summaryrefslogtreecommitdiff
path: root/mm
AgeCommit message (Collapse)Author
2014-09-05mm: memcontrol: revert use of root_mem_cgroup res_counterJohannes Weiner
Dave Hansen reports a massive scalability regression in an uncontained page fault benchmark with more than 30 concurrent threads, which he bisected down to 05b843012335 ("mm: memcontrol: use root_mem_cgroup res_counter") and pin-pointed on res_counter spinlock contention. That change relied on the per-cpu charge caches to mostly swallow the res_counter costs, but it's apparent that the caches don't scale yet. Revert memcg back to bypassing res_counters on the root level in order to restore performance for uncontained workloads. Reported-by: Dave Hansen <dave@sr71.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Tested-by: Dave Hansen <dave.hansen@intel.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-29x86,mm: fix pte_special versus pte_numaHugh Dickins
Sasha Levin has shown oopses on ffffea0003480048 and ffffea0003480008 at mm/memory.c:1132, running Trinity on different 3.16-rc-next kernels: where zap_pte_range() checks page->mapping to see if PageAnon(page). Those addresses fit struct pages for pfns d2001 and d2000, and in each dump a register or a stack slot showed d2001730 or d2000730: pte flags 0x730 are PCD ACCESSED PROTNONE SPECIAL IOMAP; and Sasha's e820 map has a hole between cfffffff and 100000000, which would need special access. Commit c46a7c817e66 ("x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels") has broken vm_normal_page(): a PROTNONE SPECIAL pte no longer passes the pte_special() test, so zap_pte_range() goes on to try to access a non-existent struct page. Fix this by refining pte_special() (SPECIAL with PRESENT or PROTNONE) to complement pte_numa() (SPECIAL with neither PRESENT nor PROTNONE). A hint that this was a problem was that c46a7c817e66 added pte_numa() test to vm_normal_page(), and moved its is_zero_pfn() test from slow to fast path: This was papering over a pte_special() snag when the zero page was encountered during zap. This patch reverts vm_normal_page() to how it was before, relying on pte_special(). It still appears that this patch may be incomplete: aren't there other places which need to be handling PROTNONE along with PRESENT? For example, pte_mknuma() clears _PAGE_PRESENT and sets _PAGE_NUMA, but on a PROT_NONE area, that would make it pte_special(). This is side-stepped by the fact that NUMA hinting faults skipped PROT_NONE VMAs and there are no grounds where a NUMA hinting fault on a PROT_NONE VMA would be interesting. Fixes: c46a7c817e66 ("x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels") Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: <stable@vger.kernel.org> [3.16] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-29hugetlb_cgroup: use lockdep_assert_held rather than spin_is_lockedMichal Hocko
spin_lock may be an empty struct for !SMP configurations and so arch_spin_is_locked may return unconditional 0 and trigger the VM_BUG_ON even when the lock is held. Replace spin_is_locked by lockdep_assert_held. We will not BUG anymore but it is questionable whether crashing makes a lot of sense in the uncharge path. Uncharge happens after the last page reference was released so nobody should touch the page and the function doesn't update any shared state except for res counter which uses synchronization of its own. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-29mm/zpool: use prefixed module loadingKees Cook
To avoid potential format string expansion via module parameters, do not use the zpool type directly in request_module() without a format string. Additionally, to avoid arbitrary modules being loaded via zpool API (e.g. via the zswap_zpool_type module parameter) add a "zpool-" prefix to the requested module, as well as module aliases for the existing zpool types (zbud and zsmalloc). Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Acked-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-29mm: actually clear pmd_numa before invalidatingMatthew Wilcox
Commit 67f87463d3a3 ("mm: clear pmd_numa before invalidating") cleared the NUMA bit in a copy of the PMD entry, but then wrote back the original Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-29memblock, memhotplug: fix wrong type in memblock_find_in_range_node().Tang Chen
In memblock_find_in_range_node(), we defined ret as int. But it should be phys_addr_t because it is used to store the return value from __memblock_find_range_bottom_up(). The bug has not been triggered because when allocating low memory near the kernel end, the "int ret" won't turn out to be negative. When we started to allocate memory on other nodes, and the "int ret" could be minus. Then the kernel will panic. A simple way to reproduce this: comment out the following code in numa_init(), memblock_set_bottom_up(false); and the kernel won't boot. Reported-by: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Tested-by: Xishi Qiu <qiuxishi@huawei.com> Cc: <stable@vger.kernel.org> [3.13+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-14Merge branch 'akpm' (fixes from Andrew Morton)Linus Torvalds
Merge leftovers from Andrew Morton: "A few leftovers. I have a bunch of OCFS2 patches which are still out for review and which I might sneak along after -rc1. Partly my fault - I should send my review pokes out earlier" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: fix CROSS_MEMORY_ATTACH help text grammar drivers/mfd/rtsx_usb.c: export device table mm, hugetlb_cgroup: align hugetlb cgroup limit to hugepage size
2014-08-14mm, hugetlb_cgroup: align hugetlb cgroup limit to hugepage sizeDavid Rientjes
