summaryrefslogtreecommitdiff
path: root/net/netfilter
AgeCommit message (Collapse)Author
2018-03-24netfilter: x_tables: unlock on error in xt_find_table_lock()Dan Carpenter
[ Upstream commit 7dde07e9c53617549d67dd3e1d791496d0d3868e ] According to my static checker we should unlock here before the return. That seems reasonable to me as well. Fixes" b9e69e127397 ("netfilter: xtables: don't hook tables by default") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24ipvs: explicitly forbid ipv6 service/dest creation if ipv6 mod is disabledPaolo Abeni
[ Upstream commit 1442f6f7c1b77de1c508318164a527e240c24a4d ] When creating a new ipvs service, ipv6 addresses are always accepted if CONFIG_IP_VS_IPV6 is enabled. On dest creation the address family is not explicitly checked. This allows the user-space to configure ipvs services even if the system is booted with ipv6.disable=1. On specific configuration, ipvs can try to call ipv6 routing code at setup time, causing the kernel to oops due to fib6_rules_ops being NULL. This change addresses the issue adding a check for the ipv6 module being enabled while validating ipv6 service operations and adding the same validation for dest operations. According to git history, this issue is apparently present since the introduction of ipv6 support, and the oops can be triggered since commit 09571c7ae30865ad ("IPVS: Add function to determine if IPv6 address is local") Fixes: 09571c7ae30865ad ("IPVS: Add function to determine if IPv6 address is local") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24netfilter: nft_dynset: continue to next expr if _OP_ADD succeededLiping Zhang
[ Upstream commit 277a292835c196894ef895d5e1fd6170bb916f55 ] Currently, after adding the following nft rules: # nft add set x target1 { type ipv4_addr \; flags timeout \;} # nft add rule x y set add ip daddr timeout 1d @target1 counter the counters will always be zero despite of the elements are added to the dynamic set "target1" or not, as we will break the nft expr traversal unconditionally: # nft list ruleset ... set target1 { ... elements = { 8.8.8.8 expires 23h59m53s} } chain output { ... set add ip daddr timeout 1d @target1 counter packets 0 bytes 0 ^ ^ ... } Since we add the elements to the set successfully, we should continue to the next expression. Additionally, if elements are added to "flow table" successfully, we will _always_ continue to the next expr, even if the operation is _OP_ADD. So it's better to keep them to be consistent. Fixes: 22fe54d5fefc ("netfilter: nf_tables: add support for dynamic set updates") Reported-by: Robert White <rwhite@pobox.com> Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24netfilter: nf_ct_helper: permit cthelpers with different names via nfnetlinkLiping Zhang
[ Upstream commit 66e5a6b18bd09d0431e97cd3c162e76c5c2aebba ] cthelpers added via nfnetlink may have the same tuple, i.e. except for the l3proto and l4proto, other fields are all zero. So even with the different names, we will also fail to add them: # nfct helper add ssdp inet udp # nfct helper add tftp inet udp nfct v1.4.3: netlink error: File exists So in order to avoid unpredictable behaviour, we should: 1. cthelpers can be selected by nft ct helper obj or xt_CT target, so report error if duplicated { name, l3proto, l4proto } tuple exist. 2. cthelpers can be selected by nf_ct_tuple_src_mask_cmp when nf_ct_auto_assign_helper is enabled, so also report error if duplicated { l3proto, l4proto, src-port } tuple exist. Also note, if the cthelper is added from userspace, then the src-port will always be zero, it's invalid for nf_ct_auto_assign_helper, so there's no need to check the second point listed above. Fixes: 893e093c786c ("netfilter: nf_ct_helper: bail out on duplicated helpers") Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24netfilter: xt_CT: fix refcnt leak on error pathGao Feng
[ Upstream commit 470acf55a021713869b9bcc967268ac90c8a0fac ] There are two cases which causes refcnt leak. 1. When nf_ct_timeout_ext_add failed in xt_ct_set_timeout, it should free the timeout refcnt. Now goto the err_put_timeout error handler instead of going ahead. 2. When the time policy is not found, we should call module_put. Otherwise, the related cthelper module cannot be removed anymore. It is easy to reproduce by typing the following command: # iptables -t raw -A OUTPUT -p tcp -j CT --helper ftp --timeout xxx Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18netfilter: x_tables: pack percpu counter allocationsFlorian Westphal
commit ae0ac0ed6fcf5af3be0f63eb935f483f44a402d2 upstream. instead of allocating each xt_counter individually, allocate 4k chunks and then use these for counter allocation requests. This should speed up rule evaluation by increasing data locality, also speeds up ruleset loading because we reduce calls to the percpu allocator. As Eric points out we can't use PAGE_SIZE, page_allocator would fail on arches with 64k page size. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18netfilter: x_tables: pass xt_counters struct to counter allocatorFlorian Westphal
commit f28e15bacedd444608e25421c72eb2cf4527c9ca upstream. Keeps some noise away from a followup patch. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18netfilter: x_tables: pass xt_counters struct instead of packet counterFlorian Westphal
commit 4d31eef5176df06f218201bc9c0ce40babb41660 upstream. On SMP we overload the packet counter (unsigned long) to contain percpu offset. Hide this from callers and pass xt_counters address instead. Preparation patch to allocate the percpu counters in page-sized batch chunks. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18netfilter: IDLETIMER: be syzkaller friendlyEric Dumazet
