Age | Commit message (Collapse) | Author |
|
git://git.linaro.org/kernel/linux-linaro-stable.git
* linux-linaro-lsk-v4.4-android: (812 commits)
Linux 4.4.167
mac80211: ignore NullFunc frames in the duplicate detection
mac80211: fix reordering of buffered broadcast packets
mac80211: ignore tx status for PS stations in ieee80211_tx_status_ext
mac80211: Clear beacon_int in ieee80211_do_stop
mac80211_hwsim: Timer should be initialized before device registered
kgdboc: fix KASAN global-out-of-bounds bug in param_set_kgdboc_var()
tty: serial: 8250_mtk: always resume the device in probe.
cifs: Fix separator when building path from dentry
Staging: lustre: remove two build warnings
xhci: Prevent U1/U2 link pm states if exit latency is too long
SUNRPC: Fix leak of krb5p encode pages
virtio/s390: fix race in ccw_io_helper()
virtio/s390: avoid race on vcdev->config
ALSA: pcm: Fix interval evaluation with openmin/max
ALSA: pcm: Call snd_pcm_unlink() conditionally at closing
ALSA: pcm: Fix starvation on down_write_nonblock()
ALSA: hda: Add support for AMD Stoney Ridge
ALSA: usb-audio: Fix UAF decrement if card has no live interfaces in card.c
USB: check usb_get_extra_descriptor for proper size
...
Conflicts:
drivers/gpu/drm/rockchip/rockchip_drm_drv.c
drivers/usb/host/xhci-ring.c
Change-Id: I4304b0875908403a7d88a0d77da52cea04563c11
|
|
commit 2d88a331e48095cf60ad9bdf3177bd401bf99727 upstream.
In case of error, the function gpio_to_desc() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d1aa577f5e191d77d3ad62da93729b5af9532bb4 upstream.
Workqueue, 'set_brightness_work' is used for scheduling brightness control.
This workqueue is canceled when the LED class device is unregistered.
Currently, LED subsystem handles like below.
cancel_work_sync(&led_cdev->set_brightness_work)
led_set_brightness(led_cdev, LED_OFF)
However, this could be a problem.
Workqueue is going to be canceled but LED device needs to be off.
The worst case is null pointer access due to scheduling a workqueue.
LED module is loaded.
LED driver private data is allocated by using devm_zalloc().
LED module is unloaded.
led_classdev_unregister() is called.
cancel_work_sync()
led_set_brightness(led_cdev, LED_OFF)
schedule_work() if LED driver uses brightness_set_blocking()
In the meantime, driver private data will be freed.
..scheduling..
brightness_set_blocking() callback is invoked.
For the brightness control, LED driver tries to access private
data but resource is removed!
To avoid this problem, LED subsystem should turn off the brightness first
and wait for completion.
led_set_brightness(led_cdev, LED_OFF)
flush_work(&led_cdev->set_brightness_work)
It guarantees that LED driver turns off the brightness prior to
resource management.
Cc: linux-leds@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f16703360da7731a057df2ffa902306819c22398 upstream.
Some PWMs are disabled by default or the default pin setting
does not match the LED_OFF state (e.g., active-low leds).
Hence, the driver may end up reporting 0 brightness, but
the leds are actually on using full brightness, because
it never enforces its default configuration.
So enforce it by calling led_pwm_set() after successfully
registering the device.
Tested on a Phytec phyFLEX i.MX6Q board based on kernel
v3.19.5.
Signed-off-by: Markus Hofstaetter <markus.hofstaetter@ait.ac.at>
Tested-by: Markus Hofstaetter <markus.hofstaetter@ait.ac.at>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change-Id: Icd29c4853341947c864f638bc8ea4554f582fa8d
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
|
|
The PWM framework has clarified the concept of reference PWM config (the
platform dependent config retrieved from the DT or the PWM lookup table)
and real PWM state.
Use pwm_get_args() when the PWM user wants to retrieve this reference
config and not the current state.
This is part of the rework allowing the PWM framework to support
hardware readout and expose real PWM state even when the PWM has just
been requested (before the user calls pwm_config/enable/disable()).