Memcg aligns memory.limit_in_bytes to PAGE_SIZE as part of the resource counter since it makes no sense to allow a partial page to be charged. As a result of the hugetlb cgroup using the resource counter, it is also aligned to PAGE_SIZE but makes no sense unless aligned to the size of the hugepage being limited. Align hugetlb cgroup limit to hugepage size. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "Stuff in here: - acct.c fixes and general rework of mnt_pin mechanism. That allows to go for delayed-mntput stuff, which will permit mntput() on deep stack without worrying about stack overflows - fs shutdown will happen on shallow stack. IOW, we can do Eric's umount-on-rmdir series without introducing tons of stack overflows on new mntput() call chains it introduces. - Bruce's d_splice_alias() patches - more Miklos' rename() stuff. - a couple of regression fixes (stable fodder, in the end of branch) and a fix for API idiocy in iov_iter.c. There definitely will be another pile, maybe even two. I'd like to get Eric's series in this time, but even if we miss it, it'll go right in the beginning of for-next in the next cycle - the tricky part of prereqs is in this pile" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits) fix copy_tree() regression __generic_file_write_iter(): fix handling of sync error after DIO switch iov_iter_get_pages() to passing maximal number of pages fs: mark __d_obtain_alias static dcache: d_splice_alias should detect loops exportfs: update Exporting documentation dcache: d_find_alias needn't recheck IS_ROOT && DCACHE_DISCONNECTED dcache: remove unused d_find_alias parameter dcache: d_obtain_alias callers don't all want DISCONNECTED dcache: d_splice_alias should ignore DCACHE_DISCONNECTED dcache: d_splice_alias mustn't create directory aliases dcache: close d_move race in d_splice_alias dcache: move d_splice_alias namei: trivial fix to vfs_rename_dir comment VFS: allow ->d_manage() to declare -EISDIR in rcu_walk mode. cifs: support RENAME_NOREPLACE hostfs: support rename flags shmem: support RENAME_EXCHANGE shmem: support RENAME_NOREPLACE btrfs: add RENAME_NOREPLACE ...
2014-08-11__generic_file_write_iter(): fix handling of sync error after DIOAl Viro
If DIO results in short write and sync write fails, we want to bugger off whether the DIO part has written anything or not; the logics on the return will take care of the right return value. Cc: stable@vger.kernel.org [3.16] Reported-by: Anton Altaparmakov <aia21@cam.ac.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-08-08shm: wait for pins to be released when sealingDavid Herrmann
If we set SEAL_WRITE on a file, we must make sure there cannot be any ongoing write-operations on the file. For write() calls, we simply lock the inode mutex, for mmap() we simply verify there're no writable mappings. However, there might be pages pinned by AIO, Direct-IO and similar operations via GUP. We must make sure those do not write to the memfd file after we set SEAL_WRITE. As there is no way to notify GUP users to drop pages or to wait for them to be done, we implement the wait ourself: When setting SEAL_WRITE, we check all pages for their ref-count. If it's bigger than 1, we know there's some user of the page. We then mark the page and wait for up to 150ms for those ref-counts to be dropped. If the ref-counts are not dropped in time, we refuse the seal operation. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08shm: add memfd_create() syscallDavid Herrmann
memfd_create() is similar to mmap(MAP_ANON), but returns a file-descriptor that you can pass to mmap(). It can support sealing and avoids any connection to user-visible mount-points. Thus, it's not subject to quotas on mounted file-systems, but can be used like malloc()'ed memory, but with a file-descriptor to it. memfd_create() returns the raw shmem file, so calls like ftruncate() can be used to modify the underlying inode. Also calls like fstat() will return proper information and mark the file as regular file. If you want sealing, you can specify MFD_ALLOW_SEALING. Otherwise, sealing is not supported (like on all other regular files). Compared to O_TMPFILE, it does not require a tmpfs mount-point and is not subject to a filesystem size limit. It is still properly accounted to memcg limits, though, and to the same overcommit or no-overcommit accounting as all user memory. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08shm: add sealing APIDavid Herrmann
If two processes share a common memory region, they usually want some guarantees to allow safe access. This often includes: - one side cannot overwrite data while the other reads it - one side cannot shrink the buffer while the other accesses it - one side cannot grow the buffer beyond previously set boundaries If there is a trust-relationship between both parties, there is no need for policy enforcement. However, if there's no trust relationship (eg., for general-purpose IPC) sharing memory-regions is highly fragile and often not possible without local copies. Look at the following two use-cases: 1) A graphics client wants to share its rendering-buffer with a graphics-server. The memory-region is allocated by the client for read/write access and a second FD is passed to the server. While scanning out from the memory region, the server has no guarantee that the client doesn't shrink the buffer at any time, requiring rather cumbersome SIGBUS handling. 