commit cfc2c740533368b96e2be5e0a4e8c3cace7d9814 upstream. We had one report from syzkaller [1] First issue is that INIT_WORK() should be done before mod_timer() or we risk timer being fired too soon, even with a 1 second timer. Second issue is that we need to reject too big info->timeout to avoid overflows in msecs_to_jiffies(info->timeout * 1000), or risk looping, if result after overflow is 0. [1] WARNING: CPU: 1 PID: 5129 at kernel/workqueue.c:1444 __queue_work+0xdf4/0x1230 kernel/workqueue.c:1444 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 5129 Comm: syzkaller159866 Not tainted 4.16.0-rc1+ #230 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 panic+0x1e4/0x41c kernel/panic.c:183 __warn+0x1dc/0x200 kernel/panic.c:547 report_bug+0x211/0x2d0 lib/bug.c:184 fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178 fixup_bug arch/x86/kernel/traps.c:247 [inline] do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315 invalid_op+0x22/0x40 arch/x86/entry/entry_64.S:988 RIP: 0010:__queue_work+0xdf4/0x1230 kernel/workqueue.c:1444 RSP: 0018:ffff8801db507538 EFLAGS: 00010006 RAX: ffff8801aeb46080 RBX: ffff8801db530200 RCX: ffffffff81481404 RDX: 0000000000000100 RSI: ffffffff86b42640 RDI: 0000000000000082 RBP: ffff8801db507758 R08: 1ffff1003b6a0de5 R09: 000000000000000c R10: ffff8801db5073f0 R11: 0000000000000020 R12: 1ffff1003b6a0eb6 R13: ffff8801b1067ae0 R14: 00000000000001f8 R15: dffffc0000000000 queue_work_on+0x16a/0x1c0 kernel/workqueue.c:1488 queue_work include/linux/workqueue.h:488 [inline] schedule_work include/linux/workqueue.h:546 [inline] idletimer_tg_expired+0x44/0x60 net/netfilter/xt_IDLETIMER.c:116 call_timer_fn+0x228/0x820 kernel/time/timer.c:1326 expire_timers kernel/time/timer.c:1363 [inline] __run_timers+0x7ee/0xb70 kernel/time/timer.c:1666 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692 __do_softirq+0x2d7/0xb85 kernel/softirq.c:285 invoke_softirq kernel/softirq.c:365 [inline] irq_exit+0x1cc/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:541 [inline] smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:829 </IRQ> RIP: 0010:arch_local_irq_restore arch/x86/include/asm/paravirt.h:777 [inline] RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160 [inline] RIP: 0010:_raw_spin_unlock_irqrestore+0x5e/0xba kernel/locking/spinlock.c:184 RSP: 0018:ffff8801c20173c8 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff12 RAX: dffffc0000000000 RBX: 0000000000000282 RCX: 0000000000000006 RDX: 1ffffffff0d592cd RSI: 1ffff10035d68d23 RDI: 0000000000000282 RBP: ffff8801c20173d8 R08: 1ffff10038402e47 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff8820e5c8 R13: ffff8801b1067ad8 R14: ffff8801aea7c268 R15: ffff8801aea7c278 __debug_object_init+0x235/0x1040 lib/debugobjects.c:378 debug_object_init+0x17/0x20 lib/debugobjects.c:391 __init_work+0x2b/0x60 kernel/workqueue.c:506 idletimer_tg_create net/netfilter/xt_IDLETIMER.c:152 [inline] idletimer_tg_checkentry+0x691/0xb00 net/netfilter/xt_IDLETIMER.c:213 xt_check_target+0x22c/0x7d0 net/netfilter/x_tables.c:850 check_target net/ipv6/netfilter/ip6_tables.c:533 [inline] find_check_entry.isra.7+0x935/0xcf0 net/ipv6/netfilter/ip6_tables.c:575 translate_table+0xf52/0x1690 net/ipv6/netfilter/ip6_tables.c:744 do_replace net/ipv6/netfilter/ip6_tables.c:1160 [inline] do_ip6t_set_ctl+0x370/0x5f0 net/ipv6/netfilter/ip6_tables.c:1686 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115 ipv6_setsockopt+0x10b/0x130 net/ipv6/ipv6_sockglue.c:927 udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422 sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2976 SYSC_setsockopt net/socket.c:1850 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1829 do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287 Fixes: 0902b469bd25 ("netfilter: xtables: idletimer target implementation") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18netfilter: nat: cope with negative port rangePaolo Abeni
commit db57ccf0f2f4624b4c4758379f8165277504fbd7 upstream. syzbot reported a division by 0 bug in the netfilter nat code: divide error: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 4168 Comm: syzkaller034710 Not tainted 4.16.0-rc1+ #309 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:nf_nat_l4proto_unique_tuple+0x291/0x530 net/netfilter/nf_nat_proto_common.c:88 RSP: 0018:ffff8801b2466778 EFLAGS: 00010246 RAX: 000000000000f153 RBX: ffff8801b2466dd8 RCX: ffff8801b2466c7c RDX: 0000000000000000 RSI: ffff8801b2466c58 RDI: ffff8801db5293ac RBP: ffff8801b24667d8 R08: ffff8801b8ba6dc0 R09: ffffffff88af5900 R10: ffff8801b24666f0 R11: 0000000000000000 R12: 000000002990f153 R13: 0000000000000001 R14: 0000000000000000 R15: ffff8801b2466c7c FS: 00000000017e3880(0000) GS:ffff8801db500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000208fdfe4 CR3: 00000001b5340002 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: dccp_unique_tuple+0x40/0x50 net/netfilter/nf_nat_proto_dccp.c:30 get_unique_tuple+0xc28/0x1c10 net/netfilter/nf_nat_core.c:362 nf_nat_setup_info+0x1c2/0xe00 net/netfilter/nf_nat_core.c:406 nf_nat_redirect_ipv6+0x306/0x730 net/netfilter/nf_nat_redirect.c:124 redirect_tg6+0x7f/0xb0 net/netfilter/xt_REDIRECT.c:34 ip6t_do_table+0xc2a/0x1a30 net/ipv6/netfilter/ip6_tables.c:365 ip6table_nat_do_chain+0x65/0x80 net/ipv6/netfilter/ip6table_nat.c:41 nf_nat_ipv6_fn+0x594/0xa80 net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:302 nf_nat_ipv6_local_fn+0x33/0x5d0 net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:407 ip6table_nat_local_fn+0x2c/0x40 net/ipv6/netfilter/ip6table_nat.c:69 nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline] nf_hook_slow+0xba/0x1a0 net/netfilter/core.c:483 nf_hook include/linux/netfilter.h:243 [inline] NF_HOOK include/linux/netfilter.h:286 [inline] ip6_xmit+0x10ec/0x2260 net/ipv6/ip6_output.c:277 inet6_csk_xmit+0x2fc/0x580 net/ipv6/inet6_connection_sock.c:139 dccp_transmit_skb+0x9ac/0x10f0 net/dccp/output.c:142 dccp_connect+0x369/0x670 net/dccp/output.c:564 dccp_v6_connect+0xe17/0x1bf0 net/dccp/ipv6.c:946 __inet_stream_connect+0x2d4/0xf00 net/ipv4/af_inet.c:620 inet_stream_connect+0x58/0xa0 net/ipv4/af_inet.c:684 SYSC_connect+0x213/0x4a0 net/socket.c:1639 SyS_connect+0x24/0x30 net/socket.c:1620 do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x441c69 RSP: 002b:00007ffe50cc0be8 EFLAGS: 00000217 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: ffffffffffffffff RCX: 0000000000441c69 RDX: 000000000000001c RSI: 00000000208fdfe4 RDI: 0000000000000003 RBP: 