Change-Id: I8286b16dc8d828ba8a66a17675fe6fbedcba480b
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
(cherry picked from commit 1b50673dfa6486a69895bd45bb5eeaaede0a2b93)
|
|
git://git.linaro.org/kernel/linux-linaro-stable.git
LSK 18.05 v4.4-android
* tag 'lsk-v4.4-18.05-android': (605 commits)
ANDROID: sdcardfs: Don't d_drop in d_revalidate
goldfish: pipe: ANDROID: mark local functions static
UPSTREAM: ANDROID: binder: prevent transactions into own process.
goldfish: pipe: ANDROID: Add DMA support
UPSTREAM: f2fs: clear PageError on writepage - part 2
UPSTREAM: f2fs: avoid fsync() failure caused by EAGAIN in writepage()
ANDROID: x86_64_cuttlefish_defconfig: Disable KPTI
UPSTREAM: mac80211: ibss: Fix channel type enum in ieee80211_sta_join_ibss()
UPSTREAM: mac80211: Fix clang warning about constant operand in logical operation
UPSTREAM: nl80211: Fix enum type of variable in nl80211_put_sta_rate()
UPSTREAM: sysfs: remove signedness from sysfs_get_dirent
UPSTREAM: tracing: Use cpumask_available() to check if cpumask variable may be used
BACKPORT: clocksource: Use GENMASK_ULL in definition of CLOCKSOURCE_MASK
UPSTREAM: netpoll: Fix device name check in netpoll_setup()
FROMLIST: staging: Fix sparse warnings in vsoc driver.
FROMLIST: staging: vsoc: Fix a i386-randconfig warning.
FROMLIST: staging: vsoc: Create wc kernel mapping for region shm.
goldfish: pipe: ANDROID: Replace writel with gf_write_ptr
goldfish: pipe: ANDROID: Use dev_ logging instead of pr_
goldfish: pipe: ANDROID: fix checkpatch warnings
...
Conflicts:
fs/f2fs/node.c
scripts/Makefile.lib
Change-Id: Ib92d11938a383464249fe6f2dad3ab2a05bc4770
|
|
This patch could reduce the power consumption almost 2ma@5v on
rk3308-evb-v10 boards.
Change-Id: I4ee94524427eda72b0f5b61be46cd7a6d3f6a17d
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
|
|
[ Upstream commit aace34c0bb8ea3c8bdcec865b6a4be4db0a68e33 ]
The driver checks an incorrect flag of functionality of adapter.
When a driver requires i2c_smbus_read_byte_data and
i2c_smbus_write_byte_data, it should check I2C_FUNC_SMBUS_BYTE_DATA
instead I2C_FUNC_I2C.
This patch fixes the problem.
Signed-off-by: Tin Huynh <tnhuynh@apm.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.linaro.org/kernel/linux-linaro-stable.git
* linux-linaro-lsk-v4.4-android: (395 commits)
Linux 4.4.126
net: systemport: Rewrite __bcm_sysport_tx_reclaim()
net: fec: Fix unbalanced PM runtime calls
ieee802154: 6lowpan: fix possible NULL deref in lowpan_device_event()
s390/qeth: on channel error, reject further cmd requests
s390/qeth: lock read device while queueing next buffer
s390/qeth: when thread completes, wake up all waiters
s390/qeth: free netdevice when removing a card
team: Fix double free in error path
skbuff: Fix not waking applications when errors are enqueued
net: Only honor ifindex in IP_PKTINFO if non-0
netlink: avoid a double skb free in genlmsg_mcast()
net/iucv: Free memory obtained by kzalloc
net: ethernet: ti: cpsw: add check for in-band mode setting with RGMII PHY interface
net: ethernet: arc: Fix a potential memory leak if an optional regulator is deferred
l2tp: do not accept arbitrary sockets
ipv6: fix access to non-linear packet in ndisc_fill_redirect_hdr_option()
dccp: check sk for closed state in dccp_sendmsg()
net: Fix hlist corruptions in inet_evict_bucket()
Revert "genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs"
...
Conflicts:
include/linux/usb/quirks.h
Change-Id: I125065cef66846e4cdee799f4b34d07c309d353e
|
|
This reverts commit 20ac8f72514b3af8b62c520d55656ded865eff00, which
was commit 2b83ff96f51d0b039c4561b9f95c824d7bddb85c upstream.
The bug that it should fix was only introduced in Linux 4.7, and
in 4.4 it causes a regression.
Reported-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3b9b95363c45365d606ad4bbba16acca75fdf6d3 upstream.
Per the documentation, use scnprintf instead of sprintf to ensure there
is never more than PAGE_SIZE bytes of trigger names put into the
buffer.
Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
Signed-off-by: Zach Brown <zach.brown@ni.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.linaro.org/kernel/linux-linaro-stable.git
* linux-linaro-lsk-v4.4-android: (660 commits)
ANDROID: keychord: Check for write data size
ANDROID: sdcardfs: Set num in extension_details during make_item
ANDROID: sdcardfs: Hold i_mutex for i_size_write
BACKPORT, FROMGIT: crypto: speck - add test vectors for Speck64-XTS
BACKPORT, FROMGIT: crypto: speck - add test vectors for Speck128-XTS
BACKPORT, FROMGIT: crypto: arm/speck - add NEON-accelerated implementation of Speck-XTS
FROMGIT: crypto: speck - export common helpers
BACKPORT, FROMGIT: crypto: speck - add support for the Speck block cipher
UPSTREAM: ANDROID: binder: synchronize_rcu() when using POLLFREE.
f2fs: updates on v4.16-rc1
BACKPORT: tee: shm: Potential NULL dereference calling tee_shm_register()
BACKPORT: tee: shm: don't put_page on null shm->pages
BACKPORT: tee: shm: make function __tee_shm_alloc static
BACKPORT: tee: optee: check type of registered shared memory
BACKPORT: tee: add start argument to shm_register callback
BACKPORT: tee: optee: fix header dependencies
BACKPORT: tee: shm: inline tee_shm_get_id()
BACKPORT: tee: use reference counting for tee_context
BACKPORT: tee: optee: enable dynamic SHM support
BACKPORT: tee: optee: add optee-specific shared pool implementation
...
Conflicts:
drivers/irqchip/Kconfig
drivers/media/i2c/tc35874x.c
drivers/media/v4l2-core/v4l2-compat-ioctl32.c
drivers/usb/gadget/function/f_fs.c
fs/f2fs/node.c
Change-Id: Icecd73a515821b536fa3d81ea91b63d9b3699916
|
|
[ Upstream commit 2b83ff96f51d0b039c4561b9f95c824d7bddb85c ]
With the current code, the following sequence won't work :
echo timer > trigger
echo 0 > delay_off
* at this point we call
** led_delay_off_store
** led_blink_set
|
|
The name .dev in a struct is normally reserved for a struct device
that is let us say a superclass to the thing described by the struct.
struct gpio_chip stands out by confusingly using a struct device *dev
to point to the parent device (such as a platform_device) that
represents the hardware. As we want to give gpio_chip:s real devices,
this is not working. We need to rename this member to parent.
This was done by two coccinelle scripts, I guess it is possible to
combine them into one, but I don't know such stuff. They look like
this:
@@
struct gpio_chip *var;
@@
-var->dev
+var->parent
and:
@@
struct gpio_chip var;
@@
-var.dev
+var.parent
and:
@@
struct bgpio_chip *var;
@@
-var->gc.dev
+var->gc.parent
Plus a few instances of bgpio that I couldn't figure out how
to teach Coccinelle to rewrite.
This patch hits all over the place, but I *strongly* prefer this
solution to any piecemal approaches that just exercise patch
mechanics all over the place. It mainly hits drivers/gpio and
drivers/pinctrl which is my own backyard anyway.
Change-Id: Ib178cec5ee519164386cb60ba7f6c3f796e84f0e
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Alek Du <alek.du@intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
(cherry picked from commit 58383c78425e4ee1c077253cf297b641c861c02e)
|
|
issue during reboot.
Change-Id: I299ae4c97adde806c10ce74d2b843a82a4956682
Signed-off-by: Wenping Zhang <wenping.zhang@rock-chips.com>
|
|
userspace can control all leds by one ioctl through file node:
/dev/led_multi_ctrl.
Change-Id: I10ac19b86b46b3dc9a88809f1be5ebc95398212c
Signed-off-by: Wenping Zhang <wenping.zhang@rock-chips.com>
|
|
1. fix cpu stall issue during reboot:
In previous code, i2c write and read is executed in function
is31fl32xx_brightness_set,this function may be called in softirq
context if leds are in timer or oneshot trigger, so there are
possibilities cpu will be stalled during led operations.
Here we just move the i2c operation to workqueue to make sure
not in irq context.
2. fix reboot crash issue.
Change-Id: If8520528b092cf4d5c4f1c7dcf2d353acd1c9b9d
Signed-off-by: Wenping Zhang <wenping.zhang@rock-chips.com>
|
|
This function is used for led scrolling, set "default-trigger-delay-ms"
in led dts node to enable this function.