2) A process wants to perform an RPC on another process. To avoid huge bandwidth consumption, zero-copy is preferred. After a message is assembled in-memory and a FD is passed to the remote side, both sides want to be sure that neither modifies this shared copy, anymore. The source may have put sensible data into the message without a separate copy and the target may want to parse the message inline, to avoid a local copy. While SIGBUS handling, POSIX mandatory locking and MAP_DENYWRITE provide ways to achieve most of this, the first one is unproportionally ugly to use in libraries and the latter two are broken/racy or even disabled due to denial of service attacks. This patch introduces the concept of SEALING. If you seal a file, a specific set of operations is blocked on that file forever. Unlike locks, seals can only be set, never removed. Hence, once you verified a specific set of seals is set, you're guaranteed that no-one can perform the blocked operations on this file, anymore. An initial set of SEALS is introduced by this patch: - SHRINK: If SEAL_SHRINK is set, the file in question cannot be reduced in size. This affects ftruncate() and open(O_TRUNC). - GROW: If SEAL_GROW is set, the file in question cannot be increased in size. This affects ftruncate(), fallocate() and write(). - WRITE: If SEAL_WRITE is set, no write operations (besides resizing) are possible. This affects fallocate(PUNCH_HOLE), mmap() and write(). - SEAL: If SEAL_SEAL is set, no further seals can be added to a file. This basically prevents the F_ADD_SEAL operation on a file and can be set to prevent others from adding further seals that you don't want. The described use-cases can easily use these seals to provide safe use without any trust-relationship: 1) The graphics server can verify that a passed file-descriptor has SEAL_SHRINK set. This allows safe scanout, while the client is allowed to increase buffer size for window-resizing on-the-fly. Concurrent writes are explicitly allowed. 2) For general-purpose IPC, both processes can verify that SEAL_SHRINK, SEAL_GROW and SEAL_WRITE are set. This guarantees that neither process can modify the data while the other side parses it. Furthermore, it guarantees that even with writable FDs passed to the peer, it cannot increase the size to hit memory-limits of the source process (in case the file-storage is accounted to the source). The new API is an extension to fcntl(), adding two new commands: F_GET_SEALS: Return a bitset describing the seals on the file. This can be called on any FD if the underlying file supports sealing. F_ADD_SEALS: Change the seals of a given file. This requires WRITE access to the file and F_SEAL_SEAL may not already be set. Furthermore, the underlying file must support sealing and there may not be any existing shared mapping of that file. Otherwise, EBADF/EPERM is returned. The given seals are _added_ to the existing set of seals on the file. You cannot remove seals again. The fcntl() handler is currently specific to shmem and disabled on all files. A file needs to explicitly support sealing for this interface to work. A separate syscall is added in a follow-up, which creates files that support sealing. There is no intention to support this on other file-systems. Semantics are unclear for non-volatile files and we lack any use-case right now. Therefore, the implementation is specific to shmem. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08mm: allow drivers to prevent new writable mappingsDavid Herrmann
This patch (of 6): The i_mmap_writable field counts existing writable mappings of an address_space. To allow drivers to prevent new writable mappings, make this counter signed and prevent new writable mappings if it is negative. This is modelled after i_writecount and DENYWRITE. This will be required by the shmem-sealing infrastructure to prevent any new writable mappings after the WRITE seal has been set. In case there exists a writable mapping, this operation will fail with EBUSY. Note that we rely on the fact that iff you already own a writable mapping, you can increase the counter without using the helpers. This is the same that we do for i_writecount. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08arm64,ia64,ppc,s390,sh,tile,um,x86,mm: remove default gate areaAndy Lutomirski
The core mm code will provide a default gate area based on FIXADDR_USER_START and FIXADDR_USER_END if !defined(__HAVE_ARCH_GATE_AREA) && defined(AT_SYSINFO_EHDR). This default is only useful for ia64. arm64, ppc, s390, sh, tile, 64-bit UML, and x86_32 have their own code just to disable it. arm, 32-bit UML, and x86_64 have gate areas, but they have their own implementations. This gets rid of the default and moves the code into ia64. This should save some code on architectures without a gate area: it's now possible to inline the gate_area functions in the default case. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Nathan Lynch <nathan_lynch@mentor.com> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [in principle] Acked-by: Richard Weinberger <richard@nod.at> [for um] Acked-by: Will Deacon <will.deacon@arm.com> [for arm64] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Nathan Lynch <Nathan_Lynch@mentor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08mm/zswap.c: add __init to zswap_entry_cache_destroy()Fabian Frederick
zswap_entry_cache_destroy() is only called by __init init_zswap(). This patch also fixes function name zswap_entry_cache_ s/destory/destroy Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Seth Jennings <sjennings@variantweb.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08mm: memcontrol: avoid charge statistics churn during page migrationJohannes Weiner
Charge migration currently disables IRQs twice to update the charge statistics for the old page and then again for the new page. But migration is a seamless transition of a charge from one physical page to another one of the same size, so this should be a non-event from an accounting point of view. Leave the statistics alone. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08mm: memcontrol: use page lists for uncharge batchingJohannes Weiner
Pages are now uncharged at release time, and all sources of batched uncharges operate on lists of pages. Directly use those lists, and get rid of the per-task batching state. This also batches statistics accounting, in addition to the res counter charges, to reduce IRQ-disabling and re-enabling. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08mm: memcontrol: rewrite uncharge APIJohannes Weiner