00000000006cc018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000538 R11: 0000000000000217 R12: 0000000000403590 R13: 0000000000403620 R14: 0000000000000000 R15: 0000000000000000 Code: 48 89 f0 83 e0 07 83 c0 01 38 d0 7c 08 84 d2 0f 85 46 02 00 00 48 8b 45 c8 44 0f b7 20 e8 88 97 04 fd 31 d2 41 0f b7 c4 4c 89 f9 <41> f7 f6 48 c1 e9 03 48 b8 00 00 00 00 00 fc ff df 0f b6 0c 01 RIP: nf_nat_l4proto_unique_tuple+0x291/0x530 net/netfilter/nf_nat_proto_common.c:88 RSP: ffff8801b2466778 The problem is that currently we don't have any check on the configured port range. A port range == -1 triggers the bug, while other negative values may require a very long time to complete the following loop. This commit addresses the issue swapping the two ends on negative ranges. The check is performed in nf_nat_l4proto_unique_tuple() since the nft nat loads the port values from nft registers at runtime. v1 -> v2: use the correct 'Fixes' tag v2 -> v3: update commit message, drop unneeded READ_ONCE() Fixes: 5b1158e909ec ("[NETFILTER]: Add NAT support for nf_conntrack") Reported-by: syzbot+8012e198bd037f4871e5@syzkaller.appspotmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18netfilter: x_tables: fix missing timer initialization in xt_LEDPaolo Abeni
commit 10414014bc085aac9f787a5890b33b5605fbcfc4 upstream. syzbot reported that xt_LED may try to use the ledinternal->timer without previously initializing it: ------------[ cut here ]------------ kernel BUG at kernel/time/timer.c:958! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 1826 Comm: kworker/1:2 Not tainted 4.15.0+ #306 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:__mod_timer kernel/time/timer.c:958 [inline] RIP: 0010:mod_timer+0x7d6/0x13c0 kernel/time/timer.c:1102 RSP: 0018:ffff8801d24fe9f8 EFLAGS: 00010293 RAX: ffff8801d25246c0 RBX: ffff8801aec6cb50 RCX: ffffffff816052c6 RDX: 0000000000000000 RSI: 00000000fffbd14b RDI: ffff8801aec6cb68 RBP: ffff8801d24fec98 R08: 0000000000000000 R09: 1ffff1003a49fd6c R10: ffff8801d24feb28 R11: 0000000000000005 R12: dffffc0000000000 R13: ffff8801d24fec70 R14: 00000000fffbd14b R15: ffff8801af608f90 FS: 0000000000000000(0000) GS:ffff8801db500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000206d6fd0 CR3: 0000000006a22001 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: led_tg+0x1db/0x2e0 net/netfilter/xt_LED.c:75 ip6t_do_table+0xc2a/0x1a30 net/ipv6/netfilter/ip6_tables.c:365 ip6table_raw_hook+0x65/0x80 net/ipv6/netfilter/ip6table_raw.c:42 nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline] nf_hook_slow+0xba/0x1a0 net/netfilter/core.c:483 nf_hook.constprop.27+0x3f6/0x830 include/linux/netfilter.h:243 NF_HOOK include/linux/netfilter.h:286 [inline] ndisc_send_skb+0xa51/0x1370 net/ipv6/ndisc.c:491 ndisc_send_ns+0x38a/0x870 net/ipv6/ndisc.c:633 addrconf_dad_work+0xb9e/0x1320 net/ipv6/addrconf.c:4008 process_one_work+0xbbf/0x1af0 kernel/workqueue.c:2113 worker_thread+0x223/0x1990 kernel/workqueue.c:2247 kthread+0x33c/0x400 kernel/kthread.c:238 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:429 Code: 85 2a 0b 00 00 4d 8b 3c 24 4d 85 ff 75 9f 4c 8b bd 60 fd ff ff e8 bb 57 10 00 65 ff 0d 94 9a a1 7e e9 d9 fc ff ff e8 aa 57 10 00 <0f> 0b e8 a3 57 10 00 e9 14 fb ff ff e8 99 57 10 00 4c 89 bd 70 RIP: __mod_timer kernel/time/timer.c:958 [inline] RSP: ffff8801d24fe9f8 RIP: mod_timer+0x7d6/0x13c0 kernel/time/timer.c:1102 RSP: ffff8801d24fe9f8 ---[ end trace f661ab06f5dd8b3d ]--- The ledinternal struct can be shared between several different xt_LED targets, but the related timer is currently initialized only if the first target requires it. Fix it by unconditionally initializing the timer struct. v1 -> v2: call del_timer_sync() unconditionally, too. Fixes: 268cb38e1802 ("netfilter: x_tables: add LED trigger target") Reported-by: syzbot+10c98dc5725c6c8fc7fb@syzkaller.appspotmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25netfilter: xt_RATEEST: acquire xt_rateest_mutex for hash insertCong Wang
commit 7dc68e98757a8eccf8ca7a53a29b896f1eef1f76 upstream. rateest_hash is supposed to be protected by xt_rateest_mutex, and, as suggested by Eric, lookup and insert should be atomic, so we should acquire the xt_rateest_mutex once for both. So introduce a non-locking helper for internal use and keep the locking one for external. Reported-by: <syzbot+5cb189720978275e4c75@syzkaller.appspotmail.com> Fixes: 5859034d7eb8 ("[NETFILTER]: x_tables: add RATEEST target") Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Florian Westphal <fw@strlen.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25netfilter: xt_cgroup: initialize info->priv in cgroup_mt_check_v1()Cong Wang
commit ba7cd5d95f25cc6005f687dabdb4e7a6063adda9 upstream. xt_cgroup_info_v1->priv is an internal pointer only used for kernel, we should not trust what user-space provides. Reported-by: <syzbot+4fbcfcc0d2e6592bd641@syzkaller.appspotmail.com> Fixes: c38c4597e4bf ("netfilter: implement xt_cgroup cgroup2 path match") Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25netfilter: x_tables: avoid out-of-bounds reads in xt_request_find_{match|target}Eric Dumazet
commit da17c73b6eb74aad3c3c0654394635675b623b3e upstream. It looks like syzbot found its way into netfilter territory. Issue here is that @name comes from user space and might not be null terminated. Out-of-bound reads happen, KASAN is not happy. v2 added similar fix for xt_request_find_target(), as Florian advised. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25netfilter: x_tables: fix int overflow in xt_alloc_table_info()Dmitry Vyukov
commit 889c604fd0b5f6d3b8694ade229ee44124de1127 upstream. syzkaller triggered OOM kills by passing ipt_replace.size = -1 to IPT_SO_SET_REPLACE. The root cause is that SMP_ALIGN() in xt_alloc_table_info() causes int overflow and the size check passes when it should not. SMP_ALIGN() is no longer needed leftover. Remove SMP_ALIGN() call in xt_alloc_table_info(). Reported-by: syzbot+4396883fa8c4f64e0175@syzkaller.appspotmail.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31netfilter: xt_osf: Add missing permission checksKevin Cernekee