Change-Id: I4dff3ab29d8ef18344df4c3a0f18a595a404154c
Signed-off-by: Wenping Zhang <wenping.zhang@rock-chips.com>
|
|
The is32fl32xx led driver from upstream is written for new led
framework, so just modify this driver for some api difference
between our current led framework.
Change-Id: I0fd9af4bc2cd419d3e0bcd1b2348d34d166d652b
Signed-off-by: Wenping Zhang <wenping.zhang@rock-chips.com>
|
|
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Change-Id: I9b3d30eca632d3cfb958f0b31c067f4a6af2d631
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: linux-leds@vger.kernel.org
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Wenping Zhang <wenping.zhang@rock-chips.com>
(cherry picked from commit 0571753e65b5bf7fe9a50004e9e1367cc4e51d0a)
|
|
Otherwise the driver module will not be automatically probed.
Change-Id: I14c8ee83ed97c3f08013c6aceb1f2c8889afcd94
Fixes: 9d7cffaf99f5 ("leds: Add driver for the ISSI IS31FL32xx family of LED controllers")
Fixes: e0442d7def8f ("leds: Add SN3218 and SN3216 support to the IS31FL32XX driver")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: David Rivshin <drivshin@allworx.com>
Acked-by: David Rivshin <drivshin@allworx.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Wenping Zhang <wenping.zhang@rock-chips.com>
(cherry picked from commit 5706c01fcfb313cef7aed6a283b43c5452cf8336)
|
|
Change-Id: I8cebe3499d52fd8e7b44539455ed957fce004f76
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: David Rivshin <drivshin@allworx.com>
Acked-by: David Rivshin <drivshin@allworx.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Wenping Zhang <wenping.zhang@rock-chips.com>
(cherry picked from commit 1d991b71b4fbbeab319154e9aa2f1e9c94976311)
|
|
Si-En Technology was acquired by ISSI in 2011, and it appears that
the IS31FL3218/IS31FL3216 are just rebranded SN3218/SN3216 devices.
Add the "si-en,sn3218" and "si-en,sn3216" compatible strings into the
IS31FL32XX driver as aliases for the issi equivalents, and update
binding documentation.
Datasheets:
IS31FL3218: http://www.issi.com/WW/pdf/31FL3218.pdf
SN3218: http://www.si-en.com/uploadpdf/s2011517171720.pdf
IS31FL3216: http://www.issi.com/WW/pdf/31FL3216.pdf
SN3216: http://www.si-en.com/uploadpdf/SN3216201152410148.pdf
Change-Id: I05a6e3e618daf2499c2d303f265aaae5cdb4ed85
Signed-off-by: David Rivshin <drivshin@allworx.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Wenping Zhang <wenping.zhang@rock-chips.com>
(cherry picked from commit e0442d7def8f9dccde0d825a01d8a6951aa6e95d)
|
|
The IS31FL32xx family of LED controllers are I2C devices with multiple
constant-current channels, each with independent 256-level PWM control.
Datasheets: http://www.issi.com/US/product-analog-fxled-driver.shtml
This has been tested on the IS31FL3236 and IS31FL3216, on an ARM
(TI am335x) platform.
The programming paradigm of these devices is similar in the following
ways:
- All registers are 8 bit
- All LED control registers are write-only
- Each LED channel has a PWM register (0-255)
- PWM register writes are shadowed until an Update register is poked
- All have a concept of Software Shutdown, which disables output
However, there are some differences in devices:
- 3236/3235 have a separate Control register for each LED,
(3218/3216 pack the enable bits into fewer registers)
- 3236/3235 have a per-channel current divisor setting
- 3236/3235 have a Global Control register that can turn off all LEDs
- 3216 is unique in a number of ways
- OUT9-OUT16 can be configured as GPIOs instead of LED controls
- LEDs can be programmed with an 8-frame animation, with
programmable delay between frames
- LEDs can be modulated by an input audio signal
- Max output current can be adjusted from 1/4 to 2x globally
- Has a Configuration register instead of a Shutdown register
This driver currently only supports the base PWM control function
of these devices. The following features of these devices are not
implemented, although it should be possible to add them in the future:
- All devices are capable of going into a lower-power "software
shutdown" mode.
- The is31fl3236 and is31fl3235 can reduce the max output current
per-channel with a divisor of 1, 2, 3, or 4.
- The is31fl3216 can use some LED channels as GPIOs instead.
- The is31fl3216 can animate LEDs in hardware.
- The is31fl3216 can modulate LEDs according to an audio input.