The memcg uncharging code that is involved towards the end of a page's lifetime - truncation, reclaim, swapout, migration - is impressively complicated and fragile. Because anonymous and file pages were always charged before they had their page->mapping established, uncharges had to happen when the page type could still be known from the context; as in unmap for anonymous, page cache removal for file and shmem pages, and swap cache truncation for swap pages. However, these operations happen well before the page is actually freed, and so a lot of synchronization is necessary: - Charging, uncharging, page migration, and charge migration all need to take a per-page bit spinlock as they could race with uncharging. - Swap cache truncation happens during both swap-in and swap-out, and possibly repeatedly before the page is actually freed. This means that the memcg swapout code is called from many contexts that make no sense and it has to figure out the direction from page state to make sure memory and memory+swap are always correctly charged. - On page migration, the old page might be unmapped but then reused, so memcg code has to prevent untimely uncharging in that case. Because this code - which should be a simple charge transfer - is so special-cased, it is not reusable for replace_page_cache(). But now that charged pages always have a page->mapping, introduce mem_cgroup_uncharge(), which is called after the final put_page(), when we know for sure that nobody is looking at the page anymore. For page migration, introduce mem_cgroup_migrate(), which is called after the migration is successful and the new page is fully rmapped. Because the old page is no longer uncharged after migration, prevent double charges by decoupling the page's memcg association (PCG_USED and pc->mem_cgroup) from the page holding an actual charge. The new bits PCG_MEM and PCG_MEMSW represent the respective charges and are transferred to the new page during migration. mem_cgroup_migrate() is suitable for replace_page_cache() as well, which gets rid of mem_cgroup_replace_page_cache(). However, care needs to be taken because both the source and the target page can already be charged and on the LRU when fuse is splicing: grab the page lock on the charge moving side to prevent changing pc->mem_cgroup of a page under migration. Also, the lruvecs of both pages change as we uncharge the old and charge the new during migration, and putback may race with us, so grab the lru lock and isolate the pages iff on LRU to prevent races and ensure the pages are on the right lruvec afterward. Swap accounting is massively simplified: because the page is no longer uncharged as early as swap cache deletion, a new mem_cgroup_swapout() can transfer the page's memory+swap charge (PCG_MEMSW) to the swap entry before the final put_page() in page reclaim. Finally, page_cgroup changes are now protected by whatever protection the page itself offers: anonymous pages are charged under the page table lock, whereas page cache insertions, swapin, and migration hold the page lock. Uncharging happens under full exclusion with no outstanding references. Charging and uncharging also ensure that the page is off-LRU, which serializes against charge migration. Remove the very costly page_cgroup lock and set pc->flags non-atomically. [mhocko@suse.cz: mem_cgroup_charge_statistics needs preempt_disable] [vdavydov@parallels.com: fix flags definition] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Tested-by: Jet Chen <jet.chen@intel.com> Acked-by: Michal Hocko <mhocko@suse.cz> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08mm: memcontrol: rewrite charge APIJohannes Weiner
These patches rework memcg charge lifetime to integrate more naturally with the lifetime of user pages. This drastically simplifies the code and reduces charging and uncharging overhead. The most expensive part of charging and uncharging is the page_cgroup bit spinlock, which is removed entirely after this series. Here are the top-10 profile entries of a stress test that reads a 128G sparse file on a freshly booted box, without even a dedicated cgroup (i.e. executing in the root memcg). Before: 15.36% cat [kernel.kallsyms] [k] copy_user_generic_string 13.31% cat [kernel.kallsyms] [k] memset 11.48% cat [kernel.kallsyms] [k] do_mpage_readpage 4.23% cat [kernel.kallsyms] [k] get_page_from_freelist 2.38% cat [kernel.kallsyms] [k] put_page 2.32% cat [kernel.kallsyms] [k] __mem_cgroup_commit_charge 2.18% kswapd0 [kernel.kallsyms] [k] __mem_cgroup_uncharge_common 1.92% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.86% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.62% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn After: 15.67% cat [kernel.kallsyms] [k] copy_user_generic_string 13.48% cat [kernel.kallsyms] [k] memset 11.42% cat [kernel.kallsyms] [k] do_mpage_readpage 3.98% cat [kernel.kallsyms] [k] get_page_from_freelist 2.46% cat [kernel.kallsyms] [k] put_page 2.13% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.88% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.67% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn 1.39% kswapd0 [kernel.kallsyms] [k] free_pcppages_bulk 1.30% cat [kernel.kallsyms] [k] kfree As you can see, the memcg footprint has shrunk quite a bit. text data bss dec hex filename 37970 9892 400 48262 bc86 mm/memcontrol.o.old 35239 9892 400 45531 b1db mm/memcontrol.o This patch (of 4): The memcg charge API charges pages before they are rmapped - i.e. have an actual "type" - and so every callsite needs its own set of charge and uncharge functions to know what type is being operated on. Worse, uncharge has to happen from a context that is still type-specific, rather than at the end of the page's lifetime with exclusive access, and so requires a lot of synchronization. Rewrite the charge API to provide a generic set of try_charge(), commit_charge() and cancel_charge() transaction operations, much like what's currently done for swap-in: mem_cgroup_try_charge() attempts to reserve a charge, reclaiming pages from the memcg if necessary. mem_cgroup_commit_charge() commits the page to the charge once it has a valid page->mapping and PageAnon() reliably tells the type. mem_cgroup_cancel_charge() aborts the transaction. This reduces the charge API and enables subsequent patches to drastically simplify uncharging. As pages need to be committed after rmap is established but before they are added to the LRU, page_add_new_anon_rmap() must stop doing LRU additions again. Revive lru_cache_add_active_or_unevictable(). [hughd@google.com: fix shmem_unuse] [hughd@google.com: Add comments on the private use of -EAGAIN] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08vm_is_stack: use for_each_thread() rather then buggy while_each_thread()Oleg Nesterov