commit 916a27901de01446bcf57ecca4783f6cff493309 upstream. The capability check in nfnetlink_rcv() verifies that the caller has CAP_NET_ADMIN in the namespace that "owns" the netlink socket. However, xt_osf_fingers is shared by all net namespaces on the system. An unprivileged user can create user and net namespaces in which he holds CAP_NET_ADMIN to bypass the netlink_net_capable() check: vpnns -- nfnl_osf -f /tmp/pf.os vpnns -- nfnl_osf -f /tmp/pf.os -d These non-root operations successfully modify the systemwide OS fingerprint list. Add new capable() checks so that they can't. Signed-off-by: Kevin Cernekee <cernekee@chromium.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31netfilter: nfnetlink_cthelper: Add missing permission checksKevin Cernekee
commit 4b380c42f7d00a395feede754f0bc2292eebe6e5 upstream. The capability check in nfnetlink_rcv() verifies that the caller has CAP_NET_ADMIN in the namespace that "owns" the netlink socket. However, nfnl_cthelper_list is shared by all net namespaces on the system. An unprivileged user can create user and net namespaces in which he holds CAP_NET_ADMIN to bypass the netlink_net_capable() check: $ nfct helper list nfct v1.4.4: netlink error: Operation not permitted $ vpnns -- nfct helper list { .name = ftp, .queuenum = 0, .l3protonum = 2, .l4protonum = 6, .priv_data_len = 24, .status = enabled, }; Add capable() checks in nfnetlink_cthelper, as this is cleaner than trying to generalize the solution. Signed-off-by: Kevin Cernekee <cernekee@chromium.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25netfilter: nfnetlink_queue: fix secctx memory leakLiping Zhang
[ Upstream commit 77c1c03c5b8ef28e55bb0aff29b1e006037ca645 ] We must call security_release_secctx to free the memory returned by security_secid_to_secctx, otherwise memory may be leaked forever. Fixes: ef493bd930ae ("netfilter: nfnetlink_queue: add security context information") Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25netfilter: nfnl_cthelper: fix a race when walk the nf_ct_helper_hash tableLiping Zhang
[ Upstream commit 83d90219a5df8d950855ce73229a97b63605c317 ] The nf_ct_helper_hash table is protected by nf_ct_helper_mutex, while nfct_helper operation is protected by nfnl_lock(NFNL_SUBSYS_CTHELPER). So it's possible that one CPU is walking the nf_ct_helper_hash for cthelper add/get/del, another cpu is doing nf_conntrack_helpers_unregister at the same time. This is dangrous, and may cause use after free error. Note, delete operation will flush all cthelpers added via nfnetlink, so using rcu to do protect is not easy. Now introduce a dummy list to record all the cthelpers added via nfnetlink, then we can walk the dummy list instead of walking the nf_ct_helper_hash. Also, keep nfnl_cthelper_dump_table unchanged, it may be invoked without nfnl_lock(NFNL_SUBSYS_CTHELPER) held. Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25netfilter: nfnl_cthelper: Fix memory leakJeffy Chen
[ Upstream commit f83bf8da1135ca635aac8f062cad3f001fcf3a26 ] We have memory leaks of nf_conntrack_helper & expect_policy. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25netfilter: nfnl_cthelper: fix runtime expectation policy updatesPablo Neira Ayuso
[ Upstream commit 2c422257550f123049552b39f7af6e3428a60f43 ] We only allow runtime updates of expectation policies for timeout and maximum number of expectations, otherwise reject the update. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20netfilter: ipvs: Fix inappropriate output of procfsKUWAZAWA Takuya
[ Upstream commit c5504f724c86ee925e7ffb80aa342cfd57959b13 ] Information about ipvs in different network namespace can be seen via procfs. How to reproduce: # ip netns add ns01 # ip netns add ns02 # ip netns exec ns01 ip a add dev lo 127.0.0.1/8 # ip netns exec ns02 ip a add dev lo 127.0.0.1/8 # ip netns exec ns01 ipvsadm -A -t 10.1.1.1:80 # ip netns exec ns02 ipvsadm -A -t 10.1.1.2:80 The ipvsadm displays information about its own network namespace only. # ip netns exec ns01 ipvsadm -Ln IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 10.1.1.1:80 wlc # ip netns exec ns02 ipvsadm -Ln IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 10.1.1.2:80 wlc But I can see information about other network namespace via procfs. # ip netns exec ns01 cat /proc/net/ip_vs IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 0A010101:0050 wlc TCP 0A010102:0050 wlc # ip netns exec ns02 cat /proc/net/ip_vs IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 0A010102:0050 wlc Signed-off-by: KUWAZAWA Takuya <albatross0@gmail.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16Fix handling of verdicts after NF_QUEUEDebabrata Banerjee
[This fix is only needed for v4.9 stable since v4.10+ does not have the issue] A verdict of NF_STOLEN after NF_QUEUE will cause an incorrect return value and a potential kernel panic via double free of skb's This was broken by commit 7034b566a4e7 ("netfilter: fix nf_queue handling") and subsequently fixed in v4.10 by commit c63cbc460419 ("netfilter: use switch() to handle verdict cases from nf_hook_slow()"). However that commit cannot be cleanly cherry-picked to v4.9 Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-11-30netfilter: nf_tables: fix oob accessFlorian Westphal
[ Upstream commit 3e38df136e453aa69eb4472108ebce2fb00b1ba6 ] BUG: KASAN: slab-out-of-bounds in nf_tables_rule_destroy+0xf1/0x130 at addr ffff88006a4c35c8 Read of size 8 by task nft/1607 When we've destroyed last valid expr, nft_expr_next() returns an invalid expr. We must not dereference it unless it passes != nft_expr_last() check. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30netfilter: nft_queue: use raw_smp_processor_id()Pablo Neira Ayuso
[ Upstream commit c2e756ff9e699865d294cdc112acfc36419cf5cc ] Using smp_processor_id() causes splats with PREEMPT_RCU: [19379.552780] BUG: using smp_processor_id() in preemptible [00000000] code: ping/32389 [19379.552793] caller is debug_smp_processor_id+0x17/0x19 [...] [19379.552823] Call Trace: [19379.552832] [<ffffffff81274e9e>] dump_stack+0x67/0x90 [19379.552837] [<ffffffff8129a4d4>] check_preemption_disabled+0xe5/0xf5 [19379.552842] [<ffffffff8129a4fb>] debug_smp_processor_id+0x17/0x19 [19379.552849] [<ffffffffa07c42dd>] nft_queue_eval+0x35/0x20c [nft_queue] No need to disable preemption since we only fetch the numeric value, so let's use raw_smp_processor_id() instead. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-18netfilter: nat: Revert "netfilter: nat: convert nat bysrc hash to rhashtable"Florian Westphal
