the currently running communication. Reproducible under rt-preempt. Signed-off-by: G. Liakhovetski <gl@dsa-ac.de> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-08[IrDA]: Fix Rx/Tx path race.G. Liakhovetski
From: G. Liakhovetski <gl@dsa-ac.de> We need to switch to NRM _before_ sending the final packet otherwise we might hit a race condition where we get the first packet from the peer while we're still in LAP_XMIT_P. Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-08[CIPSO]: Fix several unaligned kernel accesses in the CIPSO engine.Paul Moore
IPv4 options are not very well aligned within the packet and the format of a CIPSO option is even worse. The result is that the CIPSO engine in the kernel does a few unaligned accesses when parsing and validating incoming packets with CIPSO options attached which generate error messages on certain alignment sensitive platforms. This patch fixes this by marking these unaligned accesses with the get_unaliagned() macro. Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-08[NetLabel]: consolidate the struct socket/sock handling to just struct sockPaul Moore
The current NetLabel code has some redundant APIs which allow both "struct socket" and "struct sock" types to be used; this may have made sense at some point but it is wasteful now. Remove the functions that operate on sockets and convert the callers. Not only does this make the code smaller and more consistent but it pushes the locking burden up to the caller which can be more intelligent about the locks. Also, perform the same conversion (socket to sock) on the SELinux/NetLabel glue code where it make sense. Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-08[IPV4]: Do not remove idev when addresses are clearedHerbert Xu
Now that we create idev before addresses are added, it no longer makes sense to remove them when addresses are all deleted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07xfrm: Add security check before flushing SAD/SPDJoy Latten
Currently we check for permission before deleting entries from SAD and SPD, (see security_xfrm_policy_delete() security_xfrm_state_delete()) However we are not checking for authorization when flushing the SPD and the SAD completely. It was perhaps missed in the original security hooks patch. This patch adds a security check when flushing entries from the SAD and SPD. It runs the entire database and checks each entry for a denial. If the process attempting the flush is unable to remove all of the entries a denial is logged the the flush function returns an error without removing anything. This is particularly useful when a process may need to create or delete its own xfrm entries used for things like labeled networking but that same process should not be able to delete other entries or flush the entire database. Signed-off-by: Joy Latten<latten@austin.ibm.com> Signed-off-by: Eric Paris <eparis@parisplace.org> Signed-off-by: James Morris <jmorris@namei.org>
2007-06-07[NET_SCHED]: Fix filter double freePatrick McHardy
cbq and atm destroy their filters twice when destroying inner classes during qdisc destruction. Reported-and-tested-by: Strobl Anton <a.strobl@aws-it.at> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07[NET]: Avoid duplicate netlink notification when changing link stateThomas Graf
When changing the link state from userspace not affecting any other flags. Two duplicate notification are being sent, once as action in the NETDEV_UP/NETDEV_DOWN notification chain and a second time when comparing old and new device flags after the change has been completed. Although harmless, the duplicates should be avoided. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07[UDP]: Revert 2-pass hashing changes.David S. Miller
This reverts changesets: 6aaf47fa48d3c44280810b1b470261d340e4ed87 b7b5f487ab39bc10ed0694af35651a03d9cb97ff de34ed91c4ffa4727964a832c46e624dd1495cf5 fc038410b4b1643766f8033f4940bcdb1dace633 There are still some correctness issues recently discovered which do not have a known fix that doesn't involve doing a full hash table scan on port bind. So revert for now. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07[AF_UNIX]: Fix stream recvmsg() race.Miklos Szeredi
A recv() on an AF_UNIX, SOCK_STREAM socket can race with a send()+close() on the peer, causing recv() to return zero, even though the sent data should be received. This happens if the send() and the close() is performed between skb_dequeue() and checking sk->sk_shutdown in unix_stream_recvmsg(): process A skb_dequeue() returns NULL, there's no data in the socket queue process B new data is inserted onto the queue by unix_stream_sendmsg() process B sk->sk_shutdown is set to SHUTDOWN_MASK by unix_release_sock() process A sk->sk_shutdown is checked, unix_release_sock() returns zero I'm surprised nobody noticed this, it's not hard to trigger. Maybe it's just (un)luck with the timing. It's possible to work around this bug in userspace, by retrying the recv() once in case of a zero return value. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07[NETFILTER]: nf_conntrack_amanda: fix textsearch_prepare() error checkAkinobu Mita
The return value from textsearch_prepare() needs to be checked by IS_ERR(). Because it returns error code as a pointer. Cc: "Brian J. Murrell" <netfilter@interlinx.bc.ca> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07[NETFILTER]: ip_tables: fix compat related crashDmitry Mishin
check_compat_entry_size_and_hooks iterates over the matches and calls compat_check_calc_match, which loads the match and calculates the compat offsets, but unlike the non-compat version, doesn't call ->checkentry yet. On error however it calls cleanup_matches, which in turn calls ->destroy, which can result in crashes if the destroy function (validly) expects to only get called after the checkentry function. Add a compat_release_match function that only drops the module reference on error and rename compat_check_calc_match to compat_find_calc_match to reflect the fact that it doesn't call the checkentry function. Reported by Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Dmitry Mishin <dim@openvz.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07[NETFILTER]: nf_conntrack: fix helper module unload racesPatrick McHarrdy
When a helper module is unloaded all conntracks refering to it have their helper pointer NULLed out, leading to lots of races. In most places this can be fixed by proper use of RCU (they do already check for != NULL, but in a racy way), additionally nf_conntrack_expect_related needs to bail out when no helper is present. Also remove two paranoid BUG_ONs in nf_conntrack_proto_gre that are racy and not worth fixing. Signed-off-by: Patrick McHarrdy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07[RTNETLINK]: ifindex 0 does not existPatrick McHardy
ifindex == 0 does not exist and implies we should do a lookup by name if one was given. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>