Aleksei hit the soft lockup during reading /proc/PID/smaps. David investigated the problem and suggested the right fix. while_each_thread() is racy and should die, this patch updates vm_is_stack(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Aleksei Besogonov <alex.besogonov@gmail.com> Tested-by: Aleksei Besogonov <alex.besogonov@gmail.com> Suggested-by: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08Revert "slab: remove BAD_ALIEN_MAGIC"Joonsoo Kim
This reverts commit a640616822b2 ("slab: remove BAD_ALIEN_MAGIC"). commit a640616822b2 ("slab: remove BAD_ALIEN_MAGIC") assumes that the system with !CONFIG_NUMA has only one memory node. But, it turns out to be false by the report from Geert. His system, m68k, has many memory nodes and is configured in !CONFIG_NUMA. So it couldn't boot with above change. Here goes his failure report. With latest mainline, I'm getting a crash during bootup on m68k/ARAnyM: enable_cpucache failed for radix_tree_node, error 12. kernel BUG at /scratch/geert/linux/linux-m68k/mm/slab.c:1522! *** TRAP #7 *** FORMAT=0 Current process id is 0 BAD KERNEL TRAP: 00000000 Modules linked in: PC: [<0039c92c>] kmem_cache_init_late+0x70/0x8c SR: 2200 SP: 00345f90 a2: 0034c2e8 d0: 0000003d d1: 00000000 d2: 00000000 d3: 003ac942 d4: 00000000 d5: 00000000 a0: 0034f686 a1: 0034f682 Process swapper (pid: 0, task=0034c2e8) Frame format=0 Stack from 00345fc4: 002f69ef 002ff7e5 000005f2 000360fa 0017d806 003921d4 00000000 00000000 00000000 00000000 00000000 00000000 003ac942 00000000 003912d6 Call Trace: [<000360fa>] parse_args+0x0/0x2ca [<0017d806>] strlen+0x0/0x1a [<003921d4>] start_kernel+0x23c/0x428 [<003912d6>] _sinittext+0x2d6/0x95e Code: f7e5 4879 002f 69ef 61ff ffca 462a 4e47 <4879> 0035 4b1c 61ff fff0 0cc4 7005 23c0 0037 fd20 588f 265f 285f 4e75 48e7 301c Disabling lock debugging due to kernel taint Kernel panic - not syncing: Attempted to kill the idle task! Although there is a alternative way to fix this issue such as disabling use of alien cache on !CONFIG_NUMA, but, reverting issued commit is better to me in this time. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07switch iov_iter_get_pages() to passing maximal number of pagesAl Viro
... instead of maximal size. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-08-07shmem: support RENAME_EXCHANGEMiklos Szeredi
This is really simple in tmpfs since the VFS already takes care of shuffling the dentries. Just adjust nlink on parent directories and touch c & mtimes. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Hugh Dickins <hughd@google.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-08-07shmem: support RENAME_NOREPLACEMiklos Szeredi
Implement ->rename2 instead of ->rename. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Hugh Dickins <hughd@google.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-08-06mm/zpool: update zswap to use zpoolDan Streetman
Change zswap to use the zpool api instead of directly using zbud. Add a boot-time param to allow selecting which zpool implementation to use, with zbud as the default. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Tested-by: Seth Jennings <sjennings@variantweb.net> Cc: Weijie Yang <weijie.yang@samsung.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mm/zpool: zbud/zsmalloc implement zpoolDan Streetman
Update zbud and zsmalloc to implement the zpool api. [fengguang.wu@intel.com: make functions static] Signed-off-by: Dan Streetman <ddstreet@ieee.org> Tested-by: Seth Jennings <sjennings@variantweb.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Weijie Yang <weijie.yang@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mm/zpool: implement common zpool api to zbud/zsmallocDan Streetman
Add zpool api. zpool provides an interface for memory storage, typically of compressed memory. Users can select what backend to use; currently the only implementations are zbud, a low density implementation with up to two compressed pages per storage page, and zsmalloc, a higher density implementation with multiple compressed pages per storage page. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Tested-by: Seth Jennings <sjennings@variantweb.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Weijie Yang <weijie.yang@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mm/zbud: change zbud_alloc size type to size_tDan Streetman
Change the type of the zbud_alloc() size param from unsigned int to size_t. Technically, this should not make any difference, as the zbud implementation already restricts the size to well within either type's limits; but as zsmalloc (and kmalloc) use size_t, and zpool will use size_t, this brings the size parameter type in line with zsmalloc/zpool. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Seth Jennings <sjennings@variantweb.net> Tested-by: Seth Jennings <sjennings@variantweb.net> Cc: Weijie Yang <weijie.yang@samsung.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mm/highmem: make kmap cache coloring awareMax Filippov