commit e1bf1687740ce1a3598a1c5e452b852ff2190682 upstream. This reverts commit 870190a9ec9075205c0fa795a09fa931694a3ff1. It was not a good idea. The custom hash table was a much better fit for this purpose. A fast lookup is not essential, in fact for most cases there is no lookup at all because original tuple is not taken and can be used as-is. What needs to be fast is insertion and deletion. rhlist removal however requires a rhlist walk. We can have thousands of entries in such a list if source port/addresses are reused for multiple flows, if this happens removal requests are so expensive that deletions of a few thousand flows can take several seconds(!). The advantages that we got from rhashtable are: 1) table auto-sizing 2) multiple locks 1) would be nice to have, but it is not essential as we have at most one lookup per new flow, so even a million flows in the bysource table are not a problem compared to current deletion cost. 2) is easy to add to custom hash table. I tried to add hlist_node to rhlist to speed up rhltable_remove but this isn't doable without changing semantics. rhltable_remove_fast will check that the to-be-deleted object is part of the table and that requires a list walk that we want to avoid. Furthermore, using hlist_node increases size of struct rhlist_head, which in turn increases nf_conn size. Link: https://bugzilla.kernel.org/show_bug.cgi?id=196821 Reported-by: Ivan Babrou <ibobrik@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-18netfilter: nat: avoid use of nf_conn_nat extensionFlorian Westphal
commit 6e699867f84c0f358fed233fe6162173aca28e04 upstream. successful insert into the bysource hash sets IPS_SRC_NAT_DONE status bit so we can check that instead of presence of nat extension which requires extra deref. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15netfilter: nft_meta: deal with PACKET_LOOPBACK in netdev familyLiping Zhang
[ Upstream commit f169fd695b192dd7b23aff8e69d25a1bc881bbfa ] After adding the following nft rule, then ping 224.0.0.1: # nft add rule netdev t c pkttype host counter The warning complain message will be printed out again and again: WARNING: CPU: 0 PID: 10182 at net/netfilter/nft_meta.c:163 \ nft_meta_get_eval+0x3fe/0x460 [nft_meta] [...] Call Trace: <IRQ> dump_stack+0x85/0xc2 __warn+0xcb/0xf0 warn_slowpath_null+0x1d/0x20 nft_meta_get_eval+0x3fe/0x460 [nft_meta] nft_do_chain+0xff/0x5e0 [nf_tables] So we should deal with PACKET_LOOPBACK in netdev family too. For ipv4, convert it to PACKET_BROADCAST/MULTICAST according to the destination address's type; For ipv6, convert it to PACKET_MULTICAST directly. Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-21netfilter: nf_ct_expect: Change __nf_ct_expect_check() return value.Jarno Rajahalme
[ Upstream commit 4b86c459c7bee3acaf92f0e2b4c6ac803eaa1a58 ] Commit 4dee62b1b9b4 ("netfilter: nf_ct_expect: nf_ct_expect_insert() returns void") inadvertently changed the successful return value of nf_ct_expect_related_report() from 0 to 1 due to __nf_ct_expect_check() returning 1 on success. Prevent this regression in the future by changing the return value of __nf_ct_expect_check() to 0 on success. Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Acked-by: Joe Stringer <joe@ovn.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08netfilter: nfnl_cthelper: fix incorrect helper->expect_class_maxLiping Zhang
[ Upstream commit ae5c682113f9f94cc5e76f92cf041ee624c173ee ] The helper->expect_class_max must be set to the total number of expect_policy minus 1, since we will use the statement "if (class > helper->expect_class_max)" to validate the CTA_EXPECT_CLASS attr in ctnetlink_alloc_expect. So for compatibility, set the helper->expect_class_max to the NFCTH_POLICY_SET_NUM attr's value minus 1. Also: it's invalid when the NFCTH_POLICY_SET_NUM attr's value is zero. 1. this will result "expect_policy = kzalloc(0, GFP_KERNEL);"; 2. we cannot set the helper->expect_class_max to a proper value. So if nla_get_be32(tb[NFCTH_POLICY_SET_NUM]) is zero, report -EINVAL to the userspace. Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08netfilter: invoke synchronize_rcu after set the _hook_ to NULLLiping Zhang
[ Upstream commit 3b7dabf029478bb80507a6c4500ca94132a2bc0b ] Otherwise, another CPU may access the invalid pointer. For example: CPU0 CPU1 - rcu_read_lock(); - pfunc = _hook_; _hook_ = NULL; - mod unload - - pfunc(); // invalid, panic - rcu_read_unlock(); So we must call synchronize_rcu() to wait the rcu reader to finish. Also note, in nf_nat_snmp_basic_fini, synchronize_rcu() will be invoked by later nf_conntrack_helper_unregister, but I'm inclined to add a explicit synchronize_rcu after set the nf_nat_snmp_hook to NULL. Depend on such obscure assumptions is not a good idea. Last, in nfnetlink_cttimeout, we use kfree_rcu to free the time object, so in cttimeout_exit, invoking rcu_barrier() is not necessary at all, remove it too. Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-27net/netfilter/nf_conntrack_core: Fix net_conntrack_lock()Manfred Spraul
commit 3ef0c7a730de0bae03d86c19570af764fa3c4445 upstream. As we want to remove spin_unlock_wait() and replace it with explicit spin_lock()/spin_unlock() calls, we can use this to simplify the locking. In addition: - Reading nf_conntrack_locks_all needs ACQUIRE memory ordering. - The new code avoids the backwards loop. Only slightly tested, I did not manage to trigger calls to nf_conntrack_all_lock(). V2: With improved comments, to clearly show how the barriers pair. Fixes: b16c29191dc8 ("netfilter: nf_conntrack: use safer way to lock all buckets") Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: netfilter-devel@vger.kernel.org Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30netfilter: nat: fix src map lookupFlorian Westphal