- The is31fl3216 can reduce/increase max output current globally.
Change-Id: Ie82c99ec43dbbd3175fb29f224812f3b5dc92eb6
Signed-off-by: David Rivshin <drivshin@allworx.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Wenping Zhang <wenping.zhang@rock-chips.com>
(cherry picked from commit 9d7cffaf99f5f7756746a328c2854ebe4ce9f442)
|
|
device_node in init
Pass the more generic fwnode_handle to the init function than the
device_node.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
(cherry picked from commit 048ea05b4f4c8f8cf0a9d4c5fc7d16f867160764)
BUG=b:62359918
TEST=No regression in camera functionality
TEST=Kernel builds and boots
Change-Id: Ied9439f2b96be3afe047b54877703d35074bf455
Signed-off-by: Nathan Ciobanu <nathan.d.ciobanu@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/528620
Commit-Ready: Nathan D Ciobanu <nathan.d.ciobanu@intel.com>
Tested-by: Yong Zhi <yong.zhi@intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
|
|
git://git.linaro.org/kernel/linux-linaro-stable.git
LSK 17.05 v4.4-android
* tag 'lsk-v4.4-17.05-android': (266 commits)
BACKPORT: mm/slab: clean up DEBUG_PAGEALLOC processing code
Linux 4.4.70
UPSTREAM: arm64: hibernate: Support DEBUG_PAGEALLOC
BACKPORT: arm64: vmlinux.ld: Add mmuoff data sections and move mmuoff text into idmap
BACKPORT: arm64: Create sections.h
ANDROID: uid_sys_stats: defer io stats calulation for dead tasks
ANDROID: AVB: Fix linter errors.
ANDROID: AVB: Fix invalidate_vbmeta_submit().
drivers: char: mem: Check for address space wraparound with mmap()
nfsd: encoders mustn't use unitialized values in error cases
drm/edid: Add 10 bpc quirk for LGD 764 panel in HP zBook 17 G2
PCI: Freeze PME scan before suspending devices
PCI: Fix pci_mmap_fits() for HAVE_PCI_RESOURCE_TO_USER platforms
tracing/kprobes: Enforce kprobes teardown after testing
osf_wait4(): fix infoleak
genirq: Fix chained interrupt data ordering
uwb: fix device quirk on big-endian hosts
metag/uaccess: Check access_ok in strncpy_from_user
metag/uaccess: Fix access_ok()
iommu/vt-d: Flush the IOTLB to get rid of the initial kdump mappings
...
|
|
This patch adds basic device tree support for the pca9532 LEDs.
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
(cherry picked from commit fa4191a609f219262a18dd8b02ab7dc30896b707)
Change-Id: I4daef4193eef8c4cad883224048fa0b9ef03558f
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
|
|
commit cbe99c538d1776009e8710755bb6e726f7fffa9b upstream.
gcc gets confused about the control flow in ktd2692_parse_dt(), causing
it to warn about what seems like a potential bug:
drivers/leds/leds-ktd2692.c: In function 'ktd2692_probe':
drivers/leds/leds-ktd2692.c:244:15: error: '*((void *)&led_cfg+8)' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/leds/leds-ktd2692.c:225:7: error: 'led_cfg.flash_max_microamp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/leds/leds-ktd2692.c:232:3: error: 'led_cfg.movie_max_microamp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
The code is fine, and slightly reworking it in an equivalent way lets
gcc figure that out too, which gets rid of the warning.
Fixes: 77e7915b15bb ("leds: ktd2692: Add missing of_node_put")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
Conflicts:
arch/arm/include/asm/arm-cci.h
drivers/android/binder.c
drivers/android/binder_trace.h
drivers/block/zram/Kconfig
drivers/net/wireless/rockchip_wlan/esp8089/esp_premalloc/version.h
include/kvm/arm_arch_timer.h
include/linux/pl320-ipc.h
include/linux/zsmalloc.h
include/uapi/linux/android/binder.h
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"Quite a lot of activity in SPI this cycle, almost all of it in drivers
with a few minor improvements and tweaks in the core.
- Updates to pxa2xx to support Intel Broxton and multiple chip selects.
- Support for big endian in the bcm63xx driver.
- Multiple slave support for the mt8173
- New driver for the auxiliary SPI controller in bcm2835 SoCs.