User-visible effect: Architectures that choose this method of maintaining cache coherency (MIPS and xtensa currently) are able to use high memory on cores with aliasing data cache. Without this fix such architectures can not use high memory (in case of xtensa it means that at most 128 MBytes of physical memory is available). The problem: VIPT cache with way size larger than MMU page size may suffer from aliasing problem: a single physical address accessed via different virtual addresses may end up in multiple locations in the cache. Virtual mappings of a physical address that always get cached in different cache locations are said to have different colors. L1 caching hardware usually doesn't handle this situation leaving it up to software. Software must avoid this situation as it leads to data corruption. What can be done: One way to handle this is to flush and invalidate data cache every time page mapping changes color. The other way is to always map physical page at a virtual address with the same color. Low memory pages already have this property. Giving architecture a way to control color of high memory page mapping allows reusing of existing low memory cache alias handling code. How this is done with this patch: Provide hooks that allow architectures with aliasing cache to align mapping address of high pages according to their color. Such architectures may enforce similar coloring of low- and high-memory page mappings and reuse existing cache management functions to support highmem. This code is based on the implementation of similar feature for MIPS by Leonid Yegoshin. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Chris Zankel <chris@zankel.net> Cc: Marc Gauthier <marc@cadence.com> Cc: David Rientjes <rientjes@google.com> Cc: Steven Hill <Steven.Hill@imgtec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mmu_notifier: add call_srcu and sync function for listener to delay call and ↵Peter Zijlstra
sync When kernel device drivers or subsystems want to bind their lifespan to t= he lifespan of the mm_struct, they usually use one of the following methods: 1. Manually calling a function in the interested kernel module. The funct= ion call needs to be placed in mmput. This method was rejected by several ker= nel maintainers. 2. Registering to the mmu notifier release mechanism. The problem with the latter approach is that the mmu_notifier_release cal= lback is called from__mmu_notifier_release (called from exit_mmap). That functi= on iterates over the list of mmu notifiers and don't expect the release call= back function to remove itself from the list. Therefore, the callback function= in the kernel module can't release the mmu_notifier_object, which is actuall= y the kernel module's object itself. As a result, the destruction of the kernel module's object must to be done in a delayed fashion. This patch adds support for this delayed callback, by adding a new mmu_notifier_call_srcu function that receives a function ptr and calls th= at function with call_srcu. In that function, the kernel module releases its object. To use mmu_notifier_call_srcu, the calling module needs to call b= efore that a new function called mmu_notifier_unregister_no_release that as its= name implies, unregisters a notifier without calling its notifier release call= back. This patch also adds a function that will call barrier_srcu so those kern= el modules can sync with mmu_notifier. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Oded Gabbay <oded.gabbay@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mm: memcontrol: clean up reclaim size variable use in try_charge()Johannes Weiner
Charge reclaim and OOM currently use the charge batch variable, but batching is already disabled at that point. To simplify the charge logic, the batch variable is reset to the original request size when reclaim is entered, so it's functionally equal, but it's misleading. Switch reclaim/OOM to nr_pages, which is the original request size. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mm: change confusing #ifdef use in __access_remote_vmRik van Riel
This patch changes confusing #ifdef use in __access_remote_vm into merely ugly #ifdef use. Addresses bug https://bugzilla.kernel.org/show_bug.cgi?id=81651 Signed-off-by: Rik van Riel <riel@redhat.com> Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mm: mark fault_around_bytes __read_mostlyKirill A. Shutemov
fault_around_bytes can only be changed via debugfs. Let's mark it read-mostly. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Suggested-by: David Rientjes <rientjes@google.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mm: close race between do_fault_around() and fault_around_bytes_set()Kirill A. Shutemov
Things can go wrong if fault_around_bytes will be changed under do_fault_around(): between fault_around_mask() and fault_around_pages(). Let's read fault_around_bytes only once during do_fault_around() and calculate mask based on the reading. Note: fault_around_bytes can only be updated via debug interface. Also I've tried but was not able to trigger a bad behaviour without the patch. So I would not consider this patch as urgent. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06memcg, vmscan: Fix forced scan of anonymous pagesJerome Marchand
When memory cgoups are enabled, the code that decides to force to scan anonymous pages in get_scan_count() compares global values (free, high_watermark) to a value that is restricted to a memory cgroup (file). It make the code over-eager to force anon scan. For instance, it will force anon scan when scanning a memcg that is mainly populated by anonymous page, even when there is plenty of file pages to get rid of in others memcgs, even when swappiness == 0. It breaks user's expectation about swappiness and hurts performance. This patch makes sure that forced anon scan only happens when there not enough file pages for the all zone, not just in one random memcg. [hannes@cmpxchg.org: cleanups] Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mm, vmscan: fix an outdated comment still mentioning get_scan_ratioJerome Marchand
Quite a while ago, get_scan_ratio() has been renamed get_scan_count(), however a comment in shrink_active_list() still mention it. This patch fixes the outdated comment. Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mm, oom: remove unnecessary exit_state checkDavid Rientjes