commit 97772bcd56efa21d9d8976db6f205574ea602f51 upstream. When doing initial conversion to rhashtable I replaced the bucket walk with a single rhashtable_lookup_fast(). When moving to rhlist I failed to properly walk the list of identical tuples, but that is what is needed for this to work correctly. The table contains the original tuples, so the reply tuples are all distinct. We currently decide that mapping is (not) in range only based on the first entry, but in case its not we need to try the reply tuple of the next entry until we either find an in-range mapping or we checked all the entries. This bug makes nat core attempt collision resolution while it might be able to use the mapping as-is. Fixes: 870190a9ec90 ("netfilter: nat: convert nat bysrc hash to rhashtable") Reported-by: Jaco Kroon <jaco@uls.co.za> Tested-by: Jaco Kroon <jaco@uls.co.za> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-24netfilter: nf_ct_ext: fix possible panic after nf_ct_extend_unregisterLiping Zhang
commit 9c3f3794926a997b1cab6c42480ff300efa2d162 upstream. If one cpu is doing nf_ct_extend_unregister while another cpu is doing __nf_ct_ext_add_length, then we may hit BUG_ON(t == NULL). Moreover, there's no synchronize_rcu invocation after set nf_ct_ext_types[id] to NULL, so it's possible that we may access invalid pointer. But actually, most of the ct extends are built-in, so the problem listed above will not happen. However, there are two exceptions: NF_CT_EXT_NAT and NF_CT_EXT_SYNPROXY. For _EXT_NAT, the panic will not happen, since adding the nat extend and unregistering the nat extend are located in the same file(nf_nat_core.c), this means that after the nat module is removed, we cannot add the nat extend too. For _EXT_SYNPROXY, synproxy extend may be added by init_conntrack, while synproxy extend unregister will be done by synproxy_core_exit. So after nf_synproxy_core.ko is removed, we may still try to add the synproxy extend, then kernel panic may happen. I know it's very hard to reproduce this issue, but I can play a tricky game to make it happen very easily :) Step 1. Enable SYNPROXY for tcp dport 1234 at FORWARD hook: # iptables -I FORWARD -p tcp --dport 1234 -j SYNPROXY Step 2. Queue the syn packet to the userspace at raw table OUTPUT hook. Also note, in the userspace we only add a 20s' delay, then reinject the syn packet to the kernel: # iptables -t raw -I OUTPUT -p tcp --syn -j NFQUEUE --queue-num 1 Step 3. Using "nc 2.2.2.2 1234" to connect the server. Step 4. Now remove the nf_synproxy_core.ko quickly: # iptables -F FORWARD # rmmod ipt_SYNPROXY # rmmod nf_synproxy_core Step 5. After 20s' delay, the syn packet is reinjected to the kernel. Now you will see the panic like this: kernel BUG at net/netfilter/nf_conntrack_extend.c:91! Call Trace: ? __nf_ct_ext_add_length+0x53/0x3c0 [nf_conntrack] init_conntrack+0x12b/0x600 [nf_conntrack] nf_conntrack_in+0x4cc/0x580 [nf_conntrack] ipv4_conntrack_local+0x48/0x50 [nf_conntrack_ipv4] nf_reinject+0x104/0x270 nfqnl_recv_verdict+0x3e1/0x5f9 [nfnetlink_queue] ? nfqnl_recv_verdict+0x5/0x5f9 [nfnetlink_queue] ? nla_parse+0xa0/0x100 nfnetlink_rcv_msg+0x175/0x6a9 [nfnetlink] [...] One possible solution is to make NF_CT_EXT_SYNPROXY extend built-in, i.e. introduce nf_conntrack_synproxy.c and only do ct extend register and unregister in it, similar to nf_conntrack_timeout.c. But having such a obscure restriction of nf_ct_extend_unregister is not a good idea, so we should invoke synchronize_rcu after set nf_ct_ext_types to NULL, and check the NULL pointer when do __nf_ct_ext_add_length. Then it will be easier if we add new ct extend in the future. Last, we use kfree_rcu to free nf_ct_ext, so rcu_barrier() is unnecessary anymore, remove it too. Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27ipvs: SNAT packet replies only for NATed connectionsJulian Anastasov
commit 3c5ab3f395d66a9e4e937fcfdf6ebc63894f028b upstream. We do not check if packet from real server is for NAT connection before performing SNAT. This causes problems for setups that use DR/TUN and allow local clients to access the real server directly, for example: - local client in director creates IPVS-DR/TUN connection CIP->VIP and the request packets are routed to RIP. Talks are finished but IPVS connection is not expired yet. - second local client creates non-IPVS connection CIP->RIP with same reply tuple RIP->CIP and when replies are received on LOCAL_IN we wrongly assign them for the first client connection because RIP->CIP matches the reply direction. As result, IPVS SNATs replies for non-IPVS connections. The problem is more visible to local UDP clients but in rare cases it can happen also for TCP or remote clients when the real server sends the reply traffic via the director. So, better to be more precise for the reply traffic. As replies are not expected for DR/TUN connections, better to not touch them. Reported-by: Nick Moriarty <nick.moriarty@york.ac.uk> Tested-by: Nick Moriarty <nick.moriarty@york.ac.uk> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-05netfilter: synproxy: fix conntrackd interactionEric Leblond
commit 87e94dbc210a720a34be5c1174faee5c84be963e upstream. This patch fixes the creation of connection tracking entry from netlink when synproxy is used. It was missing the addition of the synproxy extension. This was causing kernel crashes when a conntrack entry created by conntrackd was used after the switch of traffic from active node to the passive node. Signed-off-by: Eric Leblond <eric@regit.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-05netfilter: xt_TCPMSS: add more sanity tests on tcph->doffEric Dumazet
commit 2638fd0f92d4397884fd991d8f4925cb3f081901 upstream. Denys provided an awesome KASAN report pointing to an use after free in xt_TCPMSS I have provided three patches to fix this issue, either in xt_TCPMSS or in xt_tcpudp.c. It seems xt_TCPMSS patch has the smallest possible impact. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-17netfilter: nft_log: restrict the log prefix length to 127Liping Zhang