- Support for Layerscale SoCs in the Freescale DSPI driver"
* tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits)
spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI
spi: pxa2xx: Add support for Intel Broxton
spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals
spi: pxa2xx: Add output control for multiple Intel LPSS chip selects
spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific
spi: Add DSPI support for layerscape family
spi: ti-qspi: improve ->remove() callback
spi/spi-xilinx: Fix race condition on last word read
spi: Drop owner assignment from spi_drivers
spi: Add THIS_MODULE to spi_driver in SPI core
spi: Setup the master controller driver before setting the chipselect
spi: dw: replace magic constant by DW_SPI_DR
spi: mediatek: mt8173 spi multiple devices support
spi: mediatek: handle controller_data in mtk_spi_setup
spi: mediatek: remove mtk_spi_config
spi: mediatek: Update document devicetree bindings to support multiple devices
spi: fix kernel-doc warnings about missing return desc in spi.c
spi: fix kernel-doc warnings about missing return desc in spi.h
spi: pxa2xx: Align a few defines
spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select
...
|
|
'spi/topic/omap-uwire', 'spi/topic/owner', 'spi/topic/pxa' and 'spi/topic/pxa2xx' into spi-next
|
|
for_each_child_of_node performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
local idexpression n;
expression e,r;
@@
for_each_child_of_node(r,n) {
...
(
of_node_put(n);
|
e = n
|
+ of_node_put(n);
? break;
)
...
}
... when != n
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
|
|
for_each_available_child_of_node performs an of_node_get on each
iteration, so a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
expression root,e;
local idexpression child;
@@
for_each_available_child_of_node(root, child) {
... when != of_node_put(child)
when != e = child
(
return child;
|
+ of_node_put(child);
? return ...;
)
...
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
|
|
for_each_available_child_of_node performs an of_node_get on each
iteration, so a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
expression root,e;
local idexpression child;
@@
for_each_available_child_of_node(root, child) {
... when != of_node_put(child)
when != e = child
(
return child;
|
+ of_node_put(child);
? return ...;
)
...
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
|
|
for_each_child_of_node performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
expression root,e;
local idexpression child;
@@
for_each_child_of_node(root, child) {
... when != of_node_put(child)
when != e = child
(
return child;
|
+ of_node_put(child);
? return ...;
)
...
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
|
|
Use of resource managed function devm_led_classdev_register to
make initialization path simpler. Also removed redundant remove
function.
Signed-off-by: Fida Mohammad <fmthoker@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
|
|
Use devm_led_classdev_register instead of led_classdev_register,
removing the redundant net48xx_led_remove function.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
|
|
Use resource-managed function devm_led_classdev_register instead
of led_classdev_register, consequently remove redundant
menf21bmc_led_remove function.
Also drop the unneeded label err_free_leds.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
|
|
Use resource managed function devm_led_classdev_register to make
initialisation path simpler.
Also removed redundant led_classdev_unregister function.
Signed-off-by: Fida Mohammad <fmthoker@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
|
|
add a shutdown function for setting the gpio-leds
into off state when shuting down.
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
|
|
This patch adds more init register configuration options:
- Serial LEDs multiplexing.
- Serial LEDs clock signal low/high polarity.
- Serial LEDs data signal low/high polarity.
- Serial LEDs shift direction inverted/normal.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
|
|
This patch simplifies and improves the code related to
default-state handling.
It also changes the code to power off the LEDs by default.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
|
|
Print invalid LED instead of warning only about maximum LED value.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
|
|
This patch sets the led_classdev max_brightness to the maximum level
value supported by hardware. This allows to get rid of the brightness
conversion operation (from software [0:LED_FULL] to hardware ranges) in
brightness_set().
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
|
|
This patch converts the leds-netxbig driver to use the devres functions
devm_gpio_request_one() and devm_led_classdev_register(). This allows to
simplify the code a bit.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
|
|
This patch adds device tree support for the netxbig LEDs.
This also introduces a additionnal DT binding for the GPIO extension bus
(netxbig-gpio-ext) used to configure the LEDs. Since this bus could also
be used to control other devices, then it seems more suitable to have it
in a separate DT binding.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
|
|
This patch adds possibility to invert heartbeat blinking.
The inverted LED is more time ON then OFF. It's because it looks
better when the heartbeat LED is next to other LED which is most
time ON. The invert value is exported same way via sysfs in file
invert like oneshot. I get inspiration from this trigger.
Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
|
|
Since the API for controlling LED brightness and blinking is defined in
the LED core, move the related timer and work callbacks to the led-core.c,
and initialize them through a new led_core_init API.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Pavel Machek <pavel@ucw.cz>
|