The oom killer scans each process and determines whether it is eligible for oom kill or whether the oom killer should abort because of concurrent memory freeing. It will abort when an eligible process is found to have TIF_MEMDIE set, meaning it has already been oom killed and we're waiting for it to exit. Processes with task->mm == NULL should not be considered because they are either kthreads or have already detached their memory and killing them would not lead to memory freeing. That memory is only freed after exit_mm() has returned, however, and not when task->mm is first set to NULL. Clear TIF_MEMDIE after exit_mm()'s mmput() so that an oom killed process is no longer considered for oom kill, but only until exit_mm() has returned. This was fragile in the past because it relied on exit_notify() to be reached before no longer considering TIF_MEMDIE processes. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mm: fix potential infinite loop in dissolve_free_huge_pages()Li Zhong
It is possible for some platforms, such as powerpc to set HPAGE_SHIFT to 0 to indicate huge pages not supported. When this is the case, hugetlbfs could be disabled during boot time: hugetlbfs: disabling because there are no supported hugepage sizes Then in dissolve_free_huge_pages(), order is kept maximum (64 for 64bits), and the for loop below won't end: for (pfn = start_pfn; pfn < end_pfn; pfn += 1 << order) As suggested by Naoya, below fix checks hugepages_supported() before calling dissolve_free_huge_pages(). [rientjes@google.com: no legitimate reason to call dissolve_free_huge_pages() when !hugepages_supported()] Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mm, thp: restructure thp avoidance of light synchronous migrationDavid Rientjes
__GFP_NO_KSWAPD, once the way to determine if an allocation was for thp or not, has gained more users. Their use is not necessarily wrong, they are trying to do a memory allocation that can easily fail without disturbing kswapd, so the bit has gained additional usecases. This restructures the check to determine whether MIGRATE_SYNC_LIGHT should be used for memory compaction in the page allocator. Rather than testing solely for __GFP_NO_KSWAPD, test for all bits that must be set for thp allocations. This also moves the check to be done only after the page allocator is aborted for deferred or contended memory compaction since setting migration_mode for this case is pointless. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mm, oom: rename zonelist locking functionsDavid Rientjes
try_set_zonelist_oom() and clear_zonelist_oom() are not named properly to imply that they require locking semantics to avoid out_of_memory() being reordered. zone_scan_lock is required for both functions to ensure that there is proper locking synchronization. Rename try_set_zonelist_oom() to oom_zonelist_trylock() and rename clear_zonelist_oom() to oom_zonelist_unlock() to imply there is proper locking semantics. At the same time, convert oom_zonelist_trylock() to return bool instead of int since only success and failure are tested. Signed-off-by: David Rientjes <rientjes@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mm, oom: ensure memoryless node zonelist always includes zonesDavid Rientjes
With memoryless node support being worked on, it's possible that for optimizations that a node may not have a non-NULL zonelist. When CONFIG_NUMA is enabled and node 0 is memoryless, this means the zonelist for first_online_node may become NULL. The oom killer requires a zonelist that includes all memory zones for the sysrq trigger and pagefault out of memory handler. Ensure that a non-NULL zonelist is always passed to the oom killer. [akpm@linux-foundation.org: fix non-numa build] Signed-off-by: David Rientjes <rientjes@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06memory-hotplug: add zone_for_memory() for selecting zone for new memoryWang Nan
This series of patches fixes a problem when adding memory in bad manner. For example: for a x86_64 machine booted with "mem=400M" and with 2GiB memory installed, following commands cause problem: # echo 0x40000000 > /sys/devices/system/memory/probe [ 28.613895] init_memory_mapping: [mem 0x40000000-0x47ffffff] # echo 0x48000000 > /sys/devices/system/memory/probe [ 28.693675] init_memory_mapping: [mem 0x48000000-0x4fffffff] # echo online_movable > /sys/devices/system/memory/memory9/state # echo 0x50000000 > /sys/devices/system/memory/probe [ 29.084090] init_memory_mapping: [mem 0x50000000-0x57ffffff] # echo 0x58000000 > /sys/devices/system/memory/probe [ 29.151880] init_memory_mapping: [mem 0x58000000-0x5fffffff] # echo online_movable > /sys/devices/system/memory/memory11/state # echo online> /sys/devices/system/memory/memory8/state # echo online> /sys/devices/system/memory/memory10/state # echo offline> /sys/devices/system/memory/memory9/state [ 30.558819] Offlined Pages 32768 # free total used free shared buffers cached Mem: 780588 18014398509432020 830552 0 0 51180 -/+ buffers/cache: 18014398509380840 881732 Swap: 0 0 0 This is because the above commands probe higher memory after online a section with online_movable, which causes ZONE_HIGHMEM (or ZONE_NORMAL for systems without ZONE_HIGHMEM) overlaps ZONE_MOVABLE. After the second online_movable, the problem can be observed from zoneinfo: # cat /proc/zoneinfo ... Node 0, zone Movable pages free 65491 min 250 low 312 high 375 scanned 0 spanned 18446744073709518848 present 65536 managed 65536 ... This series of patches solve the problem by checking ZONE_MOVABLE when choosing zone for new memory. If new memory is inside or higher than ZONE_MOVABLE, makes it go there instead. After applying this series of patches, following are free and zoneinfo result (after offlining memory9): bash-4.2# free total used free shared buffers cached Mem: 780956 80112 700844 0 0 51180 -/+ buffers/cache: 28932 752024 Swap: 0 0 0 bash-4.2# cat /proc/zoneinfo Node 0, zone DMA pages