[ Upstream commit 5ce6b04ce96896e8a79e6f60740ced911eaac7a4 ] First, log prefix will be truncated to NF_LOG_PREFIXLEN-1, i.e. 127, at nf_log_packet(), so the extra part is useless. Second, after adding a log rule with a very very long prefix, we will fail to dump the nft rules after this _special_ one, but acctually, they do exist. For example: # name_65000=$(printf "%0.sQ" {1..65000}) # nft add rule filter output log prefix "$name_65000" # nft add rule filter output counter # nft add rule filter output counter # nft list chain filter output table ip filter { chain output { type filter hook output priority 0; policy accept; } } So now, restrict the log prefix length to NF_LOG_PREFIXLEN-1. Fixes: 96518518cc41 ("netfilter: add nftables") Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-17netfilter: nf_tables: fix set->nelems counting with no NLM_F_EXCLPablo Neira Ayuso
[ Upstream commit 35d0ac9070ef619e3bf44324375878a1c540387b ] If the element exists and no NLM_F_EXCL is specified, do not bump set->nelems, otherwise we leak one set element slot. This problem amplifies if the set is full since the abort path always decrements the counter for the -ENFILE case too, giving one spare extra slot. Fix this by moving set->nelems update to nft_add_set_elem() after successful element insertion. Moreover, remove the element if the set is full so there is no need to rely on the abort path to undo things anymore. Fixes: c016c7e45ddf ("netfilter: nf_tables: honor NLM_F_EXCL flag in set element insertion") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-17netfilter: nf_conntrack_sip: fix wrong memory initialisationChristophe Leroy
commit da2f27e9e615d1c799c9582b15262458da61fddc upstream. In commit 82de0be6862cd ("netfilter: Add helper array register/unregister functions"), struct nf_conntrack_helper sip[MAX_PORTS][4] was changed to sip[MAX_PORTS * 4], so the memory init should have been changed to memset(&sip[4 * i], 0, 4 * sizeof(sip[i])); But as the sip[] table is allocated in the BSS, it is already set to 0 Fixes: 82de0be6862cd ("netfilter: Add helper array register/unregister functions") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14netfilter: nft_set_rbtree: handle element re-addition after deletionPablo Neira Ayuso
commit d2df92e98a34a5619dadd29c6291113c009181e7 upstream. The existing code selects no next branch to be inspected when re-inserting an inactive element into the rb-tree, looping endlessly. This patch restricts the check for active elements to the EEXIST case only. Fixes: e701001e7cbe ("netfilter: nft_rbtree: allow adjacent intervals with dynamic updates") Reported-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Tested-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-12netfilter: conntrack: refine gc worker heuristics, reduxFlorian Westphal
commit e5072053b09642b8ff417d47da05b84720aea3ee upstream. This further refines the changes made to conntrack gc_worker in commit e0df8cae6c16 ("netfilter: conntrack: refine gc worker heuristics"). The main idea of that change was to reduce the scan interval when evictions take place. However, on the reporters' setup, there are 1-2 million conntrack entries in total and roughly 8k new (and closing) connections per second. In this case we'll always evict at least one entry per gc cycle and scan interval is always at 1 jiffy because of this test: } else if (expired_count) { gc_work->next_gc_run /= 2U; next_run = msecs_to_jiffies(1); being true almost all the time. Given we scan ~10k entries per run its clearly wrong to reduce interval based on nonzero eviction count, it will only waste cpu cycles since a vast majorities of conntracks are not timed out. Thus only look at the ratio (scanned entries vs. evicted entries) to make a decision on whether to reduce or not. Because evictor is supposed to only kick in when system turns idle after a busy period, pick a high ratio -- this makes it 50%. We thus keep the idea of increasing scan rate when its likely that table contains many expired entries. In order to not let timed-out entries hang around for too long (important when using event logging, in which case we want to timely destroy events), we now scan the full table within at most GC_MAX_SCAN_JIFFIES (16 seconds) even in worst-case scenario where all timed-out entries sit in same slot. I tested this with a vm under synflood (with sysctl net.netfilter.nf_conntrack_tcp_timeout_syn_recv=3). While flood is ongoing, interval now stays at its max rate (GC_MAX_SCAN_JIFFIES / GC_MAX_BUCKETS_DIV -> 125ms). With feedback from Nicolas Dichtel. Reported-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Fixes: b87a2f9199ea82eaadc ("netfilter: conntrack: add gc worker to remove timed-out entries") Signed-off-by: Florian Westphal <fw@strlen.de> Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-12netfilter: conntrack: remove GC_MAX_EVICTS breakFlorian Westphal
commit 524b698db06b9b6da7192e749f637904e2f62d7b upstream. Instead of breaking loop and instant resched, don't bother checking this in first place (the loop calls cond_resched for every bucket anyway). Suggested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26netfilter: nf_ct_helper: warn when not applying default helper assignmentJiri Kosina
commit dfe75ff8ca74f54b0fa5a326a1aa9afa485ed802 upstream. Commit 3bb398d925 ("netfilter: nf_ct_helper: disable automatic helper assignment") is causing behavior regressions in firewalls, as traffic handled by conntrack helpers is now by default not passed through even though it was before due to missing CT targets (which were not necessary before this commit). The default had to be switched off due to security reasons [1] [2] and therefore should stay the way it is, but let's be friendly to firewall admins and issue a warning the first time we're in situation where packet would be likely passed through with the old default but we're likely going to drop it on the floor now. Rewrite the code a little bit as suggested by Linus, so that we avoid spaghettiing the code even more -- namely the whole decision making process regarding helper selection (either automatic or not) is being separated, so that the whole logic can be simplified and code (condition) duplication reduced. [1] https://cansecwest.com/csw12/conntrack-attack.pdf [2] https://home.regit.org/netfilter-en/secure-use-of-helpers/ Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-24netfilter: nft_range: add the missing NULL pointer checkLiping Zhang
Otherwise, kernel panic will happen if the user does not specify the related attributes. Fixes: 0f3cd9b36977 ("netfilter: nf_tables: add range expression") Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-11-24netfilter: nf_tables: fix inconsistent element expiration calculationAnders K. Pedersen
As Liping Zhang reports, after commit a8b1e36d0d1d ("netfilter: nft_dynset: fix element timeout for HZ != 1000"), priv->timeout was stored in jiffies, while set->timeout was stored in milliseconds. This is inconsistent and incorrect. Firstly, we already call msecs_to_jiffies in nft_set_elem_init, so priv->timeout will be converted to jiffies twice. Secondly, if the user did not specify the NFTA_DYNSET_TIMEOUT attr, set->timeout will be used, but we forget to call msecs_to_jiffies when do update elements. Fix this by using jiffies internally for traditional sets and doing the conversions to/from msec when interacting with userspace - as dynset already does. This is preferable to doing the conversions, when elements are inserted or updated, because this can happen very frequently on busy dynsets. Fixes: a8b1e36d0d1d ("netfilter: nft_dynset: fix element timeout for HZ != 1000") Reported-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Anders K. Pedersen <akp@cohaesio.com> Acked-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-11-24netfilter: nat: switch to new rhlist interfaceFlorian Westphal
I got offlist bug report about failing connections and high cpu usage. This happens because we hit 'elasticity' checks in rhashtable that refuses bucket list exceeding 16 entries. The nat bysrc hash unfortunately needs to insert distinct objects that share same key and are identical (have same source tuple), this cannot be avoided. Switch to the rhlist interface which is designed for this. The nulls_base is removed here, I don't think its needed: A (unlikely) false positive results in unneeded port clash resolution, a false negative results in packet drop during conntrack confirmation, when we try to insert the duplicate into main conntrack hash table. Tested by adding multiple ip addresses to host, then adding iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE ... and then creating multiple connections, from same source port but different addresses: for i in $(seq 2000 2032);do nc -p 1234 192.168.7.1 $i > /dev/null & done (all of these then get hashed to same bysource slot) Then, to test that nat conflict resultion is working: nc -s 10.0.0.1 -p 1234 192.168.7.1 2000 nc -s 10.0.0.2 -p 1234 192.168.7.1 2000 tcp .. src=10.0.0.1 dst=192.168.7.1 sport=1234 dport=2000 src=192.168.7.1 dst=192.168.7.10 sport=2000 dport=1024 [ASSURED] tcp .. src=10.0.0.2 dst=192.168.7.1 sport=1234 dport=2000 src=192.168.7.1 dst=192.168.7.10 sport=2000 dport=1025 [ASSURED] tcp .. src=192.168.7.10 dst=192.168.7.1 sport=1234 dport=2000 src=192.168.7.1 dst=192.168.7.10 sport=2000 dport=1234 [ASSURED] tcp .. src=192.168.7.10 dst=192.168.7.1 sport=1234 dport=2001 src=192.168.7.1 dst=192.168.7.10 sport=2001 dport=1234 [ASSURED] [..] -> nat altered source ports to 1024 and 1025, respectively. This can also be confirmed on destination host which shows ESTAB 0 0 192.168.7.1:2000 192.168.7.10:1024 ESTAB 0 0 192.168.7.1:2000 192.168.7.10:1025 ESTAB 0 0 192.168.7.1:2000 192.168.7.10:1234 Cc: Herbert Xu <herbert@gondor.apana.org.au> Fixes: 870190a9ec907 ("netfilter: nat: convert nat bysrc hash to rhashtable") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-11-24netfilter: nat: fix cmp return valueFlorian Westphal
The comparator works like memcmp, i.e. 0 means objects are equal. In other words, when objects are distinct they are treated as identical, when they are distinct they are allegedly the same. The first case is rare (distinct objects are unlikely to get hashed to same bucket). The second case results in unneeded port conflict resolutions attempts. Fixes: 870190a9ec907 ("netfilter: nat: convert nat bysrc hash to rhashtable") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-11-24netfilter: nft_hash: validate maximum value of u32 netlink hash attributeLaura Garcia Liebana
Use the function nft_parse_u32_check() to fetch the value and validate the u32 attribute into the hash len u8 field. This patch revisits 4da449ae1df9 ("netfilter: nft_exthdr: Add size check on u8 nft_exthdr attributes"). Fixes: cb1b69b0b15b ("netfilter: nf_tables: add hash expression") Signed-off-by: Laura Garcia Liebana <nevola@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-11-08netfilter: nf_tables: fix oops when inserting an element into a verdict mapLiping Zhang
Dalegaard says: The following ruleset, when loaded with 'nft -f bad.txt' ----snip---- flush ruleset table ip inlinenat { map sourcemap { type ipv4_addr : verdict; } chain postrouting { ip saddr vmap @sourcemap accept } } add chain inlinenat test add element inlinenat sourcemap { 100.123.10.2 : jump test } ----snip---- results in a kernel oops: BUG: unable to handle kernel paging request at 0000000000001344 IP: [<ffffffffa07bf704>] nf_tables_check_loops+0x114/0x1f0 [nf_tables] [...] Call Trace: [<ffffffffa07c2aae>] ? nft_data_init+0x13e/0x1a0 [nf_tables] [<ffffffffa07c1950>] nft_validate_register_store+0x60/0xb0 [nf_tables] [<ffffffffa07c74b5>] nft_add_set_elem+0x545/0x5e0 [nf_tables] [<ffffffffa07bfdd0>] ? nft_table_lookup+0x30/0x60 [nf_tables] [<ffffffff8132c630>] ? nla_strcmp+0x40/0x50 [<ffffffffa07c766e>] nf_tables_newsetelem+0x11e/0x210 [nf_tables] [<ffffffff8132c400>] ? nla_validate+0x60/0x80 [<ffffffffa030d9b4>] nfnetlink_rcv+0x354/0x5a7 [nfnetlink] Because we forget to fill the net pointer in bind_ctx, so dereferencing it may cause kernel crash. Reported-by: Dalegaard <dalegaard@gmail.com> Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-22 02:34:37 +0000