free 3389 min 14 low 17 high 21 scanned 0 spanned 4095 present 3998 managed 3977 nr_free_pages 3389 ... start_pfn: 1 inactive_ratio: 1 Node 0, zone DMA32 pages free 73724 min 341 low 426 high 511 scanned 0 spanned 98304 present 98304 managed 92958 nr_free_pages 73724 ... start_pfn: 4096 inactive_ratio: 1 Node 0, zone Normal pages free 32630 min 120 low 150 high 180 scanned 0 spanned 32768 present 32768 managed 32768 nr_free_pages 32630 ... start_pfn: 262144 inactive_ratio: 1 Node 0, zone Movable pages free 65476 min 241 low 301 high 361 scanned 0 spanned 98304 present 65536 managed 65536 nr_free_pages 65476 ... start_pfn: 294912 inactive_ratio: 1 This patch (of 7): Introduce zone_for_memory() in arch independent code for arch_add_memory() use. Many arch_add_memory() function simply selects ZONE_HIGHMEM or ZONE_NORMAL and add new memory into it. However, with the existance of ZONE_MOVABLE, the selection method should be carefully considered: if new, higher memory is added after ZONE_MOVABLE is setup, the default zone and ZONE_MOVABLE may overlap each other. should_add_memory_movable() checks the status of ZONE_MOVABLE. If it has already contain memory, compare the address of new memory and movable memory. If new memory is higher than movable, it should be added into ZONE_MOVABLE instead of default zone. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "Mel Gorman" <mgorman@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06slub: remove kmemcg id from create_unique_idVladimir Davydov
This function is never called for memcg caches, because they are unmergeable, so remove the dead code. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Reviewed-by: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mm, writeback: prevent race when calculating dirty limitsDavid Rientjes
Setting vm_dirty_bytes and dirty_background_bytes is not protected by any serialization. Therefore, it's possible for either variable to change value after the test in global_dirty_limits() to determine whether available_memory needs to be initialized or not. Always ensure that available_memory is properly initialized. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mm, thp: only collapse hugepages to nodes with affinity for zone_reclaim_modeDavid Rientjes
Commit 9f1b868a13ac ("mm: thp: khugepaged: add policy for finding target node") improved the previous khugepaged logic which allocated a transparent hugepages from the node of the first page being collapsed. However, it is still possible to collapse pages to remote memory which may suffer from additional access latency. With the current policy, it is possible that 255 pages (with PAGE_SHIFT == 12) will be collapsed remotely if the majority are allocated from that node. When zone_reclaim_mode is enabled, it means the VM should make every attempt to allocate locally to prevent NUMA performance degradation. In this case, we do not want to collapse hugepages to remote nodes that would suffer from increased access latency. Thus, when zone_reclaim_mode is enabled, only allow collapsing to nodes with RECLAIM_DISTANCE or less. There is no functional change for systems that disable zone_reclaim_mode. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Bob Liu <bob.liu@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mm/shmem.c: remove the unused gfp arg to shmem_add_to_page_cache()Wang Sheng-Hui
The gfp arg is not used in shmem_add_to_page_cache. Remove this unused arg. Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mm: describe mmap_sem rules for __lock_page_or_retry() and callersPaul Cassella
Add a comment describing the circumstances in which __lock_page_or_retry() will or will not release the mmap_sem when returning 0. Add comments to lock_page_or_retry()'s callers (filemap_fault(), do_swap_page()) noting the impact on VM_FAULT_RETRY returns. Add comments on up the call tree, particularly replacing the false "We return with mmap_sem still held" comments. Signed-off-by: Paul Cassella <cassella@cray.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mm: page_alloc: reduce cost of the fair zone allocation policyMel Gorman
The fair zone allocation policy round-robins allocations between zones within a node to avoid age inversion problems during reclaim. If the first allocation fails, the batch counts are reset and a second attempt made before entering the slow path. One assumption made with this scheme is that batches expire at roughly the same time and the resets each time are justified. This assumption does not hold when zones reach their low watermark as the batches will be consumed at uneven rates. Allocation failure due to watermark depletion result in additional zonelist scans for the reset and another watermark check before hitting the slowpath. On UMA, the benefit is negligible -- around 0.25%. On 4-socket NUMA machine it's variable due to the variability of measuring overhead with the vmstat changes. The system CPU overhead comparison looks like 3.16.0-rc3 3.16.0-rc3 3.16.0-rc3 vanilla vmstat-v5 lowercost-v5 User 746.94 774.56 802.00 System 65336.22 32847.27 40852.33 Elapsed 27553.52 27415.04 27368.46 However it is worth noting that the overall benchmark still completed faster and intuitively it makes sense to take as few passes as possible through the zonelists. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mm: page_alloc: abort fair zone allocation policy when remotes nodes are ↵Mel Gorman
encountered The purpose of numa_zonelist_order=zone is to preserve lower zones for use with 32-bit devices. If locality is preferred then the numa_zonelist_order=node policy should be used. Unfortunately, the fair zone allocation policy overrides this by skipping zones on remote nodes until the lower one is found. While this makes sense from a page aging and performance perspective, it breaks the expected zonelist policy. This patch restores the expected behaviour for zone-list ordering. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>